Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

queue boot: 9 passed 1 failed (queue/v3.10.44)

by Olof's autobooter

Failed boards: cubie multi_v7_defconfig : FAILED 0:25.04 Successful boards: arndale exynos_defconfig : passed 1:17.42 beaver tegra_defconfig : passed 0:44.71 cubox dove_defconfig : passed 1:03.46 dalmore tegra_defconfig : passed 1:04.88 panda omap2plus_defconfig : passed 1:32.18 sama5 sama5_defconfig : passed 1:59.22 seaboard tegra_defconfig : passed 0:54.63 snow exynos_defconfig : passed 1:34.84 trimslice tegra_defconfig : passed 0:55.78 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.44 #1 [<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c027b918>] (panic+0xa0/0x1e8) [<c027b918>] (panic+0xa0/0x1e8) from [<c032f164>] (mount_block_root+0x294/0x298) [<c032f164>] (mount_block_root+0x294/0x298) from [<c032f324>] (prepare_namespace+0x158/0x190) [<c032f324>] (prepare_namespace+0x158/0x190) from [<c032edb4>] (kernel_init_freeable+0x1c8/0x1d8) [<c032edb4>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0277684>] (kernel_init+0x8/0x158) [<c0277684>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic

11 years, 5 months

queue build: 23 warnings 0 failures (queue/v3.10.44)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 73eabc6 Linux 3.10.44 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.10.44/ Runtime: 32m 22s Passed: 121 Failed: 0 Warnings: 23 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/gpio/gpio-omap.c:1529:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:124:41: warning: statement with no effect [-Wunused-value] 1 include/linux/clocksource.h:345:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] Section mismatches:

11 years, 5 months

next boot: 64 boots: 63 pass, 1 fail (next-20140617)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140617 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.0 sec: PASS da850-evm 0 min 14.8 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.8 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.1 sec: PASS omap5-uevm 1 min 42.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS (Warnings: 1) arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.7 sec: PASS armada-370-mirabox 0 min 20.7 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.4 sec: PASS am335x-boneblack 0 min 22.2 sec: PASS omap3-beagle-xm 0 min 45.3 sec: PASS legacy,3530beagle 0 min 27.4 sec: PASS (Warnings: 1) omap4-panda 0 min 54.2 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 22.7 sec: PASS am335x-bone 0 min 24.0 sec: PASS omap3-overo-storm-tobi 0 min 21.8 sec: PASS omap5-uevm 0 min 52.4 sec: PASS (Warnings: 1) omap3-n900 0 min 16.7 sec: PASS legacy,n900 0 min 16.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.6 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.8 sec: PASS legacy,3530overo 0 min 20.9 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS (Warnings: 1) am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 13.1 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 32.2 sec: PASS (Warnings: 3) am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.9 sec: PASS armada-370-mirabox 0 min 21.9 sec: PASS omap4-panda 0 min 52.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.1 sec: PASS ste-snowball 1 min 11.5 sec: PASS tegra30-beaver 0 min 21.3 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 18.6 sec: PASS bcm28155-ap 0 min 24.9 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap3-beagle-xm 0 min 50.2 sec: PASS exynos5420-arndale-octa 0 min 42.2 sec: PASS (Warnings: 7) armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS omap5-uevm 1 min 44.4 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.6 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.8 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 11.6 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.5 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.2 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 40.6 sec: PASS (Warnings: 7) exynos5250-arndale 0 min 29.6 sec: PASS exynos5410-smdk5410 0 min 27.6 sec: PASS (Warnings: 3) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.4 sec: PASS armada-370-mirabox 0 min 22.6 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.503570] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511413] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519317] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531249] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538543] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.550048] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558563] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570495] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577789] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589294] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.597106] HS USB OTG: no transceiver configured [ 3.601806] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609649] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617584] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629516] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.636810] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648315] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.656829] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668731] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.676055] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687530] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695373] HS USB OTG: no transceiver configured [ 3.700073] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.707916] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.715850] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.727783] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.735076] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746582] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.755096] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.766998] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774322] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785797] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793640] HS USB OTG: no transceiver configured [ 3.798339] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806182] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.814117] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.53 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

mainline boot: 64 boots: 62 pass, 2 fail (v3.16-rc1-1-g68986c9)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.16-rc1-1-g68986c9 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 16.9 sec: PASS da850-evm 0 min 14.8 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS tegra30-beaver 0 min 20.8 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.0 sec: PASS omap5-uevm 1 min 40.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.4 sec: FAIL armada-370-mirabox 0 min 20.7 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 35.8 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 44.2 sec: PASS legacy,3530beagle 0 min 22.6 sec: PASS (Warnings: 1) omap4-panda 0 min 49.4 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.3 sec: PASS am335x-bone 0 min 28.9 sec: PASS omap3-overo-storm-tobi 0 min 21.1 sec: PASS omap5-uevm 0 min 49.7 sec: PASS (Warnings: 1) omap3-n900 0 min 16.7 sec: PASS legacy,n900 0 min 17.0 sec: PASS (Warnings: 1) omap4-panda-es 0 min 48.6 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.4 sec: PASS legacy,3530overo 0 min 20.9 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 14.8 sec: PASS am335x-boneblack 0 min 21.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.8 sec: PASS sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 28.9 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 52.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.1 sec: PASS ste-snowball 1 min 14.7 sec: PASS tegra30-beaver 0 min 17.2 sec: PASS omap3-n900 0 min 16.1 sec: PASS qcom-apq8074-dragonboard 0 min 19.0 sec: PASS bcm28155-ap 0 min 25.5 sec: PASS omap3-overo-tobi 0 min 22.4 sec: PASS omap3-overo-storm-tobi 0 min 23.6 sec: PASS omap3-beagle-xm 0 min 44.6 sec: PASS exynos5420-arndale-octa 0 min 40.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 36.8 sec: PASS (Warnings: 1) omap4-panda-es 0 min 55.5 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 32.7 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.5 sec: PASS sun4i-a10-cubieboard 0 min 11.3 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.4 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.8 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.9 sec: PASS exynos5250-arndale 0 min 29.7 sec: PASS exynos5410-smdk5410 0 min 27.7 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.8 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.6 sec: PASS armada-370-mirabox 0 min 23.0 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.4 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 55048012 02109471 [<c0186a38>] (_set_bit) from [<c01c9d5c>] (n_tty_set_termios+0x234/0x348) [<c01c9d5c>] (n_tty_set_termios) from [<c01c9f5c>] (n_tty_open+0xec/0x114) [<c01c9f5c>] (n_tty_open) from [<c01cd9b8>] (tty_ldisc_open+0x3c/0x78) [<c01cd9b8>] (tty_ldisc_open) from [<c01ce134>] (tty_ldisc_setup+0x18/0x5c) [<c01ce134>] (tty_ldisc_setup) from [<c01c6da8>] (tty_init_dev+0x94/0x184) [<c01c6da8>] (tty_init_dev) from [<c01c76b4>] (tty_open+0x2d0/0x5a8) [<c01c76b4>] (tty_open) from [<c00af400>] (chrdev_open+0xc4/0x184) [<c00af400>] (chrdev_open) from [<c00a9b24>] (do_dentry_open.isra.12+0x1b0/0x2f0) [<c00a9b24>] (do_dentry_open.isra.12) from [<c00a9d34>] (finish_open+0x20/0x38) [<c00a9d34>] (finish_open) from [<c00b7e08>] (do_last.isra.41+0x5a4/0xb50) [<c00b7e08>] (do_last.isra.41) from [<c00b8468>] (path_openat+0xb4/0x5c8) [<c00b8468>] (path_openat) from [<c00b8c80>] (do_filp_open+0x2c/0x80) [<c00b8c80>] (do_filp_open) from [<c00aac8c>] (do_sys_open+0x110/0x1cc) [<c00aac8c>] (do_sys_open) from [<c0581cb0>] (kernel_init_freeable+0x128/0x1c8) [<c0581cb0>] (kernel_init_freeable) from [<c0422f78>] (kernel_init+0x8/0xec) [<c0422f78>] (kernel_init) from [<c000e638>] (ret_from_fork+0x14/0x3c) Code: 00f091f5 1233a0e1 9f2f91e1 032082e1 (920f81e1) ---[ end trace 712f6fee5e845cf0 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.16.0-rc1-00001-g68986c9 #1 [<c0014b04>] (unwind_backtrace) from [<c0010eb0>] (show_stack+0x10/0x14) [<c0010eb0>] (show_stack) from [<c0425f40>] (dump_stack+0x74/0x90) [<c0425f40>] (dump_stack) from [<c00139dc>] (handle_IPI+0x134/0x170) [<c00139dc>] (handle_IPI) from [<c0008650>] (armada_370_xp_handle_irq+0xb0/0xcc) [<c0008650>] (armada_370_xp_handle_irq) from [<c0011980>] (__irq_svc+0x40/0x50) Exception stack(0xed87dfa8 to 0xed87dff0) dfa0: edfd53d8 00000000 00000d30 00000000 ed87c000 c05c049c dfc0: c042cd88 c05f4fd5 c05f4fd5 562f5842 00000001 00000000 00000000 ed87dff0 dfe0: c000f168 c004eba8 60000313 ffffffff [<c0011980>] (__irq_svc) from [<c004eba8>] (cpu_startup_entry+0xe8/0x140) [<c004eba8>] (cpu_startup_entry) from [<00008768>] (0x8768) ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 23.42 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.502990] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.510955] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.522857] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.530181] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.541656] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.550262] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.562194] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.569488] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.580963] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.588775] HS USB OTG: no transceiver configured [ 3.593505] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.601348] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.609283] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.621215] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.628509] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.639984] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.648590] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.660522] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.667816] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.679321] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.687133] HS USB OTG: no transceiver configured [ 3.691833] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.699676] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.707611] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.719543] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.726867] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.738342] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.746948] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.758850] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.766174] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.777679] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.785491] HS USB OTG: no transceiver configured [ 3.790191] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.798034] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.805999] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.817901] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.46 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

mainline boot: 23 passed 18 failed (mainline/v3.16-rc1-2-gebe0618)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:32.83 capri bcm_defconfig : FAILED 1:23.88 capri multi_v7_defconfig : FAILED 1:25.85 cubox multi_v7_defconfig : FAILED 1:35.54 dalmore multi_v7_defconfig : FAILED 1:33.80 dalmore multi_lpae_defconfig : FAILED 1:34.33 hummingboard imx_v6_v7_defconfig : FAILED 1:32.92 hummingboard multi_v7_defconfig : FAILED 1:24.73 jetson multi_v7_defconfig : FAILED 1:30.71 jetson multi_lpae_defconfig : FAILED 1:26.85 omap5uevm omap2plus_defconfig : FAILED 1:43.86 omap5uevm multi_v7_defconfig : FAILED 1:49.43 omap5uevm multi_lpae_defconfig : FAILED 1:44.45 seaboard multi_v7_defconfig : FAILED 0:38.26 snow multi_v7_defconfig : FAILED 1:13.87 snow multi_lpae_defconfig : FAILED 1:13.98 snowball u8500_defconfig : FAILED 1:51.71 wandboard multi_v7_defconfig : FAILED 1:50.22 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:10.68 arndale exynos_defconfig : passed 1:16.48 arndale multi_v7_defconfig : passed 1:39.59 arndale multi_lpae_defconfig : passed 1:21.10 bbb omap2plus_defconfig : passed 1:29.10 bbb multi_v7_defconfig : passed 1:30.35 beaver tegra_defconfig : passed 1:08.01 cubie sunxi_defconfig : passed 1:14.26 cubie multi_v7_defconfig : warnings 1:33.71 cubie2 sunxi_defconfig : passed 1:03.34 cubie2 multi_v7_defconfig : passed 1:43.81 cubie2 multi_lpae_defconfig : passed 1:22.56 dalmore tegra_defconfig : passed 1:30.07 jetson tegra_defconfig : passed 0:57.20 panda omap2plus_defconfig : warnings 1:33.43 panda multi_v7_defconfig : warnings 1:47.12 sama5 sama5_defconfig : warnings 1:57.33 seaboard tegra_defconfig : passed 1:03.18 snow exynos_defconfig : passed 1:21.52 snowball multi_v7_defconfig : passed 4:55.37 trimslice tegra_defconfig : passed 1:04.48 trimslice multi_v7_defconfig : passed 1:16.71 wandboard imx_v6_v7_defconfig : passed 1:03.28 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.577130] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.583218] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.588170] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.594256] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.601999] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.609102] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.614694] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.621074] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.631068] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.641175] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.647819] [drm] No driver support for vblank timestamp query. [ 3.653768] host1x drm: No connectors reported connected with modes [ 3.660032] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.683295] Console: switching to colour frame buffer device 128x48 [ 3.695012] host1x drm: fb0: frame buffer device [ 3.699709] host1x drm: registered panic notifier [ 3.718614] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.724876] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.732326] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.743803] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.749210] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.757019] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.768221] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.774577] hub 1-0:1.0: USB hub found [ 3.778353] hub 1-0:1.0: 1 port detected [ 3.782726] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.788139] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.795870] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.808604] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.814893] hub 2-0:1.0: USB hub found [ 3.818678] hub 2-0:1.0: 1 port detected [ 3.826514] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.839324] usb1_vbus: disabling [ 3.842731] ALSA device list: [ 3.845710] #0: NVIDIA Tegra Beaver [ 3.849949] Waiting for root device /dev/mmcblk0p1... [ 4.128629] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.597501] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1800 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.226048] hub 2-0:1.0: 1 port detected [ 1.230430] SPEAr-ehci: EHCI SPEAr driver [ 1.234543] tegra-ehci: Tegra EHCI driver [ 1.238678] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244860] ohci-pci: OHCI PCI platform driver [ 1.249367] ohci-platform: OHCI generic platform driver [ 1.254682] ohci-omap3: OHCI OMAP3 driver [ 1.258789] SPEAr-ohci: OHCI SPEAr driver [ 1.263532] usbcore: registered new interface driver usb-storage [ 1.271080] mousedev: PS/2 mouse device common for all mice [ 1.278104] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287427] i2c /dev entries driver [ 1.292896] usbcore: registered new interface driver uvcvideo [ 1.298649] USB Video Class driver (1.1.1) [ 1.302743] gspca_main: v2.14.0 registered [ 1.309988] orion_wdt: Initial timeout 25 sec [ 1.315505] sdhci: Secure Digital Host Controller Interface driver [ 1.321666] sdhci: Copyright(c) Pierre Ossman [ 1.326579] Synopsys Designware Multimedia Card Interface Driver [ 1.333267] usbcore: registered new interface driver usbhid [ 1.338826] usbhid: USB HID core driver [ 1.346664] TCP: cubic registered [ 1.349973] NET: Registered protocol family 17 [ 1.354445] can: controller area network core (rev 20120528 abi 9) [ 1.360683] NET: Registered protocol family 29 [ 1.365109] can: raw protocol (rev 20120528) [ 1.369372] can: broadcast manager protocol (rev 20120528 t) [ 1.375026] can: netlink gateway (rev 20130117) max_hops=1 [ 1.380913] Key type dns_resolver registered [ 1.385391] ThumbEE CPU extension supported. [ 1.389659] Registering SWP/SWPB emulation handler [ 1.394451] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399154] ata1: SATA link down (SStatus 0 SControl F300) [ 1.405655] USB Power: 5000 mV [ 1.409183] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-17 04:34:43 UTC (1402979683) [ 1.419698] ALSA device list: [ 1.422675] No soundcards found. [ 1.426604] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.981685] i2c 0-004c: Driver lm90 requests probe deferral [ 2.989041] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.994635] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.004571] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.011023] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.021294] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.026927] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.037068] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.051928] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.061781] hub 1-0:1.0: USB hub found [ 3.065764] hub 1-0:1.0: 1 port detected [ 3.072113] i2c 0-004c: Driver lm90 requests probe deferral [ 3.079461] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.085062] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.094867] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.101324] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.113057] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.121257] i2c 0-004c: Driver lm90 requests probe deferral [ 3.129148] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.134658] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.171376] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.171527] VDD_5V0_HDMI_CON: disabling [ 3.171546] vdd_cam_1v8_reg: disabling [ 3.178735] vdd_hdmi_5v0: disabling [ 3.178753] usb1_vbus: disabling [ 3.178771] dvdd_ts: disabling [ 3.200072] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.200621] ALSA device list: [ 3.200637] #0: NVIDIA Tegra Dalmore [ 3.213474] platfa-hdmi requests probe deferral [ 3.218573] Waiting for root device /dev/mmcblk0p1... [ 3.382006] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.866237] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.877844] i2c 0-004c: Driver lm90 requests probe deferral [ 3.885407] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.891045] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.900978] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.907461] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.961686] i2c 0-004c: Driver lm90 requests probe deferral [ 2.969014] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.974620] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.984586] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.991052] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.001453] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.007079] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.016437] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.032077] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.041385] hub 1-0:1.0: USB hub found [ 3.045400] hub 1-0:1.0: 1 port detected [ 3.051436] i2c 0-004c: Driver lm90 requests probe deferral [ 3.058725] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.064271] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.074228] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.080656] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.092365] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.100559] i2c 0-004c: Driver lm90 requests probe deferral [ 3.108368] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.108458] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.145385] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.145491] VDD_5V0_HDMI_CON: disabling [ 3.145509] vdd_cam_1v8_reg: disabling [ 3.152741] vdd_hdmi_5v0: disabling [ 3.152759] usb1_vbus: disabling [ 3.152776] dvdd_ts: disabling [ 3.172244] ALSA device list: [ 3.173718] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.173972] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.188693] #0: NVIDIA Tegra Dalmore [ 3.194888] Waiting for root device /dev/mmcblk0p1... [ 3.357363] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.836907] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.848513] i2c 0-004c: Driver lm90 requests probe deferral [ 3.856118] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.861759] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.871701] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.878185] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- r4:9ebc4b00 r3:00000020 [<80675c60>] (__schedule) from [<80676270>] (schedule+0x38/0x84) r10:9e478000 r9:9e4b57b8 r8:9e4b57c0 r7:9e4b599c r6:9e4b57b8 r5:9e4b599c r4:00000001 [<80676238>] (schedule) from [<8002bc0c>] (do_exit+0x6dc/0x970) [<8002b530>] (do_exit) from [<80012908>] (die+0x208/0x3d0) r7:80911624 [<80012700>] (die) from [<8066de98>] (__do_kernel_fault.part.11+0x5c/0x7c) r10:9dc25800 r9:9e4b57c0 r8:1dc898eb r7:9e5a3d90 r6:00000000 r5:00000005 r4:1dc898eb [<8066de3c>] (__do_kernel_fault.part.11) from [<8001ca3c>] (do_page_fault+0x1bc/0x3ec) r7:00000005 r3:9e5a3d90 [<8001c880>] (do_page_fault) from [<8001cdc8>] (do_translation_fault+0xb4/0xc0) r10:9dc25800 r9:00000000 r8:9e5a3d90 r7:1dc898eb r6:80912434 r5:8001cd14 r4:00000005 [<8001cd14>] (do_translation_fault) from [<80008494>] (do_DataAbort+0x3c/0xa0) r7:1dc898eb r6:80912434 r5:8001cd14 r4:00000005 [<80008458>] (do_DataAbort) from [<800131e4>] (__dabt_svc+0x44/0x80) Exception stack(0x9e5a3d90 to 0x9e5a3dd8) 3d80: 00000ffd a14bf000 00000000 00001400 3da0: a14bf000 00000ffc 1dc898eb 00000ffd 1dc897eb 00000000 9dc25800 9e5a3e34 3dc0: a14bf014 9e5a3dd8 80312060 803126cc 20000013 ffffffff r8:1dc897eb r7:9e5a3dc4 r6:ffffffff r5:20000013 r4:803126cc [<80312010>] (n_tty_receive_buf_common) from [<80312950>] (n_tty_receive_buf2+0x1c/0x24) r10:00000000 r9:9d407a00 r8:9e66a000 r7:9e66a024 r6:9dc25800 r5:9e66a004 r4:9dc26c00 [<80312934>] (n_tty_receive_buf2) from [<80315dd0>] (flush_to_ldisc+0xdc/0x128) [<80315cf4>] (flush_to_ldisc) from [<80041318>] (process_one_work+0x19c/0x45c) r10:00000000 r9:00000001 r8:9ebc7a00 r7:9e5a3ea0 r6:9ebc4500 r5:9e66a004 r4:9e57ee80 r3:80315cf4 [<8004117c>] (process_one_work) from [<80041e78>] (worker_thread+0x14c/0x5a8) r10:9e57ee80 r9:9e5a2000 r8:00000008 r7:9e57ee98 r6:9e5a2020 r5:9ebc4530 r4:9ebc4500 [<80041d2c>] (worker_thread) from [<80047e90>] (kthread+0xdc/0xf8) r10:00000000 r9:00000000 r8:00000000 r7:80041d2c r6:9e57ee80 r5:00000000 r4:9e584200 [<80047db4>] (kthread) from [<8000eb48>] (ret_from_fork+0x14/0x2c) r7:00000000 r6:00000000 r5:80047db4 r4:9e584200 ~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: cat /proc/cpuinfo. ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031738] usbcore: registered new interface driver usb-storage [ 1.042870] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.048078] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.053020] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065437] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071638] hub 1-0:1.0: USB hub found [ 1.075471] hub 1-0:1.0: 1 port detected [ 1.083142] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.088246] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.093171] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105451] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111609] hub 2-0:1.0: USB hub found [ 1.115438] hub 2-0:1.0: 1 port detected [ 1.120198] mousedev: PS/2 mouse device common for all mice [ 1.128448] i2c /dev entries driver [ 1.133152] usbcore: registered new interface driver uvcvideo [ 1.138932] USB Video Class driver (1.1.1) [ 1.143054] gspca_main: v2.14.0 registered [ 1.149747] sdhci: Secure Digital Host Controller Interface driver [ 1.155961] sdhci: Copyright(c) Pierre Ossman [ 1.161174] Synopsys Designware Multimedia Card Interface Driver [ 1.168135] usbcore: registered new interface driver usbhid [ 1.173737] usbhid: USB HID core driver [ 1.182470] TCP: cubic registered [ 1.185837] NET: Registered protocol family 17 [ 1.190308] can: controller area network core (rev 20120528 abi 9) [ 1.196568] NET: Registered protocol family 29 [ 1.201045] can: raw protocol (rev 20120528) [ 1.205328] can: broadcast manager protocol (rev 20120528 t) [ 1.211022] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216928] Key type dns_resolver registered [ 1.221381] ThumbEE CPU extension supported. [ 1.225700] Registering SWP/SWPB emulation handler [ 1.231670] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246802] ALSA device list: [ 1.249787] No soundcards found. [ 1.253891] Waiting for root device /dev/mmcblk0p2... [ 60.320561] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.058070] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.066262] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.075811] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.081965] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.090137] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.095595] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.103417] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.116980] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.123770] hub 2-0:1.0: USB hub found [ 2.127584] hub 2-0:1.0: 1 port detected [ 2.132354] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.136902] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.144462] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.152685] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.162328] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.168526] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.176963] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.184111] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.188724] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.188773] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.204958] +5V_HDMI_CON: disabling [ 2.204964] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.204995] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.225295] +USB0_VBUS_SW: disabling [ 2.228909] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.233687] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.233869] ALSA device list: [ 2.233873] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.251633] Waiting for root device /dev/mmcblk0p1... [ 2.442032] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.904793] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.915989] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.920589] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.928118] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.936315] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.945844] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.951998] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.058355] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.066575] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.076155] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.082353] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.090533] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.095997] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.103756] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.117072] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.123943] hub 2-0:1.0: USB hub found [ 2.127793] hub 2-0:1.0: 1 port detected [ 2.132706] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.137265] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.144842] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.153070] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.162767] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.168969] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.177177] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.184388] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.188864] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:23 UTC (949363223) [ 2.197593] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.205154] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.205221] +5V_HDMI_CON: disabling [ 2.205229] +USB0_VBUS_SW: disabling [ 2.205234] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.205634] ALSA device list: [ 2.205639] #0: NVIDIA Tegra Jetson TK1 [ 2.232000] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.233336] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.233419] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.254604] Waiting for root device /dev/mmcblk0p1... [ 2.442107] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.904609] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.915808] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.920371] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.927907] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.936106] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.945626] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.951781] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.077075] can: raw protocol (rev 20120528) [ 47.077081] can: broadcast manager protocol (rev 20120528 t) [ 47.077091] can: netlink gateway (rev 20130117) max_hops=1 [ 47.077382] Key type dns_resolver registered [ 47.077472] omap_vc_init_channel: No PMIC info for vdd_core [ 47.077474] omap_vp_init: No PMIC info for vdd_core [ 47.077478] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.077480] omap_vp_init: No PMIC info for vdd_mm [ 47.077482] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.077484] omap_vp_init: No PMIC info for vdd_mpu [ 47.077803] ThumbEE CPU extension supported. [ 47.077822] Registering SWP/SWPB emulation handler [ 47.082656] palmas 0-0048: Irq flag is 0x00000000 [ 47.154337] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.155184] mmc0: new high speed MMC card at address 0001 [ 47.155442] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.156768] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.161764] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.162356] mmcblk0: unknown partition table [ 47.163138] mmcblk0boot1: unknown partition table [ 47.163888] mmcblk0boot0: unknown partition table [ 47.199165] smps123: 600 <--> 1500 mV at 1060 mV [ 47.205298] smps45: 600 <--> 1310 mV at 1030 mV [ 47.211719] smps6: 1200 mV [ 47.215687] smps7: 1800 mV [ 47.219793] smps8: 600 <--> 1310 mV at 1040 mV [ 47.225538] smps9: failed to get the current voltage [ 47.230789] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.242834] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371947] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516956] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.523036] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530483] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537347] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.545070] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558541] ALSA device list: [ 47.561641] No soundcards found. [ 47.565643] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.523096] TCP: cubic registered [ 47.523104] NET: Registered protocol family 17 [ 47.523121] can: controller area network core (rev 20120528 abi 9) [ 47.523172] NET: Registered protocol family 29 [ 47.523178] can: raw protocol (rev 20120528) [ 47.523184] can: broadcast manager protocol (rev 20120528 t) [ 47.523194] can: netlink gateway (rev 20130117) max_hops=1 [ 47.523496] Key type dns_resolver registered [ 47.523573] omap_vc_init_channel: No PMIC info for vdd_core [ 47.523575] omap_vp_init: No PMIC info for vdd_core [ 47.523579] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.523580] omap_vp_init: No PMIC info for vdd_mm [ 47.523584] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.523586] omap_vp_init: No PMIC info for vdd_mpu [ 47.523895] ThumbEE CPU extension supported. [ 47.523910] Registering SWP/SWPB emulation handler [ 47.532493] palmas 0-0048: Irq flag is 0x00000000 [ 47.614817] mmcblk0: unknown partition table [ 47.620183] mmcblk0boot1: unknown partition table [ 47.625953] mmcblk0boot0: unknown partition table [ 47.630982] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.638595] smps123: 600 <--> 1500 mV at 1060 mV [ 47.644728] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651147] smps6: 1200 mV [ 47.655108] smps7: 1800 mV [ 47.659225] smps8: 600 <--> 1310 mV at 1040 mV [ 47.664972] smps9: failed to get the current voltage [ 47.670218] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.682274] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.806768] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.814678] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.820773] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.828218] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.835065] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.842777] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.856181] ALSA device list: [ 47.859289] No soundcards found. [ 47.863289] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.951477] Key type dns_resolver registered [ 1.951592] omap_vc_init_channel: No PMIC info for vdd_core [ 1.951597] omap_vp_init: No PMIC info for vdd_core [ 1.951606] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.951609] omap_vp_init: No PMIC info for vdd_mm [ 1.951618] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.951621] omap_vp_init: No PMIC info for vdd_mpu [ 1.952188] ThumbEE CPU extension supported. [ 1.952212] Registering SWP/SWPB emulation handler [ 1.952225] SmartReflex Class3 initialized [ 2.016281] palmas 0-0048: Irq flag is 0x00000000 [ 2.033979] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.034341] mmc0: new high speed MMC card at address 0001 [ 2.040031] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.040283] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.040483] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.043327] mmcblk0: unknown partition table [ 2.045332] mmcblk0boot1: unknown partition table [ 2.047190] mmcblk0boot0: unknown partition table [ 2.123677] smps123: 600 <--> 1500 mV at 1060 mV [ 2.130769] smps45: 600 <--> 1310 mV at 1030 mV [ 2.138165] smps6: 1200 mV [ 2.142963] smps7: 1800 mV [ 2.147846] smps8: 600 <--> 1310 mV at 1040 mV [ 2.154327] smps9: failed to get the current voltage [ 2.160270] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.174642] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.183477] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191333] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.197444] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.206569] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.215957] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.222935] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.231560] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.240240] sr_init: No PMIC hook to init smartreflex [ 2.245702] sr_init: platform driver register failed for SR [ 2.273975] pbias_mmc_omap5: disabling [ 2.279486] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.157205] hub 3-0:1.0: USB hub found [ 2.161003] hub 3-0:1.0: 1 port detected [ 2.165942] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.172885] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-17 04:35:41 UTC (1402979741) [ 2.185262] vdd_1v2: disabling [ 2.188502] vdd_1v5: disabling [ 2.192428] ALSA device list: [ 2.195388] #0: NVIDIA Tegra Seaboard [ 2.199839] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.207604] Please append a correct "root=" boot option; here are the available partitions: [ 2.215955] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.224205] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-00002-gebe0618 #1 [ 2.231784] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.239522] [<c0211c68>] (show_stack) from [<c0811c14>] (dump_stack+0x88/0x98) [ 2.246734] [<c0811c14>] (dump_stack) from [<c080ea64>] (panic+0xa0/0x218) [ 2.253603] [<c080ea64>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.261074] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.268978] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.276969] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.285825] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cd5c>] (kernel_init+0x8/0xf0) [ 2.293902] [<c080cd5c>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.301460] CPU1: stopping [ 2.304163] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-00002-gebe0618 #1 [ 2.311728] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.319462] [<c0211c68>] (show_stack) from [<c0811c14>] (dump_stack+0x88/0x98) [ 2.326673] [<c0811c14>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.334055] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.341609] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.349073] Exception stack(0xea087f30 to 0xea087f78) [ 2.354113] 7f20: 00000000 c0bc1fb4 c0bc1fb4 0000004c [ 2.362274] 7f40: 817a5cc0 00000000 89245278 00000000 eafb6db0 c0c9c7a8 00000000 ea46a424 [ 2.370433] 7f60: 00000015 ea087f78 c06b3004 c06b3010 60000113 ffffffff [ 2.377039] [<c02127c0>] (__irq_svc) from [<c06b3010>] (cpuidle_enter_state+0x68/0x100) [ 2.385033] [<c06b3010>] (cpuidle_enter_state) from [<c06b4b74>] (cpuidle_enter_state_coupled+0x130/0x378) [ 2.394676] [<c06b4b74>] (cpuidle_enter_state_coupled) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.404140] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.410913] drm_kms_helper: panic occurred, switching back to text console [ 2.417792] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 523264 [ 0.000000] free_area_init_node: node 0, pgdat c0c63440, node_mem_map ea7d4000 [ 0.000000] DMA zone: 1520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2568 pages used for memmap [ 0.000000] HighMem zone: 328704 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @ea79a000 s8448 r8192 d16128 u32768 [ 0.000000] pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521744 [ 0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998940K/2093056K available (6463K kernel code, 892K rwdata, 2580K rodata, 664K init, 307K bss, 94116K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0add270 (9045 kB) [ 0.000000] .init : 0xc0ade000 - 0xc0b84100 ( 665 kB) [ 0.000000] .data : 0xc0b86000 - 0xc0c65140 ( 893 kB) [ 0.000000] .bss : 0xc0c65148 - 0xc0cb2088 ( 308 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000007] Switching to timer-based delay loop [ 2889.540185] sched_clock: 64 bits at 24MHz, resolut~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000007] Switching to timer-based delay loop [ 2889.718916] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.719463] Console: colour dummy device 80x30 [ 2889.719474] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.719482] pid_max: default: 32768 minimum: 301 [ 2889.719542] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.719547] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.719817] CPU: Testing write buffer coherency: ok [ 2889.719930] CPU0: update cpu_capacity 1024 [ 2889.719936] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.720029] Setting up static identity map for 0x40817698 - 0x40817730 [ 2889.721128] CPU1: Booted secondary processor [ 2889.721162] CPU1: update cpu_capacity 1024 [ 2889.721165] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.721209] Brought up 2 CPUs [ 2889.721218] SMP: Total of 2 processors activated. [ 2889.721222] CPU: All CPU(s) started in HYP mode. [ 2889.721225] CPU: Virtualization extensions available. [ 2889.721468] devtmpfs: initialized [ 2889.723364] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.723557] pinctrl core: initialized pinctrl subsystem [ 2889.723760] regulator-dummy: no parameters [ 2889.729617] NET: Registered protocol family 16 [ 2889.730492] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.731218] cpuidle: using governor ladder [ 2889.731226] cpuidle: using governor menu [ 2889.736273] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.740105] No ATAGs? [ 2889.740124] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.740129] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.740223] EXYNOS5250 PMU Initialize [ 2889.741432] Serial: AMBA PL011 UART driver [ 2920.594301] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594313] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594609] vbat-supply: no parameters [ 2920.594749] P5.0V_USB3CON: 5000 mV [ 2920.595900] vgaarb: loaded [ 2920.596184] SCSI subsystem initialized [ 2920.596265] libata version 3.00 loaded.~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.617248] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.625183] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.637115] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.644409] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.655883] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.664398] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.676330] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.683654] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.695129] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.702941] HS USB OTG: no transceiver configured [ 3.707641] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.715515] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.723419] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.735351] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.742675] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.754150] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.762634] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.774566] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.781890] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.793365] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.801177] HS USB OTG: no transceiver configured [ 3.805877] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.813751] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.821655] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.833587] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.840911] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.852386] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.860900] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.872833] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.880126] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.891601] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.899414] HS USB OTG: no transceiver configured [ 3.904144] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.911987] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.919891] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.931823] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.939117] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.950592] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070093] ohci-platform: OHCI generic platform driver [ 1.075487] ohci-omap3: OHCI OMAP3 driver [ 1.079660] SPEAr-ohci: OHCI SPEAr driver [ 1.084475] usbcore: registered new interface driver usb-storage [ 1.095512] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100591] ci_hdrc ci_hdrc.0: no supported roles [ 1.105426] 2184200.usb supply vbus not found, using dummy regulator [ 1.115535] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120621] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125538] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.142778] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.148940] hub 1-0:1.0: USB hub found [ 1.152735] hub 1-0:1.0: 1 port detected [ 1.157500] mousedev: PS/2 mouse device common for all mice [ 1.165696] i2c /dev entries driver [ 1.170353] usbcore: registered new interface driver uvcvideo [ 1.176122] USB Video Class driver (1.1.1) [ 1.180242] gspca_main: v2.14.0 registered [ 1.186924] sdhci: Secure Digital Host Controller Interface driver [ 1.193129] sdhci: Copyright(c) Pierre Ossman [ 1.198332] Synopsys Designware Multimedia Card Interface Driver [ 1.205268] usbcore: registered new interface driver usbhid [ 1.210863] usbhid: USB HID core driver [ 1.219194] TCP: cubic registered [ 1.222531] NET: Registered protocol family 17 [ 1.227017] can: controller area network core (rev 20120528 abi 9) [ 1.233281] NET: Registered protocol family 29 [ 1.237754] can: raw protocol (rev 20120528) [ 1.242039] can: broadcast manager protocol (rev 20120528 t) [ 1.247725] can: netlink gateway (rev 20130117) max_hops=1 [ 1.253613] Key type dns_resolver registered [ 1.258377] ThumbEE CPU extension supported. [ 1.262675] Registering SWP/SWPB emulation handler [ 1.268699] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.283930] ALSA device list: [ 1.286914] No soundcards found. [ 1.290905] Waiting for root device /dev/mmcblk0p2... [ 60.323296] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 269 warnings 0 failures (mainline/v3.16-rc1-2-gebe0618)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: ebe0618 epoll: fix use-after-free in eventpoll_release_file Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.16-rc1-2-gebe0618/ Runtime: 45m 55s Passed: 126 Failed: 0 Warnings: 269 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2575:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2547:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2549:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

arm-soc boot: 64 boots: 61 pass, 3 fail (v3.15-8902-gf259271)

by Kevin's boot bot

Tree/Branch: arm-soc Git describe: v3.15-8902-gf259271 Failed boot tests (console logs at the end) =========================================== qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.2 sec: PASS da850-evm 0 min 14.6 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 56.4 sec: PASS tegra30-beaver 0 min 17.5 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 45.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.6 sec: PASS omap5-uevm 1 min 37.9 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.2 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.7 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.4 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS omap3-beagle-xm 0 min 44.8 sec: PASS legacy,3530beagle 0 min 35.2 sec: PASS (Warnings: 1) omap4-panda 0 min 51.6 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.2 sec: PASS am335x-bone 0 min 29.0 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap5-uevm 0 min 50.5 sec: PASS (Warnings: 1) omap3-n900 0 min 17.8 sec: PASS legacy,n900 0 min 16.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 53.2 sec: PASS (Warnings: 1) legacy,3730storm 0 min 19.9 sec: PASS legacy,3530overo 0 min 21.6 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 18.4 sec: PASS am335x-boneblack 0 min 22.6 sec: PASS sun7i-a20-cubieboard2 0 min 13.2 sec: PASS sun4i-a10-cubieboard 0 min 17.1 sec: PASS exynos5410-smdk5410 0 min 28.6 sec: PASS am335x-bone 0 min 24.2 sec: PASS tegra124-jetson-tk1 0 min 17.8 sec: PASS armada-370-mirabox 0 min 22.1 sec: PASS omap4-panda 0 min 53.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.3 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS ste-snowball 1 min 15.0 sec: PASS tegra30-beaver 0 min 20.4 sec: PASS omap3-n900 0 min 15.4 sec: PASS qcom-apq8074-dragonboard 0 min 18.8 sec: PASS bcm28155-ap 0 min 25.5 sec: PASS omap3-overo-tobi 0 min 23.7 sec: PASS omap3-overo-storm-tobi 0 min 21.4 sec: PASS omap3-beagle-xm 0 min 49.7 sec: PASS exynos5420-arndale-octa 0 min 43.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.7 sec: PASS omap5-uevm 1 min 42.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 53.3 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 30.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.8 sec: PASS sun4i-a10-cubieboard 0 min 11.6 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.7 sec: FAIL arm-bcm_defconfig ----------------- bcm28155-ap 0 min 27.8 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.5 sec: FAIL exynos5250-arndale 0 min 30.4 sec: PASS exynos5410-smdk5410 0 min 29.6 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 30.9 sec: PASS armada-370-mirabox 0 min 23.5 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 41.7 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard: FAIL: last 40 lines of boot log: ---------------------------------------------------------- [ 1.513660] bfa0: 60000113 ffffffff [ 1.521824] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.525128] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.532766] [<c025866c>] (cpu_startup_entry) from [<c091caa8>] (start_kernel+0x2e8/0x344) [ 1.540838] [<c091caa8>] (start_kernel) from [<00208074>] (0x208074) [ 1.549079] CPU2: stopping [ 1.555501] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.15.0-08902-gf259271 #1 [ 1.558041] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.566284] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.574178] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.581204] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.588759] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.596128] Exception stack(0xee097f98 to 0xee097fe0) [ 1.603678] 7f80: 00000002 c0851780 [ 1.608721] 7fa0: 00000050 00000000 ee096000 ee096000 ee096000 c09b31fc c097246c 512f06f0 [ 1.616880] 7fc0: c06d88ec c09b31fc 00000020 ee097fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.625047] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.633205] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.640667] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.648734] CPU3: stopping [ 1.655590] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-08902-gf259271 #1 [ 1.658216] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.666458] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.674352] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.681379] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.688932] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.696301] Exception stack(0xee099f98 to 0xee099fe0) [ 1.703852] 9f80: 00000003 c0851780 [ 1.708894] 9fa0: 00000048 00000000 ee098000 ee098000 ee098000 c09b31fc c097246c 512f06f0 [ 1.717054] 9fc0: c06d88ec c09b31fc 00000020 ee099fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.725220] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.733379] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.740842] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.748911] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.748911] ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 # PYBOOT: Time: 17.70 seconds. # PYBOOT: Result: FAIL arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 16.241665] mmcblk0: p1 p2 p3 p4 [ 16.244837] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00bc088 [ 16.252375] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.257311] Modules linked in: [ 16.260348] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-08902-gf259271 #1 [ 16.268934] Workqueue: kmmcd mmc_rescan [ 16.272737] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.278116] PC is at rescan_partitions+0xb4/0x290 [ 16.282789] LR is at 0xf00bc000 [ 16.285909] pc : [<c01afcd8>] lr : [<f00bc000>] psr: 20000113 [ 16.285909] sp : ef0b5c80 ip : 00000000 fp : 00000000 [ 16.297346] r10: 00000000 r9 : ed710140 r8 : ed5bf200 [ 16.302545] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.309044] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.315544] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.322823] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.328542] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.334867] Stack: (0xef0b5c80 to 0xef0b6000) [ 16.339203] 5c80: c054c214 00000001 ef0b4000 c0387150 00000001 c05284f8 ed5e7598 c05283c8 [ 16.347348] 5ca0: eec24380 ed5e7468 eec24330 eec24280 00000000 ed5e7468 00000000 00000000 [ 16.355493] 5cc0: 00000000 eec24280 ed5bf200 eec24290 00000001 00000000 00000000 c00e305c [ 16.363639] 5ce0: c00e19fc 00000000 00000000 00000001 eec24280 00000000 ed5bf270 ed5bf20c [ 16.371784] 5d00: 00000000 ed5e7380 00000003 c00e32c0 c052a6cc 00000001 00000003 c0388418 [ 16.379930] 5d20: c052a6cc c00e1fcc ef0b5d34 c02222ec ed5bf240 00000001 eec24280 ed5bf200 [ 16.388075] 5d40: ed5bf270 ed5bf20c 00000000 ed5e7380 00000003 c01adbf0 c01aca44 ed5bf200 [ 16.396221] 5d60: 00000080 0b300000 00000002 ed528c00 ed529400 ed52ec00 ed52ec00 ed52eebc [ 16.404366] 5d80: c02baca8 ed529400 ed52ec00 ed529588 ef0b5dd6 c02bbbac 00000056 ed52946c [ 16.412512] 5da0: 00000003 ed528c00 ed529400 c02bc7dc 00000003 ef0b5dd6 00000008 ed416708 [ 16.420657] 5dc0: c0469eec ed52ee98 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 16.428802] 5de0: 00000001 ed529408 c058de1c 00000000 c054c19c 00000001 00000000 c054be48 [ 16.436948] 5e00: ef013c00 c02b112c c02b1114 c0225d90 00000000 ed529408 c0225f40 ed529808 [ 16.445094] 5e20: 00000000 c022456c ef365698 ef2876c4 ed529408 ed52943c c054bd68 c0225c6c [ 16.453239] 5e40: ed529408 ed529408 c054bd68 c02253dc ed529408 00000000 ed529410 c0223a44 [ 16.461385] 5e60: ef013c00 c0381094 c047d090 ef0b5e84 00061a80 ed529400 ed529408 c047d03c [ 16.469530] 5e80: 00061a80 c03b10ac 00000000 c02b154c c047d03c c0451f2c c047cff8 00000001 [ 16.477675] 5ea0: ed529800 00000000 ed529800 c02b3f98 00061a80 40ff8080 00000000 ed5299ec [ 16.485821] ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.50 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.499389] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.507263] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.515289] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.527221] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.534545] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.546020] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.554718] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.566650] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.573974] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.585449] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.593261] HS USB OTG: no transceiver configured [ 3.597961] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.605834] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.613861] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.625793] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.633117] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.644592] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.653259] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.665191] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.672515] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.683990] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.691833] HS USB OTG: no transceiver configured [ 3.696533] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.704376] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.712432] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.724334] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.731658] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.743164] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.751831] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.763763] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.771087] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.782562] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.790374] HS USB OTG: no transceiver configured [ 3.795074] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.802947] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.810974] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.45 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

next boot: 37 passed 3 failed (next/next-20140617)

by Olof's autobooter

Failed boards: capri bcm_defconfig : FAILED 1:24.30 capri multi_v7_defconfig : FAILED 1:24.81 snowball u8500_defconfig : FAILED 1:42.00 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:19.89 arndale exynos_defconfig : passed 1:15.63 arndale multi_v7_defconfig : passed 1:28.42 arndale multi_lpae_defconfig : passed 1:24.04 bbb omap2plus_defconfig : passed 1:32.77 bbb multi_v7_defconfig : passed 1:18.39 beaver multi_v7_defconfig : passed 0:58.79 cubie sunxi_defconfig : passed 1:19.70 cubie multi_v7_defconfig : passed 1:27.83 cubie2 sunxi_defconfig : warnings 1:23.86 cubie2 multi_v7_defconfig : warnings 1:36.98 cubie2 multi_lpae_defconfig : warnings 1:04.24 cubox multi_v7_defconfig : passed 1:12.16 dalmore tegra_defconfig : passed 1:33.05 dalmore multi_v7_defconfig : passed 1:19.23 dalmore multi_lpae_defconfig : passed 1:23.18 hummingboard imx_v6_v7_defconfig : warnings 1:25.42 hummingboard multi_v7_defconfig : warnings 1:17.56 jetson tegra_defconfig : passed 1:08.80 jetson multi_v7_defconfig : passed 0:56.15 jetson multi_lpae_defconfig : passed 1:04.57 omap5uevm omap2plus_defconfig : warnings 1:05.30 omap5uevm multi_v7_defconfig : warnings 2:03.13 omap5uevm multi_lpae_defconfig : warnings 1:52.73 panda omap2plus_defconfig : warnings 1:41.62 panda multi_v7_defconfig : warnings 1:41.49 sama5 sama5_defconfig : warnings 1:56.96 seaboard tegra_defconfig : passed 1:07.49 seaboard multi_v7_defconfig : passed 1:13.49 snow exynos_defconfig : passed 0:55.64 snow multi_v7_defconfig : passed 0:56.27 snow multi_lpae_defconfig : passed 1:00.35 snowball multi_v7_defconfig : passed 3:23.10 trimslice tegra_defconfig : passed 1:01.33 trimslice multi_v7_defconfig : passed 1:01.14 wandboard imx_v6_v7_defconfig : passed 1:03.57 wandboard multi_v7_defconfig : passed 1:00.86 Offline boards: beaver tegra_defconfig : OFFLINE 0:41.55 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 2500 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.650000] sdhci-kona 3f190000.sdio: Failed sdhci_add_host [ 0.665000] sdhci-kona 3f190000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.670000] platform 3f190000.sdio: Driver sdhci-kona requests probe deferral [ 0.675000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.700000] sdhci-kona 3f1b0000.sdio: Failed sdhci_add_host [ 0.715000] sdhci-kona 3f1b0000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.720000] platform 3f1b0000.sdio: Driver sdhci-kona requests probe deferral [ 0.725000] usbcore: registered new interface driver usbhid [ 0.730000] usbhid: USB HID core driver [ 0.735000] TCP: cubic registered [ 0.735000] NET: Registered protocol family 17 [ 0.740000] can: controller area network core (rev 20120528 abi 9) [ 0.745000] NET: Registered protocol family 29 [ 0.745000] can: raw protocol (rev 20120528) [ 0.750000] can: broadcast manager protocol (rev 20120528 t) [ 0.755000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.760000] Key type dns_resolver registered [ 0.760000] ThumbEE CPU extension supported. [ 0.765000] Registering SWP/SWPB emulation handler [ 0.790000] sdhci-kona 3f190000.sdio: Failed sdhci_add_host [ 0.805000] sdhci-kona 3f190000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.810000] platform 3f190000.sdio: Driver sdhci-kona requests probe deferral [ 0.815000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.840000] sdhci-kona 3f1b0000.sdio: Failed sdhci_add_host [ 0.855000] sdhci-kona 3f1b0000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.860000] platform 3f1b0000.sdio: Driver sdhci-kona requests probe deferral [ 0.865000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.870000] ALSA device list: [ 0.870000] No soundcards found. [ 0.875000] Waiting for root device /dev/mmcblk0p8... [ 41.280000] random: nonblocking pool is initialized ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.548889] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.560821] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.568115] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.579589] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.588195] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.600128] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.607452] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.618927] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.626739] HS USB OTG: no transceiver configured [ 3.631469] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.639312] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.647216] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.659149] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.666473] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.677947] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.686553] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.698486] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.705810] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.717285] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.725097] HS USB OTG: no transceiver configured [ 3.729797] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.737670] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.745605] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.757537] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.764862] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.776336] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.784912] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.796844] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.804138] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.815643] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.823455] HS USB OTG: no transceiver configured [ 3.828155] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.835998] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.843933] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.855865] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.863189] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.874664] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.883270] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

next build: 539 warnings 0 failures (next/next-20140617)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 5f295cd Add linux-next specific files for 20140617 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140617/ Runtime: 42m 24s Passed: 126 Failed: 0 Warnings: 539 Section mismatches: 16 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 include/linux/of.h:772:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 2 buildall.arm.omap1_defconfig.log.passed:warning: (ARCH_OMAP1) selects ARCH_OMAP which has unmet direct dependencies (ARCH_MULTI_V6 || ARCH_MULTI_V7) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 22 include/linux/ftrace.h:623:60: warning: unsupported argument to '__builtin_return_address' [enabled by default] 86 mm/madvise.c:145:9: warning: unused variable 'orig_pte' [-Wunused-variable] 92 arch/arm/include/asm/pgtable.h:206:50: warning: value computed is not used [-Wunused-value] 97 fs/nfs/pagelist.c:555:16: warning: unused variable 'inode' [-Wunused-variable] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4ae8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x3640): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25828): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3df00): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x75c0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x86040): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3de7c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x757c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85abc): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x727c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x36c8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d97c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 24 passed 16 failed (mainline/v3.16-rc1-1-g68986c9)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:37.16 capri bcm_defconfig : FAILED 1:24.40 capri multi_v7_defconfig : FAILED 1:24.49 cubox multi_v7_defconfig : FAILED 1:34.47 dalmore multi_v7_defconfig : FAILED 1:34.35 dalmore multi_lpae_defconfig : FAILED 1:30.76 hummingboard multi_v7_defconfig : FAILED 1:27.28 jetson multi_lpae_defconfig : FAILED 1:28.87 omap5uevm omap2plus_defconfig : FAILED 1:45.98 omap5uevm multi_v7_defconfig : FAILED 1:51.34 omap5uevm multi_lpae_defconfig : FAILED 1:44.66 seaboard multi_v7_defconfig : FAILED 0:34.97 snow multi_v7_defconfig : FAILED 1:15.83 snow multi_lpae_defconfig : FAILED 1:13.67 snowball u8500_defconfig : FAILED 1:49.69 wandboard multi_v7_defconfig : FAILED 1:44.16 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.20 arndale exynos_defconfig : passed 1:35.43 arndale multi_v7_defconfig : passed 1:29.18 arndale multi_lpae_defconfig : passed 1:23.22 bbb omap2plus_defconfig : passed 1:31.54 bbb multi_v7_defconfig : passed 1:19.91 beaver tegra_defconfig : passed 1:14.96 cubie sunxi_defconfig : warnings 1:27.09 cubie multi_v7_defconfig : passed 1:28.95 cubie2 sunxi_defconfig : passed 1:26.25 cubie2 multi_v7_defconfig : passed 1:32.50 cubie2 multi_lpae_defconfig : passed 1:08.69 dalmore tegra_defconfig : passed 1:24.50 hummingboard imx_v6_v7_defconfig : passed 1:19.28 jetson tegra_defconfig : passed 1:02.72 panda omap2plus_defconfig : warnings 1:30.28 panda multi_v7_defconfig : warnings 1:43.22 sama5 sama5_defconfig : warnings 1:59.04 seaboard tegra_defconfig : passed 1:08.05 snow exynos_defconfig : passed 1:28.99 snowball multi_v7_defconfig : passed 5:08.30 trimslice tegra_defconfig : passed 1:01.40 trimslice multi_v7_defconfig : passed 1:11.53 wandboard imx_v6_v7_defconfig : passed 1:10.20 Offline boards: jetson multi_v7_defconfig : OFFLINE 1:40.46 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.573885] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.579971] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.584931] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.591016] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.598760] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.605868] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.611460] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.617837] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.627833] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.637512] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.644143] [drm] No driver support for vblank timestamp query. [ 3.650091] host1x drm: No connectors reported connected with modes [ 3.656356] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.680149] Console: switching to colour frame buffer device 128x48 [ 3.692142] host1x drm: fb0: frame buffer device [ 3.696844] host1x drm: registered panic notifier [ 3.713609] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.719878] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.727328] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.738815] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.744221] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.752016] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.763218] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.769584] hub 1-0:1.0: USB hub found [ 3.773367] hub 1-0:1.0: 1 port detected [ 3.777747] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.783160] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.790904] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.803608] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.809906] hub 2-0:1.0: USB hub found [ 3.813678] hub 2-0:1.0: 1 port detected [ 3.821580] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.834368] usb1_vbus: disabling [ 3.837776] ALSA device list: [ 3.840759] #0: NVIDIA Tegra Beaver [ 3.844996] Waiting for root device /dev/mmcblk0p1... [ 4.123626] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.592409] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1800 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.225952] hub 2-0:1.0: 1 port detected [ 1.230326] SPEAr-ehci: EHCI SPEAr driver [ 1.234438] tegra-ehci: Tegra EHCI driver [ 1.238566] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244750] ohci-pci: OHCI PCI platform driver [ 1.249255] ohci-platform: OHCI generic platform driver [ 1.254570] ohci-omap3: OHCI OMAP3 driver [ 1.258677] SPEAr-ohci: OHCI SPEAr driver [ 1.263415] usbcore: registered new interface driver usb-storage [ 1.270959] mousedev: PS/2 mouse device common for all mice [ 1.277979] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287299] i2c /dev entries driver [ 1.293336] usbcore: registered new interface driver uvcvideo [ 1.299092] USB Video Class driver (1.1.1) [ 1.303193] gspca_main: v2.14.0 registered [ 1.310474] orion_wdt: Initial timeout 25 sec [ 1.315935] sdhci: Secure Digital Host Controller Interface driver [ 1.322100] sdhci: Copyright(c) Pierre Ossman [ 1.327009] Synopsys Designware Multimedia Card Interface Driver [ 1.333697] usbcore: registered new interface driver usbhid [ 1.339258] usbhid: USB HID core driver [ 1.347518] TCP: cubic registered [ 1.350865] NET: Registered protocol family 17 [ 1.355321] can: controller area network core (rev 20120528 abi 9) [ 1.361564] NET: Registered protocol family 29 [ 1.366004] can: raw protocol (rev 20120528) [ 1.370269] can: broadcast manager protocol (rev 20120528 t) [ 1.375924] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381798] Key type dns_resolver registered [ 1.386273] ThumbEE CPU extension supported. [ 1.390556] Registering SWP/SWPB emulation handler [ 1.395345] PJ4 iWMMXt v2 coprocessor enabled. [ 1.400069] ata1: SATA link down (SStatus 0 SControl F300) [ 1.406530] USB Power: 5000 mV [ 1.410100] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-17 01:54:20 UTC (1402970060) [ 1.420620] ALSA device list: [ 1.423578] No soundcards found. [ 1.427509] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.959429] i2c 0-004c: Driver lm90 requests probe deferral [ 2.967124] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.972798] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.983236] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.989797] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.000407] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.006059] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.016698] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.031662] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.041370] hub 1-0:1.0: USB hub found [ 3.045483] hub 1-0:1.0: 1 port detected [ 3.051710] i2c 0-004c: Driver lm90 requests probe deferral [ 3.059156] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.064759] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.074553] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.080934] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.092597] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.100773] i2c 0-004c: Driver lm90 requests probe deferral [ 3.108535] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.114044] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.150749] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.150848] VDD_5V0_HDMI_CON: disabling [ 3.150865] vdd_cam_1v8_reg: disabling [ 3.158111] vdd_hdmi_5v0: disabling [ 3.158128] usb1_vbus: disabling [ 3.158145] dvdd_ts: disabling [ 3.177638] ALSA device list: [ 3.179139] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.179394] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.194065] #0: NVIDIA Tegra Dalmore [ 3.200203] Waiting for root device /dev/mmcblk0p1... [ 3.356985] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.841587] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.853180] i2c 0-004c: Driver lm90 requests probe deferral [ 3.860774] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.866457] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.876387] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.882869] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.965710] i2c 0-004c: Driver lm90 requests probe deferral [ 2.973230] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.978846] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.988818] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.995289] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.005653] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.011274] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.021339] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.037171] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.046503] hub 1-0:1.0: USB hub found [ 3.050541] hub 1-0:1.0: 1 port detected [ 3.056570] i2c 0-004c: Driver lm90 requests probe deferral [ 3.063878] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.069428] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.079398] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.085830] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.097549] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.105725] i2c 0-004c: Driver lm90 requests probe deferral [ 3.113386] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.113568] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.113649] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.116626] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.116994] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.186485] VDD_5V0_HDMI_CON: disabling [ 3.190455] vdd_cam_1v8_reg: disabling [ 3.194676] vdd_hdmi_5v0: disabling [ 3.198385] usb1_vbus: disabling [ 3.201652] dvdd_ts: disabling [ 3.207134] ALSA device list: [ 3.210140] #0: NVIDIA Tegra Dalmore [ 3.216406] Waiting for root device /dev/mmcblk0p1... [ 3.402265] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.886802] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.898400] i2c 0-004c: Driver lm90 requests probe deferral [ 3.905917] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.911552] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.921348] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.927748] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031605] usbcore: registered new interface driver usb-storage [ 1.042756] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047972] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052916] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065293] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071497] hub 1-0:1.0: USB hub found [ 1.075329] hub 1-0:1.0: 1 port detected [ 1.083009] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.088114] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.093041] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105304] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111456] hub 2-0:1.0: USB hub found [ 1.115256] hub 2-0:1.0: 1 port detected [ 1.120042] mousedev: PS/2 mouse device common for all mice [ 1.128311] i2c /dev entries driver [ 1.133020] usbcore: registered new interface driver uvcvideo [ 1.138798] USB Video Class driver (1.1.1) [ 1.142922] gspca_main: v2.14.0 registered [ 1.149631] sdhci: Secure Digital Host Controller Interface driver [ 1.155845] sdhci: Copyright(c) Pierre Ossman [ 1.161050] Synopsys Designware Multimedia Card Interface Driver [ 1.168007] usbcore: registered new interface driver usbhid [ 1.173611] usbhid: USB HID core driver [ 1.182329] TCP: cubic registered [ 1.185696] NET: Registered protocol family 17 [ 1.190168] can: controller area network core (rev 20120528 abi 9) [ 1.196430] NET: Registered protocol family 29 [ 1.200906] can: raw protocol (rev 20120528) [ 1.205190] can: broadcast manager protocol (rev 20120528 t) [ 1.210884] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216764] Key type dns_resolver registered [ 1.221215] ThumbEE CPU extension supported. [ 1.225532] Registering SWP/SWPB emulation handler [ 1.231505] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246587] ALSA device list: [ 1.249571] No soundcards found. [ 1.253687] Waiting for root device /dev/mmcblk0p2... [ 60.325418] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.063138] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.071360] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.080960] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.087155] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.095319] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.100780] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.108542] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.121885] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.128756] hub 2-0:1.0: USB hub found [ 2.132605] hub 2-0:1.0: 1 port detected [ 2.137522] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.142080] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.149652] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.157878] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.167566] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.173766] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.181966] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.189111] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.193728] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.193780] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:21 UTC (949363221) [ 2.209964] +5V_HDMI_CON: disabling [ 2.209969] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.210001] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.230302] +USB0_VBUS_SW: disabling [ 2.233906] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.238694] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.238876] ALSA device list: [ 2.238880] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.256638] Waiting for root device /dev/mmcblk0p1... [ 2.446923] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.909660] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.920760] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.925314] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.932819] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.941012] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.950500] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.956653] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071973] can: raw protocol (rev 20120528) [ 47.071979] can: broadcast manager protocol (rev 20120528 t) [ 47.071988] can: netlink gateway (rev 20130117) max_hops=1 [ 47.072283] Key type dns_resolver registered [ 47.072364] omap_vc_init_channel: No PMIC info for vdd_core [ 47.072367] omap_vp_init: No PMIC info for vdd_core [ 47.072370] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072372] omap_vp_init: No PMIC info for vdd_mm [ 47.072376] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072378] omap_vp_init: No PMIC info for vdd_mpu [ 47.072692] ThumbEE CPU extension supported. [ 47.072707] Registering SWP/SWPB emulation handler [ 47.077574] palmas 0-0048: Irq flag is 0x00000000 [ 47.149231] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.150069] mmc0: new high speed MMC card at address 0001 [ 47.150331] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.151685] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.156681] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.157262] mmcblk0: unknown partition table [ 47.158044] mmcblk0boot1: unknown partition table [ 47.158784] mmcblk0boot0: unknown partition table [ 47.194036] smps123: 600 <--> 1500 mV at 1060 mV [ 47.200169] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206561] smps6: 1200 mV [ 47.210529] smps7: 1800 mV [ 47.214634] smps8: 600 <--> 1310 mV at 1040 mV [ 47.220381] smps9: failed to get the current voltage [ 47.225633] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.237681] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.366865] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.511875] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.517956] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.525410] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.532275] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.539999] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.553494] ALSA device list: [ 47.556593] No soundcards found. [ 47.560605] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.523067] TCP: cubic registered [ 47.523075] NET: Registered protocol family 17 [ 47.523090] can: controller area network core (rev 20120528 abi 9) [ 47.523139] NET: Registered protocol family 29 [ 47.523146] can: raw protocol (rev 20120528) [ 47.523152] can: broadcast manager protocol (rev 20120528 t) [ 47.523162] can: netlink gateway (rev 20130117) max_hops=1 [ 47.523446] Key type dns_resolver registered [ 47.523526] omap_vc_init_channel: No PMIC info for vdd_core [ 47.523528] omap_vp_init: No PMIC info for vdd_core [ 47.523531] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.523533] omap_vp_init: No PMIC info for vdd_mm [ 47.523536] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.523538] omap_vp_init: No PMIC info for vdd_mpu [ 47.523853] ThumbEE CPU extension supported. [ 47.523869] Registering SWP/SWPB emulation handler [ 47.532511] palmas 0-0048: Irq flag is 0x00000000 [ 47.614792] mmcblk0: unknown partition table [ 47.620142] mmcblk0boot1: unknown partition table [ 47.625926] mmcblk0boot0: unknown partition table [ 47.631088] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.638671] smps123: 600 <--> 1500 mV at 1060 mV [ 47.644811] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651240] smps6: 1200 mV [ 47.655229] smps7: 1800 mV [ 47.659347] smps8: 600 <--> 1310 mV at 1040 mV [ 47.665081] smps9: failed to get the current voltage [ 47.670322] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.682369] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.806785] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.814704] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.820796] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.828234] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.835089] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.842801] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.856223] ALSA device list: [ 47.859329] No soundcards found. [ 47.863338] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.951478] Key type dns_resolver registered [ 1.951579] omap_vc_init_channel: No PMIC info for vdd_core [ 1.951583] omap_vp_init: No PMIC info for vdd_core [ 1.951593] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.951597] omap_vp_init: No PMIC info for vdd_mm [ 1.951606] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.951609] omap_vp_init: No PMIC info for vdd_mpu [ 1.952170] ThumbEE CPU extension supported. [ 1.952195] Registering SWP/SWPB emulation handler [ 1.952208] SmartReflex Class3 initialized [ 2.016305] palmas 0-0048: Irq flag is 0x00000000 [ 2.033864] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.034076] mmc0: new high speed MMC card at address 0001 [ 2.039983] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.040218] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.040439] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.043293] mmcblk0: unknown partition table [ 2.045264] mmcblk0boot1: unknown partition table [ 2.047144] mmcblk0boot0: unknown partition table [ 2.123677] smps123: 600 <--> 1500 mV at 1060 mV [ 2.130829] smps45: 600 <--> 1310 mV at 1030 mV [ 2.138232] smps6: 1200 mV [ 2.142840] smps7: 1800 mV [ 2.147793] smps8: 600 <--> 1310 mV at 1040 mV [ 2.154251] smps9: failed to get the current voltage [ 2.160195] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.174574] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.183408] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191329] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.197445] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.206590] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.215987] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.222967] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.231566] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.240255] sr_init: No PMIC hook to init smartreflex [ 2.245718] sr_init: platform driver register failed for SR [ 2.274028] pbias_mmc_omap5: disabling [ 2.279540] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.120634] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.127260] hub 3-0:1.0: USB hub found [ 2.131063] hub 3-0:1.0: 1 port detected [ 2.136100] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.143060] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-17 01:55:21 UTC (1402970121) [ 2.155659] vdd_1v2: disabling [ 2.158879] vdd_1v5: disabling [ 2.162821] ALSA device list: [ 2.165805] #0: NVIDIA Tegra Seaboard [ 2.170264] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.178016] Please append a correct "root=" boot option; here are the available partitions: [ 2.186375] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.194625] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-00001-g68986c9 #1 [ 2.202206] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.209946] [<c0211c68>] (show_stack) from [<c0811bf4>] (dump_stack+0x88/0x98) [ 2.217158] [<c0811bf4>] (dump_stack) from [<c080ea44>] (panic+0xa0/0x218) [ 2.224028] [<c080ea44>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.231501] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.239405] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.247398] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.256256] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cd3c>] (kernel_init+0x8/0xf0) [ 2.264334] [<c080cd3c>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.271890] CPU1: stopping [ 2.274593] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-00001-g68986c9 #1 [ 2.282160] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.289896] [<c0211c68>] (show_stack) from [<c0811bf4>] (dump_stack+0x88/0x98) [ 2.297108] [<c0811bf4>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.304491] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.312046] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.319511] Exception stack(0xea087f68 to 0xea087fb0) [ 2.324552] 7f60: 00000000 c0bc1fb4 c0bc1fb4 0000004c 874d96a8 00000000 [ 2.332714] 7f80: 87612678 00000000 eafb6db0 ea086000 00000000 c081f058 00000015 ea087fb0 [ 2.340873] 7fa0: c06b2fe4 c06b2ff0 60000113 ffffffff [ 2.345921] [<c02127c0>] (__irq_svc) from [<c06b2ff0>] (cpuidle_enter_state+0x68/0x100) [ 2.353920] [<c06b2ff0>] (cpuidle_enter_state) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.362692] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.369464] drm_kms_helper: panic occurred, switching back to text console [ 2.376344] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521744 [ 0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998940K/2093056K available (6463K kernel code, 892K rwdata, 2580K rodata, 664K init, 307K bss, 94116K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0add270 (9045 kB) [ 0.000000] .init : 0xc0ade000 - 0xc0b84100 ( 665 kB) [ 0.000000] .data : 0xc0b86000 - 0xc0c65140 ( 893 kB) [ 0.000000] .bss : 0xc0c65148 - 0xc0cb2088 ( 308 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000007] Switching to timer-based delay loop [ 2889.586896] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.587433] Console: colour dummy device 80x30 [ 2889.587444] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.587452] pid_max: default: 32768 minimum: 301 [ 2889.587512] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.587517] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.587788] CPU: Testing write buffer coherency: ok [ 2889.587900] CPU0: update cpu_capacity 1024 [ 2889.587906] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.587997] Setting up sta~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.762175] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.762269] Setting up static identity map for 0x40817678 - 0x40817710 [ 2889.763370] CPU1: Booted secondary processor [ 2889.763404] CPU1: update cpu_capacity 1024 [ 2889.763407] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.763453] Brought up 2 CPUs [ 2889.763462] SMP: Total of 2 processors activated. [ 2889.763466] CPU: All CPU(s) started in HYP mode. [ 2889.763469] CPU: Virtualization extensions available. [ 2889.763711] devtmpfs: initialized [ 2889.765614] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.765804] pinctrl core: initialized pinctrl subsystem [ 2889.766010] regulator-dummy: no parameters [ 2889.771868] NET: Registered protocol family 16 [ 2889.772741] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.773461] cpuidle: using governor ladder [ 2889.773469] cpuidle: using governor menu [ 2889.778513] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.782365] No ATAGs? [ 2889.782384] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.782390] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.782486] EXYNOS5250 PMU Initialize [ 2889.783682] Serial: AMBA PL011 UART driver [ 2920.594298] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594310] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594602] vbat-supply: no parameters [ 2920.594740] P5.0V_USB3CON: 5000 mV [ 2920.595891] vgaarb: loaded [ 2920.596172] SCSI subsystem initialized [ 2920.596253] libata version 3.00 loaded. [ 2920.596400] usbcore: registered new interface driver usbfs [ 2920.596429] usbcore: registered new interface driver hub [ 2920.596481] usbcore: registered new device driver usb [ 2920.596895] Linux video capture interface: v2.00 [ 2920.596916] pps_core: LinuxPPS API ver. 1 registered [ 2920.596920] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596934] PTP clock support registered [ 2920.596969] EDAC MC: Ver: 3.0.0 [ 2920.597317] Advanc~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.536712] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.548645] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.555938] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.567443] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.575927] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.587860] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.595184] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.606658] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.614471] HS USB OTG: no transceiver configured [ 3.619171] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.627014] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.634948] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.646850] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654174] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665649] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674194] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686096] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693420] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.704895] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712707] HS USB OTG: no transceiver configured [ 3.717407] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725280] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733184] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745117] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752441] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.763916] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772430] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784362] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791687] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803161] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.810974] HS USB OTG: no transceiver configured [ 3.815673] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823516] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831451] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843353] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850677] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862152] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870635] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070127] ohci-platform: OHCI generic platform driver [ 1.075510] ohci-omap3: OHCI OMAP3 driver [ 1.079677] SPEAr-ohci: OHCI SPEAr driver [ 1.084516] usbcore: registered new interface driver usb-storage [ 1.095542] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100621] ci_hdrc ci_hdrc.0: no supported roles [ 1.105454] 2184200.usb supply vbus not found, using dummy regulator [ 1.115554] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120640] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125556] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.142783] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.148989] hub 1-0:1.0: USB hub found [ 1.152812] hub 1-0:1.0: 1 port detected [ 1.157507] mousedev: PS/2 mouse device common for all mice [ 1.165634] i2c /dev entries driver [ 1.170296] usbcore: registered new interface driver uvcvideo [ 1.176072] USB Video Class driver (1.1.1) [ 1.180192] gspca_main: v2.14.0 registered [ 1.186900] sdhci: Secure Digital Host Controller Interface driver [ 1.193106] sdhci: Copyright(c) Pierre Ossman [ 1.198316] Synopsys Designware Multimedia Card Interface Driver [ 1.205239] usbcore: registered new interface driver usbhid [ 1.210834] usbhid: USB HID core driver [ 1.219210] TCP: cubic registered [ 1.222545] NET: Registered protocol family 17 [ 1.227033] can: controller area network core (rev 20120528 abi 9) [ 1.233294] NET: Registered protocol family 29 [ 1.237770] can: raw protocol (rev 20120528) [ 1.242054] can: broadcast manager protocol (rev 20120528 t) [ 1.247754] can: netlink gateway (rev 20130117) max_hops=1 [ 1.253648] Key type dns_resolver registered [ 1.258417] ThumbEE CPU extension supported. [ 1.262717] Registering SWP/SWPB emulation handler [ 1.268720] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.283835] ALSA device list: [ 1.286821] No soundcards found. [ 1.290813] Waiting for root device /dev/mmcblk0p2... [ 60.323396] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports