Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

mainline build: 45 warnings 0 failures (mainline/v3.15-8556-gdfb9454)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: dfb9454 Merge git://www.linux-watchdog.org/linux-watchdog Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-8556-gdfb9454/ Runtime: 45m 56s Passed: 126 Failed: 0 Warnings: 45 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline build: 45 warnings 0 failures (mainline/v3.15-8369-g2937f5e)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 2937f5e Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-8369-g2937f5e/ Runtime: 45m 43s Passed: 126 Failed: 0 Warnings: 45 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline build: 45 warnings 0 failures (mainline/v3.15-8351-g9ee4d7a)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 9ee4d7a Merge branch 'akpm' (patches from Andrew Morton) Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-8351-g9ee4d7a/ Runtime: 45m 31s Passed: 126 Failed: 0 Warnings: 45 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline build: 45 warnings 0 failures (mainline/v3.15-8341-gd1e1cda)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: d1e1cda Merge tag 'nfs-for-3.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-8341-gd1e1cda/ Runtime: 46m 2s Passed: 126 Failed: 0 Warnings: 45 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline build: 45 warnings 0 failures (mainline/v3.15-8260-g0788823)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 0788823 Merge tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-8260-g0788823/ Runtime: 46m 3s Passed: 126 Failed: 0 Warnings: 45 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 61 boots: 61 pass, 0 fail (v3.15-8163-g5b174fd)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-8163-g5b174fd Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.5 sec: PASS da850-evm 0 min 15.1 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS tegra30-beaver 0 min 17.6 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS omap5-uevm 1 min 43.2 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.5 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS armada-370-mirabox 0 min 21.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.3 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 48.0 sec: PASS legacy,3530beagle 0 min 23.6 sec: PASS (Warnings: 1) omap4-panda 0 min 54.0 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.5 sec: PASS am335x-bone 0 min 24.1 sec: PASS omap3-overo-storm-tobi 0 min 25.1 sec: PASS omap5-uevm 0 min 53.5 sec: PASS (Warnings: 1) omap3-n900 0 min 17.6 sec: PASS legacy,n900 0 min 17.4 sec: PASS (Warnings: 1) omap4-panda-es 0 min 55.0 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.3 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.3 sec: PASS am335x-boneblack 0 min 22.3 sec: PASS sun7i-a20-cubieboard2 0 min 12.8 sec: PASS sun4i-a10-cubieboard 0 min 17.3 sec: PASS exynos5410-smdk5410 0 min 28.7 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.8 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 47.6 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS ste-snowball 1 min 11.5 sec: PASS tegra30-beaver 0 min 20.2 sec: PASS omap3-n900 0 min 15.9 sec: PASS qcom-apq8074-dragonboard 0 min 19.4 sec: PASS bcm28155-ap 0 min 26.8 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS omap3-overo-storm-tobi 0 min 21.4 sec: PASS omap3-beagle-xm 0 min 49.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.8 sec: PASS omap5-uevm 1 min 45.0 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.4 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.0 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.6 sec: PASS sun4i-a10-cubieboard 0 min 11.8 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.2 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.9 sec: PASS arm-exynos_defconfig -------------------- exynos5250-arndale 0 min 29.7 sec: PASS exynos5410-smdk5410 0 min 27.3 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.9 sec: PASS imx6q-wandboard 0 min 14.2 sec: PASS arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.7 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.7 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.4 sec: PASS

11 years, 5 months

mainline boot: 31 passed 10 failed (mainline/v3.15-8163-g5b174fd)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:23.39 cubie2 multi_v7_defconfig : FAILED 1:41.36 cubie2 multi_lpae_defconfig : FAILED 1:24.76 cubox multi_v7_defconfig : FAILED 1:34.85 omap5uevm omap2plus_defconfig : FAILED 1:46.93 omap5uevm multi_v7_defconfig : FAILED 1:53.79 omap5uevm multi_lpae_defconfig : FAILED 1:42.96 snow multi_v7_defconfig : FAILED 1:13.03 snow multi_lpae_defconfig : FAILED 1:13.41 snowball u8500_defconfig : FAILED 1:58.60 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.29 arndale exynos_defconfig : passed 1:18.06 arndale multi_v7_defconfig : passed 1:46.59 arndale multi_lpae_defconfig : passed 1:20.74 bbb omap2plus_defconfig : passed 1:31.82 bbb multi_v7_defconfig : passed 1:25.23 beaver tegra_defconfig : passed 0:59.90 beaver multi_v7_defconfig : passed 1:08.72 capri bcm_defconfig : passed 0:39.48 capri multi_v7_defconfig : passed 0:40.64 cubie sunxi_defconfig : passed 1:22.76 cubie multi_v7_defconfig : passed 1:26.31 dalmore tegra_defconfig : passed 1:34.98 dalmore multi_v7_defconfig : passed 1:25.98 dalmore multi_lpae_defconfig : passed 1:24.12 hummingboard imx_v6_v7_defconfig : passed 1:28.04 hummingboard multi_v7_defconfig : passed 1:16.84 jetson tegra_defconfig : passed 0:58.01 jetson multi_v7_defconfig : passed 0:57.56 jetson multi_lpae_defconfig : passed 1:03.59 panda omap2plus_defconfig : warnings 1:31.23 panda multi_v7_defconfig : warnings 1:52.71 sama5 sama5_defconfig : passed 2:00.12 seaboard tegra_defconfig : passed 1:04.04 seaboard multi_v7_defconfig : passed 1:26.10 snow exynos_defconfig : passed 1:31.05 snowball multi_v7_defconfig : passed 3:23.77 trimslice tegra_defconfig : passed 1:03.03 trimslice multi_v7_defconfig : passed 1:12.42 wandboard imx_v6_v7_defconfig : passed 1:04.62 wandboard multi_v7_defconfig : passed 1:14.07 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.324357] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333327] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342887] scsi0 : ahci_platform [ 1.346604] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355341] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360986] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.369053] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375260] mmc0: new high speed SDHC card at address aaaa [ 1.381141] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387423] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392978] hub 1-0:1.0: USB hub found [ 1.397219] hub 1-0:1.0: 1 port detected [ 1.401316] mmcblk0: p1 [ 1.405690] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411315] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419289] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430632] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437601] hub 2-0:1.0: USB hub found [ 1.441457] hub 2-0:1.0: 1 port detected [ 1.446469] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453166] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.461010] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525497] hub 3-0:1.0: USB hub found [ 1.529349] hub 3-0:1.0: 1 port detected [ 1.534346] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.541058] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548917] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610459] hub 4-0:1.0: USB hub found [ 1.614300] hub 4-0:1.0: 1 port detected [ 1.618976] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:17 UTC (17) [ 1.706512] No MAC Management Counters available [ 1.711283] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717908] IP-Config: Failed to open eth0 [ 1.722027] IP-Config: No network devices available [ 1.726944] vcc3v0: disabling [ 1.730026] ALSA device list: [ 1.733007] No soundcards found. [ 1.737146] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.319526] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.328494] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.338062] scsi0 : ahci_platform [ 1.341782] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.350531] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.356180] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.364229] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.370423] mmc0: new high speed SDHC card at address aaaa [ 1.376293] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.382563] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.388132] hub 1-0:1.0: USB hub found [ 1.392363] hub 1-0:1.0: 1 port detected [ 1.396453] mmcblk0: p1 [ 1.400843] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.406471] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.414444] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.425790] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.432826] hub 2-0:1.0: USB hub found [ 1.436664] hub 2-0:1.0: 1 port detected [ 1.441666] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.448355] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.456199] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.520640] hub 3-0:1.0: USB hub found [ 1.524505] hub 3-0:1.0: 1 port detected [ 1.529534] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.536253] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.544092] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.605616] hub 4-0:1.0: USB hub found [ 1.609461] hub 4-0:1.0: 1 port detected [ 1.614142] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:18 UTC (18) [ 1.701664] No MAC Management Counters available [ 1.706433] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.713055] IP-Config: Failed to open eth0 [ 1.717177] IP-Config: No network devices available [ 1.722096] vcc3v0: disabling [ 1.725179] ALSA device list: [ 1.728161] No soundcards found. [ 1.732297] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.993975] mmc0: new high speed SDHC card at address aaaa [ 0.999898] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005902] mmcblk0: p1 [ 1.016147] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023629] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029539] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038510] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047408] scsi0 : ahci_platform [ 1.051045] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059316] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064916] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072785] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096068] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103037] hub 1-0:1.0: USB hub found [ 1.106877] hub 1-0:1.0: 1 port detected [ 1.111349] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.116995] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124835] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146059] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152961] hub 2-0:1.0: USB hub found [ 1.156787] hub 2-0:1.0: 1 port detected [ 1.161226] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167907] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175748] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240878] hub 3-0:1.0: USB hub found [ 1.244678] hub 3-0:1.0: 1 port detected [ 1.249194] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255825] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263700] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330923] hub 4-0:1.0: USB hub found [ 1.334713] hub 4-0:1.0: 1 port detected [ 1.339085] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.426089] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442392] No MAC Management Counters available [ 1.447162] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453763] IP-Config: Failed to open eth0 [ 1.457888] IP-Config: No network devices available [ 1.462787] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.240500] SPEAr-ehci: EHCI SPEAr driver [ 1.244606] tegra-ehci: Tegra EHCI driver [ 1.248731] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.254914] ohci-pci: OHCI PCI platform driver [ 1.259420] ohci-platform: OHCI generic platform driver [ 1.264740] ohci-omap3: OHCI OMAP3 driver [ 1.268844] SPEAr-ohci: OHCI SPEAr driver [ 1.273579] usbcore: registered new interface driver usb-storage [ 1.281089] mousedev: PS/2 mouse device common for all mice [ 1.288093] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297434] i2c /dev entries driver [ 1.303458] usbcore: registered new interface driver uvcvideo [ 1.309209] USB Video Class driver (1.1.1) [ 1.313311] gspca_main: v2.14.0 registered [ 1.320527] orion_wdt: Initial timeout 25 sec [ 1.326005] sdhci: Secure Digital Host Controller Interface driver [ 1.332174] sdhci: Copyright(c) Pierre Ossman [ 1.337236] Synopsys Designware Multimedia Card Interface Driver [ 1.343744] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.350151] usbcore: registered new interface driver usbhid [ 1.355711] usbhid: USB HID core driver [ 1.360686] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368639] TCP: cubic registered [ 1.371987] NET: Registered protocol family 17 [ 1.376447] can: controller area network core (rev 20120528 abi 9) [ 1.382686] NET: Registered protocol family 29 [ 1.387131] can: raw protocol (rev 20120528) [ 1.391396] can: broadcast manager protocol (rev 20120528 t) [ 1.397052] can: netlink gateway (rev 20130117) max_hops=1 [ 1.402944] Key type dns_resolver registered [ 1.407420] ThumbEE CPU extension supported. [ 1.411704] Registering SWP/SWPB emulation handler [ 1.416486] PJ4 iWMMXt v2 coprocessor enabled. [ 1.422101] USB Power: 5000 mV [ 1.425668] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-10 20:04:07 UTC (1402430647) [ 1.436186] ALSA device list: [ 1.439137] No soundcards found. [ 1.443062] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071679] can: raw protocol (rev 20120528) [ 47.071686] can: broadcast manager protocol (rev 20120528 t) [ 47.071698] can: netlink gateway (rev 20130117) max_hops=1 [ 47.072008] Key type dns_resolver registered [ 47.072090] omap_vc_init_channel: No PMIC info for vdd_core [ 47.072092] omap_vp_init: No PMIC info for vdd_core [ 47.072096] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072098] omap_vp_init: No PMIC info for vdd_mm [ 47.072102] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072103] omap_vp_init: No PMIC info for vdd_mpu [ 47.072411] ThumbEE CPU extension supported. [ 47.072427] Registering SWP/SWPB emulation handler [ 47.077636] palmas 0-0048: Irq flag is 0x00000000 [ 47.155357] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.162061] mmc0: new high speed MMC card at address 0001 [ 47.167999] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.172829] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.179109] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.185559] smps123: 600 <--> 1500 mV at 1060 mV [ 47.190840] mmcblk0: unknown partition table [ 47.196189] mmcblk0boot1: unknown partition table [ 47.201219] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206481] mmcblk0boot0: unknown partition table [ 47.212642] smps6: 1200 mV [ 47.216652] smps7: 1800 mV [ 47.220810] smps8: 600 <--> 1310 mV at 1040 mV [ 47.226547] smps9: failed to get the current voltage [ 47.231796] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.243834] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371923] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516931] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.523010] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530466] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537328] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.545051] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558393] ALSA device list: [ 47.561495] No soundcards found. [ 47.565493] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.537519] NET: Registered protocol family 17 [ 47.537546] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.547195] mmcblk0: unknown partition table [ 47.547971] mmcblk0boot1: unknown partition table [ 47.548718] mmcblk0boot0: unknown partition table [ 47.562892] can: controller area network core (rev 20120528 abi 9) [ 47.569386] NET: Registered protocol family 29 [ 47.574031] can: raw protocol (rev 20120528) [ 47.578498] can: broadcast manager protocol (rev 20120528 t) [ 47.584423] can: netlink gateway (rev 20130117) max_hops=1 [ 47.590449] Key type dns_resolver registered [ 47.594983] omap_vc_init_channel: No PMIC info for vdd_core [ 47.600808] omap_vp_init: No PMIC info for vdd_core [ 47.605904] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.611539] omap_vp_init: No PMIC info for vdd_mm [ 47.616453] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.622185] omap_vp_init: No PMIC info for vdd_mpu [ 47.627472] ThumbEE CPU extension supported. [ 47.631949] Registering SWP/SWPB emulation handler [ 47.638180] palmas 0-0048: Irq flag is 0x00000000 [ 47.645892] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.653485] smps123: 600 <--> 1500 mV at 1060 mV [ 47.659617] smps45: 600 <--> 1310 mV at 1030 mV [ 47.666038] smps6: 1200 mV [ 47.670035] smps7: 1800 mV [ 47.674164] smps8: 600 <--> 1310 mV at 1040 mV [ 47.679891] smps9: failed to get the current voltage [ 47.685142] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.697187] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.821834] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.966842] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.972929] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.980350] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.987197] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.994911] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.008358] ALSA device list: [ 48.011451] No soundcards found. [ 48.015443] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.080482] usbcore: registered new interface driver usbhid [ 2.086306] usbhid: USB HID core driver [ 2.091693] oprofile: using timer interrupt. [ 2.096440] TCP: cubic registered [ 2.100023] Initializing XFRM netlink socket [ 2.104536] NET: Registered protocol family 17 [ 2.109219] NET: Registered protocol family 15 [ 2.114045] Key type dns_resolver registered [ 2.118607] omap_vc_init_channel: No PMIC info for vdd_core [ 2.124454] omap_vp_init: No PMIC info for vdd_core [ 2.129567] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.135208] omap_vp_init: No PMIC info for vdd_mm [ 2.140136] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.145863] omap_vp_init: No PMIC info for vdd_mpu [ 2.151427] ThumbEE CPU extension supported. [ 2.155907] Registering SWP/SWPB emulation handler [ 2.160932] SmartReflex Class3 initialized [ 2.170361] palmas 0-0048: Irq flag is 0x00000000 [ 2.180890] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.233213] smps123: 600 <--> 1500 mV at 1060 mV [ 2.240179] smps45: 600 <--> 1310 mV at 1030 mV [ 2.247489] smps6: 1200 mV [ 2.252158] smps7: 1800 mV [ 2.257077] smps8: 600 <--> 1310 mV at 1040 mV [ 2.263485] smps9: failed to get the current voltage [ 2.269391] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.283762] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.292585] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.300517] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.306568] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.315688] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.325033] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.331976] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.340485] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.349119] sr_init: No PMIC hook to init smartreflex [ 2.354618] sr_init: platform driver register failed for SR [ 2.382502] pbias_mmc_omap5: disabling [ 2.388008] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.687074] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.687613] Console: colour dummy device 80x30 [ 2889.687625] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.687633] pid_max: default: 32768 minimum: 301 [ 2889.687692] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.687698] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.687969] CPU: Testing write buffer coherency: ok [ 2889.688081] CPU0: update cpu_power 1024 [ 2889.688087] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.688182] Setting up static identity map for 0x4081e380 - 0x4081e418 [ 2889.689280] CPU1: Booted secondary processor [ 2889.689316] CPU1: update cpu_power 1024 [ 2889.689319] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.689365] Brought up 2 CPUs [ 2889.689374] SMP: Total of 2 processors activated. [ 2889.689378] CPU: All CPU(s) started in HYP mode. [ 2889.689382] CPU: Virtualization extensions available. [ 2889.689622] devtmpfs: initialized [ 2889.691495] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.691684] pinctrl core: initialized pinctrl subsystem [ 2889.691881] regulator-dummy: no parameters [ 2889.697835] NET: Registered protocol family 16 [ 2889.698705] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.699412] cpuidle: using governor ladder [ 2889.699421] cpuidle: using governor menu [ 2889.704470] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.708319] No ATAGs? [ 2889.708337] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.708342] hw-breakpoint: maximu~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.765067] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.765332] CPU: Testing write buffer coherency: ok [ 2889.765442] CPU0: update cpu_power 1024 [ 2889.765448] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.765544] Setting up static identity map for 0x408172e0 - 0x40817378 [ 2889.766652] CPU1: Booted secondary processor [ 2889.766686] CPU1: update cpu_power 1024 [ 2889.766690] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.766735] Brought up 2 CPUs [ 2889.766744] SMP: Total of 2 processors activated. [ 2889.766748] CPU: All CPU(s) started in HYP mode. [ 2889.766752] CPU: Virtualization extensions available. [ 2889.766990] devtmpfs: initialized [ 2889.768879] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.769070] pinctrl core: initialized pinctrl subsystem [ 2889.769269] regulator-dummy: no parameters [ 2889.775133] NET: Registered protocol family 16 [ 2889.776009] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.776715] cpuidle: using governor ladder [ 2889.776724] cpuidle: using governor menu [ 2889.781771] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.785601] No ATAGs? [ 2889.785619] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.785624] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.785722] EXYNOS5250 PMU Initialize [ 2889.786926] Serial: AMBA PL011 UART driver [ 2920.594308] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594321] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594613] vbat-supply: no parameters [ 2920.594751] P5.0V_USB3CON: 5000 mV [ 2920.595893] vgaarb: loaded [ 2920.596173] SCSI subsystem initialized [ 2920.596251] libata version 3.00 loaded. [ 2920.596394] usbcore: registered new interface driver usbfs [ 2920.596424] usbcore: registered new interface driver hub [ 2920.596476] usbcore: registered new device driver usb [ 2920.596891] Linux video capture interface: v2.00 [ 2920.596913] pps_core: LinuxPPS API ver. 1 registered [ 2920.596917] pps_core: Software ver. 5.3.6 - Copy~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.637542] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.645477] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.657409] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.664703] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.676177] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.684722] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.696655] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.703948] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.715423] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.723266] HS USB OTG: no transceiver configured [ 3.727966] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.735809] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.743743] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755676] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.762969] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774475] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.782989] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794921] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802246] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813720] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821533] HS USB OTG: no transceiver configured [ 3.826232] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.834106] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.842010] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853942] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.861267] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872741] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881286] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.893188] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.900512] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911987] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919799] HS USB OTG: no transceiver configured [ 3.924499] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932373] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940277] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.952178] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.959503] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970977] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 45 warnings 0 failures (mainline/v3.15-8163-g5b174fd)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 5b174fd Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-8163-g5b174fd/ Runtime: 45m 42s Passed: 126 Failed: 0 Warnings: 45 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 32 passed 9 failed (mainline/v3.15-8060-g1d21b1b)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:23.86 cubie2 multi_v7_defconfig : FAILED 1:39.03 cubie2 multi_lpae_defconfig : FAILED 1:21.97 cubox multi_v7_defconfig : FAILED 1:37.90 omap5uevm omap2plus_defconfig : FAILED 1:46.26 omap5uevm multi_v7_defconfig : FAILED 1:53.24 omap5uevm multi_lpae_defconfig : FAILED 1:49.07 snow multi_lpae_defconfig : FAILED 1:13.78 snowball u8500_defconfig : FAILED 1:55.74 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.54 arndale exynos_defconfig : passed 1:16.69 arndale multi_v7_defconfig : passed 1:43.59 arndale multi_lpae_defconfig : passed 1:35.67 bbb omap2plus_defconfig : passed 1:32.14 bbb multi_v7_defconfig : passed 1:30.28 beaver tegra_defconfig : passed 0:57.03 beaver multi_v7_defconfig : passed 1:06.77 capri bcm_defconfig : passed 0:39.20 capri multi_v7_defconfig : passed 0:41.37 cubie sunxi_defconfig : passed 1:16.00 cubie multi_v7_defconfig : passed 1:37.24 dalmore tegra_defconfig : passed 1:33.63 dalmore multi_v7_defconfig : passed 1:23.19 dalmore multi_lpae_defconfig : passed 1:19.05 hummingboard imx_v6_v7_defconfig : passed 1:25.66 hummingboard multi_v7_defconfig : passed 1:27.68 jetson tegra_defconfig : passed 1:03.95 jetson multi_v7_defconfig : passed 1:07.31 jetson multi_lpae_defconfig : passed 0:56.39 panda omap2plus_defconfig : warnings 1:32.33 panda multi_v7_defconfig : warnings 2:02.05 sama5 sama5_defconfig : passed 1:56.56 seaboard tegra_defconfig : passed 1:57.56 seaboard multi_v7_defconfig : passed 1:08.03 snow exynos_defconfig : passed 1:24.65 snow multi_v7_defconfig : passed 1:23.40 snowball multi_v7_defconfig : passed 3:04.05 trimslice tegra_defconfig : passed 1:07.41 trimslice multi_v7_defconfig : passed 1:09.58 wandboard imx_v6_v7_defconfig : passed 1:08.28 wandboard multi_v7_defconfig : passed 1:06.31 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.324245] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333215] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342752] scsi0 : ahci_platform [ 1.346467] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355205] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360851] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368911] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375124] mmc0: new high speed SDHC card at address aaaa [ 1.380999] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387277] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392835] hub 1-0:1.0: USB hub found [ 1.397072] hub 1-0:1.0: 1 port detected [ 1.401168] mmcblk0: p1 [ 1.405455] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411144] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419124] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430520] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437493] hub 2-0:1.0: USB hub found [ 1.441347] hub 2-0:1.0: 1 port detected [ 1.446363] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453058] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460898] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525384] hub 3-0:1.0: USB hub found [ 1.529238] hub 3-0:1.0: 1 port detected [ 1.534245] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.540959] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548819] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610336] hub 4-0:1.0: USB hub found [ 1.614173] hub 4-0:1.0: 1 port detected [ 1.618843] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.706410] No MAC Management Counters available [ 1.711181] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717806] IP-Config: Failed to open eth0 [ 1.721925] IP-Config: No network devices available [ 1.726840] vcc3v0: disabling [ 1.729921] ALSA device list: [ 1.732902] No soundcards found. [ 1.737048] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.319681] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.328650] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.338225] scsi0 : ahci_platform [ 1.341939] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.350681] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.356333] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.364385] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.370585] mmc0: new high speed SDHC card at address aaaa [ 1.376453] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.382725] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.388282] hub 1-0:1.0: USB hub found [ 1.392513] hub 1-0:1.0: 1 port detected [ 1.396602] mmcblk0: p1 [ 1.400915] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.406625] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.414602] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.425944] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.432962] hub 2-0:1.0: USB hub found [ 1.436802] hub 2-0:1.0: 1 port detected [ 1.441805] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.448491] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.456332] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.520784] hub 3-0:1.0: USB hub found [ 1.524652] hub 3-0:1.0: 1 port detected [ 1.529689] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.536411] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.544254] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.605771] hub 4-0:1.0: USB hub found [ 1.609613] hub 4-0:1.0: 1 port detected [ 1.614290] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.701825] No MAC Management Counters available [ 1.706599] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.713216] IP-Config: Failed to open eth0 [ 1.717335] IP-Config: No network devices available [ 1.722250] vcc3v0: disabling [ 1.725331] ALSA device list: [ 1.728313] No soundcards found. [ 1.732453] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.993887] mmc0: new high speed SDHC card at address aaaa [ 0.999816] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005816] mmcblk0: p1 [ 1.016080] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023562] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029474] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038448] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047335] scsi0 : ahci_platform [ 1.050980] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059250] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064853] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072722] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096001] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.102978] hub 1-0:1.0: USB hub found [ 1.106818] hub 1-0:1.0: 1 port detected [ 1.111298] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.116937] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124782] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.145992] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152891] hub 2-0:1.0: USB hub found [ 1.156724] hub 2-0:1.0: 1 port detected [ 1.161165] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167843] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175688] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240817] hub 3-0:1.0: USB hub found [ 1.244617] hub 3-0:1.0: 1 port detected [ 1.249127] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255759] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263630] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330863] hub 4-0:1.0: USB hub found [ 1.334651] hub 4-0:1.0: 1 port detected [ 1.339021] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.426021] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442320] No MAC Management Counters available [ 1.447087] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453687] IP-Config: Failed to open eth0 [ 1.457809] IP-Config: No network devices available [ 1.462709] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.240353] SPEAr-ehci: EHCI SPEAr driver [ 1.244455] tegra-ehci: Tegra EHCI driver [ 1.248583] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.254766] ohci-pci: OHCI PCI platform driver [ 1.259263] ohci-platform: OHCI generic platform driver [ 1.264585] ohci-omap3: OHCI OMAP3 driver [ 1.268686] SPEAr-ohci: OHCI SPEAr driver [ 1.273420] usbcore: registered new interface driver usb-storage [ 1.280923] mousedev: PS/2 mouse device common for all mice [ 1.287923] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297259] i2c /dev entries driver [ 1.303260] usbcore: registered new interface driver uvcvideo [ 1.309019] USB Video Class driver (1.1.1) [ 1.313120] gspca_main: v2.14.0 registered [ 1.320336] orion_wdt: Initial timeout 25 sec [ 1.325807] sdhci: Secure Digital Host Controller Interface driver [ 1.331973] sdhci: Copyright(c) Pierre Ossman [ 1.337026] Synopsys Designware Multimedia Card Interface Driver [ 1.343523] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.349921] usbcore: registered new interface driver usbhid [ 1.355485] usbhid: USB HID core driver [ 1.360452] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368473] TCP: cubic registered [ 1.371815] NET: Registered protocol family 17 [ 1.376274] can: controller area network core (rev 20120528 abi 9) [ 1.382510] NET: Registered protocol family 29 [ 1.386957] can: raw protocol (rev 20120528) [ 1.391221] can: broadcast manager protocol (rev 20120528 t) [ 1.396878] can: netlink gateway (rev 20130117) max_hops=1 [ 1.402764] Key type dns_resolver registered [ 1.407236] ThumbEE CPU extension supported. [ 1.411523] Registering SWP/SWPB emulation handler [ 1.416312] PJ4 iWMMXt v2 coprocessor enabled. [ 1.421939] USB Power: 5000 mV [ 1.425509] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-10 18:59:22 UTC (1402426762) [ 1.436043] ALSA device list: [ 1.438997] No soundcards found. [ 1.442920] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.092551] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.102198] mmcblk0: unknown partition table [ 47.102977] mmcblk0boot1: unknown partition table [ 47.103737] mmcblk0boot0: unknown partition table [ 47.117922] can: controller area network core (rev 20120528 abi 9) [ 47.124425] NET: Registered protocol family 29 [ 47.129074] can: raw protocol (rev 20120528) [ 47.133543] can: broadcast manager protocol (rev 20120528 t) [ 47.139467] can: netlink gateway (rev 20130117) max_hops=1 [ 47.145484] Key type dns_resolver registered [ 47.150015] omap_vc_init_channel: No PMIC info for vdd_core [ 47.155844] omap_vp_init: No PMIC info for vdd_core [ 47.160947] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.166589] omap_vp_init: No PMIC info for vdd_mm [ 47.171502] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.177225] omap_vp_init: No PMIC info for vdd_mpu [ 47.182511] ThumbEE CPU extension supported. [ 47.186988] Registering SWP/SWPB emulation handler [ 47.193199] palmas 0-0048: Irq flag is 0x00000000 [ 47.200925] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.208480] smps123: 600 <--> 1500 mV at 1060 mV [ 47.214613] smps45: 600 <--> 1310 mV at 1030 mV [ 47.221063] smps6: 1200 mV [ 47.225061] smps7: 1800 mV [ 47.229200] smps8: 600 <--> 1310 mV at 1040 mV [ 47.234940] smps9: failed to get the current voltage [ 47.240191] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.252238] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.276640] omap_i2c 48070000.i2c: controller timed out [ 48.381837] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.526847] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.532929] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.540367] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.547230] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.554932] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.568255] ALSA device list: [ 48.571349] No soundcards found. [ 48.575345] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.516525] can: raw protocol (rev 20120528) [ 47.516532] can: broadcast manager protocol (rev 20120528 t) [ 47.516544] can: netlink gateway (rev 20130117) max_hops=1 [ 47.516853] Key type dns_resolver registered [ 47.516937] omap_vc_init_channel: No PMIC info for vdd_core [ 47.516939] omap_vp_init: No PMIC info for vdd_core [ 47.516943] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.516945] omap_vp_init: No PMIC info for vdd_mm [ 47.516948] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.516950] omap_vp_init: No PMIC info for vdd_mpu [ 47.517258] ThumbEE CPU extension supported. [ 47.517273] Registering SWP/SWPB emulation handler [ 47.522575] palmas 0-0048: Irq flag is 0x00000000 [ 47.600217] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.606973] mmc0: new high speed MMC card at address 0001 [ 47.612859] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.617672] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.623934] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.630801] mmcblk0: unknown partition table [ 47.630808] smps123: 600 <--> 1500 mV at 1060 mV [ 47.641192] mmcblk0boot1: unknown partition table [ 47.646431] smps45: 600 <--> 1310 mV at 1030 mV [ 47.646950] mmcblk0boot0: unknown partition table [ 47.657854] smps6: 1200 mV [ 47.661822] smps7: 1800 mV [ 47.665926] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671643] smps9: failed to get the current voltage [ 47.676885] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.688929] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816851] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961861] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.967958] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975405] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982250] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.989956] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003438] ALSA device list: [ 48.006530] No soundcards found. [ 48.010526] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.013303] NET: Registered protocol family 17 [ 2.013352] NET: Registered protocol family 15 [ 2.013519] Key type dns_resolver registered [ 2.013616] omap_vc_init_channel: No PMIC info for vdd_core [ 2.013620] omap_vp_init: No PMIC info for vdd_core [ 2.013630] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.013633] omap_vp_init: No PMIC info for vdd_mm [ 2.013645] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.013648] omap_vp_init: No PMIC info for vdd_mpu [ 2.014202] ThumbEE CPU extension supported. [ 2.014224] Registering SWP/SWPB emulation handler [ 2.014233] SmartReflex Class3 initialized [ 2.027201] palmas 0-0048: Irq flag is 0x00000000 [ 2.116350] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.122906] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.131721] mmcblk0: unknown partition table [ 2.138588] mmcblk0boot1: unknown partition table [ 2.145416] mmcblk0boot0: unknown partition table [ 2.150499] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.203454] smps123: 600 <--> 1500 mV at 1060 mV [ 2.210508] smps45: 600 <--> 1310 mV at 1030 mV [ 2.217906] smps6: 1200 mV [ 2.222644] smps7: 1800 mV [ 2.227564] smps8: 600 <--> 1310 mV at 1040 mV [ 2.234023] smps9: failed to get the current voltage [ 2.239973] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.254325] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.263164] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.270959] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.277109] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.286245] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.295624] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.302589] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.311109] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.319755] sr_init: No PMIC hook to init smartreflex [ 2.325306] sr_init: platform driver register failed for SR [ 2.353288] pbias_mmc_omap5: disabling [ 2.358834] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.707818] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.708355] Console: colour dummy device 80x30 [ 2889.708366] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.708373] pid_max: default: 32768 minimum: 301 [ 2889.708437] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.708442] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.708714] CPU: Testing write buffer coherency: ok [ 2889.708825] CPU0: update cpu_power 1024 [ 2889.708831] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.708923] Setting up static identity map for 0x4081dfb0 - 0x4081e048 [ 2889.710018] CPU1: Booted secondary processor [ 2889.710054] CPU1: update cpu_power 1024 [ 2889.710057] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.710103] Brought up 2 CPUs [ 2889.710112] SMP: Total of 2 processors activated. [ 2889.710116] CPU: All CPU(s) started in HYP mode. [ 2889.710120] CPU: Virtualization extensions available. [ 2889.710361] devtmpfs: initialized [ 2889.712226] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.712412] pinctrl core: initialized pinctrl subsystem [ 2889.712612] regulator-dummy: no parameters [ 2889.718536] NET: Registered protocol family 16 [ 2889.719409] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.720111] cpuidle: using governor ladder [ 2889.720121] cpuidle: using governor menu [ 2889.725155] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.729007] No ATAGs? [ 2889.729025] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.729030] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.729123] EXYNOS5250 PMU Initialize [ 2889.730333] Serial: AMBA PL011 UART driver [ 2920.594297] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594310] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594602] vbat-supply: no parameters [ 2920.594747] P5.0V_USB3CON: 5000 mV [ 2920.595874] vgaarb: loaded [ 2920.596171] SCSI s~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.536743] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.548675] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.555999] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.567474] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.575988] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.587890] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.595214] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.606689] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.614532] HS USB OTG: no transceiver configured [ 3.619232] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.627075] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635009] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.646911] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654235] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665710] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674255] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686187] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693511] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.704986] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712799] HS USB OTG: no transceiver configured [ 3.717498] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725341] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733276] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745208] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752502] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764007] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772521] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784423] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791748] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803222] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811035] HS USB OTG: no transceiver configured [ 3.815734] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823608] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831512] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843444] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850738] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862213] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870727] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 45 warnings 0 failures (mainline/v3.15-8060-g1d21b1b)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 1d21b1b Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-8060-g1d21b1b/ Runtime: 45m 50s Passed: 126 Failed: 0 Warnings: 45 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports