Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

mainline build: 7 warnings 0 failures (mainline/v3.15-rc8-87-gd54d14b)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: d54d14b Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc8-87-gd54d14b/ Runtime: 41m 36s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

11 years, 5 months

mainline boot: 33 passed 1 failed (mainline/v3.15-rc8-82-g624483f)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:29.36 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:06.99 arndale exynos_defconfig : passed 1:15.08 bbb omap2plus_defconfig : passed 1:34.83 bbb multi_v7_defconfig : passed 1:19.24 beaver tegra_defconfig : passed 1:06.46 beaver multi_v7_defconfig : passed 0:59.15 capri bcm_defconfig : passed 0:42.68 capri multi_v7_defconfig : passed 0:41.22 cubie sunxi_defconfig : passed 1:16.66 cubie multi_v7_defconfig : passed 1:23.50 cubie2 sunxi_defconfig : passed 1:12.18 cubie2 multi_v7_defconfig : passed 1:33.10 cubie2 multi_lpae_defconfig : passed 1:20.51 dalmore tegra_defconfig : passed 1:21.25 dalmore multi_v7_defconfig : passed 1:28.26 dalmore multi_lpae_defconfig : passed 1:22.30 hummingboard imx_v6_v7_defconfig : passed 1:30.03 hummingboard multi_v7_defconfig : passed 1:08.31 omap5uevm omap2plus_defconfig : passed 1:07.32 omap5uevm multi_v7_defconfig : passed 1:58.76 omap5uevm multi_lpae_defconfig : passed 1:51.84 panda omap2plus_defconfig : warnings 1:37.18 panda multi_v7_defconfig : passed 1:45.55 sama5 sama5_defconfig : passed 1:53.59 seaboard tegra_defconfig : passed 1:06.81 seaboard multi_v7_defconfig : passed 1:17.03 snow exynos_defconfig : passed 1:36.38 snowball u8500_defconfig : passed 2:10.95 snowball multi_v7_defconfig : passed 2:51.47 trimslice tegra_defconfig : passed 1:13.72 trimslice multi_v7_defconfig : passed 1:07.14 wandboard imx_v6_v7_defconfig : passed 1:17.30 wandboard multi_v7_defconfig : passed 1:12.57 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.202414] orion-ehci f1050000.usb-host: new USB bus registered, assigned bus number 1 [ 1.210588] orion-ehci f1050000.usb-host: irq 24, io mem 0xf1050000 [ 1.232701] orion-ehci f1050000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.239841] hub 1-0:1.0: USB hub found [ 1.243625] hub 1-0:1.0: 1 port detected [ 1.247943] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.253806] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.261921] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.282698] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.289759] hub 2-0:1.0: USB hub found [ 1.293552] hub 2-0:1.0: 1 port detected [ 1.297872] SPEAr-ehci: EHCI SPEAr driver [ 1.301969] tegra-ehci: Tegra EHCI driver [ 1.306549] usbcore: registered new interface driver usb-storage [ 1.313887] mousedev: PS/2 mouse device common for all mice [ 1.320621] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.329798] i2c /dev entries driver [ 1.334882] usbcore: registered new interface driver uvcvideo [ 1.340604] USB Video Class driver (1.1.1) [ 1.344712] gspca_main: v2.14.0 registered [ 1.351674] orion_wdt: Initial timeout 25 sec [ 1.356736] sdhci: Secure Digital Host Controller Interface driver [ 1.362904] sdhci: Copyright(c) Pierre Ossman [ 1.367720] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.373967] usbcore: registered new interface driver usbhid [ 1.379510] usbhid: USB HID core driver [ 1.386231] TCP: cubic registered [ 1.389537] NET: Registered protocol family 17 [ 1.394181] Key type dns_resolver registered [ 1.398608] ThumbEE CPU extension supported. [ 1.402897] Registering SWP/SWPB emulation handler [ 1.407662] PJ4 iWMMXt v2 coprocessor enabled. [ 1.413161] USB Power: 5000 mV [ 1.416649] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-06 17:32:42 UTC (1402075962) [ 1.427103] ALSA device list: [ 1.430055] No soundcards found. [ 1.434827] ata1: SATA link down (SStatus 0 SControl F300) [ 1.440389] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc8-82-g624483f)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 624483f mm: rmap: fix use-after-free in __put_anon_vma Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc8-82-g624483f/ Runtime: 43m 39s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

11 years, 5 months

next boot: 35 passed 6 failed (next/next-20140606)

by Olof's autobooter

Failed boards: apc vt8500_v6_v7_defconfig : FAILED 0:37.36 snow multi_v7_defconfig : FAILED 1:11.74 snow multi_lpae_defconfig : FAILED 1:11.79 snowball u8500_defconfig : FAILED 1:47.21 trimslice tegra_defconfig : FAILED 0:34.23 trimslice multi_v7_defconfig : FAILED 0:53.72 Successful boards: arndale exynos_defconfig : passed 1:16.16 arndale multi_v7_defconfig : passed 1:37.32 arndale multi_lpae_defconfig : passed 1:24.14 bbb omap2plus_defconfig : passed 1:32.52 bbb multi_v7_defconfig : passed 1:28.14 beaver tegra_defconfig : passed 1:00.44 beaver multi_v7_defconfig : passed 1:05.64 capri bcm_defconfig : passed 0:40.30 capri multi_v7_defconfig : passed 0:40.21 cubie sunxi_defconfig : passed 1:08.76 cubie multi_v7_defconfig : passed 1:28.67 cubie2 sunxi_defconfig : passed 1:11.90 cubie2 multi_v7_defconfig : passed 1:47.88 cubie2 multi_lpae_defconfig : passed 1:26.08 cubox multi_v7_defconfig : passed 1:08.42 dalmore tegra_defconfig : passed 1:30.62 dalmore multi_v7_defconfig : passed 1:16.88 dalmore multi_lpae_defconfig : passed 1:25.42 hummingboard imx_v6_v7_defconfig : passed 1:29.14 hummingboard multi_v7_defconfig : passed 1:13.15 jetson tegra_defconfig : passed 1:07.26 jetson multi_v7_defconfig : passed 1:00.14 jetson multi_lpae_defconfig : passed 0:55.80 omap5uevm omap2plus_defconfig : warnings 1:04.39 omap5uevm multi_v7_defconfig : warnings 1:55.09 omap5uevm multi_lpae_defconfig : warnings 1:55.20 panda omap2plus_defconfig : warnings 1:29.71 panda multi_v7_defconfig : warnings 1:42.68 sama5 sama5_defconfig : warnings 1:57.59 seaboard tegra_defconfig : passed 1:01.82 seaboard multi_v7_defconfig : passed 1:07.46 snow exynos_defconfig : passed 1:18.18 snowball multi_v7_defconfig : passed 4:03.21 wandboard imx_v6_v7_defconfig : passed 1:01.73 wandboard multi_v7_defconfig : passed 1:03.79 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board apc-vt8500_v6_v7_defconfig failure log: ------------------------------------------------- [ 0.870000] sit: IPv6 over IPv4 tunneling driver [ 0.870000] Key type dns_resolver registered [ 0.880000] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 [ 0.880000] vt8500-rtc d8100000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (9466[ 0.890000] Waiting for root device /dev/sda1... [ 1.040000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.190000] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1.200000] scsi0 : usb-storage 1-1:1.0 [ 2.240000] scsi scan: INQUIRY result too short (5), using 36 [ 2.240000] scsi 0:0:0:0: Direct-Access PQ: 0 ANSI: 0 [ 4.450000] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.450000] sd 0:0:0:0: [sda] 1 512-byte logical blocks: (512 B/512 B) [ 4.460000] sd 0:0:0:0: [sda] 0-byte physical blocks [ 4.470000] sd 0:0:0:0: [sda] Write Protect is off [ 4.470000] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 4.480000] sd 0:0:0:0: [sda] Asking for cache data failed [ 4.490000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.490000] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.540000] sda: sda1 [ 4.540000] sda: p1 start 2048 is beyond EOD, enabling native capacity [ 4.550000] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.560000] sda: sda1 [ 4.570000] sda: p1 start 2048 is beyond EOD, truncated [ 4.570000] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.590000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.590000] VFS: Cannot open root device "sda1" or unknown-block(8,1): error -6 [ 4.600000] Please append a correct "root=" boot option; here are the available partitions: [ 4.600000] 0800 0 sda driver: sd [ 4.610000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) [ 4.610000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc8-next-20140606 #1 [ 4.610000] [<c001243c>] (unwind_backtrace) from [<c0010cc4>] (show_stack+0x10/0x14) [ 4.610000] [<c0010cc4>] (show_stack) from [<c035cfec>] (panic+0x7c/0x1d8) [ 4.610000] [<c035cfec>] (panic) from [<c042d1f0>] (mount_block_root+0x188/0x22c) [ 4.610000] [<c042d1f0>] (mount_block_root) from [<c042d378>] (mount_root+0xe4/0x10c) [ 4.610000] [<c042d378>] (mount_root) from [<c042d4d0>] (prepare_namespace+0x130/0x190) [ 4.610000] [<c042d4d0>] (prepare_namespace) from [<c042ce8c>] (kernel_init_freeable+0x174/0x1b8) [ 4.610000] [<c042ce8c>] (kernel_init_freeable) from [<c035c960>] (kernel_init+0x8/0xec) [ 4.610000] [<c035c960>] (kernel_init) from [<c000e158>] (ret_from_fork+0x14/0x3c) [ 4.610000] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) ~$off # PYBOOT: Exception: panic Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2920.596874] Linux video capture interface: v2.00 [ 2920.596899] pps_core: LinuxPPS API ver. 1 registered [ 2920.596903] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596918] PTP clock support registered [ 2920.596957] EDAC MC: Ver: 3.0.0 [ 2920.597315] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597766] Switched to clocksource arch_sys_counter [ 2920.602043] NET: Registered protocol family 2 [ 2920.602292] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602329] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602403] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602430] TCP: reno registered [ 2920.602436] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602454] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602536] NET: Registered protocol family 1 [ 2920.602670] RPC: Registered named UNIX socket transport module. [ 2920.602675] RPC: Registered udp transport module. [ 2920.602679] RPC: Registered tcp transport module. [ 2920.602682] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2920.602693] PCI: CLS 0 bytes, default 64 [ 2920.603043] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 2920.603704] futex hash table entries: 512 (order: 3, 32768 bytes) [ 2920.609162] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2920.609517] NFS: Registering the id_resolver key type [ 2920.609534] Key type id_resolver registered [ 2920.609539] Key type id_legacy registered [ 2920.609567] msgmni has been set to 1464 [ 2920.609785] bounce: pool size: 64 pages [ 2920.609881] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2920.609889] io scheduler noop registered [ 2920.609895] io scheduler deadline registered [ 2920.609978] io scheduler cfq registered (default) [ 2920.612649] backlight supply power not found, using dummy regulator [ 2920.612702] pwm-backlight backlight: unable to request PWM, trying legacy API [ 2920.612708] pwm-backlight backlight: unable to request legacy PWM [ 2920.612746] platform backlight: Driver pwm-backlight requests probe deferral [ 2920.612934] simple-framebuffer bfc00000.framebuffer: framebuffer at 0xbfc00000, 0x202000 bytes, mapped to 0xf0400000 [ 2920.612941] simple-framebuffer bfc00000.framebuffer: format=r5g6b5, mode=1366x768x16, linelength=2732 [ 2920.615722] Console: switching~$off # PYBOOT: Exception: timeout Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2920.595868] vgaarb: loaded [ 2920.596153] SCSI subsystem initialized [ 2920.596232] libata version 3.00 loaded. [ 2920.596379] usbcore: registered new interface driver usbfs [ 2920.596409] usbcore: registered new interface driver hub [ 2920.596459] usbcore: registered new device driver usb [ 2920.596885] Linux video capture interface: v2.00 [ 2920.596907] pps_core: LinuxPPS API ver. 1 registered [ 2920.596911] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596927] PTP clock support registered [ 2920.596964] EDAC MC: Ver: 3.0.0 [ 2920.597314] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597774] Switched to clocksource arch_sys_counter [ 2920.602073] NET: Registered protocol family 2 [ 2920.602319] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602357] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602430] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602460] TCP: reno registered [ 2920.602467] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602484] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602566] NET: Registered protocol family 1 [ 2920.602738] RPC: Registered named UNIX socket transport module. [ 2920.602743] RPC: Registered udp transport module. [ 2920.602747] RPC: Registered tcp transport module. [ 2920.602751] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2920.602763] PCI: CLS 0 bytes, default 64 [ 2920.603106] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 2920.603760] futex hash table entries: 512 (order: 3, 32768 bytes) [ 2920.609092] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2920.609462] NFS: Registering the id_resolver key type [ 2920.609480] Key type id_resolver registered [ 2920.609484] Key type id_legacy registered [ 2920.609508] msgmni has been set to 1464 [ 2920.609723] bounce: pool size: 64 pages [ 2920.609822] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2920.609830] io scheduler noop registered [ 2920.609836] io scheduler deadline registered [ 2920.609920] io scheduler cfq registered (default) [ 2920.612612] backlight supply power not found, using dummy ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.736297] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.744232] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.756164] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.763458] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774963] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.783477] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.795410] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802734] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.814208] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.822021] HS USB OTG: no transceiver configured [ 3.826721] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.834564] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.842498] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.854431] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.861755] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.873229] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881744] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.893676] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.901000] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.912475] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.920288] HS USB OTG: no transceiver configured [ 3.925018] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932861] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940795] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.952728] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.960021] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.971496] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.980010] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.980041] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.980041] musb-hdrc musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.980102] HS USB OTG: no transceiver configured [ 3.980133] musb-hdrc musb-hdrc.26.auto: musb_init_controller failed with status -517 [ 3.980133] platform musb-hdrc.26.auto: Driver musb-hdrc requests probe deferral [ 3.980651] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.26.auto [ 3.980682] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.980682] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.980682] musb-ux500 musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.980712] Unable to handle kernel paging request at virtual address ffff20c8 ~$off # PYBOOT: Exception: timeout Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 4.564119] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.573934] sda: sda1 [ 4.576412] sda: p1 start 62 is beyond EOD, enabling native capacity [ 4.584602] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.594273] sda: sda1 [ 4.596768] sda: p1 start 62 is beyond EOD, truncated [ 4.604603] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.613229] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.618271] VFS: Cannot open root device "sda1" or unknown-block(8,1): error -6 [ 4.625694] Please append a correct "root=" boot option; here are the available partitions: [ 4.634155] 0800 0 sda driver: sd [ 4.638874] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) [ 4.647159] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc8-next-20140606 #1 [ 4.654721] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 4.662502] [<c0211c68>] (show_stack) from [<c0817cac>] (dump_stack+0x88/0x98) [ 4.669771] [<c0817cac>] (dump_stack) from [<c0814afc>] (panic+0xa0/0x218) [ 4.676691] [<c0814afc>] (panic) from [<c0ae10b0>] (mount_block_root+0x1a0/0x230) [ 4.684202] [<c0ae10b0>] (mount_block_root) from [<c0ae1248>] (mount_root+0x108/0x110) [ 4.692144] [<c0ae1248>] (mount_root) from [<c0ae13a8>] (prepare_namespace+0x158/0x1a0) [ 4.700177] [<c0ae13a8>] (prepare_namespace) from [<c0ae0d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 4.709076] [<c0ae0d6c>] (kernel_init_freeable) from [<c0812dd4>] (kernel_init+0x8/0xf0) [ 4.717196] [<c0812dd4>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 4.724780] CPU1: stopping [ 4.727520] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc8-next-20140606 #1 [ 4.735064] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 4.742843] [<c0211c68>] (show_stack) from [<c0817cac>] (dump_stack+0x88/0x98) [ 4.750091] [<c0817cac>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 4.757511] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 4.765099] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 4.772586] Exception stack(0xea087f68 to 0xea087fb0) [ 4.777658] 7f60: 00000000 c0bc9f8c c0bc9f8c 0000004c 195600d0 00000001 [ 4.785853] 7f80: 199c1e08 00000001 eafbada8 ea086000 00000000 c0825054 00000015 ea087fb0 [ 4.794036] 7fa0: c06b43dc c06b43e8 60000113 ffffffff [ 4.799130] [<c02127c0>] (__irq_svc) from [<c06b43e8>] (cpuidle_enter_state+0x68/0x100) [ 4.807177] [<c06b43e8>] (cpuidle_enter_state) from [<c027f25c>] (cpu_startup_entry+0x1ec/0x210) [ 4.815984] [<c027f25c>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 4.822777] drm_kms_helper: panic occurred, switching back to text console [ 4.829722] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) ~$off # PYBOOT: Exception: panic Board trimslice-tegra_defconfig failure log: ------------------------------------------------- [ 4.885651] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.896463] sda: sda1 [ 4.899089] sda: p1 start 62 is beyond EOD, enabling native capacity [ 4.907629] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.917807] sda: sda1 [ 4.920394] sda: p1 start 62 is beyond EOD, truncated [ 4.930267] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.939399] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.945175] VFS: Cannot open root device "sda1" or unknown-block(8,1): error -6 [ 4.952568] Please append a correct "root=" boot option; here are the available partitions: [ 4.960995] 0800 0 sda driver: sd [ 4.965657] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) [ 4.973926] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc8-next-20140606 #1 [ 4.981462] [<c0015ef4>] (unwind_backtrace) from [<c0011a38>] (show_stack+0x10/0x14) [ 4.989222] [<c0011a38>] (show_stack) from [<c05cab34>] (dump_stack+0xa0/0xd8) [ 4.996466] [<c05cab34>] (dump_stack) from [<c05c8088>] (panic+0xa0/0x210) [ 5.003369] [<c05c8088>] (panic) from [<c07ff0c0>] (mount_block_root+0x1a0/0x230) [ 5.010866] [<c07ff0c0>] (mount_block_root) from [<c07ff258>] (mount_root+0x108/0x110) [ 5.018793] [<c07ff258>] (mount_root) from [<c07ff3b8>] (prepare_namespace+0x158/0x1a0) [ 5.026808] [<c07ff3b8>] (prepare_namespace) from [<c07fed7c>] (kernel_init_freeable+0x1c8/0x1d8) [ 5.035688] [<c07fed7c>] (kernel_init_freeable) from [<c05c6374>] (kernel_init+0x8/0xf0) [ 5.043789] [<c05c6374>] (kernel_init) from [<c000e778>] (ret_from_fork+0x14/0x3c) [ 5.051365] CPU1: stopping [ 5.054090] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc8-next-20140606 #1 [ 5.061607] [<c0015ef4>] (unwind_backtrace) from [<c0011a38>] (show_stack+0x10/0x14) [ 5.069364] [<c0011a38>] (show_stack) from [<c05cab34>] (dump_stack+0xa0/0xd8) [ 5.076594] [<c05cab34>] (dump_stack) from [<c00146f8>] (handle_IPI+0x148/0x15c) [ 5.083997] [<c00146f8>] (handle_IPI) from [<c0008764>] (gic_handle_irq+0x58/0x5c) [ 5.091577] [<c0008764>] (gic_handle_irq) from [<c00125c0>] (__irq_svc+0x40/0x70) [ 5.099052] Exception stack(0xea879f68 to 0xea879fb0) [ 5.104111] 9f60: 00000000 c0850590 c0850590 0000004c 2c69c6e8 00000001 [ 5.112291] 9f80: 2c9aa6a0 00000001 eafb9e88 ea878000 00000000 c05d522c 00000015 ea879fb0 [ 5.120463] 9fa0: c03d2470 c03d247c 60000113 ffffffff [ 5.125544] [<c00125c0>] (__irq_svc) from [<c03d247c>] (cpuidle_enter_state+0x68/0x100) [ 5.133574] [<c03d247c>] (cpuidle_enter_state) from [<c005d8a8>] (cpu_startup_entry+0x1ec/0x210) [ 5.142366] [<c005d8a8>] (cpu_startup_entry) from [<00008804>] (0x8804) [ 5.148978] drm_kms_helper: panic occurred, switching back to text console [ 5.155903] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) ~$off # PYBOOT: Exception: panic

11 years, 5 months

next build: 466 warnings 0 failures (next/next-20140606)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: db206f3 Add linux-next specific files for 20140606 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140606/ Runtime: 42m 57s Passed: 126 Failed: 0 Warnings: 466 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 include/linux/of.h:772:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 22 include/linux/ftrace.h:623:60: warning: unsupported argument to '__builtin_return_address' [enabled by default] 97 include/linux/bitops.h:48) [-Wdeprecated-declarations] 100 include/linux/bitops.h:40) [-Wdeprecated-declarations] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4ae8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x3640): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x257c8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3df30): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x75c0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x86070): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3deac): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x757c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85aec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x727c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x36c8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d93c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

mainline boot: 61 pass, 3 fail (v3.15-rc8-6620-g2b03adc)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc8-6620-g2b03adc Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 18.3 sec: PASS da850-evm 0 min 15.5 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.3 sec: PASS tegra30-beaver 0 min 25.9 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.9 sec: PASS omap5-uevm 1 min 43.2 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 12.9 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 21.2 sec: FAIL armada-370-mirabox 0 min 21.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.4 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS omap3-beagle-xm 0 min 50.0 sec: PASS legacy,3530beagle 0 min 23.4 sec: PASS (Warnings: 1) omap4-panda 0 min 48.3 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 26.3 sec: PASS am335x-bone 0 min 24.1 sec: PASS omap3-overo-storm-tobi 0 min 24.9 sec: PASS omap5-uevm 1 min 0.1 sec: PASS (Warnings: 6) omap3-n900 0 min 17.5 sec: PASS legacy,n900 0 min 17.7 sec: PASS (Warnings: 1) omap4-panda-es 0 min 48.5 sec: PASS (Warnings: 1) legacy,3730storm 0 min 20.1 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.3 sec: PASS am335x-boneblack 0 min 22.0 sec: PASS sun7i-a20-cubieboard2 0 min 13.0 sec: PASS sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 28.9 sec: PASS am335x-bone 0 min 24.1 sec: PASS tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 56.7 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS ste-snowball 1 min 14.5 sec: PASS tegra30-beaver 0 min 26.0 sec: PASS omap3-n900 0 min 16.6 sec: PASS qcom-apq8074-dragonboard 0 min 19.7 sec: PASS bcm28155-ap 0 min 26.7 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS omap3-overo-storm-tobi 0 min 24.3 sec: PASS omap3-beagle-xm 0 min 46.6 sec: PASS exynos5420-arndale-octa 0 min 41.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 26.1 sec: PASS omap5-uevm 1 min 42.5 sec: PASS (Warnings: 6) omap4-panda-es 0 min 52.4 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.6 sec: PASS sun4i-a10-cubieboard 0 min 11.4 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 21.9 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.1 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.6 sec: FAIL exynos5250-arndale 0 min 29.9 sec: PASS exynos5410-smdk5410 0 min 27.3 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 16.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.1 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.4 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 25.6 sec: PASS armada-370-mirabox 0 min 20.8 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 20.4 sec: PASS Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 55048012 02109471 [<c0186b78>] (_set_bit) from [<c01c9ba8>] (n_tty_set_termios+0x234/0x348) [<c01c9ba8>] (n_tty_set_termios) from [<c01c9da8>] (n_tty_open+0xec/0x114) [<c01c9da8>] (n_tty_open) from [<c01cd804>] (tty_ldisc_open+0x3c/0x78) [<c01cd804>] (tty_ldisc_open) from [<c01cdf80>] (tty_ldisc_setup+0x18/0x5c) [<c01cdf80>] (tty_ldisc_setup) from [<c01c6bf4>] (tty_init_dev+0x94/0x184) [<c01c6bf4>] (tty_init_dev) from [<c01c7500>] (tty_open+0x2d0/0x5a8) [<c01c7500>] (tty_open) from [<c00ae7d0>] (chrdev_open+0xc4/0x184) [<c00ae7d0>] (chrdev_open) from [<c00a9250>] (do_dentry_open.isra.12+0x1b0/0x270) [<c00a9250>] (do_dentry_open.isra.12) from [<c00a93e0>] (finish_open+0x20/0x38) [<c00a93e0>] (finish_open) from [<c00b747c>] (do_last.isra.41+0x5a4/0xb50) [<c00b747c>] (do_last.isra.41) from [<c00b7adc>] (path_openat+0xb4/0x5c8) [<c00b7adc>] (path_openat) from [<c00b82f4>] (do_filp_open+0x2c/0x80) [<c00b82f4>] (do_filp_open) from [<c00aa338>] (do_sys_open+0x110/0x1cc) [<c00aa338>] (do_sys_open) from [<c0580c0c>] (kernel_init_freeable+0x128/0x1c8) [<c0580c0c>] (kernel_init_freeable) from [<c041fea8>] (kernel_init+0x8/0xec) [<c041fea8>] (kernel_init) from [<c000e638>] (ret_from_fork+0x14/0x3c) Code: 00f091f5 1233a0e1 9f2f91e1 032082e1 (920f81e1) ---[ end trace d04ca1b856ed25fd ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.15.0-rc8-06620-g2b03adc #1 [<c0014b04>] (unwind_backtrace) from [<c0010eb0>] (show_stack+0x10/0x14) [<c0010eb0>] (show_stack) from [<c0422f68>] (dump_stack+0x74/0x90) [<c0422f68>] (dump_stack) from [<c00139dc>] (handle_IPI+0x134/0x170) [<c00139dc>] (handle_IPI) from [<c0008650>] (armada_370_xp_handle_irq+0xb0/0xcc) [<c0008650>] (armada_370_xp_handle_irq) from [<c0011980>] (__irq_svc+0x40/0x50) Exception stack(0xed87bfa0 to 0xed87bfe8) bfa0: edfd53d8 00000000 007101ea 00000000 ed87a000 c05c049c ed87a000 c0429d78 bfc0: c05f4e97 00000001 c05f4e97 ed87a000 00000000 ed87bfe8 c000f168 c004ed84 bfe0: 60000313 ffffffff [<c0011980>] (__irq_svc) from [<c004ed84>] (cpu_startup_entry+0xec/0x144) [<c004ed84>] (cpu_startup_entry) from [<00008768>] (0x8768) ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 21.22 seconds. # PYBOOT: Result: FAIL arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 16.240115] of_get_named_gpiod_flags exited with status 0 [ 16.244278] mmcblk0: p1 p2 p3 p4 [ 16.247509] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00b8088 [ 16.254985] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.259921] Modules linked in: [ 16.262959] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-rc8-06620-g2b03adc #1 [ 16.271889] Workqueue: kmmcd mmc_rescan [ 16.275694] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.281074] PC is at rescan_partitions+0xb4/0x290 [ 16.285746] LR is at 0xf00b8000 [ 16.288867] pc : [<c01af9a0>] lr : [<f00b8000>] psr: 20000113 [ 16.288867] sp : ef0b5c78 ip : 00000000 fp : 00000000 [ 16.300303] r10: 00000000 r9 : ed6a7180 r8 : ed604200 [ 16.305503] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.312002] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.318502] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.325780] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.331499] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.337824] Stack: (0xef0b5c78 to 0xef0b6000) [ 16.342159] 5c60: c054c984 00000001 [ 16.350306] 5c80: ef0b4000 c0387410 00000001 c05284b8 ed58f4d8 c0528388 eec24380 ed58f3a8 [ 16.358451] 5ca0: eec24330 eec24280 00000000 ed58f3a8 00000000 00000000 00000000 eec24280 [ 16.366596] 5cc0: ed604200 eec24290 00000001 00000000 00000000 c00e305c c00e1a00 00000000 [ 16.374743] 5ce0: 00000000 00000001 eec24280 00000000 ed604270 ed60420c 00000000 ed58f2c0 [ 16.382887] 5d00: 00000003 c00e32c0 c052a68c 00000001 00000003 c03886d8 c052a68c c00e1fd0 [ 16.391033] 5d20: ef0b5d2c c0221dbc ed604240 00000001 eec24280 ed604200 ed604270 ed60420c [ 16.399178] 5d40: 00000000 ed58f2c0 00000003 c01ad8b4 c01ac704 ed604200 00000080 0b300000 [ 16.407324] 5d60: 00000002 ed68c000 ed689800 ed68ec00 ed68ec00 ed68eebc c02baacc ed689800 [ 16.415469] 5d80: ed68ec00 ed689988 ef0b5dce c02bb9d0 00000056 ed68986c 00000003 ed68c000 [ 16.423614] 5da0: ed689800 c02bc600 00000003 ef0b5dce 00000008 ed696870 c0468fcc ed68ee98 [ 16.431760] 5dc0: 00000000 34362e33 42694720 32310000 694b2038 c0000042 00000001 ed689808 [ 16.439905] 5de0: c058e55c 00000000 c054c90c 00000001 00000000 c054c598 ef013c00 c02b0e68 [ 16.448051] 5e00: c02b0e50 c0225860 00000000 ed689808 c0225a10 ed68f808 00000000 c022403c [ 16.456196] 5e20: ef2c5698 ed74fdc4 ed689808 ed68983c c054c4b8 c022573c ed689808 ed689808 [ 16.464342] 5e40: c054c4b8 c0224eac ed689808 00000000 ed689810 c0223514 ef013c00 c0381354 [ 16.472488] 5e60: c047c108 ef0b5e7c 00061a80 ed689800 ed689808 c0451250 00000001 c047c0bc [ 16.480633] 5e80: 00000000 c02b127c c047c0bc c0451250 c047c078 00000001 ed68~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.61 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.472839] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.480773] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.492706] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.500030] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.511505] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.520050] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.531982] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.539306] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.550781] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.558593] HS USB OTG: no transceiver configured [ 3.563323] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.571166] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.579101] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.591033] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.598327] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.609802] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.618347] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.630279] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.637603] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.649078] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.656890] HS USB OTG: no transceiver configured [ 3.661621] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.669464] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.677459] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.689361] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.696685] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.708160] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.716735] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.728668] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.735992] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.747467] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.755279] HS USB OTG: no transceiver configured [ 3.760009] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.767852] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.775817] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.787750] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.42 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

arm-soc boot: 63 pass, 0 fail (v3.15-rc8-4595-gc96fa31)

by Kevin's boot bot

Tree/Branch: arm-soc Git describe: v3.15-rc8-4595-gc96fa31 Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 18.0 sec: PASS da850-evm 0 min 16.6 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.9 sec: PASS tegra30-beaver 0 min 24.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.4 sec: PASS omap5-uevm 1 min 38.6 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 13.1 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.6 sec: PASS armada-370-mirabox 0 min 21.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.3 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 50.0 sec: PASS legacy,3530beagle 0 min 28.4 sec: PASS (Warnings: 1) omap4-panda 0 min 55.1 sec: PASS omap3-overo-tobi 0 min 23.2 sec: PASS am335x-bone 0 min 29.1 sec: PASS omap3-overo-storm-tobi 0 min 21.9 sec: PASS omap5-uevm 0 min 57.0 sec: PASS (Warnings: 6) omap3-n900 0 min 17.6 sec: PASS legacy,n900 0 min 17.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 50.1 sec: PASS legacy,3730storm 0 min 22.8 sec: PASS legacy,3530overo 0 min 24.5 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS sun7i-a20-cubieboard2 0 min 15.8 sec: PASS sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 28.8 sec: PASS am335x-bone 0 min 23.6 sec: PASS tegra124-jetson-tk1 0 min 18.4 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 52.6 sec: PASS imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 14.3 sec: PASS tegra30-beaver 0 min 20.7 sec: PASS omap3-n900 0 min 16.4 sec: PASS qcom-apq8074-dragonboard 0 min 18.9 sec: PASS bcm28155-ap 0 min 26.9 sec: PASS omap3-overo-tobi 0 min 22.5 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap3-beagle-xm 0 min 43.7 sec: PASS exynos5420-arndale-octa 0 min 41.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 26.1 sec: PASS omap5-uevm 1 min 39.4 sec: PASS (Warnings: 6) omap4-panda-es 0 min 51.3 sec: PASS exynos5250-arndale 0 min 31.3 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.9 sec: PASS sun4i-a10-cubieboard 0 min 11.4 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.3 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.9 sec: PASS exynos5250-arndale 0 min 34.9 sec: PASS exynos5410-smdk5410 0 min 27.3 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 25.3 sec: PASS arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 25.6 sec: PASS armada-370-mirabox 0 min 20.8 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.3 sec: PASS

11 years, 5 months

next boot: 62 pass, 1 fail (next-20140605)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140605 Failed boot tests (console logs at the end) =========================================== ste-snowball: DEAD: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.2 sec: PASS da850-evm 0 min 14.9 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 18.0 sec: PASS tegra30-beaver 0 min 18.0 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS omap5-uevm 1 min 41.2 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.7 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.7 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 36.7 sec: PASS am335x-boneblack 0 min 22.0 sec: PASS omap3-beagle-xm 0 min 45.6 sec: PASS legacy,3530beagle 0 min 23.4 sec: PASS (Warnings: 1) omap4-panda 0 min 55.8 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 22.9 sec: PASS am335x-bone 0 min 23.9 sec: PASS omap3-overo-storm-tobi 0 min 22.0 sec: PASS omap5-uevm 0 min 56.4 sec: PASS (Warnings: 1) omap3-n900 0 min 17.3 sec: PASS legacy,n900 0 min 17.1 sec: PASS (Warnings: 1) omap4-panda-es 0 min 48.5 sec: PASS (Warnings: 1) legacy,3730storm 0 min 19.9 sec: PASS legacy,3530overo 0 min 20.9 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS am335x-boneblack 0 min 22.6 sec: PASS sun7i-a20-cubieboard2 0 min 13.0 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 28.5 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 18.2 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 49.3 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS ste-snowball 1 min 13.5 sec: PASS tegra30-beaver 0 min 24.0 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 20.2 sec: PASS bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 22.6 sec: PASS omap3-overo-storm-tobi 0 min 23.8 sec: PASS omap3-beagle-xm 0 min 47.6 sec: PASS exynos5420-arndale-octa 0 min 41.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 31.0 sec: PASS omap5-uevm 1 min 35.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 50.2 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.4 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.6 sec: PASS sun4i-a10-cubieboard 0 min 14.5 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.2 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.7 sec: PASS exynos5250-arndale 0 min 30.3 sec: PASS exynos5410-smdk5410 0 min 27.7 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.9 sec: PASS imx6q-wandboard 0 min 14.0 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 0.0 sec: DEAD arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.8 sec: PASS armada-370-mirabox 0 min 22.6 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-u8500_defconfig ------------------- ste-snowball: DEAD: last 40 lines of boot log: ---------------------------------------------- [ 3.472045] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.479339] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.490844] musb-hdrc musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.498657] HS USB OTG: no transceiver configured [ 3.503387] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511230] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519165] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531097] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538391] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.549865] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558380] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570343] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577636] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589141] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.596954] HS USB OTG: no transceiver configured [ 3.601654] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609497] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617431] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629364] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.636657] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648162] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.656677] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668609] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.675933] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687408] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695251] HS USB OTG: no transceiver configured [ 3.699951] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.707794] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.715728] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.727630] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.734954] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746429] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.754943] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.766876] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774200] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785675] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793487] HS USB OTG: no transceiver configured [ 3.798187] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806060] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.813964] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto

11 years, 5 months

mainline boot: 33 passed 8 failed (mainline/v3.15-rc8-6620-g2b03adc)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:23.86 cubie2 multi_v7_defconfig : FAILED 1:39.65 cubie2 multi_lpae_defconfig : FAILED 1:22.15 cubox multi_v7_defconfig : FAILED 1:32.39 omap5uevm omap2plus_defconfig : FAILED 1:46.17 omap5uevm multi_v7_defconfig : FAILED 1:50.21 omap5uevm multi_lpae_defconfig : FAILED 1:43.77 snowball u8500_defconfig : FAILED 1:51.43 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.45 arndale exynos_defconfig : passed 1:29.61 arndale multi_v7_defconfig : passed 1:33.79 arndale multi_lpae_defconfig : passed 1:19.22 bbb omap2plus_defconfig : passed 1:32.63 bbb multi_v7_defconfig : passed 1:21.31 beaver tegra_defconfig : passed 1:03.07 beaver multi_v7_defconfig : passed 1:02.48 capri bcm_defconfig : passed 0:39.14 capri multi_v7_defconfig : passed 0:41.45 cubie sunxi_defconfig : passed 1:14.44 cubie multi_v7_defconfig : passed 1:35.27 dalmore tegra_defconfig : passed 1:26.96 dalmore multi_v7_defconfig : passed 1:25.24 dalmore multi_lpae_defconfig : passed 1:23.93 hummingboard imx_v6_v7_defconfig : passed 1:30.73 hummingboard multi_v7_defconfig : passed 1:09.07 jetson tegra_defconfig : passed 0:56.64 jetson multi_v7_defconfig : passed 1:01.27 jetson multi_lpae_defconfig : passed 1:00.20 panda omap2plus_defconfig : warnings 1:31.00 panda multi_v7_defconfig : warnings 1:41.84 sama5 sama5_defconfig : passed 1:52.78 seaboard tegra_defconfig : passed 1:25.11 seaboard multi_v7_defconfig : passed 1:12.29 snow exynos_defconfig : passed 1:18.72 snow multi_v7_defconfig : passed 1:28.77 snow multi_lpae_defconfig : passed 1:29.45 snowball multi_v7_defconfig : passed 4:42.81 trimslice tegra_defconfig : passed 1:11.50 trimslice multi_v7_defconfig : passed 1:59.36 wandboard imx_v6_v7_defconfig : passed 1:07.34 wandboard multi_v7_defconfig : passed 1:16.25 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.270772] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.278276] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.284166] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.293136] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.302164] scsi0 : ahci_platform [ 1.305899] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.314597] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.320237] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.328328] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.340767] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.347828] hub 1-0:1.0: USB hub found [ 1.351677] hub 1-0:1.0: 1 port detected [ 1.356748] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.362421] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.370364] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.385754] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.392795] hub 2-0:1.0: USB hub found [ 1.396631] hub 2-0:1.0: 1 port detected [ 1.401664] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.408346] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.416230] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.480596] hub 3-0:1.0: USB hub found [ 1.484436] hub 3-0:1.0: 1 port detected [ 1.489443] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.496165] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.504005] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.565579] hub 4-0:1.0: USB hub found [ 1.569422] hub 4-0:1.0: 1 port detected [ 1.574101] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.661616] No MAC Management Counters available [ 1.666396] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.673035] IP-Config: Failed to open eth0 [ 1.677160] IP-Config: No network devices available [ 1.682073] vcc3v3: disabling [ 1.685040] vcc3v0: disabling [ 1.688133] ALSA device list: [ 1.691112] No soundcards found. [ 1.695268] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.265095] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.272596] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.278481] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.287449] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.296440] scsi0 : ahci_platform [ 1.300167] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.308883] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.314528] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.322604] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.335094] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.342150] hub 1-0:1.0: USB hub found [ 1.346011] hub 1-0:1.0: 1 port detected [ 1.351074] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.356748] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.364692] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.380077] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.387119] hub 2-0:1.0: USB hub found [ 1.390955] hub 2-0:1.0: 1 port detected [ 1.395972] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.402661] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.410547] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.474971] hub 3-0:1.0: USB hub found [ 1.478821] hub 3-0:1.0: 1 port detected [ 1.483830] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.490544] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.498387] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.559899] hub 4-0:1.0: USB hub found [ 1.563732] hub 4-0:1.0: 1 port detected [ 1.568410] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.655935] No MAC Management Counters available [ 1.660705] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.667317] IP-Config: Failed to open eth0 [ 1.671442] IP-Config: No network devices available [ 1.676358] vcc3v3: disabling [ 1.679323] vcc3v0: disabling [ 1.682416] ALSA device list: [ 1.685396] No soundcards found. [ 1.689535] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.892458] usb1-vbus: 5000 mV [ 0.895955] usb2-vbus: 5000 mV [ 0.965878] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.973365] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.979256] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.988224] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.997128] scsi0 : ahci_platform [ 1.000766] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008989] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.014584] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.022444] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045901] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052848] hub 1-0:1.0: USB hub found [ 1.056694] hub 1-0:1.0: 1 port detected [ 1.061167] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066811] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.074660] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095845] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102714] hub 2-0:1.0: USB hub found [ 1.106539] hub 2-0:1.0: 1 port detected [ 1.110977] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.117650] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.125466] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.190662] hub 3-0:1.0: USB hub found [ 1.194449] hub 3-0:1.0: 1 port detected [ 1.198933] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.205566] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.213427] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.280662] hub 4-0:1.0: USB hub found [ 1.284458] hub 4-0:1.0: 1 port detected [ 1.288805] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.375875] ata1: SATA link down (SStatus 0 SControl 300) [ 1.392186] No MAC Management Counters available [ 1.396955] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.403555] IP-Config: Failed to open eth0 [ 1.407677] IP-Config: No network devices available [ 1.412575] vcc3v3: disabling [ 1.415542] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.240056] SPEAr-ehci: EHCI SPEAr driver [ 1.244165] tegra-ehci: Tegra EHCI driver [ 1.248300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.254482] ohci-pci: OHCI PCI platform driver [ 1.258988] ohci-platform: OHCI generic platform driver [ 1.264303] ohci-omap3: OHCI OMAP3 driver [ 1.268403] SPEAr-ohci: OHCI SPEAr driver [ 1.273143] usbcore: registered new interface driver usb-storage [ 1.280633] mousedev: PS/2 mouse device common for all mice [ 1.287605] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.296921] i2c /dev entries driver [ 1.302536] usbcore: registered new interface driver uvcvideo [ 1.308291] USB Video Class driver (1.1.1) [ 1.312392] gspca_main: v2.14.0 registered [ 1.319524] orion_wdt: Initial timeout 25 sec [ 1.325010] sdhci: Secure Digital Host Controller Interface driver [ 1.331176] sdhci: Copyright(c) Pierre Ossman [ 1.336213] Synopsys Designware Multimedia Card Interface Driver [ 1.342580] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.348978] usbcore: registered new interface driver usbhid [ 1.354539] usbhid: USB HID core driver [ 1.359504] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368215] TCP: cubic registered [ 1.371571] NET: Registered protocol family 17 [ 1.376029] can: controller area network core (rev 20120528 abi 9) [ 1.382264] NET: Registered protocol family 29 [ 1.386703] can: raw protocol (rev 20120528) [ 1.390968] can: broadcast manager protocol (rev 20120528 t) [ 1.396624] can: netlink gateway (rev 20130117) max_hops=1 [ 1.402496] Key type dns_resolver registered [ 1.406965] ThumbEE CPU extension supported. [ 1.411243] Registering SWP/SWPB emulation handler [ 1.416024] PJ4 iWMMXt v2 coprocessor enabled. [ 1.421613] USB Power: 5000 mV [ 1.425184] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-06 00:11:55 UTC (1402013515) [ 1.435714] ALSA device list: [ 1.438668] No soundcards found. [ 1.442596] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.641643] can: raw protocol (rev 20120528) [ 47.641650] can: broadcast manager protocol (rev 20120528 t) [ 47.641660] can: netlink gateway (rev 20130117) max_hops=1 [ 47.641950] Key type dns_resolver registered [ 47.642045] omap_vc_init_channel: No PMIC info for vdd_core [ 47.642047] omap_vp_init: No PMIC info for vdd_core [ 47.642050] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.642052] omap_vp_init: No PMIC info for vdd_mm [ 47.642055] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.642057] omap_vp_init: No PMIC info for vdd_mpu [ 47.642358] ThumbEE CPU extension supported. [ 47.642370] Registering SWP/SWPB emulation handler [ 47.668137] palmas 0-0048: Irq flag is 0x00000000 [ 47.725356] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.732129] mmc0: new high speed MMC card at address 0001 [ 47.738020] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.742841] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.749111] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.755976] mmcblk0: unknown partition table [ 47.760843] smps123: 600 <--> 1500 mV at 1060 mV [ 47.766378] mmcblk0boot1: unknown partition table [ 47.771978] smps45: 600 <--> 1310 mV at 1030 mV [ 47.772169] mmcblk0boot0: unknown partition table [ 47.783408] smps6: 1200 mV [ 47.787375] smps7: 1800 mV [ 47.791481] smps8: 600 <--> 1310 mV at 1040 mV [ 47.797215] smps9: failed to get the current voltage [ 47.802463] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.814518] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.942230] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.087239] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.093319] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.100735] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.107597] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.115293] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.128755] ALSA device list: [ 48.131855] No soundcards found. [ 48.135860] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 48.081284] can: raw protocol (rev 20120528) [ 48.081290] can: broadcast manager protocol (rev 20120528 t) [ 48.081301] can: netlink gateway (rev 20130117) max_hops=1 [ 48.081601] Key type dns_resolver registered [ 48.081683] omap_vc_init_channel: No PMIC info for vdd_core [ 48.081685] omap_vp_init: No PMIC info for vdd_core [ 48.081689] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.081691] omap_vp_init: No PMIC info for vdd_mm [ 48.081695] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.081696] omap_vp_init: No PMIC info for vdd_mpu [ 48.082018] ThumbEE CPU extension supported. [ 48.082031] Registering SWP/SWPB emulation handler [ 48.097479] palmas 0-0048: Irq flag is 0x00000000 [ 48.164997] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.171743] mmc0: new high speed MMC card at address 0001 [ 48.177614] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.182441] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.188718] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.195584] mmcblk0: unknown partition table [ 48.200598] smps123: 600 <--> 1500 mV at 1060 mV [ 48.205549] mmcblk0boot1: unknown partition table [ 48.211471] mmcblk0boot0: unknown partition table [ 48.216724] smps45: 600 <--> 1310 mV at 1030 mV [ 48.223233] smps6: 1200 mV [ 48.227230] smps7: 1800 mV [ 48.231340] smps8: 600 <--> 1310 mV at 1040 mV [ 48.237098] smps9: failed to get the current voltage [ 48.242349] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.254403] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.381801] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.526810] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.532886] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.540310] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.547169] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.554863] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.568292] ALSA device list: [ 48.571387] No soundcards found. [ 48.575389] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.593179] Key type dns_resolver registered [ 2.593295] omap_vc_init_channel: No PMIC info for vdd_core [ 2.593300] omap_vp_init: No PMIC info for vdd_core [ 2.593309] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.593313] omap_vp_init: No PMIC info for vdd_mm [ 2.593322] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.593325] omap_vp_init: No PMIC info for vdd_mpu [ 2.593888] ThumbEE CPU extension supported. [ 2.593910] Registering SWP/SWPB emulation handler [ 2.593918] SmartReflex Class3 initialized [ 2.615573] palmas 0-0048: Irq flag is 0x00000000 [ 2.675910] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.676211] mmc0: new high speed MMC card at address 0001 [ 2.682095] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.682330] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.682534] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.685358] mmcblk0: unknown partition table [ 2.687327] mmcblk0boot1: unknown partition table [ 2.689280] mmcblk0boot0: unknown partition table [ 2.765742] smps123: 600 <--> 1500 mV at 1060 mV [ 2.772823] smps45: 600 <--> 1310 mV at 1030 mV [ 2.780237] smps6: 1200 mV [ 2.784936] smps7: 1800 mV [ 2.789858] smps8: 600 <--> 1310 mV at 1040 mV [ 2.796283] smps9: failed to get the current voltage [ 2.802236] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.816613] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.825453] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.832638] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.838751] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.847883] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.857274] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.864251] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.872777] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.881423] sr_init: No PMIC hook to init smartreflex [ 2.886913] sr_init: platform driver register failed for SR [ 2.915221] pbias_mmc_omap5: disabling [ 2.920733] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.508880] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.520782] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.528106] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.539581] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.548156] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.560089] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.567413] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.578887] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.586700] HS USB OTG: no transceiver configured [ 3.591430] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.599273] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.607208] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.619140] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.626434] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.637908] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.646514] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.658416] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.665740] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.677215] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.685058] HS USB OTG: no transceiver configured [ 3.689758] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.697601] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.705535] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.717468] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.724792] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.736267] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.744842] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.756774] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.764099] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.775573] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.783386] HS USB OTG: no transceiver configured [ 3.788085] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.795959] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.803894] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.815826] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.823120] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.834625] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.843200] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

mainline build: 22 warnings 0 failures (mainline/v3.15-rc8-6620-g2b03adc)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 2b03adc Merge tag 'microblaze-3.16-rc1' of git://git.monstr.eu/linux-2.6-microblaze into next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc8-6620-g2b03adc/ Runtime: 45m 55s Passed: 126 Failed: 0 Warnings: 22 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25594): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85d98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85798): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d5f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports