Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

stable boot: 42 boots: 40 pass, 2 fail (v3.12.22)

by Kevin's boot bot

Tree/Branch: stable Git describe: v3.12.22 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-u8500_defconfig da850-evm: FAIL: arm-da8xx_omapl_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 16.7 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.0 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 21.5 sec: PASS sun7i-a20-cubieboard2 0 min 11.6 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 14.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 14.8 sec: PASS imx6q-wandboard 0 min 13.4 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 39.4 sec: PASS am335x-boneblack 0 min 21.8 sec: PASS omap3-beagle-xm 0 min 47.3 sec: PASS legacy,3530beagle 0 min 58.1 sec: PASS omap4-panda 0 min 55.8 sec: PASS omap3-tobi 0 min 21.9 sec: PASS am335x-bone 0 min 23.1 sec: PASS legacy,n900 0 min 15.9 sec: PASS omap4-panda-es 0 min 52.5 sec: PASS legacy,3730storm 0 min 20.9 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS arm-multi_v7_defconfig ---------------------- ste-snowball 0 min 22.9 sec: PASS tegra30-beaver 0 min 16.6 sec: PASS am335x-boneblack 0 min 19.8 sec: PASS omap3-beagle-xm 0 min 43.5 sec: PASS sun7i-a20-cubieboard2 0 min 11.2 sec: PASS armada-370-mirabox 0 min 20.0 sec: PASS omap4-panda 0 min 46.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 11.2 sec: PASS bcm28155-ap 0 min 24.0 sec: PASS imx6dl-wandboard,wand-solo 0 min 14.3 sec: PASS omap3-tobi 0 min 20.2 sec: PASS am335x-bone 0 min 21.6 sec: PASS imx6q-wandboard 0 min 13.0 sec: PASS omap4-panda-es 0 min 52.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 14.0 sec: PASS arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.0 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.6 sec: PASS arm-exynos_defconfig -------------------- exynos5250-arndale 0 min 30.3 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 24.5 sec: FAIL arm-da8xx_omapl_defconfig ------------------------- da850-evm 0 min 13.1 sec: FAIL legacy,da850evm 0 min 14.0 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 14.9 sec: PASS Console logs for failures ========================= arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) List of all partitions: b300 7634944 mmcblk0 driver: mmcblk b301 3968 mmcblk0p1 00000000-01 b302 53248 mmcblk0p2 00000000-02 b303 454656 mmcblk0p3 00000000-03 b318 128 mmcblk0rpmb (driver?) b310 2048 mmcblk0boot1 (driver?) b308 2048 mmcblk0boot0 (driver?) No filesystem could mount root, tried: ext3 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3) CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.12.22 #1 [<c00152e0>] (unwind_backtrace+0x0/0xf8) from [<c00118ac>] (show_stack+0x10/0x14) [<c00118ac>] (show_stack+0x10/0x14) from [<c03992a4>] (dump_stack+0x7c/0xc0) [<c03992a4>] (dump_stack+0x7c/0xc0) from [<c03969ec>] (panic+0x90/0x1e8) [<c03969ec>] (panic+0x90/0x1e8) from [<c04feff4>] (mount_block_root+0x1f4/0x230) [<c04feff4>] (mount_block_root+0x1f4/0x230) from [<c04ff210>] (mount_root+0xf4/0x114) [<c04ff210>] (mount_root+0xf4/0x114) from [<c04ff394>] (prepare_namespace+0x164/0x1b8) [<c04ff394>] (prepare_namespace+0x164/0x1b8) from [<c04fec20>] (kernel_init_freeable+0x180/0x1c8) [<c04fec20>] (kernel_init_freeable+0x180/0x1c8) from [<c0395d08>] (kernel_init+0x8/0xe4) [<c0395d08>] (kernel_init+0x8/0xe4) from [<c000e4f8>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.22 #1 [<c00152e0>] (unwind_backtrace+0x0/0xf8) from [<c00118ac>] (show_stack+0x10/0x14) [<c00118ac>] (show_stack+0x10/0x14) from [<c03992a4>] (dump_stack+0x7c/0xc0) [<c03992a4>] (dump_stack+0x7c/0xc0) from [<c0013804>] (handle_IPI+0xf8/0x11c) [<c0013804>] (handle_IPI+0xf8/0x11c) from [<c0008514>] (gic_handle_irq+0x54/0x5c) [<c0008514>] (gic_handle_irq+0x54/0x5c) from [<c0012380>] (__irq_svc+0x40/0x70) Exception stack(0xc052df68 to 0xc052dfb0) df60: ffffffed 00876000 c0534d68 00000000 c052c000 c0534430 df80: c05343d0 c055fd26 00000001 c039fb7c c055fd26 00000000 00000001 c052dfb0 dfa0: c000f67c c000f674 60000013 ffffffff [<c0012380>] (__irq_svc+0x40/0x70) from [<c000f674>] (arch_cpu_idle+0x28/0x38) [<c000f674>] (arch_cpu_idle+0x28/0x38) from [<c0051788>] (cpu_startup_entry+0x60/0x130) [<c0051788>] (cpu_startup_entry+0x60/0x130) from [<c04fea4c>] (start_kernel+0x2ac/0x300) [<c04fea4c>] (start_kernel+0x2ac/0x300) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 24.51 seconds. # PYBOOT: Result: FAIL arm-da8xx_omapl_defconfig ------------------------- da850-evm: FAIL: last 40 lines of boot log: ------------------------------------------- EMAC: MII PHY configured, RMII PHY will not be functional msgmni has been set to 245 io scheduler noop registered (default) da8xx_lcdc da8xx_lcdc.0: found Sharp_LK043T1DG01 panel Console: switching to colour frame buffer device 60x34 Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25, base_baud = 9375000) is a 16550A serial8250.1: ttyS1 at MMIO 0x1d0c000 (irq = 53, base_baud = 9375000) is a 16550A serial8250.2: ttyS2 at MMIO 0x1d0d000 (irq = 61, base_baud = 9375000) is a 16550A console [ttyS2] enabled brd: module loaded davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 davinci_mdio davinci_mdio.0: detected phy mask fffffffe libphy: davinci_mdio.0: probed davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio-0:00, driver unknown input: gpio-keys-polled as /devices/platform/gpio-keys-polled.1/input/input0 i2c /dev entries driver TCP: cubic registered NET: Registered protocol family 17 deviceless supply cvdd not found, using dummy regulator regulator-dummy: incomplete constraints, leaving on console [netcon0] enabled netconsole: network logging started davinci_emac davinci_emac.1: using random MAC addr: 92:df:5d:69:07:8c VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 Please append a correct "root=" boot option; here are the available partitions: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.22 #1 [<c000d374>] (unwind_backtrace+0x0/0xf0) from [<c000b6ec>] (show_stack+0x10/0x14) [<c000b6ec>] (show_stack+0x10/0x14) from [<c02b274c>] (panic+0x8c/0x1e0) [<c02b274c>] (panic+0x8c/0x1e0) from [<c03c1f28>] (mount_block_root+0x1a0/0x258) [<c03c1f28>] (mount_block_root+0x1a0/0x258) from [<c03c21cc>] (mount_root+0xf0/0x118) [<c03c21cc>] (mount_root+0xf0/0x118) from [<c03c2358>] (prepare_namespace+0x164/0x1c4) [<c03c2358>] (prepare_namespace+0x164/0x1c4) from [<c03c1bb0>] (kernel_init_freeable+0x170/0x1b4) [<c03c1bb0>] (kernel_init_freeable+0x170/0x1b4) from [<c02b1124>] (kernel_init+0x8/0xe4) [<c02b1124>] (kernel_init+0x8/0xe4) from [<c00095b0>] (ret_from_fork+0x14/0x24) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 13.14 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

next boot: 60 boots: 60 pass, 0 fail (next-20140611)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140611 Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.2 sec: PASS da850-evm 0 min 14.9 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.8 sec: PASS tegra30-beaver 0 min 17.6 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.3 sec: PASS omap5-uevm 1 min 47.2 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.8 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.0 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.4 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS omap3-beagle-xm 0 min 48.2 sec: PASS legacy,3530beagle 0 min 23.3 sec: PASS (Warnings: 1) omap4-panda 0 min 56.6 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.3 sec: PASS am335x-bone 0 min 28.9 sec: PASS omap3-overo-storm-tobi 0 min 25.1 sec: PASS omap5-uevm 0 min 54.2 sec: PASS (Warnings: 1) omap3-n900 0 min 17.6 sec: PASS legacy,n900 0 min 17.0 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.3 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.8 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.6 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.4 sec: PASS exynos5410-smdk5410 0 min 28.8 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 18.4 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 49.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 14.7 sec: PASS tegra30-beaver 0 min 19.9 sec: PASS omap3-n900 0 min 16.3 sec: PASS qcom-apq8074-dragonboard 0 min 19.7 sec: PASS bcm28155-ap 0 min 26.5 sec: PASS omap3-overo-tobi 0 min 22.4 sec: PASS omap3-overo-storm-tobi 0 min 24.2 sec: PASS omap3-beagle-xm 0 min 51.8 sec: PASS exynos5420-arndale-octa 0 min 41.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS omap5-uevm 1 min 43.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 51.9 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.4 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 12.7 sec: PASS sun4i-a10-cubieboard 0 min 16.2 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.3 sec: PASS arm-exynos_defconfig -------------------- exynos5250-arndale 0 min 29.9 sec: PASS exynos5410-smdk5410 0 min 27.3 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.6 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.8 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.0 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1)

11 years, 5 months

next boot: 33 passed 3 failed (next/next-20140610)

by Olof's autobooter

Failed boards: snow multi_v7_defconfig : FAILED 1:13.06 snow multi_lpae_defconfig : FAILED 1:13.64 snowball u8500_defconfig : FAILED 1:43.07 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:22.32 arndale exynos_defconfig : passed 1:24.61 arndale multi_v7_defconfig : passed 1:30.29 arndale multi_lpae_defconfig : passed 1:28.75 bbb omap2plus_defconfig : passed 1:31.32 bbb multi_v7_defconfig : passed 1:16.39 beaver multi_v7_defconfig : passed 1:12.59 capri bcm_defconfig : passed 0:38.93 capri multi_v7_defconfig : passed 0:40.59 cubie sunxi_defconfig : passed 1:22.67 cubie multi_v7_defconfig : passed 1:14.29 cubox multi_v7_defconfig : passed 1:15.38 dalmore tegra_defconfig : passed 1:34.95 dalmore multi_v7_defconfig : passed 1:22.09 hummingboard imx_v6_v7_defconfig : passed 1:33.72 hummingboard multi_v7_defconfig : passed 1:15.63 jetson tegra_defconfig : passed 0:58.30 jetson multi_v7_defconfig : passed 1:00.24 jetson multi_lpae_defconfig : passed 0:58.52 omap5uevm omap2plus_defconfig : warnings 1:02.59 omap5uevm multi_v7_defconfig : warnings 2:08.52 omap5uevm multi_lpae_defconfig : warnings 2:05.30 panda omap2plus_defconfig : warnings 1:37.88 panda multi_v7_defconfig : warnings 2:12.09 sama5 sama5_defconfig : warnings 1:59.12 seaboard tegra_defconfig : passed 1:02.49 seaboard multi_v7_defconfig : passed 1:12.93 snow exynos_defconfig : passed 1:31.68 snowball multi_v7_defconfig : passed 3:30.03 trimslice tegra_defconfig : passed 1:07.05 trimslice multi_v7_defconfig : passed 1:05.62 wandboard imx_v6_v7_defconfig : passed 1:07.61 wandboard multi_v7_defconfig : passed 1:01.52 Offline boards: beaver tegra_defconfig : OFFLINE 0:37.73 cubie2 sunxi_defconfig : OFFLINE 1:46.65 cubie2 multi_v7_defconfig : OFFLINE 1:38.09 cubie2 multi_lpae_defconfig : OFFLINE 1:25.54 dalmore multi_lpae_defconfig : OFFLINE 1:45.42 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2889.793539] CPU1: Booted secondary processor [ 2889.793574] CPU1: update cpu_capacity 1024 [ 2889.793577] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.793622] Brought up 2 CPUs [ 2889.793631] SMP: Total of 2 processors activated. [ 2889.793635] CPU: All CPU(s) started in HYP mode. [ 2889.793638] CPU: Virtualization extensions available. [ 2889.793879] devtmpfs: initialized [ 2889.795789] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.795985] pinctrl core: initialized pinctrl subsystem [ 2889.796184] regulator-dummy: no parameters [ 2889.802122] NET: Registered protocol family 16 [ 2889.802991] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.803698] cpuidle: using governor ladder [ 2889.803706] cpuidle: using governor menu [ 2889.808731] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.812569] No ATAGs? [ 2889.812589] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.812593] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.812683] EXYNOS5250 PMU Initialize [ 2889.813889] Serial: AMBA PL011 UART driver [ 2920.594285] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594297] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594588] vbat-supply: no parameters [ 2920.594734] P5.0V_USB3CON: 5000 mV [ 2920.595868] vgaarb: loaded [ 2920.596144] SCSI subsystem initialized [ 2920.596224] libata version 3.00 loaded. [ 2920.596371] usbcore: registered new interface driver usbfs [ 2920.596400] usbcore: registered new interface driver hub [ 2920.596451] usbcore: registered new device driver usb [ 2920.596875] Linux video capture interface: v2.00 [ 2920.596899] pps_core: LinuxPPS API ver. 1 registered [ 2920.596903] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596917] PTP clock support registered [ 2920.596958] EDAC MC: Ver: 3.0.0 [ 2920.597309] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597771] Switched to clocksource arch_sys_counter [ 2920.602025] NET: Registered protocol fa~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.827331] CPU: Virtualization extensions available. [ 2889.827572] devtmpfs: initialized [ 2889.829429] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.829630] pinctrl core: initialized pinctrl subsystem [ 2889.829832] regulator-dummy: no parameters [ 2889.835652] NET: Registered protocol family 16 [ 2889.836522] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.837234] cpuidle: using governor ladder [ 2889.837241] cpuidle: using governor menu [ 2889.842272] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.846099] No ATAGs? [ 2889.846116] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.846121] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.846214] EXYNOS5250 PMU Initialize [ 2889.847416] Serial: AMBA PL011 UART driver [ 2920.594283] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594295] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594584] vbat-supply: no parameters [ 2920.594721] P5.0V_USB3CON: 5000 mV [ 2920.595861] vgaarb: loaded [ 2920.596136] SCSI subsystem initialized [ 2920.596215] libata version 3.00 loaded. [ 2920.596362] usbcore: registered new interface driver usbfs [ 2920.596391] usbcore: registered new interface driver hub [ 2920.596443] usbcore: registered new device driver usb [ 2920.596866] Linux video capture interface: v2.00 [ 2920.596888] pps_core: LinuxPPS API ver. 1 registered [ 2920.596892] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596908] PTP clock support registered [ 2920.596946] EDAC MC: Ver: 3.0.0 [ 2920.597295] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597748] Switched to clocksource arch_sys_counter [ 2920.601979] NET: Registered protocol family 2 [ 2920.602223] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602260] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602334] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602363] TCP: reno registered [ 2920.602369] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602386] UDP-Lite hash table entries: 512 (order: 2, 16384 b~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.549316] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.561248] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.568572] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.580047] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.588623] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.600555] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.607879] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.619354] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.627166] HS USB OTG: no transceiver configured [ 3.631896] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.639739] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.647674] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.659606] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.666931] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.678405] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.686981] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.698913] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.706237] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.717712] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.725524] HS USB OTG: no transceiver configured [ 3.730224] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.738098] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.746032] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.757965] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.765289] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.776763] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.785339] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.797271] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.804595] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.816070] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.823913] HS USB OTG: no transceiver configured [ 3.828613] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.836456] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.844390] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.856323] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.863647] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.875122] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.883728] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

next boot: 38 passed 3 failed (next/next-20140611)

by Olof's autobooter

Failed boards: snow multi_v7_defconfig : FAILED 1:16.99 snow multi_lpae_defconfig : FAILED 1:14.01 snowball u8500_defconfig : FAILED 1:46.53 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.65 arndale exynos_defconfig : passed 1:18.19 arndale multi_v7_defconfig : passed 1:30.28 arndale multi_lpae_defconfig : passed 1:21.74 bbb omap2plus_defconfig : passed 1:35.83 bbb multi_v7_defconfig : passed 1:20.41 beaver tegra_defconfig : passed 0:55.52 beaver multi_v7_defconfig : passed 0:52.96 capri bcm_defconfig : passed 0:39.52 capri multi_v7_defconfig : passed 0:42.11 cubie sunxi_defconfig : passed 1:05.85 cubie multi_v7_defconfig : passed 1:35.51 cubie2 sunxi_defconfig : passed 1:23.29 cubie2 multi_v7_defconfig : passed 1:26.38 cubie2 multi_lpae_defconfig : passed 1:08.03 cubox multi_v7_defconfig : passed 1:05.52 dalmore tegra_defconfig : passed 1:25.28 dalmore multi_v7_defconfig : passed 1:27.24 dalmore multi_lpae_defconfig : passed 1:26.29 hummingboard imx_v6_v7_defconfig : passed 1:23.90 hummingboard multi_v7_defconfig : passed 1:25.68 jetson tegra_defconfig : passed 1:03.31 jetson multi_v7_defconfig : passed 0:55.59 jetson multi_lpae_defconfig : passed 1:03.43 omap5uevm omap2plus_defconfig : warnings 1:05.40 omap5uevm multi_v7_defconfig : warnings 2:03.13 omap5uevm multi_lpae_defconfig : warnings 1:56.25 panda omap2plus_defconfig : warnings 1:36.72 panda multi_v7_defconfig : warnings 1:56.50 sama5 sama5_defconfig : warnings 2:05.11 seaboard tegra_defconfig : passed 1:03.96 seaboard multi_v7_defconfig : passed 1:24.11 snow exynos_defconfig : passed 1:31.37 snowball multi_v7_defconfig : passed 3:23.73 trimslice tegra_defconfig : passed 0:58.43 trimslice multi_v7_defconfig : passed 1:22.63 wandboard imx_v6_v7_defconfig : passed 1:06.85 wandboard multi_v7_defconfig : passed 1:06.85 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2889.825917] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.826109] pinctrl core: initialized pinctrl subsystem [ 2889.826309] regulator-dummy: no parameters [ 2889.832278] NET: Registered protocol family 16 [ 2889.833151] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.833863] cpuidle: using governor ladder [ 2889.833871] cpuidle: using governor menu [ 2889.838911] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.842755] No ATAGs? [ 2889.842775] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.842780] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.842870] EXYNOS5250 PMU Initialize [ 2889.844082] Serial: AMBA PL011 UART driver [ 2920.594292] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594305] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594597] vbat-supply: no parameters [ 2920.594740] P5.0V_USB3CON: 5000 mV [ 2920.595874] vgaarb: loaded [ 2920.596160] SCSI subsystem initialized [ 2920.596240] libata version 3.00 loaded. [ 2920.596389] usbcore: registered new interface driver usbfs [ 2920.596418] usbcore: registered new interface driver hub [ 2920.596468] usbcore: registered new device driver usb [ 2920.596892] Linux video capture interface: v2.00 [ 2920.596916] pps_core: LinuxPPS API ver. 1 registered [ 2920.596921] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596935] PTP clock support registered [ 2920.596972] EDAC MC: Ver: 3.0.0 [ 2920.597326] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597784] Switched to clocksource arch_sys_counter [ 2920.602042] NET: Registered protocol family 2 [ 2920.602291] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602329] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602402] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602429] TCP: reno registered [ 2920.602435] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602453] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602533] NET: Registered protocol family 1 [ ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.887251] cpuidle: using governor ladder [ 2889.887258] cpuidle: using governor menu [ 2889.892305] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.896128] No ATAGs? [ 2889.896147] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.896152] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.896246] EXYNOS5250 PMU Initialize [ 2889.897449] Serial: AMBA PL011 UART driver [ 2920.594280] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594291] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594580] vbat-supply: no parameters [ 2920.594720] P5.0V_USB3CON: 5000 mV [ 2920.595856] vgaarb: loaded [ 2920.596134] SCSI subsystem initialized [ 2920.596211] libata version 3.00 loaded. [ 2920.596357] usbcore: registered new interface driver usbfs [ 2920.596386] usbcore: registered new interface driver hub [ 2920.596435] usbcore: registered new device driver usb [ 2920.596860] Linux video capture interface: v2.00 [ 2920.596882] pps_core: LinuxPPS API ver. 1 registered [ 2920.596886] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596903] PTP clock support registered [ 2920.596938] EDAC MC: Ver: 3.0.0 [ 2920.597291] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597747] Switched to clocksource arch_sys_counter [ 2920.601991] NET: Registered protocol family 2 [ 2920.602233] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602270] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602343] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602372] TCP: reno registered [ 2920.602378] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602395] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602477] NET: Registered protocol family 1 [ 2920.602612] RPC: Registered named UNIX socket transport module. [ 2920.602616] RPC: Registered udp transport module. [ 2920.602620] RPC: Registered tcp transport module. [ 2920.602624] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2920.602635] PCI: CLS 0 bytes, default 64 [ 2920.602988] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters av~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627899] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635833] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647766] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.655059] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.666564] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.675079] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686981] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.694305] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705810] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.713623] HS USB OTG: no transceiver configured [ 3.718322] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.726165] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.734100] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.746032] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.753356] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764831] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.773376] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.785278] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.792602] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.804077] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811920] HS USB OTG: no transceiver configured [ 3.816619] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.824462] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.832397] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.844329] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.851623] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.863128] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.871643] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.883575] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890899] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.902374] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.910156] HS USB OTG: no transceiver configured [ 3.914886] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.922729] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.930664] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.942565] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949890] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.961364] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline boot: 32 passed 8 failed (mainline/v3.15-8556-gdfb9454)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:20.97 cubie2 multi_v7_defconfig : FAILED 1:45.59 cubie2 multi_lpae_defconfig : FAILED 1:22.32 omap5uevm omap2plus_defconfig : FAILED 1:51.96 omap5uevm multi_lpae_defconfig : FAILED 1:43.57 snow multi_v7_defconfig : FAILED 1:13.04 snow multi_lpae_defconfig : FAILED 1:13.58 snowball u8500_defconfig : FAILED 1:52.79 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:08.67 arndale exynos_defconfig : passed 1:19.97 arndale multi_v7_defconfig : passed 1:38.09 arndale multi_lpae_defconfig : passed 1:22.45 bbb omap2plus_defconfig : passed 1:29.81 bbb multi_v7_defconfig : passed 1:28.91 beaver tegra_defconfig : passed 0:59.66 beaver multi_v7_defconfig : passed 0:57.57 capri bcm_defconfig : passed 0:39.24 capri multi_v7_defconfig : passed 0:40.14 cubie sunxi_defconfig : passed 1:16.82 cubie multi_v7_defconfig : passed 1:26.23 cubox multi_v7_defconfig : passed 1:09.97 dalmore tegra_defconfig : passed 1:20.04 dalmore multi_v7_defconfig : passed 1:18.53 dalmore multi_lpae_defconfig : passed 1:32.75 hummingboard imx_v6_v7_defconfig : passed 1:25.89 hummingboard multi_v7_defconfig : passed 1:15.75 jetson tegra_defconfig : passed 1:02.61 jetson multi_v7_defconfig : passed 0:57.20 jetson multi_lpae_defconfig : passed 1:16.91 panda omap2plus_defconfig : warnings 1:36.72 panda multi_v7_defconfig : warnings 1:46.46 sama5 sama5_defconfig : passed 1:50.79 seaboard tegra_defconfig : passed 1:08.20 seaboard multi_v7_defconfig : passed 1:08.03 snow exynos_defconfig : passed 1:30.70 snowball multi_v7_defconfig : passed 3:45.36 trimslice tegra_defconfig : passed 1:01.11 trimslice multi_v7_defconfig : passed 2:12.75 wandboard imx_v6_v7_defconfig : passed 1:01.12 wandboard multi_v7_defconfig : passed 1:14.22 Offline boards: omap5uevm multi_v7_defconfig : OFFLINE 2:31.80 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.329123] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338089] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347646] scsi0 : ahci_platform [ 1.351355] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360095] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365739] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373811] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.380017] mmc0: new high speed SDHC card at address aaaa [ 1.385903] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392179] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397738] hub 1-0:1.0: USB hub found [ 1.401981] hub 1-0:1.0: 1 port detected [ 1.406079] mmcblk0: p1 [ 1.410376] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.416080] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.424056] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435406] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442360] hub 2-0:1.0: USB hub found [ 1.446208] hub 2-0:1.0: 1 port detected [ 1.451211] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457909] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465751] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530267] hub 3-0:1.0: USB hub found [ 1.534117] hub 3-0:1.0: 1 port detected [ 1.539137] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545853] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553692] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615227] hub 4-0:1.0: USB hub found [ 1.619069] hub 4-0:1.0: 1 port detected [ 1.623735] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.711290] No MAC Management Counters available [ 1.716065] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722689] IP-Config: Failed to open eth0 [ 1.726811] IP-Config: No network devices available [ 1.731729] vcc3v0: disabling [ 1.734807] ALSA device list: [ 1.737786] No soundcards found. [ 1.741926] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.333157] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342706] scsi0 : ahci_platform [ 1.346422] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355154] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360803] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368859] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375057] mmc0: new high speed SDHC card at address aaaa [ 1.380936] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387215] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392767] hub 1-0:1.0: USB hub found [ 1.397011] hub 1-0:1.0: 1 port detected [ 1.401102] mmcblk0: p1 [ 1.405414] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411101] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419083] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430475] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437502] hub 2-0:1.0: USB hub found [ 1.441339] hub 2-0:1.0: 1 port detected [ 1.446350] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453037] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460883] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525348] hub 3-0:1.0: USB hub found [ 1.529190] hub 3-0:1.0: 1 port detected [ 1.534225] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.540940] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548782] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610309] hub 4-0:1.0: USB hub found [ 1.614153] hub 4-0:1.0: 1 port detected [ 1.618833] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.706352] No MAC Management Counters available [ 1.711132] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717753] IP-Config: Failed to open eth0 [ 1.721876] IP-Config: No network devices available [ 1.726794] vcc3v0: disabling [ 1.729873] ALSA device list: [ 1.732856] No soundcards found. [ 1.737010] ata1: SATA link down (SStatus 0 SControl 300) node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.993983] mmc0: new high speed SDHC card at address aaaa [ 0.999913] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005914] mmcblk0: p1 [ 1.016190] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023672] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029581] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038554] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047459] scsi0 : ahci_platform [ 1.051112] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059374] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064970] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072840] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096114] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103093] hub 1-0:1.0: USB hub found [ 1.106935] hub 1-0:1.0: 1 port detected [ 1.111400] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117039] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124878] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146104] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152986] hub 2-0:1.0: USB hub found [ 1.156814] hub 2-0:1.0: 1 port detected [ 1.161267] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167946] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175788] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240924] hub 3-0:1.0: USB hub found [ 1.244721] hub 3-0:1.0: 1 port detected [ 1.249239] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255875] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263752] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330954] hub 4-0:1.0: USB hub found [ 1.334737] hub 4-0:1.0: 1 port detected [ 1.339107] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.426131] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442428] No MAC Management Counters available [ 1.447194] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453793] IP-Config: Failed to open eth0 [ 1.457920] IP-Config: No network devices available [ 1.462817] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071697] can: raw protocol (rev 20120528) [ 47.071704] can: broadcast manager protocol (rev 20120528 t) [ 47.071716] can: netlink gateway (rev 20130117) max_hops=1 [ 47.072015] Key type dns_resolver registered [ 47.072095] omap_vc_init_channel: No PMIC info for vdd_core [ 47.072097] omap_vp_init: No PMIC info for vdd_core [ 47.072101] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072103] omap_vp_init: No PMIC info for vdd_mm [ 47.072107] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072109] omap_vp_init: No PMIC info for vdd_mpu [ 47.072427] ThumbEE CPU extension supported. [ 47.072442] Registering SWP/SWPB emulation handler [ 47.077569] palmas 0-0048: Irq flag is 0x00000000 [ 47.155360] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.162004] mmc0: new high speed MMC card at address 0001 [ 47.167947] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.172775] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.179058] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.185530] smps123: 600 <--> 1500 mV at 1060 mV [ 47.190815] mmcblk0: unknown partition table [ 47.196167] mmcblk0boot1: unknown partition table [ 47.201197] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206463] mmcblk0boot0: unknown partition table [ 47.212634] smps6: 1200 mV [ 47.216601] smps7: 1800 mV [ 47.220707] smps8: 600 <--> 1310 mV at 1040 mV [ 47.226443] smps9: failed to get the current voltage [ 47.231698] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.243758] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371865] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516874] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.522962] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530424] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537290] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.545006] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558425] ALSA device list: [ 47.561515] No soundcards found. [ 47.565512] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.037454] Key type dns_resolver registered [ 2.037553] omap_vc_init_channel: No PMIC info for vdd_core [ 2.037557] omap_vp_init: No PMIC info for vdd_core [ 2.037567] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.037570] omap_vp_init: No PMIC info for vdd_mm [ 2.037579] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.037582] omap_vp_init: No PMIC info for vdd_mpu [ 2.038139] ThumbEE CPU extension supported. [ 2.038161] Registering SWP/SWPB emulation handler [ 2.038170] SmartReflex Class3 initialized [ 2.102818] palmas 0-0048: Irq flag is 0x00000000 [ 2.120201] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.126618] mmc0: new high speed MMC card at address 0001 [ 2.134434] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.139547] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.146011] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.155831] mmcblk0: unknown partition table [ 2.162492] mmcblk0boot1: unknown partition table [ 2.169406] mmcblk0boot0: unknown partition table [ 2.189732] smps123: 600 <--> 1500 mV at 1060 mV [ 2.196654] smps45: 600 <--> 1310 mV at 1030 mV [ 2.204030] smps6: 1200 mV [ 2.208760] smps7: 1800 mV [ 2.213675] smps8: 600 <--> 1310 mV at 1040 mV [ 2.220137] smps9: failed to get the current voltage [ 2.226053] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.240416] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.249280] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.257192] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.263249] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.272384] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.281774] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.288740] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.297418] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.306059] sr_init: No PMIC hook to init smartreflex [ 2.311564] sr_init: platform driver register failed for SR [ 2.339788] pbias_mmc_omap5: disabling [ 2.345297] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2889.742867] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.742873] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.743143] CPU: Testing write buffer coherency: ok [ 2889.743257] CPU0: update cpu_power 1024 [ 2889.743263] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.743355] Setting up static identity map for 0x4081e838 - 0x4081e8d0 [ 2889.744446] CPU1: Booted secondary processor [ 2889.744482] CPU1: update cpu_power 1024 [ 2889.744486] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.744531] Brought up 2 CPUs [ 2889.744540] SMP: Total of 2 processors activated. [ 2889.744544] CPU: All CPU(s) started in HYP mode. [ 2889.744547] CPU: Virtualization extensions available. [ 2889.744790] devtmpfs: initialized [ 2889.746663] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.746852] pinctrl core: initialized pinctrl subsystem [ 2889.747052] regulator-dummy: no parameters [ 2889.752967] NET: Registered protocol family 16 [ 2889.753840] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.754543] cpuidle: using governor ladder [ 2889.754551] cpuidle: using governor menu [ 2889.759578] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.763416] No ATAGs? [ 2889.763434] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.763439] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.763532] EXYNOS5250 PMU Initialize [ 2889.764742] Serial: AMBA PL011 UART driver [ 2920.594294] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594305] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594600] vbat-supply: no parameters [ 2920.594743] P5.0V_USB3CON: 5000 mV [ 2920.595873] vgaarb: loaded [ 2920.596157] SCSI subsystem initialized [ 2920.596237] libata version 3.00 loaded. [ 2920.596382] usbcore: registered new interface driver usbfs [ 2920.596411] usbcore: registered new interface driver hub [ 2920.596463] usbcore: registered new device driver usb [ 2920.596879] Linux video capture interface: v2.00 [ 2920.596902] pps_c~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000000] free_area_init_node: node 0, pgdat c0c570c0, node_mem_map ea7d4000 [ 0.000000] DMA zone: 1520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2568 pages used for memmap [ 0.000000] HighMem zone: 328704 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @ea79a000 s8448 r8192 d16128 u32768 [ 0.000000] pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521744 [ 0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1999004K/2093056K available (6435K kernel code, 891K rwdata, 2572K rodata, 656K init, 300K bss, 94052K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0ad4184 (9009 kB) [ 0.000000] .init : 0xc0ad5000 - 0xc0b79100 ( 657 kB) [ 0.000000] .data : 0xc0b7a000 - 0xc0c58dc0 ( 892 kB) [ 0.000000] .bss : 0xc0c58dc8 - 0xc0ca3e18 ( 301 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000007] Switching to timer-based delay loop [ 2889.571469] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.572012] Console: colour dummy device 80x30 [ 2889.572023] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.538574] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550506] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.557800] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569305] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.577880] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.589813] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597106] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608581] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616394] HS USB OTG: no transceiver configured [ 3.621124] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.628967] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.636901] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.648803] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656127] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667602] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676208] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688110] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695434] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.706909] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714721] HS USB OTG: no transceiver configured [ 3.719421] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727294] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735229] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747161] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754486] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.765960] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774536] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786437] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.793762] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805236] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813049] HS USB OTG: no transceiver configured [ 3.817779] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825622] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833557] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845489] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852813] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864288] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.872863] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline boot: 31 passed 9 failed (mainline/v3.15-8369-g2937f5e)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.01 cubie2 multi_v7_defconfig : FAILED 1:43.63 cubie2 multi_lpae_defconfig : FAILED 1:52.27 omap5uevm omap2plus_defconfig : FAILED 1:48.33 omap5uevm multi_v7_defconfig : FAILED 1:54.98 omap5uevm multi_lpae_defconfig : FAILED 1:43.51 snow multi_v7_defconfig : FAILED 1:13.31 snow multi_lpae_defconfig : FAILED 1:13.54 snowball u8500_defconfig : FAILED 1:50.33 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.26 arndale exynos_defconfig : passed 1:19.56 arndale multi_lpae_defconfig : passed 1:29.21 bbb omap2plus_defconfig : passed 1:30.06 bbb multi_v7_defconfig : passed 1:27.71 beaver tegra_defconfig : passed 0:59.62 beaver multi_v7_defconfig : passed 1:08.02 capri bcm_defconfig : passed 0:39.78 capri multi_v7_defconfig : passed 0:40.94 cubie sunxi_defconfig : passed 1:02.19 cubie multi_v7_defconfig : passed 1:29.35 cubox multi_v7_defconfig : passed 1:06.29 dalmore tegra_defconfig : passed 1:21.00 dalmore multi_v7_defconfig : warnings 2:30.76 dalmore multi_lpae_defconfig : passed 1:20.89 hummingboard imx_v6_v7_defconfig : passed 1:24.45 hummingboard multi_v7_defconfig : passed 1:30.09 jetson tegra_defconfig : passed 1:02.68 jetson multi_v7_defconfig : passed 0:56.45 jetson multi_lpae_defconfig : passed 0:59.09 panda omap2plus_defconfig : warnings 1:36.64 panda multi_v7_defconfig : warnings 2:01.33 sama5 sama5_defconfig : passed 1:54.95 seaboard tegra_defconfig : passed 1:12.38 seaboard multi_v7_defconfig : passed 1:10.49 snow exynos_defconfig : passed 1:30.73 snowball multi_v7_defconfig : passed 3:33.43 trimslice tegra_defconfig : passed 1:00.18 trimslice multi_v7_defconfig : passed 1:22.46 wandboard imx_v6_v7_defconfig : passed 1:02.96 wandboard multi_v7_defconfig : passed 1:19.20 Offline boards: arndale multi_v7_defconfig : OFFLINE 1:21.77 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.329089] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338054] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347605] scsi0 : ahci_platform [ 1.351314] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360053] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365703] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373777] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.379984] mmc0: new high speed SDHC card at address aaaa [ 1.385867] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392149] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397705] hub 1-0:1.0: USB hub found [ 1.401939] hub 1-0:1.0: 1 port detected [ 1.406034] mmcblk0: p1 [ 1.410333] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.416035] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.424009] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435355] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442311] hub 2-0:1.0: USB hub found [ 1.446166] hub 2-0:1.0: 1 port detected [ 1.451169] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457866] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465710] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530207] hub 3-0:1.0: USB hub found [ 1.534053] hub 3-0:1.0: 1 port detected [ 1.539058] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545772] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553612] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615176] hub 4-0:1.0: USB hub found [ 1.619016] hub 4-0:1.0: 1 port detected [ 1.623677] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.711232] No MAC Management Counters available [ 1.716007] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722641] IP-Config: Failed to open eth0 [ 1.726766] IP-Config: No network devices available [ 1.731683] vcc3v0: disabling [ 1.734763] ALSA device list: [ 1.737742] No soundcards found. [ 1.741882] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.333125] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342676] scsi0 : ahci_platform [ 1.346392] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355135] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360786] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368836] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375040] mmc0: new high speed SDHC card at address aaaa [ 1.380913] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387188] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392750] hub 1-0:1.0: USB hub found [ 1.396999] hub 1-0:1.0: 1 port detected [ 1.401086] mmcblk0: p1 [ 1.405388] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411093] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419066] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430415] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437427] hub 2-0:1.0: USB hub found [ 1.441272] hub 2-0:1.0: 1 port detected [ 1.446290] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.452971] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460810] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525275] hub 3-0:1.0: USB hub found [ 1.529119] hub 3-0:1.0: 1 port detected [ 1.534152] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.540869] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548710] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610246] hub 4-0:1.0: USB hub found [ 1.614084] hub 4-0:1.0: 1 port detected [ 1.618762] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.706291] No MAC Management Counters available [ 1.711064] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717684] IP-Config: Failed to open eth0 [ 1.721804] IP-Config: No network devices available [ 1.726722] vcc3v0: disabling [ 1.729804] ALSA device list: [ 1.732787] No soundcards found. [ 1.736945] ata1: SATA link down (SStatus 0 SControl 300) node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.994086] mmc0: new high speed SDHC card at address aaaa [ 1.000014] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.006009] mmcblk0: p1 [ 1.016276] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023763] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029676] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038647] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047540] scsi0 : ahci_platform [ 1.051190] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059463] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.065060] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072930] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096199] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103177] hub 1-0:1.0: USB hub found [ 1.107014] hub 1-0:1.0: 1 port detected [ 1.111493] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117133] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124970] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146191] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.153081] hub 2-0:1.0: USB hub found [ 1.156902] hub 2-0:1.0: 1 port detected [ 1.161353] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.168028] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175871] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.241003] hub 3-0:1.0: USB hub found [ 1.244800] hub 3-0:1.0: 1 port detected [ 1.249319] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255952] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263824] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.331046] hub 4-0:1.0: USB hub found [ 1.334830] hub 4-0:1.0: 1 port detected [ 1.339197] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.426218] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442509] No MAC Management Counters available [ 1.447276] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453879] IP-Config: Failed to open eth0 [ 1.458004] IP-Config: No network devices available [ 1.462902] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071622] can: raw protocol (rev 20120528) [ 47.071630] can: broadcast manager protocol (rev 20120528 t) [ 47.071642] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071952] Key type dns_resolver registered [ 47.072028] omap_vc_init_channel: No PMIC info for vdd_core [ 47.072030] omap_vp_init: No PMIC info for vdd_core [ 47.072034] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072036] omap_vp_init: No PMIC info for vdd_mm [ 47.072039] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072041] omap_vp_init: No PMIC info for vdd_mpu [ 47.072350] ThumbEE CPU extension supported. [ 47.072365] Registering SWP/SWPB emulation handler [ 47.077495] palmas 0-0048: Irq flag is 0x00000000 [ 47.155307] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.161926] mmc0: new high speed MMC card at address 0001 [ 47.167868] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.172686] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.178971] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.185439] smps123: 600 <--> 1500 mV at 1060 mV [ 47.190719] mmcblk0: unknown partition table [ 47.196059] mmcblk0boot1: unknown partition table [ 47.201162] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206425] mmcblk0boot0: unknown partition table [ 47.212580] smps6: 1200 mV [ 47.216612] smps7: 1800 mV [ 47.220718] smps8: 600 <--> 1310 mV at 1040 mV [ 47.226467] smps9: failed to get the current voltage [ 47.231717] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.243776] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371783] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516791] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.522881] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530335] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537189] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.544912] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558378] ALSA device list: [ 47.561476] No soundcards found. [ 47.565475] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.537741] NET: Registered protocol family 17 [ 47.537769] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.547339] mmcblk0: unknown partition table [ 47.548112] mmcblk0boot1: unknown partition table [ 47.548872] mmcblk0boot0: unknown partition table [ 47.563129] can: controller area network core (rev 20120528 abi 9) [ 47.569629] NET: Registered protocol family 29 [ 47.574277] can: raw protocol (rev 20120528) [ 47.578740] can: broadcast manager protocol (rev 20120528 t) [ 47.584662] can: netlink gateway (rev 20130117) max_hops=1 [ 47.590672] Key type dns_resolver registered [ 47.595202] omap_vc_init_channel: No PMIC info for vdd_core [ 47.601027] omap_vp_init: No PMIC info for vdd_core [ 47.606116] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.611759] omap_vp_init: No PMIC info for vdd_mm [ 47.616669] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.622392] omap_vp_init: No PMIC info for vdd_mpu [ 47.627681] ThumbEE CPU extension supported. [ 47.632160] Registering SWP/SWPB emulation handler [ 47.638383] palmas 0-0048: Irq flag is 0x00000000 [ 47.646112] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.653670] smps123: 600 <--> 1500 mV at 1060 mV [ 47.659802] smps45: 600 <--> 1310 mV at 1030 mV [ 47.666224] smps6: 1200 mV [ 47.670221] smps7: 1800 mV [ 47.674330] smps8: 600 <--> 1310 mV at 1040 mV [ 47.680050] smps9: failed to get the current voltage [ 47.685296] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.697348] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.821972] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.966981] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.973073] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.980509] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.987368] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.995075] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.008501] ALSA device list: [ 48.011598] No soundcards found. [ 48.015597] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.040916] Key type dns_resolver registered [ 2.041012] omap_vc_init_channel: No PMIC info for vdd_core [ 2.041016] omap_vp_init: No PMIC info for vdd_core [ 2.041026] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.041029] omap_vp_init: No PMIC info for vdd_mm [ 2.041038] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.041041] omap_vp_init: No PMIC info for vdd_mpu [ 2.041587] ThumbEE CPU extension supported. [ 2.041611] Registering SWP/SWPB emulation handler [ 2.041620] SmartReflex Class3 initialized [ 2.106050] palmas 0-0048: Irq flag is 0x00000000 [ 2.123355] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.129765] mmc0: new high speed MMC card at address 0001 [ 2.137564] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.142656] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.149109] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.158794] mmcblk0: unknown partition table [ 2.165320] mmcblk0boot1: unknown partition table [ 2.172167] mmcblk0boot0: unknown partition table [ 2.193270] smps123: 600 <--> 1500 mV at 1060 mV [ 2.200246] smps45: 600 <--> 1310 mV at 1030 mV [ 2.207599] smps6: 1200 mV [ 2.212329] smps7: 1800 mV [ 2.217188] smps8: 600 <--> 1310 mV at 1040 mV [ 2.223675] smps9: failed to get the current voltage [ 2.229588] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.243894] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.252741] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.260654] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.266711] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.275872] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.285277] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.292242] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.300741] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.309385] sr_init: No PMIC hook to init smartreflex [ 2.314905] sr_init: platform driver register failed for SR [ 2.343138] pbias_mmc_omap5: disabling [ 2.348633] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.706321] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.706856] Console: colour dummy device 80x30 [ 2889.706868] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.706875] pid_max: default: 32768 minimum: 301 [ 2889.706937] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.706943] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.707215] CPU: Testing write buffer coherency: ok [ 2889.707324] CPU0: update cpu_power 1024 [ 2889.707330] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.707420] Setting up static identity map for 0x4081e4c0 - 0x4081e558 [ 2889.708515] CPU1: Booted secondary processor [ 2889.708551] CPU1: update cpu_power 1024 [ 2889.708554] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.708596] Brought up 2 CPUs [ 2889.708604] SMP: Total of 2 processors activated. [ 2889.708608] CPU: All CPU(s) started in HYP mode. [ 2889.708612] CPU: Virtualization extensions available. [ 2889.708852] devtmpfs: initialized [ 2889.710728] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.710914] pinctrl core: initialized pinctrl subsystem [ 2889.711111] regulator-dummy: no parameters [ 2889.717022] NET: Registered protocol family 16 [ 2889.717910] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.718617] cpuidle: using governor ladder [ 2889.718625] cpuidle: using governor menu [ 2889.723653] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.727502] No ATAGs? [ 2889.727520] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.727525] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.727619] EXYNOS5250 PMU Initialize [ 2889.728824] Serial: AMBA PL011 UART driver [ 2920.594294] edma-dma-engine edma-d~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.727853] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.728402] Console: colour dummy device 80x30 [ 2889.728412] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.728420] pid_max: default: 32768 minimum: 301 [ 2889.728480] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.728486] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.728754] CPU: Testing write buffer coherency: ok [ 2889.728863] CPU0: update cpu_power 1024 [ 2889.728869] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.728966] Setting up static identity map for 0x40817448 - 0x408174e0 [ 2889.730085] CPU1: Booted secondary processor [ 2889.730124] CPU1: update cpu_power 1024 [ 2889.730127] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.730173] Brought up 2 CPUs [ 2889.730182] SMP: Total of 2 processors activated. [ 2889.730186] CPU: All CPU(s) started in HYP mode. [ 2889.730189] CPU: Virtualization extensions available. [ 2889.730431] devtmpfs: initialized [ 2889.732330] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.732516] pinctrl core: initialized pinctrl subsystem [ 2889.732718] regulator-dummy: no parameters [ 2889.738594] NET: Registered protocol family 16 [ 2889.739456] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.740162] cpuidle: using governor ladder [ 2889.740170] cpuidle: using governor menu [ 2889.745236] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.749091] No ATAGs? [ 2889.749109] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.749114] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.749210] EXYNOS5250 PMU Initialize [ 2889.750410] Serial: AMBA PL011 UART driver [ 2920.594310] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594323] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594616] vbat-supply: n~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.538787] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550720] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.558044] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569519] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.578094] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.590026] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597320] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608795] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616607] HS USB OTG: no transceiver configured [ 3.621337] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629180] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637115] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.649047] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656341] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667816] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676422] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688354] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695648] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707153] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714965] HS USB OTG: no transceiver configured [ 3.719665] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727508] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735443] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747375] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754669] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766174] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774749] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786682] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.794006] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805480] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813293] HS USB OTG: no transceiver configured [ 3.817993] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825836] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833770] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845703] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852996] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864501] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873046] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline boot: 32 passed 9 failed (mainline/v3.15-8351-g9ee4d7a)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.22 cubie2 multi_v7_defconfig : FAILED 1:37.35 cubie2 multi_lpae_defconfig : FAILED 1:21.78 omap5uevm omap2plus_defconfig : FAILED 1:42.97 omap5uevm multi_v7_defconfig : FAILED 1:50.26 omap5uevm multi_lpae_defconfig : FAILED 1:43.52 snow multi_v7_defconfig : FAILED 1:13.29 snow multi_lpae_defconfig : FAILED 1:14.09 snowball u8500_defconfig : FAILED 1:46.68 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.37 arndale exynos_defconfig : passed 1:19.29 arndale multi_v7_defconfig : passed 1:40.84 arndale multi_lpae_defconfig : passed 1:27.13 bbb omap2plus_defconfig : passed 1:31.02 bbb multi_v7_defconfig : passed 1:27.11 beaver tegra_defconfig : passed 1:04.73 beaver multi_v7_defconfig : passed 0:57.68 capri bcm_defconfig : passed 0:38.86 capri multi_v7_defconfig : passed 0:46.71 cubie sunxi_defconfig : passed 1:15.11 cubie multi_v7_defconfig : passed 1:21.34 cubox multi_v7_defconfig : passed 1:19.71 dalmore tegra_defconfig : passed 1:33.39 dalmore multi_v7_defconfig : passed 1:20.48 dalmore multi_lpae_defconfig : passed 1:29.42 hummingboard imx_v6_v7_defconfig : passed 1:36.08 hummingboard multi_v7_defconfig : passed 1:07.42 jetson tegra_defconfig : passed 0:57.18 jetson multi_v7_defconfig : passed 0:56.34 jetson multi_lpae_defconfig : passed 1:07.88 panda omap2plus_defconfig : warnings 1:35.11 panda multi_v7_defconfig : warnings 2:05.83 sama5 sama5_defconfig : passed 1:53.99 seaboard tegra_defconfig : passed 1:01.73 seaboard multi_v7_defconfig : passed 1:22.56 snow exynos_defconfig : passed 1:19.16 snowball multi_v7_defconfig : passed 4:50.70 trimslice tegra_defconfig : passed 1:08.01 trimslice multi_v7_defconfig : passed 1:06.25 wandboard imx_v6_v7_defconfig : passed 1:09.12 wandboard multi_v7_defconfig : passed 1:05.23 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.329182] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338146] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347684] scsi0 : ahci_platform [ 1.351394] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360137] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365788] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373859] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.380067] mmc0: new high speed SDHC card at address aaaa [ 1.385960] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392237] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397783] hub 1-0:1.0: USB hub found [ 1.402021] hub 1-0:1.0: 1 port detected [ 1.406115] mmcblk0: p1 [ 1.410420] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.416110] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.424087] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435466] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442418] hub 2-0:1.0: USB hub found [ 1.446264] hub 2-0:1.0: 1 port detected [ 1.451254] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457954] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465795] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530314] hub 3-0:1.0: USB hub found [ 1.534166] hub 3-0:1.0: 1 port detected [ 1.539191] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545909] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553749] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615287] hub 4-0:1.0: USB hub found [ 1.619130] hub 4-0:1.0: 1 port detected [ 1.623786] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.711355] No MAC Management Counters available [ 1.716125] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722754] IP-Config: Failed to open eth0 [ 1.726873] IP-Config: No network devices available [ 1.731790] vcc3v0: disabling [ 1.734871] ALSA device list: [ 1.737849] No soundcards found. [ 1.741993] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.324177] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333146] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342706] scsi0 : ahci_platform [ 1.346424] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355161] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360811] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368866] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375075] mmc0: new high speed SDHC card at address aaaa [ 1.380957] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387235] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392804] hub 1-0:1.0: USB hub found [ 1.397037] hub 1-0:1.0: 1 port detected [ 1.401131] mmcblk0: p1 [ 1.405443] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411142] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419118] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430473] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437509] hub 2-0:1.0: USB hub found [ 1.441343] hub 2-0:1.0: 1 port detected [ 1.446357] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453045] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460886] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525343] hub 3-0:1.0: USB hub found [ 1.529184] hub 3-0:1.0: 1 port detected [ 1.534203] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.540924] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548763] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610289] hub 4-0:1.0: USB hub found [ 1.614126] hub 4-0:1.0: 1 port detected [ 1.618798] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.706351] No MAC Management Counters available [ 1.711128] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717746] IP-Config: Failed to open eth0 [ 1.721872] IP-Config: No network devices available [ 1.726792] vcc3v0: disabling [ 1.729871] ALSA device list: [ 1.732849] No soundcards found. [ 1.737000] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.994030] mmc0: new high speed SDHC card at address aaaa [ 0.999953] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005957] mmcblk0: p1 [ 1.016235] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023718] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029633] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038604] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047497] scsi0 : ahci_platform [ 1.051144] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059419] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.065016] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072884] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096162] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103128] hub 1-0:1.0: USB hub found [ 1.106963] hub 1-0:1.0: 1 port detected [ 1.111427] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117068] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124910] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146151] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.153032] hub 2-0:1.0: USB hub found [ 1.156862] hub 2-0:1.0: 1 port detected [ 1.161299] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167978] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175817] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240964] hub 3-0:1.0: USB hub found [ 1.244758] hub 3-0:1.0: 1 port detected [ 1.249272] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255907] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263778] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.331006] hub 4-0:1.0: USB hub found [ 1.334794] hub 4-0:1.0: 1 port detected [ 1.339170] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.426178] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442468] No MAC Management Counters available [ 1.447237] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453835] IP-Config: Failed to open eth0 [ 1.457958] IP-Config: No network devices available [ 1.462857] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.092612] NET: Registered protocol family 17 [ 47.092638] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.102179] mmcblk0: unknown partition table [ 47.102959] mmcblk0boot1: unknown partition table [ 47.103717] mmcblk0boot0: unknown partition table [ 47.118006] can: controller area network core (rev 20120528 abi 9) [ 47.124504] NET: Registered protocol family 29 [ 47.129156] can: raw protocol (rev 20120528) [ 47.133623] can: broadcast manager protocol (rev 20120528 t) [ 47.139548] can: netlink gateway (rev 20130117) max_hops=1 [ 47.145559] Key type dns_resolver registered [ 47.150092] omap_vc_init_channel: No PMIC info for vdd_core [ 47.155915] omap_vp_init: No PMIC info for vdd_core [ 47.161014] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.166651] omap_vp_init: No PMIC info for vdd_mm [ 47.171555] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.177289] omap_vp_init: No PMIC info for vdd_mpu [ 47.182582] ThumbEE CPU extension supported. [ 47.187055] Registering SWP/SWPB emulation handler [ 47.193253] palmas 0-0048: Irq flag is 0x00000000 [ 47.200980] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.208572] smps123: 600 <--> 1500 mV at 1060 mV [ 47.214734] smps45: 600 <--> 1310 mV at 1030 mV [ 47.221185] smps6: 1200 mV [ 47.225183] smps7: 1800 mV [ 47.229314] smps8: 600 <--> 1310 mV at 1040 mV [ 47.235041] smps9: failed to get the current voltage [ 47.240286] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.252345] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.376815] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.521823] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.527895] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.535333] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.542193] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.549913] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.563370] ALSA device list: [ 47.566465] No soundcards found. [ 47.570466] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.537646] NET: Registered protocol family 17 [ 47.537674] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.547254] mmcblk0: unknown partition table [ 47.548027] mmcblk0boot1: unknown partition table [ 47.548797] mmcblk0boot0: unknown partition table [ 47.563029] can: controller area network core (rev 20120528 abi 9) [ 47.569528] NET: Registered protocol family 29 [ 47.574174] can: raw protocol (rev 20120528) [ 47.578643] can: broadcast manager protocol (rev 20120528 t) [ 47.584562] can: netlink gateway (rev 20130117) max_hops=1 [ 47.590573] Key type dns_resolver registered [ 47.595110] omap_vc_init_channel: No PMIC info for vdd_core [ 47.600932] omap_vp_init: No PMIC info for vdd_core [ 47.606026] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.611675] omap_vp_init: No PMIC info for vdd_mm [ 47.616583] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.622314] omap_vp_init: No PMIC info for vdd_mpu [ 47.627590] ThumbEE CPU extension supported. [ 47.632060] Registering SWP/SWPB emulation handler [ 47.638271] palmas 0-0048: Irq flag is 0x00000000 [ 47.645977] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.653547] smps123: 600 <--> 1500 mV at 1060 mV [ 47.659680] smps45: 600 <--> 1310 mV at 1030 mV [ 47.666131] smps6: 1200 mV [ 47.670129] smps7: 1800 mV [ 47.674257] smps8: 600 <--> 1310 mV at 1040 mV [ 47.679983] smps9: failed to get the current voltage [ 47.685231] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.697273] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.821886] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.966896] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.972983] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.980411] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.987262] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.994975] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.008405] ALSA device list: [ 48.011501] No soundcards found. [ 48.015502] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.057364] usbcore: registered new interface driver usbhid [ 2.063186] usbhid: USB HID core driver [ 2.068545] oprofile: using timer interrupt. [ 2.073305] TCP: cubic registered [ 2.076806] Initializing XFRM netlink socket [ 2.081313] NET: Registered protocol family 17 [ 2.085992] NET: Registered protocol family 15 [ 2.090812] Key type dns_resolver registered [ 2.095383] omap_vc_init_channel: No PMIC info for vdd_core [ 2.101216] omap_vp_init: No PMIC info for vdd_core [ 2.106312] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.111963] omap_vp_init: No PMIC info for vdd_mm [ 2.116985] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.122716] omap_vp_init: No PMIC info for vdd_mpu [ 2.128274] ThumbEE CPU extension supported. [ 2.132753] Registering SWP/SWPB emulation handler [ 2.137771] SmartReflex Class3 initialized [ 2.147130] palmas 0-0048: Irq flag is 0x00000000 [ 2.157692] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.210048] smps123: 600 <--> 1500 mV at 1060 mV [ 2.217001] smps45: 600 <--> 1310 mV at 1030 mV [ 2.224270] smps6: 1200 mV [ 2.228897] smps7: 1800 mV [ 2.233693] smps8: 600 <--> 1310 mV at 1040 mV [ 2.240123] smps9: failed to get the current voltage [ 2.246041] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.260422] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.269258] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.277194] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.283249] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.292370] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.301735] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.308698] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.317202] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.325834] sr_init: No PMIC hook to init smartreflex [ 2.331359] sr_init: platform driver register failed for SR [ 2.359491] pbias_mmc_omap5: disabling [ 2.364999] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2568 pages used for memmap [ 0.000000] HighMem zone: 328704 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @ea79a000 s8448 r8192 d16128 u32768 [ 0.000000] pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521744 [ 0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998952K/2093056K available (6463K kernel code, 894K rwdata, 2572K rodata, 664K init, 303K bss, 94104K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0adb208 (9037 kB) [ 0.000000] .init : 0xc0adc000 - 0xc0b82100 ( 665 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c63840 ( 895 kB) [ 0.000000] .bss : 0xc0c63848 - 0xc0caf718 ( 304 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.571074] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.571607] Console: colour dummy device 80x30 [ 2889.571618] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.571626] pid_max: default: 32768 minimum: 301 [ 2889.571686] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.571692] Mountpoint-cache hash table entries: 2048 (order: 1, 81~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000000] .init : 0xc0ad5000 - 0xc0b79100 ( 657 kB) [ 0.000000] .data : 0xc0b7a000 - 0xc0c58dc0 ( 892 kB) [ 0.000000] .bss : 0xc0c58dc8 - 0xc0ca3e18 ( 301 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.667716] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.668263] Console: colour dummy device 80x30 [ 2889.668274] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.668281] pid_max: default: 32768 minimum: 301 [ 2889.668343] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.668350] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.668617] CPU: Testing write buffer coherency: ok [ 2889.668726] CPU0: update cpu_power 1024 [ 2889.668732] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.668828] Setting up static identity map for 0x40817448 - 0x408174e0 [ 2889.669953] CPU1: Booted secondary processor [ 2889.669985] CPU1: update cpu_power 1024 [ 2889.669988] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.670033] Brought up 2 CPUs [ 2889.670041] SMP: Total of 2 processors activated. [ 2889.670045] CPU: All CPU(s) started in HYP mode. [ 2889.670048] CPU: Virtualization extensions available. [ 2889.670289] devtmpfs: initialized [ 2889.672186] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.672379] pinctrl core: initialized pinctrl subsystem [ 2889.672584] regulator-dummy: no parameters [ 2889.678489] NET: Registered protocol family 16 [ 2889.679357] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.680062] cpuidle: using governor ladder [ 2889.680071] cpuidle: using governor menu [ 2889.685131] exynos-audss-clk 38100~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627227] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635162] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647064] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654388] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665863] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674377] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686309] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693634] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705108] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712921] HS USB OTG: no transceiver configured [ 3.717620] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725463] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733398] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745300] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752624] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764099] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772674] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784576] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791900] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803375] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811218] HS USB OTG: no transceiver configured [ 3.815917] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823760] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831665] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843597] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850921] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862396] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870910] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882843] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890136] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901641] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909423] HS USB OTG: no transceiver configured [ 3.914154] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.921997] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.929931] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941833] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949157] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960632] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline boot: 32 passed 9 failed (mainline/v3.15-8341-gd1e1cda)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.14 cubie2 multi_v7_defconfig : FAILED 1:35.74 cubie2 multi_lpae_defconfig : FAILED 1:22.43 omap5uevm omap2plus_defconfig : FAILED 1:42.90 omap5uevm multi_v7_defconfig : FAILED 1:45.12 omap5uevm multi_lpae_defconfig : FAILED 1:43.08 snow multi_v7_defconfig : FAILED 1:13.23 snow multi_lpae_defconfig : FAILED 1:13.75 snowball u8500_defconfig : FAILED 1:45.62 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.18 arndale exynos_defconfig : passed 1:20.54 arndale multi_v7_defconfig : passed 1:36.78 arndale multi_lpae_defconfig : passed 1:27.10 bbb omap2plus_defconfig : passed 1:29.34 bbb multi_v7_defconfig : passed 1:19.88 beaver tegra_defconfig : passed 0:59.61 beaver multi_v7_defconfig : passed 1:08.69 capri bcm_defconfig : passed 0:38.74 capri multi_v7_defconfig : passed 0:41.32 cubie sunxi_defconfig : passed 1:21.32 cubie multi_v7_defconfig : passed 1:26.01 cubox multi_v7_defconfig : passed 1:11.60 dalmore tegra_defconfig : warnings 1:19.50 dalmore multi_v7_defconfig : passed 1:21.59 dalmore multi_lpae_defconfig : passed 1:30.33 hummingboard imx_v6_v7_defconfig : passed 1:18.18 hummingboard multi_v7_defconfig : passed 1:07.44 jetson tegra_defconfig : passed 1:05.53 jetson multi_v7_defconfig : passed 0:55.70 jetson multi_lpae_defconfig : passed 0:58.89 panda omap2plus_defconfig : warnings 1:35.76 panda multi_v7_defconfig : warnings 1:54.04 sama5 sama5_defconfig : passed 1:51.05 seaboard tegra_defconfig : passed 1:07.70 seaboard multi_v7_defconfig : passed 1:07.76 snow exynos_defconfig : passed 1:30.31 snowball multi_v7_defconfig : passed 3:45.82 trimslice tegra_defconfig : passed 1:03.65 trimslice multi_v7_defconfig : passed 1:16.51 wandboard imx_v6_v7_defconfig : passed 1:07.81 wandboard multi_v7_defconfig : passed 1:27.01 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.329152] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338118] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347668] scsi0 : ahci_platform [ 1.351380] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360114] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365761] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373831] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.380040] mmc0: new high speed SDHC card at address aaaa [ 1.385928] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392210] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397773] hub 1-0:1.0: USB hub found [ 1.402013] hub 1-0:1.0: 1 port detected [ 1.406108] mmcblk0: p1 [ 1.410395] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.416081] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.424060] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435437] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442406] hub 2-0:1.0: USB hub found [ 1.446255] hub 2-0:1.0: 1 port detected [ 1.451263] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457959] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465800] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530282] hub 3-0:1.0: USB hub found [ 1.534134] hub 3-0:1.0: 1 port detected [ 1.539137] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545851] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553689] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615257] hub 4-0:1.0: USB hub found [ 1.619094] hub 4-0:1.0: 1 port detected [ 1.623757] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.711323] No MAC Management Counters available [ 1.716097] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722724] IP-Config: Failed to open eth0 [ 1.726844] IP-Config: No network devices available [ 1.731763] vcc3v0: disabling [ 1.734846] ALSA device list: [ 1.737826] No soundcards found. [ 1.741967] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.324183] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333150] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342699] scsi0 : ahci_platform [ 1.346422] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355158] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360807] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368864] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375068] mmc0: new high speed SDHC card at address aaaa [ 1.380940] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387219] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392764] hub 1-0:1.0: USB hub found [ 1.397011] hub 1-0:1.0: 1 port detected [ 1.401100] mmcblk0: p1 [ 1.405405] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411092] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419078] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430444] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437474] hub 2-0:1.0: USB hub found [ 1.441313] hub 2-0:1.0: 1 port detected [ 1.446330] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453018] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460861] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525291] hub 3-0:1.0: USB hub found [ 1.529136] hub 3-0:1.0: 1 port detected [ 1.534164] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.540886] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548726] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610268] hub 4-0:1.0: USB hub found [ 1.614108] hub 4-0:1.0: 1 port detected [ 1.618785] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.706321] No MAC Management Counters available [ 1.711090] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717715] IP-Config: Failed to open eth0 [ 1.721843] IP-Config: No network devices available [ 1.726761] vcc3v0: disabling [ 1.729843] ALSA device list: [ 1.732823] No soundcards found. [ 1.736976] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.993946] mmc0: new high speed SDHC card at address aaaa [ 0.999874] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005881] mmcblk0: p1 [ 1.016145] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023626] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029536] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038510] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047401] scsi0 : ahci_platform [ 1.051059] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059333] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064928] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072801] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096069] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103022] hub 1-0:1.0: USB hub found [ 1.106861] hub 1-0:1.0: 1 port detected [ 1.111333] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.116971] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124813] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146060] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152970] hub 2-0:1.0: USB hub found [ 1.156799] hub 2-0:1.0: 1 port detected [ 1.161240] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167920] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175764] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240876] hub 3-0:1.0: USB hub found [ 1.244673] hub 3-0:1.0: 1 port detected [ 1.249185] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255823] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263701] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330900] hub 4-0:1.0: USB hub found [ 1.334687] hub 4-0:1.0: 1 port detected [ 1.339056] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.426085] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442384] No MAC Management Counters available [ 1.447149] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453741] IP-Config: Failed to open eth0 [ 1.457867] IP-Config: No network devices available [ 1.462767] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071639] can: raw protocol (rev 20120528) [ 47.071646] can: broadcast manager protocol (rev 20120528 t) [ 47.071658] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071966] Key type dns_resolver registered [ 47.072046] omap_vc_init_channel: No PMIC info for vdd_core [ 47.072049] omap_vp_init: No PMIC info for vdd_core [ 47.072053] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072055] omap_vp_init: No PMIC info for vdd_mm [ 47.072059] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072060] omap_vp_init: No PMIC info for vdd_mpu [ 47.072370] ThumbEE CPU extension supported. [ 47.072384] Registering SWP/SWPB emulation handler [ 47.077519] palmas 0-0048: Irq flag is 0x00000000 [ 47.155322] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.161957] mmc0: new high speed MMC card at address 0001 [ 47.167895] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.172717] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.178999] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.185469] smps123: 600 <--> 1500 mV at 1060 mV [ 47.190756] mmcblk0: unknown partition table [ 47.196101] mmcblk0boot1: unknown partition table [ 47.201144] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206420] mmcblk0boot0: unknown partition table [ 47.212580] smps6: 1200 mV [ 47.216611] smps7: 1800 mV [ 47.220706] smps8: 600 <--> 1310 mV at 1040 mV [ 47.226436] smps9: failed to get the current voltage [ 47.231686] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.243728] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371817] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516824] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.522907] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530352] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537211] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.544936] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558403] ALSA device list: [ 47.561496] No soundcards found. [ 47.565493] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.516779] can: raw protocol (rev 20120528) [ 47.516786] can: broadcast manager protocol (rev 20120528 t) [ 47.516798] can: netlink gateway (rev 20130117) max_hops=1 [ 47.517105] Key type dns_resolver registered [ 47.517186] omap_vc_init_channel: No PMIC info for vdd_core [ 47.517189] omap_vp_init: No PMIC info for vdd_core [ 47.517192] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.517194] omap_vp_init: No PMIC info for vdd_mm [ 47.517198] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.517199] omap_vp_init: No PMIC info for vdd_mpu [ 47.517509] ThumbEE CPU extension supported. [ 47.517523] Registering SWP/SWPB emulation handler [ 47.522674] palmas 0-0048: Irq flag is 0x00000000 [ 47.600480] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.601285] mmc0: new high speed MMC card at address 0001 [ 47.601539] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.601777] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.606770] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.607353] mmcblk0: unknown partition table [ 47.608131] mmcblk0boot1: unknown partition table [ 47.608885] mmcblk0boot0: unknown partition table [ 47.645327] smps123: 600 <--> 1500 mV at 1060 mV [ 47.651452] smps45: 600 <--> 1310 mV at 1030 mV [ 47.657886] smps6: 1200 mV [ 47.661852] smps7: 1800 mV [ 47.665957] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671699] smps9: failed to get the current voltage [ 47.676951] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.689003] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816949] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961958] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.968046] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975475] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982340] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.990060] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003479] ALSA device list: [ 48.006577] No soundcards found. [ 48.010573] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.028480] Key type dns_resolver registered [ 2.028577] omap_vc_init_channel: No PMIC info for vdd_core [ 2.028581] omap_vp_init: No PMIC info for vdd_core [ 2.028591] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.028594] omap_vp_init: No PMIC info for vdd_mm [ 2.028603] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.028606] omap_vp_init: No PMIC info for vdd_mpu [ 2.029170] ThumbEE CPU extension supported. [ 2.029193] Registering SWP/SWPB emulation handler [ 2.029203] SmartReflex Class3 initialized [ 2.051116] palmas 0-0048: Irq flag is 0x00000000 [ 2.111027] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.111388] mmc0: new high speed MMC card at address 0001 [ 2.117392] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.117663] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.117867] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.120655] mmcblk0: unknown partition table [ 2.122722] mmcblk0boot1: unknown partition table [ 2.124675] mmcblk0boot0: unknown partition table [ 2.201009] smps123: 600 <--> 1500 mV at 1060 mV [ 2.208148] smps45: 600 <--> 1310 mV at 1030 mV [ 2.215555] smps6: 1200 mV [ 2.220263] smps7: 1800 mV [ 2.225208] smps8: 600 <--> 1310 mV at 1040 mV [ 2.231578] smps9: failed to get the current voltage [ 2.237519] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.251847] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.260669] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.268551] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.274654] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.283798] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.293198] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.300186] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.308761] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.317437] sr_init: No PMIC hook to init smartreflex [ 2.322902] sr_init: platform driver register failed for SR [ 2.351196] pbias_mmc_omap5: disabling [ 2.356688] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0adb208 (9037 kB) [ 0.000000] .init : 0xc0adc000 - 0xc0b82100 ( 665 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c63840 ( 895 kB) [ 0.000000] .bss : 0xc0c63848 - 0xc0caf718 ( 304 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.643141] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.643678] Console: colour dummy device 80x30 [ 2889.643690] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.643698] pid_max: default: 32768 minimum: 301 [ 2889.643760] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.643765] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.644037] CPU: Testing write buffer coherency: ok [ 2889.644147] CPU0: update cpu_power 1024 [ 2889.644153] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.644246] Setting up static identity map for 0x4081e4c0 - 0x4081e558 [ 2889.645335] CPU1: Booted secondary processor [ 2889.645371] CPU1: update cpu_power 1024 [ 2889.645375] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.645420] Brought up 2 CPUs [ 2889.645428] SMP: Total of 2 processors activated. [ 2889.645432] CPU: All CPU(s) started in HYP mode. [ 2889.645436] CPU: Virtualization extensions available. [ 2889.645677] devtmpfs: initialized [ 2889.647558] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.647744] pinctrl core: initialized pinctrl subsystem [ 2889.647940] regulator-dummy: no parameters [ 2889.653839] NET: Registered pro~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0ad4134 (9009 kB) [ 0.000000] .init : 0xc0ad5000 - 0xc0b79100 ( 657 kB) [ 0.000000] .data : 0xc0b7a000 - 0xc0c58dc0 ( 892 kB) [ 0.000000] .bss : 0xc0c58dc8 - 0xc0ca3e18 ( 301 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.683331] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.683879] Console: colour dummy device 80x30 [ 2889.683891] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.683898] pid_max: default: 32768 minimum: 301 [ 2889.683960] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.683966] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.684234] CPU: Testing write buffer coherency: ok [ 2889.684345] CPU0: update cpu_power 1024 [ 2889.684351] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.684447] Setting up static identity map for 0x40817448 - 0x408174e0 [ 2889.685564] CPU1: Booted secondary processor [ 2889.685596] CPU1: update cpu_power 1024 [ 2889.685599] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.685642] Brought up 2 CPUs [ 2889.685651] SMP: Total of 2 processors activated. [ 2889.685654] CPU: All CPU(s) started in HYP mode. [ 2889.685658] CPU: Virtualization extensions available. [ 2889.685900] devtmpfs: initialized [ 2889.687799] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.687992] pinctrl core: initialized pinctrl subsystem [ 2889.688192] regulator-dummy: no parameters [ 2889.694070] NET: Registered protocol family 16~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627227] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635162] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647094] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654388] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665893] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674377] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686309] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693634] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705108] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712921] HS USB OTG: no transceiver configured [ 3.717620] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725494] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733398] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745330] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752655] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764129] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772644] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784545] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791870] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803344] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811157] HS USB OTG: no transceiver configured [ 3.815856] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823730] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831634] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843566] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850860] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862365] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870880] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882812] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890106] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901580] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909393] HS USB OTG: no transceiver configured [ 3.914123] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.921966] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.929870] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941802] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949096] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960571] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline boot: 32 passed 8 failed (mainline/v3.15-8260-g0788823)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:24.35 cubie2 multi_v7_defconfig : FAILED 1:37.04 cubie2 multi_lpae_defconfig : FAILED 1:23.45 omap5uevm omap2plus_defconfig : FAILED 1:46.14 omap5uevm multi_v7_defconfig : FAILED 1:43.34 omap5uevm multi_lpae_defconfig : FAILED 1:48.15 snow multi_v7_defconfig : FAILED 1:13.14 snowball u8500_defconfig : FAILED 1:41.52 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:18.59 arndale exynos_defconfig : passed 1:19.29 arndale multi_v7_defconfig : passed 1:31.47 arndale multi_lpae_defconfig : passed 1:24.72 bbb omap2plus_defconfig : passed 1:32.38 bbb multi_v7_defconfig : passed 1:25.60 beaver tegra_defconfig : passed 1:08.85 beaver multi_v7_defconfig : passed 1:03.03 capri bcm_defconfig : passed 0:41.54 capri multi_v7_defconfig : passed 0:39.95 cubie sunxi_defconfig : passed 1:11.24 cubie multi_v7_defconfig : passed 1:24.51 cubox multi_v7_defconfig : passed 1:13.89 dalmore tegra_defconfig : passed 1:32.66 dalmore multi_v7_defconfig : passed 1:22.95 dalmore multi_lpae_defconfig : passed 1:23.17 hummingboard imx_v6_v7_defconfig : passed 1:24.80 hummingboard multi_v7_defconfig : passed 1:19.15 jetson multi_v7_defconfig : passed 0:56.56 jetson multi_lpae_defconfig : passed 0:55.60 panda omap2plus_defconfig : warnings 1:36.58 panda multi_v7_defconfig : warnings 1:54.25 sama5 sama5_defconfig : passed 1:59.80 seaboard tegra_defconfig : passed 1:12.79 seaboard multi_v7_defconfig : passed 1:13.52 snow exynos_defconfig : passed 1:21.41 snow multi_lpae_defconfig : passed 1:24.14 snowball multi_v7_defconfig : passed 3:50.45 trimslice tegra_defconfig : passed 1:15.15 trimslice multi_v7_defconfig : passed 1:01.67 wandboard imx_v6_v7_defconfig : passed 1:04.33 wandboard multi_v7_defconfig : passed 1:18.38 Offline boards: jetson tegra_defconfig : OFFLINE 1:43.31 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.329287] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338254] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347814] scsi0 : ahci_platform [ 1.351529] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360276] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365925] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373994] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.380201] mmc0: new high speed SDHC card at address aaaa [ 1.386094] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392371] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397929] hub 1-0:1.0: USB hub found [ 1.402181] hub 1-0:1.0: 1 port detected [ 1.406276] mmcblk0: p1 [ 1.410659] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.416288] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.424264] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435538] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442513] hub 2-0:1.0: USB hub found [ 1.446369] hub 2-0:1.0: 1 port detected [ 1.451376] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.458073] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465918] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530383] hub 3-0:1.0: USB hub found [ 1.534239] hub 3-0:1.0: 1 port detected [ 1.539250] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545971] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553811] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615364] hub 4-0:1.0: USB hub found [ 1.619200] hub 4-0:1.0: 1 port detected [ 1.623871] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.711426] No MAC Management Counters available [ 1.716197] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722821] IP-Config: Failed to open eth0 [ 1.726943] IP-Config: No network devices available [ 1.731861] vcc3v0: disabling [ 1.734942] ALSA device list: [ 1.737922] No soundcards found. [ 1.742061] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.324554] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333522] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.343077] scsi0 : ahci_platform [ 1.346808] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355542] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.361192] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.369245] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375446] mmc0: new high speed SDHC card at address aaaa [ 1.381326] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387600] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.393165] hub 1-0:1.0: USB hub found [ 1.397418] hub 1-0:1.0: 1 port detected [ 1.401513] mmcblk0: p1 [ 1.405893] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411522] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419495] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430806] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437821] hub 2-0:1.0: USB hub found [ 1.441657] hub 2-0:1.0: 1 port detected [ 1.446670] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453359] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.461199] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525675] hub 3-0:1.0: USB hub found [ 1.529523] hub 3-0:1.0: 1 port detected [ 1.534554] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.541280] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.549121] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610629] hub 4-0:1.0: USB hub found [ 1.614470] hub 4-0:1.0: 1 port detected [ 1.619152] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.706681] No MAC Management Counters available [ 1.711454] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.718069] IP-Config: Failed to open eth0 [ 1.722193] IP-Config: No network devices available [ 1.727111] vcc3v0: disabling [ 1.730191] ALSA device list: [ 1.733175] No soundcards found. [ 1.737332] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.993953] mmc0: new high speed SDHC card at address aaaa [ 0.999877] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005887] mmcblk0: p1 [ 1.016147] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023631] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029540] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038514] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047407] scsi0 : ahci_platform [ 1.051054] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059328] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064931] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072805] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096072] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103053] hub 1-0:1.0: USB hub found [ 1.106891] hub 1-0:1.0: 1 port detected [ 1.111365] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117005] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124845] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146062] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152960] hub 2-0:1.0: USB hub found [ 1.156789] hub 2-0:1.0: 1 port detected [ 1.161243] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167918] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175758] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240886] hub 3-0:1.0: USB hub found [ 1.244685] hub 3-0:1.0: 1 port detected [ 1.249198] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255833] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263708] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330909] hub 4-0:1.0: USB hub found [ 1.334695] hub 4-0:1.0: 1 port detected [ 1.339066] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.426090] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442396] No MAC Management Counters available [ 1.447160] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453754] IP-Config: Failed to open eth0 [ 1.457876] IP-Config: No network devices available [ 1.462773] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071654] can: raw protocol (rev 20120528) [ 47.071661] can: broadcast manager protocol (rev 20120528 t) [ 47.071672] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071990] Key type dns_resolver registered [ 47.072071] omap_vc_init_channel: No PMIC info for vdd_core [ 47.072074] omap_vp_init: No PMIC info for vdd_core [ 47.072077] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072079] omap_vp_init: No PMIC info for vdd_mm [ 47.072082] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072084] omap_vp_init: No PMIC info for vdd_mpu [ 47.072396] ThumbEE CPU extension supported. [ 47.072411] Registering SWP/SWPB emulation handler [ 47.077498] palmas 0-0048: Irq flag is 0x00000000 [ 47.155338] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.161954] mmc0: new high speed MMC card at address 0001 [ 47.167878] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.172711] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.178988] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.185477] smps123: 600 <--> 1500 mV at 1060 mV [ 47.190779] mmcblk0: unknown partition table [ 47.196128] mmcblk0boot1: unknown partition table [ 47.201158] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206418] mmcblk0boot0: unknown partition table [ 47.212580] smps6: 1200 mV [ 47.216597] smps7: 1800 mV [ 47.220707] smps8: 600 <--> 1310 mV at 1040 mV [ 47.226434] smps9: failed to get the current voltage [ 47.231679] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.243727] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371796] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516804] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.522888] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530336] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537190] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.544908] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558278] ALSA device list: [ 47.561373] No soundcards found. [ 47.565368] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.516690] can: raw protocol (rev 20120528) [ 47.516698] can: broadcast manager protocol (rev 20120528 t) [ 47.516710] can: netlink gateway (rev 20130117) max_hops=1 [ 47.517013] Key type dns_resolver registered [ 47.517098] omap_vc_init_channel: No PMIC info for vdd_core [ 47.517100] omap_vp_init: No PMIC info for vdd_core [ 47.517104] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.517106] omap_vp_init: No PMIC info for vdd_mm [ 47.517109] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.517111] omap_vp_init: No PMIC info for vdd_mpu [ 47.517416] ThumbEE CPU extension supported. [ 47.517430] Registering SWP/SWPB emulation handler [ 47.522569] palmas 0-0048: Irq flag is 0x00000000 [ 47.600371] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.606989] mmc0: new high speed MMC card at address 0001 [ 47.612931] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.617745] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.624020] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.630664] smps123: 600 <--> 1500 mV at 1060 mV [ 47.635616] mmcblk0: unknown partition table [ 47.641087] mmcblk0boot1: unknown partition table [ 47.646349] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651613] mmcblk0boot0: unknown partition table [ 47.657793] smps6: 1200 mV [ 47.661761] smps7: 1800 mV [ 47.665875] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671604] smps9: failed to get the current voltage [ 47.676845] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.688881] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816846] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961857] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.967945] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975378] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982231] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.989945] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003394] ALSA device list: [ 48.006492] No soundcards found. [ 48.010485] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.040986] Key type dns_resolver registered [ 2.041097] omap_vc_init_channel: No PMIC info for vdd_core [ 2.041101] omap_vp_init: No PMIC info for vdd_core [ 2.041111] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.041114] omap_vp_init: No PMIC info for vdd_mm [ 2.041123] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.041126] omap_vp_init: No PMIC info for vdd_mpu [ 2.041676] ThumbEE CPU extension supported. [ 2.041699] Registering SWP/SWPB emulation handler [ 2.041708] SmartReflex Class3 initialized [ 2.063606] palmas 0-0048: Irq flag is 0x00000000 [ 2.123403] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.123942] mmc0: new high speed MMC card at address 0001 [ 2.129884] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.130134] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.130330] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.133173] mmcblk0: unknown partition table [ 2.135132] mmcblk0boot1: unknown partition table [ 2.137063] mmcblk0boot0: unknown partition table [ 2.213551] smps123: 600 <--> 1500 mV at 1060 mV [ 2.220636] smps45: 600 <--> 1310 mV at 1030 mV [ 2.227982] smps6: 1200 mV [ 2.232712] smps7: 1800 mV [ 2.237603] smps8: 600 <--> 1310 mV at 1040 mV [ 2.244098] smps9: failed to get the current voltage [ 2.250038] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.264376] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.273203] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.281162] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.287259] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.296381] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.305772] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.312747] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.321335] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.330019] sr_init: No PMIC hook to init smartreflex [ 2.335485] sr_init: platform driver register failed for SR [ 2.363555] pbias_mmc_omap5: disabling [ 2.369026] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000007] Switching to timer-based delay loop [ 2889.715601] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.716147] Console: colour dummy device 80x30 [ 2889.716159] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.716167] pid_max: default: 32768 minimum: 301 [ 2889.716226] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.716232] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.716500] CPU: Testing write buffer coherency: ok [ 2889.716610] CPU0: update cpu_power 1024 [ 2889.716616] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.716713] Setting up static identity map for 0x40817070 - 0x40817108 [ 2889.717833] CPU1: Booted secondary processor [ 2889.717864] CPU1: update cpu_power 1024 [ 2889.717867] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.717911] Brought up 2 CPUs [ 2889.717919] SMP: Total of 2 processors activated. [ 2889.717923] CPU: All CPU(s) started in HYP mode. [ 2889.717926] CPU: Virtualization extensions available. [ 2889.718170] devtmpfs: initialized [ 2889.720061] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.720255] pinctrl core: initialized pinctrl subsystem [ 2889.720453] regulator-dummy: no parameters [ 2889.726314] NET: Registered protocol family 16 [ 2889.727178] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.727885] cpuidle: using governor ladder [ 2889.727893] cpuidle: using governor menu [ 2889.732922] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.736756] No ATAGs? [ 2889.736774] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.736779] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.736878] EXYNOS5250 PMU Initialize [ 2889.738070] Serial: AMBA PL011 UART driver [ 2920.594301] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594314] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594605] vbat-supply: no parameters [ 2920.594743] P5.0V_USB3CON: 5000 mV [~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.538452] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550384] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.557708] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569183] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.577758] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.589691] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.596984] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608489] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616302] HS USB OTG: no transceiver configured [ 3.621002] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.628845] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.636779] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.648681] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656005] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667480] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676055] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.687988] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695312] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.706787] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714599] HS USB OTG: no transceiver configured [ 3.719299] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727142] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735076] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747009] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754333] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.765808] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774383] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786315] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.793609] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805084] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.812927] HS USB OTG: no transceiver configured [ 3.817626] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825469] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833404] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845336] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852661] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864135] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.872711] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

next build: 283 warnings 0 failures (next/next-20140611)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 16b0e65 Add linux-next specific files for 20140611 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140611/ Runtime: 42m 4s Passed: 126 Failed: 0 Warnings: 283 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 include/linux/of.h:772:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 14 include/linux/bitops.h:40) [-Wdeprecated-declarations] 22 include/linux/ftrace.h:623:60: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4ae8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x3640): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x257c8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3df30): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x75c0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x86070): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3deac): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x757c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85aec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x727c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x36c8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d93c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports