Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

mainline boot: 32 boots: 32 pass, 0 fail (v3.15-12015-gabf04af)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-12015-gabf04af Full Report =========== arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.0 sec: PASS da850-evm 0 min 14.9 sec: PASS arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.1 sec: PASS am335x-boneblack 0 min 21.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.6 sec: PASS sun4i-a10-cubieboard 0 min 12.7 sec: PASS exynos5410-smdk5410 0 min 28.9 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.2 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 52.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.5 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.2 sec: PASS ste-snowball 1 min 14.4 sec: PASS tegra30-beaver 0 min 20.0 sec: PASS omap3-n900 0 min 16.0 sec: PASS qcom-apq8074-dragonboard 0 min 20.0 sec: PASS bcm28155-ap 0 min 26.6 sec: PASS omap3-overo-tobi 0 min 24.9 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 45.9 sec: PASS exynos5420-arndale-octa 0 min 40.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 1 min 37.5 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.6 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.2 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.8 sec: PASS exynos5250-arndale 1 min 1.5 sec: PASS exynos5410-smdk5410 0 min 27.9 sec: PASS

11 years, 5 months

mainline boot: 23 passed 18 failed (mainline/v3.15-12015-gabf04af)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:31.63 capri bcm_defconfig : FAILED 1:24.33 capri multi_v7_defconfig : FAILED 1:24.97 cubox multi_v7_defconfig : FAILED 1:32.70 dalmore multi_v7_defconfig : FAILED 1:32.87 dalmore multi_lpae_defconfig : FAILED 1:30.46 hummingboard multi_v7_defconfig : FAILED 1:27.47 jetson multi_v7_defconfig : FAILED 1:26.24 jetson multi_lpae_defconfig : FAILED 1:25.70 omap5uevm omap2plus_defconfig : FAILED 1:46.01 omap5uevm multi_v7_defconfig : FAILED 1:47.59 omap5uevm multi_lpae_defconfig : FAILED 1:49.39 sama5 sama5_defconfig : FAILED 3:01.72 seaboard multi_v7_defconfig : FAILED 0:40.72 snow multi_v7_defconfig : FAILED 1:13.12 snow multi_lpae_defconfig : FAILED 1:14.05 snowball u8500_defconfig : FAILED 1:52.00 wandboard multi_v7_defconfig : FAILED 1:34.64 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.00 arndale exynos_defconfig : passed 1:17.47 arndale multi_v7_defconfig : passed 1:37.15 arndale multi_lpae_defconfig : passed 1:20.74 bbb omap2plus_defconfig : passed 1:33.66 bbb multi_v7_defconfig : passed 1:20.42 beaver tegra_defconfig : passed 1:09.34 cubie sunxi_defconfig : passed 1:28.77 cubie multi_v7_defconfig : passed 1:39.59 cubie2 sunxi_defconfig : passed 1:36.51 cubie2 multi_v7_defconfig : passed 1:29.79 cubie2 multi_lpae_defconfig : passed 1:26.87 dalmore tegra_defconfig : passed 1:27.02 hummingboard imx_v6_v7_defconfig : passed 1:25.72 jetson tegra_defconfig : passed 3:59.72 panda omap2plus_defconfig : warnings 1:27.35 panda multi_v7_defconfig : warnings 1:44.88 seaboard tegra_defconfig : passed 1:06.14 snow exynos_defconfig : passed 1:19.44 snowball multi_v7_defconfig : passed 5:09.98 trimslice tegra_defconfig : passed 4:04.12 trimslice multi_v7_defconfig : passed 3:48.65 wandboard imx_v6_v7_defconfig : passed 1:09.52 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.565684] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.571777] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.576742] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.582835] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.590585] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.597695] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.603290] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.609690] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.619687] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.630061] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.636690] [drm] No driver support for vblank timestamp query. [ 3.642650] host1x drm: No connectors reported connected with modes [ 3.648916] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.672026] Console: switching to colour frame buffer device 128x48 [ 3.683759] host1x drm: fb0: frame buffer device [ 3.688455] host1x drm: registered panic notifier [ 3.703606] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.709870] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.717313] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.728808] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.734214] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.742016] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.753214] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.759558] hub 1-0:1.0: USB hub found [ 3.763335] hub 1-0:1.0: 1 port detected [ 3.767710] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.773129] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.780879] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.793594] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.799895] hub 2-0:1.0: USB hub found [ 3.803664] hub 2-0:1.0: 1 port detected [ 3.811609] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.824395] usb1_vbus: disabling [ 3.827798] ALSA device list: [ 3.830798] #0: NVIDIA Tegra Beaver [ 3.835020] Waiting for root device /dev/mmcblk0p1... [ 4.113630] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.582364] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1200 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.225711] hub 2-0:1.0: 1 port detected [ 1.230082] SPEAr-ehci: EHCI SPEAr driver [ 1.234188] tegra-ehci: Tegra EHCI driver [ 1.238316] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244498] ohci-pci: OHCI PCI platform driver [ 1.249004] ohci-platform: OHCI generic platform driver [ 1.254319] ohci-omap3: OHCI OMAP3 driver [ 1.258416] SPEAr-ohci: OHCI SPEAr driver [ 1.263158] usbcore: registered new interface driver usb-storage [ 1.270696] mousedev: PS/2 mouse device common for all mice [ 1.277706] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287049] i2c /dev entries driver [ 1.293343] usbcore: registered new interface driver uvcvideo [ 1.299091] USB Video Class driver (1.1.1) [ 1.303189] gspca_main: v2.14.0 registered [ 1.310493] orion_wdt: Initial timeout 25 sec [ 1.315931] sdhci: Secure Digital Host Controller Interface driver [ 1.322104] sdhci: Copyright(c) Pierre Ossman [ 1.327018] Synopsys Designware Multimedia Card Interface Driver [ 1.333702] usbcore: registered new interface driver usbhid [ 1.339260] usbhid: USB HID core driver [ 1.347266] TCP: cubic registered [ 1.350616] NET: Registered protocol family 17 [ 1.355071] can: controller area network core (rev 20120528 abi 9) [ 1.361301] NET: Registered protocol family 29 [ 1.365737] can: raw protocol (rev 20120528) [ 1.370002] can: broadcast manager protocol (rev 20120528 t) [ 1.375663] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381535] Key type dns_resolver registered [ 1.386014] ThumbEE CPU extension supported. [ 1.390297] Registering SWP/SWPB emulation handler [ 1.395087] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399829] ata1: SATA link down (SStatus 0 SControl F300) [ 1.406249] USB Power: 5000 mV [ 1.409778] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-15 02:29:07 UTC (1402799347) [ 1.420336] ALSA device list: [ 1.423293] No soundcards found. [ 1.427214] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.970262] i2c 0-004c: Driver lm90 requests probe deferral [ 2.977732] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.983340] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.993266] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.999724] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.010025] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.015644] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.025703] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.041821] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.051215] hub 1-0:1.0: USB hub found [ 3.055227] hub 1-0:1.0: 1 port detected [ 3.061266] i2c 0-004c: Driver lm90 requests probe deferral [ 3.068572] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.074123] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.084056] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.090476] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.102155] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.110349] i2c 0-004c: Driver lm90 requests probe deferral [ 3.118036] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.118159] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.118244] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.121221] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.121589] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.191621] VDD_5V0_HDMI_CON: disabling [ 3.195512] vdd_cam_1v8_reg: disabling [ 3.199725] vdd_hdmi_5v0: disabling [ 3.203433] usb1_vbus: disabling [ 3.206753] dvdd_ts: disabling [ 3.212018] ALSA device list: [ 3.215033] #0: NVIDIA Tegra Dalmore [ 3.221520] Waiting for root device /dev/mmcblk0p1... [ 3.406901] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.890283] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.901802] i2c 0-004c: Driver lm90 requests probe deferral [ 3.909301] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.914934] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.924705] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.931099] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.964507] i2c 0-004c: Driver lm90 requests probe deferral [ 2.971834] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.977424] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.987243] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.993702] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.004294] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.009903] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.020206] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.031953] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.041246] hub 1-0:1.0: USB hub found [ 3.045331] hub 1-0:1.0: 1 port detected [ 3.051450] i2c 0-004c: Driver lm90 requests probe deferral [ 3.058898] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.064513] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.074542] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.081016] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.092522] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.100732] i2c 0-004c: Driver lm90 requests probe deferral [ 3.108465] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.108736] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.108829] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.111927] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.112182] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.181335] VDD_5V0_HDMI_CON: disabling [ 3.185310] vdd_cam_1v8_reg: disabling [ 3.189529] vdd_hdmi_5v0: disabling [ 3.193231] usb1_vbus: disabling [ 3.196497] dvdd_ts: disabling [ 3.202583] ALSA device list: [ 3.205592] #0: NVIDIA Tegra Dalmore [ 3.211621] Waiting for root device /dev/mmcblk0p1... [ 3.397333] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.881676] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.893294] i2c 0-004c: Driver lm90 requests probe deferral [ 3.900829] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.906465] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.916255] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.922655] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031585] usbcore: registered new interface driver usb-storage [ 1.042726] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047941] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052886] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065337] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071532] hub 1-0:1.0: USB hub found [ 1.075344] hub 1-0:1.0: 1 port detected [ 1.083029] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.088136] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.093061] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105351] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111503] hub 2-0:1.0: USB hub found [ 1.115305] hub 2-0:1.0: 1 port detected [ 1.120078] mousedev: PS/2 mouse device common for all mice [ 1.128351] i2c /dev entries driver [ 1.133087] usbcore: registered new interface driver uvcvideo [ 1.138869] USB Video Class driver (1.1.1) [ 1.142995] gspca_main: v2.14.0 registered [ 1.149745] sdhci: Secure Digital Host Controller Interface driver [ 1.155957] sdhci: Copyright(c) Pierre Ossman [ 1.161153] Synopsys Designware Multimedia Card Interface Driver [ 1.168109] usbcore: registered new interface driver usbhid [ 1.173712] usbhid: USB HID core driver [ 1.181888] TCP: cubic registered [ 1.185227] NET: Registered protocol family 17 [ 1.189721] can: controller area network core (rev 20120528 abi 9) [ 1.195983] NET: Registered protocol family 29 [ 1.200460] can: raw protocol (rev 20120528) [ 1.204741] can: broadcast manager protocol (rev 20120528 t) [ 1.210433] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216329] Key type dns_resolver registered [ 1.220780] ThumbEE CPU extension supported. [ 1.225080] Registering SWP/SWPB emulation handler [ 1.231081] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246128] ALSA device list: [ 1.249112] No soundcards found. [ 1.253221] Waiting for root device /dev/mmcblk0p2... [ 60.325462] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.063032] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.071254] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.080854] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.087049] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.095203] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.100661] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.108418] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.121836] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.128708] hub 2-0:1.0: USB hub found [ 2.132556] hub 2-0:1.0: 1 port detected [ 2.137412] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.141948] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.149514] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.157738] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.167418] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.173616] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.181783] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.188930] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.193540] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.193583] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.209771] +5V_HDMI_CON: disabling [ 2.209777] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.209807] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.230108] +USB0_VBUS_SW: disabling [ 2.233711] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.238498] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.238684] ALSA device list: [ 2.238689] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.256448] Waiting for root device /dev/mmcblk0p1... [ 2.446871] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.909627] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.920734] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.925321] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.932848] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.941045] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.950565] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.956727] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.053373] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.061596] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.071163] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.077363] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.085554] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.091011] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.098764] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.112101] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.118907] hub 2-0:1.0: USB hub found [ 2.122716] hub 2-0:1.0: 1 port detected [ 2.127422] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.131921] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.139510] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.147740] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.157395] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.163593] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.171999] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.179121] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.183736] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.183788] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.199891] +5V_HDMI_CON: disabling [ 2.199896] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.199923] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.220251] +USB0_VBUS_SW: disabling [ 2.223870] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.228643] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.228830] ALSA device list: [ 2.228834] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.246538] Waiting for root device /dev/mmcblk0p1... [ 2.437127] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.899624] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.910819] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.915417] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.922947] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.931144] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.940648] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.946803] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071493] can: raw protocol (rev 20120528) [ 47.071498] can: broadcast manager protocol (rev 20120528 t) [ 47.071508] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071806] Key type dns_resolver registered [ 47.071890] omap_vc_init_channel: No PMIC info for vdd_core [ 47.071893] omap_vp_init: No PMIC info for vdd_core [ 47.071896] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.071898] omap_vp_init: No PMIC info for vdd_mm [ 47.071902] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.071904] omap_vp_init: No PMIC info for vdd_mpu [ 47.072213] ThumbEE CPU extension supported. [ 47.072228] Registering SWP/SWPB emulation handler [ 47.077563] palmas 0-0048: Irq flag is 0x00000000 [ 47.148773] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.155517] mmc0: new high speed MMC card at address 0001 [ 47.161415] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.166240] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.172500] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.179362] mmcblk0: unknown partition table [ 47.179369] smps123: 600 <--> 1500 mV at 1060 mV [ 47.189754] mmcblk0boot1: unknown partition table [ 47.195010] smps45: 600 <--> 1310 mV at 1030 mV [ 47.195516] mmcblk0boot0: unknown partition table [ 47.206440] smps6: 1200 mV [ 47.210438] smps7: 1800 mV [ 47.214576] smps8: 600 <--> 1310 mV at 1040 mV [ 47.220318] smps9: failed to get the current voltage [ 47.225571] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.237614] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.361852] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.506860] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.512952] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.520404] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.527278] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.535007] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.548494] ALSA device list: [ 47.551589] No soundcards found. [ 47.555596] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.511452] can: raw protocol (rev 20120528) [ 47.511457] can: broadcast manager protocol (rev 20120528 t) [ 47.511466] can: netlink gateway (rev 20130117) max_hops=1 [ 47.511774] Key type dns_resolver registered [ 47.511860] omap_vc_init_channel: No PMIC info for vdd_core [ 47.511864] omap_vp_init: No PMIC info for vdd_core [ 47.511867] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.511869] omap_vp_init: No PMIC info for vdd_mm [ 47.511872] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.511874] omap_vp_init: No PMIC info for vdd_mpu [ 47.512180] ThumbEE CPU extension supported. [ 47.512196] Registering SWP/SWPB emulation handler [ 47.517524] palmas 0-0048: Irq flag is 0x00000000 [ 47.588725] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.595456] mmc0: new high speed MMC card at address 0001 [ 47.601344] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.606159] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.612424] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.619294] mmcblk0: unknown partition table [ 47.619302] smps123: 600 <--> 1500 mV at 1060 mV [ 47.629676] mmcblk0boot1: unknown partition table [ 47.634932] smps45: 600 <--> 1310 mV at 1030 mV [ 47.635446] mmcblk0boot0: unknown partition table [ 47.646356] smps6: 1200 mV [ 47.650354] smps7: 1800 mV [ 47.654483] smps8: 600 <--> 1310 mV at 1040 mV [ 47.660218] smps9: failed to get the current voltage [ 47.665464] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.677515] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.801810] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.946819] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.952917] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.960361] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.967217] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.974930] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.988339] ALSA device list: [ 47.991435] No soundcards found. [ 47.995428] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.923509] NET: Registered protocol family 15 [ 1.923697] Key type dns_resolver registered [ 1.923793] omap_vc_init_channel: No PMIC info for vdd_core [ 1.923797] omap_vp_init: No PMIC info for vdd_core [ 1.923806] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.923809] omap_vp_init: No PMIC info for vdd_mm [ 1.923819] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.923821] omap_vp_init: No PMIC info for vdd_mpu [ 1.924370] ThumbEE CPU extension supported. [ 1.924396] Registering SWP/SWPB emulation handler [ 1.924407] SmartReflex Class3 initialized [ 1.953606] palmas 0-0048: Irq flag is 0x00000000 [ 2.031593] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.036855] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.043304] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.052259] mmcblk0: unknown partition table [ 2.059161] mmcblk0boot1: unknown partition table [ 2.065385] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.066064] mmcblk0boot0: unknown partition table [ 2.123714] smps123: 600 <--> 1500 mV at 1060 mV [ 2.130811] smps45: 600 <--> 1310 mV at 1030 mV [ 2.138171] smps6: 1200 mV [ 2.142931] smps7: 1800 mV [ 2.147853] smps8: 600 <--> 1310 mV at 1040 mV [ 2.154221] smps9: failed to get the current voltage [ 2.160180] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.174509] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.183333] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191082] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.197234] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.206372] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.215758] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.222723] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.231257] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.239883] sr_init: No PMIC hook to init smartreflex [ 2.245369] sr_init: platform driver register failed for SR [ 2.273628] pbias_mmc_omap5: disabling [ 2.279051] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[708]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3259 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.157140] hub 3-0:1.0: USB hub found [ 2.160927] hub 3-0:1.0: 1 port detected [ 2.165769] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.172677] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-15 02:30:15 UTC (1402799415) [ 2.184712] vdd_1v2: disabling [ 2.187941] vdd_1v5: disabling [ 2.191825] ALSA device list: [ 2.194784] #0: NVIDIA Tegra Seaboard [ 2.199188] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.206944] Please append a correct "root=" boot option; here are the available partitions: [ 2.215299] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.223548] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-12015-gabf04af #1 [ 2.230778] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.238514] [<c0211c68>] (show_stack) from [<c0810f90>] (dump_stack+0x88/0x98) [ 2.245724] [<c0810f90>] (dump_stack) from [<c080dde0>] (panic+0xa0/0x218) [ 2.252591] [<c080dde0>] (panic) from [<c0ad60b0>] (mount_block_root+0x1a0/0x230) [ 2.260060] [<c0ad60b0>] (mount_block_root) from [<c0ad6248>] (mount_root+0x108/0x110) [ 2.267962] [<c0ad6248>] (mount_root) from [<c0ad63a8>] (prepare_namespace+0x158/0x1a0) [ 2.275951] [<c0ad63a8>] (prepare_namespace) from [<c0ad5d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.284806] [<c0ad5d6c>] (kernel_init_freeable) from [<c080c0d8>] (kernel_init+0x8/0xf0) [ 2.292881] [<c080c0d8>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.300439] CPU1: stopping [ 2.303140] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-12015-gabf04af #1 [ 2.310356] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.318087] [<c0211c68>] (show_stack) from [<c0810f90>] (dump_stack+0x88/0x98) [ 2.325297] [<c0810f90>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.332678] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.340231] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.347694] Exception stack(0xea087f30 to 0xea087f78) [ 2.352734] 7f20: 00000000 c0bbdf94 c0bbdf94 0000004c [ 2.360893] 7f40: 81774b98 00000000 8914d5a0 00000000 eafb6db0 c0c98428 00000000 ea46cd64 [ 2.369051] 7f60: 00000015 ea087f78 c06b2fec c06b2ff8 60000113 ffffffff [ 2.375656] [<c02127c0>] (__irq_svc) from [<c06b2ff8>] (cpuidle_enter_state+0x68/0x100) [ 2.383647] [<c06b2ff8>] (cpuidle_enter_state) from [<c06b4b5c>] (cpuidle_enter_state_coupled+0x130/0x378) [ 2.393289] [<c06b4b5c>] (cpuidle_enter_state_coupled) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.402751] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.409523] drm_kms_helper: panic occurred, switching back to text console [ 2.416400] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] .text : 0xc0208000 - 0xc0adb1ac (9037 kB) [ 0.000000] .init : 0xc0adc000 - 0xc0b82100 ( 665 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c62dc0 ( 892 kB) [ 0.000000] .bss : 0xc0c62dc8 - 0xc0cafd08 ( 308 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.671724] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.672260] Console: colour dummy device 80x30 [ 2889.672271] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.672279] pid_max: default: 32768 minimum: 301 [ 2889.672339] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.672344] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.672614] CPU: Testing write buffer coherency: ok [ 2889.672726] CPU0: update cpu_capacity 1024 [ 2889.672732] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.672827] Setting up static identity map for 0x4081d9a0 - 0x4081da38 [ 2889.673911] CPU1: Booted secondary processor [ 2889.673944] CPU1: update cpu_capacity 1024 [ 2889.673947] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.673991] Brought up 2 CPUs [ 2889.673999] SMP: Total of 2 processors activated. [ 2889.674003] CPU: All CPU(s) started in HYP mode. [ 2889.674007] CPU: Virtualization extensions available. [ 2889.674244] devtmpfs: initialized [ 2889.676112] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.676309] pinctrl core: initialized pinctrl subsystem [ 2889.676508] regulator-dummy: no parameters [ 2889.682461] NET: Registered protocol family 16 [ 2889.683337] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.684042] cpuidle: using governor ladder [ 2889.684049] cpuidle: using governor m~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.819536] CPU: All CPU(s) started in HYP mode. [ 2889.819539] CPU: Virtualization extensions available. [ 2889.819781] devtmpfs: initialized [ 2889.821675] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.821878] pinctrl core: initialized pinctrl subsystem [ 2889.822081] regulator-dummy: no parameters [ 2889.827964] NET: Registered protocol family 16 [ 2889.828835] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.829559] cpuidle: using governor ladder [ 2889.829566] cpuidle: using governor menu [ 2889.834622] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.838474] No ATAGs? [ 2889.838493] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.838499] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.838593] EXYNOS5250 PMU Initialize [ 2889.839807] Serial: AMBA PL011 UART driver [ 2920.594305] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594317] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594607] vbat-supply: no parameters [ 2920.594746] P5.0V_USB3CON: 5000 mV [ 2920.595904] vgaarb: loaded [ 2920.596184] SCSI subsystem initialized [ 2920.596264] libata version 3.00 loaded. [ 2920.596411] usbcore: registered new interface driver usbfs [ 2920.596441] usbcore: registered new interface driver hub [ 2920.596492] usbcore: registered new device driver usb [ 2920.596919] Linux video capture interface: v2.00 [ 2920.596942] pps_core: LinuxPPS API ver. 1 registered [ 2920.596946] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596961] PTP clock support registered [ 2920.596998] EDAC MC: Ver: 3.0.0 [ 2920.597346] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597811] Switched to clocksource arch_sys_counter [ 2920.602083] NET: Registered protocol family 2 [ 2920.602327] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602364] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602438] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602466] TCP: reno registered [ 2920.602473] UDP hash ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627258] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635192] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647094] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654418] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665893] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674407] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686340] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693664] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705139] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712951] HS USB OTG: no transceiver configured [ 3.717651] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725494] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733428] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745361] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752655] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764129] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772644] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784576] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791900] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803375] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811187] HS USB OTG: no transceiver configured [ 3.815887] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823730] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831665] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843566] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850891] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862365] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870910] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882843] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890136] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901611] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909423] HS USB OTG: no transceiver configured [ 3.914154] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.921997] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.929901] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941833] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949127] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960601] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070093] ohci-platform: OHCI generic platform driver [ 1.075488] ohci-omap3: OHCI OMAP3 driver [ 1.079653] SPEAr-ohci: OHCI SPEAr driver [ 1.084480] usbcore: registered new interface driver usb-storage [ 1.095500] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100580] ci_hdrc ci_hdrc.0: no supported roles [ 1.105414] 2184200.usb supply vbus not found, using dummy regulator [ 1.115518] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120602] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125520] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.142766] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.148950] hub 1-0:1.0: USB hub found [ 1.152750] hub 1-0:1.0: 1 port detected [ 1.157495] mousedev: PS/2 mouse device common for all mice [ 1.165645] i2c /dev entries driver [ 1.170340] usbcore: registered new interface driver uvcvideo [ 1.176117] USB Video Class driver (1.1.1) [ 1.180241] gspca_main: v2.14.0 registered [ 1.186927] sdhci: Secure Digital Host Controller Interface driver [ 1.193135] sdhci: Copyright(c) Pierre Ossman [ 1.198336] Synopsys Designware Multimedia Card Interface Driver [ 1.205247] usbcore: registered new interface driver usbhid [ 1.210844] usbhid: USB HID core driver [ 1.218691] TCP: cubic registered [ 1.222029] NET: Registered protocol family 17 [ 1.226519] can: controller area network core (rev 20120528 abi 9) [ 1.232785] NET: Registered protocol family 29 [ 1.237245] can: raw protocol (rev 20120528) [ 1.241543] can: broadcast manager protocol (rev 20120528 t) [ 1.247235] can: netlink gateway (rev 20130117) max_hops=1 [ 1.253123] Key type dns_resolver registered [ 1.257896] ThumbEE CPU extension supported. [ 1.262200] Registering SWP/SWPB emulation handler [ 1.268148] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.283196] ALSA device list: [ 1.286179] No soundcards found. [ 1.290161] Waiting for root device /dev/mmcblk0p2... [ 60.323261] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 269 warnings 0 failures (mainline/v3.15-12015-gabf04af)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: abf04af Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-12015-gabf04af/ Runtime: 45m 54s Passed: 126 Failed: 0 Warnings: 269 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2575:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2547:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2549:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 21 passed 18 failed (mainline/v3.15-11959-g4a54e5e)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:27.29 capri bcm_defconfig : FAILED 1:24.09 capri multi_v7_defconfig : FAILED 1:24.62 cubox multi_v7_defconfig : FAILED 1:38.88 dalmore multi_v7_defconfig : FAILED 1:33.91 dalmore multi_lpae_defconfig : FAILED 1:30.97 hummingboard multi_v7_defconfig : FAILED 1:27.02 jetson multi_v7_defconfig : FAILED 1:28.42 jetson multi_lpae_defconfig : FAILED 1:29.36 omap5uevm omap2plus_defconfig : FAILED 1:44.69 omap5uevm multi_v7_defconfig : FAILED 1:44.74 omap5uevm multi_lpae_defconfig : FAILED 1:42.75 sama5 sama5_defconfig : FAILED 3:00.95 seaboard multi_v7_defconfig : FAILED 0:41.32 snow multi_lpae_defconfig : FAILED 1:13.73 snowball u8500_defconfig : FAILED 2:19.36 snowball multi_v7_defconfig : FAILED 4:03.98 wandboard multi_v7_defconfig : FAILED 1:41.42 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.89 arndale exynos_defconfig : passed 1:16.09 arndale multi_v7_defconfig : passed 1:35.79 arndale multi_lpae_defconfig : passed 1:22.03 bbb omap2plus_defconfig : passed 1:32.02 bbb multi_v7_defconfig : passed 1:18.14 beaver tegra_defconfig : passed 0:59.81 cubie sunxi_defconfig : passed 1:26.21 cubie multi_v7_defconfig : passed 1:26.95 cubie2 sunxi_defconfig : passed 1:31.68 cubie2 multi_v7_defconfig : passed 1:28.74 cubie2 multi_lpae_defconfig : passed 1:13.21 dalmore tegra_defconfig : passed 1:20.70 hummingboard imx_v6_v7_defconfig : passed 1:31.41 panda omap2plus_defconfig : warnings 1:34.57 panda multi_v7_defconfig : warnings 1:44.63 seaboard tegra_defconfig : passed 1:02.41 snow exynos_defconfig : passed 1:21.32 snow multi_v7_defconfig : passed 1:22.19 trimslice multi_v7_defconfig : passed 3:51.82 wandboard imx_v6_v7_defconfig : passed 1:10.21 Offline boards: jetson tegra_defconfig : OFFLINE 1:38.57 trimslice tegra_defconfig : OFFLINE 1:44.45 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.566478] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.572571] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.577536] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.583629] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.591379] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.598504] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.604097] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.610479] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.620476] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.630836] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.637465] [drm] No driver support for vblank timestamp query. [ 3.643413] host1x drm: No connectors reported connected with modes [ 3.649677] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.673501] Console: switching to colour frame buffer device 128x48 [ 3.685217] host1x drm: fb0: frame buffer device [ 3.689913] host1x drm: registered panic notifier [ 3.708611] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.714880] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.722323] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.733801] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.739207] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.747014] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.758217] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.764571] hub 1-0:1.0: USB hub found [ 3.768348] hub 1-0:1.0: 1 port detected [ 3.772714] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.778127] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.785877] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.798599] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.804899] hub 2-0:1.0: USB hub found [ 3.808669] hub 2-0:1.0: 1 port detected [ 3.816637] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.829399] usb1_vbus: disabling [ 3.832802] ALSA device list: [ 3.835799] #0: NVIDIA Tegra Beaver [ 3.840030] Waiting for root device /dev/mmcblk0p1... [ 4.118621] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.587495] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.225713] hub 2-0:1.0: 1 port detected [ 1.230084] SPEAr-ehci: EHCI SPEAr driver [ 1.234191] tegra-ehci: Tegra EHCI driver [ 1.238329] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244517] ohci-pci: OHCI PCI platform driver [ 1.249024] ohci-platform: OHCI generic platform driver [ 1.254339] ohci-omap3: OHCI OMAP3 driver [ 1.258436] SPEAr-ohci: OHCI SPEAr driver [ 1.263176] usbcore: registered new interface driver usb-storage [ 1.270713] mousedev: PS/2 mouse device common for all mice [ 1.277727] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287077] i2c /dev entries driver [ 1.293236] usbcore: registered new interface driver uvcvideo [ 1.298992] USB Video Class driver (1.1.1) [ 1.303096] gspca_main: v2.14.0 registered [ 1.310402] orion_wdt: Initial timeout 25 sec [ 1.315849] sdhci: Secure Digital Host Controller Interface driver [ 1.322018] sdhci: Copyright(c) Pierre Ossman [ 1.326931] Synopsys Designware Multimedia Card Interface Driver [ 1.333607] usbcore: registered new interface driver usbhid [ 1.339166] usbhid: USB HID core driver [ 1.347278] TCP: cubic registered [ 1.350627] NET: Registered protocol family 17 [ 1.355082] can: controller area network core (rev 20120528 abi 9) [ 1.361320] NET: Registered protocol family 29 [ 1.365764] can: raw protocol (rev 20120528) [ 1.370029] can: broadcast manager protocol (rev 20120528 t) [ 1.375691] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381563] Key type dns_resolver registered [ 1.386042] ThumbEE CPU extension supported. [ 1.390325] Registering SWP/SWPB emulation handler [ 1.395115] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399859] ata1: SATA link down (SStatus 0 SControl F300) [ 1.406303] USB Power: 5000 mV [ 1.409867] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-14 23:09:06 UTC (1402787346) [ 1.420398] ALSA device list: [ 1.423355] No soundcards found. [ 1.427278] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.968771] i2c 0-004c: Driver lm90 requests probe deferral [ 2.976047] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.981662] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.991420] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.997872] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.008399] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.014007] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.024834] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.036512] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.045786] hub 1-0:1.0: USB hub found [ 3.049868] hub 1-0:1.0: 1 port detected [ 3.055973] i2c 0-004c: Driver lm90 requests probe deferral [ 3.063446] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.069061] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.079054] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.085508] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.097027] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.105210] i2c 0-004c: Driver lm90 requests probe deferral [ 3.112962] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.113192] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.113286] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.116288] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.116654] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.186303] VDD_5V0_HDMI_CON: disabling [ 3.190283] vdd_cam_1v8_reg: disabling [ 3.194504] vdd_hdmi_5v0: disabling [ 3.198214] usb1_vbus: disabling [ 3.201523] dvdd_ts: disabling [ 3.206664] ALSA device list: [ 3.209660] #0: NVIDIA Tegra Dalmore [ 3.215690] Waiting for root device /dev/mmcblk0p1... [ 3.401885] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.885275] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.896797] i2c 0-004c: Driver lm90 requests probe deferral [ 3.904320] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.909957] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.919712] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.926106] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.965730] i2c 0-004c: Driver lm90 requests probe deferral [ 2.973183] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.978794] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.988722] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.995197] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.005581] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.011200] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.021305] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.037520] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.047345] hub 1-0:1.0: USB hub found [ 3.051341] hub 1-0:1.0: 1 port detected [ 3.057855] i2c 0-004c: Driver lm90 requests probe deferral [ 3.065421] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.071053] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.081053] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.087570] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.099615] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.107807] i2c 0-004c: Driver lm90 requests probe deferral [ 3.113517] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.152183] VDD_5V0_HDMI_CON: disabling [ 3.156088] vdd_cam_1v8_reg: disabling [ 3.160317] vdd_hdmi_5v0: disabling [ 3.163980] usb1_vbus: disabling [ 3.167285] dvdd_ts: disabling [ 3.174776] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.175449] ALSA device list: [ 3.175465] #0: NVIDIA Tegra Dalmore [ 3.187259] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.190209] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.190454] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.210115] Waiting for root device /dev/mmcblk0p1... [ 3.367608] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.851133] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.862801] i2c 0-004c: Driver lm90 requests probe deferral [ 3.870340] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.875975] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.885823] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.892267] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031425] usbcore: registered new interface driver usb-storage [ 1.042588] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047799] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052743] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065193] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071377] hub 1-0:1.0: USB hub found [ 1.075209] hub 1-0:1.0: 1 port detected [ 1.082871] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.087977] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.092902] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105202] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111350] hub 2-0:1.0: USB hub found [ 1.115150] hub 2-0:1.0: 1 port detected [ 1.119920] mousedev: PS/2 mouse device common for all mice [ 1.128199] i2c /dev entries driver [ 1.132941] usbcore: registered new interface driver uvcvideo [ 1.138721] USB Video Class driver (1.1.1) [ 1.142849] gspca_main: v2.14.0 registered [ 1.149629] sdhci: Secure Digital Host Controller Interface driver [ 1.155844] sdhci: Copyright(c) Pierre Ossman [ 1.161044] Synopsys Designware Multimedia Card Interface Driver [ 1.167987] usbcore: registered new interface driver usbhid [ 1.173588] usbhid: USB HID core driver [ 1.181777] TCP: cubic registered [ 1.185114] NET: Registered protocol family 17 [ 1.189611] can: controller area network core (rev 20120528 abi 9) [ 1.195873] NET: Registered protocol family 29 [ 1.200346] can: raw protocol (rev 20120528) [ 1.204629] can: broadcast manager protocol (rev 20120528 t) [ 1.210320] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216203] Key type dns_resolver registered [ 1.220649] ThumbEE CPU extension supported. [ 1.224949] Registering SWP/SWPB emulation handler [ 1.230943] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.245903] ALSA device list: [ 1.248888] No soundcards found. [ 1.252953] Waiting for root device /dev/mmcblk0p2... [ 60.325312] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.057925] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.066118] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.075659] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.081813] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.089948] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.095407] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.103230] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.116850] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.123639] hub 2-0:1.0: USB hub found [ 2.127452] hub 2-0:1.0: 1 port detected [ 2.132213] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.136756] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.144314] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.152538] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.162179] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.168377] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.176792] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.183917] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.188526] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.188580] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.204758] +5V_HDMI_CON: disabling [ 2.204764] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.204793] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.225094] +USB0_VBUS_SW: disabling [ 2.228709] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.233487] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.233669] ALSA device list: [ 2.233674] #0: NVIDIA Tegra Jetson TK1 [ 2.2 Driver tegra-hdmi requests probe deferral [ 2.251465] Waiting for root device /dev/mmcblk0p1... [ 2.441901] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.904693] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.915796] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.920386] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.927915] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.936112] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.945631] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.951784] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.063348] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.071572] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.081118] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.087317] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.095477] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.100933] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.108668] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.122094] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.128960] hub 2-0:1.0: USB hub found [ 2.132804] hub 2-0:1.0: 1 port detected [ 2.137530] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.142075] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.149632] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.157857] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.167480] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.173679] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.181904] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.189154] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.193757] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.193767] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:21 UTC (949363221) [ 2.209900] +5V_HDMI_CON: disabling [ 2.209905] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.209935] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.230257] +USB0_VBUS_SW: disabling [ 2.233873] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.238650] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.238837] ALSA device list: [ 2.238841] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.256543] Waiting for root device /dev/mmcblk0p1... [ 2.447142] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.909910] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.921108] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.925708] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.933236] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.941434] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.950935] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.957090] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071527] can: raw protocol (rev 20120528) [ 47.071532] can: broadcast manager protocol (rev 20120528 t) [ 47.071542] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071843] Key type dns_resolver registered [ 47.071925] omap_vc_init_channel: No PMIC info for vdd_core [ 47.071928] omap_vp_init: No PMIC info for vdd_core [ 47.071931] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.071933] omap_vp_init: No PMIC info for vdd_mm [ 47.071936] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.071938] omap_vp_init: No PMIC info for vdd_mpu [ 47.072247] ThumbEE CPU extension supported. [ 47.072262] Registering SWP/SWPB emulation handler [ 47.077579] palmas 0-0048: Irq flag is 0x00000000 [ 47.148820] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.155562] mmc0: new high speed MMC card at address 0001 [ 47.161463] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.166291] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.172557] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.179425] smps123: 600 <--> 1500 mV at 1060 mV [ 47.179428] mmcblk0: unknown partition table [ 47.187001] mmcblk0boot1: unknown partition table [ 47.187744] mmcblk0boot0: unknown partition table [ 47.200081] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206502] smps6: 1200 mV [ 47.210469] smps7: 1800 mV [ 47.214607] smps8: 600 <--> 1310 mV at 1040 mV [ 47.220341] smps9: failed to get the current voltage [ 47.225591] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.237626] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.361869] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.506880] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.512968] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.520419] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.527281] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.534986] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.548441] ALSA device list: [ 47.551539] No soundcards found. [ 47.555537] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.511467] can: raw protocol (rev 20120528) [ 47.511472] can: broadcast manager protocol (rev 20120528 t) [ 47.511481] can: netlink gateway (rev 20130117) max_hops=1 [ 47.511788] Key type dns_resolver registered [ 47.511876] omap_vc_init_channel: No PMIC info for vdd_core [ 47.511879] omap_vp_init: No PMIC info for vdd_core [ 47.511883] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.511885] omap_vp_init: No PMIC info for vdd_mm [ 47.511888] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.511890] omap_vp_init: No PMIC info for vdd_mpu [ 47.512199] ThumbEE CPU extension supported. [ 47.512215] Registering SWP/SWPB emulation handler [ 47.517554] palmas 0-0048: Irq flag is 0x00000000 [ 47.588732] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.595481] mmc0: new high speed MMC card at address 0001 [ 47.601375] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.606188] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.612449] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.619309] mmcblk0: unknown partition table [ 47.623894] smps123: 600 <--> 1500 mV at 1060 mV [ 47.629165] mmcblk0boot1: unknown partition table [ 47.634959] mmcblk0boot0: unknown partition table [ 47.639989] smps45: 600 <--> 1310 mV at 1030 mV [ 47.646472] smps6: 1200 mV [ 47.650469] smps7: 1800 mV [ 47.654618] smps8: 600 <--> 1310 mV at 1040 mV [ 47.660344] smps9: failed to get the current voltage [ 47.665591] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.677650] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.806827] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.951835] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.957933] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.965369] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.972222] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.979940] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.993348] ALSA device list: [ 47.996437] No soundcards found. [ 48.000437] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.923552] NET: Registered protocol family 15 [ 1.923726] Key type dns_resolver registered [ 1.923824] omap_vc_init_channel: No PMIC info for vdd_core [ 1.923827] omap_vp_init: No PMIC info for vdd_core [ 1.923837] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.923840] omap_vp_init: No PMIC info for vdd_mm [ 1.923849] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.923852] omap_vp_init: No PMIC info for vdd_mpu [ 1.924402] ThumbEE CPU extension supported. [ 1.924426] Registering SWP/SWPB emulation handler [ 1.924438] SmartReflex Class3 initialized [ 1.953631] palmas 0-0048: Irq flag is 0x00000000 [ 2.031845] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.036947] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.043451] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.052407] mmcblk0: unknown partition table [ 2.059395] mmcblk0boot1: unknown partition table [ 2.066093] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.066250] mmcblk0boot0: unknown partition table [ 2.123782] smps123: 600 <--> 1500 mV at 1060 mV [ 2.130855] smps45: 600 <--> 1310 mV at 1030 mV [ 2.138171] smps6: 1200 mV [ 2.142923] smps7: 1800 mV [ 2.147821] smps8: 600 <--> 1310 mV at 1040 mV [ 2.154223] smps9: failed to get the current voltage [ 2.160178] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.174555] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.183392] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191138] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.197285] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.206391] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.215756] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.222709] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.231187] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.239825] sr_init: No PMIC hook to init smartreflex [ 2.245364] sr_init: platform driver register failed for SR [ 2.273560] pbias_mmc_omap5: disabling [ 2.279091] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[708]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3072 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.145598] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.152130] hub 3-0:1.0: USB hub found [ 2.155923] hub 3-0:1.0: 1 port detected [ 2.160766] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.167680] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-14 23:10:02 UTC (1402787402) [ 2.179688] vdd_1v2: disabling [ 2.182922] vdd_1v5: disabling [ 2.186804] ALSA device list: [ 2.189762] #0: NVIDIA Tegra Seaboard [ 2.194171] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.201929] Please append a correct "root=" boot option; here are the available partitions: [ 2.210285] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.218534] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-11959-g4a54e5e #1 [ 2.225763] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.233500] [<c0211c68>] (show_stack) from [<c0810f90>] (dump_stack+0x88/0x98) [ 2.240709] [<c0810f90>] (dump_stack) from [<c080dde0>] (panic+0xa0/0x218) [ 2.247576] [<c080dde0>] (panic) from [<c0ad60b0>] (mount_block_root+0x1a0/0x230) [ 2.255045] [<c0ad60b0>] (mount_block_root) from [<c0ad6248>] (mount_root+0x108/0x110) [ 2.262947] [<c0ad6248>] (mount_root) from [<c0ad63a8>] (prepare_namespace+0x158/0x1a0) [ 2.270936] [<c0ad63a8>] (prepare_namespace) from [<c0ad5d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.279790] [<c0ad5d6c>] (kernel_init_freeable) from [<c080c0d8>] (kernel_init+0x8/0xf0) [ 2.287865] [<c080c0d8>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.295418] CPU1: stopping [ 2.298119] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-11959-g4a54e5e #1 [ 2.305336] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.313067] [<c0211c68>] (show_stack) from [<c0810f90>] (dump_stack+0x88/0x98) [ 2.320276] [<c0810f90>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.327658] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.335212] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.342676] Exception stack(0xea087f68 to 0xea087fb0) [ 2.347716] 7f60: 00000000 c0bbdf94 c0bbdf94 0000004c 887ebfc0 00000000 [ 2.355877] 7f80: 88c8a5b8 00000000 eafb6db0 ea086000 00000000 c081e054 00000015 ea087fb0 [ 2.364034] 7fa0: c06b2fec c06b2ff8 60000113 ffffffff [ 2.369081] [<c02127c0>] (__irq_svc) from [<c06b2ff8>] (cpuidle_enter_state+0x68/0x100) [ 2.377078] [<c06b2ff8>] (cpuidle_enter_state) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.385847] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.392618] drm_kms_helper: panic occurred, switching back to text console [ 2.399497] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] HighMem zone: 2568 pages used for memmap [ 0.000000] HighMem zone: 328704 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @ea79a000 s8448 r8192 d16128 u32768 [ 0.000000] pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521744 [ 0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998952K/2093056K available (6459K kernel code, 891K rwdata, 2576K rodata, 664K init, 307K bss, 94104K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0adb1ac (9037 kB) [ 0.000000] .init : 0xc0adc000 - 0xc0b82100 ( 665 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c62dc0 ( 892 kB) [ 0.000000] .bss : 0xc0c62dc8 - 0xc0cafd08 ( 308 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.567426] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.567965] Console: colour dummy device 80x30 [ 2889.567976] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.567983] pid_max: default: 32768 minimum: 301 [ 2889.568044] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.568049] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.5~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...[ 57.850067] smsc911x 50000000.ethernet eth0: MAC Address: 08:00:08:1e:0f:44 Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 58.135925] smsc911x 50000000.ethernet eth0: SMSC911x/921x identified at 0xf0060000, IRQ: 300 Listening on LPF/eth0/08:00:08:1e:0f:44 Sending on LPF/eth0/08:00:08:1e:0f:44 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 5 bad IP checksums seen in 5 packets DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 1 No DHCPOFFERS received. Trying recorded lease 172.16.1.108 PING 172.16.1.1 (172.16.1.1) 56(84) bytes of data. --- 172.16.1.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.702/0.702/0.702/0.000 ms bound: renewal in 1455 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627288] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635223] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647125] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654449] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665954] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674468] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686401] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693695] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705200] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.713012] HS USB OTG: no transceiver configured [ 3.717712] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725555] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733459] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745391] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752716] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764190] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772705] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784637] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791931] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803436] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811218] HS USB OTG: no transceiver configured [ 3.815948] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823791] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831695] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843627] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850952] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862426] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870971] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882873] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890167] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901672] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909454] HS USB OTG: no transceiver configured [ 3.914184] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.922027] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.929931] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941864] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949157] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960662] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070040] ohci-platform: OHCI generic platform driver [ 1.075427] ohci-omap3: OHCI OMAP3 driver [ 1.079589] SPEAr-ohci: OHCI SPEAr driver [ 1.084422] usbcore: registered new interface driver usb-storage [ 1.095434] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100512] ci_hdrc ci_hdrc.0: no supported roles [ 1.105345] 2184200.usb supply vbus not found, using dummy regulator [ 1.115443] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120526] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125445] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.142710] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.148888] hub 1-0:1.0: USB hub found [ 1.152696] hub 1-0:1.0: 1 port detected [ 1.157432] mousedev: PS/2 mouse device common for all mice [ 1.165608] i2c /dev entries driver [ 1.170301] usbcore: registered new interface driver uvcvideo [ 1.176079] USB Video Class driver (1.1.1) [ 1.180203] gspca_main: v2.14.0 registered [ 1.186879] sdhci: Secure Digital Host Controller Interface driver [ 1.193085] sdhci: Copyright(c) Pierre Ossman [ 1.198288] Synopsys Designware Multimedia Card Interface Driver [ 1.205195] usbcore: registered new interface driver usbhid [ 1.210793] usbhid: USB HID core driver [ 1.218632] TCP: cubic registered [ 1.221973] NET: Registered protocol family 17 [ 1.226463] can: controller area network core (rev 20120528 abi 9) [ 1.232726] NET: Registered protocol family 29 [ 1.237185] can: raw protocol (rev 20120528) [ 1.241482] can: broadcast manager protocol (rev 20120528 t) [ 1.247171] can: netlink gateway (rev 20130117) max_hops=1 [ 1.253047] Key type dns_resolver registered [ 1.257820] ThumbEE CPU extension supported. [ 1.262123] Registering SWP/SWPB emulation handler [ 1.268065] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.283049] ALSA device list: [ 1.286033] No soundcards found. [ 1.290005] Waiting for root device /dev/mmcblk0p2... [ 60.323196] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 269 warnings 0 failures (mainline/v3.15-11959-g4a54e5e)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 4a54e5e Merge tag 'hsi-for-3.16-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-11959-g4a54e5e/ Runtime: 45m 53s Passed: 126 Failed: 0 Warnings: 269 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2575:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2547:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2549:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

arm-soc boot: 28 boots: 28 pass, 0 fail (v3.15-8902-g213d819)

by Kevin's boot bot

Tree/Branch: arm-soc Git describe: v3.15-8902-g213d819 Full Report =========== arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.5 sec: PASS am335x-boneblack 0 min 21.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 29.1 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 53.6 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.2 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 11.4 sec: PASS tegra30-beaver 0 min 19.6 sec: PASS omap3-n900 0 min 15.3 sec: PASS qcom-apq8074-dragonboard 0 min 19.9 sec: PASS bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS omap3-overo-storm-tobi 0 min 20.9 sec: PASS omap3-beagle-xm 0 min 52.7 sec: PASS exynos5420-arndale-octa 1 min 12.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 41.9 sec: PASS (Warnings: 1) omap4-panda-es 0 min 55.8 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.3 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.7 sec: PASS sun4i-a10-cubieboard 0 min 16.3 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.1 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.7 sec: PASS (Warnings: 1)

11 years, 5 months

arm-soc boot: 34 passed 7 failed (arm-soc/v3.15-8902-g213d819)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:23.15 cubie2 multi_v7_defconfig : FAILED 1:37.10 cubie2 multi_lpae_defconfig : FAILED 1:21.79 omap5uevm omap2plus_defconfig : FAILED 1:45.92 omap5uevm multi_v7_defconfig : FAILED 1:51.72 omap5uevm multi_lpae_defconfig : FAILED 1:50.96 snowball u8500_defconfig : FAILED 1:53.07 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.24 arndale exynos_defconfig : passed 1:16.64 arndale multi_v7_defconfig : passed 1:40.74 arndale multi_lpae_defconfig : passed 1:26.63 bbb omap2plus_defconfig : passed 1:33.51 bbb multi_v7_defconfig : passed 1:25.14 beaver tegra_defconfig : passed 0:58.46 beaver multi_v7_defconfig : passed 1:02.67 capri bcm_defconfig : passed 0:39.89 capri multi_v7_defconfig : passed 0:41.05 cubie sunxi_defconfig : passed 1:20.13 cubie multi_v7_defconfig : passed 1:33.44 cubox multi_v7_defconfig : passed 1:14.96 dalmore tegra_defconfig : passed 1:27.09 dalmore multi_v7_defconfig : passed 1:28.09 dalmore multi_lpae_defconfig : passed 1:20.88 hummingboard imx_v6_v7_defconfig : passed 1:14.69 hummingboard multi_v7_defconfig : passed 1:14.49 jetson tegra_defconfig : passed 1:02.95 jetson multi_v7_defconfig : passed 0:56.55 jetson multi_lpae_defconfig : passed 1:00.07 panda omap2plus_defconfig : warnings 1:31.72 panda multi_v7_defconfig : warnings 1:50.13 sama5 sama5_defconfig : warnings 1:55.10 seaboard tegra_defconfig : passed 1:05.00 seaboard multi_v7_defconfig : passed 1:15.99 snow exynos_defconfig : passed 1:29.53 snow multi_v7_defconfig : passed 1:23.75 snow multi_lpae_defconfig : passed 1:22.71 snowball multi_v7_defconfig : passed 3:35.33 trimslice tegra_defconfig : passed 1:02.97 trimslice multi_v7_defconfig : passed 1:21.09 wandboard imx_v6_v7_defconfig : passed 1:09.50 wandboard multi_v7_defconfig : passed 1:19.07 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.329044] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338011] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347550] scsi0 : ahci_platform [ 1.351267] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360007] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365655] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373720] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.379931] mmc0: new high speed SDHC card at address aaaa [ 1.385810] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392096] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397638] hub 1-0:1.0: USB hub found [ 1.401876] hub 1-0:1.0: 1 port detected [ 1.405976] mmcblk0: p1 [ 1.410262] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.415955] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.423934] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435316] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442285] hub 2-0:1.0: USB hub found [ 1.446137] hub 2-0:1.0: 1 port detected [ 1.451156] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457860] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465702] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530164] hub 3-0:1.0: USB hub found [ 1.534017] hub 3-0:1.0: 1 port detected [ 1.539012] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545731] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553591] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615132] hub 4-0:1.0: USB hub found [ 1.618975] hub 4-0:1.0: 1 port detected [ 1.623638] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.711196] No MAC Management Counters available [ 1.715970] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722597] IP-Config: Failed to open eth0 [ 1.726722] IP-Config: No network devices available [ 1.731639] vcc3v0: disabling [ 1.734717] ALSA device list: [ 1.737697] No soundcards found. [ 1.741834] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.324377] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333344] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342903] scsi0 : ahci_platform [ 1.346612] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355358] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.361011] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.369065] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375269] mmc0: new high speed SDHC card at address aaaa [ 1.381144] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387416] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392967] hub 1-0:1.0: USB hub found [ 1.397201] hub 1-0:1.0: 1 port detected [ 1.401297] mmcblk0: p1 [ 1.405601] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411285] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419267] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430651] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437666] hub 2-0:1.0: USB hub found [ 1.441505] hub 2-0:1.0: 1 port detected [ 1.446507] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453195] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.461033] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525523] hub 3-0:1.0: USB hub found [ 1.529366] hub 3-0:1.0: 1 port detected [ 1.534381] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.541106] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548948] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610489] hub 4-0:1.0: USB hub found [ 1.614333] hub 4-0:1.0: 1 port detected [ 1.618999] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.706521] No MAC Management Counters available [ 1.711291] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717910] IP-Config: Failed to open eth0 [ 1.722033] IP-Config: No network devices available [ 1.726953] vcc3v0: disabling [ 1.730036] ALSA device list: [ 1.733015] No soundcards found. [ 1.737157] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.993990] mmc0: new high speed SDHC card at address aaaa [ 0.999918] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005926] mmcblk0: p1 [ 1.016186] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023669] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029582] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038552] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047445] scsi0 : ahci_platform [ 1.051089] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059361] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064959] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072828] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096112] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103073] hub 1-0:1.0: USB hub found [ 1.106910] hub 1-0:1.0: 1 port detected [ 1.111380] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117017] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124853] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146105] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152997] hub 2-0:1.0: USB hub found [ 1.156824] hub 2-0:1.0: 1 port detected [ 1.161272] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167946] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175786] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240920] hub 3-0:1.0: USB hub found [ 1.244716] hub 3-0:1.0: 1 port detected [ 1.249233] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255866] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263742] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330940] hub 4-0:1.0: USB hub found [ 1.334727] hub 4-0:1.0: 1 port detected [ 1.339086] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.426133] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442422] No MAC Management Counters available [ 1.447185] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453785] IP-Config: Failed to open eth0 [ 1.457912] IP-Config: No network devices available [ 1.462809] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.092546] NET: Registered protocol family 17 [ 47.092572] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.102160] mmcblk0: unknown partition table [ 47.102936] mmcblk0boot1: unknown partition table [ 47.103699] mmcblk0boot0: unknown partition table [ 47.117938] can: controller area network core (rev 20120528 abi 9) [ 47.124430] NET: Registered protocol family 29 [ 47.129077] can: raw protocol (rev 20120528) [ 47.133542] can: broadcast manager protocol (rev 20120528 t) [ 47.139465] can: netlink gateway (rev 20130117) max_hops=1 [ 47.145469] Key type dns_resolver registered [ 47.149996] omap_vc_init_channel: No PMIC info for vdd_core [ 47.155822] omap_vp_init: No PMIC info for vdd_core [ 47.160914] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.166556] omap_vp_init: No PMIC info for vdd_mm [ 47.171463] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.177201] omap_vp_init: No PMIC info for vdd_mpu [ 47.182491] ThumbEE CPU extension supported. [ 47.186962] Registering SWP/SWPB emulation handler [ 47.193153] palmas 0-0048: Irq flag is 0x00000000 [ 47.200826] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.208412] smps123: 600 <--> 1500 mV at 1060 mV [ 47.214514] smps45: 600 <--> 1310 mV at 1030 mV [ 47.220972] smps6: 1200 mV [ 47.224970] smps7: 1800 mV [ 47.229101] smps8: 600 <--> 1310 mV at 1040 mV [ 47.234823] smps9: failed to get the current voltage [ 47.240072] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.252120] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.376798] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.521807] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.527880] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.535320] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.542187] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.549903] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.563344] ALSA device list: [ 47.566440] No soundcards found. [ 47.570443] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.516631] can: raw protocol (rev 20120528) [ 47.516638] can: broadcast manager protocol (rev 20120528 t) [ 47.516650] can: netlink gateway (rev 20130117) max_hops=1 [ 47.516957] Key type dns_resolver registered [ 47.517037] omap_vc_init_channel: No PMIC info for vdd_core [ 47.517039] omap_vp_init: No PMIC info for vdd_core [ 47.517043] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.517045] omap_vp_init: No PMIC info for vdd_mm [ 47.517048] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.517050] omap_vp_init: No PMIC info for vdd_mpu [ 47.517365] ThumbEE CPU extension supported. [ 47.517378] Registering SWP/SWPB emulation handler [ 47.522540] palmas 0-0048: Irq flag is 0x00000000 [ 47.600283] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.606956] mmc0: new high speed MMC card at address 0001 [ 47.612885] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.617698] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.623976] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.630619] smps123: 600 <--> 1500 mV at 1060 mV [ 47.635568] mmcblk0: unknown partition table [ 47.641058] mmcblk0boot1: unknown partition table [ 47.646305] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651564] mmcblk0boot0: unknown partition table [ 47.657769] smps6: 1200 mV [ 47.661798] smps7: 1800 mV [ 47.665906] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671654] smps9: failed to get the current voltage [ 47.676903] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.688956] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816815] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961826] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.967914] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975365] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982216] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.989932] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003365] ALSA device list: [ 48.006465] No soundcards found. [ 48.010470] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.003038] NET: Registered protocol family 15 [ 2.003214] Key type dns_resolver registered [ 2.003310] omap_vc_init_channel: No PMIC info for vdd_core [ 2.003313] omap_vp_init: No PMIC info for vdd_core [ 2.003323] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.003326] omap_vp_init: No PMIC info for vdd_mm [ 2.003336] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.003339] omap_vp_init: No PMIC info for vdd_mpu [ 2.003897] ThumbEE CPU extension supported. [ 2.003918] Registering SWP/SWPB emulation handler [ 2.003927] SmartReflex Class3 initialized [ 2.021002] palmas 0-0048: Irq flag is 0x00000000 [ 2.111532] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.116616] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.123065] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.132145] mmcblk0: unknown partition table [ 2.138766] mmcblk0boot1: unknown partition table [ 2.145045] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.145685] mmcblk0boot0: unknown partition table [ 2.203307] smps123: 600 <--> 1500 mV at 1060 mV [ 2.210323] smps45: 600 <--> 1310 mV at 1030 mV [ 2.217639] smps6: 1200 mV [ 2.222422] smps7: 1800 mV [ 2.227373] smps8: 600 <--> 1310 mV at 1040 mV [ 2.233866] smps9: failed to get the current voltage [ 2.239867] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.254213] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.263057] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.270766] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.276913] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.286025] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.295382] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.302332] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.310806] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.319442] sr_init: No PMIC hook to init smartreflex [ 2.324974] sr_init: platform driver register failed for SR [ 2.353101] pbias_mmc_omap5: disabling [ 2.358631] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.637359] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.645294] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.657196] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.664520] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675994] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.684509] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.696441] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.703735] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.715240] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.723052] HS USB OTG: no transceiver configured [ 3.727752] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.735595] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.743530] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755432] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.762756] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774230] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.782775] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794677] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802001] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813476] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821319] HS USB OTG: no transceiver configured [ 3.826019] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.833862] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.841766] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853698] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.861022] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872497] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881042] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.892944] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.900268] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911743] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919555] HS USB OTG: no transceiver configured [ 3.924255] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932128] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940032] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.951934] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.959259] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970733] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

11 years, 5 months

arm-soc build: 41 warnings 0 failures (arm-soc/v3.15-8902-g213d819)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 213d819 ARM: omap: rework platform selection Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.15-8902-g213d819/ Runtime: 46m 18s Passed: 126 Failed: 0 Warnings: 41 Section mismatches: 16 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

next boot: 64 boots: 62 pass, 2 fail (next-20140613)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140613 Failed boot tests (console logs at the end) =========================================== exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.3 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS tegra30-beaver 0 min 17.5 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS omap5-uevm 1 min 38.8 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.9 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.6 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 36.4 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 50.5 sec: PASS legacy,3530beagle 0 min 29.2 sec: PASS (Warnings: 1) omap4-panda 0 min 54.2 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.1 sec: PASS am335x-bone 0 min 23.9 sec: PASS omap3-overo-storm-tobi 0 min 24.9 sec: PASS omap5-uevm 0 min 57.3 sec: PASS (Warnings: 1) omap3-n900 0 min 17.2 sec: PASS legacy,n900 0 min 16.1 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.5 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.0 sec: PASS am335x-boneblack 0 min 21.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 28.7 sec: PASS am335x-bone 0 min 33.5 sec: PASS tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 51.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 14.9 sec: PASS ste-snowball 1 min 14.3 sec: PASS tegra30-beaver 0 min 17.3 sec: PASS omap3-n900 0 min 16.4 sec: PASS qcom-apq8074-dragonboard 0 min 19.1 sec: PASS bcm28155-ap 0 min 26.9 sec: PASS omap3-overo-tobi 0 min 22.3 sec: PASS omap3-overo-storm-tobi 0 min 24.4 sec: PASS omap3-beagle-xm 0 min 47.0 sec: PASS exynos5420-arndale-octa 0 min 41.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 39.8 sec: PASS (Warnings: 1) omap4-panda-es 0 min 53.9 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 35.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.4 sec: PASS sun4i-a10-cubieboard 0 min 11.6 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.8 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.4 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.8 sec: FAIL exynos5250-arndale 0 min 31.8 sec: PASS exynos5410-smdk5410 0 min 27.0 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.6 sec: PASS imx6q-wandboard 0 min 13.8 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.3 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.5 sec: PASS armada-370-mirabox 0 min 22.2 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.0 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 16.252114] mmcblk0: p1 p2 p3 p4 [ 16.255282] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00b8088 [ 16.262820] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.267756] Modules linked in: [ 16.270793] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-next-20140613 #1 [ 16.279292] Workqueue: kmmcd mmc_rescan [ 16.283095] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.288474] PC is at rescan_partitions+0xb4/0x290 [ 16.293147] LR is at 0xf00b8000 [ 16.296268] pc : [<c01b01c0>] lr : [<f00b8000>] psr: 20000113 [ 16.296268] sp : ef0b5c80 ip : 00000000 fp : 00000000 [ 16.307704] r10: 00000000 r9 : ed681040 r8 : ed667200 [ 16.312903] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.319402] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.325903] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.333181] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.338900] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.345226] Stack: (0xef0b5c80 to 0xef0b6000) [ 16.349561] 5c80: c0548484 00000001 ef0b4000 c0389290 00000001 c05245b8 ed60f598 c0524488 [ 16.357706] 5ca0: eec24380 ed60f468 eec24330 eec24280 00000000 ed60f468 00000000 00000000 [ 16.365852] 5cc0: 00000000 eec24280 ed667200 eec24290 00000001 00000000 00000000 c00e3e24 [ 16.373997] 5ce0: c00e2824 00000000 00000000 00000001 eec24280 00000000 ed667270 ed66720c [ 16.382142] 5d00: 00000000 ed60f380 00000003 c00e4088 c0526794 00000001 00000003 c038a710 [ 16.390288] 5d20: c0526794 c00e2d9c ef0b5d34 c02228b4 ed667240 00000001 eec24280 ed667200 [ 16.398433] 5d40: ed667270 ed66720c 00000000 ed60f380 00000003 c01ae0d8 c01acf2c ed667200 [ 16.406579] 5d60: 00000080 0b300000 00000002 ef344c00 ef343400 ef340400 ef340400 ef3406bc [ 16.414725] 5d80: c02bbd24 ef343400 ef340400 ef343588 ef0b5dd6 c02bcc28 00000056 ef34346c [ 16.422870] 5da0: 00000003 ef344c00 ef343400 c02bd858 00000003 ef0b5dd6 00000008 ed5a3708 [ 16.431015] 5dc0: c0467338 ef340698 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 16.439161] 5de0: 00000001 ef343408 c058a11c 00000000 c054840c 00000001 00000000 c05480b8 [ 16.447307] 5e00: ef013c00 c02b21a8 c02b2190 c0226358 00000000 ef343408 c0226508 ef342808 [ 16.455452] 5e20: 00000000 c0224b34 ef275698 ed7323c4 ef343408 ef34343c c0547fd8 c0226234 [ 16.463598] 5e40: ef343408 ef343408 c0547fd8 c02259a4 ef343408 00000000 ef343410 c022400c [ 16.471743] 5e60: ef013c00 c0383204 c0479d58 ef0b5e84 00061a80 ef343400 ef343408 c0479d04 [ 16.479888] 5e80: 00061a80 c03b3754 00000000 c02b25c8 c0479d04 c0451b3c c0479cc0 00000001 [ 16.488034] 5ea0: ef342800 00000000 ef342800 c02b5014 00061a80 40ff8080 00000000 ef3429ec [ ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.76 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.503662] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511505] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519409] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531341] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538635] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.550140] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558654] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570587] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577911] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589385] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.597198] HS USB OTG: no transceiver configured [ 3.601928] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609771] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617675] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629608] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.636932] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648406] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.656921] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668853] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.676177] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687652] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695465] HS USB OTG: no transceiver configured [ 3.700164] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.708038] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.715942] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.727874] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.735198] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746673] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.755218] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.767120] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774444] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785919] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793762] HS USB OTG: no transceiver configured [ 3.798461] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806304] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.814239] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.34 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

queue boot: 23 passed 5 failed (queue/v3.12.22)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : FAILED 1:36.13 bbb multi_v7_defconfig : FAILED 1:31.03 omap5uevm omap2plus_defconfig : FAILED 1:18.69 omap5uevm multi_v7_defconfig : FAILED 1:15.99 omap5uevm multi_lpae_defconfig : FAILED 1:15.92 Successful boards: arndale exynos_defconfig : passed 1:20.49 beaver tegra_defconfig : passed 1:00.54 capri bcm_defconfig : passed 0:38.06 capri multi_v7_defconfig : passed 0:40.58 cubie multi_v7_defconfig : passed 1:11.86 cubie2 multi_v7_defconfig : passed 0:57.74 cubie2 multi_lpae_defconfig : passed 1:03.23 cubox dove_defconfig : passed 1:15.40 dalmore tegra_defconfig : passed 1:25.05 dalmore multi_v7_defconfig : passed 1:02.04 dalmore multi_lpae_defconfig : passed 0:59.05 panda omap2plus_defconfig : passed 1:30.74 panda multi_v7_defconfig : passed 1:34.92 sama5 sama5_defconfig : passed 1:56.22 seaboard tegra_defconfig : passed 1:02.47 seaboard multi_v7_defconfig : passed 0:55.42 snow exynos_defconfig : passed 1:44.37 snowball u8500_defconfig : passed 2:25.05 snowball multi_v7_defconfig : passed 0:58.47 trimslice tegra_defconfig : passed 1:01.30 trimslice multi_v7_defconfig : passed 0:45.50 wandboard imx_v6_v7_defconfig : passed 1:07.62 wandboard multi_v7_defconfig : passed 0:45.75 Offline boards: beaver multi_v7_defconfig : OFFLINE 0:39.68 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.245271] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.246044] mop500-uib: failed to get adapter i2c2 [ 0.262452] NFS: Registering the id_resolver key type [ 0.262567] Key type id_resolver registered [ 0.262581] Key type id_legacy registered [ 0.262981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.263002] io scheduler noop registered [ 0.263014] io scheduler deadline registered [ 0.263258] io scheduler cfq registered (default) [ 0.264112] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.341761] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.343658] Serial: IMX driver [ 0.344621] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.936453] console [ttyO0] enabled [ 0.941264] serial: Freescale lpuart driver [ 0.946052] [drm] Initialized drm 1.1.0 20060810 [ 0.953007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.959892] ehci-platform: EHCI generic platform driver [ 0.965563] ehci-omap: OMAP-EHCI Host Controller driver [ 0.971194] ehci-orion: EHCI orion driver [ 0.975507] SPEAr-ehci: EHCI SPEAr driver [ 0.979828] tegra-ehci: Tegra EHCI driver [ 0.984435] usbcore: registered new interface driver usb-storage [ 0.992273] mousedev: PS/2 mouse device common for all mice [ 0.999464] sdhci: Secure Digital Host Controller Interface driver [ 1.006073] sdhci: Copyright(c) Pierre Ossman [ 1.011101] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.018058] usbcore: registered new interface driver usbhid [ 1.023980] usbhid: USB HID core driver [ 1.028424] TCP: cubic registered [ 1.032841] NET: Registered protocol family 10 [ 1.038576] sit: IPv6 over IPv4 tunneling driver [ 1.044575] Key type dns_resolver registered [ 1.049274] Registering SWP/SWPB emulation handler [ 1.055150] regulator-dummy: disabling [ 1.060608] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.066603] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.076698] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.837945] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.849976] of_get_named_gpio_flags exited with status 53 [ 1.855917] of_get_named_gpio_flags exited with status 54 [ 1.861677] of_get_named_gpio_flags exited with status 55 [ 1.867373] of_get_named_gpio_flags exited with status 56 [ 1.873147] of_get_named_gpio_flags exited with status 53 [ 1.881384] of_get_named_gpio_flags exited with status 54 [ 1.888112] of_get_named_gpio_flags exited with status 55 [ 1.894754] of_get_named_gpio_flags exited with status 56 [ 1.903716] ledtrig-cpu: registered to indicate activity on CPUs [ 1.912387] usbcore: registered new interface driver usbhid [ 1.918266] usbhid: USB HID core driver [ 1.924504] oprofile: no performance counters [ 1.932522] oprofile: using timer interrupt. [ 1.937947] TCP: cubic registered [ 1.941691] Initializing XFRM netlink socket [ 1.946418] NET: Registered protocol family 17 [ 1.951289] NET: Registered protocol family 15 [ 1.956492] Key type dns_resolver registered [ 1.961227] ThumbEE CPU extension supported. [ 1.965779] Registering SWP/SWPB emulation handler [ 1.975799] regulator-dummy: disabling [ 1.996545] DCDC1: at 1500 mV [ 2.003454] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.011785] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.019529] LDO1: at 1800 mV [ 2.025631] LDO2: at 3300 mV [ 2.032950] LDO3: 1800 mV [ 2.038568] LDO4: at 3300 mV [ 2.046319] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.052234] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.121115] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.127559] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.137688] libphy: 4a101000.mdio: probed [ 2.142098] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.152311] Random MACID = 96:10:e3:50:73:bc [ 2.163319] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.177353] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/multi_lpae_defconfig/zImage'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################## 556.6 KiB/s done Bytes transferred = 3585464 (36b5b8 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.22/multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.22/multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x36b5b8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/multi_v7_defconfig/zImage'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################# 555.7 KiB/s done Bytes transferred = 3570392 (367ad8 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.22/multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.22/multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x367ad8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/omap2plus_defconfig/zImage'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ######################### 628.9 KiB/s done Bytes transferred = 4173288 (3fade8 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot#tftp 0x82000000 queue/v3.12.22/omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.22/omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x3fade8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports