CoreSight

coresight@lists.linaro.org

3 participants
2526 discussions

Re: [PATCH V8 0/4] arm-cs-trace-disasm.py/perf must accommodate non-zero DSO text offset

by Steve Clevenger

Hello Namhyung, Sorry your question is so late. I don't include the ELF headers here, but the problem can be seen with a perf.data packet dump of user instruction trace capture. The problem is with the non-zero pgoff. The arm-cs-trace-disasm.py script was never passed pgoff information to adjust the start/end disassemble range passed to objdump. This patch distributes the fix between perf and the arm-cs-trace-disasm.py script. Here's a brief excerpt from an e-mail I sent to James Clark describing the patch before I submitted it. Regards, Steve C. ----------------------------------------------------------------- . . This e-mail is to document what I know and don’t know about the problem. The background is Fedora 38 introduced non-zero text offsets into common shared objects and executables (e.g. libc.so.6, etc.). If you were to ‘perf report --dump’ the perf.data of a user mode instruction trace on Fedora 37 and grep the PERF_RECORD_MMAP2 packets you’ll notice all zero values (@ 0) for shared binary and executable text offsets. Repeat the same for user trace collected on Fedora 38/39, and these text offsets show as non-zero. Fedora 37: 4294967295 18446744073709551615 0x8ac8 [0x78]: PERF_RECORD_MMAP2 2389577/2389577: [0xffff85124000(0x42000) @ 0 103:04 805306555 1941233998]: r-xp /usr/lib/ld-linux-aarch64.so.1 4294967295 18446744073709551615 0x8b40 [0x60]: PERF_RECORD_MMAP2 2389577/2389577: [0xffff85161000(0x1000) @ 0 00:00 0 0]: r-xp [vdso] 4294967295 18446744073709551615 0x8ba0 [0x68]: PERF_RECORD_MMAP2 2389577/2389577: [0xaaaab09b0000(0x10000) @ 0 103:04 1140851919 994218038]: r-xp /usr/bin/dd 4294967295 18446744073709551615 0x8c08 [0x70]: PERF_RECORD_MMAP2 2389577/2389577: [0xffff84f70000(0x1a9000) @ 0 103:04 1677721733 3891973508]: r-xp /usr/lib64/libc.so.6 Fedora 39: 4294967295 18446744073709551615 0x8ac8 [0x78]: PERF_RECORD_MMAP2 18229/18229: [0xffffa5512000(0x1d000) @ 0x10000 103:04 161 4093340249]: r-xp /usr/lib/ld-linux-aarch64.so.1 4294967295 18446744073709551615 0x8b40 [0x60]: PERF_RECORD_MMAP2 18229/18229: [0xffffa554f000(0x1000) @ 0 00:00 0 0]: r-xp [vdso] 4294967295 18446744073709551615 0x8ba0 [0x68]: PERF_RECORD_MMAP2 18229/18229: [0xaaaade7e0000(0xb000) @ 0x10000 103:04 536876423 421616320]: r-xp /usr/bin/dd 4294967295 18446744073709551615 0x8c08 [0x70]: PERF_RECORD_MMAP2 18229/18229: [0xffffa5360000(0x11f000) @ 0x30000 103:04 536873199 2415801053]: r-xp /usr/lib64/libc.so.6 The arm-cs-trace-disasm.py script never gets to see the text offset into the dso binaries, so has no opportunity to adjust the start/end address range passed to objdump. This wasn’t a problem on Fedora 37 and below since there’s no start/end adjustment for a zero text offset. On Fedora 38/39 distros, the instruction trace shows unconditional branch instructions which do not branch to the target address, the clearest indication of trouble. ----------------------------------------------------------------- On 10/7/2024 10:51 PM, Namhyung Kim wrote: > Hello, > > Sorry for the long delay. But can you please explain your problem in > more detail? Showing ELF program (or section) header would be helpful > as well. > > Is the problem when the text mapping has non-zero pgoff only? Is the > kernel symbols working correctly? Or is it just the Python script > broken? > > Thanks, > Namhyung > > On Mon, Sep 09, 2024 at 03:30:02PM -0600, Steve Clevenger wrote: >> Changes in V8: >> - in arm-cs-trace-disasm.py, ensure map_pgoff is not converted to >> string. >> - Remove map_pgoff integer conversion in dso not found print >> message. >> >> Changes in V7: >> - In arm-cs-trace-disasm.py, fix print message core dump resulting >> from mixed type arithmetic. >> - Modify CS_ETM_TRACE_ON filter to filter zero start_addr. The >> CS_ETM_TRACE_ON message is changed to print only in verbose mode. >> - Removed verbose mode only notification for start_addr/stop_addr >> outside of dso address range. >> >> Changes in V6: >> - In arm-cs-trace-disasm.py, zero map_pgoff for kernel files. Add >> map_pgoff to start/end address for dso not found message. >> - Added "Reviewed-by" trailer for patches 1-3 previously reviewed >> by Leo Yan in V4 and V5. >> >> Changes in V5: >> - In symbol-elf.c, branch to exit_close label if open file. >> - In trace_event_python.c, correct indentation. set_sym_in_dict >> call parameter "map_pgoff" renamed as "addr_map_pgoff" to >> match local naming. >> >> Changes in V4: >> - In trace-event-python.c, fixed perf-tools-next merge problem. >> >> Changes in V3: >> - Rebased to linux-perf-tools branch. >> - Squash symbol-elf.c and symbol.h into same commit. >> - In map.c, merge dso__is_pie() call into existing if statement. >> - In arm-cs-trace-disasm.py, remove debug artifacts. >> >> Changes in V2: >> - In dso__is_pie() (symbol-elf.c), Decrease indentation, add null pointer >> checks per Leo Yan review. >> - Updated mailing list distribution. >> >> Steve Clevenger (4): >> Add dso__is_pie call to identify ELF PIE >> Force MAPPING_TYPE__IDENTIY for PIE >> Add map pgoff to python dictionary based on MAPPING_TYPE >> Adjust objdump start/end range per map pgoff parameter >> >> .../scripts/python/arm-cs-trace-disasm.py | 17 ++++-- >> tools/perf/util/map.c | 4 +- >> .../scripting-engines/trace-event-python.c | 13 +++- >> tools/perf/util/symbol-elf.c | 61 +++++++++++++++++++ >> tools/perf/util/symbol.h | 1 + >> 5 files changed, 86 insertions(+), 10 deletions(-) >> >> -- >> 2.44.0 >>

1 year

Re: [PATCH] coresight: etm4x: Fix PID tracing when perf is run in an init PID namespace

by Suzuki K Poulose

On 08/10/2024 07:52, Leo Yan wrote: > On 10/7/2024 9:05 PM, Leo Yan wrote: >> >> Hi Julien, >> >> On Wed, Sep 25, 2024 at 03:13:56PM +0200, Julien Meunier wrote: >>> The previous implementation limited the tracing capabilities when perf >>> was run in the init PID namespace, making it impossible to trace >>> applications in non-init PID namespaces. >>> >>> This update improves the tracing process by verifying the event owner. >>> This allows us to determine whether the user has the necessary >>> permissions to trace the application. >> >> The original commit aab473867fed is not for constraint permission. It is >> about PID namespace mismatching issue. >> >> E.g. Perf runs in non-root namespace, thus it records process info in the >> non-root PID namespace. On the other hand, Arm CoreSight traces PID for >> root namespace, as a result, it will lead mess when decoding. >> >> With this change, I am not convinced that Arm CoreSight can trace PID for >> non-root PID namespace. Seems to me, the concerned issue is still existed >> - it might cause PID mismatching issue between hardware trace data and >> Perf's process info. > > I thought again and found I was wrong with above conclusion. This patch is a > good fixing for the perf running in root namespace to profile programs in > non-root namespace. Sorry for noise. > > Maybe it is good to improve a bit comments to avoid confusion. See below. > > [...] > >>> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c >>> index bf01f01964cf..8365307b1aec 100644 >>> --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c >>> +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c >>> @@ -695,7 +695,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev, >>> >>> /* Only trace contextID when runs in root PID namespace */ > > We can claim the requirement for the *tool* running in root PID namespae. > > /* Only trace contextID when the tool runs in root PID namespace */ minor nit: I wouldn't call "tool". Let keep it "event owner". /* Only trace contextID when the event owner is in root PID namespace */ Julien, Please could you respin the patch with the comments addressed. Kind regards Suzuki > > >>> if ((attr->config & BIT(ETM_OPT_CTXTID)) && >>> - task_is_in_init_pid_ns(current)) >>> + task_is_in_init_pid_ns(event->owner)) >>> /* bit[6], Context ID tracing bit */ >>> config->cfg |= TRCCONFIGR_CID; >>> >>> @@ -710,7 +710,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev, >>> goto out; >>> } >>> /* Only trace virtual contextID when runs in root PID namespace */ > > Ditto. > > /* Only trace virtual contextID when the tool runs in root PID namespace */ > > With above change: > > Reviewed-by: Leo Yan <leo.yan(a)arm.com> > >>> - if (task_is_in_init_pid_ns(current)) >>> + if (task_is_in_init_pid_ns(event->owner)) >>> config->cfg |= TRCCONFIGR_VMID | TRCCONFIGR_VMIDOPT; >>> } >>> >>> -- >>> 2.34.1 >>> >>>

1 year

Re: [PATCH] coresight: etm4x: Fix PID tracing when perf is run in an init PID namespace

by Suzuki K Poulose

On 25/09/2024 14:13, Julien Meunier wrote: > The previous implementation limited the tracing capabilities when perf > was run in the init PID namespace, making it impossible to trace > applications in non-init PID namespaces. > > This update improves the tracing process by verifying the event owner. > This allows us to determine whether the user has the necessary > permissions to trace the application. > > Cc: stable(a)vger.kernel.org > Fixes: aab473867fed ("coresight: etm4x: Don't trace PID for non-root PID namespace") > Signed-off-by: Julien Meunier <julien.meunier(a)nokia.com> Thanks for the fix, I will queue this for v6.13 Suzuki > --- > drivers/hwtracing/coresight/coresight-etm4x-core.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c > index bf01f01964cf..8365307b1aec 100644 > --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c > +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c > @@ -695,7 +695,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev, > > /* Only trace contextID when runs in root PID namespace */ > if ((attr->config & BIT(ETM_OPT_CTXTID)) && > - task_is_in_init_pid_ns(current)) > + task_is_in_init_pid_ns(event->owner)) > /* bit[6], Context ID tracing bit */ > config->cfg |= TRCCONFIGR_CID; > > @@ -710,7 +710,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev, > goto out; > } > /* Only trace virtual contextID when runs in root PID namespace */ > - if (task_is_in_init_pid_ns(current)) > + if (task_is_in_init_pid_ns(event->owner)) > config->cfg |= TRCCONFIGR_VMID | TRCCONFIGR_VMIDOPT; > } >

1 year, 1 month

Re: [PATCH] perf: cs-etm: Fix the assert() to handle captured and unprocessed cpu trace

by Arnaldo Carvalho de Melo

On Wed, Sep 25, 2024 at 04:04:55PM -0700, Namhyung Kim wrote: > On Wed, Sep 25, 2024 at 10:54:31AM +0100, James Clark wrote: > > > > > > On 25/09/2024 12:39 am, Ilkka Koskinen wrote: > > > If one builds perf with DEBUG=1, captures data on multiple CPUs and > > > finally runs 'perf report -C <cpu>' for only one of the cpus, assert() > > > aborts the program. This happens because there are empty queues with > > > format set. This patch changes the condition to abort only if a queue > > > is not empty and if the format is unset. > > > > > > $ make -C tools/perf DEBUG=1 CORESIGHT=1 CSLIBS=/usr/lib CSINCLUDES=/usr/include install > > > $ perf record -o kcore --kcore -e cs_etm/timestamp/k -s -C 0-1 dd if=/dev/zero of=/dev/null bs=1M count=1 > > > $ perf report --input kcore/data --vmlinux=/home/ikoskine/projects/linux/vmlinux -C 1 > > > Aborted (core dumped) > > > > > > Fixes: 57880a7966be ("perf: cs-etm: Allocate queues for all CPUs") > > > Signed-off-by: Ilkka Koskinen <ilkka(a)os.amperecomputing.com> > > > --- > > > tools/perf/util/cs-etm.c | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c > > > index 90f32f327b9b..40f047baef81 100644 > > > --- a/tools/perf/util/cs-etm.c > > > +++ b/tools/perf/util/cs-etm.c > > > @@ -3323,7 +3323,7 @@ static int cs_etm__create_decoders(struct cs_etm_auxtrace *etm) > > > * Don't create decoders for empty queues, mainly because > > > * etmq->format is unknown for empty queues. > > > */ > > > - assert(empty == (etmq->format == UNSET)); > > > + assert(empty || etmq->format != UNSET); > > > if (empty) > > > continue; > > > > Oops I didn't realize you could filter on CPU in report mode. Thanks for the > > fix. Adding a test to the end of test_arm_coresight.sh might be quite > > useful. Either way: > > > > Reviewed-by: James Clark <james.clark(a)linaro.org> > > Thanks, it should go to the perf-tool. Arnaldo, please pick up. Right, picking it now. Thanks, - Arnaldo

1 year, 1 month

[PATCH v5 0/2] arm64: dts: qcom: sm8450: Add coresight nodes

by Mao Jinlong

Change since V4: 1. Use ^ete(-[0-9]+)?$ for the pattern of node name -- comments from Krzysztof Kozlowski <krzk(a)kernel.org> 2. Update commit message --- comments from Rob Herring <robh(a)kernel.org> Change since V3: 1. Use ^ete-[0-9]+$ for the pattern of node name -- comments from Rob Herring Change since V2: 1. Change the name in binding as 'ete'. Change since V1: 1. Remove the pattern match of ETE node name. 2. Update the tmc-etr node name in DT. Mao Jinlong (2): dt-bindings: arm: coresight: Update the pattern of ete node name arm64: dts: qcom: sm8450: Add coresight nodes .../arm/arm,embedded-trace-extension.yaml | 6 +- arch/arm64/boot/dts/qcom/sm8450.dtsi | 726 ++++++++++++++++++ 2 files changed, 729 insertions(+), 3 deletions(-) -- 2.46.0

1 year, 1 month

Re: [PATCH] perf: cs-etm: Fix the assert() to handle captured and unprocessed cpu trace

by James Clark

On 25/09/2024 12:39 am, Ilkka Koskinen wrote: > If one builds perf with DEBUG=1, captures data on multiple CPUs and > finally runs 'perf report -C <cpu>' for only one of the cpus, assert() > aborts the program. This happens because there are empty queues with > format set. This patch changes the condition to abort only if a queue > is not empty and if the format is unset. > > $ make -C tools/perf DEBUG=1 CORESIGHT=1 CSLIBS=/usr/lib CSINCLUDES=/usr/include install > $ perf record -o kcore --kcore -e cs_etm/timestamp/k -s -C 0-1 dd if=/dev/zero of=/dev/null bs=1M count=1 > $ perf report --input kcore/data --vmlinux=/home/ikoskine/projects/linux/vmlinux -C 1 > Aborted (core dumped) > > Fixes: 57880a7966be ("perf: cs-etm: Allocate queues for all CPUs") > Signed-off-by: Ilkka Koskinen <ilkka(a)os.amperecomputing.com> > --- > tools/perf/util/cs-etm.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c > index 90f32f327b9b..40f047baef81 100644 > --- a/tools/perf/util/cs-etm.c > +++ b/tools/perf/util/cs-etm.c > @@ -3323,7 +3323,7 @@ static int cs_etm__create_decoders(struct cs_etm_auxtrace *etm) > * Don't create decoders for empty queues, mainly because > * etmq->format is unknown for empty queues. > */ > - assert(empty == (etmq->format == UNSET)); > + assert(empty || etmq->format != UNSET); > if (empty) > continue; > Oops I didn't realize you could filter on CPU in report mode. Thanks for the fix. Adding a test to the end of test_arm_coresight.sh might be quite useful. Either way: Reviewed-by: James Clark <james.clark(a)linaro.org>

1 year, 1 month

Re: [PATCH v3 0/7] perf: cs-etm: Coresight decode and disassembly improvements

by James Clark

On 18/09/2024 12:23 pm, Ganapatrao Kulkarni wrote: > > Hi James, > > On 16-09-2024 07:27 pm, James Clark wrote: >> A set of changes that came out of the issues reported here [1]. >> >> * First 2 patches fix a decode bug in Perf and add support for new >> consistency checks in OpenCSD >> * The remaining ones make the disassembly script easier to test >> and use. This also involves adding a new Python binding to >> Perf to get a config value (perf_config_get()) >> >> [1]: >> https://lore.kernel.org/linux-arm-kernel/20240719092619.274730-1-gankulkarn… >> > > Tried this series with below commands and issue is not seen as reported > in [1]. > > record: > timeout 8s ./perf record -e cs_etm// -C 1 -o kcore --kcore dd > if=/dev/zero of=/dev/null > > decode: > ./perf script -i ./kcore -s scripts/python/arm-cs-trace-disasm.py -- -d > objdump -k kcore/kcore_dir/kcore > > ./perf script -i ./kcore -s scripts/python/arm-cs-trace-disasm.py -F > cpu,event,ip,addr,sym -- -d objdump -k kcore/kcore_dir/kcore > > Feel free to add for 1/7 and 2/7. > Tested-by: Ganapatrao Kulkarni <gankulkarni(a)os.amperecomputing.com> > Thanks for testing!

1 year, 1 month

Re: [PATCH v10 8/8] Documentation: coresight: Panic support

by Linu Cherian

Hi, On 2024-09-17 at 07:16:46, Bagas Sanjaya (bagasdotme(a)gmail.com) wrote: > On Mon, Sep 16, 2024 at 04:04:37PM +0530, Linu Cherian wrote: > > +3. On a kernel panic, all coresight blocks are disabled, necessary > > + metadata is synced by kernel panic handler. > "... and necessary metadata ..." > > + > > + System would eventually reboot or boot a crashdump kernel. > > + > > +4. For platforms that supports crashdump kernel, raw trace data can be > > + dumped using the coresight sysfs interface from the crashdump kernel > > + itself. Persistent RAM is not a requirement in this case. > > + > > +5. For platforms that supports persistent RAM, trace data can be dumped > > + using the coresight sysfs interface in the subsequent Linux boot. > > + Crashdump kernel is not a requirement in this case. Persistent RAM > > + ensures that trace data is intact across reboot. > > + > > +Coresight trace during Watchdog reset > > +------------------------------------- > > +The main difference between addressing the watchdog reset and kernel panic > > +case are below, > "... are:" > > +Sample commands for testing a Kernel panic case with ETR sink > > +------------------------------------------------------------- > > + > > +1. Boot Linux kernel with "crash_kexec_post_notifiers" added to the kernel > > + bootargs. This is mandatory if the user would like to read the tracedata > > + from the crashdump kernel. > > + > > +2. Enable the preloaded ETM configuration > > + > > + #echo 1 > /sys/kernel/config/cs-syscfg/configurations/panicstop/enable > > + > > +3. Configure CTI using sysfs interface:: > > + > > + #./cti_setup.sh > > + > > + #cat cti_setup.sh > > + > > + > > + cd /sys/bus/coresight/devices/ > > + > > + ap_cti_config () { > > + #ETM trig out[0] trigger to Channel 0 > > + echo 0 4 > channels/trigin_attach > > + } > > + > > + etf_cti_config () { > > + #ETF Flush in trigger from Channel 0 > > + echo 0 1 > channels/trigout_attach > > + echo 1 > channels/trig_filter_enable > > + } > > + > > + etr_cti_config () { > > + #ETR Flush in from Channel 0 > > + echo 0 1 > channels/trigout_attach > > + echo 1 > channels/trig_filter_enable > > + } > > + > > + ctidevs=`find . -name "cti*"` > > + > > + for i in $ctidevs > > + do > > + cd $i > > + > > + connection=`find . -name "ete*"` > > + if [ ! -z "$connection" ] > > + then > > + echo "AP CTI config for $i" > > + ap_cti_config > > + fi > > + > > + connection=`find . -name "tmc_etf*"` > > + if [ ! -z "$connection" ] > > + then > > + echo "ETF CTI config for $i" > > + etf_cti_config > > + fi > > + > > + connection=`find . -name "tmc_etr*"` > > + if [ ! -z "$connection" ] > > + then > > + echo "ETR CTI config for $i" > > + etr_cti_config > > + fi > > + > > + cd .. > > + done > > + > > +Note: CTI connections are SOC specific and hence the above script is > > +added just for reference. > > + > > +4. Choose reserved buffer mode for ETR buffer > > + #echo "resrv" > /sys/bus/coresight/devices/tmc_etr0/buf_mode_preferred > > + > > +5. Enable stop on flush trigger configuration > > + #echo 1 > /sys/bus/coresight/devices/tmc_etr0/stop_on_flush > > + > > +6. Start Coresight tracing on cores 1 and 2 using sysfs interface > > + > > +7. Run some application on core 1 > > + #taskset -c 1 dd if=/dev/urandom of=/dev/null & > > + > > +8. Invoke kernel panic on core 2 > > + #echo 1 > /proc/sys/kernel/panic > > + #taskset -c 2 echo c > /proc/sysrq-trigger > > + > > +9. From rebooted kernel or crashdump kernel, read crashdata > > + > > + #dd if=/dev/crash_tmc_etr0 of=/trace/cstrace.bin > > + > > +10. Run opencsd decoder tools/scripts to generate the instruction trace. > > Format all command lines as literal code blocks to be consistent: > > ---- >8 ---- > diff --git a/Documentation/trace/coresight/panic.rst b/Documentation/trace/coresight/panic.rst > index 3b53d91cace8fd..864f6c05b3f7af 100644 > --- a/Documentation/trace/coresight/panic.rst > +++ b/Documentation/trace/coresight/panic.rst > @@ -113,7 +113,7 @@ Sample commands for testing a Kernel panic case with ETR sink > bootargs. This is mandatory if the user would like to read the tracedata > from the crashdump kernel. > > -2. Enable the preloaded ETM configuration > +2. Enable the preloaded ETM configuration:: > > #echo 1 > /sys/kernel/config/cs-syscfg/configurations/panicstop/enable > > @@ -176,22 +176,26 @@ Sample commands for testing a Kernel panic case with ETR sink > Note: CTI connections are SOC specific and hence the above script is > added just for reference. > > -4. Choose reserved buffer mode for ETR buffer > +4. Choose reserved buffer mode for ETR buffer:: > + > #echo "resrv" > /sys/bus/coresight/devices/tmc_etr0/buf_mode_preferred > > -5. Enable stop on flush trigger configuration > +5. Enable stop on flush trigger configuration:: > + > #echo 1 > /sys/bus/coresight/devices/tmc_etr0/stop_on_flush > > 6. Start Coresight tracing on cores 1 and 2 using sysfs interface > > -7. Run some application on core 1 > +7. Run some application on core 1:: > + > #taskset -c 1 dd if=/dev/urandom of=/dev/null & > > -8. Invoke kernel panic on core 2 > +8. Invoke kernel panic on core 2:: > + > #echo 1 > /proc/sys/kernel/panic > #taskset -c 2 echo c > /proc/sysrq-trigger > > -9. From rebooted kernel or crashdump kernel, read crashdata > +9. From rebooted kernel or crashdump kernel, read crashdata:: > > #dd if=/dev/crash_tmc_etr0 of=/trace/cstrace.bin Ack. > > Thanks. > > -- > An old man doll... just what I always wanted! - Clara Linu Cherian.

1 year, 1 month

[PATCH v2 0/7] perf: cs-etm: Coresight decode and disassembly improvements

by James Clark

A set of changes that came out of the issues reported here [1]. * First 2 patches fix a decode bug in Perf and add support for new consistency checks in OpenCSD * The remaining ones make the disassembly script easier to test and use. This also involves adding a new Python binding to Perf to get a config value (perf_config_get()) [1]: https://lore.kernel.org/linux-arm-kernel/20240719092619.274730-1-gankulkarn… Changes since V1: * Keep the flush function for discontinuities * Still remove the flush when the buffer fills, but now add cs_etm__end_block() for the end trace. That way we won't drop the last branch stack if the instruction sample period wasn't hit at the very end. James Clark (7): perf cs-etm: Don't flush when packet_queue fills up perf cs-etm: Use new OpenCSD consistency checks perf scripting python: Add function to get a config value perf scripts python cs-etm: Update to use argparse perf scripts python cs-etm: Improve arguments perf scripts python cs-etm: Add start and stop arguments perf test: cs-etm: Test Coresight disassembly script .../perf/Documentation/perf-script-python.txt | 2 +- .../scripts/python/Perf-Trace-Util/Context.c | 11 ++ .../scripts/python/arm-cs-trace-disasm.py | 109 +++++++++++++----- .../tests/shell/test_arm_coresight_disasm.sh | 63 ++++++++++ tools/perf/util/config.c | 22 ++++ tools/perf/util/config.h | 1 + .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 7 +- tools/perf/util/cs-etm.c | 25 ++-- 8 files changed, 205 insertions(+), 35 deletions(-) create mode 100755 tools/perf/tests/shell/test_arm_coresight_disasm.sh -- 2.34.1

1 year, 1 month

[PATCH v3 0/7] perf: cs-etm: Coresight decode and disassembly improvements

by James Clark

A set of changes that came out of the issues reported here [1]. * First 2 patches fix a decode bug in Perf and add support for new consistency checks in OpenCSD * The remaining ones make the disassembly script easier to test and use. This also involves adding a new Python binding to Perf to get a config value (perf_config_get()) [1]: https://lore.kernel.org/linux-arm-kernel/20240719092619.274730-1-gankulkarn… Changes since V2: * Check validity of start stop arguments * Make test work if Perf was installed * Document that start and stop time are monotonic clock values Changes since V1: * Keep the flush function for discontinuities * Still remove the flush when the buffer fills, but now add cs_etm__end_block() for the end trace. That way we won't drop the last branch stack if the instruction sample period wasn't hit at the very end. James Clark (7): perf cs-etm: Don't flush when packet_queue fills up perf cs-etm: Use new OpenCSD consistency checks perf scripting python: Add function to get a config value perf scripts python cs-etm: Update to use argparse perf scripts python cs-etm: Improve arguments perf scripts python cs-etm: Add start and stop arguments perf test: cs-etm: Test Coresight disassembly script .../perf/Documentation/perf-script-python.txt | 2 +- .../scripts/python/Perf-Trace-Util/Context.c | 11 ++ .../scripts/python/arm-cs-trace-disasm.py | 127 ++++++++++++++---- .../tests/shell/test_arm_coresight_disasm.sh | 65 +++++++++ tools/perf/util/config.c | 22 +++ tools/perf/util/config.h | 1 + .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 7 +- tools/perf/util/cs-etm.c | 25 +++- 8 files changed, 225 insertions(+), 35 deletions(-) create mode 100755 tools/perf/tests/shell/test_arm_coresight_disasm.sh -- 2.34.1

1 year, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight