Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

queue build: 17 warnings 0 failures (queue/v3.12.22)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: fe7b290 Linux 3.12.22 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.22/ Runtime: 34m 18s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 5 months

mainline boot: 23 passed 18 failed (mainline/v3.15-11940-g6391f34)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:27.32 capri bcm_defconfig : FAILED 1:23.83 capri multi_v7_defconfig : FAILED 1:24.99 cubox multi_v7_defconfig : FAILED 1:38.90 dalmore multi_v7_defconfig : FAILED 1:35.76 dalmore multi_lpae_defconfig : FAILED 1:30.73 hummingboard multi_v7_defconfig : FAILED 1:29.30 jetson multi_v7_defconfig : FAILED 1:30.53 jetson multi_lpae_defconfig : FAILED 1:26.79 omap5uevm omap2plus_defconfig : FAILED 1:43.86 omap5uevm multi_v7_defconfig : FAILED 1:56.56 omap5uevm multi_lpae_defconfig : FAILED 1:51.94 sama5 sama5_defconfig : FAILED 3:00.50 seaboard multi_v7_defconfig : FAILED 0:39.24 snow multi_v7_defconfig : FAILED 1:13.34 snow multi_lpae_defconfig : FAILED 1:13.88 snowball u8500_defconfig : FAILED 1:44.79 wandboard multi_v7_defconfig : FAILED 1:44.19 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.96 arndale exynos_defconfig : passed 1:19.92 arndale multi_v7_defconfig : passed 1:38.29 arndale multi_lpae_defconfig : passed 1:27.22 bbb omap2plus_defconfig : passed 1:28.55 bbb multi_v7_defconfig : passed 1:20.84 beaver tegra_defconfig : passed 0:53.68 cubie sunxi_defconfig : passed 1:19.07 cubie multi_v7_defconfig : passed 1:16.46 cubie2 sunxi_defconfig : passed 1:10.87 cubie2 multi_v7_defconfig : passed 1:29.41 cubie2 multi_lpae_defconfig : passed 1:22.14 dalmore tegra_defconfig : passed 1:18.52 hummingboard imx_v6_v7_defconfig : passed 1:26.58 jetson tegra_defconfig : passed 2:04.87 panda omap2plus_defconfig : warnings 1:37.66 panda multi_v7_defconfig : warnings 1:53.60 seaboard tegra_defconfig : passed 1:00.61 snow exynos_defconfig : passed 1:32.17 snowball multi_v7_defconfig : passed 5:12.93 trimslice tegra_defconfig : passed 3:56.01 trimslice multi_v7_defconfig : passed 3:48.65 wandboard imx_v6_v7_defconfig : passed 1:07.97 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.565595] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.571689] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.576654] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.582747] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.590497] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.597609] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.603208] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.609590] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.619588] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.629943] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.636572] [drm] No driver support for vblank timestamp query. [ 3.642515] host1x drm: No connectors reported connected with modes [ 3.648779] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.671759] Console: switching to colour frame buffer device 128x48 [ 3.683527] host1x drm: fb0: frame buffer device [ 3.688223] host1x drm: registered panic notifier [ 3.698604] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.704869] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.712310] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.723795] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.729201] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.737009] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.748211] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.754562] hub 1-0:1.0: USB hub found [ 3.758339] hub 1-0:1.0: 1 port detected [ 3.762710] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.768123] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.775873] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.788591] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.794882] hub 2-0:1.0: USB hub found [ 3.798652] hub 2-0:1.0: 1 port detected [ 3.806614] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.819409] usb1_vbus: disabling [ 3.822810] ALSA device list: [ 3.825806] #0: NVIDIA Tegra Beaver [ 3.830081] Waiting for root device /dev/mmcblk0p1... [ 4.108618] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.572490] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.225624] hub 2-0:1.0: 1 port detected [ 1.229997] SPEAr-ehci: EHCI SPEAr driver [ 1.234102] tegra-ehci: Tegra EHCI driver [ 1.238232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244413] ohci-pci: OHCI PCI platform driver [ 1.248921] ohci-platform: OHCI generic platform driver [ 1.254234] ohci-omap3: OHCI OMAP3 driver [ 1.258332] SPEAr-ohci: OHCI SPEAr driver [ 1.263073] usbcore: registered new interface driver usb-storage [ 1.270626] mousedev: PS/2 mouse device common for all mice [ 1.277635] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.286983] i2c /dev entries driver [ 1.293319] usbcore: registered new interface driver uvcvideo [ 1.299067] USB Video Class driver (1.1.1) [ 1.303164] gspca_main: v2.14.0 registered [ 1.310469] orion_wdt: Initial timeout 25 sec [ 1.315909] sdhci: Secure Digital Host Controller Interface driver [ 1.322078] sdhci: Copyright(c) Pierre Ossman [ 1.326998] Synopsys Designware Multimedia Card Interface Driver [ 1.333680] usbcore: registered new interface driver usbhid [ 1.339244] usbhid: USB HID core driver [ 1.347184] TCP: cubic registered [ 1.350528] NET: Registered protocol family 17 [ 1.354985] can: controller area network core (rev 20120528 abi 9) [ 1.361216] NET: Registered protocol family 29 [ 1.365651] can: raw protocol (rev 20120528) [ 1.369917] can: broadcast manager protocol (rev 20120528 t) [ 1.375578] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381452] Key type dns_resolver registered [ 1.385931] ThumbEE CPU extension supported. [ 1.390212] Registering SWP/SWPB emulation handler [ 1.395002] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399713] ata1: SATA link down (SStatus 0 SControl F300) [ 1.406186] USB Power: 5000 mV [ 1.409718] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-14 08:15:46 UTC (1402733746) [ 1.420287] ALSA device list: [ 1.423243] No soundcards found. [ 1.427169] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.970246] i2c 0-004c: Driver lm90 requests probe deferral [ 2.977664] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.983270] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.993185] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.999657] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.009999] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.015618] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.025595] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.041763] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.051185] hub 1-0:1.0: USB hub found [ 3.055263] hub 1-0:1.0: 1 port detected [ 3.061444] i2c 0-004c: Driver lm90 requests probe deferral [ 3.068782] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.074391] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.084303] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.090767] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.102247] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.110403] i2c 0-004c: Driver lm90 requests probe deferral [ 3.118270] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.118307] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.156172] VDD_5V0_HDMI_CON: disabling [ 3.156218] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.167129] vdd_cam_1v8_reg: disabling [ 3.171169] vdd_hdmi_5v0: disabling [ 3.174822] usb1_vbus: disabling [ 3.178126] dvdd_ts: disabling [ 3.186076] ALSA device list: [ 3.189175] #0: NVIDIA Tegra Dalmore [ 3.195365] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.201867] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.209709] Waiting for root device /dev/mmcblk0p1... [ 3.377139] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.861339] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.872780] i2c 0-004c: Driver lm90 requests probe deferral [ 3.880380] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.886019] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.895942] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.902425] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.964579] i2c 0-004c: Driver lm90 requests probe deferral [ 2.971671] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.977192] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.986614] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.992974] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.003006] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.008558] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.019228] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.031834] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.041649] hub 1-0:1.0: USB hub found [ 3.045635] hub 1-0:1.0: 1 port detected [ 3.051940] i2c 0-004c: Driver lm90 requests probe deferral [ 3.059319] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.064915] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.074762] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.081226] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.092830] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.100981] i2c 0-004c: Driver lm90 requests probe deferral [ 3.106701] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.145377] VDD_5V0_HDMI_CON: disabling [ 3.149352] vdd_cam_1v8_reg: disabling [ 3.153531] vdd_hdmi_5v0: disabling [ 3.157247] usb1_vbus: disabling [ 3.160539] dvdd_ts: disabling [ 3.167931] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.168609] ALSA device list: [ 3.168624] #0: NVIDIA Tegra Dalmore [ 3.180375] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.183315] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.183556] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.203430] Waiting for root device /dev/mmcblk0p1... [ 3.357076] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.836312] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.847922] i2c 0-004c: Driver lm90 requests probe deferral [ 3.855338] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.860934] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.870624] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.877005] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031433] usbcore: registered new interface driver usb-storage [ 1.042550] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047765] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052707] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065192] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071387] hub 1-0:1.0: USB hub found [ 1.075201] hub 1-0:1.0: 1 port detected [ 1.082878] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.087984] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.092907] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105205] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111346] hub 2-0:1.0: USB hub found [ 1.115149] hub 2-0:1.0: 1 port detected [ 1.119930] mousedev: PS/2 mouse device common for all mice [ 1.128205] i2c /dev entries driver [ 1.132950] usbcore: registered new interface driver uvcvideo [ 1.138730] USB Video Class driver (1.1.1) [ 1.142858] gspca_main: v2.14.0 registered [ 1.149592] sdhci: Secure Digital Host Controller Interface driver [ 1.155807] sdhci: Copyright(c) Pierre Ossman [ 1.161010] Synopsys Designware Multimedia Card Interface Driver [ 1.167959] usbcore: registered new interface driver usbhid [ 1.173561] usbhid: USB HID core driver [ 1.181756] TCP: cubic registered [ 1.185094] NET: Registered protocol family 17 [ 1.189593] can: controller area network core (rev 20120528 abi 9) [ 1.195857] NET: Registered protocol family 29 [ 1.200335] can: raw protocol (rev 20120528) [ 1.204618] can: broadcast manager protocol (rev 20120528 t) [ 1.210308] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216186] Key type dns_resolver registered [ 1.220638] ThumbEE CPU extension supported. [ 1.224939] Registering SWP/SWPB emulation handler [ 1.230926] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.245968] ALSA device list: [ 1.248952] No soundcards found. [ 1.253064] Waiting for root device /dev/mmcblk0p2... [ 60.325318] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.068029] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.076251] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.085824] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.092011] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.100167] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.105623] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.113370] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.126940] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.133807] hub 2-0:1.0: USB hub found [ 2.137654] hub 2-0:1.0: 1 port detected [ 2.142424] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.146949] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.154506] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.162731] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.172378] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.178574] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.186856] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.194313] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.198912] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.198939] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.215150] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.215211] +5V_HDMI_CON: disabling [ 2.215220] +USB0_VBUS_SW: disabling [ 2.215225] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.215642] ALSA device list: [ 2.215647] #0: NVIDIA Tegra Jetson TK1 [ 2.242130] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.243434] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.243519] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.264666] Waiting for root device /dev/mmcblk0p1... [ 2.451978] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.914827] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.925923] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.930475] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.937978] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.946172] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.955650] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.961823] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.063382] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.071607] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.081178] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.087374] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.095542] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.101006] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.108765] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.122121] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.128992] hub 2-0:1.0: USB hub found [ 2.132841] hub 2-0:1.0: 1 port detected [ 2.137597] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.142132] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.149695] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.157922] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.167564] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.173765] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.182152] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.189630] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.194263] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.194289] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:23 UTC (949363223) [ 2.210511] +5V_HDMI_CON: disabling [ 2.210517] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.210548] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.230867] +USB0_VBUS_SW: disabling [ 2.234482] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.239205] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.239466] ALSA device list: [ 2.239471] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.257279] Waiting for root device /dev/mmcblk0p1... [ 2.447156] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.909861] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.920968] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.925521] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.933026] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.941220] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.950690] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.956844] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071435] can: raw protocol (rev 20120528) [ 47.071441] can: broadcast manager protocol (rev 20120528 t) [ 47.071450] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071758] Key type dns_resolver registered [ 47.071841] omap_vc_init_channel: No PMIC info for vdd_core [ 47.071843] omap_vp_init: No PMIC info for vdd_core [ 47.071846] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.071848] omap_vp_init: No PMIC info for vdd_mm [ 47.071852] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.071854] omap_vp_init: No PMIC info for vdd_mpu [ 47.072163] ThumbEE CPU extension supported. [ 47.072179] Registering SWP/SWPB emulation handler [ 47.077502] palmas 0-0048: Irq flag is 0x00000000 [ 47.148711] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.149553] mmc0: new high speed MMC card at address 0001 [ 47.149813] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.151613] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.156609] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.157188] mmcblk0: unknown partition table [ 47.157966] mmcblk0boot1: unknown partition table [ 47.158715] mmcblk0boot0: unknown partition table [ 47.193522] smps123: 600 <--> 1500 mV at 1060 mV [ 47.199653] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206044] smps6: 1200 mV [ 47.210012] smps7: 1800 mV [ 47.214118] smps8: 600 <--> 1310 mV at 1040 mV [ 47.219859] smps9: failed to get the current voltage [ 47.225111] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.237171] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.361790] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.506799] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.512879] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.520313] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.527173] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.534884] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.548345] ALSA device list: [ 47.551441] No soundcards found. [ 47.555443] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.522527] TCP: cubic registered [ 47.522535] NET: Registered protocol family 17 [ 47.522550] can: controller area network core (rev 20120528 abi 9) [ 47.522599] NET: Registered protocol family 29 [ 47.522606] can: raw protocol (rev 20120528) [ 47.522612] can: broadcast manager protocol (rev 20120528 t) [ 47.522621] can: netlink gateway (rev 20130117) max_hops=1 [ 47.522905] Key type dns_resolver registered [ 47.522983] omap_vc_init_channel: No PMIC info for vdd_core [ 47.522985] omap_vp_init: No PMIC info for vdd_core [ 47.522989] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.522991] omap_vp_init: No PMIC info for vdd_mm [ 47.522994] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.522996] omap_vp_init: No PMIC info for vdd_mpu [ 47.523311] ThumbEE CPU extension supported. [ 47.523326] Registering SWP/SWPB emulation handler [ 47.532514] palmas 0-0048: Irq flag is 0x00000000 [ 47.614836] mmcblk0: unknown partition table [ 47.620178] mmcblk0boot1: unknown partition table [ 47.625968] mmcblk0boot0: unknown partition table [ 47.631137] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.638739] smps123: 600 <--> 1500 mV at 1060 mV [ 47.644879] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651299] smps6: 1200 mV [ 47.655290] smps7: 1800 mV [ 47.659426] smps8: 600 <--> 1310 mV at 1040 mV [ 47.665157] smps9: failed to get the current voltage [ 47.670401] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.682446] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.806796] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.814722] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.820807] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.828259] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.835113] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.842818] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.856239] ALSA device list: [ 47.859348] No soundcards found. [ 47.863363] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.951131] Key type dns_resolver registered [ 1.951248] omap_vc_init_channel: No PMIC info for vdd_core [ 1.951251] omap_vp_init: No PMIC info for vdd_core [ 1.951261] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.951264] omap_vp_init: No PMIC info for vdd_mm [ 1.951273] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.951275] omap_vp_init: No PMIC info for vdd_mpu [ 1.951842] ThumbEE CPU extension supported. [ 1.951867] Registering SWP/SWPB emulation handler [ 1.951879] SmartReflex Class3 initialized [ 1.973460] palmas 0-0048: Irq flag is 0x00000000 [ 2.033965] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.034217] mmc0: new high speed MMC card at address 0001 [ 2.039980] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.040222] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.040423] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.043216] mmcblk0: unknown partition table [ 2.045301] mmcblk0boot1: unknown partition table [ 2.047269] mmcblk0boot0: unknown partition table [ 2.123587] smps123: 600 <--> 1500 mV at 1060 mV [ 2.130734] smps45: 600 <--> 1310 mV at 1030 mV [ 2.138078] smps6: 1200 mV [ 2.142808] smps7: 1800 mV [ 2.147700] smps8: 600 <--> 1310 mV at 1040 mV [ 2.154175] smps9: failed to get the current voltage [ 2.160122] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.174469] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.183306] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191152] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.197258] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.206390] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.215788] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.222780] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.231379] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.240071] sr_init: No PMIC hook to init smartreflex [ 2.245534] sr_init: platform driver register failed for SR [ 2.273749] pbias_mmc_omap5: disabling [ 2.279257] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[708]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3020 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.120639] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.127261] hub 3-0:1.0: USB hub found [ 2.131064] hub 3-0:1.0: 1 port detected [ 2.136084] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.143110] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-14 08:16:38 UTC (1402733798) [ 2.155677] vdd_1v2: disabling [ 2.158895] vdd_1v5: disabling [ 2.222004] ALSA device list: [ 2.224965] #0: NVIDIA Tegra Seaboard [ 2.229443] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.237203] Please append a correct "root=" boot option; here are the available partitions: [ 2.245557] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.253807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-11940-g6391f34 #1 [ 2.261042] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.268781] [<c0211c68>] (show_stack) from [<c0810f84>] (dump_stack+0x88/0x98) [ 2.275993] [<c0810f84>] (dump_stack) from [<c080ddd4>] (panic+0xa0/0x218) [ 2.282863] [<c080ddd4>] (panic) from [<c0ad60b0>] (mount_block_root+0x1a0/0x230) [ 2.290335] [<c0ad60b0>] (mount_block_root) from [<c0ad6248>] (mount_root+0x108/0x110) [ 2.298239] [<c0ad6248>] (mount_root) from [<c0ad63a8>] (prepare_namespace+0x158/0x1a0) [ 2.306230] [<c0ad63a8>] (prepare_namespace) from [<c0ad5d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.315087] [<c0ad5d6c>] (kernel_init_freeable) from [<c080c0cc>] (kernel_init+0x8/0xf0) [ 2.323165] [<c080c0cc>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.330721] CPU1: stopping [ 2.333424] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-11940-g6391f34 #1 [ 2.340643] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.348378] [<c0211c68>] (show_stack) from [<c0810f84>] (dump_stack+0x88/0x98) [ 2.355589] [<c0810f84>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.362973] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.370529] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.377994] Exception stack(0xea087f68 to 0xea087fb0) [ 2.383035] 7f60: 00000000 c0bbdf94 c0bbdf94 0000004c 8ae11da8 00000000 [ 2.391197] 7f80: 8ae2cb58 00000000 eafb6db0 ea086000 00000000 c081e054 00000015 ea087fb0 [ 2.399356] 7fa0: c06b2fe0 c06b2fec 60000113 ffffffff [ 2.404404] [<c02127c0>] (__irq_svc) from [<c06b2fec>] (cpuidle_enter_state+0x68/0x100) [ 2.412402] [<c06b2fec>] (cpuidle_enter_state) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.421173] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.427946] drm_kms_helper: panic occurred, switching back to text console [ 2.434828] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521744 [ 0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998952K/2093056K available (6459K kernel code, 891K rwdata, 2576K rodata, 664K init, 307K bss, 94104K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0adb1ac (9037 kB) [ 0.000000] .init : 0xc0adc000 - 0xc0b82100 ( 665 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c62dc0 ( 892 kB) [ 0.000000] .bss : 0xc0c62dc8 - 0xc0cafd08 ( 308 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.600037] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.600572] Console: colour dummy device 80x30 [ 2889.600584] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.600592] pid_max: default: 32768 minimum: 301 [ 2889.600654] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.600659] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.600930] CPU: Testing write buffer coherency: ok [ 2889.601041] CPU0: update cpu_capacity 1024 [ 2889.601046] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.601143] Setting up static identity map for 0x4081d998 - 0x4081da30 [ 2889.602234] CPU1: Booted secondary processor [ 2889.~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000006] Switching to timer-based delay loop [ 2889.730105] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.730651] Console: colour dummy device 80x30 [ 2889.730662] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.730669] pid_max: default: 32768 minimum: 301 [ 2889.730731] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.730736] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.731006] CPU: Testing write buffer coherency: ok [ 2889.731118] CPU0: update cpu_capacity 1024 [ 2889.731124] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.731220] Setting up static identity map for 0x40816a08 - 0x40816aa0 [ 2889.732315] CPU1: Booted secondary processor [ 2889.732348] CPU1: update cpu_capacity 1024 [ 2889.732351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.732396] Brought up 2 CPUs [ 2889.732405] SMP: Total of 2 processors activated. [ 2889.732408] CPU: All CPU(s) started in HYP mode. [ 2889.732412] CPU: Virtualization extensions available. [ 2889.732655] devtmpfs: initialized [ 2889.734577] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.734778] pinctrl core: initialized pinctrl subsystem [ 2889.734979] regulator-dummy: no parameters [ 2889.740879] NET: Registered protocol family 16 [ 2889.741765] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.742485] cpuidle: using governor ladder [ 2889.742492] cpuidle: using governor menu [ 2889.747546] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.751408] No ATAGs? [ 2889.751427] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.751432] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.751525] EXYNOS5250 PMU Initialize [ 2889.752739] Serial: AMBA PL011 UART driver [ 2920.594304] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594315] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594607] vbat-supply: no parameters [ 2920.594743] P5.0V_USB3CON: 5000 mV [ 2920.595896] vgaarb: loaded [ 2920.596178] SCSI subsystem initialized [ 2920.596259~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.637359] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.645294] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.657226] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.664550] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.676025] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.684539] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.696472] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.703765] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.715270] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.723083] HS USB OTG: no transceiver configured [ 3.727783] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.735626] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.743530] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755462] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.762786] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774261] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.782775] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794677] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802001] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813476] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821289] HS USB OTG: no transceiver configured [ 3.825988] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.833862] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.841766] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853698] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.860992] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872467] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881011] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.892913] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.900238] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911712] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919525] HS USB OTG: no transceiver configured [ 3.924224] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932098] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940002] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.951904] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.959228] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970703] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070051] ohci-platform: OHCI generic platform driver [ 1.075444] ohci-omap3: OHCI OMAP3 driver [ 1.079608] SPEAr-ohci: OHCI SPEAr driver [ 1.084441] usbcore: registered new interface driver usb-storage [ 1.095466] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100550] ci_hdrc ci_hdrc.0: no supported roles [ 1.105382] 2184200.usb supply vbus not found, using dummy regulator [ 1.115483] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120570] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125488] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.142728] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.148918] hub 1-0:1.0: USB hub found [ 1.152723] hub 1-0:1.0: 1 port detected [ 1.157426] mousedev: PS/2 mouse device common for all mice [ 1.165566] i2c /dev entries driver [ 1.170278] usbcore: registered new interface driver uvcvideo [ 1.176057] USB Video Class driver (1.1.1) [ 1.180186] gspca_main: v2.14.0 registered [ 1.186880] sdhci: Secure Digital Host Controller Interface driver [ 1.193087] sdhci: Copyright(c) Pierre Ossman [ 1.198298] Synopsys Designware Multimedia Card Interface Driver [ 1.205209] usbcore: registered new interface driver usbhid [ 1.210809] usbhid: USB HID core driver [ 1.218637] TCP: cubic registered [ 1.221973] NET: Registered protocol family 17 [ 1.226465] can: controller area network core (rev 20120528 abi 9) [ 1.232735] NET: Registered protocol family 29 [ 1.237195] can: raw protocol (rev 20120528) [ 1.241492] can: broadcast manager protocol (rev 20120528 t) [ 1.247183] can: netlink gateway (rev 20130117) max_hops=1 [ 1.253082] Key type dns_resolver registered [ 1.257858] ThumbEE CPU extension supported. [ 1.262159] Registering SWP/SWPB emulation handler [ 1.268201] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.283250] ALSA device list: [ 1.286234] No soundcards found. [ 1.290215] Waiting for root device /dev/mmcblk0p2... [ 60.323238] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

11 years, 5 months

next boot: 28 passed 12 failed (next/next-20140613)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:27.76 capri bcm_defconfig : FAILED 1:24.72 capri multi_v7_defconfig : FAILED 1:24.69 cubox multi_v7_defconfig : FAILED 1:31.86 dalmore multi_v7_defconfig : FAILED 1:34.12 dalmore multi_lpae_defconfig : FAILED 1:30.63 hummingboard multi_v7_defconfig : FAILED 1:26.67 jetson multi_v7_defconfig : FAILED 1:25.80 sama5 sama5_defconfig : FAILED 3:02.07 seaboard multi_v7_defconfig : FAILED 0:37.64 snowball u8500_defconfig : FAILED 1:51.66 wandboard multi_v7_defconfig : FAILED 1:37.87 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.95 arndale exynos_defconfig : passed 1:22.04 arndale multi_v7_defconfig : passed 1:37.71 arndale multi_lpae_defconfig : passed 1:29.27 bbb omap2plus_defconfig : passed 1:29.14 bbb multi_v7_defconfig : passed 1:28.83 beaver tegra_defconfig : passed 1:02.29 cubie sunxi_defconfig : passed 1:10.41 cubie multi_v7_defconfig : passed 1:18.97 cubie2 sunxi_defconfig : passed 1:27.59 cubie2 multi_v7_defconfig : passed 1:22.92 cubie2 multi_lpae_defconfig : passed 1:05.51 dalmore tegra_defconfig : passed 1:23.02 hummingboard imx_v6_v7_defconfig : passed 1:32.93 jetson tegra_defconfig : passed 3:53.79 omap5uevm omap2plus_defconfig : warnings 1:00.71 omap5uevm multi_v7_defconfig : warnings 2:00.02 omap5uevm multi_lpae_defconfig : warnings 1:54.77 panda omap2plus_defconfig : warnings 1:35.42 panda multi_v7_defconfig : warnings 1:52.54 seaboard tegra_defconfig : passed 1:06.00 snow exynos_defconfig : passed 0:58.92 snow multi_v7_defconfig : passed 1:00.19 snow multi_lpae_defconfig : passed 1:00.42 snowball multi_v7_defconfig : passed 5:09.07 trimslice tegra_defconfig : passed 3:59.24 trimslice multi_v7_defconfig : passed 3:59.44 wandboard imx_v6_v7_defconfig : passed 1:10.61 Offline boards: jetson multi_lpae_defconfig : OFFLINE 1:42.97 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.571477] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.577564] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.582522] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.588608] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.596351] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.603451] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.609041] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.615396] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.625393] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.635860] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.642492] [drm] No driver support for vblank timestamp query. [ 3.648442] host1x drm: No connectors reported connected with modes [ 3.654706] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.678258] Console: switching to colour frame buffer device 128x48 [ 3.689978] host1x drm: fb0: frame buffer device [ 3.694675] host1x drm: registered panic notifier [ 3.713606] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.719881] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.727334] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.738821] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.744227] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.752038] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.763212] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.769566] hub 1-0:1.0: USB hub found [ 3.773343] hub 1-0:1.0: 1 port detected [ 3.777708] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.783120] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.790851] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.803596] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.809892] hub 2-0:1.0: USB hub found [ 3.813664] hub 2-0:1.0: 1 port detected [ 3.821549] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.834381] usb1_vbus: disabling [ 3.837786] ALSA device list: [ 3.840768] #0: NVIDIA Tegra Beaver [ 3.845001] Waiting for root device /dev/mmcblk0p1... [ 4.123622] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.592341] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.226254] hub 2-0:1.0: 1 port detected [ 1.230627] SPEAr-ehci: EHCI SPEAr driver [ 1.234739] tegra-ehci: Tegra EHCI driver [ 1.238868] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.245050] ohci-pci: OHCI PCI platform driver [ 1.249558] ohci-platform: OHCI generic platform driver [ 1.254881] ohci-omap3: OHCI OMAP3 driver [ 1.258986] SPEAr-ohci: OHCI SPEAr driver [ 1.263734] usbcore: registered new interface driver usb-storage [ 1.271291] mousedev: PS/2 mouse device common for all mice [ 1.278310] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287666] i2c /dev entries driver [ 1.293127] usbcore: registered new interface driver uvcvideo [ 1.298883] USB Video Class driver (1.1.1) [ 1.302974] gspca_main: v2.14.0 registered [ 1.310224] orion_wdt: Initial timeout 25 sec [ 1.315736] sdhci: Secure Digital Host Controller Interface driver [ 1.321900] sdhci: Copyright(c) Pierre Ossman [ 1.326814] Synopsys Designware Multimedia Card Interface Driver [ 1.333502] usbcore: registered new interface driver usbhid [ 1.339059] usbhid: USB HID core driver [ 1.346891] TCP: cubic registered [ 1.350197] NET: Registered protocol family 17 [ 1.354668] can: controller area network core (rev 20120528 abi 9) [ 1.360909] NET: Registered protocol family 29 [ 1.365333] can: raw protocol (rev 20120528) [ 1.369596] can: broadcast manager protocol (rev 20120528 t) [ 1.375250] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381126] Key type dns_resolver registered [ 1.385607] ThumbEE CPU extension supported. [ 1.389875] Registering SWP/SWPB emulation handler [ 1.394665] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399367] ata1: SATA link down (SStatus 0 SControl F300) [ 1.405875] USB Power: 5000 mV [ 1.409401] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-14 07:27:30 UTC (1402730850) [ 1.419930] ALSA device list: [ 1.422908] No soundcards found. [ 1.426833] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.965488] i2c 0-004c: Driver lm90 requests probe deferral [ 2.972987] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.978591] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.988574] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.995033] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.005275] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.010889] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.020888] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.036865] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.046734] hub 1-0:1.0: USB hub found [ 3.050732] hub 1-0:1.0: 1 port detected [ 3.057251] i2c 0-004c: Driver lm90 requests probe deferral [ 3.064792] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.070426] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.080402] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.086911] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.099035] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.107220] i2c 0-004c: Driver lm90 requests probe deferral [ 3.112930] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.151151] VDD_5V0_HDMI_CON: disabling [ 3.155168] vdd_cam_1v8_reg: disabling [ 3.159551] vdd_hdmi_5v0: disabling [ 3.163253] usb1_vbus: disabling [ 3.166638] dvdd_ts: disabling [ 3.173955] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.174636] ALSA device list: [ 3.174652] #0: NVIDIA Tegra Dalmore [ 3.186450] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.189422] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.189657] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.209314] Waiting for root device /dev/mmcblk0p1... [ 3.366948] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.850479] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.862032] i2c 0-004c: Driver lm90 requests probe deferral [ 3.869556] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.875195] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.885002] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.891471] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.962119] i2c 0-004c: Driver lm90 requests probe deferral [ 2.969450] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.975048] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.984869] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.991333] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.001771] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.007367] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.016555] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.032203] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.042043] hub 1-0:1.0: USB hub found [ 3.046040] hub 1-0:1.0: 1 port detected [ 3.052469] i2c 0-004c: Driver lm90 requests probe deferral [ 3.060019] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.065653] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.075725] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.082237] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.094311] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.102528] i2c 0-004c: Driver lm90 requests probe deferral [ 3.108235] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.147170] VDD_5V0_HDMI_CON: disabling [ 3.151081] vdd_cam_1v8_reg: disabling [ 3.155312] vdd_hdmi_5v0: disabling [ 3.158981] usb1_vbus: disabling [ 3.162289] dvdd_ts: disabling [ 3.169753] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.170423] ALSA device list: [ 3.170439] #0: NVIDIA Tegra Dalmore [ 3.182167] platfodsi requests probe deferral [ 3.187083] Waiting for root device /dev/mmcblk0p1... [ 3.189468] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.189703] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.362292] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.845677] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.857339] i2c 0-004c: Driver lm90 requests probe deferral [ 3.864827] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.870461] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.880335] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.886809] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031197] usbcore: registered new interface driver usb-storage [ 1.042337] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047549] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052496] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.064989] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071184] hub 1-0:1.0: USB hub found [ 1.074996] hub 1-0:1.0: 1 port detected [ 1.082655] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.087758] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.092680] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.104997] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111139] hub 2-0:1.0: USB hub found [ 1.114934] hub 2-0:1.0: 1 port detected [ 1.119685] mousedev: PS/2 mouse device common for all mice [ 1.127982] i2c /dev entries driver [ 1.132673] usbcore: registered new interface driver uvcvideo [ 1.138449] USB Video Class driver (1.1.1) [ 1.142570] gspca_main: v2.14.0 registered [ 1.149292] sdhci: Secure Digital Host Controller Interface driver [ 1.155505] sdhci: Copyright(c) Pierre Ossman [ 1.160702] Synopsys Designware Multimedia Card Interface Driver [ 1.167673] usbcore: registered new interface driver usbhid [ 1.173274] usbhid: USB HID core driver [ 1.181989] TCP: cubic registered [ 1.185354] NET: Registered protocol family 17 [ 1.189825] can: controller area network core (rev 20120528 abi 9) [ 1.196085] NET: Registered protocol family 29 [ 1.200560] can: raw protocol (rev 20120528) [ 1.204841] can: broadcast manager protocol (rev 20120528 t) [ 1.210533] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216415] Key type dns_resolver registered [ 1.220861] ThumbEE CPU extension supported. [ 1.225178] Registering SWP/SWPB emulation handler [ 1.231156] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246354] ALSA device list: [ 1.249338] No soundcards found. [ 1.253437] Waiting for root device /dev/mmcblk0p2... [ 60.325110] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.243811] hub 1-0:1.0: USB hub found [ 2.247640] hub 1-0:1.0: 1 port detected [ 2.252648] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.261098] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.265643] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.273576] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.280231] [drm] No driver support for vblank timestamp query. [ 2.286223] host1x drm: No connectors reported connected with modes [ 2.292518] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.307611] Console: switching to colour frame buffer device 128x48 [ 2.321122] host1x drm: fb0: frame buffer device [ 2.325853] host1x drm: registered panic notifier [ 2.342001] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.348576] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.354015] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.361889] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.377022] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.383815] hub 2-0:1.0: USB hub found [ 2.387627] hub 2-0:1.0: 1 port detected [ 2.392724] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.400073] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.418266] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.422814] +1.8V_RUN_VPP_FUSE: disabling [ 2.427242] +2.8V_RUN_CAM_AF: disabling [ 2.431427] +3.3V_RUN_TOUCH: disabling [ 2.435546] +1.05V_RUN_CAM_REAR: disabling [ 2.439790] +VDDIO_SDMMC3: disabling [ 2.443496] +1.2V_RUN_CAM_FRONT: disabling [ 2.447721] +2.8V_RUN_CAM: disabling [ 2.451412] +1.8V_RUN_CAM: disabling [ 2.455117] +1.05V_RUN: disabling [ 2.458561] +USB0_VBUS_SW: disabling [ 2.462147] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.467020] ALSA device list: [ 2.469984] #0: NVIDIA Tegra Jetson TK1 [ 2.474608] Waiting for root device /dev/mmcblk0p1... [ 2.697007] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.159815] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[708]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3215 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.140560] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.147082] hub 3-0:1.0: USB hub found [ 2.150869] hub 3-0:1.0: 1 port detected [ 2.155713] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.162618] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-14 07:28:34 UTC (1402730914) [ 2.174717] vdd_1v2: disabling [ 2.177938] vdd_1v5: disabling [ 2.181819] ALSA device list: [ 2.184777] #0: NVIDIA Tegra Seaboard [ 2.189187] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.196943] Please append a correct "root=" boot option; here are the available partitions: [ 2.205298] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.213546] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140613 #1 [ 2.220691] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.228428] [<c0211c68>] (show_stack) from [<c0811e00>] (dump_stack+0x88/0x98) [ 2.235638] [<c0811e00>] (dump_stack) from [<c080ec50>] (panic+0xa0/0x218) [ 2.242504] [<c080ec50>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.249973] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.257875] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.265864] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.274720] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cf48>] (kernel_init+0x8/0xf0) [ 2.282795] [<c080cf48>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.290348] CPU1: stopping [ 2.293049] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-next-20140613 #1 [ 2.300179] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.307911] [<c0211c68>] (show_stack) from [<c0811e00>] (dump_stack+0x88/0x98) [ 2.315119] [<c0811e00>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.322500] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.330053] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.337515] Exception stack(0xea087f68 to 0xea087fb0) [ 2.342554] 7f60: 00000000 c0bc1fb4 c0bc1fb4 0000004c 88327480 00000000 [ 2.350714] 7f80: 887be160 00000000 eafb6db0 ea086000 00000000 c081f050 00000015 ea087fb0 [ 2.358870] 7fa0: c06b31ec c06b31f8 60000113 ffffffff [ 2.363915] [<c02127c0>] (__irq_svc) from [<c06b31f8>] (cpuidle_enter_state+0x68/0x100) [ 2.371912] [<c06b31f8>] (cpuidle_enter_state) from [<c027f2a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.380681] [<c027f2a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.387453] drm_kms_helper: panic occurred, switching back to text console [ 2.394331] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.743743] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755676] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.763000] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774475] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.783020] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794921] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802246] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813720] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821563] HS USB OTG: no transceiver configured [ 3.826263] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.834106] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.842041] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853942] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.861267] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872741] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881286] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.893188] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.900512] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911987] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919799] HS USB OTG: no transceiver configured [ 3.924530] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932373] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940277] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.952209] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.959503] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970977] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.979492] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.979492] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.979522] musb-hdrc musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.979583] HS USB OTG: no transceiver configured [ 3.979614] musb-hdrc musb-hdrc.26.auto: musb_init_controller failed with status -517 [ 3.979614] platform musb-hdrc.26.auto: Driver musb-hdrc requests probe deferral [ 3.980133] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.26.auto [ 3.980133] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.980133] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.980133] musb-ux500 musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.980285] Unable to handle kernel paging request at virtual address 000074af [ 4.072326] pgd = 0a010010 ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.065107] ohci-platform: OHCI generic platform driver [ 1.070508] ohci-omap3: OHCI OMAP3 driver [ 1.074677] SPEAr-ohci: OHCI SPEAr driver [ 1.079506] usbcore: registered new interface driver usb-storage [ 1.090515] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.095596] ci_hdrc ci_hdrc.0: no supported roles [ 1.100423] 2184200.usb supply vbus not found, using dummy regulator [ 1.110528] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.115609] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.120527] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.132833] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.139032] hub 1-0:1.0: USB hub found [ 1.142856] hub 1-0:1.0: 1 port detected [ 1.147543] mousedev: PS/2 mouse device common for all mice [ 1.155698] i2c /dev entries driver [ 1.160356] usbcore: registered new interface driver uvcvideo [ 1.166133] USB Video Class driver (1.1.1) [ 1.170253] gspca_main: v2.14.0 registered [ 1.176946] sdhci: Secure Digital Host Controller Interface driver [ 1.183155] sdhci: Copyright(c) Pierre Ossman [ 1.188327] Synopsys Designware Multimedia Card Interface Driver [ 1.195258] usbcore: registered new interface driver usbhid [ 1.200854] usbhid: USB HID core driver [ 1.209236] TCP: cubic registered [ 1.212570] NET: Registered protocol family 17 [ 1.217059] can: controller area network core (rev 20120528 abi 9) [ 1.223319] NET: Registered protocol family 29 [ 1.227798] can: raw protocol (rev 20120528) [ 1.232081] can: broadcast manager protocol (rev 20120528 t) [ 1.237769] can: netlink gateway (rev 20130117) max_hops=1 [ 1.243659] Key type dns_resolver registered [ 1.248416] ThumbEE CPU extension supported. [ 1.252715] Registering SWP/SWPB emulation handler [ 1.258678] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.273973] ALSA device list: [ 1.276956] No soundcards found. [ 1.280949] Waiting for root device /dev/mmcblk0p2... [ 60.323437] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

11 years, 5 months

next build: 269 warnings 0 failures (next/next-20140613)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: f9801c5 Add linux-next specific files for 20140613 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140613/ Runtime: 42m 47s Passed: 126 Failed: 0 Warnings: 269 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 include/linux/of.h:772:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 22 include/linux/ftrace.h:623:60: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

arm-soc boot: 32 passed 8 failed (arm-soc/v3.15-8902-gafa9c74)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.72 cubie2 multi_v7_defconfig : FAILED 1:37.55 cubie2 multi_lpae_defconfig : FAILED 1:25.10 omap5uevm omap2plus_defconfig : FAILED 1:46.49 omap5uevm multi_v7_defconfig : FAILED 2:03.46 omap5uevm multi_lpae_defconfig : FAILED 1:47.94 snow multi_lpae_defconfig : FAILED 1:13.89 snowball u8500_defconfig : FAILED 1:51.73 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.90 arndale exynos_defconfig : passed 1:21.61 arndale multi_v7_defconfig : passed 1:38.33 arndale multi_lpae_defconfig : passed 1:30.73 bbb omap2plus_defconfig : passed 1:32.11 bbb multi_v7_defconfig : passed 1:24.73 beaver tegra_defconfig : passed 0:55.69 capri bcm_defconfig : passed 0:38.29 capri multi_v7_defconfig : passed 0:41.50 cubie sunxi_defconfig : passed 1:06.25 cubie multi_v7_defconfig : passed 1:38.79 cubox multi_v7_defconfig : passed 1:27.91 dalmore tegra_defconfig : passed 1:26.10 dalmore multi_v7_defconfig : passed 1:24.20 dalmore multi_lpae_defconfig : passed 1:19.64 hummingboard imx_v6_v7_defconfig : passed 1:24.07 hummingboard multi_v7_defconfig : passed 1:25.48 jetson tegra_defconfig : passed 1:01.00 jetson multi_v7_defconfig : passed 0:56.38 jetson multi_lpae_defconfig : passed 1:01.01 panda omap2plus_defconfig : warnings 1:28.02 panda multi_v7_defconfig : warnings 1:57.81 sama5 sama5_defconfig : warnings 1:53.82 seaboard tegra_defconfig : passed 1:06.80 seaboard multi_v7_defconfig : passed 1:26.77 snow exynos_defconfig : passed 1:22.74 snow multi_v7_defconfig : passed 1:21.54 snowball multi_v7_defconfig : passed 3:06.66 trimslice tegra_defconfig : passed 0:57.78 trimslice multi_v7_defconfig : passed 1:28.92 wandboard imx_v6_v7_defconfig : passed 1:05.00 wandboard multi_v7_defconfig : passed 1:14.74 Offline boards: beaver multi_v7_defconfig : OFFLINE 1:39.07 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.328869] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.337835] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347370] scsi0 : ahci_platform [ 1.351080] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.359820] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365468] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373528] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.379732] mmc0: new high speed SDHC card at address aaaa [ 1.385616] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.391898] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397451] hub 1-0:1.0: USB hub found [ 1.401695] hub 1-0:1.0: 1 port detected [ 1.405791] mmcblk0: p1 [ 1.410081] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.415765] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.423746] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435141] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442118] hub 2-0:1.0: USB hub found [ 1.445971] hub 2-0:1.0: 1 port detected [ 1.450978] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457680] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465518] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.529995] hub 3-0:1.0: USB hub found [ 1.533846] hub 3-0:1.0: 1 port detected [ 1.538845] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545564] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553425] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.614948] hub 4-0:1.0: USB hub found [ 1.618790] hub 4-0:1.0: 1 port detected [ 1.623454] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:17 UTC (17) [ 1.711022] No MAC Management Counters available [ 1.715799] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722422] IP-Config: Failed to open eth0 [ 1.726550] IP-Config: No network devices available [ 1.731464] vcc3v0: disabling [ 1.734543] ALSA device list: [ 1.737521] No soundcards found. [ 1.741659] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.324301] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333269] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342821] scsi0 : ahci_platform [ 1.346529] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355274] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360924] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368977] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375181] mmc0: new high speed SDHC card at address aaaa [ 1.381051] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387328] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392877] hub 1-0:1.0: USB hub found [ 1.397103] hub 1-0:1.0: 1 port detected [ 1.401192] mmcblk0: p1 [ 1.405512] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411200] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419178] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430582] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437604] hub 2-0:1.0: USB hub found [ 1.441445] hub 2-0:1.0: 1 port detected [ 1.446441] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453127] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460967] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525442] hub 3-0:1.0: USB hub found [ 1.529281] hub 3-0:1.0: 1 port detected [ 1.534314] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.541037] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548874] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610403] hub 4-0:1.0: USB hub found [ 1.614241] hub 4-0:1.0: 1 port detected [ 1.618919] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.706455] No MAC Management Counters available [ 1.711228] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717846] IP-Config: Failed to open eth0 [ 1.721965] IP-Config: No network devices available [ 1.726883] vcc3v0: disabling [ 1.729961] ALSA device list: [ 1.732941] No soundcards found. [ 1.737089] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.994020] mmc0: new high speed SDHC card at address aaaa [ 0.999948] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005960] mmcblk0: p1 [ 1.016222] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023704] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029610] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038579] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047471] scsi0 : ahci_platform [ 1.051120] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059388] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064984] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072855] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096146] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103113] hub 1-0:1.0: USB hub found [ 1.106950] hub 1-0:1.0: 1 port detected [ 1.111426] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117066] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124906] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146134] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.153027] hub 2-0:1.0: USB hub found [ 1.156852] hub 2-0:1.0: 1 port detected [ 1.161303] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167977] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175819] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240947] hub 3-0:1.0: USB hub found [ 1.244740] hub 3-0:1.0: 1 port detected [ 1.249257] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255890] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263762] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330988] hub 4-0:1.0: USB hub found [ 1.334773] hub 4-0:1.0: 1 port detected [ 1.339139] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.426163] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442448] No MAC Management Counters available [ 1.447218] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453821] IP-Config: Failed to open eth0 [ 1.457945] IP-Config: No network devices available [ 1.462842] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071598] can: broadcast manager protocol (rev 20120528 t) [ 47.071610] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071912] Key type dns_resolver registered [ 47.071991] omap_vc_init_channel: No PMIC info for vdd_core [ 47.071993] omap_vp_init: No PMIC info for vdd_core [ 47.071997] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.071998] omap_vp_init: No PMIC info for vdd_mm [ 47.072002] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072004] omap_vp_init: No PMIC info for vdd_mpu [ 47.072316] ThumbEE CPU extension supported. [ 47.072331] Registering SWP/SWPB emulation handler [ 47.077472] palmas 0-0048: Irq flag is 0x00000000 [ 47.155285] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.161912] mmc0: new high speed MMC card at address 0001 [ 47.167860] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.172681] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.178958] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.185436] smps123: 600 <--> 1500 mV at 1060 mV [ 47.190727] mmcblk0: unknown partition table [ 47.196079] mmcblk0boot1: unknown partition table [ 47.201115] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206385] mmcblk0boot0: unknown partition table [ 47.212517] smps6: 1200 mV [ 47.216476] smps7: 1800 mV [ 47.220595] smps8: 600 <--> 1310 mV at 1040 mV [ 47.226307] smps9: failed to get the current voltage [ 47.231559] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.243608] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.351566] omap_i2c 48070000.i2c: controller timed out [ 48.376768] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.521779] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.527867] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.535332] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.542195] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.549913] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.563350] ALSA device list: [ 48.566452] No soundcards found. [ 48.570452] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.516580] can: raw protocol (rev 20120528) [ 47.516588] can: broadcast manager protocol (rev 20120528 t) [ 47.516600] can: netlink gateway (rev 20130117) max_hops=1 [ 47.516901] Key type dns_resolver registered [ 47.516984] omap_vc_init_channel: No PMIC info for vdd_core [ 47.516987] omap_vp_init: No PMIC info for vdd_core [ 47.516991] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.516992] omap_vp_init: No PMIC info for vdd_mm [ 47.516996] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.516998] omap_vp_init: No PMIC info for vdd_mpu [ 47.517312] ThumbEE CPU extension supported. [ 47.517327] Registering SWP/SWPB emulation handler [ 47.522506] palmas 0-0048: Irq flag is 0x00000000 [ 47.600242] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.606931] mmc0: new high speed MMC card at address 0001 [ 47.612853] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.617681] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.623949] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.630416] smps123: 600 <--> 1500 mV at 1060 mV [ 47.635694] mmcblk0: unknown partition table [ 47.641052] mmcblk0boot1: unknown partition table [ 47.646070] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651322] mmcblk0boot0: unknown partition table [ 47.657495] smps6: 1200 mV [ 47.661501] smps7: 1800 mV [ 47.665631] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671374] smps9: failed to get the current voltage [ 47.676637] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.688687] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816782] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961794] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.967901] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975349] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982205] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.989917] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003331] ALSA device list: [ 48.006427] No soundcards found. [ 48.010426] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.013049] NET: Registered protocol family 15 [ 2.013226] Key type dns_resolver registered [ 2.013320] omap_vc_init_channel: No PMIC info for vdd_core [ 2.013324] omap_vp_init: No PMIC info for vdd_core [ 2.013333] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.013336] omap_vp_init: No PMIC info for vdd_mm [ 2.013346] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.013349] omap_vp_init: No PMIC info for vdd_mpu [ 2.013893] ThumbEE CPU extension supported. [ 2.013916] Registering SWP/SWPB emulation handler [ 2.013925] SmartReflex Class3 initialized [ 2.043270] palmas 0-0048: Irq flag is 0x00000000 [ 2.121664] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.126781] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.133215] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.142147] mmcblk0: unknown partition table [ 2.148874] mmcblk0boot1: unknown partition table [ 2.155141] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.155758] mmcblk0boot0: unknown partition table [ 2.213341] smps123: 600 <--> 1500 mV at 1060 mV [ 2.220354] smps45: 600 <--> 1310 mV at 1030 mV [ 2.227557] smps6: 1200 mV [ 2.232317] smps7: 1800 mV [ 2.237231] smps8: 600 <--> 1310 mV at 1040 mV [ 2.243680] smps9: failed to get the current voltage [ 2.249600] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.263959] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.272805] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.280538] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.286691] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.295804] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.305163] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.312115] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.320692] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.329330] sr_init: No PMIC hook to init smartreflex [ 2.334826] sr_init: platform driver register failed for SR [ 2.363018] pbias_mmc_omap5: disabling [ 2.368513] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.690160] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.690700] Console: colour dummy device 80x30 [ 2889.690711] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.690718] pid_max: default: 32768 minimum: 301 [ 2889.690779] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.690785] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.691057] CPU: Testing write buffer coherency: ok [ 2889.691168] CPU0: update cpu_power 1024 [ 2889.691174] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.691266] Setting up static identity map for 0x4081d0b0 - 0x4081d148 [ 2889.692360] CPU1: Booted secondary processor [ 2889.692396] CPU1: update cpu_power 1024 [ 2889.692400] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.692444] Brought up 2 CPUs [ 2889.692453] SMP: Total of 2 processors activated. [ 2889.692457] CPU: All CPU(s) started in HYP mode. [ 2889.692461] CPU: Virtualization extensions available. [ 2889.692699] devtmpfs: initialized [ 2889.694562] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.694747] pinctrl core: initialized pinctrl subsystem [ 2889.694947] regulator-dummy: no parameters [ 2889.700863] NET: Registered protocol family 16 [ 2889.701743] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.702441] cpuidle: using governor ladder [ 2889.702449] cpuidle: using governor menu [ 2889.707521] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.711337] No ATAGs? [ 2889.711356] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.711362] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.711456] EXYNOS5250 PMU I~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.538482] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550415] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.557739] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569213] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.577789] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.589691] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597015] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608489] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616302] HS USB OTG: no transceiver configured [ 3.621032] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.628875] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.636810] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.648712] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656036] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667510] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676086] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.687988] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695312] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.706787] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714630] HS USB OTG: no transceiver configured [ 3.719329] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727172] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735107] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747039] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754364] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.765838] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774414] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786315] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.793640] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805114] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.812927] HS USB OTG: no transceiver configured [ 3.817626] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825500] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833435] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845367] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852661] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864135] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.872711] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

arm-soc build: 41 warnings 0 failures (arm-soc/v3.15-8902-gafa9c74)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: afa9c74 Revert "ARM: use menuconfig for sub-arch menus" Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.15-8902-gafa9c74/ Runtime: 46m 5s Passed: 126 Failed: 0 Warnings: 41 Section mismatches: 16 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

arm-soc boot: 13 passed 21 failed (arm-soc/v3.15-8898-gf79922c)

by Olof's autobooter

Failed boards: arndale multi_v7_defconfig : FAILED 1:08.75 arndale multi_lpae_defconfig : FAILED 2:15.60 beaver multi_v7_defconfig : FAILED 0:30.46 capri multi_v7_defconfig : FAILED 0:25.98 cubie multi_v7_defconfig : FAILED 0:34.03 cubie2 sunxi_defconfig : FAILED 1:23.62 cubie2 multi_v7_defconfig : FAILED 1:25.74 cubie2 multi_lpae_defconfig : FAILED 0:56.11 cubox multi_v7_defconfig : FAILED 0:32.53 dalmore multi_v7_defconfig : FAILED 0:35.98 dalmore multi_lpae_defconfig : FAILED 1:07.64 hummingboard multi_v7_defconfig : FAILED 0:30.65 jetson multi_v7_defconfig : FAILED 0:35.54 jetson multi_lpae_defconfig : FAILED 0:59.48 seaboard multi_v7_defconfig : FAILED 0:38.32 snow multi_v7_defconfig : FAILED 1:14.50 snow multi_lpae_defconfig : FAILED 1:12.93 snowball u8500_defconfig : FAILED 1:46.58 snowball multi_v7_defconfig : FAILED 1:32.25 trimslice multi_v7_defconfig : FAILED 0:34.13 wandboard multi_v7_defconfig : FAILED 0:29.46 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.68 arndale exynos_defconfig : passed 1:19.31 beaver tegra_defconfig : passed 1:01.94 capri bcm_defconfig : passed 0:40.22 cubie sunxi_defconfig : passed 1:23.96 dalmore tegra_defconfig : passed 1:22.49 hummingboard imx_v6_v7_defconfig : passed 1:27.64 jetson tegra_defconfig : passed 1:03.32 sama5 sama5_defconfig : warnings 2:01.66 seaboard tegra_defconfig : passed 1:04.40 snow exynos_defconfig : passed 1:30.46 trimslice tegra_defconfig : passed 1:07.43 wandboard imx_v6_v7_defconfig : passed 1:08.93 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board arndale-multi_lpae_defconfig failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.187 Filename 'arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *EHCI timed out on TD - token=0x8008d80 T #EHCI timed out on TD - token=0x8008d80 T Abort ARNDALE5250 # tftp 0x407c0000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/exynos5250-arndale.dtb tftp 0x407c0000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.187 Filename 'arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *T ### done Bytes transferred = 35450 (8a7a hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw ARNDALE5250 # bootm 0x40800000 - 0x407c0000 bootm 0x40800000 - 0x407c0000 ## Booting kernel from Legacy Image at 40800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4568304 Bytes = 4.4 MiB Load Address: 40208000 Entry Point: 40208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff4000, end 4ffffa79 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board arndale-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.613069] [<c080e4f8>] (panic) from [<c022f47c>] (complete_and_exit+0x0/0x24) [ 1.620349] r3:eac04a00 r2:00000000 r1:00000004 r0:c099cc54 [ 1.625991] r7:eac7c004 [ 1.628517] [<c022eb64>] (do_exit) from [<c0230354>] (do_group_exit+0x48/0xcc) [ 1.635712] r7:eac7c004 [ 1.638242] [<c023030c>] (do_group_exit) from [<c023bbd4>] (get_signal_to_deliver+0x1b0/0x5bc) [ 1.646823] r7:eac7c004 r6:eac7dee0 r5:eac80000 r4:00000004 [ 1.652473] [<c023ba24>] (get_signal_to_deliver) from [<c020c560>] (do_signal+0x114/0x440) [ 1.660711] r10:00000000 r9:be890950 r8:b6efc15c r7:eac7decc r6:eac7c00c r5:b6efc158 [ 1.668524] r4:eac7dfb0 [ 1.671047] [<c020c44c>] (do_signal) from [<c020ca14>] (do_work_pending+0x84/0xbc) [ 1.678592] r10:00000000 r9:eac7c000 r8:c0209ac4 r7:eac7dfb0 r6:c0209ac4 r5:eac7c000 [ 1.686403] r4:eac7c010 [ 1.688928] [<c020c990>] (do_work_pending) from [<c0209960>] (work_pending+0xc/0x20) [ 1.696646] r7:00900000 r6:b6f09dc8 r5:b6f0a978 r4:b6f0a958 [ 1.702300] CPU1: stopping [ 1.704985] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-08898-gf79922c #1 [ 1.712183] Backtrace: [ 1.714624] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 1.722167] r6:00000000 r5:00000000 r4:c0b21e5c [ 1.726777] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 1.733982] [<c0811818>] (dump_stack) from [<c020fce4>] (handle_IPI+0x150/0x17c) [ 1.741348] r5:c0b01adc r4:00000001 [ 1.744914] [<c020fb94>] (handle_IPI) from [<c020885c>] (gic_handle_irq+0x6c/0x70) [ 1.752458] r6:eac9df60 r5:c0b0cc90 r4:f000200c [ 1.757065] [<c02087f0>] (gic_handle_irq) from [<c020dc74>] (__irq_svc+0x34/0x44) [ 1.764526] Exception stack(0xeac9df60 to 0xeac9dfa8) [ 1.769564] df60: ffffffed 00000000 ffffffed c021a540 c0b0c884 eac9c000 c0b0c818 00000000 [ 1.777722] df80: 00000000 00000000 eac9c000 eac9dfb4 eac9dfb8 eac9dfa8 c020a58c c020a590 [ 1.785878] dfa0: 60000113 ffffffff [ 1.789349] r7:eac9df94 r6:ffffffff r5:60000113 r4:c020a590 [ 1.795002] [<c020a550>] (arch_cpu_idle) from [<c0264890>] (cpu_startup_entry+0x20c/0x240) [ 1.803246] [<c0264684>] (cpu_startup_entry) from [<c020f93c>] (secondary_start_kernel+0x140/0x14c) [ 1.812264] r7:c0ba41d4 [ 1.814788] [<c020f7fc>] (secondary_start_kernel) from [<402089a4>] (0x402089a4) [ 1.822160] r5:00000015 r4:6ac8406a [ 1.825726] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.825726] ~$off # PYBOOT: Exception: panic ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 4.356269] 5f40: 00000000 00000001 eb1cdc18 eaca4000 eaca5f98 eaca5f6c eaca5f6c c06a7b20 [ 4.364425] 5f60: c06a7b2c 60000113 ffffffff [ 4.368680] r7:eaca5f58 r6:ffffffff r5:60000113 r4:c06a7b2c [ 4.374345] [<c06a7ab4>] (cpuidle_enter_state) from [<c06a7cf8>] (cpuidle_enter+0x3c/0x48) [ 4.382586] r9:00000000 r8:c0b14480 r7:eb1cdc18 r6:00000001 r5:eb1cdc18 r4:c0b14480 [ 4.390340] [<c06a7cbc>] (cpuidle_enter) from [<c02648a0>] (cpu_startup_entry+0x21c/0x240) [ 4.398582] r6:c0b0c818 r5:eaca4000 r4:c0b0c884 [ 4.403206] [<c0264684>] (cpu_startup_entry) from [<c020f93c>] (secondary_start_kernel+0x140/0x14c) [ 4.412228] r7:c0ba41d4 [ 4.414757] [<c020f7fc>] (secondary_start_kernel) from [<802089a4>] (0x802089a4) [ 4.422131] r5:00000015 r4:aac8406a [ 4.425706] CPU1: stopping [ 4.428406] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-08898-gf79922c #1 [ 4.435607] Backtrace: [ 4.438055] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 4.445603] r6:00000000 r5:00000000 r4:c0b21e5c [ 4.450228] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 4.457434] [<c0811818>] (dump_stack) from [<c020fce4>] (handle_IPI+0x150/0x17c) [ 4.464810] r5:c0b01adc r4:00000001 [ 4.468387] [<c020fb94>] (handle_IPI) from [<c020885c>] (gic_handle_irq+0x6c/0x70) [ 4.475935] r6:eaca1f24 r5:c0b0cc90 r4:fe44010c [ 4.480558] [<c02087f0>] (gic_handle_irq) from [<c020dc74>] (__irq_svc+0x34/0x44) [ 4.488020] Exception stack(0xeaca1f24 to 0xeaca1f6c) [ 4.493058] 1f20: 00000000 c0b14480 c0b144cc 0000004c edda2eb8 00000000 f652bf10 [ 4.501216] 1f40: 00000000 00000001 eb1bdc18 eaca0000 eaca1f98 eaca1f6c eaca1f6c c06a7b20 [ 4.509372] 1f60: c06a7b2c 60000113 ffffffff [ 4.513627] r7:eaca1f58 r6:ffffffff r5:60000113 r4:c06a7b2c [ 4.519292] [<c06a7ab4>] (cpuidle_enter_state) from [<c06a7cf8>] (cpuidle_enter+0x3c/0x48) [ 4.527533] r9:00000000 r8:c0b14480 r7:eb1bdc18 r6:00000001 r5:eb1bdc18 r4:c0b14480 [ 4.535287] [<c06a7cbc>] (cpuidle_enter) from [<c02648a0>] (cpu_startup_entry+0x21c/0x240) [ 4.543528] r6:c0b0c818 r5:eaca0000 r4:c0b0c884 [ 4.548151] [<c0264684>] (cpu_startup_entry) from [<c020f93c>] (secondary_start_kernel+0x140/0x14c) [ 4.557173] r7:c0ba41d4 [ 4.559701] [<c020f7fc>] (secondary_start_kernel) from [<802089a4>] (0x802089a4) [ 4.567076] r5:00000015 r4:aac8406a [ 4.570650] drm_kms_helper: panic occurred, switching back to text console [ 4.577539] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 4.577539] ~$off # PYBOOT: Exception: panic ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.835000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.835000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.840000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.845000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.850000] Alternate GPT is invalid, using primary GPT. [ 0.855000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.860000] mmcblk0boot1: unknown partition table [ 0.865000] mmcblk0boot0: unknown partition table [ 0.925000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 0.930000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 0.935000] devtmpfs: mounted [ 0.940000] Freeing unused kernel memory: 576K (c0a72000 - c0b02000) [ 0.955000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 0.955000] [ 0.955000] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 0.955000] Backtrace: [ 0.955000] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 0.955000] r6:eac52000 r5:00000000 r4:c0b21e5c [ 0.955000] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 0.955000] [<c0811818>] (dump_stack) from [<c080e59c>] (panic+0xa8/0x228) [ 0.955000] r5:00000000 r4:c099cc54 [ 0.955000] [<c080e4f8>] (panic) from [<c022f47c>] (complete_and_exit+0x0/0x24) [ 0.955000] r3:eac03400 r2:00000000 r1:00000004 r0:c099cc54 [ 0.955000] r7:eac52004 [ 0.955000] [<c022eb64>] (do_exit) from [<c0230354>] (do_group_exit+0x48/0xcc) [ 0.955000] r7:eac52004 [ 0.955000] [<c023030c>] (do_group_exit) from [<c023bbd4>] (get_signal_to_deliver+0x1b0/0x5bc) [ 0.955000] r7:eac52004 r6:eac53ee0 r5:eac64000 r4:00000004 [ 0.955000] [<c023ba24>] (get_signal_to_deliver) from [<c020c560>] (do_signal+0x114/0x440) [ 0.955000] r10:00000000 r9:bebc6960 r8:b6f2715c r7:eac53ecc r6:eac5200c r5:b6f27158 [ 0.955000] r4:eac53fb0 [ 0.955000] [<c020c44c>] (do_signal) from [<c020ca14>] (do_work_pending+0x84/0xbc) [ 0.955000] r10:00000000 r9:eac52000 r8:c0209ac4 r7:eac53fb0 r6:c0209ac4 r5:eac52000 [ 0.955000] r4:eac52010 [ 0.955000] [<c020c990>] (do_work_pending) from [<c0209960>] (work_pending+0xc/0x20) [ 0.955000] r7:00900000 r6:b6f34dc8 r5:b6f35978 r4:b6f35958 [ 0.955000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 0.955000] ~$off # PYBOOT: Exception: panic ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- [ 9.275492] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.134 [ 9.283286] IP-Config: Complete: [ 9.286551] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.134, mask=255.255.255.0, gw=172.16.1.1 [ 9.296556] host=172.16.1.134, domain=lixom.net, nis-domain=(none) [ 9.303175] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 9.309705] nameserver0=75.75.75.75, nameserver1=76.76.76.76, nameserver2=8.8.8.8 [ 9.317883] vcc3v0: disabling [ 9.320969] ALSA device list: [ 9.323936] No soundcards found. [ 9.332512] VFS: Mounted root (nfs filesystem) on device 0:12. [ 9.338836] devtmpfs: mounted [ 9.342419] Freeing unused kernel memory: 576K (c0a72000 - c0b02000) [ 9.364952] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 9.364952] [ 9.374085] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 9.380863] Backtrace: [ 9.383345] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 9.390901] r6:eac4a000 r5:00000000 r4:c0b21e5c [ 9.395563] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 9.402781] [<c0811818>] (dump_stack) from [<c080e59c>] (panic+0xa8/0x228) [ 9.409647] r5:00000000 r4:c099cc54 [ 9.413252] [<c080e4f8>] (panic) from [<c022f47c>] (complete_and_exit+0x0/0x24) [ 9.420549] r3:eac03800 r2:00000000 r1:00000004 r0:c099cc54 [ 9.426246] r7:eac4a004 [ 9.428793] [<c022eb64>] (do_exit) from [<c0230354>] (do_group_exit+0x48/0xcc) [ 9.436003] r7:eac4a004 [ 9.438556] [<c023030c>] (do_group_exit) from [<c023bbd4>] (get_signal_to_deliver+0x1b0/0x5bc) [ 9.447152] r7:eac4a004 r6:eac4bee0 r5:eac5c000 r4:00000004 [ 9.452856] [<c023ba24>] (get_signal_to_deliver) from [<c020c560>] (do_signal+0x114/0x440) [ 9.461106] r10:00000000 r9:bec77960 r8:b6fe015c r7:eac4becc r6:eac4a00c r5:b6fe0158 [ 9.468985] r4:eac4bfb0 [ 9.471532] [<c020c44c>] (do_signal) from [<c020ca14>] (do_work_pending+0x84/0xbc) [ 9.479089] r10:00000000 r9:eac4a000 r8:c0209ac4 r7:eac4bfb0 r6:c0209ac4 r5:eac4a000 [ 9.486967] r4:eac4a010 [ 9.489512] [<c020c990>] (do_work_pending) from [<c0209960>] (work_pending+0xc/0x20) [ 9.497242] r7:00900000 r6:b6feddc8 r5:b6fee978 r4:b6fee958 [ 9.502947] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 9.502947] ~$off # PYBOOT: Exception: panic ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x42000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/zImage tftp 0x42000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 4.2 MiB/s done Bytes transferred = 4568304 (45b4f0 hex) sun7i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 920.9 KiB/s done Bytes transferred = 20757 (5115 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 ; bootm 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 ; bootm 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x45b4f0 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff7000, end 40fff114 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.293789] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.302761] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.312220] scsi0 : ahci_platform [ 1.315907] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.324575] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.330225] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.338286] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.344501] mmc0: new high speed SDHC card at address aaaa [ 1.350357] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.356646] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.362151] hub 1-0:1.0: USB hub found [ 1.366347] hub 1-0:1.0: 1 port detected [ 1.370448] mmcblk0: p1 [ 1.374595] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.380285] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.388255] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.400005] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.406988] hub 2-0:1.0: USB hub found [ 1.410832] hub 2-0:1.0: 1 port detected [ 1.415714] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.422405] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.430244] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.494866] hub 3-0:1.0: USB hub found [ 1.498712] hub 3-0:1.0: 1 port detected [ 1.503591] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.510320] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.518195] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.579839] hub 4-0:1.0: USB hub found [ 1.583698] hub 4-0:1.0: 1 port detected [ 1.588248] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.675895] No MAC Management Counters available [ 1.680669] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.687297] IP-Config: Failed to open eth0 [ 1.691423] IP-Config: No network devices available [ 1.696335] vcc3v0: disabling [ 1.699426] ALSA device list: [ 1.702412] No soundcards found. [ 1.706460] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.993897] mmc0: new high speed SDHC card at address aaaa [ 0.999821] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005810] mmcblk0: p1 [ 1.016090] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023570] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029484] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038456] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047355] scsi0 : ahci_platform [ 1.051008] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059281] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064875] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072744] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096014] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.102984] hub 1-0:1.0: USB hub found [ 1.106823] hub 1-0:1.0: 1 port detected [ 1.111287] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.116925] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124764] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146007] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152899] hub 2-0:1.0: USB hub found [ 1.156727] hub 2-0:1.0: 1 port detected [ 1.161182] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167857] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175697] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240816] hub 3-0:1.0: USB hub found [ 1.244611] hub 3-0:1.0: 1 port detected [ 1.249129] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255760] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263634] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330858] hub 4-0:1.0: USB hub found [ 1.334649] hub 4-0:1.0: 1 port detected [ 1.339017] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.426035] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442329] No MAC Management Counters available [ 1.447097] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453697] IP-Config: Failed to open eth0 [ 1.457820] IP-Config: No network devices available [ 1.462715] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.433432] No soundcards found. [ 1.437387] Waiting for root device /dev/mmcblk0p2... [ 1.585257] mmc0: new high speed SDHC card at address e624 [ 1.591094] mmcblk0: mmc0:e624 SU04G 3.69 GiB [ 1.605012] mmcblk0: p1 p2 [ 1.654471] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.663240] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.689360] EXT4-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended [ 1.719104] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.727211] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.738994] devtmpfs: mounted [ 1.742458] Freeing unused kernel memory: 576K (c0a72000 - c0b02000) [ 1.788670] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.788670] [ 1.797770] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 1.804520] Backtrace: [ 1.806977] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 1.814509] r6:eac50000 r5:00000000 r4:c0b21e5c [ 1.819139] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 1.826337] [<c0811818>] (dump_stack) from [<c080e59c>] (panic+0xa8/0x228) [ 1.833180] r5:00000000 r4:c099cc54 [ 1.836763] [<c080e4f8>] (panic) from [<c022f47c>] (complete_and_exit+0x0/0x24) [ 1.844030] r3:eac03a00 r2:00000000 r1:00000004 r0:c099cc54 [ 1.849691] r7:eac50004 [ 1.852222] [<c022eb64>] (do_exit) from [<c0230354>] (do_group_exit+0x48/0xcc) [ 1.859410] r7:eac50004 [ 1.861950] [<c023030c>] (do_group_exit) from [<c023bbd4>] (get_signal_to_deliver+0x1b0/0x5bc) [ 1.870521] r7:eac50004 r6:eac51ee0 r5:eac54000 r4:00000004 [ 1.876189] [<c023ba24>] (get_signal_to_deliver) from [<c020c560>] (do_signal+0x114/0x440) [ 1.884414] r10:00020000 r9:beefd950 r8:b6f3815c r7:eac51ecc r6:eac5000c r5:b6f38158 [ 1.892241] r4:eac51fb0 [ 1.894773] [<c020c44c>] (do_signal) from [<c020ca14>] (do_work_pending+0x84/0xbc) [ 1.902299] r10:00020000 r9:eac50000 r8:c0209ac4 r7:eac51fb0 r6:c0209ac4 r5:eac50000 [ 1.910126] r4:eac50010 [ 1.912657] [<c020c990>] (do_work_pending) from [<c0209960>] (work_pending+0xc/0x20) [ 1.920356] r7:00900000 r6:b6f45dc8 r5:b6f46978 r4:b6f46958 [ 1.926023] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.926023] ~$off # PYBOOT: Exception: panic ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/zImage tftp 0x82000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.115 Filename 'arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 3.1 MiB/s done Bytes transferred = 4568304 (45b4f0 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.115 Filename 'arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 928.7 KiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x45b4f0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 4.202536] r4:c0b01adc [ 4.205137] [<c020a1f4>] (handle_IRQ) from [<c0208830>] (gic_handle_irq+0x40/0x70) [ 4.212723] r6:eac6bcc8 r5:c0b0cc90 r4:fe44200c [ 4.217472] [<c02087f0>] (gic_handle_irq) from [<c020dc74>] (__irq_svc+0x34/0x44) [ 4.224978] Exception stack(0xeac6bcc8 to 0xeac6bd10) [ 4.230071] bcc0: 00000001 ffff18c5 00000000 00000000 00000282 0000001b [ 4.238286] bce0: 00000000 fe442000 00000000 c0ba54ec ea522000 eac6bd6c c0ba5980 eac6bd10 [ 4.246491] bd00: c0ba5980 c0231ed4 20000113 ffffffff [ 4.251563] r7:eac6bcfc r6:ffffffff r5:20000113 r4:c0231ed4 [ 4.257383] [<c0231dec>] (__do_softirq) from [<c023231c>] (irq_exit+0xb4/0xfc) [ 4.264625] r10:ea522000 r9:c0ba54ec r8:00000000 r7:fe442000 r6:00000000 r5:0000001b [ 4.272618] r4:eac6a030 [ 4.275223] [<c0232268>] (irq_exit) from [<c020a240>] (handle_IRQ+0x4c/0x98) [ 4.282289] r4:c0b01adc [ 4.284890] [<c020a1f4>] (handle_IRQ) from [<c0208830>] (gic_handle_irq+0x40/0x70) [ 4.292477] r6:eac6bdc0 r5:c0b0cc90 r4:fe44200c [ 4.297221] [<c02087f0>] (gic_handle_irq) from [<c020dc74>] (__irq_svc+0x34/0x44) [ 4.304726] Exception stack(0xeac6bdc0 to 0xeac6be08) [ 4.309823] bdc0: 00000051 20000093 c0b1ac94 c0b1ac94 c0ba54ec 00000000 eac6a000 00000000 [ 4.318036] bde0: 00000000 c0ba54ec ea522000 eac6be20 eac6bd34 eac6be08 c026c504 c080e6bc [ 4.326235] be00: 60000013 ffffffff [ 4.329749] r7:eac6bdf4 r6:ffffffff r5:60000013 r4:c080e6bc [ 4.335586] [<c080e4f8>] (panic) from [<c022f47c>] (complete_and_exit+0x0/0x24) [ 4.342915] r3:eac04400 r2:00000000 r1:00000004 r0:c099cc54 [ 4.348701] r7:eac6a004 [ 4.351322] [<c022eb64>] (do_exit) from [<c0230354>] (do_group_exit+0x48/0xcc) [ 4.358561] r7:eac6a004 [ 4.361187] [<c023030c>] (do_group_exit) from [<c023bbd4>] (get_signal_to_deliver+0x1b0/0x5bc) [ 4.369813] r7:eac6a004 r6:eac6bee0 r5:eac88000 r4:00000004 [ 4.375640] [<c023ba24>] (get_signal_to_deliver) from [<c020c560>] (do_signal+0x114/0x440) [ 4.383919] r10:00000000 r9:be81e950 r8:b6f4015c r7:eac6becc r6:eac6a00c r5:b6f40158 [ 4.391918] r4:eac6bfb0 [ 4.394530] [<c020c44c>] (do_signal) from [<c020ca14>] (do_work_pending+0x84/0xbc) [ 4.402118] r10:00000000 r9:eac6a000 r8:c0209ac4 r7:eac6bfb0 r6:c0209ac4 r5:eac6a000 [ 4.410110] r4:eac6a010 [ 4.412717] [<c020c990>] (do_work_pending) from [<c0209960>] (work_pending+0xc/0x20) [ 4.420478] r7:00900000 r6:b6f4ddc8 r5:b6f4e978 r4:b6f4e958 [ 4.426277] ---[ end trace 294f5e29eb5c497e ]--- ~$off # PYBOOT: Exception: panic ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.273538] No soundcards found. [ 1.277601] Waiting for root device /dev/mmcblk0p2... [ 1.328903] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.343037] mmc0: new high speed SDHC card at address b368 [ 1.348875] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.354767] mmcblk0: p1 p2 [ 1.387632] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.396807] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.418756] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.426913] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.442834] devtmpfs: mounted [ 1.446191] Freeing unused kernel memory: 576K (c0a72000 - c0b02000) [ 1.490667] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.490667] [ 1.499820] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 1.506614] Backtrace: [ 1.509101] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 1.516675] r6:db45a000 r5:00000000 r4:c0b21e5c [ 1.521341] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 1.528570] [<c0811818>] (dump_stack) from [<c080e59c>] (panic+0xa8/0x228) [ 1.535448] r5:00000000 r4:c099cc54 [ 1.539065] [<c080e4f8>] (panic) from [<c022f47c>] (complete_and_exit+0x0/0x24) [ 1.546370] r3:db404400 r2:00000000 r1:00000004 r0:c099cc54 [ 1.552063] r7:db45a004 [ 1.554616] [<c022eb64>] (do_exit) from [<c0230354>] (do_group_exit+0x48/0xcc) [ 1.561842] r7:db45a004 [ 1.564410] [<c023030c>] (do_group_exit) from [<c023bbd4>] (get_signal_to_deliver+0x1b0/0x5bc) [ 1.573018] r7:db45a004 r6:db45bee0 r5:db46c000 r4:00000004 [ 1.578720] [<c023ba24>] (get_signal_to_deliver) from [<c020c560>] (do_signal+0x114/0x440) [ 1.586981] r10:00000000 r9:becdc950 r8:b6fe115c r7:db45becc r6:db45a00c r5:b6fe1158 [ 1.594871] r4:db45bfb0 [ 1.597425] [<c020c44c>] (do_signal) from [<c020ca14>] (do_work_pending+0x84/0xbc) [ 1.604989] r10:00000000 r9:db45a000 r8:c0209ac4 r7:db45bfb0 r6:c0209ac4 r5:db45a000 [ 1.612878] r4:db45a010 [ 1.615438] [<c020c990>] (do_work_pending) from [<c0209960>] (work_pending+0xc/0x20) [ 1.623176] r7:00900000 r6:b6feedc8 r5:b6fef978 r4:b6fef958 [ 1.628903] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.628903] ~$off # PYBOOT: Exception: panic ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- Tegra124 (Jetson TK1) # tftp 0x82000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/zImage tftp 0x82000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.127 Filename 'arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 3 MiB/s done Bytes transferred = 4568304 (45b4f0 hex) Tegra124 (Jetson TK1) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra124 (Jetson TK1) # tftp 0x83000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/tegra124-jetson-tk1.dtb tftp 0x83000000 arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/tegra124-jetson-tk1.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.127 Filename 'arm-soc/v3.15-8898-gf79922c/multi_lpae_defconfig/dtbs/tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *### 2.3 MiB/s done Bytes transferred = 42784 (a720 hex) Tegra124 (Jetson TK1) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait debug Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x45b4f0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff2000, end 8ffff71f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.764650] 7f20: 00000000 c0b14794 c0b147e0 0000004c 8cd8449d 00000000 97accd2b [ 2.772819] 7f40: 00000000 00000001 eb1bac18 eaca6000 eaca7f98 eaca7f6c eaca7f6c c06a7b20 [ 2.780985] 7f60: c06a7b2c 60000113 ffffffff [ 2.785247] r7:eaca7f58 r6:ffffffff r5:60000113 r4:c06a7b2c [ 2.790948] [<c06a7ab4>] (cpuidle_enter_state) from [<c06a7cf8>] (cpuidle_enter+0x3c/0x48) [ 2.799196] r9:00000000 r8:c0b14794 r7:eb1bac18 r6:00000001 r5:eb1bac18 r4:c0b14794 [ 2.806990] [<c06a7cbc>] (cpuidle_enter) from [<c02648a0>] (cpu_startup_entry+0x21c/0x240) [ 2.815241] r6:c0b0c818 r5:eaca6000 r4:c0b0c884 [ 2.819892] [<c0264684>] (cpu_startup_entry) from [<c020f93c>] (secondary_start_kernel+0x140/0x14c) [ 2.828922] r7:c0ba41d4 [ 2.831467] [<c020f7fc>] (secondary_start_kernel) from [<802089a4>] (0x802089a4) [ 2.838850] r5:00000015 r4:aac9006a [ 2.842443] CPU0: stopping [ 2.845154] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-08898-gf79922c #1 [ 2.852364] Backtrace: [ 2.854830] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 2.862387] r6:00000000 r5:00000000 r4:c0b21e5c [ 2.867042] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 2.874263] [<c0811818>] (dump_stack) from [<c020fce4>] (handle_IPI+0x150/0x17c) [ 2.881645] r5:c0b01adc r4:00000000 [ 2.885241] [<c020fb94>] (handle_IPI) from [<c020885c>] (gic_handle_irq+0x6c/0x70) [ 2.892797] r6:c0b05ef4 r5:c0b0cc90 r4:fe44200c [ 2.897443] [<c02087f0>] (gic_handle_irq) from [<c020dc74>] (__irq_svc+0x34/0x44) [ 2.904914] Exception stack(0xc0b05ef4 to 0xc0b05f3c) [ 2.909960] 5ee0: 00000000 c0b14794 c0b147e0 [ 2.918128] 5f00: 0000004c 9124abbd 00000000 97aca8b6 00000000 00000001 eb1a2c18 c0b04000 [ 2.926296] 5f20: c0b05f68 c0b05f3c c0b05f3c c06a7b20 c06a7b2c 60000113 ffffffff [ 2.933679] r7:c0b05f28 r6:ffffffff r5:60000113 r4:c06a7b2c [ 2.939378] [<c06a7ab4>] (cpuidle_enter_state) from [<c06a7cf8>] (cpuidle_enter+0x3c/0x48) [ 2.947627] r9:00000000 r8:c0b14794 r7:eb1a2c18 r6:00000001 r5:eb1a2c18 r4:c0b14794 [ 2.955421] [<c06a7cbc>] (cpuidle_enter) from [<c02648a0>] (cpu_startup_entry+0x21c/0x240) [ 2.963670] r6:c0b0c818 r5:c0b04000 r4:c0b0c884 [ 2.968320] [<c0264684>] (cpu_startup_entry) from [<c080cad4>] (rest_init+0x7c/0x80) [ 2.976049] r7:c0ad7710 [ 2.978601] [<c080ca58>] (rest_init) from [<c0a72b80>] (start_kernel+0x350/0x35c) [ 2.986077] [<c0a72830>] (start_kernel) from [<80208074>] (0x80208074) [ 2.992604] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 2.992604] ~$off # PYBOOT: Exception: panic ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.512537] [<c023ba24>] (get_signal_to_deliver) from [<c020c560>] (do_signal+0x114/0x440) [ 2.520787] r10:00000000 r9:bea6b950 r8:b6f0d15c r7:eac65ecc r6:eac6400c r5:b6f0d158 [ 2.528647] r4:eac65fb0 [ 2.531194] [<c020c44c>] (do_signal) from [<c020ca14>] (do_work_pending+0x84/0xbc) [ 2.538751] r10:00000000 r9:eac64000 r8:c0209ac4 r7:eac65fb0 r6:c0209ac4 r5:eac64000 [ 2.546610] r4:eac64010 [ 2.549156] [<c020c990>] (do_work_pending) from [<c0209960>] (work_pending+0xc/0x20) [ 2.556884] r7:00900000 r6:b6f1adc8 r5:b6f1b978 r4:b6f1b958 [ 2.562577] CPU0: stopping [ 2.565292] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-08898-gf79922c #1 [ 2.572501] Backtrace: [ 2.574970] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 2.582528] r6:00000000 r5:00000000 r4:c0b21e5c [ 2.587182] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 2.594411] [<c0811818>] (dump_stack) from [<c020fce4>] (handle_IPI+0x150/0x17c) [ 2.601793] r5:c0b01adc r4:00000000 [ 2.605388] [<c020fb94>] (handle_IPI) from [<c020885c>] (gic_handle_irq+0x6c/0x70) [ 2.612945] r6:c0b05ec0 r5:c0b0cc90 r4:fe44010c [ 2.617589] [<c02087f0>] (gic_handle_irq) from [<c020dc74>] (__irq_svc+0x34/0x44) [ 2.625060] Exception stack(0xc0b05ec0 to 0xc0b05f08) [ 2.630114] 5ec0: 00000000 c0b1416c c0b1416c 0000004c 97b478b8 00000000 987dd398 00000000 [ 2.638287] 5ee0: 00000000 eb1c2c18 eaff1124 c0b05f34 c0b05f08 c0b05f08 c06a7b20 c06a7b2c [ 2.646452] 5f00: 60000113 ffffffff [ 2.649933] r7:c0b05ef4 r6:ffffffff r5:60000113 r4:c06a7b2c [ 2.655632] [<c06a7ab4>] (cpuidle_enter_state) from [<c06a9954>] (cpuidle_enter_state_coupled+0x12c/0x388) [ 2.665268] r9:eaff1100 r8:c0b04000 r7:c0b1416c r6:00000000 r5:eb1c2c18 r4:ffff0000 [ 2.673052] [<c06a9828>] (cpuidle_enter_state_coupled) from [<c06a7d00>] (cpuidle_enter+0x44/0x48) [ 2.681994] r10:c0b04000 r9:00000000 r8:c0b1416c r7:eb1c2c18 r6:00000001 r5:eb1c2c18 [ 2.689853] r4:c0b1416c [ 2.692407] [<c06a7cbc>] (cpuidle_enter) from [<c02648a0>] (cpu_startup_entry+0x21c/0x240) [ 2.700657] r6:c0b0c818 r5:c0b04000 r4:c0b0c884 [ 2.705305] [<c0264684>] (cpu_startup_entry) from [<c080cad4>] (rest_init+0x7c/0x80) [ 2.713033] r7:c0ad7710 [ 2.715587] [<c080ca58>] (rest_init) from [<c0a72b80>] (start_kernel+0x350/0x35c) [ 2.723066] [<c0a72830>] (start_kernel) from [<00208074>] (0x208074) [ 2.729411] drm_kms_helper: panic occurred, switching back to text console [ 2.736316] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 2.736316] ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- OK Loading Device Tree to 5ffef000, end 5ffffed3 ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 1,681,923 1,581,923 board_init_f 1,731,623 49,700 board_init_r 1,733,832 2,209 board_init 1,864,774 130,942 board_init_done 1,945,328 80,554 id=64 1,950,758 5,430 main_loop 3,133,289 1,182,531 usb_start 6,080,894 2,947,605 tftp_start 6,080,912 18 id=80 6,080,914 2 eth_start 20,661,943 14,581,029 id=81 20,662,026 83 id=82 20,662,031 5 id=84 20,662,033 2 tftp_done 24,666,750 4,004,717 bootm_start 24,666,758 8 id=1 24,746,787 80,029 id=2 24,746,806 19 id=3 25,734,284 987,478 id=4 25,734,286 2 id=5 25,734,298 12 id=6 26,726,572 992,274 id=7 26,726,575 3 id=8 26,726,588 13 id=15 27,323,330 596,742 start_kernel Accumulated time: 142,310 lcd Stashed 27 records ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2922.228189] r7:eac7c004 [ 2922.230713] [<c022eb64>] (do_exit) from [<c0230354>] (do_group_exit+0x48/0xcc) [ 2922.237911] r7:eac7c004 [ 2922.240436] [<c023030c>] (do_group_exit) from [<c023bbd4>] (get_signal_to_deliver+0x1b0/0x5bc) [ 2922.247638] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1100000 [ 2922.247645] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 2922.262997] r7:eac7c004 r6:eac7dee0 r5:eac80000 r4:00000004 [ 2922.268646] [<c023ba24>] (get_signal_to_deliver) from [<c020c560>] (do_signal+0x114/0x440) [ 2922.276884] r10:00000000 r9:bed8c950 r8:b6f9c15c r7:eac7decc r6:eac7c00c r5:b6f9c158 [ 2922.284696] r4:eac7dfb0 [ 2922.287220] [<c020c44c>] (do_signal) from [<c020ca14>] (do_work_pending+0x84/0xbc) [ 2922.294766] r10:00000000 r9:eac7c000 r8:c0209ac4 r7:eac7dfb0 r6:c0209ac4 r5:eac7c000 [ 2922.302577] r4:eac7c010 [ 2922.305101] [<c020c990>] (do_work_pending) from [<c0209960>] (work_pending+0xc/0x20) [ 2922.312820] r7:00900000 r6:b6fa9dc8 r5:b6faa978 r4:b6faa958 [ 2922.318468] CPU0: stopping [ 2922.321157] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-08898-gf79922c #1 [ 2922.328356] Backtrace: [ 2922.330796] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 2922.338340] r6:00000000 r5:00000000 r4:c0b21e5c [ 2922.342948] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 2922.350152] [<c0811818>] (dump_stack) from [<c020fce4>] (handle_IPI+0x150/0x17c) [ 2922.357522] r5:c0b01adc r4:00000000 [ 2922.361087] [<c020fb94>] (handle_IPI) from [<c020885c>] (gic_handle_irq+0x6c/0x70) [ 2922.368632] r6:c0b05f30 r5:c0b0cc90 r4:f000200c [ 2922.373239] [<c02087f0>] (gic_handle_irq) from [<c020dc74>] (__irq_svc+0x34/0x44) [ 2922.380699] Exception stack(0xc0b05f30 to 0xc0b05f78) [ 2922.385735] 5f20: ffffffed 00000000 ffffffed c021a540 [ 2922.393895] 5f40: c0b0c884 c0b04000 c0b0c818 00000000 00000000 00000000 c0b04000 c0b05f84 [ 2922.402053] 5f60: c0b05f88 c0b05f78 c020a58c c020a590 60000113 ffffffff [ 2922.408647] r7:c0b05f64 r6:ffffffff r5:60000113 r4:c020a590 [ 2922.414299] [<c020a550>] (arch_cpu_idle) from [<c0264890>] (cpu_startup_entry+0x20c/0x240) [ 2922.422542] [<c0264684>] (cpu_startup_entry) from [<c080cad4>] (rest_init+0x7c/0x80) [ 2922.430260] r7:c0ad7710 [ 2922.432785] [<c080ca58>] (rest_init) from [<c0a72b80>] (start_kernel+0x350/0x35c) [ 2922.440247] [<c0a72830>] (start_kernel) from [<40208074>] (0x40208074) [ 2922.446760] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 2922.446760] ~$off # PYBOOT: Exception: panic ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- [ 48.933624] [<c080e4f8>] (panic) from [<c022f47c>] (complete_and_exit+0x0/0x24) [ 48.940917] r3:eac04400 r2:00000000 r1:00000004 r0:c099cc54 [ 48.946594] r7:eac60004 [ 48.949127] [<c022eb64>] (do_exit) from [<c0230354>] (do_group_exit+0x48/0xcc) [ 48.956359] r7:eac60004 [ 48.958892] [<c023030c>] (do_group_exit) from [<c023bbd4>] (get_signal_to_deliver+0x1b0/0x5bc) [ 48.967498] r7:eac60004 r6:eac61ee0 r5:eac64000 r4:00000004 [ 48.973175] [<c023ba24>] (get_signal_to_deliver) from [<c020c560>] (do_signal+0x114/0x440) [ 48.981445] r10:00000000 r9:beb1b950 r8:b6fb815c r7:eac61ecc r6:eac6000c r5:b6fb8158 [ 48.989288] r4:eac61fb0 [ 48.991821] [<c020c44c>] (do_signal) from [<c020ca14>] (do_work_pending+0x84/0xbc) [ 48.999389] r10:00000000 r9:eac60000 r8:c0209ac4 r7:eac61fb0 r6:c0209ac4 r5:eac60000 [ 49.007232] r4:eac60010 [ 49.009765] [<c020c990>] (do_work_pending) from [<c0209960>] (work_pending+0xc/0x20) [ 49.017486] r7:00900000 r6:b6fc5dc8 r5:b6fc6978 r4:b6fc6958 [ 49.023193] CPU0: stopping [ 49.025878] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-08898-gf79922c #1 [ 49.033111] Backtrace: [ 49.035552] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 49.043121] r6:00000000 r5:00000000 r4:c0b21e5c [ 49.047760] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 49.054992] [<c0811818>] (dump_stack) from [<c020fce4>] (handle_IPI+0x150/0x17c) [ 49.062377] r5:c0b01adc r4:00000000 [ 49.065948] [<c020fb94>] (handle_IPI) from [<c020885c>] (gic_handle_irq+0x6c/0x70) [ 49.073516] r6:c0b05f30 r5:c0b0cc90 r4:fa41010c [ 49.078155] [<c02087f0>] (gic_handle_irq) from [<c020dc74>] (__irq_svc+0x34/0x44) [ 49.085632] Exception stack(0xc0b05f30 to 0xc0b05f78) [ 49.090667] 5f20: ffffffed 00000000 ffffffed c021a540 [ 49.098846] 5f40: c0b0c884 c0b04000 c0b0c818 00000000 00000000 00000000 c0b04000 c0b05f84 [ 49.107025] 5f60: c0b05f88 c0b05f78 c020a58c c020a590 60000013 ffffffff [ 49.113616] r7:c0b05f64 r6:ffffffff r5:60000013 r4:c020a590 [ 49.119293] [<c020a550>] (arch_cpu_idle) from [<c0264890>] (cpu_startup_entry+0x20c/0x240) [ 49.127563] [<c0264684>] (cpu_startup_entry) from [<c080cad4>] (rest_init+0x7c/0x80) [ 49.135314] r7:c0ad7710 [ 49.137847] [<c080ca58>] (rest_init) from [<c0a72b80>] (start_kernel+0x350/0x35c) [ 49.145324] [<c0a72830>] (start_kernel) from [<00208074>] (0x208074) [ 49.151672] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 49.151672] ~$off # PYBOOT: Exception: panic ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.637329] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.645263] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.657196] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.664489] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675964] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.684509] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.696411] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.703735] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.715209] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.723022] HS USB OTG: no transceiver configured [ 3.727752] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.735595] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.743530] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755432] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.762756] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774230] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.782745] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794677] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802001] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813476] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821289] HS USB OTG: no transceiver configured [ 3.825988] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.833831] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.841766] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853698] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.861022] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872497] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881011] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.892944] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.900238] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911743] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919525] HS USB OTG: no transceiver configured [ 3.924255] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932098] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940002] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.951934] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.959228] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970733] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 4.730718] r7:eac64004 [ 4.733319] [<c023030c>] (do_group_exit) from [<c023bbd4>] (get_signal_to_deliver+0x1b0/0x5bc) [ 4.741930] r7:eac64004 r6:eac65ee0 r5:eac68000 r4:00000004 [ 4.747682] [<c023ba24>] (get_signal_to_deliver) from [<c020c560>] (do_signal+0x114/0x440) [ 4.755948] r10:00000000 r9:bebd4960 r8:b6f8315c r7:eac65ecc r6:eac6400c r5:b6f83158 [ 4.763859] r4:eac65fb0 [ 4.766438] [<c020c44c>] (do_signal) from [<c020ca14>] (do_work_pending+0x84/0xbc) [ 4.774010] r10:00000000 r9:eac64000 r8:c0209ac4 r7:eac65fb0 r6:c0209ac4 r5:eac64000 [ 4.781917] r4:eac64010 [ 4.784493] [<c020c990>] (do_work_pending) from [<c0209960>] (work_pending+0xc/0x20) [ 4.792238] r7:00900000 r6:b6f90dc8 r5:b6f91978 r4:b6f91958 [ 4.797984] CPU0: stopping [ 4.800728] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-08898-gf79922c #1 [ 4.807954] Backtrace: [ 4.810463] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 4.818036] r6:00000000 r5:00000000 r4:c0b21e5c [ 4.822745] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 4.830009] [<c0811818>] (dump_stack) from [<c020fce4>] (handle_IPI+0x150/0x17c) [ 4.837408] r5:c0b01adc r4:00000000 [ 4.841043] [<c020fb94>] (handle_IPI) from [<c020885c>] (gic_handle_irq+0x6c/0x70) [ 4.848615] r6:c0b05ef4 r5:c0b0cc90 r4:fe44010c [ 4.853303] [<c02087f0>] (gic_handle_irq) from [<c020dc74>] (__irq_svc+0x34/0x44) [ 4.860793] Exception stack(0xc0b05ef4 to 0xc0b05f3c) [ 4.865861] 5ee0: 00000000 c0b1416c c0b1416c [ 4.874057] 5f00: 0000004c 1a969b08 00000001 1dc36158 00000001 00000000 eb1c6c18 c0b04000 [ 4.882253] 5f20: c0b05f68 c0b05f3c c0b05f3c c06a7b20 c06a7b2c 60000113 ffffffff [ 4.889650] r7:c0b05f28 r6:ffffffff r5:60000113 r4:c06a7b2c [ 4.895394] [<c06a7ab4>] (cpuidle_enter_state) from [<c06a7cf8>] (cpuidle_enter+0x3c/0x48) [ 4.903656] r9:00000000 r8:c0b1416c r7:eb1c6c18 r6:00000000 r5:eb1c6c18 r4:c0b1416c [ 4.911517] [<c06a7cbc>] (cpuidle_enter) from [<c02648a0>] (cpu_startup_entry+0x21c/0x240) [ 4.919782] r6:c0b0c818 r5:c0b04000 r4:c0b0c884 [ 4.924475] [<c0264684>] (cpu_startup_entry) from [<c080cad4>] (rest_init+0x7c/0x80) [ 4.932219] r7:c0ad7710 [ 4.934808] [<c080ca58>] (rest_init) from [<c0a72b80>] (start_kernel+0x350/0x35c) [ 4.942314] [<c0a72830>] (start_kernel) from [<00208074>] (0x208074) [ 4.948677] drm_kms_helper: panic occurred, switching back to text console [ 4.955632] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 4.955632] ~$off # PYBOOT: Exception: panic ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.998630] 7f20: 00000000 c0b12e14 c0b12e14 0000004c 61dd2180 00000000 6a1368db [ 2.006818] 7f40: 00000000 00000000 eb1b7c18 eac96000 eac97f98 eac97f6c eac97f6c c06a7b20 [ 2.015004] 7f60: c06a7b2c 60000113 ffffffff [ 2.019281] r7:eac97f58 r6:ffffffff r5:60000113 r4:c06a7b2c [ 2.025030] [<c06a7ab4>] (cpuidle_enter_state) from [<c06a7cf8>] (cpuidle_enter+0x3c/0x48) [ 2.033300] r9:00000000 r8:c0b12e14 r7:eb1b7c18 r6:00000000 r5:eb1b7c18 r4:c0b12e14 [ 2.041155] [<c06a7cbc>] (cpuidle_enter) from [<c02648a0>] (cpu_startup_entry+0x21c/0x240) [ 2.049425] r6:c0b0c818 r5:eac96000 r4:c0b0c884 [ 2.054115] [<c0264684>] (cpu_startup_entry) from [<c020f93c>] (secondary_start_kernel+0x140/0x14c) [ 2.063166] r7:c0ba41d4 [ 2.065730] [<c020f7fc>] (secondary_start_kernel) from [<102089a4>] (0x102089a4) [ 2.073130] r5:00000015 r4:3ac8406a [ 2.076751] CPU0: stopping [ 2.079474] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-08898-gf79922c #1 [ 2.086703] Backtrace: [ 2.089189] [<c020ce10>] (dump_backtrace) from [<c020d0e0>] (show_stack+0x18/0x1c) [ 2.096766] r6:00000000 r5:00000000 r4:c0b21e5c [ 2.101457] [<c020d0c8>] (show_stack) from [<c08118a8>] (dump_stack+0x90/0xa0) [ 2.108687] [<c0811818>] (dump_stack) from [<c020fce4>] (handle_IPI+0x150/0x17c) [ 2.116089] r5:c0b01adc r4:00000000 [ 2.119697] [<c020fb94>] (handle_IPI) from [<c020885c>] (gic_handle_irq+0x6c/0x70) [ 2.127273] r6:c0b05ef4 r5:c0b0cc90 r4:f400010c [ 2.131952] [<c02087f0>] (gic_handle_irq) from [<c020dc74>] (__irq_svc+0x34/0x44) [ 2.139442] Exception stack(0xc0b05ef4 to 0xc0b05f3c) [ 2.144504] 5ee0: 00000000 c0b12e14 c0b12e14 [ 2.152693] 5f00: 0000004c 61dc48f1 00000000 6a136890 00000000 00000000 eb1afc18 c0b04000 [ 2.160882] 5f20: c0b05f68 c0b05f3c c0b05f3c c06a7b20 c06a7b2c 60000113 ffffffff [ 2.168284] r7:c0b05f28 r6:ffffffff r5:60000113 r4:c06a7b2c [ 2.174030] [<c06a7ab4>] (cpuidle_enter_state) from [<c06a7cf8>] (cpuidle_enter+0x3c/0x48) [ 2.182300] r9:00000000 r8:c0b12e14 r7:eb1afc18 r6:00000000 r5:eb1afc18 r4:c0b12e14 [ 2.190154] [<c06a7cbc>] (cpuidle_enter) from [<c02648a0>] (cpu_startup_entry+0x21c/0x240) [ 2.198423] r6:c0b0c818 r5:c0b04000 r4:c0b0c884 [ 2.203114] [<c0264684>] (cpu_startup_entry) from [<c080cad4>] (rest_init+0x7c/0x80) [ 2.210862] r7:c0ad7710 [ 2.213435] [<c080ca58>] (rest_init) from [<c0a72b80>] (start_kernel+0x350/0x35c) [ 2.220932] [<c0a72830>] (start_kernel) from [<10208074>] (0x10208074) [ 2.227472] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 2.227472] ~$off # PYBOOT: Exception: panic

11 years, 5 months

arm-soc build: 47 warnings 0 failures (arm-soc/v3.15-8898-gf79922c)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: f79922c ARM: EXYNOS: Fix compilation warning Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.15-8898-gf79922c/ Runtime: 45m 59s Passed: 126 Failed: 0 Warnings: 47 Section mismatches: 16 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 11 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 11 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3cccc): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x740c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4064): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x4f98c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3cc88): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x4f688): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

arm-soc boot: 27 boots: 27 pass, 0 fail (v3.15-8902-gafa9c74)

by Kevin's boot bot

Tree/Branch: arm-soc Git describe: v3.15-8902-gafa9c74 Full Report =========== arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS imx6q-wandboard 0 min 14.2 sec: PASS arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 12.7 sec: PASS exynos5410-smdk5410 0 min 28.9 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 56.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS ste-snowball 1 min 14.3 sec: PASS tegra30-beaver 0 min 20.8 sec: PASS omap3-n900 0 min 15.6 sec: PASS qcom-apq8074-dragonboard 0 min 18.6 sec: PASS bcm28155-ap 0 min 25.8 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 49.2 sec: PASS exynos5420-arndale-octa 0 min 41.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS omap5-uevm 1 min 44.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.2 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 39.3 sec: PASS

11 years, 5 months

arm-soc boot: 45 boots: 17 pass, 28 fail (v3.15-8898-gf79922c)

by Kevin's boot bot

Tree/Branch: arm-soc Git describe: v3.15-8898-gf79922c Failed boot tests (console logs at the end) =========================================== tegra124-jetson-tk1: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y legacy,3730xm: FAIL: arm-omap2plus_defconfig legacy,n900: FAIL: arm-omap2plus_defconfig legacy,3730storm: FAIL: arm-omap2plus_defconfig legacy,3530beagle: FAIL: arm-omap2plus_defconfig legacy,3530overo: FAIL: arm-omap2plus_defconfig tegra124-jetson-tk1: FAIL: arm-multi_v7_defconfig ste-snowball: FAIL: arm-multi_v7_defconfig tegra30-beaver: FAIL: arm-multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig qcom-apq8074-dragonboard: FAIL: arm-multi_v7_defconfig sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig exynos5420-arndale-octa: FAIL: arm-multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig bcm28155-ap: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: arm-multi_v7_defconfig exynos5410-smdk5410: FAIL: arm-multi_v7_defconfig armada-370-mirabox: FAIL: arm-multi_v7_defconfig imx6q-wandboard: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: arm-multi_v7_defconfig exynos5250-arndale: FAIL: arm-multi_v7_defconfig qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y armada-370-mirabox: FAIL: arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.0 sec: PASS da850-evm 0 min 15.0 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 43.5 sec: FAIL armada-xp-openblocks-ax3-4 0 min 51.2 sec: FAIL sun7i-a20-cubieboard2 0 min 39.9 sec: FAIL arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.0 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 1 min 7.2 sec: FAIL legacy,n900 0 min 33.5 sec: FAIL legacy,3730storm 0 min 44.1 sec: FAIL legacy,3530beagle 0 min 59.7 sec: FAIL legacy,3530overo 0 min 46.2 sec: FAIL arm-multi_v7_defconfig ---------------------- tegra124-jetson-tk1 0 min 44.9 sec: FAIL ste-snowball 1 min 11.9 sec: FAIL tegra30-beaver 0 min 16.1 sec: FAIL sun7i-a20-cubieboard2 0 min 12.3 sec: FAIL qcom-apq8074-dragonboard 0 min 17.6 sec: FAIL sun4i-a10-cubieboard 0 min 12.2 sec: FAIL exynos5420-arndale-octa 0 min 39.8 sec: FAIL armada-xp-openblocks-ax3-4 0 min 23.6 sec: FAIL bcm28155-ap 0 min 25.0 sec: FAIL imx6dl-wandboard,wand-solo 0 min 14.9 sec: FAIL exynos5410-smdk5410 0 min 29.9 sec: FAIL armada-370-mirabox 0 min 25.6 sec: FAIL imx6q-wandboard 0 min 12.9 sec: FAIL imx6dl-wandboard,wand-dual 0 min 14.9 sec: FAIL exynos5250-arndale 2 min 30.0 sec: FAIL arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.8 sec: PASS sun4i-a10-cubieboard 0 min 11.3 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.1 sec: FAIL arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.9 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.5 sec: FAIL exynos5250-arndale 0 min 30.0 sec: PASS exynos5410-smdk5410 0 min 27.1 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS imx6q-wandboard 0 min 14.2 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 51.3 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.2 sec: FAIL armada-370-mirabox 0 min 19.5 sec: FAIL arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.4 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1: FAIL: last 40 lines of boot log: ----------------------------------------------------- ###################################################### 2.8 MiB/s done Bytes transferred = 4600120 (463138 hex) Tegra124 (Jetson TK1) # tftp 0x83000000 192.168.1.2:buildroot.cpio.gz tftp 0x83000000 192.168.1.2:buildroot.cpio.gz Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.189 Filename 'buildroot.cpio.gz'. Load address: 0x83000000 Loading: *############################################ 2.8 MiB/s done Bytes transferred = 642538 (9cdea hex) Tegra124 (Jetson TK1) # tftp 0x82000000 192.168.1.2:tmp/jetson-cJpfV0/tmpn_AwQu.dtb tftp 0x82000000 192.168.1.2:tmp/jetson-cJpfV0/tmpn_AwQu.dtb Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.189 Filename 'tmp/jetson-cJpfV0/tmpn_AwQu.dtb'. Load address: 0x82000000 Loading: *### 2.6 MiB/s done Bytes transferred = 42852 (a764 hex) Tegra124 (Jetson TK1) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk ip=::::::none:192.168.1.254 Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x463138 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200d763 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.47 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ Filename 'tmp/obsax3-kEeBao/tmpg_2n_E-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4615450 (466d1a hex) openblocks> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz tftp 0x03000000 192.168.1.2:buildroot.cpio.gz Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'buildroot.cpio.gz'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642538 (9cdea hex) openblocks> printenv bootargs printenv bootargs ## Error: "bootargs" not defined openblocks> bootm 0x02000000 - bootm 0x02000000 - ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-06-13 17:46:28 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4615386 Bytes = 4.4 MiB Load Address: 02000000 Entry Point: 02000040 Verifying Checksum ... OK XIP Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 51.19 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: ------------------------------------------------------- ###################################################### 2.7 MiB/s done Bytes transferred = 4600120 (463138 hex) sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz tftp 0x43000000 192.168.1.2:buildroot.cpio.gz Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'buildroot.cpio.gz'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642538 (9cdea hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-fy99ys/tmpjYfgMO.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-fy99ys/tmpjYfgMO.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-fy99ys/tmpjYfgMO.dtb'. Load address: 0x42000000 Loading: *## 2.5 MiB/s done Bytes transferred = 20825 (5159 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=::::::none:192.168.1.254 sun7i# bootz 0x41000000 - 0x42000000 bootz 0x41000000 - 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x463138 ] ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42008158 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.86 seconds. # PYBOOT: Result: FAIL arm-omap2plus_defconfig ----------------------- legacy,3730xm: FAIL: last 40 lines of boot log: ----------------------------------------------- TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-hY4kHJ/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################ 454.1 KiB/s done Bytes transferred = 3796832 (39ef60 hex) OMAP3 beagleboard.org # tftp 0x82000000 192.168.1.2:tmp/3730xm-hY4kHJ/buildroot.cpio.gzb5qLIB.uboot tftp 0x82000000 192.168.1.2:tmp/3730xm-hY4kHJ/buildroot.cpio.gzb5qLIB.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-hY4kHJ/buildroot.cpio.gzb5qLIB.uboot'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 80.1 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk ip=::::::none:192.168.1.254 OMAP3 beagleboard.org # bootz 0x80200000 0x82000000 bootz 0x80200000 0x82000000 ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: buildroot.cpio.gz Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 67.15 seconds. # PYBOOT: Result: FAIL legacy,n900: FAIL: last 40 lines of boot log: --------------------------------------------- [ 0.847] SETUP: WR STD DEVICE SET_CONFIGURATION value 0001 index 0000 length 0000 [ 0.855] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 03, index 0409, length 255 bytes) [ 0.865] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 0.876] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 0.886] SETUP: WR STD INTERFACE SET_INTERFACE value 0000 index 0002 length 0000 [ 0.895] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 1.284] SETUP: WR STD INTERFACE SET_INTERFACE value 0001 index 0002 length 0000 [ 1.292] Flashing interface selected [ 1.296] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 1.306] SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 [ 1.313] Flashing mode entered [ 1.316] SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 [ 1.324] SETUP: RD VND DEVICE req 04 value 0000 index 0000 length 0200 [ 1.332] SETUP: RD VND DEVICE req 03 value 0000 index 0000 length 0004 [ 1.339] SETUP: WR VND DEVICE req 12 value 0000 index 0000 length 0012 [ 1.347] SETUP: RD VND DEVICE req 14 value 0000 index 0000 length 0200 [ 1.355] SETUP: WR VND DEVICE req 42 value 0000 index 0000 length 002d [ 1.362] Image 'kernel' won't fit to the partition, still loading it (3796864 bytes, while maximum is 2097152 bytes) [ 1.373] Receiving kernel (length 3796864) USB device found found at bus 002, device address 077. NOLO version 1.4.10 Version of 'sw-release': <no version> Found device RX-51, hardware revision 0010 Sending kernel image (3707 kB)... 3% (128 of 3707 kB, 4740 kB/s) 6% (256 of 3707 kB, 6400 kB/s) 10% (384 of 3707 kB, 7384 kB/s) 13% (512 of 3707 kB, 7876 kB/s) 17% (640 of 3707 kB, 8311 kB/s) 20% (768 of 3707 kB, 8533 kB/s) 24% (896 of 3707 kB, 8784 kB/s) 27% (1024 of 3707 kB, 8982 kB/s) 31% (1152 of 3707 kB, 9070 kB/s) 34% (1280 of 3707 kB, 9208 kB/s) 37% (1408 of 3707 kB, 9324 kB/s) 41% (1536 of 3707 kB, 9423 kB/s) 44% (1664 of 3707 kB, 9454 kB/s) 48% (1792 of 3707 kB, 9531 kB/s) 51% (1920 of 3707 kB, 9365 kB/s) 55% (2048 of 3707 kB, 9351 kB/s) 58% (2176 of 3707 kB, 9379 kB/s) 62% (2304 of 3707 kB, 9365 kB/s) 65% (2432 of 3707 kB, 9389 kB/s) 69% (2560 of 3707 kB, 9411 kB/s) 72% (2688 of 3707 kB, 9431 kB/s) 75% (2816 of 3707 kB, 9449 kB/s) 79% (2944 of 3707 kB, 9435 kB/s) 82% (3072 of 3707 kB, 9452 kB/s) 86% (3200 of 3707 kB, 9467 kB/s) 89% (3328 of 3707 kB, 9481 kB/s) 93% (3456 of 3707 kB, 9468 kB/s) 96% (3584 of 3707 kB, 9481 kB/s)100% (3707 of 3707 kB, 9483 kB/s)100% (3707 of 3707 kB, avg. 9483 kB/s) [ 1.753] Image successfully received [ 1.854] SETUP: WR VND DEVICE req 82 value 0000 index 0000 length 0055 [ 1.862] SETUP: WR STD INTERFACE SET_INTERFACE value 0000 index 0002 length 0000 Using kernel command line: "console=ttyO2,115200n8 debug earlyprintk rw rootwait root=/dev/mmcblk0p2 init=/bin/sh" ['/home/khilman/bin/fastboot.py', 'n900', 'tmp/n900-SUSoEP/zImage', 'None', 'None'] /home/khilman/bin/fastboot.py n900 tmp/n900-SUSoEP/zImage None None TFTP: download kernel (tmp/n900-SUSoEP/zImage) to /tmp/kernel-ix8KuT Deleting /tmp/kernel-ix8KuT [ 1.916] Boot requested (normal mode) Kernel command line: console=ttyO2,115200n8 debug earlyprintk rw rootwait root=/dev/mmcblk0p2 init=/bin/sh [ 1.930] Serial console enabled ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.49 seconds. # PYBOOT: Result: FAIL legacy,3730storm: FAIL: last 40 lines of boot log: -------------------------------------------------- setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 DHCP client bound to address 192.168.1.195 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3730storm-MxT235/zImage tftp 0x80200000 192.168.1.2:tmp/3730storm-MxT235/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-MxT235/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################ 2.2 MiB/s done Bytes transferred = 3796832 (39ef60 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=::::::none:192.168.1.254 Overo # bootz 0x80200000 bootz 0x80200000 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.07 seconds. # PYBOOT: Result: FAIL legacy,3530beagle: FAIL: last 40 lines of boot log: --------------------------------------------------- TFTP from server 192.168.1.2; our IP address is 192.168.1.191 Filename 'tmp/3530beagle-pYen3z/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################ 322.3 KiB/s done Bytes transferred = 3796832 (39ef60 hex) OMAP3 beagleboard.org #tftp 0x82000000 192.168.1.2:tmp/3530beagle-pYen3z/buildroot.cpio.gzHos8Ml.uboot tftp 0x82000000 192.168.1.2:tmp/3530beagle-pYen3z/buildroot.cpio.gzHos8Ml.uboot Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.191 Filename 'tmp/3530beagle-pYen3z/buildroot.cpio.gzHos8Ml.uboot'. Load address: 0x82000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=::::::none:192.168.1.254 OMAP3 beagleboard.org # bootz 0x80200000 0x82000000 bootz 0x80200000 0x82000000 Kernel image @ 0x80200000 [ 0x000000 - 0x39ef60 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: buildroot.cpio.gz Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.74 seconds. # PYBOOT: Result: FAIL legacy,3530overo: FAIL: last 40 lines of boot log: -------------------------------------------------- Filename 'tmp/3530overo-kUxv3s/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################ 2.1 MiB/s done Bytes transferred = 3796832 (39ef60 hex) Overo # tftp 0x82000000 192.168.1.2:tmp/3530overo-kUxv3s/buildroot.cpio.gzGpTTwt.uboot tftp 0x82000000 192.168.1.2:tmp/3530overo-kUxv3s/buildroot.cpio.gzGpTTwt.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-kUxv3s/buildroot.cpio.gzGpTTwt.uboot'. Load address: 0x82000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug ip=::::::none:192.168.1.254 Overo # bootz 0x80200000 0x82000000 bootz 0x80200000 0x82000000 ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: buildroot.cpio.gz Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 46.24 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig ---------------------- tegra124-jetson-tk1: FAIL: last 40 lines of boot log: ----------------------------------------------------- [ 3.184347] r6:eac6dcfc r5:c0afac90 r4:fe44200c [ 3.188997] [<c02087d4>] (gic_handle_irq) from [<c020d374>] (__irq_svc+0x34/0x44) [ 3.196467] Exception stack(0xeac6dcfc to 0xeac6dd44) [ 3.201511] dce0: c0b93980 [ 3.209681] dd00: 00000000 ffff17f9 00000000 00000282 0000001b 00000000 eac6c000 00000000 [ 3.217848] dd20: 418004fc eac80000 eac6dd80 0000000a eac6dd44 c02308b8 c0230928 20000113 [ 3.226012] dd40: ffffffff [ 3.228715] r7:eac6dd30 r6:ffffffff r5:20000113 r4:c0230928 [ 3.234417] [<c02308a0>] (__do_softirq) from [<c0230d34>] (irq_exit+0xa8/0xf8) [ 3.241627] r10:eac80000 r9:418004fc r8:00000000 r7:fe442000 r6:00000000 r5:0000001b [ 3.249501] r4:eac6c000 [ 3.252046] [<c0230c8c>] (irq_exit) from [<c020a1d8>] (handle_IRQ+0x44/0x9c) [ 3.259081] r4:c0af0adc [ 3.261625] [<c020a194>] (handle_IRQ) from [<c0208810>] (gic_handle_irq+0x3c/0x74) [ 3.269181] r6:eac6ddd4 r5:c0afac90 r4:fe44200c [ 3.273829] [<c02087d4>] (gic_handle_irq) from [<c020d374>] (__irq_svc+0x34/0x44) [ 3.281301] Exception stack(0xeac6ddd4 to 0xeac6de1c) [ 3.286345] ddc0: 00000051 60000093 c0b08c98 [ 3.294514] dde0: c0b08c98 c0b934ec c0987598 eac80000 00000000 00000000 418004fc eac80000 [ 3.302679] de00: eac6de30 eac6dd50 eac6de1c c0269dc8 c07f9e88 60000013 ffffffff [ 3.310062] r7:eac6de08 r6:ffffffff r5:60000013 r4:c07f9e88 [ 3.315764] [<c07f9cec>] (panic) from [<c022ecc4>] (do_exit+0x824/0x8c4) [ 3.322454] r3:eac04400 r2:00000000 r1:00000004 r0:c0987598 [ 3.328148] r7:ea550000 [ 3.330697] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 3.337907] r7:eac6c000 [ 3.340456] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 3.349053] r7:eac6c000 r6:eac6dee0 r5:eac6c000 r4:eac88000 [ 3.354759] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 3.362921] r10:b6f2fe74 r9:eac6c000 r8:b6f2fe78 r7:00000000 r6:eac6c000 r5:00000000 [ 3.370794] r4:eac6dfb0 [ 3.373342] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 3.380898] r10:00000000 r8:eac6dfb0 r7:c0209a64 r6:eac6c000 r5:eac6c000 r4:ffffffff [ 3.388776] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 3.396506] r8:c0209a64 r7:00900000 r6:b6f3bf74 r5:00000000 r4:ffffffff [ 3.403253] ---[ end trace 03393cf29f96489a ]--- ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 44.89 seconds. # PYBOOT: Result: FAIL ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 48.645111] r7:ea5728c0 [ 48.647644] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 48.654846] r7:eac60000 [ 48.657379] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 48.665985] r7:eac60000 r6:eac61ee0 r5:eac60000 r4:eac64000 [ 48.671661] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 48.679840] r10:b6f00e74 r9:eac60000 r8:b6f00e78 r7:00000000 r6:eac60000 r5:00000000 [ 48.687683] r4:eac61fb0 [ 48.690216] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 48.697784] r10:00000000 r8:eac61fb0 r7:c0209a64 r6:eac60000 r5:eac60000 r4:ffffffff [ 48.705627] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 48.713348] r8:c0209a64 r7:00900000 r6:b6f0cf74 r5:00000000 r4:ffffffff [ 48.720092] CPU1: stopping [ 48.722778] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-08898-gf79922c #1 [ 48.730010] Backtrace: [ 48.732452] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 48.740020] r6:00000000 r5:c0b921ac r4:00000000 [ 48.744659] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 48.751861] [<c07fc2c8>] (dump_stack) from [<c020f3d4>] (handle_IPI+0x140/0x17c) [ 48.759246] r4:00000001 [ 48.761779] [<c020f294>] (handle_IPI) from [<c0208840>] (gic_handle_irq+0x6c/0x74) [ 48.769348] r6:eac81f6c r5:c0afac90 r4:fa41010c [ 48.773986] [<c02087d4>] (gic_handle_irq) from [<c020d374>] (__irq_svc+0x34/0x44) [ 48.781463] Exception stack(0xeac81f6c to 0xeac81fb4) [ 48.786499] 1f60: ffffffed 00000000 ffffffed c0219b00 eac80000 [ 48.794677] 1f80: c0afa884 c0afa818 00000000 00000000 00000000 eac80000 eac81fc0 eac81fc4 [ 48.802825] 1fa0: eac81fb4 c020a514 c020a518 60000113 ffffffff [ 48.808654] r7:eac81fa0 r6:ffffffff r5:60000113 r4:c020a518 [ 48.814331] [<c020a4e0>] (arch_cpu_idle) from [<c026255c>] (cpu_startup_entry+0x1ec/0x22c) [ 48.822601] [<c0262370>] (cpu_startup_entry) from [<c020f020>] (secondary_start_kernel+0x124/0x144) [ 48.831634] r7:c0b921d4 [ 48.834167] [<c020eefc>] (secondary_start_kernel) from [<00208984>] (0x208984) [ 48.841369] r5:00000015 r4:2ac6806a [ 48.844970] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 48.844970] [ 48.854919] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 71.88 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 40 lines of boot log: ------------------------------------------------ [ 4.752352] r6:eac73cfc r5:c0afac90 r4:fe44010c [ 4.756972] [<c02087d4>] (gic_handle_irq) from [<c020d374>] (__irq_svc+0x34/0x44) [ 4.764435] Exception stack(0xeac73cfc to 0xeac73d44) [ 4.769470] 3ce0: c0b93980 [ 4.777629] 3d00: 00000000 ffff18d7 00000000 00000202 0000001d 00000000 eac72000 00000000 [ 4.785787] 3d20: 418004fc eac80000 eac73d80 0000000a eac73d44 c02308b8 c0230928 20000113 [ 4.793942] 3d40: ffffffff [ 4.796636] r7:eac73d30 r6:ffffffff r5:20000113 r4:c0230928 [ 4.802303] [<c02308a0>] (__do_softirq) from [<c0230d34>] (irq_exit+0xa8/0xf8) [ 4.809505] r10:eac80000 r9:418004fc r8:00000000 r7:fe440100 r6:00000000 r5:0000001d [ 4.817340] r4:eac72000 [ 4.819869] [<c0230c8c>] (irq_exit) from [<c020a1d8>] (handle_IRQ+0x44/0x9c) [ 4.826897] r4:c0af0adc [ 4.829426] [<c020a194>] (handle_IRQ) from [<c0208810>] (gic_handle_irq+0x3c/0x74) [ 4.836974] r6:eac73dd4 r5:c0afac90 r4:fe44010c [ 4.841596] [<c02087d4>] (gic_handle_irq) from [<c020d374>] (__irq_svc+0x34/0x44) [ 4.849058] Exception stack(0xeac73dd4 to 0xeac73e1c) [ 4.854095] 3dc0: 00000051 60000093 c0b08c98 [ 4.862254] 3de0: c0b08c98 c0b934ec c0987598 eac80000 00000000 00000000 418004fc eac80000 [ 4.870411] 3e00: eac73e30 eac73d50 eac73e1c c0269dc8 c07f9e88 60000013 ffffffff [ 4.877786] r7:eac73e08 r6:ffffffff r5:60000013 r4:c07f9e88 [ 4.883452] [<c07f9cec>] (panic) from [<c022ecc4>] (do_exit+0x824/0x8c4) [ 4.890134] r3:eac04400 r2:00000000 r1:00000004 r0:c0987598 [ 4.895795] r7:eaf38700 [ 4.898326] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 4.905528] r7:eac72000 [ 4.908059] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 4.916647] r7:eac72000 r6:eac73ee0 r5:eac72000 r4:eac88000 [ 4.922317] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 4.930472] r10:b6f49e74 r9:eac72000 r8:b6f49e78 r7:00000000 r6:eac72000 r5:00000000 [ 4.938307] r4:eac73fb0 [ 4.940838] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 4.948386] r10:00000000 r8:eac73fb0 r7:c0209a64 r6:eac72000 r5:eac72000 r4:ffffffff [ 4.956225] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 4.963948] r8:c0209a64 r7:00900000 r6:b6f55f74 r5:00000000 r4:ffffffff [ 4.970657] ---[ end trace 27ef46a270c9cb0d ]--- ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 16.06 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: ------------------------------------------------------- [ 1.628896] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.635630] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.643503] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.705111] hub 4-0:1.0: USB hub found [ 1.708950] hub 4-0:1.0: 1 port detected [ 1.713512] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:07 UTC (7) [ 1.725366] vcc3v0: disabling [ 1.728474] ALSA device list: [ 1.731470] No soundcards found. [ 1.775277] ata1: SATA link down (SStatus 0 SControl 300) [ 1.781327] Freeing unused kernel memory: 568K (c0a63000 - c0af1000) [ 1.788616] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.788616] [ 1.797755] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 1.804534] Backtrace: [ 1.807011] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 1.814569] r6:eac64000 r5:c0987598 r4:00000000 [ 1.819226] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 1.826441] [<c07fc2c8>] (dump_stack) from [<c07f9d80>] (panic+0x98/0x224) [ 1.833305] r4:c0b934ec [ 1.835853] [<c07f9cec>] (panic) from [<c022ecc4>] (do_exit+0x824/0x8c4) [ 1.842543] r3:eac04600 r2:00000000 r1:00000004 r0:c0987598 [ 1.848242] r7:ea4628c0 [ 1.850790] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 1.858000] r7:eac56000 [ 1.860550] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 1.869146] r7:eac56000 r6:eac57ee0 r5:eac56000 r4:eac68000 [ 1.874854] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 1.883017] r10:b6f1de74 r9:eac56000 r8:b6f1de78 r7:00000000 r6:eac56000 r5:00000000 [ 1.890896] r4:eac57fb0 [ 1.893444] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 1.901000] r10:00000000 r8:eac57fb0 r7:c0209a64 r6:eac56000 r5:eac56000 r4:ffffffff [ 1.908886] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 1.916616] r8:c0209a64 r7:00900000 r6:b6f29f74 r5:00000000 r4:ffffffff [ 1.923374] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.923374] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 12.28 seconds. # PYBOOT: Result: FAIL qcom-apq8074-dragonboard: FAIL: last 40 lines of boot log: ---------------------------------------------------------- [ 1.441092] r6:c0af3f3c r5:c0afac90 r4:f000200c [ 1.452894] [<c02087d4>] (gic_handle_irq) from [<c020d374>] (__irq_svc+0x34/0x44) [ 1.453246] Exception stack(0xc0af3f3c to 0xc0af3f84) [ 1.460708] 3f20: ffffffed [ 1.465750] 3f40: 00000000 ffffffed c0219b00 c0af2000 c0afa884 c0afa818 00000000 00000000 [ 1.473908] 3f60: 00000000 c0af2000 c0af3f90 c0af3f94 c0af3f84 c020a514 c020a518 60000113 [ 1.482065] 3f80: ffffffff [ 1.490215] r7:c0af3f70 r6:ffffffff r5:60000113 r4:c020a518 [ 1.498208] [<c020a4e0>] (arch_cpu_idle) from [<c026255c>] (cpu_startup_entry+0x1ec/0x22c) [ 1.498567] [<c0262370>] (cpu_startup_entry) from [<c07f7c8c>] (rest_init+0x68/0x80) [ 1.506717] r7:c0ac7178 [ 1.516789] [<c07f7c24>] (rest_init) from [<c0a63b14>] (start_kernel+0x2ec/0x348) [ 1.517052] [<c0a63828>] (start_kernel) from [<00208074>] (0x208074) [ 1.524513] CPU2: stopping [ 1.530938] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.15.0-08898-gf79922c #1 [ 1.533452] Backtrace: [ 1.543008] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 1.543177] r6:00000000 r5:c0b921ac r4:00000000 [ 1.554983] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 1.555341] [<c07fc2c8>] (dump_stack) from [<c020f3d4>] (handle_IPI+0x140/0x17c) [ 1.562447] r4:00000002 [ 1.572169] [<c020f294>] (handle_IPI) from [<c0208840>] (gic_handle_irq+0x6c/0x74) [ 1.572430] r6:eac91f6c r5:c0afac90 r4:f000200c [ 1.584233] [<c02087d4>] (gic_handle_irq) from [<c020d374>] (__irq_svc+0x34/0x44) [ 1.584583] Exception stack(0xeac91f6c to 0xeac91fb4) [ 1.592050] 1f60: ffffffed 00000000 ffffffed c0219b00 eac90000 [ 1.597090] 1f80: c0afa884 c0afa818 00000000 00000000 00000000 eac90000 eac91fc0 eac91fc4 [ 1.605248] 1fa0: eac91fb4 c020a514 c020a518 60000013 ffffffff [ 1.613398] r7:eac91fa0 r6:ffffffff r5:60000013 r4:c020a518 [ 1.624515] [<c020a4e0>] (arch_cpu_idle) from [<c026255c>] (cpu_startup_entry+0x1ec/0x22c) [ 1.624875] [<c0262370>] (cpu_startup_entry) from [<c020f020>] (secondary_start_kernel+0x124/0x144) [ 1.633022] r7:c0b921d4 [ 1.644390] [<c020eefc>] (secondary_start_kernel) from [<00208984>] (0x208984) [ 1.644650] r5:00000015 r4:2ac7c06a [ 1.655065] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.655065] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 17.63 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------ [ 1.564068] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.570768] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.578648] ohci-platform 1c1c400.usb: irq 23, io mem 0x01c1c400 [ 1.640426] hub 4-0:1.0: USB hub found [ 1.644253] hub 4-0:1.0: 1 port detected [ 1.648737] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:07 UTC (1262304007) [ 1.661545] vcc3v0: disabling [ 1.664630] ALSA device list: [ 1.667630] No soundcards found. [ 1.720708] ata1: SATA link down (SStatus 0 SControl 300) [ 1.726735] Freeing unused kernel memory: 568K (c0a63000 - c0af1000) [ 1.733884] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.733884] [ 1.743016] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 1.749794] Backtrace: [ 1.752269] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 1.759827] r6:eac58000 r5:c0987598 r4:00000000 [ 1.764480] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 1.771697] [<c07fc2c8>] (dump_stack) from [<c07f9d80>] (panic+0x98/0x224) [ 1.778561] r4:c0b934ec [ 1.781112] [<c07f9cec>] (panic) from [<c022ecc4>] (do_exit+0x824/0x8c4) [ 1.787801] r3:eac03800 r2:00000000 r1:00000004 r0:c0987598 [ 1.793498] r7:eaff08c0 [ 1.796045] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 1.803255] r7:eac4a000 [ 1.805808] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 1.814405] r7:eac4a000 r6:eac4bee0 r5:eac4a000 r4:eac5c000 [ 1.820116] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 1.828279] r10:b6f5de74 r9:eac4a000 r8:b6f5de78 r7:00000000 r6:eac4a000 r5:00000000 [ 1.836157] r4:eac4bfb0 [ 1.838704] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 1.846261] r10:00000000 r8:eac4bfb0 r7:c0209a64 r6:eac4a000 r5:eac4a000 r4:ffffffff [ 1.854145] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 1.861875] r8:c0209a64 r7:00900000 r6:b6f69f74 r5:00000000 r4:ffffffff [ 1.868634] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.868634] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 12.22 seconds. # PYBOOT: Result: FAIL exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 15.792277] mmcblk0boot1: unknown partition table [ 15.795686] PVDD_HSIC_1V8: disabling [ 15.801311] mmcblk0boot0: unknown partition table [ 15.804716] PVDD_ABB_1V8: disabling [ 15.809927] PVDD_ANAIP_1V8: disabling [ 15.816066] PVDD_ANAIP_1V0: disabling [ 15.819812] PVDD_ADC_1V8: disabling [ 15.823080] PVDD_APIO_1V8: disabling [ 15.827331] ALSA device list: [ 15.828852] No soundcards found. [ 15.834339] Freeing unused kernel memory: 568K (c0a63000 - c0af1000) [ 15.848556] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 15.848556] [ 15.856204] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 15.862957] Backtrace: [ 15.865397] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 15.872922] r6:eac98000 r5:c0987598 r4:00000000 [ 15.877525] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 15.884713] [<c07fc2c8>] (dump_stack) from [<c07f9d80>] (panic+0x98/0x224) [ 15.891552] r4:c0b934ec [ 15.894075] [<c07f9cec>] (panic) from [<c022ecc4>] (do_exit+0x824/0x8c4) [ 15.900738] r3:eac04600 r2:00000000 r1:00000004 r0:c0987598 [ 15.906370] r7:eaf388c0 [ 15.908892] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 15.916075] r7:eac86000 [ 15.918600] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 15.927167] r7:eac86000 r6:eac87ee0 r5:eac86000 r4:eaca8000 [ 15.932811] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 15.940945] r10:b6f52e74 r9:eac86000 r8:b6f52e78 r7:00000000 r6:eac86000 r5:00000000 [ 15.948744] r4:eac87fb0 [ 15.951266] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 15.958796] r10:00000000 r8:eac87fb0 r7:c0209a64 r6:eac86000 r5:eac86000 r4:ffffffff [ 15.966601] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 15.974307] r8:c0209a64 r7:00900000 r6:b6f5ef74 r5:00000000 r4:ffffffff [ 15.980991] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 15.980991] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 39.81 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ [ 2.554535] r7:eaf741c0 [ 2.557089] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 2.564328] r7:eac4e000 [ 2.566887] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 2.575518] r7:eac4e000 r6:eac4fee0 r5:eac4e000 r4:eac58000 [ 2.581248] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 2.589445] r10:b6f49e74 r9:eac4e000 r8:b6f49e78 r7:00000000 r6:eac4e000 r5:00000000 [ 2.597354] r4:eac4ffb0 [ 2.599908] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 2.607496] r10:00000000 r8:eac4ffb0 r7:c0209a64 r6:eac4e000 r5:eac4e000 r4:ffffffff [ 2.615410] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 2.623171] r8:c0209a64 r7:00900000 r6:b6f55f74 r5:00000000 r4:ffffffff [ 2.629953] CPU1: stopping [ 2.632671] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-08898-gf79922c #1 [ 2.639910] Backtrace: [ 2.642380] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 2.649968] r6:00000000 r5:c0b921ac r4:00000000 [ 2.654632] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 2.661877] [<c07fc2c8>] (dump_stack) from [<c020f3d4>] (handle_IPI+0x140/0x17c) [ 2.669290] r4:00000001 [ 2.671844] [<c020f294>] (handle_IPI) from [<c02086bc>] (armada_370_xp_handle_irq+0xb0/0xc8) [ 2.680302] r6:c0bbe7c8 r5:00000001 r4:00000005 [ 2.684969] [<c020860c>] (armada_370_xp_handle_irq) from [<c020d374>] (__irq_svc+0x34/0x44) [ 2.693341] Exception stack(0xeac77f7c to 0xeac77fc4) [ 2.698406] 7f60: ffffffed [ 2.706607] 7f80: 00000000 ffffffed c0219be4 eac76000 c0afa884 c0afa818 00000000 00000000 [ 2.714807] 7fa0: 00000000 eac76000 eac77fdc eac77fc4 eac77fc4 c020a514 c026255c 60000113 [ 2.723004] 7fc0: ffffffff [ 2.725717] r10:eac76000 r9:00000000 r8:00000000 r7:eac77fb0 r6:ffffffff r5:60000113 [ 2.733625] r4:c026255c [ 2.736184] [<c0262370>] (cpu_startup_entry) from [<c020f020>] (secondary_start_kernel+0x124/0x144) [ 2.745252] r7:c0b921d4 [ 2.747804] [<c020eefc>] (secondary_start_kernel) from [<00208984>] (0x208984) [ 2.755044] r5:00000015 r4:2ac6006a [ 2.758655] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 2.758655] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 23.61 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 40 lines of boot log: --------------------------------------------- [ 0.825000] NET: Registered protocol family 29 [ 0.825000] can: raw protocol (rev 20120528) [ 0.830000] can: broadcast manager protocol (rev 20120528 t) [ 0.835000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.840000] Key type dns_resolver registered [ 0.840000] ThumbEE CPU extension supported. [ 0.845000] Registering SWP/SWPB emulation handler [ 0.850000] /home/buildslave/workspace/khilman-kbuilder/arm-soc/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.855000] ALSA device list: [ 0.855000] No soundcards found. [ 0.860000] Freeing unused kernel memory: 568K (c0a63000 - c0af1000) [ 0.865000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 0.865000] [ 0.865000] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 0.865000] Backtrace: [ 0.865000] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 0.865000] r6:eac60000 r5:c0987598 r4:00000000 [ 0.865000] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 0.865000] [<c07fc2c8>] (dump_stack) from [<c07f9d80>] (panic+0x98/0x224) [ 0.865000] r4:c0b934ec [ 0.865000] [<c07f9cec>] (panic) from [<c022ecc4>] (do_exit+0x824/0x8c4) [ 0.865000] r3:eac03400 r2:00000000 r1:00000004 r0:c0987598 [ 0.865000] r7:eadd58c0 [ 0.865000] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 0.865000] r7:eac52000 [ 0.865000] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 0.865000] r7:eac52000 r6:eac53ee0 r5:eac52000 r4:eac64000 [ 0.865000] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 0.865000] r10:b6efee74 r9:eac52000 r8:b6efee78 r7:00000000 r6:eac52000 r5:00000000 [ 0.865000] r4:eac53fb0 [ 0.865000] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 0.865000] r10:00000000 r8:eac53fb0 r7:c0209a64 r6:eac52000 r5:eac52000 r4:ffffffff [ 0.865000] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 0.865000] r8:c0209a64 r7:00900000 r6:b6f0af74 r5:00000000 r4:ffffffff [ 0.865000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 0.865000] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 25.04 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 40 lines of boot log: ------------------------------------------------------------ [ 1.367586] NET: Registered protocol family 29 [ 1.372074] can: raw protocol (rev 20120528) [ 1.376377] can: broadcast manager protocol (rev 20120528 t) [ 1.382073] can: netlink gateway (rev 20130117) max_hops=1 [ 1.387939] Key type dns_resolver registered [ 1.392396] ThumbEE CPU extension supported. [ 1.396716] Registering SWP/SWPB emulation handler [ 1.404603] /home/buildslave/workspace/khilman-kbuilder/arm-soc/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.422174] ALSA device list: [ 1.425160] No soundcards found. [ 1.429571] Freeing unused kernel memory: 568K (c0a63000 - c0af1000) [ 1.438750] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.438750] [ 1.447905] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 1.454692] Backtrace: [ 1.457180] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 1.464756] r6:db468000 r5:c0987598 r4:00000000 [ 1.469423] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 1.476649] [<c07fc2c8>] (dump_stack) from [<c07f9d80>] (panic+0x98/0x224) [ 1.483527] r4:c0b934ec [ 1.486086] [<c07f9cec>] (panic) from [<c022ecc4>] (do_exit+0x824/0x8c4) [ 1.492792] r3:db404400 r2:00000000 r1:00000004 r0:c0987598 [ 1.498505] r7:dac7c8c0 [ 1.501049] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 1.508275] r7:db45a000 [ 1.510828] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 1.519436] r7:db45a000 r6:db45bee0 r5:db45a000 r4:db46c000 [ 1.525172] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 1.533345] r10:b6f5be74 r9:db45a000 r8:b6f5be78 r7:00000000 r6:db45a000 r5:00000000 [ 1.541253] r4:db45bfb0 [ 1.543802] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 1.551375] r10:00000000 r8:db45bfb0 r7:c0209a64 r6:db45a000 r5:db45a000 r4:ffffffff [ 1.559293] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 1.567040] r8:c0209a64 r7:00900000 r6:b6f67f74 r5:00000000 r4:ffffffff [ 1.573812] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.573812] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 14.94 seconds. # PYBOOT: Result: FAIL exynos5410-smdk5410: FAIL: last 40 lines of boot log: ----------------------------------------------------- [ 7.460076] NET: Registered protocol family 29 [ 7.463775] can: raw protocol (rev 20120528) [ 7.467961] can: broadcast manager protocol (rev 20120528 t) [ 7.473673] can: netlink gateway (rev 20130117) max_hops=1 [ 7.480068] Key type dns_resolver registered [ 7.483381] ThumbEE CPU extension supported. [ 7.487642] Registering SWP/SWPB emulation handler [ 7.494653] /home/buildslave/workspace/khilman-kbuilder/arm-soc/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 7.522336] ALSA device list: [ 7.523920] No soundcards found. [ 7.531290] Freeing unused kernel memory: 568K (c0a63000 - c0af1000) [ 7.543711] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 7.543711] [ 7.551384] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 7.558142] Backtrace: [ 7.560581] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 7.568114] r6:eac70000 r5:c0987598 r4:00000000 [ 7.572716] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 7.579911] [<c07fc2c8>] (dump_stack) from [<c07f9d80>] (panic+0x98/0x224) [ 7.586758] r4:c0b934ec [ 7.589280] [<c07f9cec>] (panic) from [<c022ecc4>] (do_exit+0x824/0x8c4) [ 7.595951] r3:eac04600 r2:00000000 r1:00000004 r0:c0987598 [ 7.601587] r7:eae4e700 [ 7.604107] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 7.611300] r7:eac5c000 [ 7.613823] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 7.622400] r7:eac5c000 r6:eac5dee0 r5:eac5c000 r4:eac78000 [ 7.628044] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 7.636188] r10:b6f20e74 r9:eac5c000 r8:b6f20e78 r7:00000000 r6:eac5c000 r5:00000000 [ 7.643992] r4:eac5dfb0 [ 7.646513] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 7.654052] r10:00000000 r8:eac5dfb0 r7:c0209a64 r6:eac5c000 r5:eac5c000 r4:ffffffff [ 7.661861] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 7.669574] r8:c0209a64 r7:00900000 r6:b6f2cf74 r5:00000000 r4:ffffffff [ 7.676276] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 7.676276] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 29.91 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- [ 1.551717] NET: Registered protocol family 29 [ 1.556194] can: raw protocol (rev 20120528) [ 1.560489] can: broadcast manager protocol (rev 20120528 t) [ 1.566202] can: netlink gateway (rev 20130117) max_hops=1 [ 1.572019] Key type dns_resolver registered [ 1.576418] ThumbEE CPU extension supported. [ 1.580725] Registering SWP/SWPB emulation handler [ 1.587585] rtc-mv d0010300.rtc: setting system clock to 2014-06-12 23:58:24 UTC (1402617504) [ 1.596819] ALSA device list: [ 1.599817] No soundcards found. [ 1.603956] Freeing unused kernel memory: 568K (c0a63000 - c0af1000) [ 1.613088] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.613088] [ 1.622249] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 1.629048] Backtrace: [ 1.631527] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 1.639109] r6:eac4c000 r5:c0987598 r4:00000000 [ 1.643774] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 1.651013] [<c07fc2c8>] (dump_stack) from [<c07f9d80>] (panic+0x98/0x224) [ 1.657897] r4:c0b934ec [ 1.660456] [<c07f9cec>] (panic) from [<c022ecc4>] (do_exit+0x824/0x8c4) [ 1.667167] r3:eac03600 r2:00000000 r1:00000004 r0:c0987598 [ 1.672880] r7:eada48c0 [ 1.675433] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 1.682666] r7:eac50000 [ 1.685227] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 1.693851] r7:eac50000 r6:eac51ee0 r5:eac50000 r4:eac54000 [ 1.699578] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 1.707769] r10:b6fd1e74 r9:eac50000 r8:b6fd1e78 r7:00000000 r6:eac50000 r5:00000000 [ 1.715669] r4:eac51fb0 [ 1.718221] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 1.725802] r10:00000000 r8:eac51fb0 r7:c0209a64 r6:eac50000 r5:eac50000 r4:ffffffff [ 1.733707] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 1.741462] r8:c0209a64 r7:00900000 r6:b6fddf74 r5:00000000 r4:ffffffff [ 1.748237] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.748237] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 25.64 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 40 lines of boot log: ------------------------------------------------- [ 1.849179] bf60: eac9bf78 eac9bf78 c0698610 c069861c 60000013 ffffffff [ 1.855799] r7:eac9bf64 r6:ffffffff r5:60000013 r4:c069861c [ 1.861539] [<c06985a4>] (cpuidle_enter_state) from [<c06987f8>] (cpuidle_enter+0x3c/0x48) [ 1.869810] r10:eac9a000 r8:c0b00e14 r7:eb1bfc18 r6:00000001 r5:eb1bfc18 r4:c0b00e14 [ 1.877751] [<c06987bc>] (cpuidle_enter) from [<c02624ec>] (cpu_startup_entry+0x17c/0x22c) [ 1.886022] r6:c0afa818 r5:c0afa884 r4:eac9a000 [ 1.890711] [<c0262370>] (cpu_startup_entry) from [<c020f020>] (secondary_start_kernel+0x124/0x144) [ 1.899762] r7:c0b921d4 [ 1.902327] [<c020eefc>] (secondary_start_kernel) from [<10208984>] (0x10208984) [ 1.909729] r5:00000015 r4:3ac7c06a [ 1.913351] CPU3: stopping [ 1.916076] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.15.0-08898-gf79922c #1 [ 1.923308] Backtrace: [ 1.925792] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 1.933369] r6:00000000 r5:c0b921ac r4:00000000 [ 1.938057] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 1.945294] [<c07fc2c8>] (dump_stack) from [<c020f3d4>] (handle_IPI+0x140/0x17c) [ 1.952696] r4:00000003 [ 1.955260] [<c020f294>] (handle_IPI) from [<c0208840>] (gic_handle_irq+0x6c/0x74) [ 1.962836] r6:eac9df30 r5:c0afac90 r4:f400010c [ 1.967523] [<c02087d4>] (gic_handle_irq) from [<c020d374>] (__irq_svc+0x34/0x44) [ 1.975014] Exception stack(0xeac9df30 to 0xeac9df78) [ 1.980076] df20: 00000000 c0b00e14 c0b00e60 0000004c [ 1.988265] df40: 5cc03b33 00000000 608bebaf 00000000 00000001 eb1c7c1c eb1c7c18 eac9dfa4 [ 1.996453] df60: eac9df78 eac9df78 c0698610 c069861c 60000113 ffffffff [ 2.003074] r7:eac9df64 r6:ffffffff r5:60000113 r4:c069861c [ 2.008821] [<c06985a4>] (cpuidle_enter_state) from [<c06987f8>] (cpuidle_enter+0x3c/0x48) [ 2.017092] r10:eac9c000 r8:c0b00e14 r7:eb1c7c18 r6:00000001 r5:eb1c7c18 r4:c0b00e14 [ 2.025034] [<c06987bc>] (cpuidle_enter) from [<c02624ec>] (cpu_startup_entry+0x17c/0x22c) [ 2.033305] r6:c0afa818 r5:c0afa884 r4:eac9c000 [ 2.037994] [<c0262370>] (cpu_startup_entry) from [<c020f020>] (secondary_start_kernel+0x124/0x144) [ 2.047045] r7:c0b921d4 [ 2.049610] [<c020eefc>] (secondary_start_kernel) from [<10208984>] (0x10208984) [ 2.057011] r5:00000015 r4:3ac7c06a [ 2.060640] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 2.060640] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 12.91 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 40 lines of boot log: ------------------------------------------------------------ [ 1.560359] r7:ea4bc700 [ 1.562913] [<c022e4a0>] (do_exit) from [<c022ee94>] (do_group_exit+0x44/0xcc) [ 1.570140] r7:eac5e000 [ 1.572708] [<c022ee50>] (do_group_exit) from [<c023a1a4>] (get_signal_to_deliver+0x174/0x58c) [ 1.581324] r7:eac5e000 r6:eac5fee0 r5:eac5e000 r4:eac70000 [ 1.587071] [<c023a030>] (get_signal_to_deliver) from [<c07f98c8>] (do_signal+0xb4/0x3d0) [ 1.595245] r10:b6f69e74 r9:eac5e000 r8:b6f69e78 r7:00000000 r6:eac5e000 r5:00000000 [ 1.603139] r4:eac5ffb0 [ 1.605689] [<c07f9814>] (do_signal) from [<c020c194>] (do_work_pending+0x8c/0xcc) [ 1.613262] r10:00000000 r8:eac5ffb0 r7:c0209a64 r6:eac5e000 r5:eac5e000 r4:ffffffff [ 1.621172] [<c020c108>] (do_work_pending) from [<c0209900>] (work_pending+0xc/0x20) [ 1.628920] r8:c0209a64 r7:00900000 r6:b6f75f74 r5:00000000 r4:ffffffff [ 1.635707] CPU0: stopping [ 1.638423] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-08898-gf79922c #1 [ 1.645653] Backtrace: [ 1.648126] [<c020c6b0>] (dump_backtrace) from [<c020c848>] (show_stack+0x18/0x1c) [ 1.655701] r6:00000000 r5:c0b921ac r4:00000000 [ 1.660388] [<c020c830>] (show_stack) from [<c07fc348>] (dump_stack+0x80/0x9c) [ 1.667626] [<c07fc2c8>] (dump_stack) from [<c020f3d4>] (handle_IPI+0x140/0x17c) [ 1.675027] r4:00000000 [ 1.677593] [<c020f294>] (handle_IPI) from [<c0208840>] (gic_handle_irq+0x6c/0x74) [ 1.685169] r6:c0af3f3c r5:c0afac90 r4:f400010c [ 1.689851] [<c02087d4>] (gic_handle_irq) from [<c020d374>] (__irq_svc+0x34/0x44) [ 1.697341] Exception stack(0xc0af3f3c to 0xc0af3f84) [ 1.702400] 3f20: ffffffed [ 1.710588] 3f40: 00000000 ffffffed c0219b00 c0af2000 c0afa884 c0afa818 00000000 00000000 [ 1.718767] 3f60: 00000000 c0af2000 c0af3f90 c0af3f94 c0af3f84 c020a514 c020a518 60000013 [ 1.726949] 3f80: ffffffff [ 1.729663] r7:c0af3f70 r6:ffffffff r5:60000013 r4:c020a518 [ 1.735413] [<c020a4e0>] (arch_cpu_idle) from [<c026255c>] (cpu_startup_entry+0x1ec/0x22c) [ 1.743693] [<c0262370>] (cpu_startup_entry) from [<c07f7c8c>] (rest_init+0x68/0x80) [ 1.751442] r7:c0ac7178 [ 1.753999] [<c07f7c24>] (rest_init) from [<c0a63b14>] (start_kernel+0x2ec/0x348) [ 1.761496] [<c0a63828>] (start_kernel) from [<10208074>] (0x10208074) [ 1.768040] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.768040] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 14.92 seconds. # PYBOOT: Result: FAIL exynos5250-arndale: FAIL: last 40 lines of boot log: ---------------------------------------------------- [ 1.218512] usbcore: registered new interface driver usbhid [ 1.223133] usbhid: USB HID core driver [ 1.230301] TCP: cubic registered [ 1.232148] NET: Registered protocol family 17 [ 1.236613] can: controller area network core (rev 20120528 abi 9) [ 1.242965] NET: Registered protocol family 29 [ 1.247164] can: raw protocol (rev 20120528) [ 1.251430] can: broadcast manager protocol (rev 20120528 t) [ 1.257078] can: netlink gateway (rev 20130117) max_hops=1 [ 1.262830] Key type dns_resolver registered [ 1.266905] ThumbEE CPU extension supported. [ 1.271058] Registering SWP/SWPB emulation handler [ 1.276827] platform 122f0000.sata: Driver ahci requests probe deferral [ 1.283379] input: gpio_keys as /devices/gpio_keys/input/input0 [ 1.288560] /home/buildslave/workspace/khilman-kbuilder/arm-soc/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.308541] platform 122f0000.sata: Driver ahci requests probe deferral [ 1.308561] hdmi-en: disabling [ 1.308568] MAIN_DC: disabling [ 1.309352] ALSA device list: [ 1.309356] No soundcards found. [ 1.317913] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1225000 [ 1.317919] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 1.326147] mmc0: BKOPS_EN bit is not set [ 1.344706] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.344930] Freeing unused kernel memory: 568K (c0a63000 - c0af1000) [ 1.360388] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.370017] mmc0: new DDR MMC card at address 0001 [ 1.375029] mmcblk0: mmc0:0001 M4G1FA 3.72 GiB [ 1.379336] mmcblk0boot0: mmc0:0001 M4G1FA partition 1 1.00 MiB [ 1.385236] mmcblk0boot1: mmc0:0001 M4G1FA partition 2 1.00 MiB [ 1.391134] mmcblk0rpmb: mmc0:0001 M4G1FA partition 3 128 KiB [ 1.398098] mmcblk0: p1 p2 p3 p4 [ 1.401954] mmcblk0boot1: unknown partition table [ 1.406302] mmcblk0boot0: unknown partition table [ 1.410637] platform 122f0000.sata: Driver ahci requests probe deferral [ 1.417900] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1300000 ~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 150.01 seconds. # PYBOOT: Result: FAIL arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard: FAIL: last 40 lines of boot log: ---------------------------------------------------------- [ 1.514346] 7fc0: c06d88ec c09b31fc 00000020 ee097fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.522514] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.530673] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.538134] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.546200] CPU3: stopping [ 1.553055] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-08898-gf79922c #1 [ 1.555680] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.563925] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.571817] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.578846] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.586398] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.593767] Exception stack(0xee099f98 to 0xee099fe0) [ 1.601319] 9f80: 00000003 c0851740 [ 1.606360] 9fa0: 00000048 00000000 ee098000 ee098000 ee098000 c09b31fc c097246c 512f06f0 [ 1.614519] 9fc0: c06d88ec c09b31fc 00000020 ee099fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.622688] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.630844] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.638308] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.646373] CPU0: stopping [ 1.653224] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.15.0-08898-gf79922c #1 [ 1.655845] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.664090] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.671983] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.679014] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.686566] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.693939] Exception stack(0xc096bf60 to 0xc096bfa8) [ 1.701491] bf60: 00000000 c0851740 000001e8 00000000 c096a000 c096a000 c096a000 c09b31fc [ 1.706530] bf80: c097246c 512f06f0 c06d88ec c09b31fc 00000000 c096bfa8 c020fc90 c020fc94 [ 1.714686] bfa0: 60000113 ffffffff [ 1.722847] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.726150] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.733789] [<c025866c>] (cpu_startup_entry) from [<c091caa8>] (start_kernel+0x2e8/0x344) [ 1.741862] [<c091caa8>] (start_kernel) from [<00208074>] (0x208074) [ 1.750108] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.750108] ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 # PYBOOT: Time: 17.10 seconds. # PYBOOT: Result: FAIL arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 16.240913] mmcblk0: p1 p2 p3 p4 [ 16.244081] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00bc088 [ 16.251619] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.256555] Modules linked in: [ 16.259592] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-08898-gf79922c #1 [ 16.268174] Workqueue: kmmcd mmc_rescan [ 16.271981] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.277359] PC is at rescan_partitions+0xb4/0x290 [ 16.282032] LR is at 0xf00bc000 [ 16.285154] pc : [<c01afcd8>] lr : [<f00bc000>] psr: 20000113 [ 16.285154] sp : ef0b5c80 ip : 00000000 fp : 00000000 [ 16.296590] r10: 00000000 r9 : ef2cb140 r8 : ed5eb200 [ 16.301789] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.308288] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.314788] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.322067] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.327786] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.334111] Stack: (0xef0b5c80 to 0xef0b6000) [ 16.338447] 5c80: c054c214 00000001 ef0b4000 c0387150 00000001 c05284f8 ed5b7598 c05283c8 [ 16.346592] 5ca0: eec24380 ed5b7468 eec24330 eec24280 00000000 ed5b7468 00000000 00000000 [ 16.354737] 5cc0: 00000000 eec24280 ed5eb200 eec24290 00000001 00000000 00000000 c00e305c [ 16.362882] 5ce0: c00e19fc 00000000 00000000 00000001 eec24280 00000000 ed5eb270 ed5eb20c [ 16.371028] 5d00: 00000000 ed5b7380 00000003 c00e32c0 c052a6cc 00000001 00000003 c0388418 [ 16.379173] 5d20: c052a6cc c00e1fcc ef0b5d34 c02222ec ed5eb240 00000001 eec24280 ed5eb200 [ 16.387319] 5d40: ed5eb270 ed5eb20c 00000000 ed5b7380 00000003 c01adbf0 c01aca44 ed5eb200 [ 16.395465] 5d60: 00000080 0b300000 00000002 ef309000 ef30a400 ef30d000 ef30d000 ef30d2bc [ 16.403610] 5d80: c02baca8 ef30a400 ef30d000 ef30a588 ef0b5dd6 c02bbbac 00000056 ef30a46c [ 16.411755] 5da0: 00000003 ef309000 ef30a400 c02bc7dc 00000003 ef0b5dd6 00000008 ed5e5708 [ 16.419901] 5dc0: c0469eec ef30d298 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 16.428046] 5de0: 00000001 ef30a408 c058de1c 00000000 c054c19c 00000001 00000000 c054be48 [ 16.436192] 5e00: ef013c00 c02b112c c02b1114 c0225d90 00000000 ef30a408 c0225f40 ef30a808 [ 16.444337] 5e20: 00000000 c022456c ef2d9698 ed511fc4 ef30a408 ef30a43c c054bd68 c0225c6c [ 16.452483] 5e40: ef30a408 ef30a408 c054bd68 c02253dc ef30a408 00000000 ef30a410 c0223a44 [ 16.460629] 5e60: ef013c00 c0381094 c047d090 ef0b5e84 00061a80 ef30a400 ef30a408 c047d03c [ 16.468774] 5e80: 00061a80 c03b10ac 00000000 c02b154c c047d03c c0451f2c c047cff8 00000001 [ 16.476919] 5ea0: ef30a800 00000000 ef30a800 c02b3f98 00061a80 40ff8080 00000000 ef30a9ec [ 16.~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.48 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.497222] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.505065] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.513092] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.525024] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.532318] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.543823] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.552429] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.564361] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.571685] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.583160] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.591003] HS USB OTG: no transceiver configured [ 3.595703] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.603546] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.611572] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.623474] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.630798] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.642272] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.650909] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.662841] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.670135] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.681610] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.689422] HS USB OTG: no transceiver configured [ 3.694152] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.701995] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.710021] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.721954] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.729248] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.740722] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.749359] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.761291] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.768585] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.780090] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.787902] HS USB OTG: no transceiver configured [ 3.792602] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.800445] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.808471] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 111.29 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ [ 2.494308] input: soc:internal-regs:gpio_keys as /devices/soc/soc:internal-regs/soc:internal-regs:gpio_keys/input/input0 [ 2.505466] /home/buildslave/workspace/khilman-kbuilder/arm-soc/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.517356] ALSA device list: [ 2.520346] No soundcards found. [ 2.524421] Freeing unused kernel memory: 568K (c0a69000 - c0af7000) Illegal instruction [ 2.536046] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 2.536046] [ 2.545212] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 2.552017] Backtrace: [ 2.554493] [<c020c6e0>] (dump_backtrace) from [<c020c878>] (show_stack+0x18/0x1c) [ 2.562088] [<c020c860>] (show_stack) from [<c0802ae4>] (dump_stack+0x80/0x9c) [ 2.569331] [<c0802a64>] (dump_stack) from [<c0800540>] (panic+0x98/0x224) [ 2.576232] [<c08004ac>] (panic) from [<c022eee0>] (do_exit+0x824/0x8c4) [ 2.582954] [<c022e6bc>] (do_exit) from [<c022f0b0>] (do_group_exit+0x44/0xcc) [ 2.590203] [<c022f06c>] (do_group_exit) from [<c023a3a8>] (get_signal_to_deliver+0x174/0x58c) [ 2.598839] [<c023a234>] (get_signal_to_deliver) from [<c0800088>] (do_signal+0xb4/0x3d0) [ 2.607040] [<c07fffd4>] (do_signal) from [<c020c1c4>] (do_work_pending+0x8c/0xcc) [ 2.614632] [<c020c138>] (do_work_pending) from [<c0209940>] (work_pending+0xc/0x20) [ 2.622398] CPU1: stopping [ 2.625117] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-08898-gf79922c #1 [ 2.632356] Backtrace: [ 2.634826] [<c020c6e0>] (dump_backtrace) from [<c020c878>] (show_stack+0x18/0x1c) [ 2.642419] [<c020c860>] (show_stack) from [<c0802ae4>] (dump_stack+0x80/0x9c) [ 2.649665] [<c0802a64>] (dump_stack) from [<c020f474>] (handle_IPI+0x140/0x17c) [ 2.657083] [<c020f334>] (handle_IPI) from [<c02086dc>] (armada_370_xp_handle_irq+0xbc/0xd4) [ 2.665545] [<c0208620>] (armada_370_xp_handle_irq) from [<c020d3b4>] (__irq_svc+0x34/0x44) [ 2.673917] Exception stack(0xeac77f7c to 0xeac77fc4) [ 2.678981] 7f60: ffffffed [ 2.687181] 7f80: 00000000 ffffffed c0219ce4 eac76000 c0b00884 c0b00818 00000000 00000000 [ 2.695382] 7fa0: 00000000 eac76000 eac77fdc eac77fc4 eac77fc4 c020a554 c0262720 600e0213 [ 2.703579] 7fc0: ffffffff [ 2.706301] [<c0262534>] (cpu_startup_entry) from [<c020f0c0>] (secondary_start_kernel+0x124/0x144) [ 2.715371] [<c020ef9c>] (secondary_start_kernel) from [<002089c8>] (0x2089c8) [ 2.722616] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 2.722616] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 24.23 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- [ 1.394496] orion_wdt: Initial timeout 229 sec [ 1.399775] sdhci: Secure Digital Host Controller Interface driver [ 1.405989] sdhci: Copyright(c) Pierre Ossman [ 1.437825] Synopsys Designware Multimedia Card Interface Driver [ 1.444261] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.450601] usbcore: registered new interface driver usbhid [ 1.456205] usbhid: USB HID core driver [ 1.462709] TCP: cubic registered [ 1.466092] NET: Registered protocol family 17 [ 1.470576] can: controller area network core (rev 20120528 abi 9) [ 1.476993] NET: Registered protocol family 29 [ 1.481470] can: raw protocol (rev 20120528) [ 1.485766] can: broadcast manager protocol (rev 20120528 t) [ 1.491478] can: netlink gateway (rev 20130117) max_hops=1 [ 1.497321] Key type dns_resolver registered [ 1.501702] ThumbEE CPU extension supported. [ 1.506009] Registering SWP/SWPB emulation handler [ 1.511811] rtc-mv d0010300.rtc: setting system clock to 2014-06-12 23:54:28 UTC (1402617268) [ 1.521072] ALSA device list: [ 1.524081] No soundcards found. [ 1.528237] Freeing unused kernel memory: 568K (c0a69000 - c0af7000) [ 1.535400] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.535400] [ 1.544561] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-08898-gf79922c #1 [ 1.551361] Backtrace: [ 1.553839] [<c020c6e0>] (dump_backtrace) from [<c020c878>] (show_stack+0x18/0x1c) [ 1.561429] [<c020c860>] (show_stack) from [<c0802ae4>] (dump_stack+0x80/0x9c) [ 1.568667] [<c0802a64>] (dump_stack) from [<c0800540>] (panic+0x98/0x224) [ 1.575564] [<c08004ac>] (panic) from [<c022eee0>] (do_exit+0x824/0x8c4) [ 1.582281] [<c022e6bc>] (do_exit) from [<c022f0b0>] (do_group_exit+0x44/0xcc) [ 1.589529] [<c022f06c>] (do_group_exit) from [<c023a3a8>] (get_signal_to_deliver+0x174/0x58c) [ 1.598159] [<c023a234>] (get_signal_to_deliver) from [<c0800088>] (do_signal+0xb4/0x3d0) [ 1.606353] [<c07fffd4>] (do_signal) from [<c020c1c4>] (do_work_pending+0x8c/0xcc) [ 1.613940] [<c020c138>] (do_work_pending) from [<c0209940>] (work_pending+0xc/0x20) [ 1.621701] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 1.621701] ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 19.52 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports