Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

mainline boot: 64 boots: 61 pass, 3 fail (v3.15-8947-gc31c24b)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-8947-gc31c24b Failed boot tests (console logs at the end) =========================================== qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.2 sec: PASS da850-evm 0 min 14.9 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS tegra30-beaver 0 min 17.5 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.8 sec: PASS omap5-uevm 1 min 39.7 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.0 sec: PASS armada-370-mirabox 0 min 20.7 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.3 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS omap3-beagle-xm 0 min 50.4 sec: PASS legacy,3530beagle 0 min 23.7 sec: PASS (Warnings: 1) omap4-panda 0 min 50.7 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.4 sec: PASS am335x-bone 0 min 24.1 sec: PASS omap3-overo-storm-tobi 0 min 21.9 sec: PASS omap5-uevm 1 min 0.9 sec: PASS (Warnings: 1) omap3-n900 0 min 17.7 sec: PASS legacy,n900 0 min 17.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 55.3 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.8 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.5 sec: PASS am335x-boneblack 0 min 21.8 sec: PASS sun7i-a20-cubieboard2 0 min 13.0 sec: PASS sun4i-a10-cubieboard 0 min 17.3 sec: PASS exynos5410-smdk5410 0 min 28.5 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 50.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.2 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.2 sec: PASS ste-snowball 1 min 14.5 sec: PASS tegra30-beaver 0 min 17.7 sec: PASS omap3-n900 0 min 15.8 sec: PASS qcom-apq8074-dragonboard 0 min 18.3 sec: PASS bcm28155-ap 0 min 26.2 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS omap3-overo-storm-tobi 0 min 23.5 sec: PASS omap3-beagle-xm 0 min 51.7 sec: PASS exynos5420-arndale-octa 0 min 40.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 43.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 49.6 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.3 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.5 sec: PASS sun4i-a10-cubieboard 0 min 11.6 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.4 sec: FAIL arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.4 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 40.7 sec: FAIL exynos5250-arndale 0 min 29.9 sec: PASS exynos5410-smdk5410 0 min 27.0 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.3 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.4 sec: PASS armada-370-mirabox 0 min 22.2 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard: FAIL: last 40 lines of boot log: ---------------------------------------------------------- [ 1.514198] bfa0: 60000113 ffffffff [ 1.522359] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.525664] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.533301] [<c025866c>] (cpu_startup_entry) from [<c091caa8>] (start_kernel+0x2e8/0x344) [ 1.541372] [<c091caa8>] (start_kernel) from [<00208074>] (0x208074) [ 1.549616] CPU2: stopping [ 1.556040] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.15.0-08947-gc31c24b #1 [ 1.558578] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.566822] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.574715] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.581743] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.589295] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.596664] Exception stack(0xee097f98 to 0xee097fe0) [ 1.604215] 7f80: 00000002 c085188c [ 1.609256] 7fa0: 00000050 00000000 ee096000 ee096000 ee096000 c09b31fc c097246c 512f06f0 [ 1.617415] 7fc0: c06d88ec c09b31fc 00000020 ee097fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.625584] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.633742] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.641203] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.649270] CPU3: stopping [ 1.656126] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-08947-gc31c24b #1 [ 1.658752] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.666994] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.674888] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.681916] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.689468] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.696839] Exception stack(0xee099f98 to 0xee099fe0) [ 1.704388] 9f80: 00000003 c085188c [ 1.709432] 9fa0: 00000048 00000000 ee098000 ee098000 ee098000 c09b31fc c097246c 512f06f0 [ 1.717591] 9fc0: c06d88ec c09b31fc 00000020 ee099fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.725758] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.733914] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.741377] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.749446] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.749446] ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 # PYBOOT: Time: 17.41 seconds. # PYBOOT: Result: FAIL arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 16.252157] of_get_named_gpiod_flags exited with status 0 [ 16.256272] mmcblk0: p1 p2 p3 p4 [ 16.259439] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00b8088 [ 16.266976] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.271912] Modules linked in: [ 16.274949] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-08947-gc31c24b #1 [ 16.283532] Workqueue: kmmcd mmc_rescan [ 16.287338] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.292717] PC is at rescan_partitions+0xb4/0x290 [ 16.297390] LR is at 0xf00b8000 [ 16.300511] pc : [<c01afcd8>] lr : [<f00b8000>] psr: 20000113 [ 16.300511] sp : ef0b5c80 ip : 00000000 fp : 00000000 [ 16.311947] r10: 00000000 r9 : ef2f3040 r8 : ef1bf200 [ 16.317146] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.323646] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.330147] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.337425] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.343143] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.349469] Stack: (0xef0b5c80 to 0xef0b6000) [ 16.353805] 5c80: c054c214 00000001 ef0b4000 c0387150 00000001 c05284f8 ed5e7598 c05283c8 [ 16.361949] 5ca0: eec24380 ed5e7468 eec24330 eec24280 00000000 ed5e7468 00000000 00000000 [ 16.370095] 5cc0: 00000000 eec24280 ef1bf200 eec24290 00000001 00000000 00000000 c00e305c [ 16.378240] 5ce0: c00e19fc 00000000 00000000 00000001 eec24280 00000000 ef1bf270 ef1bf20c [ 16.386385] 5d00: 00000000 ed5e7380 00000003 c00e32c0 c052a6cc 00000001 00000003 c0388418 [ 16.394531] 5d20: c052a6cc c00e1fcc ef0b5d34 c02222ec ef1bf240 00000001 eec24280 ef1bf200 [ 16.402676] 5d40: ef1bf270 ef1bf20c 00000000 ed5e7380 00000003 c01adbf0 c01aca44 ef1bf200 [ 16.410822] 5d60: 00000080 0b300000 00000002 ef2f8000 ef2f8400 ef2ffc00 ef2ffc00 ef2ffebc [ 16.418968] 5d80: c02baca8 ef2f8400 ef2ffc00 ef2f8588 ef0b5dd6 c02bbbac 00000056 ef2f846c [ 16.427113] 5da0: 00000003 ef2f8000 ef2f8400 c02bc7dc 00000003 ef0b5dd6 00000008 ed545708 [ 16.435258] 5dc0: c046a0a8 ef2ffe98 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 16.443404] 5de0: 00000001 ef2f8408 c058de1c 00000000 c054c19c 00000001 00000000 c054be48 [ 16.451550] 5e00: ef013c00 c02b112c c02b1114 c0225d90 00000000 ef2f8408 c0225f40 ef2fc008 [ 16.459695] 5e20: 00000000 c022456c ef351698 ed597ec4 ef2f8408 ef2f843c c054bd68 c0225c6c [ 16.467840] 5e40: ef2f8408 ef2f8408 c054bd68 c02253dc ef2f8408 00000000 ef2f8410 c0223a44 [ 16.475986] 5e60: ef013c00 c0381094 c047d27c ef0b5e84 00061a80 ef2f8400 ef2f8408 c047d228 [ 16.484131] 5e80: 00061a80 c03b10ac 00000000 c02b154c c047d228 c0452000 c047d1e4 00000001 [ 16.492276] 5ea0: ef2fc000 00000000 ef2fc000 c02b3f98 00061a80 40ff8080 00~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 40.70 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.497314] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.505157] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.513183] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.525115] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.532409] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.543914] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.552520] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.564453] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.571777] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.583251] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.591064] HS USB OTG: no transceiver configured [ 3.595764] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.603637] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.611633] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.623565] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.630889] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.642364] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.651000] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.662933] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.670227] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.681701] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.689514] HS USB OTG: no transceiver configured [ 3.694244] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.702087] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.710083] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.722015] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.729309] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.740814] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.749420] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.761352] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.768646] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.780151] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.787963] HS USB OTG: no transceiver configured [ 3.792663] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.800506] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.808502] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.35 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

mainline boot: 64 boots: 61 pass, 3 fail (v3.15-8870-g2840c56)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-8870-g2840c56 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.2 sec: PASS da850-evm 0 min 14.9 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 18.2 sec: PASS tegra30-beaver 0 min 18.3 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS omap5-uevm 1 min 41.5 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.4 sec: FAIL armada-370-mirabox 0 min 20.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.8 sec: PASS am335x-boneblack 0 min 22.2 sec: PASS omap3-beagle-xm 0 min 47.8 sec: PASS legacy,3530beagle 0 min 30.7 sec: PASS (Warnings: 1) omap4-panda 0 min 48.9 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 22.9 sec: PASS am335x-bone 0 min 24.2 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 0 min 53.5 sec: PASS (Warnings: 1) omap3-n900 0 min 16.7 sec: PASS legacy,n900 0 min 17.7 sec: PASS (Warnings: 1) omap4-panda-es 0 min 51.6 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.5 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS am335x-boneblack 0 min 22.3 sec: PASS sun7i-a20-cubieboard2 0 min 13.1 sec: PASS sun4i-a10-cubieboard 0 min 20.3 sec: PASS exynos5410-smdk5410 0 min 28.4 sec: PASS am335x-bone 0 min 23.6 sec: PASS tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 53.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 11.5 sec: PASS tegra30-beaver 0 min 17.3 sec: PASS omap3-n900 0 min 15.1 sec: PASS qcom-apq8074-dragonboard 0 min 18.0 sec: PASS bcm28155-ap 0 min 26.4 sec: PASS omap3-overo-tobi 0 min 22.0 sec: PASS omap3-overo-storm-tobi 0 min 23.8 sec: PASS omap3-beagle-xm 0 min 48.8 sec: PASS exynos5420-arndale-octa 0 min 39.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS omap5-uevm 1 min 45.5 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.4 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.0 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.4 sec: PASS sun4i-a10-cubieboard 0 min 11.2 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.1 sec: FAIL arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.8 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.5 sec: PASS exynos5250-arndale 0 min 29.8 sec: PASS exynos5410-smdk5410 0 min 26.9 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.6 sec: PASS imx6q-wandboard 0 min 14.0 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.4 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.7 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 55048012 02109471 [<c0186d78>] (_set_bit) from [<c01c9e00>] (n_tty_set_termios+0x234/0x348) [<c01c9e00>] (n_tty_set_termios) from [<c01ca000>] (n_tty_open+0xec/0x114) [<c01ca000>] (n_tty_open) from [<c01cda5c>] (tty_ldisc_open+0x3c/0x78) [<c01cda5c>] (tty_ldisc_open) from [<c01ce1d8>] (tty_ldisc_setup+0x18/0x5c) [<c01ce1d8>] (tty_ldisc_setup) from [<c01c6e4c>] (tty_init_dev+0x94/0x184) [<c01c6e4c>] (tty_init_dev) from [<c01c7758>] (tty_open+0x2d0/0x5a8) [<c01c7758>] (tty_open) from [<c00ae758>] (chrdev_open+0xc4/0x184) [<c00ae758>] (chrdev_open) from [<c00a91d8>] (do_dentry_open.isra.12+0x1b0/0x270) [<c00a91d8>] (do_dentry_open.isra.12) from [<c00a9368>] (finish_open+0x20/0x38) [<c00a9368>] (finish_open) from [<c00b7404>] (do_last.isra.41+0x5a4/0xb50) [<c00b7404>] (do_last.isra.41) from [<c00b7a64>] (path_openat+0xb4/0x5c8) [<c00b7a64>] (path_openat) from [<c00b827c>] (do_filp_open+0x2c/0x80) [<c00b827c>] (do_filp_open) from [<c00aa2c0>] (do_sys_open+0x110/0x1cc) [<c00aa2c0>] (do_sys_open) from [<c0587c0c>] (kernel_init_freeable+0x128/0x1c8) [<c0587c0c>] (kernel_init_freeable) from [<c0424a98>] (kernel_init+0x8/0xec) [<c0424a98>] (kernel_init) from [<c000e638>] (ret_from_fork+0x14/0x3c) Code: 00f091f5 1233a0e1 9f2f91e1 032082e1 (920f81e1) ---[ end trace 6fc9844b942dcfb3 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.15.0-08870-g2840c56 #1 [<c0014b04>] (unwind_backtrace) from [<c0010eb0>] (show_stack+0x10/0x14) [<c0010eb0>] (show_stack) from [<c0427b58>] (dump_stack+0x74/0x90) [<c0427b58>] (dump_stack) from [<c00139dc>] (handle_IPI+0x134/0x170) [<c00139dc>] (handle_IPI) from [<c0008650>] (armada_370_xp_handle_irq+0xb0/0xcc) [<c0008650>] (armada_370_xp_handle_irq) from [<c0011980>] (__irq_svc+0x40/0x50) Exception stack(0xed87dfa0 to 0xed87dfe8) dfa0: edfd53d8 00000000 000008cc 00000000 ed87c000 c05c649c ed87c000 c042ed74 dfc0: c05fae95 00000001 c05fae95 ed87c000 00000000 ed87dfe8 c000f168 c004eb90 dfe0: 60000313 ffffffff [<c0011980>] (__irq_svc) from [<c004eb90>] (cpu_startup_entry+0xec/0x144) [<c004eb90>] (cpu_startup_entry) from [<00008768>] (0x8768) ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 23.40 seconds. # PYBOOT: Result: FAIL arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard: FAIL: last 40 lines of boot log: ---------------------------------------------------------- [ 1.514187] bfa0: 60000113 ffffffff [ 1.522347] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.525651] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.533291] [<c025866c>] (cpu_startup_entry) from [<c091caa8>] (start_kernel+0x2e8/0x344) [ 1.541360] [<c091caa8>] (start_kernel) from [<00208074>] (0x208074) [ 1.549604] CPU2: stopping [ 1.556028] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.15.0-08870-g2840c56 #1 [ 1.558566] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.566808] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.574703] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.581729] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.589284] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.596652] Exception stack(0xee097f98 to 0xee097fe0) [ 1.604204] 7f80: 00000002 c085188c [ 1.609245] 7fa0: 00000050 00000000 ee096000 ee096000 ee096000 c09b31fc c097246c 512f06f0 [ 1.617405] 7fc0: c06d88ec c09b31fc 00000020 ee097fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.625573] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.633729] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.641192] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.649257] CPU3: stopping [ 1.656113] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-08870-g2840c56 #1 [ 1.658739] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.666982] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.674877] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.681904] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.689456] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.696825] Exception stack(0xee099f98 to 0xee099fe0) [ 1.704376] 9f80: 00000003 c085188c [ 1.709419] 9fa0: 00000048 00000000 ee098000 ee098000 ee098000 c09b31fc c097246c 512f06f0 [ 1.717578] 9fc0: c06d88ec c09b31fc 00000020 ee099fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.725747] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.733903] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.741366] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.749436] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.749436] ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 # PYBOOT: Time: 16.06 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ----------------------------------------------

11 years, 5 months

mainline boot: 33 passed 8 failed (mainline/v3.15-8947-gc31c24b)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:24.43 cubie2 multi_v7_defconfig : FAILED 1:34.72 cubie2 multi_lpae_defconfig : FAILED 1:25.66 omap5uevm omap2plus_defconfig : FAILED 1:44.97 omap5uevm multi_v7_defconfig : FAILED 1:45.25 omap5uevm multi_lpae_defconfig : FAILED 1:43.28 snow multi_v7_defconfig : FAILED 1:15.91 snowball u8500_defconfig : FAILED 1:45.41 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.16 arndale exynos_defconfig : passed 1:46.90 arndale multi_v7_defconfig : passed 1:33.42 arndale multi_lpae_defconfig : passed 1:21.17 bbb omap2plus_defconfig : passed 1:32.03 bbb multi_v7_defconfig : passed 1:14.05 beaver tegra_defconfig : passed 1:02.77 beaver multi_v7_defconfig : passed 1:02.01 capri bcm_defconfig : passed 0:39.04 capri multi_v7_defconfig : passed 0:42.17 cubie sunxi_defconfig : passed 1:32.21 cubie multi_v7_defconfig : warnings 1:22.75 cubox multi_v7_defconfig : passed 1:20.87 dalmore tegra_defconfig : passed 1:36.45 dalmore multi_v7_defconfig : passed 1:24.16 dalmore multi_lpae_defconfig : passed 1:33.66 hummingboard imx_v6_v7_defconfig : passed 1:24.11 hummingboard multi_v7_defconfig : passed 1:14.47 jetson tegra_defconfig : passed 1:00.84 jetson multi_v7_defconfig : passed 1:03.82 jetson multi_lpae_defconfig : passed 1:03.09 panda omap2plus_defconfig : warnings 1:38.28 panda multi_v7_defconfig : warnings 2:12.41 sama5 sama5_defconfig : warnings 1:59.57 seaboard tegra_defconfig : passed 1:03.83 seaboard multi_v7_defconfig : passed 1:18.35 snow exynos_defconfig : passed 1:32.44 snow multi_lpae_defconfig : passed 1:24.41 snowball multi_v7_defconfig : passed 3:09.65 trimslice tegra_defconfig : passed 1:03.55 trimslice multi_v7_defconfig : passed 1:13.54 wandboard imx_v6_v7_defconfig : passed 1:14.29 wandboard multi_v7_defconfig : passed 1:00.45 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.329266] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338231] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347782] scsi0 : ahci_platform [ 1.351496] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360242] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365890] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373953] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.380157] mmc0: new high speed SDHC card at address aaaa [ 1.386034] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392313] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397873] hub 1-0:1.0: USB hub found [ 1.402110] hub 1-0:1.0: 1 port detected [ 1.406202] mmcblk0: p1 [ 1.410497] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.416192] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.424170] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435520] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442497] hub 2-0:1.0: USB hub found [ 1.446346] hub 2-0:1.0: 1 port detected [ 1.451366] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.458065] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465909] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530367] hub 3-0:1.0: USB hub found [ 1.534222] hub 3-0:1.0: 1 port detected [ 1.539228] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545949] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553812] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615347] hub 4-0:1.0: USB hub found [ 1.619185] hub 4-0:1.0: 1 port detected [ 1.623861] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.711393] No MAC Management Counters available [ 1.716167] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722797] IP-Config: Failed to open eth0 [ 1.726922] IP-Config: No network devices available [ 1.731841] vcc3v0: disabling [ 1.734921] ALSA device list: [ 1.737902] No soundcards found. [ 1.742034] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.324323] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333289] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342851] scsi0 : ahci_platform [ 1.346567] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355318] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360969] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.369024] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375229] mmc0: new high speed SDHC card at address aaaa [ 1.381110] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387388] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392939] hub 1-0:1.0: USB hub found [ 1.397170] hub 1-0:1.0: 1 port detected [ 1.401264] mmcblk0: p1 [ 1.405576] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411269] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419246] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430618] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437651] hub 2-0:1.0: USB hub found [ 1.441492] hub 2-0:1.0: 1 port detected [ 1.446501] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453188] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.461032] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525497] hub 3-0:1.0: USB hub found [ 1.529341] hub 3-0:1.0: 1 port detected [ 1.534379] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.541100] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548943] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610450] hub 4-0:1.0: USB hub found [ 1.614290] hub 4-0:1.0: 1 port detected [ 1.618969] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.706500] No MAC Management Counters available [ 1.711274] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717889] IP-Config: Failed to open eth0 [ 1.722012] IP-Config: No network devices available [ 1.726930] vcc3v0: disabling [ 1.730008] ALSA device list: [ 1.732989] No soundcards found. [ 1.737136] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.993955] mmc0: new high speed SDHC card at address aaaa [ 0.999877] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005878] mmcblk0: p1 [ 1.016162] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023646] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029555] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038528] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047417] scsi0 : ahci_platform [ 1.051067] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059339] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064938] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072811] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096088] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103051] hub 1-0:1.0: USB hub found [ 1.106887] hub 1-0:1.0: 1 port detected [ 1.111360] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.116999] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124838] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146081] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152978] hub 2-0:1.0: USB hub found [ 1.156805] hub 2-0:1.0: 1 port detected [ 1.161254] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167927] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175765] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240903] hub 3-0:1.0: USB hub found [ 1.244699] hub 3-0:1.0: 1 port detected [ 1.249218] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255850] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263722] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330928] hub 4-0:1.0: USB hub found [ 1.334713] hub 4-0:1.0: 1 port detected [ 1.339082] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.426105] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442394] No MAC Management Counters available [ 1.447160] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453763] IP-Config: Failed to open eth0 [ 1.457893] IP-Config: No network devices available [ 1.462788] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.092632] NET: Registered protocol family 17 [ 47.092658] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.102169] mmcblk0: unknown partition table [ 47.102951] mmcblk0boot1: unknown partition table [ 47.103702] mmcblk0boot0: unknown partition table [ 47.118028] can: controller area network core (rev 20120528 abi 9) [ 47.124526] NET: Registered protocol family 29 [ 47.129176] can: raw protocol (rev 20120528) [ 47.133644] can: broadcast manager protocol (rev 20120528 t) [ 47.139567] can: netlink gateway (rev 20130117) max_hops=1 [ 47.145603] Key type dns_resolver registered [ 47.150144] omap_vc_init_channel: No PMIC info for vdd_core [ 47.155965] omap_vp_init: No PMIC info for vdd_core [ 47.161061] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.166698] omap_vp_init: No PMIC info for vdd_mm [ 47.171616] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.177343] omap_vp_init: No PMIC info for vdd_mpu [ 47.182624] ThumbEE CPU extension supported. [ 47.187099] Registering SWP/SWPB emulation handler [ 47.193312] palmas 0-0048: Irq flag is 0x00000000 [ 47.201000] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.208574] smps123: 600 <--> 1500 mV at 1060 mV [ 47.214708] smps45: 600 <--> 1310 mV at 1030 mV [ 47.221157] smps6: 1200 mV [ 47.225154] smps7: 1800 mV [ 47.229293] smps8: 600 <--> 1310 mV at 1040 mV [ 47.235036] smps9: failed to get the current voltage [ 47.240278] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.252324] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.376810] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.521818] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.527894] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.535334] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.542195] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.549899] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.563344] ALSA device list: [ 47.566435] No soundcards found. [ 47.570437] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.516539] can: raw protocol (rev 20120528) [ 47.516559] can: broadcast manager protocol (rev 20120528 t) [ 47.516570] can: netlink gateway (rev 20130117) max_hops=1 [ 47.516874] Key type dns_resolver registered [ 47.516957] omap_vc_init_channel: No PMIC info for vdd_core [ 47.516959] omap_vp_init: No PMIC info for vdd_core [ 47.516963] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.516965] omap_vp_init: No PMIC info for vdd_mm [ 47.516968] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.516970] omap_vp_init: No PMIC info for vdd_mpu [ 47.517283] ThumbEE CPU extension supported. [ 47.517296] Registering SWP/SWPB emulation handler [ 47.522478] palmas 0-0048: Irq flag is 0x00000000 [ 47.600190] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.606910] mmc0: new high speed MMC card at address 0001 [ 47.612832] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.617655] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.623922] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.630387] smps123: 600 <--> 1500 mV at 1060 mV [ 47.635669] mmcblk0: unknown partition table [ 47.641026] mmcblk0boot1: unknown partition table [ 47.646059] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651318] mmcblk0boot0: unknown partition table [ 47.657466] smps6: 1200 mV [ 47.661465] smps7: 1800 mV [ 47.665604] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671345] smps9: failed to get the current voltage [ 47.676602] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.688660] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816764] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961773] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.967866] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975313] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982168] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.989892] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003331] ALSA device list: [ 48.006426] No soundcards found. [ 48.010419] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.003014] NET: Registered protocol family 15 [ 2.003190] Key type dns_resolver registered [ 2.003303] omap_vc_init_channel: No PMIC info for vdd_core [ 2.003306] omap_vp_init: No PMIC info for vdd_core [ 2.003316] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.003319] omap_vp_init: No PMIC info for vdd_mm [ 2.003329] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.003332] omap_vp_init: No PMIC info for vdd_mpu [ 2.003866] ThumbEE CPU extension supported. [ 2.003887] Registering SWP/SWPB emulation handler [ 2.003896] SmartReflex Class3 initialized [ 2.033473] palmas 0-0048: Irq flag is 0x00000000 [ 2.111559] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.116642] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.123062] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.131996] mmcblk0: unknown partition table [ 2.138854] mmcblk0boot1: unknown partition table [ 2.145801] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.151342] mmcblk0boot0: unknown partition table [ 2.203249] smps123: 600 <--> 1500 mV at 1060 mV [ 2.210294] smps45: 600 <--> 1310 mV at 1030 mV [ 2.217640] smps6: 1200 mV [ 2.222371] smps7: 1800 mV [ 2.227231] smps8: 600 <--> 1310 mV at 1040 mV [ 2.233697] smps9: failed to get the current voltage [ 2.239639] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.253922] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.262753] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.270511] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.276675] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.285823] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.295207] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.302174] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.310721] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.319357] sr_init: No PMIC hook to init smartreflex [ 2.324871] sr_init: platform driver register failed for SR [ 2.353080] pbias_mmc_omap5: disabling [ 2.358589] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0ad113c (8997 kB) [ 0.000000] .init : 0xc0ad2000 - 0xc0b76100 ( 657 kB) [ 0.000000] .data : 0xc0b78000 - 0xc0c563c0 ( 889 kB) [ 0.000000] .bss : 0xc0c563c8 - 0xc0ca1418 ( 301 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000007] Switching to timer-based delay loop [ 2889.664126] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.664676] Console: colour dummy device 80x30 [ 2889.664688] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.664695] pid_max: default: 32768 minimum: 301 [ 2889.664756] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.664762] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.665031] CPU: Testing write buffer coherency: ok [ 2889.665142] CPU0: update cpu_power 1024 [ 2889.665147] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.665246] Setting up static identity map for 0x40816178 - 0x40816210 [ 2889.666361] CPU1: Booted secondary processor [ 2889.666392] CPU1: update cpu_power 1024 [ 2889.666395] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.666438] Brought up 2 CPUs [ 2889.666446] SMP: Total of 2 processors activated. [ 2889.666450] CPU: All CPU(s) started in HYP mode. [ 2889.666453] CPU: Virtualization extensions available. [ 2889.666696] devtmpfs: initialized [ 2889.668596] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.668784] pinctrl core: initialized pinctrl subsystem [ 2889.668984] regulator-dummy: no parameters [ 2889.674812] NET: Registered protocol family 16 [ 2889.675687] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.538604] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550537] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.557861] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569335] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.577911] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.589843] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597137] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608642] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616455] HS USB OTG: no transceiver configured [ 3.621154] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.628997] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.636932] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.648864] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656158] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667663] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676208] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688140] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695465] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.706939] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714752] HS USB OTG: no transceiver configured [ 3.719482] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727325] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735260] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747192] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754516] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.765991] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774566] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786468] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.793792] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805267] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813079] HS USB OTG: no transceiver configured [ 3.817779] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825653] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833587] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845520] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852813] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864288] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.872863] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 44 warnings 0 failures (mainline/v3.15-8947-gc31c24b)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: c31c24b Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-8947-gc31c24b/ Runtime: 45m 39s Passed: 126 Failed: 0 Warnings: 44 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 64 boots: 61 pass, 3 fail (v3.15-8884-g2dc24b0)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-8884-g2dc24b0 Failed boot tests (console logs at the end) =========================================== qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.3 sec: PASS da850-evm 0 min 14.8 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS tegra30-beaver 0 min 17.6 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.6 sec: PASS omap5-uevm 1 min 42.6 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.1 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.1 sec: PASS armada-370-mirabox 0 min 20.8 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.5 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 50.7 sec: PASS legacy,3530beagle 0 min 28.2 sec: PASS (Warnings: 1) omap4-panda 0 min 50.0 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 26.2 sec: PASS am335x-bone 0 min 24.0 sec: PASS omap3-overo-storm-tobi 0 min 24.7 sec: PASS omap5-uevm 0 min 56.8 sec: PASS (Warnings: 1) omap3-n900 0 min 17.7 sec: PASS legacy,n900 0 min 16.5 sec: PASS (Warnings: 1) omap4-panda-es 0 min 53.9 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.3 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 28.9 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-370-mirabox 0 min 22.1 sec: PASS omap4-panda 0 min 54.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 16.3 sec: PASS ste-snowball 1 min 14.7 sec: PASS tegra30-beaver 0 min 19.8 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 19.0 sec: PASS bcm28155-ap 0 min 25.6 sec: PASS omap3-overo-tobi 0 min 22.6 sec: PASS omap3-overo-storm-tobi 0 min 23.3 sec: PASS omap3-beagle-xm 0 min 50.4 sec: PASS exynos5420-arndale-octa 0 min 39.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.6 sec: PASS omap5-uevm 1 min 39.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.7 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.5 sec: PASS sun4i-a10-cubieboard 0 min 11.5 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.5 sec: FAIL arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.0 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.5 sec: FAIL exynos5250-arndale 0 min 30.5 sec: PASS exynos5410-smdk5410 0 min 27.2 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.6 sec: PASS imx6q-wandboard 0 min 14.2 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.7 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard: FAIL: last 40 lines of boot log: ---------------------------------------------------------- [ 1.514103] bfa0: 60000113 ffffffff [ 1.522264] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.525569] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.533208] [<c025866c>] (cpu_startup_entry) from [<c091caa8>] (start_kernel+0x2e8/0x344) [ 1.541279] [<c091caa8>] (start_kernel) from [<00208074>] (0x208074) [ 1.549520] CPU2: stopping [ 1.555943] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.15.0-08884-g2dc24b0 #1 [ 1.558483] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.566726] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.574618] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.581647] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.589199] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.596569] Exception stack(0xee097f98 to 0xee097fe0) [ 1.604121] 7f80: 00000002 c085188c [ 1.609163] 7fa0: 00000050 00000000 ee096000 ee096000 ee096000 c09b31fc c097246c 512f06f0 [ 1.617322] 7fc0: c06d88ec c09b31fc 00000020 ee097fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.625489] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.633647] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.641109] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.649175] CPU3: stopping [ 1.656030] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-08884-g2dc24b0 #1 [ 1.658658] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.666900] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.674792] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.681820] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.689373] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.696744] Exception stack(0xee099f98 to 0xee099fe0) [ 1.704293] 9f80: 00000003 c085188c [ 1.709337] 9fa0: 00000048 00000000 ee098000 ee098000 ee098000 c09b31fc c097246c 512f06f0 [ 1.717494] 9fc0: c06d88ec c09b31fc 00000020 ee099fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.725662] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.733821] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.741282] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.749352] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.749352] ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 # PYBOOT: Time: 16.48 seconds. # PYBOOT: Result: FAIL arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 16.252204] of_get_named_gpiod_flags exited with status 0 [ 16.256327] mmcblk0: p1 p2 p3 p4 [ 16.259497] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00b8088 [ 16.267035] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.271970] Modules linked in: [ 16.275007] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-08884-g2dc24b0 #1 [ 16.283590] Workqueue: kmmcd mmc_rescan [ 16.287396] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.292773] PC is at rescan_partitions+0xb4/0x290 [ 16.297447] LR is at 0xf00b8000 [ 16.300569] pc : [<c01afcd8>] lr : [<f00b8000>] psr: 20000113 [ 16.300569] sp : ef0b5c80 ip : 00000000 fp : 00000000 [ 16.312005] r10: 00000000 r9 : ef2f3040 r8 : ed6ff200 [ 16.317205] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.323704] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.330204] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.337482] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.343201] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.349527] Stack: (0xef0b5c80 to 0xef0b6000) [ 16.353864] 5c80: c054c214 00000001 ef0b4000 c0387150 00000001 c05284f8 ed577598 c05283c8 [ 16.362008] 5ca0: eec24380 ed577468 eec24330 eec24280 00000000 ed577468 00000000 00000000 [ 16.370153] 5cc0: 00000000 eec24280 ed6ff200 eec24290 00000001 00000000 00000000 c00e305c [ 16.378298] 5ce0: c00e19fc 00000000 00000000 00000001 eec24280 00000000 ed6ff270 ed6ff20c [ 16.386443] 5d00: 00000000 ed577380 00000003 c00e32c0 c052a6cc 00000001 00000003 c0388418 [ 16.394589] 5d20: c052a6cc c00e1fcc ef0b5d34 c02222ec ed6ff240 00000001 eec24280 ed6ff200 [ 16.402734] 5d40: ed6ff270 ed6ff20c 00000000 ed577380 00000003 c01adbf0 c01aca44 ed6ff200 [ 16.410881] 5d60: 00000080 0b300000 00000002 ef2f8c00 ef2fec00 ef2f9800 ef2f9800 ef2f9abc [ 16.419026] 5d80: c02baca8 ef2fec00 ef2f9800 ef2fed88 ef0b5dd6 c02bbbac 00000056 ef2fec6c [ 16.427171] 5da0: 00000003 ef2f8c00 ef2fec00 c02bc7dc 00000003 ef0b5dd6 00000008 ed63d708 [ 16.435317] 5dc0: c046a0a8 ef2f9a98 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 16.443462] 5de0: 00000001 ef2fec08 c058de1c 00000000 c054c19c 00000001 00000000 c054be48 [ 16.451607] 5e00: ef013c00 c02b112c c02b1114 c0225d90 00000000 ef2fec08 c0225f40 ef2f8808 [ 16.459753] 5e20: 00000000 c022456c ef351698 ef203b44 ef2fec08 ef2fec3c c054bd68 c0225c6c [ 16.467898] 5e40: ef2fec08 ef2fec08 c054bd68 c02253dc ef2fec08 00000000 ef2fec10 c0223a44 [ 16.476044] 5e60: ef013c00 c0381094 c047d27c ef0b5e84 00061a80 ef2fec00 ef2fec08 c047d228 [ 16.484190] 5e80: 00061a80 c03b10ac 00000000 c02b154c c047d228 c0452000 c047d1e4 00000001 [ 16.492335] 5ea0: ef2f8800 00000000 ef2f8800 c02b3f98 00061a80 40ff8080 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.45 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.497314] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.505187] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.513183] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.525115] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.532440] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.543914] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.552520] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.564453] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.571777] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.583251] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.591064] HS USB OTG: no transceiver configured [ 3.595764] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.603637] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.611663] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.623565] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.630889] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.642364] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.651000] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.662933] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.670227] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.681701] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.689514] HS USB OTG: no transceiver configured [ 3.694244] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.702087] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.710083] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.722015] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.729309] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.740814] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.749420] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.761352] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.768676] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.780151] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.787963] HS USB OTG: no transceiver configured [ 3.792663] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.800506] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.808532] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.51 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

stable boot: 18 boots: 17 pass, 1 fail (v3.10.43)

by Kevin's boot bot

Tree/Branch: stable Git describe: v3.10.43 Failed boot tests (console logs at the end) =========================================== da850-evm: FAIL: arm-da8xx_omapl_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 18.3 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 18.2 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 40.6 sec: PASS omap3-beagle-xm 0 min 49.5 sec: PASS legacy,3530beagle 0 min 24.8 sec: PASS omap4-panda 0 min 51.2 sec: PASS omap3-tobi 0 min 22.0 sec: PASS am335x-bone 0 min 23.1 sec: PASS legacy,n900 0 min 16.7 sec: PASS omap4-panda-es 0 min 51.5 sec: PASS legacy,3730storm 0 min 23.5 sec: PASS legacy,3530overo 0 min 20.9 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.0 sec: PASS imx6dl-wandboard,wand-solo 0 min 14.6 sec: PASS arm-exynos_defconfig -------------------- exynos5250-arndale 0 min 30.1 sec: PASS arm-da8xx_omapl_defconfig ------------------------- da850-evm 0 min 13.2 sec: FAIL legacy,da850evm 0 min 13.9 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 14.5 sec: PASS Console logs for failures ========================= arm-da8xx_omapl_defconfig ------------------------- da850-evm: FAIL: last 40 lines of boot log: ------------------------------------------- io scheduler noop registered (default) da8xx_lcdc da8xx_lcdc.0: GLCD: Found Sharp_LK043T1DG01 panel Console: switching to colour frame buffer device 60x34 Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25) is a 16550A serial8250.0: ttyS1 at MMIO 0x1d0c000 (irq = 53) is a 16550A serial8250.0: ttyS2 at MMIO 0x1d0d000 (irq = 61) is a 16550A console [ttyS2] enabled brd: module loaded davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 davinci_mdio davinci_mdio.0: detected phy mask fffffffe libphy: davinci_mdio.0: probed davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio-0:00, driver unknown input: gpio-keys-polled as /devices/platform/gpio-keys-polled.1/input/input0 i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu TCP: cubic registered NET: Registered protocol family 17 deviceless supply cvdd not found, using dummy regulator regulator-dummy: incomplete constraints, leaving on console [netcon0] enabled netconsole: network logging started davinci_emac davinci_emac.1: using random MAC addr: ea:df:48:d5:80:9c VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 Please append a correct "root=" boot option; here are the available partitions: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.43 #1 [<c000cd5c>] (unwind_backtrace+0x0/0xf0) from [<c000b694>] (show_stack+0x10/0x14) [<c000b694>] (show_stack+0x10/0x14) from [<c02a20f4>] (panic+0x8c/0x1dc) [<c02a20f4>] (panic+0x8c/0x1dc) from [<c03a5f24>] (mount_block_root+0x1a0/0x258) [<c03a5f24>] (mount_block_root+0x1a0/0x258) from [<c03a61c8>] (mount_root+0xf0/0x118) [<c03a61c8>] (mount_root+0xf0/0x118) from [<c03a6354>] (prepare_namespace+0x164/0x1c4) [<c03a6354>] (prepare_namespace+0x164/0x1c4) from [<c03a5bac>] (kernel_init_freeable+0x170/0x1b4) [<c03a5bac>] (kernel_init_freeable+0x170/0x1b4) from [<c02a0bbc>] (kernel_init+0x8/0xe4) [<c02a0bbc>] (kernel_init+0x8/0xe4) from [<c0009430>] (ret_from_fork+0x14/0x24) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 13.22 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

mainline boot: 32 passed 9 failed (mainline/v3.15-8884-g2dc24b0)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.02 cubie2 multi_v7_defconfig : FAILED 1:35.46 cubie2 multi_lpae_defconfig : FAILED 1:23.84 omap5uevm omap2plus_defconfig : FAILED 1:45.01 omap5uevm multi_v7_defconfig : FAILED 1:48.84 omap5uevm multi_lpae_defconfig : FAILED 1:44.63 snow multi_v7_defconfig : FAILED 1:13.56 snow multi_lpae_defconfig : FAILED 1:13.63 snowball u8500_defconfig : FAILED 1:51.15 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.49 arndale exynos_defconfig : passed 1:18.97 arndale multi_v7_defconfig : passed 1:42.93 arndale multi_lpae_defconfig : passed 1:21.51 bbb omap2plus_defconfig : passed 1:30.36 bbb multi_v7_defconfig : passed 1:24.86 beaver tegra_defconfig : passed 1:02.63 beaver multi_v7_defconfig : passed 1:07.13 capri bcm_defconfig : passed 0:40.25 capri multi_v7_defconfig : passed 0:40.83 cubie sunxi_defconfig : passed 1:10.65 cubie multi_v7_defconfig : passed 1:42.46 cubox multi_v7_defconfig : passed 1:10.95 dalmore tegra_defconfig : passed 1:30.33 dalmore multi_v7_defconfig : passed 1:23.00 dalmore multi_lpae_defconfig : passed 1:28.37 hummingboard imx_v6_v7_defconfig : passed 1:19.17 hummingboard multi_v7_defconfig : passed 1:15.87 jetson tegra_defconfig : passed 1:02.25 jetson multi_v7_defconfig : passed 1:13.27 jetson multi_lpae_defconfig : passed 1:01.22 panda omap2plus_defconfig : warnings 1:31.33 panda multi_v7_defconfig : warnings 1:59.33 sama5 sama5_defconfig : warnings 1:51.95 seaboard tegra_defconfig : passed 1:19.09 seaboard multi_v7_defconfig : passed 1:05.48 snow exynos_defconfig : passed 1:31.17 snowball multi_v7_defconfig : passed 4:03.75 trimslice tegra_defconfig : passed 1:10.30 trimslice multi_v7_defconfig : passed 1:15.25 wandboard imx_v6_v7_defconfig : passed 1:15.70 wandboard multi_v7_defconfig : passed 1:13.19 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.329126] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338092] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347637] scsi0 : ahci_platform [ 1.351337] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360073] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365725] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373788] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.379996] mmc0: new high speed SDHC card at address aaaa [ 1.385875] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392158] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397722] hub 1-0:1.0: USB hub found [ 1.401959] hub 1-0:1.0: 1 port detected [ 1.406050] mmcblk0: p1 [ 1.410331] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.416016] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.423994] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435406] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442384] hub 2-0:1.0: USB hub found [ 1.446230] hub 2-0:1.0: 1 port detected [ 1.451235] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457927] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465766] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530259] hub 3-0:1.0: USB hub found [ 1.534111] hub 3-0:1.0: 1 port detected [ 1.539117] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545837] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553696] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615228] hub 4-0:1.0: USB hub found [ 1.619065] hub 4-0:1.0: 1 port detected [ 1.623724] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.711287] No MAC Management Counters available [ 1.716061] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722686] IP-Config: Failed to open eth0 [ 1.726810] IP-Config: No network devices available [ 1.731728] vcc3v0: disabling [ 1.734809] ALSA device list: [ 1.737788] No soundcards found. [ 1.741933] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.324213] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333182] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342729] scsi0 : ahci_platform [ 1.346443] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355181] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360835] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368894] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375097] mmc0: new high speed SDHC card at address aaaa [ 1.380979] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387258] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392825] hub 1-0:1.0: USB hub found [ 1.397044] hub 1-0:1.0: 1 port detected [ 1.401139] mmcblk0: p1 [ 1.405454] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411147] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419127] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430490] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437523] hub 2-0:1.0: USB hub found [ 1.441363] hub 2-0:1.0: 1 port detected [ 1.446367] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453055] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460894] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525371] hub 3-0:1.0: USB hub found [ 1.529218] hub 3-0:1.0: 1 port detected [ 1.534236] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.540960] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548798] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610319] hub 4-0:1.0: USB hub found [ 1.614158] hub 4-0:1.0: 1 port detected [ 1.618834] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.706371] No MAC Management Counters available [ 1.711145] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717763] IP-Config: Failed to open eth0 [ 1.721886] IP-Config: No network devices available [ 1.726802] vcc3v0: disabling [ 1.729884] ALSA device list: [ 1.732869] No soundcards found. [ 1.737010] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.994002] mmc0: new high speed SDHC card at address aaaa [ 0.999922] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005932] mmcblk0: p1 [ 1.016196] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023677] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029589] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038562] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047458] scsi0 : ahci_platform [ 1.051100] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059369] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064970] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072844] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096120] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103088] hub 1-0:1.0: USB hub found [ 1.106921] hub 1-0:1.0: 1 port detected [ 1.111400] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117039] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124878] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146110] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152990] hub 2-0:1.0: USB hub found [ 1.156819] hub 2-0:1.0: 1 port detected [ 1.161263] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167942] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175784] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240930] hub 3-0:1.0: USB hub found [ 1.244725] hub 3-0:1.0: 1 port detected [ 1.249242] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255874] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263749] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330950] hub 4-0:1.0: USB hub found [ 1.334736] hub 4-0:1.0: 1 port detected [ 1.339101] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.426140] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442432] No MAC Management Counters available [ 1.447195] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453797] IP-Config: Failed to open eth0 [ 1.457922] IP-Config: No network devices available [ 1.462817] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071578] can: raw protocol (rev 20120528) [ 47.071585] can: broadcast manager protocol (rev 20120528 t) [ 47.071598] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071900] Key type dns_resolver registered [ 47.071979] omap_vc_init_channel: No PMIC info for vdd_core [ 47.071981] omap_vp_init: No PMIC info for vdd_core [ 47.071985] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.071987] omap_vp_init: No PMIC info for vdd_mm [ 47.071991] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.071993] omap_vp_init: No PMIC info for vdd_mpu [ 47.072303] ThumbEE CPU extension supported. [ 47.072318] Registering SWP/SWPB emulation handler [ 47.077455] palmas 0-0048: Irq flag is 0x00000000 [ 47.155251] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.161890] mmc0: new high speed MMC card at address 0001 [ 47.167837] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.172667] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.178955] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.185439] smps123: 600 <--> 1500 mV at 1060 mV [ 47.190732] mmcblk0: unknown partition table [ 47.196081] mmcblk0boot1: unknown partition table [ 47.201115] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206377] mmcblk0boot0: unknown partition table [ 47.212551] smps6: 1200 mV [ 47.216509] smps7: 1800 mV [ 47.220659] smps8: 600 <--> 1310 mV at 1040 mV [ 47.226400] smps9: failed to get the current voltage [ 47.231652] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.243704] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371751] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516757] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.522841] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530284] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537146] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.544862] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558296] ALSA device list: [ 47.561391] No soundcards found. [ 47.565391] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.516560] can: raw protocol (rev 20120528) [ 47.516568] can: broadcast manager protocol (rev 20120528 t) [ 47.516579] can: netlink gateway (rev 20130117) max_hops=1 [ 47.516883] Key type dns_resolver registered [ 47.516964] omap_vc_init_channel: No PMIC info for vdd_core [ 47.516966] omap_vp_init: No PMIC info for vdd_core [ 47.516970] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.516972] omap_vp_init: No PMIC info for vdd_mm [ 47.516975] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.516977] omap_vp_init: No PMIC info for vdd_mpu [ 47.517278] ThumbEE CPU extension supported. [ 47.517293] Registering SWP/SWPB emulation handler [ 47.522436] palmas 0-0048: Irq flag is 0x00000000 [ 47.600212] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.606874] mmc0: new high speed MMC card at address 0001 [ 47.612800] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.617630] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.623899] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.630364] smps123: 600 <--> 1500 mV at 1060 mV [ 47.635657] mmcblk0: unknown partition table [ 47.641001] mmcblk0boot1: unknown partition table [ 47.646036] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651293] mmcblk0boot0: unknown partition table [ 47.657464] smps6: 1200 mV [ 47.661432] smps7: 1800 mV [ 47.665572] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671312] smps9: failed to get the current voltage [ 47.676570] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.688619] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816731] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961741] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.967829] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975278] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982140] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.989862] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003325] ALSA device list: [ 48.006422] No soundcards found. [ 48.010418] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.012799] NET: Registered protocol family 15 [ 2.012969] Key type dns_resolver registered [ 2.013065] omap_vc_init_channel: No PMIC info for vdd_core [ 2.013069] omap_vp_init: No PMIC info for vdd_core [ 2.013080] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.013083] omap_vp_init: No PMIC info for vdd_mm [ 2.013092] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.013095] omap_vp_init: No PMIC info for vdd_mpu [ 2.013644] ThumbEE CPU extension supported. [ 2.013666] Registering SWP/SWPB emulation handler [ 2.013676] SmartReflex Class3 initialized [ 2.043004] palmas 0-0048: Irq flag is 0x00000000 [ 2.121357] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.126440] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.132878] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.141724] mmcblk0: unknown partition table [ 2.148639] mmcblk0boot1: unknown partition table [ 2.155341] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.155494] mmcblk0boot0: unknown partition table [ 2.213099] smps123: 600 <--> 1500 mV at 1060 mV [ 2.220180] smps45: 600 <--> 1310 mV at 1030 mV [ 2.227435] smps6: 1200 mV [ 2.232217] smps7: 1800 mV [ 2.237108] smps8: 600 <--> 1310 mV at 1040 mV [ 2.243545] smps9: failed to get the current voltage [ 2.249512] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.263869] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.272701] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.280471] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.286621] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.295732] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.305109] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.312065] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.320817] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.329529] sr_init: No PMIC hook to init smartreflex [ 2.334988] sr_init: platform driver register failed for SR [ 2.363036] pbias_mmc_omap5: disabling [ 2.368549] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2889.735341] pid_max: default: 32768 minimum: 301 [ 2889.735402] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.735408] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.735677] CPU: Testing write buffer coherency: ok [ 2889.735788] CPU0: update cpu_power 1024 [ 2889.735794] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.735886] Setting up static identity map for 0x4081d0a8 - 0x4081d140 [ 2889.736980] CPU1: Booted secondary processor [ 2889.737016] CPU1: update cpu_power 1024 [ 2889.737020] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.737064] Brought up 2 CPUs [ 2889.737073] SMP: Total of 2 processors activated. [ 2889.737077] CPU: All CPU(s) started in HYP mode. [ 2889.737080] CPU: Virtualization extensions available. [ 2889.737328] devtmpfs: initialized [ 2889.739188] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.739375] pinctrl core: initialized pinctrl subsystem [ 2889.739571] regulator-dummy: no parameters [ 2889.745486] NET: Registered protocol family 16 [ 2889.746367] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.747066] cpuidle: using governor ladder [ 2889.747075] cpuidle: using governor menu [ 2889.752102] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.755942] No ATAGs? [ 2889.755960] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.755965] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.756057] EXYNOS5250 PMU Initialize [ 2889.757259] Serial: AMBA PL011 UART driver [ 2920.594281] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594293] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594587] vbat-supply: no parameters [ 2920.594731] P5.0V_USB3CON: 5000 mV [ 2920.595861] vgaarb: loaded [ 2920.596151] SCSI subsystem initialized [ 2920.596232] libata version 3.00 loaded. [ 2920.596377] usbcore: registered new interface driver usbfs [ 2920.596407] usbcore: registered new interface driver hub [ 2920.596458] usbcore: registered new device driver usb [ 2920.596876] Linux video capture interface~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.696504] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.697050] Console: colour dummy device 80x30 [ 2889.697061] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.697068] pid_max: default: 32768 minimum: 301 [ 2889.697128] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.697134] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.697399] CPU: Testing write buffer coherency: ok [ 2889.697508] CPU0: update cpu_power 1024 [ 2889.697513] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.697608] Setting up static identity map for 0x40815fe0 - 0x40816078 [ 2889.698736] CPU1: Booted secondary processor [ 2889.698768] CPU1: update cpu_power 1024 [ 2889.698771] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.698815] Brought up 2 CPUs [ 2889.698823] SMP: Total of 2 processors activated. [ 2889.698827] CPU: All CPU(s) started in HYP mode. [ 2889.698830] CPU: Virtualization extensions available. [ 2889.699068] devtmpfs: initialized [ 2889.700960] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.701151] pinctrl core: initialized pinctrl subsystem [ 2889.701353] regulator-dummy: no parameters [ 2889.707194] NET: Registered protocol family 16 [ 2889.708082] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.708789] cpuidle: using governor ladder [ 2889.708798] cpuidle: using governor menu [ 2889.713852] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.717704] No ATAGs? [ 2889.717721] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.717726] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.717822] EXYNOS5250 PMU Initialize [ 2889.719025] Serial: AMBA ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.538604] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550506] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.557830] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569305] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.577880] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.589813] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597106] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608612] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616394] HS USB OTG: no transceiver configured [ 3.621124] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.628967] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.636901] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.648834] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656158] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667633] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676177] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688110] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695434] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.706909] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714721] HS USB OTG: no transceiver configured [ 3.719451] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727294] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735229] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747161] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754486] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.765960] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774536] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786437] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.793762] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805236] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813049] HS USB OTG: no transceiver configured [ 3.817749] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825622] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833557] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845458] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852783] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864257] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.872833] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 44 warnings 0 failures (mainline/v3.15-8884-g2dc24b0)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 2dc24b0 Merge tag 'soc2-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-8884-g2dc24b0/ Runtime: 45m 28s Passed: 126 Failed: 0 Warnings: 44 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 32 passed 9 failed (mainline/v3.15-8870-g2840c56)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:23.56 cubie2 multi_v7_defconfig : FAILED 1:37.97 cubie2 multi_lpae_defconfig : FAILED 1:21.87 omap5uevm omap2plus_defconfig : FAILED 1:46.66 omap5uevm multi_v7_defconfig : FAILED 1:48.76 omap5uevm multi_lpae_defconfig : FAILED 1:48.01 snow multi_v7_defconfig : FAILED 1:13.40 snow multi_lpae_defconfig : FAILED 1:13.65 snowball u8500_defconfig : FAILED 1:48.94 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.21 arndale exynos_defconfig : passed 1:16.36 arndale multi_v7_defconfig : passed 1:33.44 arndale multi_lpae_defconfig : passed 1:23.93 bbb omap2plus_defconfig : passed 1:32.83 bbb multi_v7_defconfig : passed 1:32.34 beaver tegra_defconfig : passed 1:06.47 beaver multi_v7_defconfig : passed 1:06.19 capri bcm_defconfig : passed 0:39.29 capri multi_v7_defconfig : passed 0:41.09 cubie sunxi_defconfig : passed 1:19.77 cubie multi_v7_defconfig : passed 1:45.89 cubox multi_v7_defconfig : passed 1:24.67 dalmore tegra_defconfig : passed 1:29.56 dalmore multi_v7_defconfig : passed 1:26.12 dalmore multi_lpae_defconfig : passed 1:19.34 hummingboard imx_v6_v7_defconfig : passed 1:31.22 hummingboard multi_v7_defconfig : passed 1:10.50 jetson tegra_defconfig : passed 1:02.04 jetson multi_v7_defconfig : passed 0:55.86 jetson multi_lpae_defconfig : passed 0:58.53 panda omap2plus_defconfig : warnings 1:39.26 panda multi_v7_defconfig : warnings 1:59.64 sama5 sama5_defconfig : warnings 2:11.37 seaboard tegra_defconfig : passed 1:03.04 seaboard multi_v7_defconfig : passed 1:08.02 snow exynos_defconfig : passed 1:20.24 snowball multi_v7_defconfig : passed 3:12.97 trimslice tegra_defconfig : passed 1:12.70 trimslice multi_v7_defconfig : passed 1:19.38 wandboard imx_v6_v7_defconfig : passed 1:06.90 wandboard multi_v7_defconfig : passed 1:17.33 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.329083] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338048] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347599] scsi0 : ahci_platform [ 1.351305] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360049] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365696] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373763] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.379932] mmc0: new high speed SDHC card at address aaaa [ 1.385813] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392093] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397640] hub 1-0:1.0: USB hub found [ 1.401873] hub 1-0:1.0: 1 port detected [ 1.405963] mmcblk0: p1 [ 1.410252] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.415936] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.423919] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435354] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442323] hub 2-0:1.0: USB hub found [ 1.446178] hub 2-0:1.0: 1 port detected [ 1.451185] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457882] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465726] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530207] hub 3-0:1.0: USB hub found [ 1.534061] hub 3-0:1.0: 1 port detected [ 1.539065] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545784] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553645] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615177] hub 4-0:1.0: USB hub found [ 1.619016] hub 4-0:1.0: 1 port detected [ 1.623689] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.711227] No MAC Management Counters available [ 1.715999] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722636] IP-Config: Failed to open eth0 [ 1.726761] IP-Config: No network devices available [ 1.731679] vcc3v0: disabling [ 1.734760] ALSA device list: [ 1.737740] No soundcards found. [ 1.741883] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.324312] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333281] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342850] scsi0 : ahci_platform [ 1.346559] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355311] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360962] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.369020] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375229] mmc0: new high speed SDHC card at address aaaa [ 1.381101] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387377] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392940] hub 1-0:1.0: USB hub found [ 1.397173] hub 1-0:1.0: 1 port detected [ 1.401268] mmcblk0: p1 [ 1.405650] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411274] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419251] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430584] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437619] hub 2-0:1.0: USB hub found [ 1.441464] hub 2-0:1.0: 1 port detected [ 1.446472] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453158] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460999] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525452] hub 3-0:1.0: USB hub found [ 1.529294] hub 3-0:1.0: 1 port detected [ 1.534324] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.541041] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548886] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610416] hub 4-0:1.0: USB hub found [ 1.614257] hub 4-0:1.0: 1 port detected [ 1.618936] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.706464] No MAC Management Counters available [ 1.711240] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717859] IP-Config: Failed to open eth0 [ 1.721982] IP-Config: No network devices available [ 1.726902] vcc3v0: disabling [ 1.729982] ALSA device list: [ 1.732962] No soundcards found. [ 1.737104] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.994009] mmc0: new high speed SDHC card at address aaaa [ 0.999936] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005940] mmcblk0: p1 [ 1.016205] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023685] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029591] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038563] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047461] scsi0 : ahci_platform [ 1.051107] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059373] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064970] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072841] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096129] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103097] hub 1-0:1.0: USB hub found [ 1.106939] hub 1-0:1.0: 1 port detected [ 1.111410] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117049] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124893] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146121] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.153018] hub 2-0:1.0: USB hub found [ 1.156846] hub 2-0:1.0: 1 port detected [ 1.161298] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167970] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175814] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240943] hub 3-0:1.0: USB hub found [ 1.244743] hub 3-0:1.0: 1 port detected [ 1.249272] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255904] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263778] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330960] hub 4-0:1.0: USB hub found [ 1.334748] hub 4-0:1.0: 1 port detected [ 1.339107] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.426148] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442440] No MAC Management Counters available [ 1.447204] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453798] IP-Config: Failed to open eth0 [ 1.457923] IP-Config: No network devices available [ 1.462822] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071562] can: raw protocol (rev 20120528) [ 47.071570] can: broadcast manager protocol (rev 20120528 t) [ 47.071582] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071881] Key type dns_resolver registered [ 47.071963] omap_vc_init_channel: No PMIC info for vdd_core [ 47.071965] omap_vp_init: No PMIC info for vdd_core [ 47.071969] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.071971] omap_vp_init: No PMIC info for vdd_mm [ 47.071974] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.071976] omap_vp_init: No PMIC info for vdd_mpu [ 47.072289] ThumbEE CPU extension supported. [ 47.072305] Registering SWP/SWPB emulation handler [ 47.077444] palmas 0-0048: Irq flag is 0x00000000 [ 47.155235] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.161866] mmc0: new high speed MMC card at address 0001 [ 47.167810] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.172638] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.178920] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.185376] smps123: 600 <--> 1500 mV at 1060 mV [ 47.190663] mmcblk0: unknown partition table [ 47.196016] mmcblk0boot1: unknown partition table [ 47.201054] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206312] mmcblk0boot0: unknown partition table [ 47.212459] smps6: 1200 mV [ 47.216470] smps7: 1800 mV [ 47.220586] smps8: 600 <--> 1310 mV at 1040 mV [ 47.226324] smps9: failed to get the current voltage [ 47.231572] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.243625] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371727] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516735] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.522821] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530276] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537132] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.544851] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558299] ALSA device list: [ 47.561397] No soundcards found. [ 47.565400] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.516612] can: raw protocol (rev 20120528) [ 47.516620] can: broadcast manager protocol (rev 20120528 t) [ 47.516632] can: netlink gateway (rev 20130117) max_hops=1 [ 47.516934] Key type dns_resolver registered [ 47.517015] omap_vc_init_channel: No PMIC info for vdd_core [ 47.517018] omap_vp_init: No PMIC info for vdd_core [ 47.517021] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.517023] omap_vp_init: No PMIC info for vdd_mm [ 47.517027] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.517028] omap_vp_init: No PMIC info for vdd_mpu [ 47.517341] ThumbEE CPU extension supported. [ 47.517355] Registering SWP/SWPB emulation handler [ 47.522540] palmas 0-0048: Irq flag is 0x00000000 [ 47.600327] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.606953] mmc0: new high speed MMC card at address 0001 [ 47.612882] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.617702] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.623976] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.630619] smps123: 600 <--> 1500 mV at 1060 mV [ 47.635561] mmcblk0: unknown partition table [ 47.641051] mmcblk0boot1: unknown partition table [ 47.646304] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651565] mmcblk0boot0: unknown partition table [ 47.657731] smps6: 1200 mV [ 47.661711] smps7: 1800 mV [ 47.665803] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671561] smps9: failed to get the current voltage [ 47.676819] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.688878] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816815] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961825] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.967917] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975361] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982213] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.989929] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003359] ALSA device list: [ 48.006451] No soundcards found. [ 48.010448] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.012976] NET: Registered protocol family 15 [ 2.013151] Key type dns_resolver registered [ 2.013246] omap_vc_init_channel: No PMIC info for vdd_core [ 2.013250] omap_vp_init: No PMIC info for vdd_core [ 2.013259] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.013262] omap_vp_init: No PMIC info for vdd_mm [ 2.013271] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.013274] omap_vp_init: No PMIC info for vdd_mpu [ 2.013816] ThumbEE CPU extension supported. [ 2.013838] Registering SWP/SWPB emulation handler [ 2.013847] SmartReflex Class3 initialized [ 2.043214] palmas 0-0048: Irq flag is 0x00000000 [ 2.121499] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.126589] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.133026] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.142110] mmcblk0: unknown partition table [ 2.149140] mmcblk0boot1: unknown partition table [ 2.155384] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.156014] mmcblk0boot0: unknown partition table [ 2.213323] smps123: 600 <--> 1500 mV at 1060 mV [ 2.220273] smps45: 600 <--> 1310 mV at 1030 mV [ 2.227557] smps6: 1200 mV [ 2.232339] smps7: 1800 mV [ 2.237200] smps8: 600 <--> 1310 mV at 1040 mV [ 2.243658] smps9: failed to get the current voltage [ 2.249609] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.264013] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.272856] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.280593] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.286743] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.295854] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.305222] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.312174] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.320717] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.329359] sr_init: No PMIC hook to init smartreflex [ 2.334858] sr_init: platform driver register failed for SR [ 2.362951] pbias_mmc_omap5: disabling [ 2.368444] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.720151] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.720684] Console: colour dummy device 80x30 [ 2889.720695] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.720703] pid_max: default: 32768 minimum: 301 [ 2889.720764] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.720769] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.721038] CPU: Testing write buffer coherency: ok [ 2889.721148] CPU0: update cpu_power 1024 [ 2889.721154] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.721245] Setting up static identity map for 0x4081d028 - 0x4081d0c0 [ 2889.722341] CPU1: Booted secondary processor [ 2889.722376] CPU1: update cpu_power 1024 [ 2889.722379] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.722424] Brought up 2 CPUs [ 2889.722433] SMP: Total of 2 processors activated. [ 2889.722437] CPU: All CPU(s) started in HYP mode. [ 2889.722440] CPU: Virtualization extensions available. [ 2889.722685] devtmpfs: initialized [ 2889.724536] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.724726] pinctrl core: initialized pinctrl subsystem [ 2889.724927] regulator-dummy: no parameters [ 2889.730843] NET: Registered protocol family 16 [ 2889.731726] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.732432] cpuidle: using governor ladder [ 2889.732441] cpuidle: using governor menu [ 2889.737481] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.741322] No ATAGs? [ 2889.741340] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.741345] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.741442] EXYNOS5250 PMU Initialize [ 2889.742646] Serial: AMBA PL011 UART driver [ 2920.594283] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594296] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594590] vbat-supply: no parameters [ 2920.594735] P5.0V_USB3CON: 5000 mV [ 2920.595862~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.787739] CPU1: update cpu_power 1024 [ 2889.787742] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.787785] Brought up 2 CPUs [ 2889.787793] SMP: Total of 2 processors activated. [ 2889.787797] CPU: All CPU(s) started in HYP mode. [ 2889.787801] CPU: Virtualization extensions available. [ 2889.788046] devtmpfs: initialized [ 2889.789950] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.790135] pinctrl core: initialized pinctrl subsystem [ 2889.790335] regulator-dummy: no parameters [ 2889.796184] NET: Registered protocol family 16 [ 2889.797053] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.797758] cpuidle: using governor ladder [ 2889.797766] cpuidle: using governor menu [ 2889.802806] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.806649] No ATAGs? [ 2889.806667] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.806672] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.806769] EXYNOS5250 PMU Initialize [ 2889.807966] Serial: AMBA PL011 UART driver [ 2920.594305] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594317] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594613] vbat-supply: no parameters [ 2920.594755] P5.0V_USB3CON: 5000 mV [ 2920.595891] vgaarb: loaded [ 2920.596177] SCSI subsystem initialized [ 2920.596258] libata version 3.00 loaded. [ 2920.596401] usbcore: registered new interface driver usbfs [ 2920.596430] usbcore: registered new interface driver hub [ 2920.596482] usbcore: registered new device driver usb [ 2920.596896] Linux video capture interface: v2.00 [ 2920.596918] pps_core: LinuxPPS API ver. 1 registered [ 2920.596922] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596937] PTP clock support registered [ 2920.596977] EDAC MC: Ver: 3.0.0 [ 2920.597321] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597775] Switched to clocksource arch_sys_counter [ 2920.602052] NET: Registered protocol family 2 [ 2920.602255] TCP estab~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.538574] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550506] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.557830] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569305] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.577880] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.589813] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597137] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608612] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616424] HS USB OTG: no transceiver configured [ 3.621124] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.628967] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.636901] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.648834] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656158] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667633] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676177] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688110] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695434] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.706909] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714721] HS USB OTG: no transceiver configured [ 3.719421] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727294] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735229] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747161] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754455] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.765960] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774505] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786437] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.793762] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805236] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813049] HS USB OTG: no transceiver configured [ 3.817749] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825622] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833557] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845458] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852783] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864257] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.872833] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 44 warnings 0 failures (mainline/v3.15-8870-g2840c56)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 2840c56 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-8870-g2840c56/ Runtime: 46m 8s Passed: 126 Failed: 0 Warnings: 44 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports