Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

mainline build: 44 warnings 0 failures (mainline/v3.15-rc8-7073-g9d2cd01)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 9d2cd01 Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd into next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc8-7073-g9d2cd01/ Runtime: 46m 6s Passed: 126 Failed: 0 Warnings: 44 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:420:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:539:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:539:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25614): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85dd8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85818): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 33 passed 1 failed (mainline/v3.15-rc8-105-gc593e89)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:31.26 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.66 arndale exynos_defconfig : passed 1:21.57 bbb omap2plus_defconfig : passed 1:37.49 bbb multi_v7_defconfig : passed 1:17.18 beaver tegra_defconfig : passed 1:04.34 beaver multi_v7_defconfig : passed 1:00.65 capri bcm_defconfig : passed 0:40.23 capri multi_v7_defconfig : passed 0:41.64 cubie sunxi_defconfig : passed 1:12.71 cubie multi_v7_defconfig : passed 1:37.20 cubie2 sunxi_defconfig : passed 1:17.77 cubie2 multi_v7_defconfig : passed 1:19.04 cubie2 multi_lpae_defconfig : passed 1:14.05 dalmore tegra_defconfig : passed 1:24.87 dalmore multi_v7_defconfig : passed 1:19.91 dalmore multi_lpae_defconfig : passed 1:21.38 hummingboard imx_v6_v7_defconfig : passed 1:23.09 hummingboard multi_v7_defconfig : passed 1:22.77 omap5uevm omap2plus_defconfig : passed 1:07.16 omap5uevm multi_v7_defconfig : passed 2:01.78 omap5uevm multi_lpae_defconfig : passed 1:53.30 panda omap2plus_defconfig : warnings 1:35.05 panda multi_v7_defconfig : passed 1:48.93 sama5 sama5_defconfig : passed 2:01.09 seaboard tegra_defconfig : passed 1:05.76 seaboard multi_v7_defconfig : passed 1:29.19 snow exynos_defconfig : passed 1:41.32 snowball u8500_defconfig : passed 2:18.49 snowball multi_v7_defconfig : passed 3:12.16 trimslice tegra_defconfig : passed 1:01.85 trimslice multi_v7_defconfig : passed 1:05.94 wandboard imx_v6_v7_defconfig : passed 1:15.12 wandboard multi_v7_defconfig : passed 1:10.35 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.202568] orion-ehci f1050000.usb-host: new USB bus registered, assigned bus number 1 [ 1.210743] orion-ehci f1050000.usb-host: irq 24, io mem 0xf1050000 [ 1.232740] orion-ehci f1050000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.239884] hub 1-0:1.0: USB hub found [ 1.243666] hub 1-0:1.0: 1 port detected [ 1.247984] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.253846] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.261961] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.282737] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.289794] hub 2-0:1.0: USB hub found [ 1.293583] hub 2-0:1.0: 1 port detected [ 1.297898] SPEAr-ehci: EHCI SPEAr driver [ 1.301994] tegra-ehci: Tegra EHCI driver [ 1.306572] usbcore: registered new interface driver usb-storage [ 1.313908] mousedev: PS/2 mouse device common for all mice [ 1.320646] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.329823] i2c /dev entries driver [ 1.334908] usbcore: registered new interface driver uvcvideo [ 1.340628] USB Video Class driver (1.1.1) [ 1.344737] gspca_main: v2.14.0 registered [ 1.351802] orion_wdt: Initial timeout 25 sec [ 1.356864] sdhci: Secure Digital Host Controller Interface driver [ 1.363033] sdhci: Copyright(c) Pierre Ossman [ 1.367858] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.374105] usbcore: registered new interface driver usbhid [ 1.379646] usbhid: USB HID core driver [ 1.386370] TCP: cubic registered [ 1.389673] NET: Registered protocol family 17 [ 1.394323] Key type dns_resolver registered [ 1.398744] ThumbEE CPU extension supported. [ 1.403035] Registering SWP/SWPB emulation handler [ 1.407807] PJ4 iWMMXt v2 coprocessor enabled. [ 1.413288] USB Power: 5000 mV [ 1.416775] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-07 23:37:55 UTC (1402184275) [ 1.427232] ALSA device list: [ 1.430182] No soundcards found. [ 1.434865] ata1: SATA link down (SStatus 0 SControl F300) [ 1.440433] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc8-105-gc593e89)

by Olof's autobuilder

11 years, 5 months

stable boot: 15 pass, 3 fail (v3.10.42)

by Kevin's boot bot

Tree/Branch: stable Git describe: v3.10.42 Failed boot tests (console logs at the end) =========================================== legacy,3730xm: FAIL: arm-omap2plus_defconfig omap3-beagle-xm: FAIL: arm-omap2plus_defconfig da850-evm: FAIL: arm-da8xx_omapl_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 16.5 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.4 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 1 min 5.5 sec: FAIL omap3-beagle-xm 1 min 13.0 sec: FAIL legacy,3530beagle 0 min 23.1 sec: PASS omap4-panda 0 min 54.6 sec: PASS omap3-tobi 0 min 21.8 sec: PASS am335x-bone 0 min 23.0 sec: PASS legacy,n900 0 min 16.6 sec: PASS omap4-panda-es 0 min 55.1 sec: PASS legacy,3730storm 0 min 23.5 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 14.4 sec: PASS imx6dl-wandboard,wand-solo 0 min 14.3 sec: PASS arm-exynos_defconfig -------------------- exynos5250-arndale 0 min 30.2 sec: PASS arm-da8xx_omapl_defconfig ------------------------- da850-evm 0 min 13.2 sec: FAIL legacy,da850evm 0 min 14.1 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.1 sec: PASS Console logs for failures ========================= arm-omap2plus_defconfig ----------------------- legacy,3730xm: FAIL: last 40 lines of boot log: ----------------------------------------------- TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-Oy501C/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ############## 390.6 KiB/s done Bytes transferred = 4019032 (3d5358 hex) OMAP3 beagleboard.org #tftp 0x82000000 192.168.1.2:tmp/3730xm-Oy501C/buildroot.cpio.gzf_Q9Kh.uboot tftp 0x82000000 192.168.1.2:tmp/3730xm-Oy501C/buildroot.cpio.gzf_Q9Kh.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-Oy501C/buildroot.cpio.gzf_Q9Kh.uboot'. Load address: 0x82000000 Loading: *T ############################################ 107.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk ip=::::::none:192.168.1.254 OMAP3 beagleboard.org # bootz 0x80200000 0x82000000 bootz 0x80200000 0x82000000 ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: buildroot.cpio.gz Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 65.53 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 40 lines of boot log: ------------------------------------------------- done Bytes transferred = 4019032 (3d5358 hex) OMAP3 beagleboard.org # tftp 0x82000000 192.168.1.2:buildroot.cpio.gz tftp 0x82000000 192.168.1.2:buildroot.cpio.gz Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 105.5 KiB/s done Bytes transferred = 642538 (9cdea hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-AsSrBf/tmpuN03aU.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-AsSrBf/tmpuN03aU.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-AsSrBf/tmpuN03aU.dtb'. Load address: 0x81f00000 Loading: *T # 1000 Bytes/s done Bytes transferred = 11512 (2cf8 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk ip=::::::none:192.168.1.254 OMAP3 beagleboard.org # bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fffa000, end 8ffffcf7 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 73.02 seconds. # PYBOOT: Result: FAIL arm-da8xx_omapl_defconfig ------------------------- da850-evm: FAIL: last 40 lines of boot log: ------------------------------------------- io scheduler noop registered (default) da8xx_lcdc da8xx_lcdc.0: GLCD: Found Sharp_LK043T1DG01 panel Console: switching to colour frame buffer device 60x34 Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25) is a 16550A serial8250.0: ttyS1 at MMIO 0x1d0c000 (irq = 53) is a 16550A serial8250.0: ttyS2 at MMIO 0x1d0d000 (irq = 61) is a 16550A console [ttyS2] enabled brd: module loaded davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 davinci_mdio davinci_mdio.0: detected phy mask fffffffe libphy: davinci_mdio.0: probed davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio-0:00, driver unknown input: gpio-keys-polled as /devices/platform/gpio-keys-polled.1/input/input0 i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu TCP: cubic registered NET: Registered protocol family 17 deviceless supply cvdd not found, using dummy regulator regulator-dummy: incomplete constraints, leaving on console [netcon0] enabled netconsole: network logging started davinci_emac davinci_emac.1: using random MAC addr: fe:69:af:04:3d:90 VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 Please append a correct "root=" boot option; here are the available partitions: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.42 #1 [<c000cd5c>] (unwind_backtrace+0x0/0xf0) from [<c000b694>] (show_stack+0x10/0x14) [<c000b694>] (show_stack+0x10/0x14) from [<c02a20ec>] (panic+0x8c/0x1dc) [<c02a20ec>] (panic+0x8c/0x1dc) from [<c03a5f24>] (mount_block_root+0x1a0/0x258) [<c03a5f24>] (mount_block_root+0x1a0/0x258) from [<c03a61c8>] (mount_root+0xf0/0x118) [<c03a61c8>] (mount_root+0xf0/0x118) from [<c03a6354>] (prepare_namespace+0x164/0x1c4) [<c03a6354>] (prepare_namespace+0x164/0x1c4) from [<c03a5bac>] (kernel_init_freeable+0x170/0x1b4) [<c03a5bac>] (kernel_init_freeable+0x170/0x1b4) from [<c02a0bb4>] (kernel_init+0x8/0xe4) [<c02a0bb4>] (kernel_init+0x8/0xe4) from [<c0009430>] (ret_from_fork+0x14/0x24) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 13.17 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

mainline boot: 63 pass, 1 fail (v3.15-rc8-7069-g57d3261)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc8-7069-g57d3261 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.2 sec: PASS da850-evm 0 min 14.9 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.2 sec: PASS omap5-uevm 1 min 39.3 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 12.9 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.8 sec: PASS armada-370-mirabox 0 min 21.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 36.9 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS omap3-beagle-xm 0 min 48.3 sec: PASS legacy,3530beagle 0 min 23.3 sec: PASS (Warnings: 1) omap4-panda 0 min 52.9 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.0 sec: PASS am335x-bone 0 min 24.1 sec: PASS omap3-overo-storm-tobi 0 min 21.8 sec: PASS omap5-uevm 0 min 55.1 sec: PASS (Warnings: 6) omap3-n900 0 min 17.5 sec: PASS legacy,n900 0 min 17.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.2 sec: PASS (Warnings: 1) legacy,3730storm 0 min 28.0 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS sun7i-a20-cubieboard2 0 min 12.8 sec: PASS sun4i-a10-cubieboard 0 min 20.6 sec: PASS exynos5410-smdk5410 0 min 28.8 sec: PASS am335x-bone 0 min 28.7 sec: PASS tegra124-jetson-tk1 0 min 17.9 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 52.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS ste-snowball 1 min 11.3 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 19.3 sec: PASS bcm28155-ap 0 min 27.3 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS omap3-overo-storm-tobi 0 min 23.6 sec: PASS omap3-beagle-xm 0 min 52.8 sec: PASS exynos5420-arndale-octa 0 min 39.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 30.9 sec: PASS omap5-uevm 1 min 38.0 sec: PASS (Warnings: 6) omap4-panda-es 0 min 52.2 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.4 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.6 sec: PASS sun4i-a10-cubieboard 0 min 11.3 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.4 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.0 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.7 sec: PASS exynos5250-arndale 0 min 30.1 sec: PASS exynos5410-smdk5410 0 min 27.2 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS imx6q-wandboard 0 min 14.0 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 54.9 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.7 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.4 sec: PASS Console logs for failures ========================= arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- Filename 'tmp/snowball-SJ6HaI/tmpUatTBQ-uImage'. Load address: 0x1000000 Loading: *################################################################# ###############################################################T ## ################################################################# ############################## done Bytes transferred = 3296025 (324b19 hex) U8500 $ tftp 0x03000000 192.168.1.2:buildroot.cpio.gz tftp 0x03000000 192.168.1.2:buildroot.cpio.gz smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'buildroot.cpio.gz'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642538 (9cdea hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext3 ip=::::::none:192.168.1.254 U8500 $ bootm 0x01000000 - bootm 0x01000000 - ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3295961 Bytes = 3.1 MB Load Address: 01000000 Entry Point: 01000040 XIP Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 54.86 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

next boot: 61 pass, 3 fail (next-20140606)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140606 Failed boot tests (console logs at the end) =========================================== qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.1 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS tegra30-beaver 0 min 21.8 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS omap5-uevm 1 min 41.6 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.0 sec: PASS armada-370-mirabox 0 min 20.8 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 38.4 sec: PASS am335x-boneblack 0 min 22.3 sec: PASS omap3-beagle-xm 0 min 50.2 sec: PASS legacy,3530beagle 0 min 22.7 sec: PASS (Warnings: 1) omap4-panda 0 min 47.4 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.2 sec: PASS am335x-bone 0 min 24.0 sec: PASS omap3-overo-storm-tobi 0 min 21.9 sec: PASS omap5-uevm 0 min 53.3 sec: PASS (Warnings: 1) omap3-n900 0 min 17.3 sec: PASS legacy,n900 0 min 17.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 48.9 sec: PASS (Warnings: 1) legacy,3730storm 0 min 19.6 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS am335x-boneblack 0 min 22.2 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.7 sec: PASS exynos5410-smdk5410 0 min 28.8 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.8 sec: PASS armada-370-mirabox 0 min 21.9 sec: PASS omap4-panda 0 min 54.6 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS ste-snowball 1 min 14.3 sec: PASS tegra30-beaver 0 min 20.0 sec: PASS omap3-n900 0 min 16.6 sec: PASS qcom-apq8074-dragonboard 0 min 19.2 sec: PASS bcm28155-ap 0 min 26.6 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS omap3-overo-storm-tobi 0 min 20.8 sec: PASS omap3-beagle-xm 0 min 49.3 sec: PASS exynos5420-arndale-octa 0 min 40.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 1 min 39.9 sec: PASS (Warnings: 1) omap4-panda-es 0 min 51.6 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.0 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.8 sec: PASS sun4i-a10-cubieboard 0 min 11.7 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.0 sec: FAIL arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.6 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.7 sec: FAIL exynos5250-arndale 0 min 30.3 sec: PASS exynos5410-smdk5410 0 min 27.4 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.9 sec: PASS imx6q-wandboard 0 min 14.2 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.6 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard: FAIL: last 40 lines of boot log: ---------------------------------------------------------- [ 1.423950] bfa0: c020fc90 c020fc94 60000113 ffffffff [ 1.432113] [<c06d8580>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.437152] [<c020fc94>] (arch_cpu_idle) from [<c0258b20>] (cpu_startup_entry+0x120/0x25c) [ 1.444616] [<c0258b20>] (cpu_startup_entry) from [<c091bb44>] (start_kernel+0x318/0x37c) [ 1.452686] [<c091bb44>] (start_kernel) from [<00208074>] (0x208074) [ 1.460928] CPU3: stopping [ 1.467352] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-rc8-next-20140606 #1 [ 1.469891] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.478481] [<c02122b8>] (show_stack) from [<c06d3074>] (dump_stack+0x70/0xbc) [ 1.486287] [<c06d3074>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.493315] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.500869] [<c0208588>] (gic_handle_irq) from [<c06d8580>] (__irq_svc+0x40/0x70) [ 1.508238] Exception stack(0xee099f98 to 0xee099fe0) [ 1.515790] 9f80: 00000003 c0854ae0 [ 1.520833] 9fa0: 00000048 00000000 ee098000 00000015 c09b4530 c097246c c06dc934 c09b4530 [ 1.528991] 9fc0: c09b3da0 00000000 00000020 ee099fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.537158] [<c06d8580>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.545316] [<c020fc94>] (arch_cpu_idle) from [<c0258b20>] (cpu_startup_entry+0x120/0x25c) [ 1.552779] [<c0258b20>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.560845] CPU2: stopping [ 1.567698] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.15.0-rc8-next-20140606 #1 [ 1.570325] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.578915] [<c02122b8>] (show_stack) from [<c06d3074>] (dump_stack+0x70/0xbc) [ 1.586721] [<c06d3074>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.593751] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.601303] [<c0208588>] (gic_handle_irq) from [<c06d8580>] (__irq_svc+0x40/0x70) [ 1.608672] Exception stack(0xee097f98 to 0xee097fe0) [ 1.616223] 7f80: 00000002 c0854ae0 [ 1.621266] 7fa0: 00000050 00000000 ee096000 00000015 c09b4530 c097246c c06dc934 c09b4530 [ 1.629425] 7fc0: c09b3da0 00000000 00000020 ee097fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.637592] [<c06d8580>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.645750] [<c020fc94>] (arch_cpu_idle) from [<c0258b20>] (cpu_startup_entry+0x120/0x25c) [ 1.653211] [<c0258b20>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.661283] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.661283] ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 # PYBOOT: Time: 17.00 seconds. # PYBOOT: Result: FAIL arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 16.240929] mmcblk0: p1 p2 p3 p4 [ 16.244098] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00b8088 [ 16.251636] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.256571] Modules linked in: [ 16.259609] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-rc8-next-20140606 #1 [ 16.268452] Workqueue: kmmcd mmc_rescan [ 16.272257] task: eec14000 ti: eecb4000 task.ti: eecb4000 [ 16.277635] PC is at rescan_partitions+0xb4/0x290 [ 16.282309] LR is at 0xf00b8000 [ 16.285430] pc : [<c01b0894>] lr : [<f00b8000>] psr: 20000113 [ 16.285430] sp : eecb5c80 ip : 00000000 fp : 00000000 [ 16.296866] r10: 00000000 r9 : ed14e180 r8 : eef40200 [ 16.302066] r7 : 00000000 r6 : ed424280 r5 : 00000000 r4 : 00000008 [ 16.308565] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.315066] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.322343] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.328062] Process kworker/u16:0 (pid: 6, stack limit = 0xeecb4240) [ 16.334388] Stack: (0xeecb5c80 to 0xeecb6000) [ 16.338724] 5c80: c054b3bc 00000001 eecb4000 c038aba0 00000001 c05265b8 eeec7598 c0526488 [ 16.346869] 5ca0: ed424380 eeec7468 ed424330 ed424280 00000000 eeec7468 00000000 00000000 [ 16.355014] 5cc0: 00000000 ed424280 eef40200 ed424290 00000001 00000000 00000000 c00e3e48 [ 16.363159] 5ce0: c00e2848 00000000 00000000 00000001 ed424280 00000000 eef40270 eef4020c [ 16.371304] 5d00: 00000000 eeec7380 00000003 c00e40ac c05287d4 00000001 00000003 c038c020 [ 16.379450] 5d20: c05287d4 c00e2dc0 eecb5d34 c0222ff8 eef40240 00000001 ed424280 eef40200 [ 16.387595] 5d40: eef40270 eef4020c 00000000 eeec7380 00000003 c01ae7a8 c01ad5f4 eef40200 [ 16.395741] 5d60: 00000080 0b300000 00000002 ed289400 ed28c000 ed28e800 ed28e800 ed28eabc [ 16.403886] 5d80: c02bc918 ed28c000 ed28e800 ed28c188 eecb5dd6 c02bd81c 00000056 ed28c06c [ 16.412032] 5da0: 00000003 ed289400 ed28c000 c02be44c 00000003 eecb5dd6 00000008 ed14be58 [ 16.420177] 5dc0: c0469e94 ed28ea98 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 16.428322] 5de0: 00000001 ed28c008 c058cb1c 00000000 c054b344 00000001 00000000 c054aff0 [ 16.436468] 5e00: eec13c00 c02b2d80 c02b2d68 c0226a9c 00000000 ed28c008 c0226c4c ed28b808 [ 16.444614] 5e20: 00000000 c0225278 eeed9698 ed187cc4 ed28c008 ed28c03c c054af10 c0226978 [ 16.452759] 5e40: ed28c008 ed28c008 c054af10 c02260e8 ed28c008 00000000 ed28c010 c0224750 [ 16.460905] 5e60: eec13c00 c0384b18 c047ca98 eecb5e84 00061a80 ed28c000 ed28c008 c047ca44 [ 16.469051] 5e80: 00061a80 c03b57d4 00000000 c02b31a0 c047ca44 c0454648 c047ca00 00000001 [ 16.477196] 5ea0: ed28b800 00000000 ed28b800 c02b5c08 00061a80 40ff8080 00000000 ed28b9ec [ 16.48~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.73 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ----------------------------------------------

11 years, 5 months

mainline boot: 30 passed 9 failed (mainline/v3.15-rc8-7069-g57d3261)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:24.28 cubie2 multi_v7_defconfig : FAILED 1:41.02 cubie2 multi_lpae_defconfig : FAILED 1:22.82 cubox multi_v7_defconfig : FAILED 1:30.27 omap5uevm omap2plus_defconfig : FAILED 1:48.70 omap5uevm multi_lpae_defconfig : FAILED 1:48.00 snow multi_v7_defconfig : FAILED 1:14.83 snow multi_lpae_defconfig : FAILED 1:11.64 snowball u8500_defconfig : FAILED 1:53.32 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:11.59 arndale exynos_defconfig : passed 1:13.72 arndale multi_v7_defconfig : passed 1:36.75 arndale multi_lpae_defconfig : passed 1:23.75 bbb omap2plus_defconfig : passed 1:31.94 bbb multi_v7_defconfig : passed 1:28.61 beaver tegra_defconfig : passed 0:57.59 beaver multi_v7_defconfig : passed 0:58.81 capri bcm_defconfig : passed 0:38.94 capri multi_v7_defconfig : passed 0:42.88 cubie sunxi_defconfig : passed 1:39.37 cubie multi_v7_defconfig : passed 1:23.62 dalmore tegra_defconfig : passed 1:32.02 dalmore multi_v7_defconfig : passed 1:27.35 dalmore multi_lpae_defconfig : passed 2:26.25 hummingboard imx_v6_v7_defconfig : passed 1:19.00 hummingboard multi_v7_defconfig : passed 1:09.47 jetson multi_v7_defconfig : passed 1:07.39 jetson multi_lpae_defconfig : passed 0:56.93 panda omap2plus_defconfig : warnings 1:30.66 panda multi_v7_defconfig : warnings 1:47.16 sama5 sama5_defconfig : passed 1:56.02 seaboard tegra_defconfig : passed 1:15.26 seaboard multi_v7_defconfig : passed 1:10.52 snow exynos_defconfig : passed 1:28.29 snowball multi_v7_defconfig : passed 4:41.22 trimslice tegra_defconfig : passed 1:05.98 trimslice multi_v7_defconfig : passed 1:23.17 wandboard imx_v6_v7_defconfig : passed 1:09.71 wandboard multi_v7_defconfig : passed 1:12.01 Offline boards: jetson tegra_defconfig : OFFLINE 0:42.17 omap5uevm multi_v7_defconfig : OFFLINE 2:23.24 Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.270210] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.277715] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.283606] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.292573] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.301574] scsi0 : ahci_platform [ 1.305306] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.314023] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.319672] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.327740] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.340208] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.347256] hub 1-0:1.0: USB hub found [ 1.351098] hub 1-0:1.0: 1 port detected [ 1.356169] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.361840] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.369786] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.385191] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.392201] hub 2-0:1.0: USB hub found [ 1.396034] hub 2-0:1.0: 1 port detected [ 1.401061] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.407742] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.415625] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.480032] hub 3-0:1.0: USB hub found [ 1.483869] hub 3-0:1.0: 1 port detected [ 1.488881] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.495597] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.503433] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.565016] hub 4-0:1.0: USB hub found [ 1.568853] hub 4-0:1.0: 1 port detected [ 1.573522] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.661116] No MAC Management Counters available [ 1.665890] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.672523] IP-Config: Failed to open eth0 [ 1.676646] IP-Config: No network devices available [ 1.681564] vcc3v3: disabling [ 1.684528] vcc3v0: disabling [ 1.687623] ALSA device list: [ 1.690600] No soundcards found. [ 1.694740] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.271093] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.278600] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.284485] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.293455] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.302475] scsi0 : ahci_platform [ 1.306204] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.314928] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.320573] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.328646] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.341090] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.348155] hub 1-0:1.0: USB hub found [ 1.352010] hub 1-0:1.0: 1 port detected [ 1.357083] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.362756] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.370697] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.386076] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.393102] hub 2-0:1.0: USB hub found [ 1.396940] hub 2-0:1.0: 1 port detected [ 1.401971] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.408655] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.416539] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.480976] hub 3-0:1.0: USB hub found [ 1.484829] hub 3-0:1.0: 1 port detected [ 1.489848] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.496568] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.504410] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.565915] hub 4-0:1.0: USB hub found [ 1.569756] hub 4-0:1.0: 1 port detected [ 1.574441] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:19 UTC (19) [ 1.661936] No MAC Management Counters available [ 1.666710] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.673334] IP-Config: Failed to open eth0 [ 1.677457] IP-Config: No network devices available [ 1.682369] vcc3v3: disabling [ 1.685335] vcc3v0: disabling [ 1.688432] ALSA device list: [ 1.691410] No soundcards found. [ 1.695541] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.891133] usb1-vbus: 5000 mV [ 0.894577] usb2-vbus: 5000 mV [ 0.965764] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.973249] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.979142] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.988108] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.997003] scsi0 : ahci_platform [ 1.000650] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008880] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.014475] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.022332] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045788] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052768] hub 1-0:1.0: USB hub found [ 1.056613] hub 1-0:1.0: 1 port detected [ 1.061099] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066738] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.074570] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095731] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102604] hub 2-0:1.0: USB hub found [ 1.106432] hub 2-0:1.0: 1 port detected [ 1.110861] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.117533] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.125352] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.190552] hub 3-0:1.0: USB hub found [ 1.194339] hub 3-0:1.0: 1 port detected [ 1.198847] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.205487] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.213348] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.280536] hub 4-0:1.0: USB hub found [ 1.284324] hub 4-0:1.0: 1 port detected [ 1.288707] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.375760] ata1: SATA link down (SStatus 0 SControl 300) [ 1.392078] No MAC Management Counters available [ 1.396847] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.403449] IP-Config: Failed to open eth0 [ 1.407574] IP-Config: No network devices available [ 1.412470] vcc3v3: disabling [ 1.415433] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.240632] SPEAr-ehci: EHCI SPEAr driver [ 1.244745] tegra-ehci: Tegra EHCI driver [ 1.248879] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.255060] ohci-pci: OHCI PCI platform driver [ 1.259570] ohci-platform: OHCI generic platform driver [ 1.264892] ohci-omap3: OHCI OMAP3 driver [ 1.269000] SPEAr-ohci: OHCI SPEAr driver [ 1.273742] usbcore: registered new interface driver usb-storage [ 1.281227] mousedev: PS/2 mouse device common for all mice [ 1.288217] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297553] i2c /dev entries driver [ 1.303545] usbcore: registered new interface driver uvcvideo [ 1.309302] USB Video Class driver (1.1.1) [ 1.313402] gspca_main: v2.14.0 registered [ 1.320627] orion_wdt: Initial timeout 25 sec [ 1.326086] sdhci: Secure Digital Host Controller Interface driver [ 1.332248] sdhci: Copyright(c) Pierre Ossman [ 1.337297] Synopsys Designware Multimedia Card Interface Driver [ 1.343684] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.350096] usbcore: registered new interface driver usbhid [ 1.355656] usbhid: USB HID core driver [ 1.360659] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368830] TCP: cubic registered [ 1.372175] NET: Registered protocol family 17 [ 1.376634] can: controller area network core (rev 20120528 abi 9) [ 1.382872] NET: Registered protocol family 29 [ 1.387317] can: raw protocol (rev 20120528) [ 1.391582] can: broadcast manager protocol (rev 20120528 t) [ 1.397237] can: netlink gateway (rev 20130117) max_hops=1 [ 1.403110] Key type dns_resolver registered [ 1.407582] ThumbEE CPU extension supported. [ 1.411866] Registering SWP/SWPB emulation handler [ 1.416655] PJ4 iWMMXt v2 coprocessor enabled. [ 1.422280] USB Power: 5000 mV [ 1.425854] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-07 00:41:48 UTC (1402101708) [ 1.436384] ALSA device list: [ 1.439341] No soundcards found. [ 1.443268] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.650890] can: raw protocol (rev 20120528) [ 47.650896] can: broadcast manager protocol (rev 20120528 t) [ 47.650907] can: netlink gateway (rev 20130117) max_hops=1 [ 47.651197] Key type dns_resolver registered [ 47.651295] omap_vc_init_channel: No PMIC info for vdd_core [ 47.651297] omap_vp_init: No PMIC info for vdd_core [ 47.651302] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.651304] omap_vp_init: No PMIC info for vdd_mm [ 47.651307] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.651309] omap_vp_init: No PMIC info for vdd_mpu [ 47.651611] ThumbEE CPU extension supported. [ 47.651623] Registering SWP/SWPB emulation handler [ 47.657177] palmas 0-0048: Irq flag is 0x00000000 [ 47.734552] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.741301] mmc0: new high speed MMC card at address 0001 [ 47.747201] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.752021] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.758295] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.765174] mmcblk0: unknown partition table [ 47.765181] smps123: 600 <--> 1500 mV at 1060 mV [ 47.775562] mmcblk0boot1: unknown partition table [ 47.780807] smps45: 600 <--> 1310 mV at 1030 mV [ 47.781352] mmcblk0boot0: unknown partition table [ 47.792228] smps6: 1200 mV [ 47.796195] smps7: 1800 mV [ 47.800300] smps8: 600 <--> 1310 mV at 1040 mV [ 47.806024] smps9: failed to get the current voltage [ 47.811278] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.823330] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.951470] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.096482] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.102573] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.110002] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.116860] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.124555] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.137989] ALSA device list: [ 48.141084] No soundcards found. [ 48.145086] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.630501] Key type dns_resolver registered [ 2.630601] omap_vc_init_channel: No PMIC info for vdd_core [ 2.630605] omap_vp_init: No PMIC info for vdd_core [ 2.630614] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.630617] omap_vp_init: No PMIC info for vdd_mm [ 2.630627] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.630629] omap_vp_init: No PMIC info for vdd_mpu [ 2.631172] ThumbEE CPU extension supported. [ 2.631193] Registering SWP/SWPB emulation handler [ 2.631202] SmartReflex Class3 initialized [ 2.650739] palmas 0-0048: Irq flag is 0x00000000 [ 2.712934] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.713322] mmc0: new high speed MMC card at address 0001 [ 2.719414] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.719650] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.719867] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.722634] mmcblk0: unknown partition table [ 2.724618] mmcblk0boot1: unknown partition table [ 2.726452] mmcblk0boot0: unknown partition table [ 2.802852] smps123: 600 <--> 1500 mV at 1060 mV [ 2.809805] smps45: 600 <--> 1310 mV at 1030 mV [ 2.817345] smps6: 1200 mV [ 2.822074] smps7: 1800 mV [ 2.826989] smps8: 600 <--> 1310 mV at 1040 mV [ 2.833411] smps9: failed to get the current voltage [ 2.839344] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.853644] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.862474] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.869643] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.875694] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.884828] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.894201] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.901148] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.909744] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.918380] sr_init: No PMIC hook to init smartreflex [ 2.923866] sr_init: platform driver register failed for SR [ 2.952020] pbias_mmc_omap5: disabling [ 2.957501] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2920.609700] io scheduler cfq registered (default) [ 2920.612411] backlight supply power not found, using dummy regulator [ 2920.612458] pwm-backlight backlight: unable to request PWM, trying legacy API [ 2920.612464] pwm-backlight backlight: unable to request legacy PWM [ 2920.612501] platform backlight: Driver pwm-backlight requests probe deferral [ 2920.612694] simple-framebuffer bfc00000.framebuffer: framebuffer at 0xbfc00000, 0x202000 bytes, mapped to 0xf0400000 [ 2920.612700] simple-framebuffer bfc00000.framebuffer: format=r5g6b5, mode=1366x768x16, linelength=2732 [ 2920.615483] Console: switching to colour frame buffer device 170x48 [ 2920.618042] simple-framebuffer bfc00000.framebuffer: fb0: simplefb registered! [ 2920.619844] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 2920.619852] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2920.621155] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 2920.621161] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2920.621539] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 2920.621546] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 2920.621923] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-2364208 [ 2920.621929] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 2920.650110] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2920.651008] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 2920.651196] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 2920.651361] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 2920.651519] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 2921.456102] console [ttySAC3] enabled [ 2921.460026] Serial: IMX driver [ 2921.462969] msm_serial: driver initialized [ 2921.467098] STMicroelectronics ASC driver initialized [ 2921.472289] serial: Freescale lpuart driver [ 2921.476155] [drm] Initialized drm 1.1.0 20060810 [ 2921.483074] loop: module loaded [ 2921.486577] CAN device driver interface [ 2921.489916] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2921.496343] usbcore: registered new interface driver pegasus [ 2921.501990] usbcore: registered new interface driver asix [ 2921.507361] usbcore: registered new interface driver ax88179_178a [ 2921.513437] usbcore: registered new interface driver cdc_ether [ 2921.519266] usbcore: registered new interface driver smsc75xx [ 2921.524990] usbcore: registered new interface driver smsc95xx [ 2921.530712] usbcore: registered new interface driver net1080 [ 2921.536352] usbcore: registered new int~$off # PYBOOT: Exception: timeout Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.772418] pid_max: default: 32768 minimum: 301 [ 2889.772478] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.772484] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.772756] CPU: Testing write buffer coherency: ok [ 2889.772868] CPU0: update cpu_power 1024 [ 2889.772874] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.772971] Setting up static identity map for 0x40814838 - 0x408148d0 [ 2889.774054] CPU1: Booted secondary processor [ 2889.774085] CPU1: update cpu_power 1024 [ 2889.774088] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.774166] Brought up 2 CPUs [ 2889.774174] SMP: Total of 2 processors activated. [ 2889.774178] CPU: All CPU(s) started in HYP mode. [ 2889.774182] CPU: Virtualization extensions available. [ 2889.774423] devtmpfs: initialized [ 2889.776284] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.776464] pinctrl core: initialized pinctrl subsystem [ 2889.776662] regulator-dummy: no parameters [ 2889.782510] NET: Registered protocol family 16 [ 2889.783382] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.784096] cpuidle: using governor ladder [ 2889.784105] cpuidle: using governor menu [ 2889.789094] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.792891] No ATAGs? [ 2889.792910] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.792915] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.793010] EXYNOS5250 PMU Initialize [ 2889.794203] Serial: AMBA PL011 UART driver [ 2920.594304] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594316] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594602] vbat-supply: no parameters [ 2920.594738] P5.0V_USB3CON: 5000 mV [ 2920.595857] vgaarb: loaded [ 2920.596147] SCSI subsystem initialized [ 2920.596228] libata version 3.00 loaded. [ 2920.596378] usbcore: registered new interface driver usbfs [ 2920.596408] usbcore: registered new interface driver hub [ 2920.596459] usbcore: registered new device driver usb [ 2920.596870] Linux video ca~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.539123] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.551055] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.558349] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569824] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.578430] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.590332] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597656] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.609130] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616943] HS USB OTG: no transceiver configured [ 3.621673] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629516] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637451] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.649383] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656707] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.668182] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676757] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688690] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.696014] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707489] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.715301] HS USB OTG: no transceiver configured [ 3.720001] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727874] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735809] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747741] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.755035] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766540] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.775115] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.787048] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.794372] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805847] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813659] HS USB OTG: no transceiver configured [ 3.818359] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.826202] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.834167] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.846069] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.853393] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864868] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873474] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline boot: 55 pass, 1 fail (v3.15-rc8-88-gd4c5491)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc8-88-gd4c5491 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 15.4 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.2 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.8 sec: PASS omap5-uevm 1 min 43.7 sec: PASS sun7i-a20-cubieboard2 0 min 12.2 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.1 sec: PASS armada-370-mirabox 1 min 48.5 sec: FAIL arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.4 sec: PASS am335x-boneblack 0 min 22.3 sec: PASS omap3-beagle-xm 0 min 46.2 sec: PASS legacy,3530beagle 0 min 24.9 sec: PASS (Warnings: 1) omap4-panda 0 min 52.4 sec: PASS omap3-overo-tobi 0 min 25.0 sec: PASS (Warnings: 1) am335x-bone 0 min 24.3 sec: PASS omap3-overo-storm-tobi 0 min 21.8 sec: PASS omap5-uevm 0 min 58.9 sec: PASS omap3-n900 0 min 17.7 sec: PASS (Warnings: 1) legacy,n900 0 min 17.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 53.7 sec: PASS legacy,3730storm 0 min 20.3 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 19.4 sec: PASS ste-snowball 1 min 13.8 sec: PASS tegra30-beaver 0 min 20.9 sec: PASS am335x-boneblack 0 min 21.7 sec: PASS omap3-beagle-xm 0 min 50.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.0 sec: PASS armada-370-mirabox 0 min 21.6 sec: PASS omap4-panda 0 min 55.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.8 sec: PASS sun4i-a10-cubieboard 0 min 17.1 sec: PASS bcm28155-ap 0 min 26.1 sec: PASS omap3-overo-tobi 0 min 24.8 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 15.2 sec: PASS am335x-bone 0 min 23.4 sec: PASS omap3-overo-storm-tobi 0 min 23.7 sec: PASS omap5-uevm 1 min 38.8 sec: PASS omap3-n900 0 min 16.4 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS omap4-panda-es 0 min 48.5 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.0 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.2 sec: PASS sun4i-a10-cubieboard 0 min 10.5 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.6 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.6 sec: PASS exynos5250-arndale 0 min 30.9 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS imx6q-wandboard 0 min 14.4 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 24.7 sec: PASS arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.4 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.0 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.2 sec: PASS Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! pxa3xx-nand d00d0000.nand: Wait time out!!! ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 108.49 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

mainline build: 44 warnings 0 failures (mainline/v3.15-rc8-7069-g57d3261)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 57d3261 Merge branch 'akpm' (patches from Andrew Morton) into next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc8-7069-g57d3261/ Runtime: 46m 0s Passed: 126 Failed: 0 Warnings: 44 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:420:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:539:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:539:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25614): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85dd8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85818): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 33 passed 1 failed (mainline/v3.15-rc8-88-gd4c5491)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:29.31 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.64 arndale exynos_defconfig : passed 1:15.14 bbb omap2plus_defconfig : passed 1:32.77 bbb multi_v7_defconfig : passed 1:20.17 beaver tegra_defconfig : passed 0:57.41 beaver multi_v7_defconfig : passed 1:14.51 capri bcm_defconfig : passed 0:39.98 capri multi_v7_defconfig : passed 0:41.27 cubie sunxi_defconfig : passed 1:06.83 cubie multi_v7_defconfig : passed 1:08.44 cubie2 sunxi_defconfig : passed 1:09.15 cubie2 multi_v7_defconfig : passed 1:35.28 cubie2 multi_lpae_defconfig : passed 1:22.75 dalmore tegra_defconfig : passed 1:25.56 dalmore multi_v7_defconfig : passed 1:19.99 dalmore multi_lpae_defconfig : passed 1:22.50 hummingboard imx_v6_v7_defconfig : passed 1:38.03 hummingboard multi_v7_defconfig : passed 1:09.72 omap5uevm omap2plus_defconfig : passed 1:03.67 omap5uevm multi_v7_defconfig : passed 1:57.22 omap5uevm multi_lpae_defconfig : passed 1:54.12 panda omap2plus_defconfig : warnings 1:40.55 panda multi_v7_defconfig : passed 1:58.21 sama5 sama5_defconfig : passed 1:56.86 seaboard tegra_defconfig : passed 1:01.25 seaboard multi_v7_defconfig : passed 1:16.31 snow exynos_defconfig : passed 1:36.71 snowball u8500_defconfig : passed 3:16.12 snowball multi_v7_defconfig : passed 3:46.45 trimslice tegra_defconfig : passed 1:00.71 trimslice multi_v7_defconfig : passed 1:16.76 wandboard imx_v6_v7_defconfig : passed 1:07.47 wandboard multi_v7_defconfig : passed 1:07.70 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.202512] orion-ehci f1050000.usb-host: new USB bus registered, assigned bus number 1 [ 1.210688] orion-ehci f1050000.usb-host: irq 24, io mem 0xf1050000 [ 1.232735] orion-ehci f1050000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.239875] hub 1-0:1.0: USB hub found [ 1.243662] hub 1-0:1.0: 1 port detected [ 1.247979] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.253844] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.261959] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.282731] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.289792] hub 2-0:1.0: USB hub found [ 1.293581] hub 2-0:1.0: 1 port detected [ 1.297902] SPEAr-ehci: EHCI SPEAr driver [ 1.301999] tegra-ehci: Tegra EHCI driver [ 1.306582] usbcore: registered new interface driver usb-storage [ 1.313929] mousedev: PS/2 mouse device common for all mice [ 1.320667] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.329845] i2c /dev entries driver [ 1.334934] usbcore: registered new interface driver uvcvideo [ 1.340651] USB Video Class driver (1.1.1) [ 1.344758] gspca_main: v2.14.0 registered [ 1.351752] orion_wdt: Initial timeout 25 sec [ 1.356817] sdhci: Secure Digital Host Controller Interface driver [ 1.362985] sdhci: Copyright(c) Pierre Ossman [ 1.367810] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.374056] usbcore: registered new interface driver usbhid [ 1.379599] usbhid: USB HID core driver [ 1.386318] TCP: cubic registered [ 1.389617] NET: Registered protocol family 17 [ 1.394261] Key type dns_resolver registered [ 1.398688] ThumbEE CPU extension supported. [ 1.402979] Registering SWP/SWPB emulation handler [ 1.407751] PJ4 iWMMXt v2 coprocessor enabled. [ 1.413233] USB Power: 5000 mV [ 1.416719] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-06 21:36:58 UTC (1402090618) [ 1.427175] ALSA device list: [ 1.430126] No soundcards found. [ 1.434864] ata1: SATA link down (SStatus 0 SControl F300) [ 1.440429] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports