CoreSight

coresight@lists.linaro.org

2 participants
2604 discussions

Re: [PATCH] coresight: etm4x: Fix PID tracing when perf is run in an init PID namespace

by Suzuki K Poulose

On 25/09/2024 14:13, Julien Meunier wrote: > The previous implementation limited the tracing capabilities when perf > was run in the init PID namespace, making it impossible to trace > applications in non-init PID namespaces. > > This update improves the tracing process by verifying the event owner. > This allows us to determine whether the user has the necessary > permissions to trace the application. > > Cc: stable(a)vger.kernel.org > Fixes: aab473867fed ("coresight: etm4x: Don't trace PID for non-root PID namespace") > Signed-off-by: Julien Meunier <julien.meunier(a)nokia.com> Thanks for the fix, I will queue this for v6.13 Suzuki > --- > drivers/hwtracing/coresight/coresight-etm4x-core.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c > index bf01f01964cf..8365307b1aec 100644 > --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c > +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c > @@ -695,7 +695,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev, > > /* Only trace contextID when runs in root PID namespace */ > if ((attr->config & BIT(ETM_OPT_CTXTID)) && > - task_is_in_init_pid_ns(current)) > + task_is_in_init_pid_ns(event->owner)) > /* bit[6], Context ID tracing bit */ > config->cfg |= TRCCONFIGR_CID; > > @@ -710,7 +710,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev, > goto out; > } > /* Only trace virtual contextID when runs in root PID namespace */ > - if (task_is_in_init_pid_ns(current)) > + if (task_is_in_init_pid_ns(event->owner)) > config->cfg |= TRCCONFIGR_VMID | TRCCONFIGR_VMIDOPT; > } >

1 year, 3 months

Re: [PATCH] perf: cs-etm: Fix the assert() to handle captured and unprocessed cpu trace

by Arnaldo Carvalho de Melo

On Wed, Sep 25, 2024 at 04:04:55PM -0700, Namhyung Kim wrote: > On Wed, Sep 25, 2024 at 10:54:31AM +0100, James Clark wrote: > > > > > > On 25/09/2024 12:39 am, Ilkka Koskinen wrote: > > > If one builds perf with DEBUG=1, captures data on multiple CPUs and > > > finally runs 'perf report -C <cpu>' for only one of the cpus, assert() > > > aborts the program. This happens because there are empty queues with > > > format set. This patch changes the condition to abort only if a queue > > > is not empty and if the format is unset. > > > > > > $ make -C tools/perf DEBUG=1 CORESIGHT=1 CSLIBS=/usr/lib CSINCLUDES=/usr/include install > > > $ perf record -o kcore --kcore -e cs_etm/timestamp/k -s -C 0-1 dd if=/dev/zero of=/dev/null bs=1M count=1 > > > $ perf report --input kcore/data --vmlinux=/home/ikoskine/projects/linux/vmlinux -C 1 > > > Aborted (core dumped) > > > > > > Fixes: 57880a7966be ("perf: cs-etm: Allocate queues for all CPUs") > > > Signed-off-by: Ilkka Koskinen <ilkka(a)os.amperecomputing.com> > > > --- > > > tools/perf/util/cs-etm.c | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c > > > index 90f32f327b9b..40f047baef81 100644 > > > --- a/tools/perf/util/cs-etm.c > > > +++ b/tools/perf/util/cs-etm.c > > > @@ -3323,7 +3323,7 @@ static int cs_etm__create_decoders(struct cs_etm_auxtrace *etm) > > > * Don't create decoders for empty queues, mainly because > > > * etmq->format is unknown for empty queues. > > > */ > > > - assert(empty == (etmq->format == UNSET)); > > > + assert(empty || etmq->format != UNSET); > > > if (empty) > > > continue; > > > > Oops I didn't realize you could filter on CPU in report mode. Thanks for the > > fix. Adding a test to the end of test_arm_coresight.sh might be quite > > useful. Either way: > > > > Reviewed-by: James Clark <james.clark(a)linaro.org> > > Thanks, it should go to the perf-tool. Arnaldo, please pick up. Right, picking it now. Thanks, - Arnaldo

1 year, 3 months

[PATCH v5 0/2] arm64: dts: qcom: sm8450: Add coresight nodes

by Mao Jinlong

Change since V4: 1. Use ^ete(-[0-9]+)?$ for the pattern of node name -- comments from Krzysztof Kozlowski <krzk(a)kernel.org> 2. Update commit message --- comments from Rob Herring <robh(a)kernel.org> Change since V3: 1. Use ^ete-[0-9]+$ for the pattern of node name -- comments from Rob Herring Change since V2: 1. Change the name in binding as 'ete'. Change since V1: 1. Remove the pattern match of ETE node name. 2. Update the tmc-etr node name in DT. Mao Jinlong (2): dt-bindings: arm: coresight: Update the pattern of ete node name arm64: dts: qcom: sm8450: Add coresight nodes .../arm/arm,embedded-trace-extension.yaml | 6 +- arch/arm64/boot/dts/qcom/sm8450.dtsi | 726 ++++++++++++++++++ 2 files changed, 729 insertions(+), 3 deletions(-) -- 2.46.0

1 year, 3 months

Re: [PATCH] perf: cs-etm: Fix the assert() to handle captured and unprocessed cpu trace

by James Clark

On 25/09/2024 12:39 am, Ilkka Koskinen wrote: > If one builds perf with DEBUG=1, captures data on multiple CPUs and > finally runs 'perf report -C <cpu>' for only one of the cpus, assert() > aborts the program. This happens because there are empty queues with > format set. This patch changes the condition to abort only if a queue > is not empty and if the format is unset. > > $ make -C tools/perf DEBUG=1 CORESIGHT=1 CSLIBS=/usr/lib CSINCLUDES=/usr/include install > $ perf record -o kcore --kcore -e cs_etm/timestamp/k -s -C 0-1 dd if=/dev/zero of=/dev/null bs=1M count=1 > $ perf report --input kcore/data --vmlinux=/home/ikoskine/projects/linux/vmlinux -C 1 > Aborted (core dumped) > > Fixes: 57880a7966be ("perf: cs-etm: Allocate queues for all CPUs") > Signed-off-by: Ilkka Koskinen <ilkka(a)os.amperecomputing.com> > --- > tools/perf/util/cs-etm.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c > index 90f32f327b9b..40f047baef81 100644 > --- a/tools/perf/util/cs-etm.c > +++ b/tools/perf/util/cs-etm.c > @@ -3323,7 +3323,7 @@ static int cs_etm__create_decoders(struct cs_etm_auxtrace *etm) > * Don't create decoders for empty queues, mainly because > * etmq->format is unknown for empty queues. > */ > - assert(empty == (etmq->format == UNSET)); > + assert(empty || etmq->format != UNSET); > if (empty) > continue; > Oops I didn't realize you could filter on CPU in report mode. Thanks for the fix. Adding a test to the end of test_arm_coresight.sh might be quite useful. Either way: Reviewed-by: James Clark <james.clark(a)linaro.org>

1 year, 3 months

Re: [PATCH v3 0/7] perf: cs-etm: Coresight decode and disassembly improvements

by James Clark

On 18/09/2024 12:23 pm, Ganapatrao Kulkarni wrote: > > Hi James, > > On 16-09-2024 07:27 pm, James Clark wrote: >> A set of changes that came out of the issues reported here [1]. >> >> * First 2 patches fix a decode bug in Perf and add support for new >> consistency checks in OpenCSD >> * The remaining ones make the disassembly script easier to test >> and use. This also involves adding a new Python binding to >> Perf to get a config value (perf_config_get()) >> >> [1]: >> https://lore.kernel.org/linux-arm-kernel/20240719092619.274730-1-gankulkarn… >> > > Tried this series with below commands and issue is not seen as reported > in [1]. > > record: > timeout 8s ./perf record -e cs_etm// -C 1 -o kcore --kcore dd > if=/dev/zero of=/dev/null > > decode: > ./perf script -i ./kcore -s scripts/python/arm-cs-trace-disasm.py -- -d > objdump -k kcore/kcore_dir/kcore > > ./perf script -i ./kcore -s scripts/python/arm-cs-trace-disasm.py -F > cpu,event,ip,addr,sym -- -d objdump -k kcore/kcore_dir/kcore > > Feel free to add for 1/7 and 2/7. > Tested-by: Ganapatrao Kulkarni <gankulkarni(a)os.amperecomputing.com> > Thanks for testing!

1 year, 3 months

Re: [PATCH v10 8/8] Documentation: coresight: Panic support

by Linu Cherian

Hi, On 2024-09-17 at 07:16:46, Bagas Sanjaya (bagasdotme(a)gmail.com) wrote: > On Mon, Sep 16, 2024 at 04:04:37PM +0530, Linu Cherian wrote: > > +3. On a kernel panic, all coresight blocks are disabled, necessary > > + metadata is synced by kernel panic handler. > "... and necessary metadata ..." > > + > > + System would eventually reboot or boot a crashdump kernel. > > + > > +4. For platforms that supports crashdump kernel, raw trace data can be > > + dumped using the coresight sysfs interface from the crashdump kernel > > + itself. Persistent RAM is not a requirement in this case. > > + > > +5. For platforms that supports persistent RAM, trace data can be dumped > > + using the coresight sysfs interface in the subsequent Linux boot. > > + Crashdump kernel is not a requirement in this case. Persistent RAM > > + ensures that trace data is intact across reboot. > > + > > +Coresight trace during Watchdog reset > > +------------------------------------- > > +The main difference between addressing the watchdog reset and kernel panic > > +case are below, > "... are:" > > +Sample commands for testing a Kernel panic case with ETR sink > > +------------------------------------------------------------- > > + > > +1. Boot Linux kernel with "crash_kexec_post_notifiers" added to the kernel > > + bootargs. This is mandatory if the user would like to read the tracedata > > + from the crashdump kernel. > > + > > +2. Enable the preloaded ETM configuration > > + > > + #echo 1 > /sys/kernel/config/cs-syscfg/configurations/panicstop/enable > > + > > +3. Configure CTI using sysfs interface:: > > + > > + #./cti_setup.sh > > + > > + #cat cti_setup.sh > > + > > + > > + cd /sys/bus/coresight/devices/ > > + > > + ap_cti_config () { > > + #ETM trig out[0] trigger to Channel 0 > > + echo 0 4 > channels/trigin_attach > > + } > > + > > + etf_cti_config () { > > + #ETF Flush in trigger from Channel 0 > > + echo 0 1 > channels/trigout_attach > > + echo 1 > channels/trig_filter_enable > > + } > > + > > + etr_cti_config () { > > + #ETR Flush in from Channel 0 > > + echo 0 1 > channels/trigout_attach > > + echo 1 > channels/trig_filter_enable > > + } > > + > > + ctidevs=`find . -name "cti*"` > > + > > + for i in $ctidevs > > + do > > + cd $i > > + > > + connection=`find . -name "ete*"` > > + if [ ! -z "$connection" ] > > + then > > + echo "AP CTI config for $i" > > + ap_cti_config > > + fi > > + > > + connection=`find . -name "tmc_etf*"` > > + if [ ! -z "$connection" ] > > + then > > + echo "ETF CTI config for $i" > > + etf_cti_config > > + fi > > + > > + connection=`find . -name "tmc_etr*"` > > + if [ ! -z "$connection" ] > > + then > > + echo "ETR CTI config for $i" > > + etr_cti_config > > + fi > > + > > + cd .. > > + done > > + > > +Note: CTI connections are SOC specific and hence the above script is > > +added just for reference. > > + > > +4. Choose reserved buffer mode for ETR buffer > > + #echo "resrv" > /sys/bus/coresight/devices/tmc_etr0/buf_mode_preferred > > + > > +5. Enable stop on flush trigger configuration > > + #echo 1 > /sys/bus/coresight/devices/tmc_etr0/stop_on_flush > > + > > +6. Start Coresight tracing on cores 1 and 2 using sysfs interface > > + > > +7. Run some application on core 1 > > + #taskset -c 1 dd if=/dev/urandom of=/dev/null & > > + > > +8. Invoke kernel panic on core 2 > > + #echo 1 > /proc/sys/kernel/panic > > + #taskset -c 2 echo c > /proc/sysrq-trigger > > + > > +9. From rebooted kernel or crashdump kernel, read crashdata > > + > > + #dd if=/dev/crash_tmc_etr0 of=/trace/cstrace.bin > > + > > +10. Run opencsd decoder tools/scripts to generate the instruction trace. > > Format all command lines as literal code blocks to be consistent: > > ---- >8 ---- > diff --git a/Documentation/trace/coresight/panic.rst b/Documentation/trace/coresight/panic.rst > index 3b53d91cace8fd..864f6c05b3f7af 100644 > --- a/Documentation/trace/coresight/panic.rst > +++ b/Documentation/trace/coresight/panic.rst > @@ -113,7 +113,7 @@ Sample commands for testing a Kernel panic case with ETR sink > bootargs. This is mandatory if the user would like to read the tracedata > from the crashdump kernel. > > -2. Enable the preloaded ETM configuration > +2. Enable the preloaded ETM configuration:: > > #echo 1 > /sys/kernel/config/cs-syscfg/configurations/panicstop/enable > > @@ -176,22 +176,26 @@ Sample commands for testing a Kernel panic case with ETR sink > Note: CTI connections are SOC specific and hence the above script is > added just for reference. > > -4. Choose reserved buffer mode for ETR buffer > +4. Choose reserved buffer mode for ETR buffer:: > + > #echo "resrv" > /sys/bus/coresight/devices/tmc_etr0/buf_mode_preferred > > -5. Enable stop on flush trigger configuration > +5. Enable stop on flush trigger configuration:: > + > #echo 1 > /sys/bus/coresight/devices/tmc_etr0/stop_on_flush > > 6. Start Coresight tracing on cores 1 and 2 using sysfs interface > > -7. Run some application on core 1 > +7. Run some application on core 1:: > + > #taskset -c 1 dd if=/dev/urandom of=/dev/null & > > -8. Invoke kernel panic on core 2 > +8. Invoke kernel panic on core 2:: > + > #echo 1 > /proc/sys/kernel/panic > #taskset -c 2 echo c > /proc/sysrq-trigger > > -9. From rebooted kernel or crashdump kernel, read crashdata > +9. From rebooted kernel or crashdump kernel, read crashdata:: > > #dd if=/dev/crash_tmc_etr0 of=/trace/cstrace.bin Ack. > > Thanks. > > -- > An old man doll... just what I always wanted! - Clara Linu Cherian.

1 year, 3 months

[PATCH v2 0/7] perf: cs-etm: Coresight decode and disassembly improvements

by James Clark

A set of changes that came out of the issues reported here [1]. * First 2 patches fix a decode bug in Perf and add support for new consistency checks in OpenCSD * The remaining ones make the disassembly script easier to test and use. This also involves adding a new Python binding to Perf to get a config value (perf_config_get()) [1]: https://lore.kernel.org/linux-arm-kernel/20240719092619.274730-1-gankulkarn… Changes since V1: * Keep the flush function for discontinuities * Still remove the flush when the buffer fills, but now add cs_etm__end_block() for the end trace. That way we won't drop the last branch stack if the instruction sample period wasn't hit at the very end. James Clark (7): perf cs-etm: Don't flush when packet_queue fills up perf cs-etm: Use new OpenCSD consistency checks perf scripting python: Add function to get a config value perf scripts python cs-etm: Update to use argparse perf scripts python cs-etm: Improve arguments perf scripts python cs-etm: Add start and stop arguments perf test: cs-etm: Test Coresight disassembly script .../perf/Documentation/perf-script-python.txt | 2 +- .../scripts/python/Perf-Trace-Util/Context.c | 11 ++ .../scripts/python/arm-cs-trace-disasm.py | 109 +++++++++++++----- .../tests/shell/test_arm_coresight_disasm.sh | 63 ++++++++++ tools/perf/util/config.c | 22 ++++ tools/perf/util/config.h | 1 + .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 7 +- tools/perf/util/cs-etm.c | 25 ++-- 8 files changed, 205 insertions(+), 35 deletions(-) create mode 100755 tools/perf/tests/shell/test_arm_coresight_disasm.sh -- 2.34.1

1 year, 3 months

[PATCH v3 0/7] perf: cs-etm: Coresight decode and disassembly improvements

by James Clark

A set of changes that came out of the issues reported here [1]. * First 2 patches fix a decode bug in Perf and add support for new consistency checks in OpenCSD * The remaining ones make the disassembly script easier to test and use. This also involves adding a new Python binding to Perf to get a config value (perf_config_get()) [1]: https://lore.kernel.org/linux-arm-kernel/20240719092619.274730-1-gankulkarn… Changes since V2: * Check validity of start stop arguments * Make test work if Perf was installed * Document that start and stop time are monotonic clock values Changes since V1: * Keep the flush function for discontinuities * Still remove the flush when the buffer fills, but now add cs_etm__end_block() for the end trace. That way we won't drop the last branch stack if the instruction sample period wasn't hit at the very end. James Clark (7): perf cs-etm: Don't flush when packet_queue fills up perf cs-etm: Use new OpenCSD consistency checks perf scripting python: Add function to get a config value perf scripts python cs-etm: Update to use argparse perf scripts python cs-etm: Improve arguments perf scripts python cs-etm: Add start and stop arguments perf test: cs-etm: Test Coresight disassembly script .../perf/Documentation/perf-script-python.txt | 2 +- .../scripts/python/Perf-Trace-Util/Context.c | 11 ++ .../scripts/python/arm-cs-trace-disasm.py | 127 ++++++++++++++---- .../tests/shell/test_arm_coresight_disasm.sh | 65 +++++++++ tools/perf/util/config.c | 22 +++ tools/perf/util/config.h | 1 + .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 7 +- tools/perf/util/cs-etm.c | 25 +++- 8 files changed, 225 insertions(+), 35 deletions(-) create mode 100755 tools/perf/tests/shell/test_arm_coresight_disasm.sh -- 2.34.1

1 year, 3 months

Re: [PATCH v2 7/7] perf test: cs-etm: Test Coresight disassembly script

by James Clark

On 13/09/2024 14:35, Leo Yan wrote: > > > On 9/12/24 16:11, James Clark wrote: >> >> Run a few samples through the disassembly script and check to see that >> at least one branch instruction is printed. >> >> Signed-off-by: James Clark <james.clark(a)linaro.org> >> --- >> .../tests/shell/test_arm_coresight_disasm.sh | 63 +++++++++++++++++++ >> 1 file changed, 63 insertions(+) >> create mode 100755 tools/perf/tests/shell/test_arm_coresight_disasm.sh >> >> diff --git a/tools/perf/tests/shell/test_arm_coresight_disasm.sh >> b/tools/perf/tests/shell/test_arm_coresight_disasm.sh >> new file mode 100755 >> index 000000000000..6d004bf29f80 >> --- /dev/null >> +++ b/tools/perf/tests/shell/test_arm_coresight_disasm.sh >> @@ -0,0 +1,63 @@ >> +#!/bin/sh >> +# Check Arm CoreSight disassembly script completes without errors >> +# SPDX-License-Identifier: GPL-2.0 >> + >> +# The disassembly script reconstructs ranges of instructions and >> gives these to objdump to >> +# decode. objdump doesn't like ranges that go backwards, but these >> are a good indication >> +# that decoding has gone wrong either in OpenCSD, Perf or in the >> range reconstruction in >> +# the script. Test all 3 parts are working correctly by running the >> script. >> + >> +skip_if_no_cs_etm_event() { >> + perf list | grep -q 'cs_etm//' && return 0 >> + >> + # cs_etm event doesn't exist >> + return 2 >> +} >> + >> +skip_if_no_cs_etm_event || exit 2 >> + >> +# Assume an error unless we reach the very end >> +set -e >> +glb_err=1 >> + >> +perfdata_dir=$(mktemp -d /tmp/__perf_test.perf.data.XXXXX) >> +perfdata=${perfdata_dir}/perf.data >> +file=$(mktemp /tmp/temporary_file.XXXXX) >> + >> +cleanup_files() >> +{ >> + set +e >> + rm -rf ${perfdata_dir} >> + rm -f ${file} >> + trap - EXIT TERM INT >> + exit $glb_err >> +} >> + >> +trap cleanup_files EXIT TERM INT >> + >> +# Ranges start and end on branches, so check for some likely branch >> instructions >> +sep="\s\|\s" >> +branch_search="\sbl${sep}b${sep}b.ne${sep}b.eq${sep}cbz\s" >> + >> +## Test kernel ## >> +if [ -e /proc/kcore ]; then >> + echo "Testing kernel disassembly" >> + perf record -o ${perfdata} -e cs_etm//k --kcore -- touch $file >> > /dev/null 2>&1 >> + perf script -i ${perfdata} -s >> python:tools/perf/scripts/python/arm-cs-trace-disasm.py -- \ >> + -d --stop-sample=30 2> /dev/null > ${file} > > This is fine for self test. But for a CI test in a distro, will it fail to > find script with prefix 'tools/perf/...'? > > Thanks, > Leo > Nice catch, it should be this: # Relative path works whether it's installed or running from repo script_path=$(dirname "$0")/../../scripts/python/arm-cs-trace\ -disasm.py

1 year, 3 months

Re: [PATCH v2 6/7] perf scripts python cs-etm: Add start and stop arguments

by James Clark

On 13/09/2024 14:20, Leo Yan wrote: > On 9/12/24 16:11, James Clark wrote:> >> Make it possible to only disassemble a range of timestamps or sample >> indexes. This will be used by the test to limit the runtime, but it's >> also useful for users. >> >> Signed-off-by: James Clark <james.clark(a)linaro.org> >> --- >> .../scripts/python/arm-cs-trace-disasm.py | 22 +++++++++++++++++-- >> 1 file changed, 20 insertions(+), 2 deletions(-) >> >> diff --git a/tools/perf/scripts/python/arm-cs-trace-disasm.py >> b/tools/perf/scripts/python/arm-cs-trace-disasm.py >> index 02e957d037ea..a097995d8e7b 100755 >> --- a/tools/perf/scripts/python/arm-cs-trace-disasm.py >> +++ b/tools/perf/scripts/python/arm-cs-trace-disasm.py >> @@ -55,6 +55,11 @@ args.add_argument("-k", "--vmlinux", >> args.add_argument("-d", "--objdump", nargs="?", >> const=default_objdump(), >> help="Show disassembly. Can also be used to change >> the objdump path"), >> args.add_argument("-v", "--verbose", action="store_true", >> help="Enable debugging log") >> +args.add_argument("--start-time", type=int, help="Time of sample to >> start from") >> +args.add_argument("--stop-time", type=int, help="Time of sample to >> stop at") >> +args.add_argument("--start-sample", type=int, help="Index of sample >> to start from") >> +args.add_argument("--stop-sample", type=int, help="Index of sample to >> stop at") >> + > > It is good to validate the ranges for time and sample indexes, in case > the user passes unexpected values and can directly report the error. > > BTW, I think it is good to clarify the time is based on monotonic clock > but not wall-clock time. > > With above changes, LGTM: > > Reviewed-by: Leo Yan <leo.yan(a)arm.com> > Yep makes sense, I can add that >> options = args.parse_args() >> >> # Initialize global dicts and regular expression >> @@ -63,6 +68,7 @@ cpu_data = dict() >> disasm_re = re.compile(r"^\s*([0-9a-fA-F]+):") >> disasm_func_re = re.compile(r"^\s*([0-9a-fA-F]+)\s.*:") >> cache_size = 64*1024 >> +sample_idx = -1 >> >> glb_source_file_name = None >> glb_line_number = None >> @@ -151,10 +157,10 @@ def print_disam(dso_fname, dso_start, >> start_addr, stop_addr): >> >> def print_sample(sample): >> print("Sample = { cpu: %04d addr: 0x%016x phys_addr: 0x%016x >> ip: 0x%016x " \ >> - "pid: %d tid: %d period: %d time: %d }" % \ >> + "pid: %d tid: %d period: %d time: %d index: %d}" % \ >> (sample['cpu'], sample['addr'], sample['phys_addr'], \ >> sample['ip'], sample['pid'], sample['tid'], \ >> - sample['period'], sample['time'])) >> + sample['period'], sample['time'], sample_idx)) >> >> def trace_begin(): >> print('ARM CoreSight Trace Data Assembler Dump') >> @@ -216,6 +222,7 @@ def print_srccode(comm, param_dict, sample, >> symbol, dso): >> def process_event(param_dict): >> global cache_size >> global options >> + global sample_idx >> >> sample = param_dict["sample"] >> comm = param_dict["comm"] >> @@ -231,6 +238,17 @@ def process_event(param_dict): >> ip = sample["ip"] >> addr = sample["addr"] >> >> + sample_idx += 1 >> + >> + if (options.start_time and sample["time"] < options.start_time): >> + return >> + if (options.stop_time and sample["time"] > options.stop_time): >> + exit(0) >> + if (options.start_sample and sample_idx < options.start_sample): >> + return >> + if (options.stop_sample and sample_idx > options.stop_sample): >> + exit(0) >> + >> if (options.verbose == True): >> print("Event type: %s" % name) >> print_sample(sample) >> -- >> 2.34.1 >>

1 year, 3 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight