Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

next boot: 35 boots: 35 pass, 0 fail (next-20140616)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140616 Full Report =========== arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS armada-370-mirabox 0 min 20.8 sec: PASS arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.2 sec: PASS da850-evm 0 min 15.2 sec: PASS arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.2 sec: PASS (Warnings: 1) am335x-boneblack 0 min 21.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.8 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 12.7 sec: PASS exynos5410-smdk5410 0 min 29.2 sec: PASS (Warnings: 3) am335x-bone 0 min 23.6 sec: PASS tegra124-jetson-tk1 0 min 20.0 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 56.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 11.5 sec: PASS tegra30-beaver 0 min 19.5 sec: PASS omap3-n900 0 min 15.5 sec: PASS qcom-apq8074-dragonboard 0 min 19.2 sec: PASS bcm28155-ap 0 min 26.4 sec: PASS omap3-overo-tobi 0 min 22.3 sec: PASS omap3-overo-storm-tobi 0 min 20.9 sec: PASS omap3-beagle-xm 0 min 45.0 sec: PASS exynos5420-arndale-octa 0 min 42.4 sec: PASS (Warnings: 7) armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS omap5-uevm 1 min 41.0 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.4 sec: PASS (Warnings: 1) exynos5250-arndale 1 min 8.2 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 41.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.3 sec: PASS (Warnings: 1)

11 years, 5 months

mainline boot: 64 boots: 61 pass, 3 fail (v3.16-rc1)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.16-rc1 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ste-snowball: FAIL: arm-u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.3 sec: PASS da850-evm 0 min 15.1 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS tegra30-beaver 0 min 25.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 40.8 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.2 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.0 sec: FAIL armada-370-mirabox 0 min 20.9 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.1 sec: PASS am335x-boneblack 0 min 22.8 sec: PASS omap3-beagle-xm 0 min 55.6 sec: PASS legacy,3530beagle 0 min 42.2 sec: PASS (Warnings: 1) omap4-panda 0 min 57.4 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.0 sec: PASS am335x-bone 0 min 29.4 sec: PASS omap3-overo-storm-tobi 0 min 25.2 sec: PASS omap5-uevm 0 min 56.3 sec: PASS (Warnings: 1) omap3-n900 0 min 17.2 sec: PASS legacy,n900 0 min 17.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.5 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.2 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 13.2 sec: PASS sun4i-a10-cubieboard 0 min 15.7 sec: PASS exynos5410-smdk5410 0 min 28.8 sec: PASS am335x-bone 0 min 28.5 sec: PASS tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 55.5 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.7 sec: PASS imx6dl-wandboard,wand-dual 0 min 14.8 sec: PASS ste-snowball 1 min 14.5 sec: PASS tegra30-beaver 0 min 17.3 sec: PASS omap3-n900 0 min 16.8 sec: PASS qcom-apq8074-dragonboard 0 min 17.8 sec: PASS bcm28155-ap 0 min 24.9 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS omap3-overo-storm-tobi 0 min 24.3 sec: PASS omap3-beagle-xm 0 min 49.9 sec: PASS exynos5420-arndale-octa 0 min 41.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 43.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 57.0 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 30.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.5 sec: PASS sun4i-a10-cubieboard 0 min 11.8 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.1 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.5 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 40.2 sec: PASS exynos5250-arndale 0 min 30.4 sec: PASS exynos5410-smdk5410 0 min 27.5 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.2 sec: PASS imx6q-wandboard 0 min 14.3 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.8 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 31.1 sec: FAIL armada-370-mirabox 0 min 23.1 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.8 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.7 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 45048012 02109078 [<c0186a38>] (_set_bit) from [<c01c9d5c>] (n_tty_set_termios+0x234/0x348) [<c01c9d5c>] (n_tty_set_termios) from [<c01c9f5c>] (n_tty_open+0xec/0x114) [<c01c9f5c>] (n_tty_open) from [<c01cd9b8>] (tty_ldisc_open+0x3c/0x78) [<c01cd9b8>] (tty_ldisc_open) from [<c01ce134>] (tty_ldisc_setup+0x18/0x5c) [<c01ce134>] (tty_ldisc_setup) from [<c01c6da8>] (tty_init_dev+0x94/0x184) [<c01c6da8>] (tty_init_dev) from [<c01c76b4>] (tty_open+0x2d0/0x5a8) [<c01c76b4>] (tty_open) from [<c00af400>] (chrdev_open+0xc4/0x184) [<c00af400>] (chrdev_open) from [<c00a9b24>] (do_dentry_open.isra.12+0x1b0/0x2f0) [<c00a9b24>] (do_dentry_open.isra.12) from [<c00a9d34>] (finish_open+0x20/0x38) [<c00a9d34>] (finish_open) from [<c00b7e08>] (do_last.isra.41+0x5a4/0xb50) [<c00b7e08>] (do_last.isra.41) from [<c00b8468>] (path_openat+0xb4/0x5c8) [<c00b8468>] (path_openat) from [<c00b8c80>] (do_filp_open+0x2c/0x80) [<c00b8c80>] (do_filp_open) from [<c00aac8c>] (do_sys_open+0x110/0x1cc) [<c00aac8c>] (do_sys_open) from [<c0581cb0>] (kernel_init_freeable+0x128/0x1c8) [<c0581cb0>] (kernel_init_freeable) from [<c0422f78>] (kernel_init+0x8/0xec) [<c0422f78>] (kernel_init) from [<c000e638>] (ret_from_fork+0x14/0x3c) Code: 00f091f5 1233a0e1 9f2f91e1 032082e1 (920f81e1) ---[ end trace 0b136eb408c90504 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.16.0-rc1 #1 [<c0014b04>] (unwind_backtrace) from [<c0010eb0>] (show_stack+0x10/0x14) [<c0010eb0>] (show_stack) from [<c0425f40>] (dump_stack+0x74/0x90) [<c0425f40>] (dump_stack) from [<c00139dc>] (handle_IPI+0x134/0x170) [<c00139dc>] (handle_IPI) from [<c0008650>] (armada_370_xp_handle_irq+0xb0/0xcc) [<c0008650>] (armada_370_xp_handle_irq) from [<c0011980>] (__irq_svc+0x40/0x50) Exception stack(0xed87dfa8 to 0xed87dff0) dfa0: edfd53d8 00000000 00717754 00000000 ed87c000 c05c049c dfc0: c042cd78 c05f4fd5 c05f4fd5 562f5842 00000001 00000000 00000000 ed87dff0 dfe0: c000f168 c004eba8 60000313 ffffffff [<c0011980>] (__irq_svc) from [<c004eba8>] (cpu_startup_entry+0xe8/0x140) [<c004eba8>] (cpu_startup_entry) from [<00008768>] (0x8768) ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 24.01 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.503417] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511260] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519195] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531097] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538421] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.549896] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558441] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570373] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577697] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589172] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.596984] HS USB OTG: no transceiver configured [ 3.601684] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609527] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617462] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629364] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.636688] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648162] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.656707] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668640] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.675964] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687438] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695251] HS USB OTG: no transceiver configured [ 3.699951] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.707794] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.715728] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.727661] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.734985] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746459] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.754974] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.766906] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774230] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785705] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793518] HS USB OTG: no transceiver configured [ 3.798217] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806091] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.813995] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.76 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ [ 6.595563] 655 slab pages [ 6.598275] 18 pages shared [ 6.601081] 0 pages swap cached [ 6.604229] [ pid ] uid tgid total_vm rss nr_ptes swapents oom_score_adj name [ 6.612113] Kernel panic - not syncing: Out of memory and no killable processes... [ 6.612113] [ 6.621185] CPU: 1 PID: 112 Comm: kworker/u4:2 Not tainted 3.16.0-rc1 #1 [ 6.627923] [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [ 6.635696] [<c021160c>] (show_stack) from [<c07ffa74>] (dump_stack+0x78/0x94) [ 6.642942] [<c07ffa74>] (dump_stack) from [<c07fd5dc>] (panic+0x90/0x21c) [ 6.649842] [<c07fd5dc>] (panic) from [<c02b5a7c>] (out_of_memory+0x320/0x340) [ 6.657089] [<c02b5a7c>] (out_of_memory) from [<c02b9718>] (__alloc_pages_nodemask+0x874/0x930) [ 6.665816] [<c02b9718>] (__alloc_pages_nodemask) from [<c02d4c1c>] (handle_mm_fault+0x730/0x958) [ 6.674714] [<c02d4c1c>] (handle_mm_fault) from [<c02cfa50>] (__get_user_pages+0xd0/0x4c0) [ 6.683003] [<c02cfa50>] (__get_user_pages) from [<c02f38f4>] (get_arg_page+0x54/0xbc) [ 6.690942] [<c02f38f4>] (get_arg_page) from [<c02f3bd4>] (copy_strings+0x278/0x29c) [ 6.698707] [<c02f3bd4>] (copy_strings) from [<c02f3c18>] (copy_strings_kernel+0x20/0x28) [ 6.706908] [<c02f3c18>] (copy_strings_kernel) from [<c02f5280>] (do_execve+0x3a8/0x4c8) [ 6.715023] [<c02f5280>] (do_execve) from [<c025af14>] (____call_usermodehelper+0x15c/0x194) [ 6.723487] [<c025af14>] (____call_usermodehelper) from [<c020e9b8>] (ret_from_fork+0x14/0x3c) [ 6.732129] CPU0: stopping [ 6.734851] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-rc1 #1 [ 6.741144] [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [ 6.748913] [<c021160c>] (show_stack) from [<c07ffa74>] (dump_stack+0x78/0x94) [ 6.756156] [<c07ffa74>] (dump_stack) from [<c021429c>] (handle_IPI+0x138/0x174) [ 6.763573] [<c021429c>] (handle_IPI) from [<c02087f0>] (armada_370_xp_handle_irq+0xb0/0xcc) [ 6.772036] [<c02087f0>] (armada_370_xp_handle_irq) from [<c0212100>] (__irq_svc+0x40/0x50) [ 6.780407] Exception stack(0xc0b67f68 to 0xc0b67fb0) [ 6.785473] 7f60: e9fad598 00000000 00e85a5b 00000000 c0b6e4c4 c0b6e458 [ 6.793672] 7f80: 00000000 00000000 c0b63da8 0000004c 00000000 c0b66000 00000000 c0b67fb0 [ 6.801869] 7fa0: c027bed8 c027be68 60000313 ffffffff [ 6.806940] [<c0212100>] (__irq_svc) from [<c027be68>] (cpu_startup_entry+0x48/0x208) [ 6.814794] [<c027be68>] (cpu_startup_entry) from [<c0ac1b2c>] (start_kernel+0x318/0x37c) [ 6.822995] [<c0ac1b2c>] (start_kernel) from [<00208078>] (0x208078) [ 6.829368] ---[ end Kernel panic - not syncing: Out of memory and no killable processes... [ 6.829368] ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 31.06 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

mainline boot: 31 boots: 31 pass, 0 fail (v3.16-rc1)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.16-rc1 Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.3 sec: PASS da850-evm 0 min 15.1 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.1 sec: PASS arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.2 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 13.2 sec: PASS sun4i-a10-cubieboard 0 min 15.7 sec: PASS exynos5410-smdk5410 0 min 28.8 sec: PASS am335x-bone 0 min 28.5 sec: PASS tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 55.5 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.7 sec: PASS imx6dl-wandboard,wand-dual 0 min 14.8 sec: PASS ste-snowball 1 min 14.5 sec: PASS tegra30-beaver 0 min 17.3 sec: PASS omap3-n900 0 min 16.8 sec: PASS qcom-apq8074-dragonboard 0 min 17.8 sec: PASS bcm28155-ap 0 min 24.9 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS omap3-overo-storm-tobi 0 min 24.3 sec: PASS omap3-beagle-xm 0 min 49.9 sec: PASS exynos5420-arndale-octa 0 min 41.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 43.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 57.0 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 30.9 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 40.8 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.2 sec: PASS

11 years, 5 months

mainline boot: 25 passed 16 failed (mainline/v3.16-rc1)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:27.92 capri bcm_defconfig : FAILED 1:23.62 capri multi_v7_defconfig : FAILED 1:30.37 cubox multi_v7_defconfig : FAILED 1:38.83 dalmore multi_v7_defconfig : FAILED 1:31.36 dalmore multi_lpae_defconfig : FAILED 1:36.87 hummingboard multi_v7_defconfig : FAILED 1:32.29 jetson multi_v7_defconfig : FAILED 1:28.68 jetson multi_lpae_defconfig : FAILED 1:26.09 omap5uevm omap2plus_defconfig : FAILED 1:43.89 omap5uevm multi_v7_defconfig : FAILED 1:44.16 omap5uevm multi_lpae_defconfig : FAILED 1:42.80 seaboard multi_v7_defconfig : FAILED 0:35.83 snow multi_v7_defconfig : FAILED 1:19.10 snowball u8500_defconfig : FAILED 2:14.56 wandboard multi_v7_defconfig : FAILED 1:32.52 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.13 arndale exynos_defconfig : passed 1:13.86 arndale multi_v7_defconfig : passed 1:42.42 arndale multi_lpae_defconfig : passed 1:26.41 bbb omap2plus_defconfig : passed 1:32.44 bbb multi_v7_defconfig : passed 1:19.71 beaver tegra_defconfig : passed 0:59.47 cubie sunxi_defconfig : passed 1:34.86 cubie multi_v7_defconfig : passed 1:35.16 cubie2 sunxi_defconfig : passed 1:35.35 cubie2 multi_v7_defconfig : passed 1:30.00 cubie2 multi_lpae_defconfig : passed 1:18.05 dalmore tegra_defconfig : passed 1:46.25 hummingboard imx_v6_v7_defconfig : passed 1:11.33 jetson tegra_defconfig : passed 1:03.57 panda omap2plus_defconfig : warnings 1:26.22 panda multi_v7_defconfig : warnings 1:55.89 sama5 sama5_defconfig : warnings 1:52.87 seaboard tegra_defconfig : passed 1:06.49 snow exynos_defconfig : passed 1:29.62 snow multi_lpae_defconfig : passed 1:22.88 snowball multi_v7_defconfig : passed 2:44.93 trimslice tegra_defconfig : passed 1:17.46 trimslice multi_v7_defconfig : passed 1:07.89 wandboard imx_v6_v7_defconfig : passed 1:14.34 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.572086] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.578173] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.583131] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.589218] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.596962] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.604064] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.609658] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.616031] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.626028] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.636148] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.642792] [drm] No driver support for vblank timestamp query. [ 3.648744] host1x drm: No connectors reported connected with modes [ 3.655009] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.678304] Console: switching to colour frame buffer device 128x48 [ 3.690019] host1x drm: fb0: frame buffer device [ 3.694715] host1x drm: registered panic notifier [ 3.713644] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.719910] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.727355] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.738844] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.744251] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.752053] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.763250] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.769598] hub 1-0:1.0: USB hub found [ 3.773375] hub 1-0:1.0: 1 port detected [ 3.777765] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.783183] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.790918] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.803633] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.809920] hub 2-0:1.0: USB hub found [ 3.813697] hub 2-0:1.0: 1 port detected [ 3.821521] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.834298] usb1_vbus: disabling [ 3.837700] ALSA device list: [ 3.840680] #0: NVIDIA Tegra Beaver [ 3.844909] Waiting for root device /dev/mmcblk0p1... [ 4.123659] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.592426] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1800 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.225998] hub 2-0:1.0: 1 port detected [ 1.230373] SPEAr-ehci: EHCI SPEAr driver [ 1.234485] tegra-ehci: Tegra EHCI driver [ 1.238620] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244803] ohci-pci: OHCI PCI platform driver [ 1.249311] ohci-platform: OHCI generic platform driver [ 1.254632] ohci-omap3: OHCI OMAP3 driver [ 1.258731] SPEAr-ohci: OHCI SPEAr driver [ 1.263472] usbcore: registered new interface driver usb-storage [ 1.271025] mousedev: PS/2 mouse device common for all mice [ 1.278045] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287371] i2c /dev entries driver [ 1.293078] usbcore: registered new interface driver uvcvideo [ 1.298835] USB Video Class driver (1.1.1) [ 1.302926] gspca_main: v2.14.0 registered [ 1.310220] orion_wdt: Initial timeout 25 sec [ 1.315676] sdhci: Secure Digital Host Controller Interface driver [ 1.321844] sdhci: Copyright(c) Pierre Ossman [ 1.326764] Synopsys Designware Multimedia Card Interface Driver [ 1.333449] usbcore: registered new interface driver usbhid [ 1.339011] usbhid: USB HID core driver [ 1.347575] TCP: cubic registered [ 1.350919] NET: Registered protocol family 17 [ 1.355376] can: controller area network core (rev 20120528 abi 9) [ 1.361620] NET: Registered protocol family 29 [ 1.366060] can: raw protocol (rev 20120528) [ 1.370324] can: broadcast manager protocol (rev 20120528 t) [ 1.375979] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381855] Key type dns_resolver registered [ 1.386328] ThumbEE CPU extension supported. [ 1.390611] Registering SWP/SWPB emulation handler [ 1.395401] PJ4 iWMMXt v2 coprocessor enabled. [ 1.400124] ata1: SATA link down (SStatus 0 SControl F300) [ 1.406586] USB Power: 5000 mV [ 1.410150] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-16 04:59:49 UTC (1402894789) [ 1.420667] ALSA device list: [ 1.423624] No soundcards found. [ 1.427571] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.969501] i2c 0-004c: Driver lm90 requests probe deferral [ 2.976927] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.982529] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.992435] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.998902] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.009411] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.015054] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.025254] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.036899] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.046276] hub 1-0:1.0: USB hub found [ 3.050291] hub 1-0:1.0: 1 port detected [ 3.056339] i2c 0-004c: Driver lm90 requests probe deferral [ 3.063639] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.069192] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.079139] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.085558] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.097273] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.105456] i2c 0-004c: Driver lm90 requests probe deferral [ 3.113158] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.113274] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.113372] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.116520] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.116768] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.186544] VDD_5V0_HDMI_CON: disabling [ 3.190438] vdd_cam_1v8_reg: disabling [ 3.194660] vdd_hdmi_5v0: disabling [ 3.198367] usb1_vbus: disabling [ 3.201686] dvdd_ts: disabling [ 3.206922] ALSA device list: [ 3.209947] #0: NVIDIA Tegra Dalmore [ 3.216287] Waiting for root device /dev/mmcblk0p1... [ 3.401975] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.885346] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.896860] i2c 0-004c: Driver lm90 requests probe deferral [ 3.904391] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.910023] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.919815] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.926208] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.958040] i2c 0-004c: Driver lm90 requests probe deferral [ 2.965561] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.971190] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.981216] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.987734] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.998605] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.004253] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.013970] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.027173] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.036967] hub 1-0:1.0: USB hub found [ 3.040951] hub 1-0:1.0: 1 port detected [ 3.047069] i2c 0-004c: Driver lm90 requests probe deferral [ 3.054449] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.060066] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.069909] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.076389] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.087997] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.096155] i2c 0-004c: Driver lm90 requests probe deferral [ 3.103776] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.103994] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.104076] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.107272] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.107531] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.177328] VDD_5V0_HDMI_CON: disabling [ 3.181208] vdd_cam_1v8_reg: disabling [ 3.185442] vdd_hdmi_5v0: disabling [ 3.189153] usb1_vbus: disabling [ 3.192474] dvdd_ts: disabling [ 3.197727] ALSA device list: [ 3.200737] #0: NVIDIA Tegra Dalmore [ 3.207249] Waiting for root device /dev/mmcblk0p1... [ 3.392298] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.875693] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.887291] i2c 0-004c: Driver lm90 requests probe deferral [ 3.894791] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.900427] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.910220] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.916616] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031383] usbcore: registered new interface driver usb-storage [ 1.042557] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047771] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052713] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065092] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071292] hub 1-0:1.0: USB hub found [ 1.075124] hub 1-0:1.0: 1 port detected [ 1.082803] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.087907] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.092832] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105106] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111246] hub 2-0:1.0: USB hub found [ 1.115046] hub 2-0:1.0: 1 port detected [ 1.119816] mousedev: PS/2 mouse device common for all mice [ 1.128099] i2c /dev entries driver [ 1.132816] usbcore: registered new interface driver uvcvideo [ 1.138596] USB Video Class driver (1.1.1) [ 1.142720] gspca_main: v2.14.0 registered [ 1.149503] sdhci: Secure Digital Host Controller Interface driver [ 1.155716] sdhci: Copyright(c) Pierre Ossman [ 1.160915] Synopsys Designware Multimedia Card Interface Driver [ 1.167865] usbcore: registered new interface driver usbhid [ 1.173467] usbhid: USB HID core driver [ 1.182200] TCP: cubic registered [ 1.185565] NET: Registered protocol family 17 [ 1.190037] can: controller area network core (rev 20120528 abi 9) [ 1.196298] NET: Registered protocol family 29 [ 1.200774] can: raw protocol (rev 20120528) [ 1.205057] can: broadcast manager protocol (rev 20120528 t) [ 1.210758] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216643] Key type dns_resolver registered [ 1.221095] ThumbEE CPU extension supported. [ 1.225415] Registering SWP/SWPB emulation handler [ 1.231394] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246443] ALSA device list: [ 1.249427] No soundcards found. [ 1.253532] Waiting for root device /dev/mmcblk0p2... [ 60.325219] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.058063] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.066284] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.075867] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.082066] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.090227] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.095685] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.103434] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.116905] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.123706] hub 2-0:1.0: USB hub found [ 2.127511] hub 2-0:1.0: 1 port detected [ 2.132209] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.136706] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.144264] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.152492] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.162151] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.168349] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.176533] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.183835] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.184028] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.197007] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.204534] +5V_HDMI_CON: disabling [ 2.204539] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.204569] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.224876] +USB0_VBUS_SW: disabling [ 2.228491] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.233266] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.233458] ALSA device list: [ 2.233464] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.251178] Waiting for root device /dev/mmcblk0p1... [ 2.441932] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.904776] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.915881] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.920468] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.927996] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.936192] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.945717] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.951871] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.058292] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.066516] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.076099] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.082296] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.090470] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.095928] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.103660] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.117078] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.123887] hub 2-0:1.0: USB hub found [ 2.127693] hub 2-0:1.0: 1 port detected [ 2.132403] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.136933] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.144500] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.152733] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.162379] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.168576] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.176875] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.184110] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.188716] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.188766] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:21 UTC (949363221) [ 2.204881] +5V_HDMI_CON: disabling [ 2.204887] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.204915] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.225239] +USB0_VBUS_SW: disabling [ 2.228856] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.233630] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.233822] ALSA device list: [ 2.233827] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.251530] Waiting for root device /dev/mmcblk0p1... [ 2.442106] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.904640] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.915836] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.920434] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.927964] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.936160] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.945682] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.951838] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.078112] TCP: cubic registered [ 47.078119] NET: Registered protocol family 17 [ 47.078135] can: controller area network core (rev 20120528 abi 9) [ 47.078184] NET: Registered protocol family 29 [ 47.078191] can: raw protocol (rev 20120528) [ 47.078197] can: broadcast manager protocol (rev 20120528 t) [ 47.078206] can: netlink gateway (rev 20130117) max_hops=1 [ 47.078509] Key type dns_resolver registered [ 47.078584] omap_vc_init_channel: No PMIC info for vdd_core [ 47.078587] omap_vp_init: No PMIC info for vdd_core [ 47.078590] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.078592] omap_vp_init: No PMIC info for vdd_mm [ 47.078596] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.078598] omap_vp_init: No PMIC info for vdd_mpu [ 47.078901] ThumbEE CPU extension supported. [ 47.078918] Registering SWP/SWPB emulation handler [ 47.087518] palmas 0-0048: Irq flag is 0x00000000 [ 47.169873] mmcblk0: unknown partition table [ 47.175221] mmcblk0boot1: unknown partition table [ 47.180993] mmcblk0boot0: unknown partition table [ 47.186020] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.193574] smps123: 600 <--> 1500 mV at 1060 mV [ 47.199720] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206170] smps6: 1200 mV [ 47.210162] smps7: 1800 mV [ 47.214299] smps8: 600 <--> 1310 mV at 1040 mV [ 47.220039] smps9: failed to get the current voltage [ 47.225285] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.237334] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.361808] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.369747] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.375839] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.383289] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.390153] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.397861] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.411341] ALSA device list: [ 47.414452] No soundcards found. [ 47.418450] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.511853] can: raw protocol (rev 20120528) [ 47.511859] can: broadcast manager protocol (rev 20120528 t) [ 47.511870] can: netlink gateway (rev 20130117) max_hops=1 [ 47.512170] Key type dns_resolver registered [ 47.512256] omap_vc_init_channel: No PMIC info for vdd_core [ 47.512258] omap_vp_init: No PMIC info for vdd_core [ 47.512262] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.512264] omap_vp_init: No PMIC info for vdd_mm [ 47.512267] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.512269] omap_vp_init: No PMIC info for vdd_mpu [ 47.512583] ThumbEE CPU extension supported. [ 47.512600] Registering SWP/SWPB emulation handler [ 47.517499] palmas 0-0048: Irq flag is 0x00000000 [ 47.589124] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.595869] mmc0: new high speed MMC card at address 0001 [ 47.601765] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.606570] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.612837] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.619708] mmcblk0: unknown partition table [ 47.624310] smps123: 600 <--> 1500 mV at 1060 mV [ 47.625061] mmcblk0boot1: unknown partition table [ 47.625813] mmcblk0boot0: unknown partition table [ 47.640459] smps45: 600 <--> 1310 mV at 1030 mV [ 47.646900] smps6: 1200 mV [ 47.650867] smps7: 1800 mV [ 47.654972] smps8: 600 <--> 1310 mV at 1040 mV [ 47.660706] smps9: failed to get the current voltage [ 47.665953] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.678016] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.806778] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.951788] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.957875] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.965324] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.972174] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.979898] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.993310] ALSA device list: [ 47.996405] No soundcards found. [ 48.000414] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.951477] Key type dns_resolver registered [ 1.951594] omap_vc_init_channel: No PMIC info for vdd_core [ 1.951598] omap_vp_init: No PMIC info for vdd_core [ 1.951608] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.951611] omap_vp_init: No PMIC info for vdd_mm [ 1.951620] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.951623] omap_vp_init: No PMIC info for vdd_mpu [ 1.952183] ThumbEE CPU extension supported. [ 1.952208] Registering SWP/SWPB emulation handler [ 1.952220] SmartReflex Class3 initialized [ 2.016251] palmas 0-0048: Irq flag is 0x00000000 [ 2.034024] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.034372] mmc0: new high speed MMC card at address 0001 [ 2.040018] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.040252] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.040455] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.043263] mmcblk0: unknown partition table [ 2.045266] mmcblk0boot1: unknown partition table [ 2.047141] mmcblk0boot0: unknown partition table [ 2.123679] smps123: 600 <--> 1500 mV at 1060 mV [ 2.130800] smps45: 600 <--> 1310 mV at 1030 mV [ 2.138142] smps6: 1200 mV [ 2.142902] smps7: 1800 mV [ 2.147856] smps8: 600 <--> 1310 mV at 1040 mV [ 2.154363] smps9: failed to get the current voltage [ 2.160321] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.174710] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.183548] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191437] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.197559] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.206700] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.216106] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.223096] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.231701] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.240389] sr_init: No PMIC hook to init smartreflex [ 2.245854] sr_init: platform driver register failed for SR [ 2.274153] pbias_mmc_omap5: disabling [ 2.279648] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.120642] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.127259] hub 3-0:1.0: USB hub found [ 2.131057] hub 3-0:1.0: 1 port detected [ 2.136088] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.143103] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-16 05:00:35 UTC (1402894835) [ 2.155687] vdd_1v2: disabling [ 2.158906] vdd_1v5: disabling [ 2.222029] ALSA device list: [ 2.224990] #0: NVIDIA Tegra Seaboard [ 2.229474] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.237232] Please append a correct "root=" boot option; here are the available partitions: [ 2.245586] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.253837] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1 #1 [ 2.260118] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.267858] [<c0211c68>] (show_stack) from [<c0811bf4>] (dump_stack+0x88/0x98) [ 2.275070] [<c0811bf4>] (dump_stack) from [<c080ea44>] (panic+0xa0/0x218) [ 2.281941] [<c080ea44>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.289414] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.297319] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.305310] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.314167] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cd3c>] (kernel_init+0x8/0xf0) [ 2.322246] [<c080cd3c>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.329802] CPU1: stopping [ 2.332506] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1 #1 [ 2.338773] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.346508] [<c0211c68>] (show_stack) from [<c0811bf4>] (dump_stack+0x88/0x98) [ 2.353720] [<c0811bf4>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.361103] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.368659] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.376124] Exception stack(0xea087f68 to 0xea087fb0) [ 2.381165] 7f60: 00000000 c0bc1fb4 c0bc1fb4 0000004c 8a94d268 00000000 [ 2.389327] 7f80: 8ad4b9c8 00000000 eafb6db0 ea086000 00000000 c081f048 00000015 ea087fb0 [ 2.397486] 7fa0: c06b2fe4 c06b2ff0 60000113 ffffffff [ 2.402533] [<c02127c0>] (__irq_svc) from [<c06b2ff0>] (cpuidle_enter_state+0x68/0x100) [ 2.410532] [<c06b2ff0>] (cpuidle_enter_state) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.419303] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.426075] drm_kms_helper: panic occurred, switching back to text console [ 2.432960] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2920.596429] usbcore: registered new interface driver hub [ 2920.596481] usbcore: registered new device driver usb [ 2920.596895] Linux video capture interface: v2.00 [ 2920.596916] pps_core: LinuxPPS API ver. 1 registered [ 2920.596920] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596935] PTP clock support registered [ 2920.596970] EDAC MC: Ver: 3.0.0 [ 2920.597318] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597776] Switched to clocksource arch_sys_counter [ 2920.602051] NET: Registered protocol family 2 [ 2920.602297] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602335] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602408] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602437] TCP: reno registered [ 2920.602443] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602460] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602540] NET: Registered protocol family 1 [ 2920.602678] RPC: Registered named UNIX socket transport module. [ 2920.602682] RPC: Registered udp transport module. [ 2920.602686] RPC: Registered tcp transport module. [ 2920.602690] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2920.602702] PCI: CLS 0 bytes, default 64 [ 2920.603047] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 2920.603709] futex hash table entries: 512 (order: 3, 32768 bytes) [ 2920.609011] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2920.609353] NFS: Registering the id_resolver key type [ 2920.609374] Key type id_resolver registered [ 2920.609378] Key type id_legacy registered [ 2920.609403] msgmni has been set to 1464 [ 2920.609626] bounce: pool size: 64 pages [ 2920.609725] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2920.609733] io scheduler noop registered [ 2920.609739] io scheduler deadline registered [ 2920.609822] io scheduler cfq registered (default) [ 2920.612500] backlight supply power not found, using dummy regulator [ 2920.612552] pwm-backlight backlight: unable to request PWM, trying legacy API [ 2920.612558] pwm-backlight backlight: unable to request legacy PWM [ 2920.612595] platform backlight: Driver pwm-backlight requests probe deferral [ 2920.612788] simple-framebuf~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627166] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635101] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647003] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654327] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665802] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674316] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686248] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693572] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705047] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712860] HS USB OTG: no transceiver configured [ 3.717559] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725433] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733337] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745269] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752593] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764068] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772583] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784515] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791809] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803314] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811126] HS USB OTG: no transceiver configured [ 3.815826] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823669] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831573] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843505] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850830] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862304] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870819] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882751] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890045] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901550] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909332] HS USB OTG: no transceiver configured [ 3.914062] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.921905] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.929809] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941741] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949035] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960540] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.065165] ohci-platform: OHCI generic platform driver [ 1.070559] ohci-omap3: OHCI OMAP3 driver [ 1.074726] SPEAr-ohci: OHCI SPEAr driver [ 1.079560] usbcore: registered new interface driver usb-storage [ 1.090590] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.095670] ci_hdrc ci_hdrc.0: no supported roles [ 1.100502] 2184200.usb supply vbus not found, using dummy regulator [ 1.110597] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.115681] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.120600] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.137808] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.143991] hub 1-0:1.0: USB hub found [ 1.147814] hub 1-0:1.0: 1 port detected [ 1.152521] mousedev: PS/2 mouse device common for all mice [ 1.160649] i2c /dev entries driver [ 1.165330] usbcore: registered new interface driver uvcvideo [ 1.171109] USB Video Class driver (1.1.1) [ 1.175232] gspca_main: v2.14.0 registered [ 1.181930] sdhci: Secure Digital Host Controller Interface driver [ 1.188136] sdhci: Copyright(c) Pierre Ossman [ 1.193364] Synopsys Designware Multimedia Card Interface Driver [ 1.200283] usbcore: registered new interface driver usbhid [ 1.205876] usbhid: USB HID core driver [ 1.214258] TCP: cubic registered [ 1.217596] NET: Registered protocol family 17 [ 1.222088] can: controller area network core (rev 20120528 abi 9) [ 1.228344] NET: Registered protocol family 29 [ 1.232820] can: raw protocol (rev 20120528) [ 1.237104] can: broadcast manager protocol (rev 20120528 t) [ 1.242795] can: netlink gateway (rev 20130117) max_hops=1 [ 1.248703] Key type dns_resolver registered [ 1.253458] ThumbEE CPU extension supported. [ 1.257780] Registering SWP/SWPB emulation handler [ 1.264202] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.279263] ALSA device list: [ 1.282247] No soundcards found. [ 1.286243] Waiting for root device /dev/mmcblk0p2... [ 60.323325] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 269 warnings 0 failures (mainline/v3.16-rc1)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 7171511 Linux 3.16-rc1 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.16-rc1/ Runtime: 46m 0s Passed: 126 Failed: 0 Warnings: 269 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2575:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2547:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2549:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

next boot: 29 passed 12 failed (next/next-20140616)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:26.83 capri bcm_defconfig : FAILED 1:25.20 capri multi_v7_defconfig : FAILED 1:26.50 cubox multi_v7_defconfig : FAILED 1:35.66 dalmore multi_v7_defconfig : FAILED 1:34.12 dalmore multi_lpae_defconfig : FAILED 1:30.68 hummingboard multi_v7_defconfig : FAILED 1:28.60 jetson multi_v7_defconfig : FAILED 1:28.64 jetson multi_lpae_defconfig : FAILED 1:28.66 seaboard multi_v7_defconfig : FAILED 0:35.35 snowball u8500_defconfig : FAILED 1:44.35 wandboard multi_v7_defconfig : FAILED 1:36.70 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.15 arndale exynos_defconfig : passed 1:19.36 arndale multi_v7_defconfig : passed 1:27.82 arndale multi_lpae_defconfig : passed 1:23.54 bbb omap2plus_defconfig : passed 1:29.67 bbb multi_v7_defconfig : passed 1:26.40 beaver tegra_defconfig : passed 0:52.80 cubie sunxi_defconfig : passed 1:16.15 cubie multi_v7_defconfig : passed 1:40.24 cubie2 sunxi_defconfig : warnings 1:06.31 cubie2 multi_v7_defconfig : warnings 1:27.75 cubie2 multi_lpae_defconfig : warnings 1:24.56 dalmore tegra_defconfig : passed 1:21.70 hummingboard imx_v6_v7_defconfig : warnings 1:12.08 jetson tegra_defconfig : passed 0:58.86 omap5uevm omap2plus_defconfig : warnings 1:03.24 omap5uevm multi_v7_defconfig : warnings 2:04.28 omap5uevm multi_lpae_defconfig : warnings 1:59.68 panda omap2plus_defconfig : warnings 1:36.40 panda multi_v7_defconfig : warnings 1:46.63 sama5 sama5_defconfig : warnings 2:00.45 seaboard tegra_defconfig : passed 1:10.02 snow exynos_defconfig : passed 0:58.79 snow multi_v7_defconfig : passed 1:00.46 snow multi_lpae_defconfig : passed 1:00.60 snowball multi_v7_defconfig : passed 3:17.73 trimslice tegra_defconfig : passed 2:15.27 trimslice multi_v7_defconfig : passed 0:54.66 wandboard imx_v6_v7_defconfig : passed 1:11.66 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.590781] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.596875] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.601839] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.607931] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.615682] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.622789] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.628385] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.634771] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.644768] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.655297] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.661925] [drm] No driver support for vblank timestamp query. [ 3.667876] host1x drm: No connectors reported connected with modes [ 3.674142] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.698038] Console: switching to colour frame buffer device 128x48 [ 3.709773] host1x drm: fb0: frame buffer device [ 3.714469] host1x drm: registered panic notifier [ 3.733636] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.739908] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.747367] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.758871] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.764276] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.772069] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.783243] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.789584] hub 1-0:1.0: USB hub found [ 3.793361] hub 1-0:1.0: 1 port detected [ 3.797738] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.803157] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.810913] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.823624] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.829914] hub 2-0:1.0: USB hub found [ 3.833686] hub 2-0:1.0: 1 port detected [ 3.841649] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.854460] usb1_vbus: disabling [ 3.857869] ALSA device list: [ 3.860865] #0: NVIDIA Tegra Beaver [ 3.865106] Waiting for root device /dev/mmcblk0p1... [ 4.143647] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.612394] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 2500 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.226121] hub 2-0:1.0: 1 port detected [ 1.230496] SPEAr-ehci: EHCI SPEAr driver [ 1.234605] tegra-ehci: Tegra EHCI driver [ 1.238734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244915] ohci-pci: OHCI PCI platform driver [ 1.249415] ohci-platform: OHCI generic platform driver [ 1.254729] ohci-omap3: OHCI OMAP3 driver [ 1.258826] SPEAr-ohci: OHCI SPEAr driver [ 1.263554] usbcore: registered new interface driver usb-storage [ 1.271081] mousedev: PS/2 mouse device common for all mice [ 1.278056] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287390] i2c /dev entries driver [ 1.292871] usbcore: registered new interface driver uvcvideo [ 1.298624] USB Video Class driver (1.1.1) [ 1.302726] gspca_main: v2.14.0 registered [ 1.309988] orion_wdt: Initial timeout 25 sec [ 1.315527] sdhci: Secure Digital Host Controller Interface driver [ 1.321690] sdhci: Copyright(c) Pierre Ossman [ 1.326623] Synopsys Designware Multimedia Card Interface Driver [ 1.333324] usbcore: registered new interface driver usbhid [ 1.338884] usbhid: USB HID core driver [ 1.346712] TCP: cubic registered [ 1.350025] NET: Registered protocol family 17 [ 1.354493] can: controller area network core (rev 20120528 abi 9) [ 1.360734] NET: Registered protocol family 29 [ 1.365161] can: raw protocol (rev 20120528) [ 1.369433] can: broadcast manager protocol (rev 20120528 t) [ 1.375086] can: netlink gateway (rev 20130117) max_hops=1 [ 1.380962] Key type dns_resolver registered [ 1.385434] ThumbEE CPU extension supported. [ 1.389699] Registering SWP/SWPB emulation handler [ 1.394488] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399197] ata1: SATA link down (SStatus 0 SControl F300) [ 1.405686] USB Power: 5000 mV [ 1.409193] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-16 04:06:58 UTC (1402891618) [ 1.419713] ALSA device list: [ 1.422689] No soundcards found. [ 1.426613] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.975235] i2c 0-004c: Driver lm90 requests probe deferral [ 2.982639] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.988243] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.998186] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.004650] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.015047] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.020674] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.030624] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.047117] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.056628] hub 1-0:1.0: USB hub found [ 3.060791] hub 1-0:1.0: 1 port detected [ 3.067073] i2c 0-004c: Driver lm90 requests probe deferral [ 3.074510] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.080137] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.090163] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.096670] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.108686] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.117129] i2c 0-004c: Driver lm90 requests probe deferral [ 3.122817] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.159240] VDD_5V0_HDMI_CON: disabling [ 3.163199] vdd_cam_1v8_reg: disabling [ 3.167381] vdd_hdmi_5v0: disabling [ 3.170913] usb1_vbus: disabling [ 3.174269] dvdd_ts: disabling [ 3.181590] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.182339] ALSA device list: [ 3.182355] #0: NVIDIA Tegra Dalmore [ 3.194027] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.196992] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.197233] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.217043] Waiting for root device /dev/mmcblk0p1... [ 3.387257] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.870535] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.882450] i2c 0-004c: Driver lm90 requests probe deferral [ 3.889965] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.895600] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.905435] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.911940] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.960630] i2c 0-004c: Driver lm90 requests probe deferral [ 2.968115] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.973724] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.983724] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.990187] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.000529] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.006176] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.016150] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.032368] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.041729] hub 1-0:1.0: USB hub found [ 3.045741] hub 1-0:1.0: 1 port detected [ 3.051775] i2c 0-004c: Driver lm90 requests probe deferral [ 3.059059] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.064606] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.074557] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.080990] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.092671] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.100867] i2c 0-004c: Driver lm90 requests probe deferral [ 3.108536] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.108707] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.108788] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.111786] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.112156] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.181850] VDD_5V0_HDMI_CON: disabling [ 3.185822] vdd_cam_1v8_reg: disabling [ 3.190036] vdd_hdmi_5v0: disabling [ 3.193744] usb1_vbus: disabling [ 3.197063] dvdd_ts: disabling [ 3.202270] ALSA device list: [ 3.205297] #0: NVIDIA Tegra Dalmore [ 3.211613] Waiting for root device /dev/mmcblk0p1... [ 3.397448] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.881101] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.892759] i2c 0-004c: Driver lm90 requests probe deferral [ 3.900289] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.905922] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.915754] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.922153] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.161951] usbcore: registered new interface driver usb-storage [ 1.173098] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.178309] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.183257] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.195792] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.201990] hub 1-0:1.0: USB hub found [ 1.205805] hub 1-0:1.0: 1 port detected [ 1.213487] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.218590] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.223516] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.235803] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.241956] hub 2-0:1.0: USB hub found [ 1.245751] hub 2-0:1.0: 1 port detected [ 1.250497] mousedev: PS/2 mouse device common for all mice [ 1.258756] i2c /dev entries driver [ 1.263479] usbcore: registered new interface driver uvcvideo [ 1.269259] USB Video Class driver (1.1.1) [ 1.273383] gspca_main: v2.14.0 registered [ 1.280201] sdhci: Secure Digital Host Controller Interface driver [ 1.286413] sdhci: Copyright(c) Pierre Ossman [ 1.291622] Synopsys Designware Multimedia Card Interface Driver [ 1.298626] usbcore: registered new interface driver usbhid [ 1.304228] usbhid: USB HID core driver [ 1.312878] TCP: cubic registered [ 1.316246] NET: Registered protocol family 17 [ 1.320720] can: controller area network core (rev 20120528 abi 9) [ 1.326980] NET: Registered protocol family 29 [ 1.331456] can: raw protocol (rev 20120528) [ 1.335741] can: broadcast manager protocol (rev 20120528 t) [ 1.341434] can: netlink gateway (rev 20130117) max_hops=1 [ 1.347332] Key type dns_resolver registered [ 1.351779] ThumbEE CPU extension supported. [ 1.356093] Registering SWP/SWPB emulation handler [ 1.362048] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.377248] ALSA device list: [ 1.380231] No soundcards found. [ 1.384328] Waiting for root device /dev/mmcblk0p2... [ 60.320916] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.248699] hub 1-0:1.0: USB hub found [ 2.252530] hub 1-0:1.0: 1 port detected [ 2.257547] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.265993] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.270544] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.278469] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.285126] [drm] No driver support for vblank timestamp query. [ 2.291117] host1x drm: No connectors reported connected with modes [ 2.297414] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.312363] Console: switching to colour frame buffer device 128x48 [ 2.325882] host1x drm: fb0: frame buffer device [ 2.330614] host1x drm: registered panic notifier [ 2.346926] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.353496] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.358934] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.366745] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.381914] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.388720] hub 2-0:1.0: USB hub found [ 2.392531] hub 2-0:1.0: 1 port detected [ 2.397633] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.404964] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.422948] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.427497] +1.8V_RUN_VPP_FUSE: disabling [ 2.431914] +2.8V_RUN_CAM_AF: disabling [ 2.436096] +3.3V_RUN_TOUCH: disabling [ 2.440217] +1.05V_RUN_CAM_REAR: disabling [ 2.444683] +VDDIO_SDMMC3: disabling [ 2.448408] +1.2V_RUN_CAM_FRONT: disabling [ 2.452632] +2.8V_RUN_CAM: disabling [ 2.456322] +1.8V_RUN_CAM: disabling [ 2.460026] +1.05V_RUN: disabling [ 2.463473] +USB0_VBUS_SW: disabling [ 2.467058] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.471928] ALSA device list: [ 2.474890] #0: NVIDIA Tegra Jetson TK1 [ 2.479508] Waiting for root device /dev/mmcblk0p1... [ 2.701899] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.164491] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.243779] hub 1-0:1.0: USB hub found [ 2.247609] hub 1-0:1.0: 1 port detected [ 2.252595] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.261040] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.265590] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.273518] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.280171] [drm] No driver support for vblank timestamp query. [ 2.286162] host1x drm: No connectors reported connected with modes [ 2.292458] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.307526] Console: switching to colour frame buffer device 128x48 [ 2.321034] host1x drm: fb0: frame buffer device [ 2.325766] host1x drm: registered panic notifier [ 2.341961] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.348526] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.353962] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.361840] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.376980] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.383779] hub 2-0:1.0: USB hub found [ 2.387592] hub 2-0:1.0: 1 port detected [ 2.392690] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.400036] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:21 UTC (949363221) [ 2.418110] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.422657] +1.8V_RUN_VPP_FUSE: disabling [ 2.427072] +2.8V_RUN_CAM_AF: disabling [ 2.431254] +3.3V_RUN_TOUCH: disabling [ 2.435371] +1.05V_RUN_CAM_REAR: disabling [ 2.439615] +VDDIO_SDMMC3: disabling [ 2.443320] +1.2V_RUN_CAM_FRONT: disabling [ 2.447542] +2.8V_RUN_CAM: disabling [ 2.451234] +1.8V_RUN_CAM: disabling [ 2.454937] +1.05V_RUN: disabling [ 2.458382] +USB0_VBUS_SW: disabling [ 2.461966] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.466834] ALSA device list: [ 2.469797] #0: NVIDIA Tegra Jetson TK1 [ 2.474413] Waiting for root device /dev/mmcblk0p1... [ 2.696968] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.159762] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.120565] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.127180] hub 3-0:1.0: USB hub found [ 2.130982] hub 3-0:1.0: 1 port detected [ 2.135998] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.143024] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-16 04:07:53 UTC (1402891673) [ 2.155645] vdd_1v2: disabling [ 2.158863] vdd_1v5: disabling [ 2.221969] ALSA device list: [ 2.224938] #0: NVIDIA Tegra Seaboard [ 2.229406] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.237159] Please append a correct "root=" boot option; here are the available partitions: [ 2.245517] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.253768] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140616 #1 [ 2.260916] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.268659] [<c0211c68>] (show_stack) from [<c0813db0>] (dump_stack+0x88/0x98) [ 2.275873] [<c0813db0>] (dump_stack) from [<c0810bf0>] (panic+0xa0/0x218) [ 2.282739] [<c0810bf0>] (panic) from [<c0adb0c4>] (mount_block_root+0x1a0/0x230) [ 2.290209] [<c0adb0c4>] (mount_block_root) from [<c0adb25c>] (mount_root+0x108/0x110) [ 2.298112] [<c0adb25c>] (mount_root) from [<c0adb3bc>] (prepare_namespace+0x158/0x1a0) [ 2.306102] [<c0adb3bc>] (prepare_namespace) from [<c0adad80>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.314958] [<c0adad80>] (kernel_init_freeable) from [<c080eee8>] (kernel_init+0x8/0xf0) [ 2.323038] [<c080eee8>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.330594] CPU1: stopping [ 2.333297] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-next-20140616 #1 [ 2.340431] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.348168] [<c0211c68>] (show_stack) from [<c0813db0>] (dump_stack+0x88/0x98) [ 2.355380] [<c0813db0>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.362763] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.370319] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.377783] Exception stack(0xea087f68 to 0xea087fb0) [ 2.382824] 7f60: 00000000 c0bc3fb4 c0bc3fb4 0000004c 8ae12190 00000000 [ 2.390985] 7f80: 8ae1f868 00000000 eafb6db0 ea086000 00000000 c0821050 00000015 ea087fb0 [ 2.399144] 7fa0: c06b3e9c c06b3ea8 60000113 ffffffff [ 2.404194] [<c02127c0>] (__irq_svc) from [<c06b3ea8>] (cpuidle_enter_state+0x68/0x100) [ 2.412193] [<c06b3ea8>] (cpuidle_enter_state) from [<c027f2a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.420964] [<c027f2a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.427736] drm_kms_helper: panic occurred, switching back to text console [ 2.434619] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627502] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635406] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647338] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654663] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.666137] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674652] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686584] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693908] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705383] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.713195] HS USB OTG: no transceiver configured [ 3.717895] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725738] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733673] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745605] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752899] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764404] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772918] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784851] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.792144] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803649] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811462] HS USB OTG: no transceiver configured [ 3.816162] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.824005] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831909] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843841] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.851165] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862640] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.871185] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.883117] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890411] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901885] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909698] HS USB OTG: no transceiver configured [ 3.914428] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.922271] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.930175] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.942108] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949401] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960876] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.065076] ohci-platform: OHCI generic platform driver [ 1.070474] ohci-omap3: OHCI OMAP3 driver [ 1.074642] SPEAr-ohci: OHCI SPEAr driver [ 1.079460] usbcore: registered new interface driver usb-storage [ 1.090473] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.095553] ci_hdrc ci_hdrc.0: no supported roles [ 1.100382] 2184200.usb supply vbus not found, using dummy regulator [ 1.110483] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.115567] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.120484] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.132816] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.139017] hub 1-0:1.0: USB hub found [ 1.142827] hub 1-0:1.0: 1 port detected [ 1.147538] mousedev: PS/2 mouse device common for all mice [ 1.155675] i2c /dev entries driver [ 1.160368] usbcore: registered new interface driver uvcvideo [ 1.166142] USB Video Class driver (1.1.1) [ 1.170266] gspca_main: v2.14.0 registered [ 1.177047] sdhci: Secure Digital Host Controller Interface driver [ 1.183253] sdhci: Copyright(c) Pierre Ossman [ 1.188459] Synopsys Designware Multimedia Card Interface Driver [ 1.195419] usbcore: registered new interface driver usbhid [ 1.201018] usbhid: USB HID core driver [ 1.209356] TCP: cubic registered [ 1.212696] NET: Registered protocol family 17 [ 1.217189] can: controller area network core (rev 20120528 abi 9) [ 1.223441] NET: Registered protocol family 29 [ 1.227914] can: raw protocol (rev 20120528) [ 1.232198] can: broadcast manager protocol (rev 20120528 t) [ 1.237887] can: netlink gateway (rev 20130117) max_hops=1 [ 1.243766] Key type dns_resolver registered [ 1.248515] ThumbEE CPU extension supported. [ 1.252827] Registering SWP/SWPB emulation handler [ 1.258724] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.273914] ALSA device list: [ 1.276899] No soundcards found. [ 1.280882] Waiting for root device /dev/mmcblk0p2... [ 60.322935] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

11 years, 5 months

next build: 444 warnings 0 failures (next/next-20140616)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: c6b4752 Add linux-next specific files for 20140616 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140616/ Runtime: 42m 30s Passed: 126 Failed: 0 Warnings: 444 Section mismatches: 16 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 include/linux/of.h:772:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 22 include/linux/ftrace.h:623:60: warning: unsupported argument to '__builtin_return_address' [enabled by default] 86 mm/madvise.c:145:9: warning: unused variable 'orig_pte' [-Wunused-variable] 92 arch/arm/include/asm/pgtable.h:206:50: warning: value computed is not used [-Wunused-value] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4ae8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x3640): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25828): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3df30): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x75c0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x86070): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3deac): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x757c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85aec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x727c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x36c8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d97c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 23 passed 18 failed (mainline/v3.15-12066-gdd1845a)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:30.63 capri bcm_defconfig : FAILED 1:24.17 capri multi_v7_defconfig : FAILED 1:24.69 cubox multi_v7_defconfig : FAILED 1:32.80 dalmore multi_v7_defconfig : FAILED 1:32.56 dalmore multi_lpae_defconfig : FAILED 1:31.19 hummingboard multi_v7_defconfig : FAILED 1:26.82 jetson multi_v7_defconfig : FAILED 1:26.25 jetson multi_lpae_defconfig : FAILED 1:26.04 omap5uevm omap2plus_defconfig : FAILED 1:45.52 omap5uevm multi_v7_defconfig : FAILED 1:49.52 omap5uevm multi_lpae_defconfig : FAILED 1:48.39 sama5 sama5_defconfig : FAILED 3:01.22 seaboard multi_v7_defconfig : FAILED 0:34.49 snow multi_v7_defconfig : FAILED 1:13.48 snow multi_lpae_defconfig : FAILED 1:14.15 snowball u8500_defconfig : FAILED 1:53.48 wandboard multi_v7_defconfig : FAILED 1:36.72 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.31 arndale exynos_defconfig : passed 1:18.36 arndale multi_v7_defconfig : passed 1:34.65 arndale multi_lpae_defconfig : passed 1:23.31 bbb omap2plus_defconfig : passed 1:35.09 bbb multi_v7_defconfig : passed 1:19.62 beaver tegra_defconfig : passed 1:02.05 cubie sunxi_defconfig : passed 1:30.77 cubie multi_v7_defconfig : passed 1:31.17 cubie2 sunxi_defconfig : passed 1:34.72 cubie2 multi_v7_defconfig : passed 1:23.46 cubie2 multi_lpae_defconfig : passed 1:43.05 dalmore tegra_defconfig : passed 1:31.17 hummingboard imx_v6_v7_defconfig : passed 1:30.79 jetson tegra_defconfig : passed 3:54.37 panda omap2plus_defconfig : warnings 1:30.22 panda multi_v7_defconfig : warnings 1:51.71 seaboard tegra_defconfig : passed 1:03.21 snow exynos_defconfig : passed 1:29.42 snowball multi_v7_defconfig : passed 5:07.91 trimslice tegra_defconfig : passed 3:56.67 trimslice multi_v7_defconfig : passed 3:49.93 wandboard imx_v6_v7_defconfig : passed 1:08.55 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.570573] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.576666] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.581631] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.587725] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.595477] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.602587] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.608180] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.614564] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.624561] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.634933] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.641562] [drm] No driver support for vblank timestamp query. [ 3.647512] host1x drm: No connectors reported connected with modes [ 3.653777] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.676854] Console: switching to colour frame buffer device 128x48 [ 3.688575] host1x drm: fb0: frame buffer device [ 3.693271] host1x drm: registered panic notifier [ 3.708604] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.714871] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.722326] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.733836] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.739243] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.747044] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.758211] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.764568] hub 1-0:1.0: USB hub found [ 3.768346] hub 1-0:1.0: 1 port detected [ 3.772731] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.778143] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.785902] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.798592] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.804897] hub 2-0:1.0: USB hub found [ 3.808667] hub 2-0:1.0: 1 port detected [ 3.816600] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.829406] usb1_vbus: disabling [ 3.832815] ALSA device list: [ 3.835812] #0: NVIDIA Tegra Beaver [ 3.840040] Waiting for root device /dev/mmcblk0p1... [ 4.118616] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.587386] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1800 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.225802] hub 2-0:1.0: 1 port detected [ 1.230175] SPEAr-ehci: EHCI SPEAr driver [ 1.234289] tegra-ehci: Tegra EHCI driver [ 1.238427] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244614] ohci-pci: OHCI PCI platform driver [ 1.249121] ohci-platform: OHCI generic platform driver [ 1.254437] ohci-omap3: OHCI OMAP3 driver [ 1.258543] SPEAr-ohci: OHCI SPEAr driver [ 1.263285] usbcore: registered new interface driver usb-storage [ 1.270838] mousedev: PS/2 mouse device common for all mice [ 1.277859] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287181] i2c /dev entries driver [ 1.292810] usbcore: registered new interface driver uvcvideo [ 1.298560] USB Video Class driver (1.1.1) [ 1.302660] gspca_main: v2.14.0 registered [ 1.309948] orion_wdt: Initial timeout 25 sec [ 1.315414] sdhci: Secure Digital Host Controller Interface driver [ 1.321577] sdhci: Copyright(c) Pierre Ossman [ 1.326491] Synopsys Designware Multimedia Card Interface Driver [ 1.333178] usbcore: registered new interface driver usbhid [ 1.338736] usbhid: USB HID core driver [ 1.347393] TCP: cubic registered [ 1.350745] NET: Registered protocol family 17 [ 1.355197] can: controller area network core (rev 20120528 abi 9) [ 1.361439] NET: Registered protocol family 29 [ 1.365880] can: raw protocol (rev 20120528) [ 1.370143] can: broadcast manager protocol (rev 20120528 t) [ 1.375791] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381679] Key type dns_resolver registered [ 1.386159] ThumbEE CPU extension supported. [ 1.390439] Registering SWP/SWPB emulation handler [ 1.395228] PJ4 iWMMXt v2 coprocessor enabled. [ 1.400837] USB Power: 5000 mV [ 1.404358] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-16 03:18:56 UTC (1402888736) [ 1.414870] ALSA device list: [ 1.417851] No soundcards found. [ 1.421767] ata1: SATA link down (SStatus 0 SControl F300) [ 1.427363] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.972982] i2c 0-004c: Driver lm90 requests probe deferral [ 2.980269] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.985867] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.995664] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.002118] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.012561] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.018189] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.027657] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.041838] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.051781] hub 1-0:1.0: USB hub found [ 3.055777] hub 1-0:1.0: 1 port detected [ 3.062261] i2c 0-004c: Driver lm90 requests probe deferral [ 3.069785] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.075421] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.085390] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.091903] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.104088] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.113423] i2c 0-004c: Driver lm90 requests probe deferral [ 3.121049] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.121301] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.121497] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.124507] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.124758] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.194046] VDD_5V0_HDMI_CON: disabling [ 3.198009] vdd_cam_1v8_reg: disabling [ 3.202684] vdd_hdmi_5v0: disabling [ 3.206226] usb1_vbus: disabling [ 3.209637] dvdd_ts: disabling [ 3.215762] ALSA device list: [ 3.218926] #0: NVIDIA Tegra Dalmore [ 3.225260] Waiting for root device /dev/mmcblk0p1... [ 3.366813] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.839882] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.852011] i2c 0-004c: Driver lm90 requests probe deferral [ 3.859711] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.865338] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.875274] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.881757] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.965522] i2c 0-004c: Driver lm90 requests probe deferral [ 2.973035] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.978652] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.988592] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.995057] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.005437] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.011061] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.021130] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.037172] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.046493] hub 1-0:1.0: USB hub found [ 3.050527] hub 1-0:1.0: 1 port detected [ 3.056564] i2c 0-004c: Driver lm90 requests probe deferral [ 3.063829] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.069376] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.079326] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.085759] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.097450] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.105606] i2c 0-004c: Driver lm90 requests probe deferral [ 3.113332] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.119062] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.126129] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.163152] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.163346] VDD_5V0_HDMI_CON: disabling [ 3.163364] vdd_cam_1v8_reg: disabling [ 3.169646] vdd_hdmi_5v0: disabling [ 3.169664] usb1_vbus: disabling [ 3.169682] dvdd_ts: disabling [ 3.189999] ALSA device list: [ 3.193096] #0: NVIDIA Tegra Dalmore [ 3.197396] plagra-hdmi requests probe deferral [ 3.202511] Waiting for root device /dev/mmcblk0p1... [ 3.372269] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.855725] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.867326] i2c 0-004c: Driver lm90 requests probe deferral [ 3.874835] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.880467] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.890248] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.896646] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031624] usbcore: registered new interface driver usb-storage [ 1.042776] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047986] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052928] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065299] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071494] hub 1-0:1.0: USB hub found [ 1.075308] hub 1-0:1.0: 1 port detected [ 1.082981] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.088085] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.093009] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105307] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111451] hub 2-0:1.0: USB hub found [ 1.115251] hub 2-0:1.0: 1 port detected [ 1.120034] mousedev: PS/2 mouse device common for all mice [ 1.128292] i2c /dev entries driver [ 1.133001] usbcore: registered new interface driver uvcvideo [ 1.138781] USB Video Class driver (1.1.1) [ 1.142905] gspca_main: v2.14.0 registered [ 1.149699] sdhci: Secure Digital Host Controller Interface driver [ 1.155913] sdhci: Copyright(c) Pierre Ossman [ 1.161116] Synopsys Designware Multimedia Card Interface Driver [ 1.168072] usbcore: registered new interface driver usbhid [ 1.173674] usbhid: USB HID core driver [ 1.182448] TCP: cubic registered [ 1.185816] NET: Registered protocol family 17 [ 1.190300] can: controller area network core (rev 20120528 abi 9) [ 1.196561] NET: Registered protocol family 29 [ 1.201035] can: raw protocol (rev 20120528) [ 1.205331] can: broadcast manager protocol (rev 20120528 t) [ 1.211022] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216898] Key type dns_resolver registered [ 1.221347] ThumbEE CPU extension supported. [ 1.225663] Registering SWP/SWPB emulation handler [ 1.231647] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246654] ALSA device list: [ 1.249636] No soundcards found. [ 1.253750] Waiting for root device /dev/mmcblk0p2... [ 60.325421] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.063274] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.071497] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.081088] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.087286] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.095444] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.100903] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.108659] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.121915] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.128731] hub 2-0:1.0: USB hub found [ 2.132538] hub 2-0:1.0: 1 port detected [ 2.137243] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.141783] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.149345] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.157575] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.167223] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.173419] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.181712] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.188964] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.193573] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.193616] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.209742] +5V_HDMI_CON: disabling [ 2.209747] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.209778] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.230101] +USB0_VBUS_SW: disabling [ 2.233719] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.238493] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.238681] ALSA device list: [ 2.238686] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.256393] Waiting for root device /dev/mmcblk0p1... [ 2.446944] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.909538] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.920730] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.925329] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.932859] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.941056] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.950600] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.956783] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.053354] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.061576] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.071145] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.077345] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.085516] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.090973] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.098789] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.112058] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.118863] hub 2-0:1.0: USB hub found [ 2.122670] hub 2-0:1.0: 1 port detected [ 2.127364] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.131864] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.139428] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.147655] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.157305] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.163502] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.171672] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.178950] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.179154] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.192122] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.199646] +5V_HDMI_CON: disabling [ 2.199651] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.199679] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.219989] +USB0_VBUS_SW: disabling [ 2.223604] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.228381] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.228569] ALSA device list: [ 2.228573] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.246290] Waiting for root device /dev/mmcblk0p1... [ 2.437086] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.899874] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.910984] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.915574] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.923105] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.931301] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.940810] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.946966] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.072007] can: raw protocol (rev 20120528) [ 47.072013] can: broadcast manager protocol (rev 20120528 t) [ 47.072022] can: netlink gateway (rev 20130117) max_hops=1 [ 47.072318] Key type dns_resolver registered [ 47.072403] omap_vc_init_channel: No PMIC info for vdd_core [ 47.072405] omap_vp_init: No PMIC info for vdd_core [ 47.072409] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072410] omap_vp_init: No PMIC info for vdd_mm [ 47.072414] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072415] omap_vp_init: No PMIC info for vdd_mpu [ 47.072729] ThumbEE CPU extension supported. [ 47.072744] Registering SWP/SWPB emulation handler [ 47.077619] palmas 0-0048: Irq flag is 0x00000000 [ 47.149263] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.150115] mmc0: new high speed MMC card at address 0001 [ 47.150375] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.151716] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.156713] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.157298] mmcblk0: unknown partition table [ 47.158083] mmcblk0boot1: unknown partition table [ 47.158827] mmcblk0boot0: unknown partition table [ 47.194098] smps123: 600 <--> 1500 mV at 1060 mV [ 47.200231] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206654] smps6: 1200 mV [ 47.210620] smps7: 1800 mV [ 47.214727] smps8: 600 <--> 1310 mV at 1040 mV [ 47.220475] smps9: failed to get the current voltage [ 47.225724] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.237773] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.366895] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.511907] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.517991] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.525432] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.532291] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.540016] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.553476] ALSA device list: [ 47.556570] No soundcards found. [ 47.560573] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.523139] TCP: cubic registered [ 47.523147] NET: Registered protocol family 17 [ 47.523164] can: controller area network core (rev 20120528 abi 9) [ 47.523212] NET: Registered protocol family 29 [ 47.523219] can: raw protocol (rev 20120528) [ 47.523225] can: broadcast manager protocol (rev 20120528 t) [ 47.523234] can: netlink gateway (rev 20130117) max_hops=1 [ 47.523532] Key type dns_resolver registered [ 47.523609] omap_vc_init_channel: No PMIC info for vdd_core [ 47.523611] omap_vp_init: No PMIC info for vdd_core [ 47.523614] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.523616] omap_vp_init: No PMIC info for vdd_mm [ 47.523620] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.523621] omap_vp_init: No PMIC info for vdd_mpu [ 47.523933] ThumbEE CPU extension supported. [ 47.523948] Registering SWP/SWPB emulation handler [ 47.532513] palmas 0-0048: Irq flag is 0x00000000 [ 47.614831] mmcblk0: unknown partition table [ 47.620185] mmcblk0boot1: unknown partition table [ 47.625965] mmcblk0boot0: unknown partition table [ 47.631137] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.638720] smps123: 600 <--> 1500 mV at 1060 mV [ 47.644842] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651269] smps6: 1200 mV [ 47.655243] smps7: 1800 mV [ 47.659366] smps8: 600 <--> 1310 mV at 1040 mV [ 47.665098] smps9: failed to get the current voltage [ 47.670343] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.682410] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.806800] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.814701] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.820791] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.828238] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.835086] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.842789] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.856220] ALSA device list: [ 47.859325] No soundcards found. [ 47.863321] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.921276] NET: Registered protocol family 17 [ 1.921328] NET: Registered protocol family 15 [ 1.921498] Key type dns_resolver registered [ 1.921598] omap_vc_init_channel: No PMIC info for vdd_core [ 1.921602] omap_vp_init: No PMIC info for vdd_core [ 1.921612] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.921615] omap_vp_init: No PMIC info for vdd_mm [ 1.921624] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.921627] omap_vp_init: No PMIC info for vdd_mpu [ 1.922197] ThumbEE CPU extension supported. [ 1.922222] Registering SWP/SWPB emulation handler [ 1.922234] SmartReflex Class3 initialized [ 1.941007] palmas 0-0048: Irq flag is 0x00000000 [ 2.023919] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.030810] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.039859] mmcblk0: unknown partition table [ 2.046349] mmcblk0boot1: unknown partition table [ 2.053489] mmcblk0boot0: unknown partition table [ 2.058903] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.111204] smps123: 600 <--> 1500 mV at 1060 mV [ 2.118257] smps45: 600 <--> 1310 mV at 1030 mV [ 2.125628] smps6: 1200 mV [ 2.130420] smps7: 1800 mV [ 2.135344] smps8: 600 <--> 1310 mV at 1040 mV [ 2.141838] smps9: failed to get the current voltage [ 2.147782] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.162135] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.170973] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.178700] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.184864] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.194003] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.203397] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.210362] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.218914] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.227581] sr_init: No PMIC hook to init smartreflex [ 2.233044] sr_init: platform driver register failed for SR [ 2.261437] pbias_mmc_omap5: disabling [ 2.266986] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[708]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3490 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.120655] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.127280] hub 3-0:1.0: USB hub found [ 2.131082] hub 3-0:1.0: 1 port detected [ 2.136117] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.143150] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-16 03:19:43 UTC (1402888783) [ 2.155711] vdd_1v2: disabling [ 2.158930] vdd_1v5: disabling [ 2.222048] ALSA device list: [ 2.225016] #0: NVIDIA Tegra Seaboard [ 2.229495] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.237249] Please append a correct "root=" boot option; here are the available partitions: [ 2.245608] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.253860] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-12066-gdd1845a #1 [ 2.261093] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.268834] [<c0211c68>] (show_stack) from [<c0811ab8>] (dump_stack+0x88/0x98) [ 2.276047] [<c0811ab8>] (dump_stack) from [<c080e908>] (panic+0xa0/0x218) [ 2.282918] [<c080e908>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.290390] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.298294] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.306287] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.315144] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cc00>] (kernel_init+0x8/0xf0) [ 2.323222] [<c080cc00>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.330779] CPU1: stopping [ 2.333483] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-12066-gdd1845a #1 [ 2.340702] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.348437] [<c0211c68>] (show_stack) from [<c0811ab8>] (dump_stack+0x88/0x98) [ 2.355648] [<c0811ab8>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.363030] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.370586] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.378051] Exception stack(0xea087f68 to 0xea087fb0) [ 2.383092] 7f60: 00000000 c0bc1fb4 c0bc1fb4 0000004c 8ae12190 00000000 [ 2.391255] 7f80: 8ae36b80 00000000 eafb6db0 ea086000 00000000 c081f054 00000015 ea087fb0 [ 2.399414] 7fa0: c06b2fec c06b2ff8 60000113 ffffffff [ 2.404462] [<c02127c0>] (__irq_svc) from [<c06b2ff8>] (cpuidle_enter_state+0x68/0x100) [ 2.412460] [<c06b2ff8>] (cpuidle_enter_state) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.421230] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.428002] drm_kms_helper: panic occurred, switching back to text console [ 2.434884] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0add270 (9045 kB) [ 0.000000] .init : 0xc0ade000 - 0xc0b84100 ( 665 kB) [ 0.000000] .data : 0xc0b86000 - 0xc0c65140 ( 893 kB) [ 0.000000] .bss : 0xc0c65148 - 0xc0cb2088 ( 308 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.645200] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.645738] Console: colour dummy device 80x30 [ 2889.645749] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.645756] pid_max: default: 32768 minimum: 301 [ 2889.645817] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.645823] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.646090] CPU: Testing write buffer coherency: ok [ 2889.646200] CPU0: update cpu_capacity 1024 [ 2889.646206] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.646296] Setting up static identity map for 0x4081e508 - 0x4081e5a0 [ 2889.647378] CPU1: Booted secondary processor [ 2889.647411] CPU1: update cpu_capacity 1024 [ 2889.647415] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.647459] Brought up 2 CPUs [ 2889.647468] SMP: Total of 2 processors activated. [ 2889.647472] CPU: All CPU(s) started in HYP mode. [ 2889.647476] CPU: Virtualization extensions available. [ 2889.647717] devtmpfs: initialized [ 2889.649599] VFP support v0.3: implementor 41 architecture 4 pa~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.747667] pid_max: default: 32768 minimum: 301 [ 2889.747727] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.747733] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.748001] CPU: Testing write buffer coherency: ok [ 2889.748110] CPU0: update cpu_capacity 1024 [ 2889.748116] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.748213] Setting up static identity map for 0x40817538 - 0x408175d0 [ 2889.749314] CPU1: Booted secondary processor [ 2889.749348] CPU1: update cpu_capacity 1024 [ 2889.749351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.749395] Brought up 2 CPUs [ 2889.749404] SMP: Total of 2 processors activated. [ 2889.749408] CPU: All CPU(s) started in HYP mode. [ 2889.749411] CPU: Virtualization extensions available. [ 2889.749652] devtmpfs: initialized [ 2889.751553] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.751746] pinctrl core: initialized pinctrl subsystem [ 2889.751949] regulator-dummy: no parameters [ 2889.757836] NET: Registered protocol family 16 [ 2889.758720] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.759444] cpuidle: using governor ladder [ 2889.759451] cpuidle: using governor menu [ 2889.764486] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.768316] No ATAGs? [ 2889.768336] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.768341] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.768434] EXYNOS5250 PMU Initialize [ 2889.769639] Serial: AMBA PL011 UART driver [ 2920.594305] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594317] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594608] vbat-supply: no parameters [ 2920.594746] P5.0V_USB3CON: 5000 mV [ 2920.595900] vgaarb: loaded [ 2920.596181] SCSI subsystem initialized [ 2920.596261] libata version 3.00 loaded. [ 2920.596408] usbcore: registered new interface driver usbfs [ 2920.596437] usbcore: registered new interface driver hub [ 2920.596488] usbcore: registered new device driver usb [ 2920.5969~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.538604] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550537] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.557830] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569305] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.577880] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.589813] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597137] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608612] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616424] HS USB OTG: no transceiver configured [ 3.621154] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.628967] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.636901] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.648834] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656158] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667633] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676208] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688110] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695434] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.706909] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714721] HS USB OTG: no transceiver configured [ 3.719421] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727294] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735229] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747131] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754455] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.765930] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774536] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786437] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.793762] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805236] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813079] HS USB OTG: no transceiver configured [ 3.817779] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825622] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833557] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845489] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852783] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864288] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.872863] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070233] ohci-platform: OHCI generic platform driver [ 1.075630] ohci-omap3: OHCI OMAP3 driver [ 1.079797] SPEAr-ohci: OHCI SPEAr driver [ 1.084641] usbcore: registered new interface driver usb-storage [ 1.095695] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100775] ci_hdrc ci_hdrc.0: no supported roles [ 1.105607] 2184200.usb supply vbus not found, using dummy regulator [ 1.115708] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120791] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125709] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.142839] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.149035] hub 1-0:1.0: USB hub found [ 1.152861] hub 1-0:1.0: 1 port detected [ 1.157568] mousedev: PS/2 mouse device common for all mice [ 1.165713] i2c /dev entries driver [ 1.170403] usbcore: registered new interface driver uvcvideo [ 1.176178] USB Video Class driver (1.1.1) [ 1.180302] gspca_main: v2.14.0 registered [ 1.187028] sdhci: Secure Digital Host Controller Interface driver [ 1.193234] sdhci: Copyright(c) Pierre Ossman [ 1.198458] Synopsys Designware Multimedia Card Interface Driver [ 1.205386] usbcore: registered new interface driver usbhid [ 1.210981] usbhid: USB HID core driver [ 1.219402] TCP: cubic registered [ 1.222737] NET: Registered protocol family 17 [ 1.227224] can: controller area network core (rev 20120528 abi 9) [ 1.233480] NET: Registered protocol family 29 [ 1.237953] can: raw protocol (rev 20120528) [ 1.242235] can: broadcast manager protocol (rev 20120528 t) [ 1.247922] can: netlink gateway (rev 20130117) max_hops=1 [ 1.253828] Key type dns_resolver registered [ 1.258582] ThumbEE CPU extension supported. [ 1.262901] Registering SWP/SWPB emulation handler [ 1.269305] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.284344] ALSA device list: [ 1.287328] No soundcards found. [ 1.291321] Waiting for root device /dev/mmcblk0p2... [ 60.323340] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline boot: 33 boots: 33 pass, 0 fail (v3.15-12066-gdd1845a)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-12066-gdd1845a Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 15.0 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.6 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.5 sec: PASS imx6q-wandboard 0 min 14.0 sec: PASS arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.2 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.7 sec: PASS sun4i-a10-cubieboard 0 min 12.7 sec: PASS exynos5410-smdk5410 0 min 28.9 sec: PASS am335x-bone 0 min 23.5 sec: PASS tegra124-jetson-tk1 0 min 17.2 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 52.6 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.7 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.2 sec: PASS ste-snowball 1 min 11.9 sec: PASS tegra30-beaver 0 min 33.3 sec: PASS omap3-n900 0 min 16.2 sec: PASS qcom-apq8074-dragonboard 0 min 19.9 sec: PASS bcm28155-ap 0 min 25.9 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 55.9 sec: PASS exynos5420-arndale-octa 0 min 41.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 39.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.9 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.1 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.2 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.2 sec: PASS

11 years, 5 months

mainline build: 269 warnings 0 failures (mainline/v3.15-12066-gdd1845a)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: dd1845a Merge tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-12066-gdd1845a/ Runtime: 45m 43s Passed: 126 Failed: 0 Warnings: 269 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2575:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2547:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2549:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports