Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

mainline boot: 61 pass, 3 fail (v3.15-7378-g14208b0)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-7378-g14208b0 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.0 sec: PASS da850-evm 0 min 15.1 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.9 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.5 sec: PASS omap5-uevm 1 min 40.0 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 14.6 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.7 sec: PASS armada-370-mirabox 0 min 20.2 sec: FAIL arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.2 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 46.8 sec: PASS legacy,3530beagle 0 min 35.1 sec: PASS (Warnings: 1) omap4-panda 0 min 53.9 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.3 sec: PASS am335x-bone 0 min 24.1 sec: PASS omap3-overo-storm-tobi 0 min 25.1 sec: PASS omap5-uevm 0 min 53.4 sec: PASS (Warnings: 6) omap3-n900 0 min 17.6 sec: PASS legacy,n900 0 min 17.4 sec: PASS (Warnings: 1) omap4-panda-es 0 min 56.0 sec: PASS (Warnings: 1) legacy,3730storm 0 min 20.0 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.3 sec: PASS am335x-boneblack 0 min 21.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.6 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 30.7 sec: PASS am335x-bone 0 min 28.5 sec: PASS tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 55.7 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS ste-snowball 1 min 14.4 sec: PASS tegra30-beaver 0 min 20.4 sec: PASS omap3-n900 0 min 15.1 sec: PASS qcom-apq8074-dragonboard 0 min 18.5 sec: PASS bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS omap3-overo-storm-tobi 0 min 21.4 sec: PASS omap3-beagle-xm 1 min 4.4 sec: PASS exynos5420-arndale-octa 0 min 41.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 1 min 44.1 sec: PASS (Warnings: 6) omap4-panda-es 0 min 54.4 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.8 sec: PASS sun4i-a10-cubieboard 0 min 11.4 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.5 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.0 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.4 sec: FAIL exynos5250-arndale 0 min 34.3 sec: PASS exynos5410-smdk5410 0 min 27.1 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.8 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.2 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 25.7 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.3 sec: PASS Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- hub 2-0:1.0: 1 port detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice rtc-mv d0010300.rtc: rtc core: registered d0010300.rtc as rtc0 request_module: runaway loop modprobe binfmt-4c46 orion_wdt: Initial timeout 229 sec sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mvsdio d00d4000.mvsdio: lacking card detect (fall back to polling) sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered rtc-mv d0010300.rtc: setting system clock to 2014-06-09 06:31:24 UTC (1402295484) ALSA device list: No soundcards found. Freeing unused kernel memory: 216K (c0586000 - c05bc000) request_module: runaway loop modprobe binfmt-4c46 request_module: runaway loop modprobe binfmt-4c46 Failed to execute /init (error -8) mmc0: new high speed SDIO card at address 0001 mwifiex_sdio mmc0:0001:1: Direct firmware load failed with error -2 mwifiex_sdio mmc0:0001:1: Falling back to user helper Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2 Starting init: /sbin/init exists but couldn't execute it (error -8) Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 20.22 seconds. # PYBOOT: Result: FAIL arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 16.247652] of_get_named_gpiod_flags exited with status 0 [ 16.251801] mmcblk0: p1 p2 p3 p4 [ 16.255032] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00b8088 [ 16.262508] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.267443] Modules linked in: [ 16.270481] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-07378-g14208b0 #1 [ 16.279068] Workqueue: kmmcd mmc_rescan [ 16.282869] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.288248] PC is at rescan_partitions+0xb4/0x290 [ 16.292921] LR is at 0xf00b8000 [ 16.296042] pc : [<c01afc68>] lr : [<f00b8000>] psr: 20000113 [ 16.296042] sp : ef0b5c78 ip : 00000000 fp : 00000000 [ 16.307478] r10: 00000000 r9 : ed58ef40 r8 : ef21b200 [ 16.312678] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.319177] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.325678] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.332956] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.338675] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.345000] Stack: (0xef0b5c78 to 0xef0b6000) [ 16.349334] 5c60: c054c3b4 00000001 [ 16.357481] 5c80: ef0b4000 c0387698 00000001 c05284f8 ed5ef4d8 c05283c8 eec24380 ed5ef3a8 [ 16.365626] 5ca0: eec24330 eec24280 00000000 ed5ef3a8 00000000 00000000 00000000 eec24280 [ 16.373771] 5cc0: ef21b200 eec24290 00000001 00000000 00000000 c00e3054 c00e19f4 00000000 [ 16.381916] 5ce0: 00000000 00000001 eec24280 00000000 ef21b270 ef21b20c 00000000 ed5ef2c0 [ 16.390063] 5d00: 00000003 c00e32b8 c052a6cc 00000001 00000003 c0388960 c052a6cc c00e1fc4 [ 16.398208] 5d20: ef0b5d2c c022226c ef21b240 00000001 eec24280 ef21b200 ef21b270 ef21b20c [ 16.406353] 5d40: 00000000 ed5ef2c0 00000003 c01adb7c c01ac9d0 ef21b200 00000080 0b300000 [ 16.414499] 5d60: 00000002 ed6cf000 ed6cbc00 ed6cb800 ed6cb800 ed6cbabc c02bada0 ed6cbc00 [ 16.422644] 5d80: ed6cb800 ed6cbd88 ef0b5dce c02bbca4 00000056 ed6cbc6c 00000003 ed6cf000 [ 16.430790] 5da0: ed6cbc00 c02bc8d4 00000003 ef0b5dce 00000008 ed6dd708 c0469ec4 ed6cba98 [ 16.438935] 5dc0: 00000000 34362e33 42694720 32310000 694b2038 c0000042 00000001 ed6cbc08 [ 16.447081] 5de0: c058dfdc 00000000 c054c33c 00000001 00000000 c054bfc8 ef013c00 c02b113c [ 16.455226] 5e00: c02b1124 c0225d10 00000000 ed6cbc08 c0225ec0 ed6cc408 00000000 c02244ec [ 16.463372] 5e20: ef335698 ef203244 ed6cbc08 ed6cbc3c c054bee8 c0225bec ed6cbc08 ed6cbc08 [ 16.471517] 5e40: c054bee8 c022535c ed6cbc08 00000000 ed6cbc10 c02239c4 ef013c00 c03815dc [ 16.479663] 5e60: c047d004 ef0b5e7c 00061a80 ed6cbc00 ed6cbc08 c0451e40 00000001 c047cfb8 [ 16.487808] 5e80: 00000000 c02b1550 c047cfb8 c0451e40 c047cf74 00000001 ed6cc4~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.38 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.497375] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.505218] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.513244] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.525177] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.532501] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.543975] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.552581] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.564514] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.571838] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.583312] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.591125] HS USB OTG: no transceiver configured [ 3.595825] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.603698] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.611694] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.623626] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.630950] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.642425] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.651062] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.662994] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.670288] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.681762] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.689575] HS USB OTG: no transceiver configured [ 3.694305] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.702148] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.710174] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.722106] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.729400] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.740875] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.749481] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.761413] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.768737] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.780212] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.788024] HS USB OTG: no transceiver configured [ 3.792755] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.800598] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.808593] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.45 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

mainline boot: 31 passed 10 failed (mainline/v3.15-7378-g14208b0)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:23.95 cubie2 multi_v7_defconfig : FAILED 1:40.68 cubie2 multi_lpae_defconfig : FAILED 1:22.15 cubox multi_v7_defconfig : FAILED 1:35.58 omap5uevm omap2plus_defconfig : FAILED 1:46.23 omap5uevm multi_v7_defconfig : FAILED 1:49.27 omap5uevm multi_lpae_defconfig : FAILED 1:43.74 snow multi_v7_defconfig : FAILED 1:13.01 snow multi_lpae_defconfig : FAILED 1:13.71 snowball u8500_defconfig : FAILED 1:49.65 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.88 arndale exynos_defconfig : passed 1:20.34 arndale multi_v7_defconfig : passed 1:40.68 arndale multi_lpae_defconfig : passed 1:24.60 bbb omap2plus_defconfig : passed 1:32.31 bbb multi_v7_defconfig : passed 1:29.09 beaver tegra_defconfig : passed 1:10.56 beaver multi_v7_defconfig : passed 1:15.70 capri bcm_defconfig : passed 0:39.74 capri multi_v7_defconfig : passed 0:40.27 cubie sunxi_defconfig : passed 1:18.72 cubie multi_v7_defconfig : passed 1:28.26 dalmore tegra_defconfig : passed 1:33.14 dalmore multi_v7_defconfig : passed 1:28.05 dalmore multi_lpae_defconfig : passed 1:19.24 hummingboard imx_v6_v7_defconfig : passed 1:30.62 hummingboard multi_v7_defconfig : passed 1:17.32 jetson tegra_defconfig : passed 2:08.51 jetson multi_v7_defconfig : passed 1:07.50 jetson multi_lpae_defconfig : passed 0:56.77 panda omap2plus_defconfig : warnings 1:37.63 panda multi_v7_defconfig : warnings 2:02.96 sama5 sama5_defconfig : passed 2:05.37 seaboard tegra_defconfig : passed 1:15.22 seaboard multi_v7_defconfig : passed 1:17.08 snow exynos_defconfig : passed 1:31.65 snowball multi_v7_defconfig : passed 3:32.12 trimslice tegra_defconfig : passed 1:02.11 trimslice multi_v7_defconfig : passed 1:15.66 wandboard imx_v6_v7_defconfig : passed 1:02.40 wandboard multi_v7_defconfig : passed 1:17.52 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.324196] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333161] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342704] scsi0 : ahci_platform [ 1.346418] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355157] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360807] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368866] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375075] mmc0: new high speed SDHC card at address aaaa [ 1.380954] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387242] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392798] hub 1-0:1.0: USB hub found [ 1.397046] hub 1-0:1.0: 1 port detected [ 1.401143] mmcblk0: p1 [ 1.405424] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411119] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419098] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430473] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437435] hub 2-0:1.0: USB hub found [ 1.441283] hub 2-0:1.0: 1 port detected [ 1.446309] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453009] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460852] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525337] hub 3-0:1.0: USB hub found [ 1.529191] hub 3-0:1.0: 1 port detected [ 1.534202] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.540920] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548782] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610289] hub 4-0:1.0: USB hub found [ 1.614127] hub 4-0:1.0: 1 port detected [ 1.618803] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.706358] No MAC Management Counters available [ 1.711127] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717753] IP-Config: Failed to open eth0 [ 1.721876] IP-Config: No network devices available [ 1.726795] vcc3v0: disabling [ 1.729877] ALSA device list: [ 1.732858] No soundcards found. [ 1.737000] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.319539] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.328506] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.338080] scsi0 : ahci_platform [ 1.341806] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.350554] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.356202] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.364259] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.370465] mmc0: new high speed SDHC card at address aaaa [ 1.376343] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.382619] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.388172] hub 1-0:1.0: USB hub found [ 1.392408] hub 1-0:1.0: 1 port detected [ 1.396501] mmcblk0: p1 [ 1.400890] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.406519] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.414491] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.425811] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.432832] hub 2-0:1.0: USB hub found [ 1.436673] hub 2-0:1.0: 1 port detected [ 1.441678] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.448370] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.456215] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.520658] hub 3-0:1.0: USB hub found [ 1.524536] hub 3-0:1.0: 1 port detected [ 1.529581] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.536305] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.544146] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.605634] hub 4-0:1.0: USB hub found [ 1.609478] hub 4-0:1.0: 1 port detected [ 1.614160] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:17 UTC (17) [ 1.701689] No MAC Management Counters available [ 1.706460] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.713087] IP-Config: Failed to open eth0 [ 1.717209] IP-Config: No network devices available [ 1.722126] vcc3v0: disabling [ 1.725204] ALSA device list: [ 1.728186] No soundcards found. [ 1.732321] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.993856] mmc0: new high speed SDHC card at address aaaa [ 0.999779] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005772] mmcblk0: p1 [ 1.016066] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023547] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029457] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038428] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047321] scsi0 : ahci_platform [ 1.050960] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059237] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064840] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072714] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.095986] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.102957] hub 1-0:1.0: USB hub found [ 1.106791] hub 1-0:1.0: 1 port detected [ 1.111284] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.116927] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124773] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.145981] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152883] hub 2-0:1.0: USB hub found [ 1.156716] hub 2-0:1.0: 1 port detected [ 1.161159] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167840] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175686] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240812] hub 3-0:1.0: USB hub found [ 1.244608] hub 3-0:1.0: 1 port detected [ 1.249117] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255750] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263624] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330842] hub 4-0:1.0: USB hub found [ 1.334628] hub 4-0:1.0: 1 port detected [ 1.338994] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.426007] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442313] No MAC Management Counters available [ 1.447084] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453686] IP-Config: Failed to open eth0 [ 1.457810] IP-Config: No network devices available [ 1.462711] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.240580] SPEAr-ehci: EHCI SPEAr driver [ 1.244682] tegra-ehci: Tegra EHCI driver [ 1.248809] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.254994] ohci-pci: OHCI PCI platform driver [ 1.259499] ohci-platform: OHCI generic platform driver [ 1.264819] ohci-omap3: OHCI OMAP3 driver [ 1.268921] SPEAr-ohci: OHCI SPEAr driver [ 1.273656] usbcore: registered new interface driver usb-storage [ 1.281156] mousedev: PS/2 mouse device common for all mice [ 1.288161] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297499] i2c /dev entries driver [ 1.303415] usbcore: registered new interface driver uvcvideo [ 1.309168] USB Video Class driver (1.1.1) [ 1.313268] gspca_main: v2.14.0 registered [ 1.320486] orion_wdt: Initial timeout 25 sec [ 1.325953] sdhci: Secure Digital Host Controller Interface driver [ 1.332121] sdhci: Copyright(c) Pierre Ossman [ 1.337169] Synopsys Designware Multimedia Card Interface Driver [ 1.343671] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.350070] usbcore: registered new interface driver usbhid [ 1.355633] usbhid: USB HID core driver [ 1.360592] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368702] TCP: cubic registered [ 1.372047] NET: Registered protocol family 17 [ 1.376506] can: controller area network core (rev 20120528 abi 9) [ 1.382747] NET: Registered protocol family 29 [ 1.387193] can: raw protocol (rev 20120528) [ 1.391457] can: broadcast manager protocol (rev 20120528 t) [ 1.397112] can: netlink gateway (rev 20130117) max_hops=1 [ 1.402985] Key type dns_resolver registered [ 1.407454] ThumbEE CPU extension supported. [ 1.411740] Registering SWP/SWPB emulation handler [ 1.416531] PJ4 iWMMXt v2 coprocessor enabled. [ 1.422151] USB Power: 5000 mV [ 1.425717] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-09 23:29:58 UTC (1402356598) [ 1.436255] ALSA device list: [ 1.439206] No soundcards found. [ 1.443130] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.651167] can: raw protocol (rev 20120528) [ 47.651175] can: broadcast manager protocol (rev 20120528 t) [ 47.651187] can: netlink gateway (rev 20130117) max_hops=1 [ 47.651491] Key type dns_resolver registered [ 47.651575] omap_vc_init_channel: No PMIC info for vdd_core [ 47.651578] omap_vp_init: No PMIC info for vdd_core [ 47.651582] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.651584] omap_vp_init: No PMIC info for vdd_mm [ 47.651588] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.651589] omap_vp_init: No PMIC info for vdd_mpu [ 47.651903] ThumbEE CPU extension supported. [ 47.651917] Registering SWP/SWPB emulation handler [ 47.657345] palmas 0-0048: Irq flag is 0x00000000 [ 47.734836] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.741590] mmc0: new high speed MMC card at address 0001 [ 47.747481] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.752308] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.758569] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.765426] smps123: 600 <--> 1500 mV at 1060 mV [ 47.765434] mmcblk0: unknown partition table [ 47.770697] mmcblk0boot1: unknown partition table [ 47.771480] mmcblk0boot0: unknown partition table [ 47.786079] smps45: 600 <--> 1310 mV at 1030 mV [ 47.792502] smps6: 1200 mV [ 47.796471] smps7: 1800 mV [ 47.800576] smps8: 600 <--> 1310 mV at 1040 mV [ 47.806297] smps9: failed to get the current voltage [ 47.811539] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.823597] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.951644] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.096655] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.102740] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.110180] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.117041] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.124750] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.138080] ALSA device list: [ 48.141172] No soundcards found. [ 48.145163] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 48.112029] NET: Registered protocol family 17 [ 48.112056] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.121889] mmcblk0: unknown partition table [ 48.122668] mmcblk0boot1: unknown partition table [ 48.123410] mmcblk0boot0: unknown partition table [ 48.137408] can: controller area network core (rev 20120528 abi 9) [ 48.143906] NET: Registered protocol family 29 [ 48.148548] can: raw protocol (rev 20120528) [ 48.153020] can: broadcast manager protocol (rev 20120528 t) [ 48.158939] can: netlink gateway (rev 20130117) max_hops=1 [ 48.164947] Key type dns_resolver registered [ 48.169477] omap_vc_init_channel: No PMIC info for vdd_core [ 48.175296] omap_vp_init: No PMIC info for vdd_core [ 48.180393] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.186025] omap_vp_init: No PMIC info for vdd_mm [ 48.190938] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.196673] omap_vp_init: No PMIC info for vdd_mpu [ 48.201962] ThumbEE CPU extension supported. [ 48.206436] Registering SWP/SWPB emulation handler [ 48.212659] palmas 0-0048: Irq flag is 0x00000000 [ 48.220381] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.227984] smps123: 600 <--> 1500 mV at 1060 mV [ 48.234117] smps45: 600 <--> 1310 mV at 1030 mV [ 48.240568] smps6: 1200 mV [ 48.244565] smps7: 1800 mV [ 48.248737] smps8: 600 <--> 1310 mV at 1040 mV [ 48.254472] smps9: failed to get the current voltage [ 48.259727] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.271770] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.396533] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.541540] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.547624] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.555051] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.561898] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.569588] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.583009] ALSA device list: [ 48.586099] No soundcards found. [ 48.590097] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.602357] oprofile: using timer interrupt. [ 2.602665] TCP: cubic registered [ 2.602673] Initializing XFRM netlink socket [ 2.602727] NET: Registered protocol family 17 [ 2.602774] NET: Registered protocol family 15 [ 2.602956] Key type dns_resolver registered [ 2.603052] omap_vc_init_channel: No PMIC info for vdd_core [ 2.603055] omap_vp_init: No PMIC info for vdd_core [ 2.603065] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.603068] omap_vp_init: No PMIC info for vdd_mm [ 2.603077] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.603080] omap_vp_init: No PMIC info for vdd_mpu [ 2.603644] ThumbEE CPU extension supported. [ 2.603666] Registering SWP/SWPB emulation handler [ 2.603675] SmartReflex Class3 initialized [ 2.622937] palmas 0-0048: Irq flag is 0x00000000 [ 2.708181] mmcblk0boot1: unknown partition table [ 2.715079] mmcblk0boot0: unknown partition table [ 2.721453] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.772926] smps123: 600 <--> 1500 mV at 1060 mV [ 2.779994] smps45: 600 <--> 1310 mV at 1030 mV [ 2.787316] smps6: 1200 mV [ 2.792046] smps7: 1800 mV [ 2.796938] smps8: 600 <--> 1310 mV at 1040 mV [ 2.803398] smps9: failed to get the current voltage [ 2.809317] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.823645] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.832478] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.839627] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.845680] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.854822] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.864198] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.871163] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.879687] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.888330] sr_init: No PMIC hook to init smartreflex [ 2.893867] sr_init: platform driver register failed for SR [ 2.921873] pbias_mmc_omap5: disabling [ 2.927404] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] .data : 0xc0b82000 - 0xc0c619a0 ( 895 kB) [ 0.000000] .bss : 0xc0c619a8 - 0xc0cad850 ( 304 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.667108] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.667642] Console: colour dummy device 80x30 [ 2889.667654] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.667662] pid_max: default: 32768 minimum: 301 [ 2889.667723] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.667729] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.668003] CPU: Testing write buffer coherency: ok [ 2889.668113] CPU0: update cpu_power 1024 [ 2889.668119] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.668211] Setting up static identity map for 0x4081e168 - 0x4081e200 [ 2889.669307] CPU1: Booted secondary processor [ 2889.669344] CPU1: update cpu_power 1024 [ 2889.669347] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.669391] Brought up 2 CPUs [ 2889.669400] SMP: Total of 2 processors activated. [ 2889.669404] CPU: All CPU(s) started in HYP mode. [ 2889.669408] CPU: Virtualization extensions available. [ 2889.669649] devtmpfs: initialized [ 2889.671515] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.671703] pinctrl core: initialized pinctrl subsystem [ 2889.671903] regulator-dummy: no parameters [ 2889.677880] NET: Registered protocol family 16 [ 2889.678749] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.679450] cpuidle: using governor ladder [ 2889.679459] cpuidle: using governor menu [ 2889.684489] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.688326] No ATAGs~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000000] Memory: 1999004K/2093056K available (6431K kernel code, 891K rwdata, 2572K rodata, 656K init, 300K bss, 94052K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0ad316c (9005 kB) [ 0.000000] .init : 0xc0ad4000 - 0xc0b78100 ( 657 kB) [ 0.000000] .data : 0xc0b7a000 - 0xc0c58ee0 ( 892 kB) [ 0.000000] .bss : 0xc0c58ee8 - 0xc0ca3f10 ( 301 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.625885] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.626427] Console: colour dummy device 80x30 [ 2889.626439] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.626447] pid_max: default: 32768 minimum: 301 [ 2889.626507] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.626512] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.626778] CPU: Testing write buffer coherency: ok [ 2889.626890] CPU0: update cpu_power 1024 [ 2889.626896] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.626993] Setting up static identity map for 0x408170d0 - 0x40817168 [ 2889.628106] CPU1: Booted secondary processor [ 2889.628139] CPU1: update cpu_power 1024 [ 2889.628142] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.628187] Brought up 2 CPUs [ 2889.628196] SMP: Total of 2 processors activated. [ 2889.628200] CPU: All CPU(s) started in HYP mode. [ 2889.628204] CPU: Virtualizati~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.637268] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.645202] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.657104] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.664428] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675903] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.684448] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.696380] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.703704] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.715179] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.722991] HS USB OTG: no transceiver configured [ 3.727691] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.735534] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.743469] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755371] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.762695] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774169] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.782684] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794616] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.801940] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813415] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821228] HS USB OTG: no transceiver configured [ 3.825927] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.833770] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.841705] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853637] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.860931] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872406] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.880950] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.892883] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.900177] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911651] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919464] HS USB OTG: no transceiver configured [ 3.924163] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932037] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.939941] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.951873] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.959167] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970642] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 45 warnings 0 failures (mainline/v3.15-7378-g14208b0)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 14208b0 Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-7378-g14208b0/ Runtime: 46m 16s Passed: 126 Failed: 0 Warnings: 45 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:420:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:539:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:539:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 55 pass, 1 fail (v3.15)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 15.3 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.2 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.1 sec: PASS omap5-uevm 1 min 43.5 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.5 sec: PASS armada-370-mirabox 0 min 19.9 sec: FAIL arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.0 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS omap3-beagle-xm 0 min 46.3 sec: PASS legacy,3530beagle 0 min 31.2 sec: PASS (Warnings: 1) omap4-panda 0 min 51.7 sec: PASS omap3-overo-tobi 0 min 23.2 sec: PASS (Warnings: 1) am335x-bone 0 min 24.1 sec: PASS omap3-overo-storm-tobi 0 min 24.4 sec: PASS omap5-uevm 0 min 53.1 sec: PASS omap3-n900 0 min 17.7 sec: PASS (Warnings: 1) legacy,n900 0 min 17.1 sec: PASS (Warnings: 1) omap4-panda-es 0 min 56.8 sec: PASS legacy,3730storm 0 min 23.2 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.6 sec: PASS ste-snowball 1 min 13.9 sec: PASS tegra30-beaver 0 min 19.4 sec: PASS am335x-boneblack 0 min 21.7 sec: PASS omap3-beagle-xm 0 min 54.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.1 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 55.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.6 sec: PASS sun4i-a10-cubieboard 0 min 16.9 sec: PASS bcm28155-ap 0 min 25.9 sec: PASS omap3-overo-tobi 0 min 26.9 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 15.2 sec: PASS am335x-bone 0 min 23.3 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap5-uevm 1 min 41.7 sec: PASS omap3-n900 0 min 14.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.8 sec: PASS omap4-panda-es 0 min 52.3 sec: PASS imx6dl-wandboard,wand-dual 0 min 14.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 10.6 sec: PASS sun4i-a10-cubieboard 0 min 10.6 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.7 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.3 sec: PASS exynos5250-arndale 0 min 30.2 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.8 sec: PASS imx6q-wandboard 0 min 14.2 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 28.0 sec: PASS arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.5 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 19.8 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.2 sec: PASS Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- orion-ehci d0051000.usb: irq 26, io mem 0xd0051000 orion-ehci d0051000.usb: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice rtc-mv d0010300.rtc: rtc core: registered d0010300.rtc as rtc0 request_module: runaway loop modprobe binfmt-4c46 orion_wdt: Initial timeout 229 sec mvsdio d00d4000.mvsdio: lacking card detect (fall back to polling) usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered rtc-mv d0010300.rtc: setting system clock to 2014-06-08 02:09:11 UTC (1402193351) ALSA device list: No soundcards found. Freeing unused kernel memory: 192K (c0522000 - c0552000) request_module: runaway loop modprobe binfmt-4c46 request_module: runaway loop modprobe binfmt-4c46 Failed to execute /init (error -8) mmc0: new high speed SDIO card at address 0001 mwifiex_sdio mmc0:0001:1: Direct firmware load failed with error -2 mwifiex_sdio mmc0:0001:1: Falling back to user helper Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2 Starting init: /sbin/init exists but couldn't execute it (error -8) Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 19.95 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

mainline boot: 61 pass, 3 fail (v3.15-7252-gf8409ab)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-7252-gf8409ab Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 15.0 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS tegra30-beaver 0 min 17.6 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.0 sec: PASS omap5-uevm 1 min 41.4 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 13.1 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.7 sec: PASS armada-370-mirabox 0 min 20.2 sec: FAIL arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 36.5 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS omap3-beagle-xm 0 min 49.3 sec: PASS legacy,3530beagle 0 min 23.2 sec: PASS (Warnings: 1) omap4-panda 0 min 52.1 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 26.6 sec: PASS am335x-bone 0 min 24.1 sec: PASS omap3-overo-storm-tobi 0 min 22.2 sec: PASS omap5-uevm 0 min 56.3 sec: PASS (Warnings: 6) omap3-n900 0 min 17.7 sec: PASS legacy,n900 0 min 17.1 sec: PASS (Warnings: 1) omap4-panda-es 0 min 50.5 sec: PASS (Warnings: 1) legacy,3730storm 0 min 19.8 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.5 sec: PASS am335x-boneblack 0 min 22.0 sec: PASS sun7i-a20-cubieboard2 0 min 12.8 sec: PASS sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 29.1 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 48.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 11.5 sec: PASS tegra30-beaver 0 min 20.1 sec: PASS omap3-n900 0 min 16.4 sec: PASS qcom-apq8074-dragonboard 0 min 19.5 sec: PASS bcm28155-ap 0 min 27.3 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS omap3-overo-storm-tobi 0 min 21.0 sec: PASS omap3-beagle-xm 0 min 48.9 sec: PASS exynos5420-arndale-octa 0 min 41.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS omap5-uevm 1 min 36.1 sec: PASS (Warnings: 6) omap4-panda-es 0 min 49.9 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 30.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.7 sec: PASS sun4i-a10-cubieboard 0 min 16.3 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.6 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.8 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.4 sec: FAIL exynos5250-arndale 0 min 30.1 sec: PASS exynos5410-smdk5410 0 min 27.1 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.9 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.6 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.8 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.7 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.3 sec: PASS Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- hub 2-0:1.0: 1 port detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice rtc-mv d0010300.rtc: rtc core: registered d0010300.rtc as rtc0 request_module: runaway loop modprobe binfmt-4c46 orion_wdt: Initial timeout 229 sec sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mvsdio d00d4000.mvsdio: lacking card detect (fall back to polling) sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered rtc-mv d0010300.rtc: setting system clock to 2014-06-08 04:12:04 UTC (1402200724) ALSA device list: No soundcards found. Freeing unused kernel memory: 216K (c0580000 - c05b6000) request_module: runaway loop modprobe binfmt-4c46 request_module: runaway loop modprobe binfmt-4c46 Failed to execute /init (error -8) mmc0: new high speed SDIO card at address 0001 mwifiex_sdio mmc0:0001:1: Direct firmware load failed with error -2 mwifiex_sdio mmc0:0001:1: Falling back to user helper Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2 Starting init: /sbin/init exists but couldn't execute it (error -8) Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 20.16 seconds. # PYBOOT: Result: FAIL arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 16.242577] of_get_named_gpiod_flags exited with status 0 [ 16.246734] mmcblk0: p1 p2 p3 p4 [ 16.249970] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00b8088 [ 16.257445] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.262380] Modules linked in: [ 16.265417] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-07252-gf8409ab #1 [ 16.274001] Workqueue: kmmcd mmc_rescan [ 16.277806] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.283184] PC is at rescan_partitions+0xb4/0x290 [ 16.287858] LR is at 0xf00b8000 [ 16.290979] pc : [<c01afea0>] lr : [<f00b8000>] psr: 20000113 [ 16.290979] sp : ef0b5c78 ip : 00000000 fp : 00000000 [ 16.302415] r10: 00000000 r9 : ed72af40 r8 : ed67b200 [ 16.307614] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.314113] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.320614] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.327892] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.333611] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.339937] Stack: (0xef0b5c78 to 0xef0b6000) [ 16.344271] 5c60: c054c3b4 00000001 [ 16.352418] 5c80: ef0b4000 c03878d8 00000001 c05284f8 ed5d74d8 c05283c8 eec24380 ed5d73a8 [ 16.360563] 5ca0: eec24330 eec24280 00000000 ed5d73a8 00000000 00000000 00000000 eec24280 [ 16.368708] 5cc0: ed67b200 eec24290 00000001 00000000 00000000 c00e328c c00e1c2c 00000000 [ 16.376854] 5ce0: 00000000 00000001 eec24280 00000000 ed67b270 ed67b20c 00000000 ed5d72c0 [ 16.384999] 5d00: 00000003 c00e34f0 c052a6cc 00000001 00000003 c0388ba0 c052a6cc c00e21fc [ 16.393145] 5d20: ef0b5d2c c02224ac ed67b240 00000001 eec24280 ed67b200 ed67b270 ed67b20c [ 16.401290] 5d40: 00000000 ed5d72c0 00000003 c01addb4 c01acc08 ed67b200 00000080 0b300000 [ 16.409435] 5d60: 00000002 ef32e400 ef32d400 ef32c800 ef32c800 ef32cabc c02bafe0 ef32d400 [ 16.417581] 5d80: ef32c800 ef32d588 ef0b5dce c02bbee4 00000056 ef32d46c 00000003 ef32e400 [ 16.425727] 5da0: ef32d400 c02bcb14 00000003 ef0b5dce 00000008 ed63d708 c0469ed8 ef32ca98 [ 16.433872] 5dc0: 00000000 34362e33 42694720 32310000 694b2038 c0000042 00000001 ef32d408 [ 16.442018] 5de0: c058dfdc 00000000 c054c33c 00000001 00000000 c054bfc8 ef013c00 c02b137c [ 16.450163] 5e00: c02b1364 c0225f50 00000000 ef32d408 c0226100 ef32c408 00000000 c022472c [ 16.458308] 5e20: ef315698 ed4e0bc4 ef32d408 ef32d43c c054bee8 c0225e2c ef32d408 ef32d408 [ 16.466454] 5e40: c054bee8 c022559c ef32d408 00000000 ef32d410 c0223c04 ef013c00 c038181c [ 16.474599] 5e60: c047d018 ef0b5e7c 00061a80 ef32d400 ef32d408 c0451e54 00000001 c047cfcc [ 16.482745] 5e80: 00000000 c02b1790 c047cfcc c0451e54 c047cf88 0000000~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.40 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ----------------------------------------------

11 years, 5 months

mainline boot: 62 pass, 2 fail (v3.15-7257-g963649d)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-7257-g963649d Failed boot tests (console logs at the end) =========================================== exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 15.0 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 19.9 sec: PASS tegra30-beaver 0 min 18.3 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.2 sec: PASS omap5-uevm 1 min 39.6 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 13.1 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.7 sec: PASS armada-370-mirabox 0 min 21.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 37.0 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 51.2 sec: PASS legacy,3530beagle 0 min 33.1 sec: PASS (Warnings: 1) omap4-panda 0 min 55.4 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.3 sec: PASS am335x-bone 0 min 29.1 sec: PASS omap3-overo-storm-tobi 0 min 24.9 sec: PASS omap5-uevm 0 min 49.9 sec: PASS (Warnings: 6) omap3-n900 0 min 17.8 sec: PASS legacy,n900 0 min 17.8 sec: PASS (Warnings: 1) omap4-panda-es 0 min 55.9 sec: PASS (Warnings: 1) legacy,3730storm 0 min 20.1 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 15.8 sec: PASS sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 28.6 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 53.4 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS ste-snowball 1 min 11.3 sec: PASS tegra30-beaver 0 min 20.2 sec: PASS omap3-n900 0 min 16.7 sec: PASS qcom-apq8074-dragonboard 0 min 19.6 sec: PASS bcm28155-ap 0 min 27.0 sec: PASS omap3-overo-tobi 0 min 22.6 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 48.8 sec: PASS exynos5420-arndale-octa 0 min 43.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.7 sec: PASS omap5-uevm 1 min 40.9 sec: PASS (Warnings: 6) omap4-panda-es 0 min 51.3 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.4 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.5 sec: PASS sun4i-a10-cubieboard 0 min 11.4 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.5 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.9 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 52.5 sec: FAIL exynos5250-arndale 0 min 30.0 sec: PASS exynos5410-smdk5410 0 min 27.3 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.9 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.1 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.4 sec: PASS Console logs for failures ========================= arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- Loading: *################################################################# ################################################################# ############################################################### done Bytes transferred = 2819512 (2b05b8 hex) ARNDALE #tftp 0x22000000 192.168.1.2:buildroot.cpio.gz tftp 0x22000000 192.168.1.2:buildroot.cpio.gz Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.196 Filename 'buildroot.cpio.gz'. Load address: 0x22000000 Loading: *############################################ done Bytes transferred = 642538 (9cdea hex) ARNDALE # tftp 0x23000000 192.168.1.2:tmp/octa-0QUp9a/tmpOlcudI.dtb tftp 0x23000000 192.168.1.2:tmp/octa-0QUp9a/tmpOlcudI.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.196 Filename 'tmp/octa-0QUp9a/tmpOlcudI.dtb'. Load address: 0x23000000 Loading: *### done Bytes transferred = 32956 (80bc hex) ARNDALE # printenv bootargs printenv bootargs bootargs=console=ttySAC3,115200n8 debug earlyprintk clk_ignore_unused ip=::::::none:192.168.1.254 ARNDALE # bootz 0x21000000 - 0x23000000 bootz 0x21000000 - 0x23000000 ## Flattened Device Tree blob at 23000000 Booting using the fdt blob at 0x23000000 Using Device Tree in place at 23000000, end 2300b0bb Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 52.47 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.508209] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.516052] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.524108] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.536041] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.543365] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.554840] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.563446] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.575378] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.582702] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.594177] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.601989] HS USB OTG: no transceiver configured [ 3.606689] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.614562] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.622619] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.634552] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.641876] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.653350] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.661956] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.673889] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.681213] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.692687] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.700500] HS USB OTG: no transceiver configured [ 3.705230] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.713073] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.721099] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.733032] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.740325] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.751831] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.760437] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.772369] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.779663] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.791137] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.798950] HS USB OTG: no transceiver configured [ 3.803680] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.811523] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.819580] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.45 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

OMAP baseline test results for v3.15

by Paul Walmsley

Here are some basic OMAP test results for Linux v3.15. Logs and other details at: http://www.pwsan.com/omap/testlogs/test_v3.15/20140608184455/ Test summary ------------ Build: uImage: Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only, omap1_defconfig_5912osk_only Build: uImage+dtb: Pass ( 9/ 9): omap2plus_defconfig_am33xx_only/am335x-bone, omap2plus_defconfig/omap4-panda, omap2plus_defconfig/omap4-panda-es, omap2plus_defconfig/am3517-evm, omap2plus_defconfig/omap2430-sdp, omap2plus_defconfig/omap3-beagle, omap2plus_defconfig/omap3-beagle-xm, omap2plus_defconfig/omap3-evm-37xx, omap2plus_defconfig/omap4-var-som Build: zImage: Pass (14/14): multi_v7_defconfig, omap2plus_defconfig, omap2plus_defconfig_am33xx_only, omap2plus_defconfig_2430sdp_only, omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm, omap2plus_defconfig_n800_only_a, omap2plus_defconfig_n800_multi_omap2xxx, omap2plus_defconfig_omap2_4_only, omap2plus_defconfig_omap3_4_only, rmk_omap3430_ldp_allnoconfig, rmk_omap3430_ldp_oldconfig, rmk_omap4430_sdp_allnoconfig, rmk_omap4430_sdp_oldconfig Boot to userspace: FAIL ( 1/13): 2430sdp skip ( 2/13): 5912osk, 4460varsomom Pass (10/13): 2420n800, 3517evm, 3530es3beagle, 3730beaglexm, 37xxevm, 4430es2panda, 4460pandaes, am335xbone, am335xbonelt, cmt3517 PM: chip retention via suspend: skip ( 1/ 7): 4460varsomom FAIL ( 2/ 7): 2430sdp, 4430es2panda Pass ( 4/ 7): 3530es3beagle, 3730beaglexm, 37xxevm, 4460pandaes PM: chip retention via dynamic idle: skip ( 1/ 7): 4460varsomom FAIL ( 6/ 7): 2430sdp, 3530es3beagle, 3730beaglexm, 37xxevm, 4430es2panda, 4460pandaes PM: chip off except CORE via suspend: FAIL ( 1/ 1): 3730beaglexm PM: chip off except CORE via dynamic idle: FAIL ( 1/ 1): 3730beaglexm PM: chip off via suspend: skip ( 1/ 5): 4460varsomom FAIL ( 4/ 5): 3530es3beagle, 37xxevm, 4430es2panda, 4460pandaes PM: chip off via dynamic idle: skip ( 1/ 5): 4460varsomom FAIL ( 4/ 5): 3530es3beagle, 37xxevm, 4430es2panda, 4460pandaes vmlinux object size (delta in bytes from test_v3.15-rc8 (fad01e866afdbe01a1f3ec06a39c3a8b9e197014)): text data bss total kernel +466 +32 0 +498 omap1_defconfig +462 +64 0 +526 omap1_defconfig_1510innovator_only +466 +32 0 +498 omap1_defconfig_5912osk_only +638 -8 0 +630 multi_v7_defconfig +650 +64 0 +714 omap2plus_defconfig +622 +64 0 +686 omap2plus_defconfig_2430sdp_only +4682 +64 0 +4746 omap2plus_defconfig_am33xx_only +582 +72 0 +654 omap2plus_defconfig_am43xx_only +586 +56 0 +642 omap2plus_defconfig_cpupm +582 +64 0 +646 omap2plus_defconfig_dra7xx_only +386 -8 0 +378 omap2plus_defconfig_n800_multi_omap2xxx +386 0 0 +386 omap2plus_defconfig_n800_only_a +586 +64 0 +650 omap2plus_defconfig_no_pm +646 +64 0 +710 omap2plus_defconfig_omap2_4_only +646 +64 0 +710 omap2plus_defconfig_omap3_4_only +582 +64 0 +646 omap2plus_defconfig_omap5_only +348 0 -8 +340 rmk_omap3430_ldp_allnoconfig +382 +64 0 +446 rmk_omap3430_ldp_oldconfig +372 0 0 +372 rmk_omap4430_sdp_allnoconfig +510 +64 0 +574 rmk_omap4430_sdp_oldconfig Boot-time memory difference (delta in bytes from test_v3.15-rc8 (fad01e866afdbe01a1f3ec06a39c3a8b9e197014)) avail rsrvd high freed board kconfig -4k 4k . . 2420n800 omap2plus_defconfig_n800_only_a 4k -4k . . 3530es3beagle omap2plus_defconfig cmt3517 works again - Dmitry Lifshitz pointed out that I was using the wrong DT file when I re-enabled it at v3.15-rc8.

11 years, 5 months

mainline boot: 30 passed 10 failed (mainline/v3.15-7257-g963649d)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:23.81 cubie2 multi_v7_defconfig : FAILED 1:34.48 cubie2 multi_lpae_defconfig : FAILED 1:22.27 cubox multi_v7_defconfig : FAILED 1:36.91 omap5uevm omap2plus_defconfig : FAILED 1:46.37 omap5uevm multi_v7_defconfig : FAILED 1:54.71 omap5uevm multi_lpae_defconfig : FAILED 1:47.81 snow multi_v7_defconfig : FAILED 1:13.07 snow multi_lpae_defconfig : FAILED 1:13.48 snowball u8500_defconfig : FAILED 1:56.20 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.14 arndale exynos_defconfig : passed 1:15.81 arndale multi_v7_defconfig : passed 1:36.05 arndale multi_lpae_defconfig : passed 1:23.04 bbb omap2plus_defconfig : warnings 1:43.59 bbb multi_v7_defconfig : passed 1:36.06 beaver tegra_defconfig : passed 0:56.42 capri bcm_defconfig : passed 0:39.25 capri multi_v7_defconfig : passed 0:39.94 cubie sunxi_defconfig : passed 1:04.18 cubie multi_v7_defconfig : passed 1:21.22 dalmore tegra_defconfig : passed 1:24.56 dalmore multi_v7_defconfig : passed 1:21.11 dalmore multi_lpae_defconfig : passed 1:30.24 hummingboard imx_v6_v7_defconfig : passed 1:23.79 hummingboard multi_v7_defconfig : passed 1:19.78 jetson tegra_defconfig : passed 0:58.75 jetson multi_v7_defconfig : passed 1:03.73 jetson multi_lpae_defconfig : passed 1:05.31 panda omap2plus_defconfig : warnings 1:31.75 panda multi_v7_defconfig : warnings 1:56.46 sama5 sama5_defconfig : passed 1:50.49 seaboard tegra_defconfig : passed 1:06.26 seaboard multi_v7_defconfig : passed 1:13.36 snow exynos_defconfig : passed 1:21.60 snowball multi_v7_defconfig : passed 4:43.12 trimslice tegra_defconfig : passed 1:03.69 trimslice multi_v7_defconfig : passed 1:19.81 wandboard imx_v6_v7_defconfig : passed 1:10.82 wandboard multi_v7_defconfig : passed 1:15.25 Offline boards: beaver multi_v7_defconfig : OFFLINE 0:42.10 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.324255] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333226] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342778] scsi0 : ahci_platform [ 1.346486] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355226] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360872] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368929] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375132] mmc0: new high speed SDHC card at address aaaa [ 1.381033] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387311] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392881] hub 1-0:1.0: USB hub found [ 1.397120] hub 1-0:1.0: 1 port detected [ 1.401217] mmcblk0: p1 [ 1.405593] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411218] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419192] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430535] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437504] hub 2-0:1.0: USB hub found [ 1.441359] hub 2-0:1.0: 1 port detected [ 1.446370] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453055] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460895] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525398] hub 3-0:1.0: USB hub found [ 1.529244] hub 3-0:1.0: 1 port detected [ 1.534254] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.540972] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548827] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610372] hub 4-0:1.0: USB hub found [ 1.614212] hub 4-0:1.0: 1 port detected [ 1.618887] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.706432] No MAC Management Counters available [ 1.711211] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717838] IP-Config: Failed to open eth0 [ 1.721965] IP-Config: No network devices available [ 1.726881] vcc3v0: disabling [ 1.729962] ALSA device list: [ 1.732943] No soundcards found. [ 1.737077] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.319043] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.328011] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.337587] scsi0 : ahci_platform [ 1.341306] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.350053] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.355706] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.363761] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.369968] mmc0: new high speed SDHC card at address aaaa [ 1.375842] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.382116] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.387672] hub 1-0:1.0: USB hub found [ 1.391909] hub 1-0:1.0: 1 port detected [ 1.395997] mmcblk0: p1 [ 1.400382] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.406021] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.413996] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.425306] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.432341] hub 2-0:1.0: USB hub found [ 1.436186] hub 2-0:1.0: 1 port detected [ 1.441186] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.447872] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.455729] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.520166] hub 3-0:1.0: USB hub found [ 1.524033] hub 3-0:1.0: 1 port detected [ 1.529063] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.535784] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.543635] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.605134] hub 4-0:1.0: USB hub found [ 1.608975] hub 4-0:1.0: 1 port detected [ 1.613663] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.701190] No MAC Management Counters available [ 1.705961] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.712579] IP-Config: Failed to open eth0 [ 1.716699] IP-Config: No network devices available [ 1.721614] vcc3v0: disabling [ 1.724697] ALSA device list: [ 1.727679] No soundcards found. [ 1.731798] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.983687] mmc0: new high speed SDHC card at address aaaa [ 0.989618] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 0.995622] mmcblk0: p1 [ 1.005893] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.013376] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.019289] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.028260] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.037122] scsi0 : ahci_platform [ 1.040762] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.049036] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.054645] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.062505] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.085817] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.092771] hub 1-0:1.0: USB hub found [ 1.096611] hub 1-0:1.0: 1 port detected [ 1.101093] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.106737] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.114575] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.135808] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.142696] hub 2-0:1.0: USB hub found [ 1.146527] hub 2-0:1.0: 1 port detected [ 1.150968] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.157653] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.165490] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.230627] hub 3-0:1.0: USB hub found [ 1.234418] hub 3-0:1.0: 1 port detected [ 1.238938] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.245573] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.253445] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.320658] hub 4-0:1.0: USB hub found [ 1.324448] hub 4-0:1.0: 1 port detected [ 1.328816] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.415829] ata1: SATA link down (SStatus 0 SControl 300) [ 1.432136] No MAC Management Counters available [ 1.436899] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.443498] IP-Config: Failed to open eth0 [ 1.447623] IP-Config: No network devices available [ 1.452520] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.240680] SPEAr-ehci: EHCI SPEAr driver [ 1.244789] tegra-ehci: Tegra EHCI driver [ 1.248917] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.255100] ohci-pci: OHCI PCI platform driver [ 1.259609] ohci-platform: OHCI generic platform driver [ 1.264929] ohci-omap3: OHCI OMAP3 driver [ 1.269028] SPEAr-ohci: OHCI SPEAr driver [ 1.273764] usbcore: registered new interface driver usb-storage [ 1.281258] mousedev: PS/2 mouse device common for all mice [ 1.288260] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297600] i2c /dev entries driver [ 1.303852] usbcore: registered new interface driver uvcvideo [ 1.309600] USB Video Class driver (1.1.1) [ 1.313695] gspca_main: v2.14.0 registered [ 1.320912] orion_wdt: Initial timeout 25 sec [ 1.326376] sdhci: Secure Digital Host Controller Interface driver [ 1.332540] sdhci: Copyright(c) Pierre Ossman [ 1.337593] Synopsys Designware Multimedia Card Interface Driver [ 1.344091] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.350511] usbcore: registered new interface driver usbhid [ 1.356073] usbhid: USB HID core driver [ 1.361031] ata1: SATA link down (SStatus 0 SControl F300) [ 1.369811] TCP: cubic registered [ 1.373158] NET: Registered protocol family 17 [ 1.377617] can: controller area network core (rev 20120528 abi 9) [ 1.383854] NET: Registered protocol family 29 [ 1.388302] can: raw protocol (rev 20120528) [ 1.392565] can: broadcast manager protocol (rev 20120528 t) [ 1.398221] can: netlink gateway (rev 20130117) max_hops=1 [ 1.404096] Key type dns_resolver registered [ 1.408569] ThumbEE CPU extension supported. [ 1.412850] Registering SWP/SWPB emulation handler [ 1.417640] PJ4 iWMMXt v2 coprocessor enabled. [ 1.423252] USB Power: 5000 mV [ 1.426824] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-08 22:29:52 UTC (1402266592) [ 1.437347] ALSA device list: [ 1.440299] No soundcards found. [ 1.444233] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.671343] can: raw protocol (rev 20120528) [ 47.675813] can: broadcast manager protocol (rev 20120528 t) [ 47.681737] can: netlink gateway (rev 20130117) max_hops=1 [ 47.687765] Key type dns_resolver registered [ 47.692300] mmc0: new high speed MMC card at address 0001 [ 47.692335] omap_vc_init_channel: No PMIC info for vdd_core [ 47.692338] omap_vp_init: No PMIC info for vdd_core [ 47.692342] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.692344] omap_vp_init: No PMIC info for vdd_mm [ 47.692348] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.692350] omap_vp_init: No PMIC info for vdd_mpu [ 47.692659] ThumbEE CPU extension supported. [ 47.692673] Registering SWP/SWPB emulation handler [ 47.702244] palmas 0-0048: Irq flag is 0x00000000 [ 47.744737] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.749559] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.755837] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.762723] mmcblk0: unknown partition table [ 47.768053] mmcblk0boot1: unknown partition table [ 47.773758] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.779143] mmcblk0boot0: unknown partition table [ 47.786471] smps123: 600 <--> 1500 mV at 1060 mV [ 47.792620] smps45: 600 <--> 1310 mV at 1030 mV [ 47.799034] smps6: 1200 mV [ 47.803032] smps7: 1800 mV [ 47.807137] smps8: 600 <--> 1310 mV at 1040 mV [ 47.812873] smps9: failed to get the current voltage [ 47.818117] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.830169] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.956534] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.101545] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.107626] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.115046] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.121901] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.129590] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.143007] ALSA device list: [ 48.146099] No soundcards found. [ 48.150106] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 48.106869] NET: Registered protocol family 17 [ 48.106897] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.116762] mmcblk0: unknown partition table [ 48.117535] mmcblk0boot1: unknown partition table [ 48.118281] mmcblk0boot0: unknown partition table [ 48.132257] can: controller area network core (rev 20120528 abi 9) [ 48.138758] NET: Registered protocol family 29 [ 48.143403] can: raw protocol (rev 20120528) [ 48.147869] can: broadcast manager protocol (rev 20120528 t) [ 48.153791] can: netlink gateway (rev 20130117) max_hops=1 [ 48.159786] Key type dns_resolver registered [ 48.164314] omap_vc_init_channel: No PMIC info for vdd_core [ 48.170135] omap_vp_init: No PMIC info for vdd_core [ 48.175231] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.180868] omap_vp_init: No PMIC info for vdd_mm [ 48.185786] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.191525] omap_vp_init: No PMIC info for vdd_mpu [ 48.196819] ThumbEE CPU extension supported. [ 48.201300] Registering SWP/SWPB emulation handler [ 48.207586] palmas 0-0048: Irq flag is 0x00000000 [ 48.215326] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.222918] smps123: 600 <--> 1500 mV at 1060 mV [ 48.229081] smps45: 600 <--> 1310 mV at 1030 mV [ 48.235531] smps6: 1200 mV [ 48.239529] smps7: 1800 mV [ 48.243668] smps8: 600 <--> 1310 mV at 1040 mV [ 48.249421] smps9: failed to get the current voltage [ 48.254678] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.266721] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.391403] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.536412] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.542498] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.549920] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.556768] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.564469] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.577912] ALSA device list: [ 48.581005] No soundcards found. [ 48.585004] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.630421] Key type dns_resolver registered [ 2.630519] omap_vc_init_channel: No PMIC info for vdd_core [ 2.630523] omap_vp_init: No PMIC info for vdd_core [ 2.630532] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.630535] omap_vp_init: No PMIC info for vdd_mm [ 2.630544] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.630546] omap_vp_init: No PMIC info for vdd_mpu [ 2.631107] ThumbEE CPU extension supported. [ 2.631129] Registering SWP/SWPB emulation handler [ 2.631138] SmartReflex Class3 initialized [ 2.695445] palmas 0-0048: Irq flag is 0x00000000 [ 2.712816] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.720246] mmc0: new high speed MMC card at address 0001 [ 2.727158] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.732281] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.738751] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.748246] mmcblk0: unknown partition table [ 2.755015] mmcblk0boot1: unknown partition table [ 2.761785] mmcblk0boot0: unknown partition table [ 2.782813] smps123: 600 <--> 1500 mV at 1060 mV [ 2.789766] smps45: 600 <--> 1310 mV at 1030 mV [ 2.797112] smps6: 1200 mV [ 2.801843] smps7: 1800 mV [ 2.806765] smps8: 600 <--> 1310 mV at 1040 mV [ 2.813273] smps9: failed to get the current voltage [ 2.819183] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.833521] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.842352] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.849577] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.855637] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.864780] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.874152] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.881111] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.889619] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.898261] sr_init: No PMIC hook to init smartreflex [ 2.903816] sr_init: platform driver register failed for SR [ 2.931814] pbias_mmc_omap5: disabling [ 2.937330] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] .bss : 0xc0c639a8 - 0xc0caf850 ( 304 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000007] Switching to timer-based delay loop [ 2889.679680] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.680212] Console: colour dummy device 80x30 [ 2889.680224] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.680231] pid_max: default: 32768 minimum: 301 [ 2889.680291] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.680297] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.680568] CPU: Testing write buffer coherency: ok [ 2889.680679] CPU0: update cpu_power 1024 [ 2889.680685] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.680777] Setting up static identity map for 0x4081e3d8 - 0x4081e470 [ 2889.681844] CPU1: Booted secondary processor [ 2889.681877] CPU1: update cpu_power 1024 [ 2889.681880] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.681957] Brought up 2 CPUs [ 2889.681965] SMP: Total of 2 processors activated. [ 2889.681969] CPU: All CPU(s) started in HYP mode. [ 2889.681972] CPU: Virtualization extensions available. [ 2889.682213] devtmpfs: initialized [ 2889.684028] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.684214] pinctrl core: initialized pinctrl subsystem [ 2889.684408] regulator-dummy: no parameters [ 2889.690204] NET: Registered protocol family 16 [ 2889.691081] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.691767] cpuidle: using governor ladder [ 2889.691776] cpuidle: using governor menu [ 2889.696741] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.700544] No ATAGs? [ 2889.700562] hw-breakpoint: found 5 ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000000] .data : 0xc0b7a000 - 0xc0c58ee0 ( 892 kB) [ 0.000000] .bss : 0xc0c58ee8 - 0xc0ca3f10 ( 301 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.678105] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.678651] Console: colour dummy device 80x30 [ 2889.678663] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.678671] pid_max: default: 32768 minimum: 301 [ 2889.678731] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.678737] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.679004] CPU: Testing write buffer coherency: ok [ 2889.679113] CPU0: update cpu_power 1024 [ 2889.679119] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.679217] Setting up static identity map for 0x40817340 - 0x408173d8 [ 2889.680291] CPU1: Booted secondary processor [ 2889.680324] CPU1: update cpu_power 1024 [ 2889.680327] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.680403] Brought up 2 CPUs [ 2889.680412] SMP: Total of 2 processors activated. [ 2889.680416] CPU: All CPU(s) started in HYP mode. [ 2889.680419] CPU: Virtualization extensions available. [ 2889.680660] devtmpfs: initialized [ 2889.682515] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.682699] pinctrl core: initialized pinctrl subsystem [ 2889.682895] regulator-dummy: no parameters [ 2889.688612] NET: Registered protocol family 16 [ 2889.689480] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.690168] cpuidle: using governor ladder [ 2889.690177] cpuidle: using governor menu [ 2889.695141] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.539001] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550933] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.558227] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569702] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.578277] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.590209] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597534] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.609008] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616821] HS USB OTG: no transceiver configured [ 3.621551] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629394] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637298] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.649230] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656555] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.668029] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676605] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688537] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695861] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707336] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.715179] HS USB OTG: no transceiver configured [ 3.719879] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727722] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735656] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747589] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754913] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766387] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774963] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786895] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.794219] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805694] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813507] HS USB OTG: no transceiver configured [ 3.818206] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.826080] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833984] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845916] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.853240] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864715] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873291] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 45 warnings 0 failures (mainline/v3.15-7257-g963649d)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 963649d Merge tag 'for-linus-3.16-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-7257-g963649d/ Runtime: 45m 25s Passed: 126 Failed: 0 Warnings: 45 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:420:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:539:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:539:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25634): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 30 passed 9 failed (mainline/v3.15-7252-gf8409ab)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:20.98 cubie2 multi_v7_defconfig : FAILED 1:46.12 cubie2 multi_lpae_defconfig : FAILED 1:23.56 cubox multi_v7_defconfig : FAILED 1:38.92 omap5uevm omap2plus_defconfig : FAILED 1:47.19 omap5uevm multi_lpae_defconfig : FAILED 1:57.85 snow multi_v7_defconfig : FAILED 1:13.07 snow multi_lpae_defconfig : FAILED 1:13.77 snowball u8500_defconfig : FAILED 1:54.58 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:10.57 arndale exynos_defconfig : passed 1:14.14 arndale multi_v7_defconfig : passed 1:31.71 arndale multi_lpae_defconfig : passed 1:20.08 bbb omap2plus_defconfig : passed 1:31.02 beaver tegra_defconfig : passed 0:56.69 beaver multi_v7_defconfig : passed 1:01.18 capri bcm_defconfig : passed 0:39.68 capri multi_v7_defconfig : passed 0:40.62 cubie sunxi_defconfig : passed 1:06.04 cubie multi_v7_defconfig : passed 1:44.10 dalmore tegra_defconfig : passed 1:28.27 dalmore multi_v7_defconfig : passed 1:20.74 dalmore multi_lpae_defconfig : passed 1:26.18 hummingboard imx_v6_v7_defconfig : passed 1:29.29 hummingboard multi_v7_defconfig : passed 1:14.28 jetson tegra_defconfig : passed 1:08.10 jetson multi_v7_defconfig : passed 0:57.77 jetson multi_lpae_defconfig : passed 0:57.33 panda omap2plus_defconfig : warnings 1:33.50 panda multi_v7_defconfig : warnings 1:46.49 sama5 sama5_defconfig : passed 1:52.32 seaboard tegra_defconfig : passed 1:03.05 seaboard multi_v7_defconfig : passed 1:15.62 snow exynos_defconfig : passed 1:29.86 snowball multi_v7_defconfig : passed 3:08.17 trimslice tegra_defconfig : passed 1:04.28 trimslice multi_v7_defconfig : passed 1:24.66 wandboard imx_v6_v7_defconfig : passed 1:07.99 wandboard multi_v7_defconfig : passed 1:25.08 Offline boards: bbb multi_v7_defconfig : OFFLINE 1:49.87 omap5uevm multi_v7_defconfig : OFFLINE 1:04.33 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.324337] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333304] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342871] scsi0 : ahci_platform [ 1.346582] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355325] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360972] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.369033] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375236] mmc0: new high speed SDHC card at address aaaa [ 1.381143] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387428] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.393004] hub 1-0:1.0: USB hub found [ 1.397248] hub 1-0:1.0: 1 port detected [ 1.401348] mmcblk0: p1 [ 1.405718] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411341] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419313] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430622] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437603] hub 2-0:1.0: USB hub found [ 1.441457] hub 2-0:1.0: 1 port detected [ 1.446467] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453149] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460993] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525501] hub 3-0:1.0: USB hub found [ 1.529345] hub 3-0:1.0: 1 port detected [ 1.534354] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.541071] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548929] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610449] hub 4-0:1.0: USB hub found [ 1.614295] hub 4-0:1.0: 1 port detected [ 1.618975] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.706513] No MAC Management Counters available [ 1.711288] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717920] IP-Config: Failed to open eth0 [ 1.722046] IP-Config: No network devices available [ 1.726964] vcc3v0: disabling [ 1.730048] ALSA device list: [ 1.733031] No soundcards found. [ 1.737171] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.328136] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.337696] scsi0 : ahci_platform [ 1.341412] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.350163] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.355815] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.363870] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.370076] mmc0: new high speed SDHC card at address aaaa [ 1.375952] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.382232] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.387792] hub 1-0:1.0: USB hub found [ 1.392017] hub 1-0:1.0: 1 port detected [ 1.396101] mmcblk0: p1 [ 1.400488] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.406126] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.414101] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.425432] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.432456] hub 2-0:1.0: USB hub found [ 1.436291] hub 2-0:1.0: 1 port detected [ 1.441293] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.447975] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.455829] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.520290] hub 3-0:1.0: USB hub found [ 1.524162] hub 3-0:1.0: 1 port detected [ 1.529197] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.535915] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.543768] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.605268] hub 4-0:1.0: USB hub found [ 1.609107] hub 4-0:1.0: 1 port detected [ 1.613783] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.701311] No MAC Management Counters available [ 1.706082] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.712700] IP-Config: Failed to open eth0 [ 1.716819] IP-Config: No network devices available [ 1.721735] vcc3v0: disabling [ 1.724818] ALSA device list: [ 1.727803] No soundcards found. [ 1.731945] ata1: SATA link down (SStatus 0 SControl 300) node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.983661] mmc0: new high speed SDHC card at address aaaa [ 0.989585] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 0.995587] mmcblk0: p1 [ 1.005873] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.013354] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.019264] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.028237] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.037099] scsi0 : ahci_platform [ 1.040740] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.049020] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.054630] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.062493] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.085796] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.092765] hub 1-0:1.0: USB hub found [ 1.096607] hub 1-0:1.0: 1 port detected [ 1.101102] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.106748] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.114589] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.135785] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.142678] hub 2-0:1.0: USB hub found [ 1.146508] hub 2-0:1.0: 1 port detected [ 1.150954] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.157644] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.165483] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.230611] hub 3-0:1.0: USB hub found [ 1.234399] hub 3-0:1.0: 1 port detected [ 1.238911] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.245544] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.253416] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.320638] hub 4-0:1.0: USB hub found [ 1.324426] hub 4-0:1.0: 1 port detected [ 1.328789] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.415814] ata1: SATA link down (SStatus 0 SControl 300) [ 1.432122] No MAC Management Counters available [ 1.436893] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.443490] IP-Config: Failed to open eth0 [ 1.447614] IP-Config: No network devices available [ 1.452513] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.244985] tegra-ehci: Tegra EHCI driver [ 1.249113] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.255295] ohci-pci: OHCI PCI platform driver [ 1.259802] ohci-platform: OHCI generic platform driver [ 1.265115] ohci-omap3: OHCI OMAP3 driver [ 1.269217] SPEAr-ohci: OHCI SPEAr driver [ 1.273957] usbcore: registered new interface driver usb-storage [ 1.281461] mousedev: PS/2 mouse device common for all mice [ 1.288472] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297815] i2c /dev entries driver [ 1.303413] usbcore: registered new interface driver uvcvideo [ 1.309166] USB Video Class driver (1.1.1) [ 1.313268] gspca_main: v2.14.0 registered [ 1.320439] orion_wdt: Initial timeout 25 sec [ 1.325963] sdhci: Secure Digital Host Controller Interface driver [ 1.332129] sdhci: Copyright(c) Pierre Ossman [ 1.337184] Synopsys Designware Multimedia Card Interface Driver [ 1.343683] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.350089] usbcore: registered new interface driver usbhid [ 1.355650] usbhid: USB HID core driver [ 1.360611] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368996] TCP: cubic registered [ 1.372353] NET: Registered protocol family 17 [ 1.376812] can: controller area network core (rev 20120528 abi 9) [ 1.383046] NET: Registered protocol family 29 [ 1.387494] can: raw protocol (rev 20120528) [ 1.391758] can: broadcast manager protocol (rev 20120528 t) [ 1.397414] can: netlink gateway (rev 20130117) max_hops=1 [ 1.403300] Key type dns_resolver registered [ 1.407769] ThumbEE CPU extension supported. [ 1.412050] Registering SWP/SWPB emulation handler [ 1.416832] PJ4 iWMMXt v2 coprocessor enabled. [ 1.422452] USB Power: 5000 mV [ 1.426020] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-08 21:20:12 UTC (1402262412) [ 1.436535] ALSA device list: [ 1.439491] No soundcards found. [ 1.443435] Waiting for root device /dev/mmcblk0p2... node: cubox status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.672062] NET: Registered protocol family 17 [ 47.672091] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.681876] mmcblk0: unknown partition table [ 47.682658] mmcblk0boot1: unknown partition table [ 47.683405] mmcblk0boot0: unknown partition table [ 47.697455] can: controller area network core (rev 20120528 abi 9) [ 47.703958] NET: Registered protocol family 29 [ 47.708612] can: raw protocol (rev 20120528) [ 47.713077] can: broadcast manager protocol (rev 20120528 t) [ 47.718995] can: netlink gateway (rev 20130117) max_hops=1 [ 47.725003] Key type dns_resolver registered [ 47.729546] omap_vc_init_channel: No PMIC info for vdd_core [ 47.735368] omap_vp_init: No PMIC info for vdd_core [ 47.740458] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.746096] omap_vp_init: No PMIC info for vdd_mm [ 47.751013] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.756743] omap_vp_init: No PMIC info for vdd_mpu [ 47.762031] ThumbEE CPU extension supported. [ 47.766503] Registering SWP/SWPB emulation handler [ 47.772739] palmas 0-0048: Irq flag is 0x00000000 [ 47.780479] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.788044] smps123: 600 <--> 1500 mV at 1060 mV [ 47.794176] smps45: 600 <--> 1310 mV at 1030 mV [ 47.800627] smps6: 1200 mV [ 47.804625] smps7: 1800 mV [ 47.808754] smps8: 600 <--> 1310 mV at 1040 mV [ 47.814481] smps9: failed to get the current voltage [ 47.819724] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.831781] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.956513] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.101523] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.107604] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.115030] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.121882] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.129583] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.142962] ALSA device list: [ 48.146061] No soundcards found. [ 48.150074] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.630185] Key type dns_resolver registered [ 2.630279] omap_vc_init_channel: No PMIC info for vdd_core [ 2.630283] omap_vp_init: No PMIC info for vdd_core [ 2.630293] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.630295] omap_vp_init: No PMIC info for vdd_mm [ 2.630304] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.630307] omap_vp_init: No PMIC info for vdd_mpu [ 2.630852] ThumbEE CPU extension supported. [ 2.630874] Registering SWP/SWPB emulation handler [ 2.630883] SmartReflex Class3 initialized [ 2.650459] palmas 0-0048: Irq flag is 0x00000000 [ 2.712812] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.713177] mmc0: new high speed MMC card at address 0001 [ 2.719121] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.719373] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.719570] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.722345] mmcblk0: unknown partition table [ 2.724323] mmcblk0boot1: unknown partition table [ 2.726254] mmcblk0boot0: unknown partition table [ 2.802618] smps123: 600 <--> 1500 mV at 1060 mV [ 2.809534] smps45: 600 <--> 1310 mV at 1030 mV [ 2.817008] smps6: 1200 mV [ 2.821616] smps7: 1800 mV [ 2.826538] smps8: 600 <--> 1310 mV at 1040 mV [ 2.833025] smps9: failed to get the current voltage [ 2.838936] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.853272] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.862109] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.869325] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.875431] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.884537] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.893910] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.900861] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.909379] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.918017] sr_init: No PMIC hook to init smartreflex [ 2.923509] sr_init: platform driver register failed for SR [ 2.951556] pbias_mmc_omap5: disabling [ 2.957041] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.724259] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.724791] Console: colour dummy device 80x30 [ 2889.724802] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.724809] pid_max: default: 32768 minimum: 301 [ 2889.724871] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.724877] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.725150] CPU: Testing write buffer coherency: ok [ 2889.725259] CPU0: update cpu_power 1024 [ 2889.725265] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.725356] Setting up static identity map for 0x4081e3d8 - 0x4081e470 [ 2889.726425] CPU1: Booted secondary processor [ 2889.726461] CPU1: update cpu_power 1024 [ 2889.726465] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.726542] Brought up 2 CPUs [ 2889.726551] SMP: Total of 2 processors activated. [ 2889.726555] CPU: All CPU(s) started in HYP mode. [ 2889.726559] CPU: Virtualization extensions available. [ 2889.726800] devtmpfs: initialized [ 2889.728626] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.728813] pinctrl core: initialized pinctrl subsystem [ 2889.729010] regulator-dummy: no parameters [ 2889.734838] NET: Registered protocol family 16 [ 2889.735714] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.736406] cpuidle: using governor ladder [ 2889.736415] cpuidle: using governor menu [ 2889.741397] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.745209] No ATAGs? [ 2889.745228] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.745233] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.745325] EXYNOS5250 PMU Initialize [ 2889.746525] Serial: AMBA PL011 UART driver [ 2920.594290] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594303] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594588] vbat-supply: no parameters [ 2920.594728] P5.0V_USB3CON: 5000 mV [ 2920.595852] vgaarb: loaded [ 29~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.735223] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.735770] Console: colour dummy device 80x30 [ 2889.735781] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.735789] pid_max: default: 32768 minimum: 301 [ 2889.735848] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.735854] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.736122] CPU: Testing write buffer coherency: ok [ 2889.736233] CPU0: update cpu_power 1024 [ 2889.736238] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.736336] Setting up static identity map for 0x40817340 - 0x408173d8 [ 2889.737414] CPU1: Booted secondary processor [ 2889.737446] CPU1: update cpu_power 1024 [ 2889.737449] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.737525] Brought up 2 CPUs [ 2889.737534] SMP: Total of 2 processors activated. [ 2889.737538] CPU: All CPU(s) started in HYP mode. [ 2889.737541] CPU: Virtualization extensions available. [ 2889.737782] devtmpfs: initialized [ 2889.739637] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.739825] pinctrl core: initialized pinctrl subsystem [ 2889.740023] regulator-dummy: no parameters [ 2889.745772] NET: Registered protocol family 16 [ 2889.746636] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.747330] cpuidle: using governor ladder [ 2889.747338] cpuidle: using governor menu [ 2889.752282] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.756050] No ATAGs? [ 2889.756068] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.756073] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.756169] EXYNOS5250 PMU Initialize [ 2889.757360] Serial: AMBA PL011 UART driver [ 2920.594281] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594293] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594579] vbat-supply: no parameters [ 2920.594712] P5.0V_USB3CON: 5000 mV [ 2920.595844] vgaarb: loaded [ 2920.596128] SCSI subsystem initialized [ 2920.596207] libata version 3.00 loaded. [ 2920.596353] usbcore: registe~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.733856] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745788] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.753112] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764587] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.773101] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.785034] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.792327] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803833] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811645] HS USB OTG: no transceiver configured [ 3.816345] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.824188] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.832122] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.844055] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.851348] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862854] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.871368] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.883300] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890594] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.902069] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909881] HS USB OTG: no transceiver configured [ 3.914611] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.922454] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.930358] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.942291] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949584] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.961090] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.969604] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.969635] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.969635] musb-hdrc musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.969696] HS USB OTG: no transceiver configured [ 3.969726] musb-hdrc musb-hdrc.26.auto: musb_init_controller failed with status -517 [ 3.969726] platform musb-hdrc.26.auto: Driver musb-hdrc requests probe deferral [ 3.970245] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.26.auto [ 3.970245] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.970245] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970275] musb-ux500 musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.970397] Unable to handle kernel paging request at virtual address 03dfc09b [ 4.062469] pgd = 02010010 ~$off # PYBOOT: Exception: timeout

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports