CoreSight

coresight@lists.linaro.org

4 participants
2727 discussions

[PATCH v2] perf: cs-etm: Update to build with latest opencsd version.

by Mike Leach

OpenCSD version v0.14.0 adds in a new output element. This is represented by a new value in the generic element type enum, which must be added to the handling code in perf cs-etm-decoder to prevent build errors due to build options on the perf project. This element is not currently used by the perf decoder. Perf build feature test updated to require a minimum of 0.14.0 Tested on Linux 5.7-rc3. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- tools/build/feature/test-libopencsd.c | 4 ++-- tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/build/feature/test-libopencsd.c b/tools/build/feature/test-libopencsd.c index 2b0e02c38870..1547bc2c0950 100644 --- a/tools/build/feature/test-libopencsd.c +++ b/tools/build/feature/test-libopencsd.c @@ -4,9 +4,9 @@ /* * Check OpenCSD library version is sufficient to provide required features */ -#define OCSD_MIN_VER ((0 << 16) | (11 << 8) | (0)) +#define OCSD_MIN_VER ((0 << 16) | (14 << 8) | (0)) #if !defined(OCSD_VER_NUM) || (OCSD_VER_NUM < OCSD_MIN_VER) -#error "OpenCSD >= 0.11.0 is required" +#error "OpenCSD >= 0.14.0 is required" #endif int main(void) diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c index cd92a99eb89d..cd007cc9c283 100644 --- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c @@ -564,6 +564,8 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( resp = cs_etm_decoder__set_tid(etmq, packet_queue, elem, trace_chan_id); break; + /* Unused packet types */ + case OCSD_GEN_TRC_ELEM_I_RANGE_NOPATH: case OCSD_GEN_TRC_ELEM_ADDR_NACC: case OCSD_GEN_TRC_ELEM_CYCLE_COUNT: case OCSD_GEN_TRC_ELEM_ADDR_UNKNOWN: -- 2.17.1

6 years, 6 months

[PATCH v2 0/2] Add CPU power management for CPU bound CTI devices.

by Mike Leach

Adds in power management for CPU bound CTI devices: i) CPU Hotplug - registers a new notifier for CPU start and stop events. ii) CPU idle PM event notifier to handle PM_ENTER, PM_ENTER_FAILED and PM_EXIT events. Tested with DB410c on Linux 5.7-rc3. Rebased onto coresight/next Changes since V1: (requested by Mathieu). 1) Split into separate patches for CPU pm and CPU hotplug handling. 2) Enable on hotplug has a specific function to enable the hardware, while leaving the enable reference counts unchanged. Mike Leach (2): coresight: cti: Add CPU Hotplug handling to CTI driver. coresight: cti: Add CPU idle pm notifer to CTI devices. drivers/hwtracing/coresight/coresight-cti.c | 173 ++++++++++++++++++++ include/linux/cpuhotplug.h | 1 + 2 files changed, 174 insertions(+) -- 2.17.1

6 years, 6 months

[PATCH 86/91] perf: cs-etm: Update to build with latest opencsd version.

by Arnaldo Carvalho de Melo

From: Mike Leach <mike.leach(a)linaro.org> OpenCSD version v0.14.0 adds in a new output element. This is represented by a new value in the generic element type enum, which must be added to the handling code in perf cs-etm-decoder to prevent build errors due to build options on the perf project. This element is not currently used by the perf decoder. Perf build feature test updated to require a minimum of 0.14.0 Tested on Linux 5.7-rc3. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Reviewed-by: Leo Yan <leo.yan(a)linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Suzuki Poulouse <suzuki.poulose(a)arm.com> Cc: coresight(a)lists.linaro.org Cc: linux-arm-kernel(a)lists.infradead.org Link: http://lore.kernel.org/lkml/20200501143615.1180-1-mike.leach@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> --- tools/build/feature/test-libopencsd.c | 4 ++-- tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/build/feature/test-libopencsd.c b/tools/build/feature/test-libopencsd.c index 2b0e02c38870..1547bc2c0950 100644 --- a/tools/build/feature/test-libopencsd.c +++ b/tools/build/feature/test-libopencsd.c @@ -4,9 +4,9 @@ /* * Check OpenCSD library version is sufficient to provide required features */ -#define OCSD_MIN_VER ((0 << 16) | (11 << 8) | (0)) +#define OCSD_MIN_VER ((0 << 16) | (14 << 8) | (0)) #if !defined(OCSD_VER_NUM) || (OCSD_VER_NUM < OCSD_MIN_VER) -#error "OpenCSD >= 0.11.0 is required" +#error "OpenCSD >= 0.14.0 is required" #endif int main(void) diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c index cd92a99eb89d..cd007cc9c283 100644 --- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c @@ -564,6 +564,8 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( resp = cs_etm_decoder__set_tid(etmq, packet_queue, elem, trace_chan_id); break; + /* Unused packet types */ + case OCSD_GEN_TRC_ELEM_I_RANGE_NOPATH: case OCSD_GEN_TRC_ELEM_ADDR_NACC: case OCSD_GEN_TRC_ELEM_CYCLE_COUNT: case OCSD_GEN_TRC_ELEM_ADDR_UNKNOWN: -- 2.21.1

6 years, 6 months

KASAN use-after-free bug and a warning in etm4_cpu_pm_notify() with "arm,coresight-loses-context-with-cpu"

by Sai Prakash Ranjan

Hi, Since adding "arm,coresight-loses-context-with-cpu" property, have been seeing warnings during boot on QCOM SC7180, one is the kasan use-after-free warning in etm4_cpu_pm_notify() and the other warning also in etm4_cpu_pm_notify(). 1) KASAN use-after-free bug in etm4_cpu_pm_notify(): [ 8.574566] coresight etm0: CPU0: ETM v4.2 initialized [ 8.581920] BUG: KASAN: use-after-free in etm4_cpu_pm_notify+0x580/0x2024 [ 8.581925] Read of size 8 at addr ffffff813304f8c8 by task swapper/3/0 [ 8.581927] [ 8.581934] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G S W 5.4.28 #314 [ 8.587775] coresight etm1: CPU1: ETM v4.2 initialized [ 8.594195] Call trace: [ 8.594205] dump_backtrace+0x0/0x188 [ 8.594209] show_stack+0x20/0x2c [ 8.594216] dump_stack+0xdc/0x144 [ 8.594227] print_address_description+0x3c/0x494 [ 8.594232] __kasan_report+0x144/0x168 [ 8.601598] coresight etm2: CPU2: ETM v4.2 initialized [ 8.602563] kasan_report+0x10/0x18 [ 8.602568] check_memory_region+0x1a4/0x1b4 [ 8.602572] __kasan_check_read+0x18/0x24 [ 8.602577] etm4_cpu_pm_notify+0x580/0x2024 [ 8.665945] notifier_call_chain+0x5c/0x90 [ 8.670166] __atomic_notifier_call_chain+0x90/0xf8 [ 8.675182] cpu_pm_notify+0x40/0x6c [ 8.678858] cpu_pm_enter+0x38/0x80 [ 8.682451] psci_enter_idle_state+0x34/0x70 [ 8.686844] cpuidle_enter_state+0xb8/0x20c [ 8.691143] cpuidle_enter+0x38/0x4c [ 8.694820] call_cpuidle+0x3c/0x68 [ 8.698408] do_idle+0x1a0/0x280 [ 8.701729] cpu_startup_entry+0x24/0x28 [ 8.705768] secondary_start_kernel+0x15c/0x170 [ 8.710423] [ 8.711972] Allocated by task 242: [ 8.715473] __kasan_kmalloc+0xf0/0x1ac [ 8.719426] kasan_slab_alloc+0x14/0x1c [ 8.723375] __kmalloc_track_caller+0x23c/0x388 [ 8.728040] devm_kmalloc+0x38/0x94 [ 8.731632] etm4_probe+0x48/0x3c8 [ 8.735140] amba_probe+0xbc/0x158 [ 8.738645] really_probe+0x144/0x408 [ 8.742412] driver_probe_device+0x70/0x140 [ 8.746716] __device_attach_driver+0x9c/0x110 [ 8.751287] bus_for_each_drv+0x90/0xd8 [ 8.755236] __device_attach+0xb4/0x164 [ 8.759188] device_initial_probe+0x20/0x2c [ 8.763490] bus_probe_device+0x34/0x94 [ 8.767436] device_add+0x34c/0x3e0 [ 8.771029] amba_device_try_add+0x68/0x440 [ 8.775332] amba_deferred_retry_func+0x48/0xc8 [ 8.779997] process_one_work+0x344/0x648 [ 8.784127] worker_thread+0x2ac/0x47c [ 8.787987] kthread+0x128/0x138 [ 8.791313] ret_from_fork+0x10/0x18 [ 8.794993] [ 8.796532] Freed by task 242: [ 8.799684] __kasan_slab_free+0x15c/0x22c [ 8.803897] kasan_slab_free+0x10/0x1c [ 8.807761] kfree+0x25c/0x4bc [ 8.810913] release_nodes+0x240/0x2b0 [ 8.814767] devres_release_all+0x3c/0x54 [ 8.818887] really_probe+0x178/0x408 [ 8.822661] driver_probe_device+0x70/0x140 [ 8.826963] __device_attach_driver+0x9c/0x110 [ 8.831539] bus_for_each_drv+0x90/0xd8 [ 8.835487] __device_attach+0xb4/0x164 [ 8.839431] device_initial_probe+0x20/0x2c [ 8.843732] bus_probe_device+0x34/0x94 [ 8.847678] device_add+0x34c/0x3e0 [ 8.851274] amba_device_try_add+0x68/0x440 [ 8.855576] amba_deferred_retry_func+0x48/0xc8 [ 8.860240] process_one_work+0x344/0x648 [ 8.864366] worker_thread+0x2ac/0x47c [ 8.868228] kthread+0x128/0x138 [ 8.871557] ret_from_fork+0x10/0x18 [ 8.875231] [ 8.876782] The buggy address belongs to the object at ffffff813304f800 [ 8.876782] which belongs to the cache kmalloc-1k of size 1024 [ 8.889632] The buggy address is located 200 bytes inside of [ 8.889632] 1024-byte region [ffffff813304f800, ffffff813304fc00) [ 8.901761] The buggy address belongs to the page: [ 8.906695] page:ffffffff04ac1200 refcount:1 mapcount:0 mapping:ffffff8146c03800 index:0x0 compound_mapcount: 0 [ 8.917047] flags: 0x4000000000010200(slab|head) [ 8.921799] raw: 4000000000010200 dead000000000100 dead000000000122 ffffff8146c03800 [ 8.929753] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 [ 8.937703] page dumped because: kasan: bad access detected [ 8.943433] [ 8.944974] Memory state around the buggy address: [ 8.949903] ffffff813304f780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 8.957320] ffffff813304f800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.964742] >ffffff813304f880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.972157] ^ [ 8.977886] ffffff813304f900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.985298] ffffff813304f980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.992713] ================================================================== [ 9.000577] coresight etm3: CPU3: ETM v4.2 initialized [ 9.006385] coresight etm4: CPU4: ETM v4.2 initialized [ 9.012203] coresight etm5: CPU5: ETM v4.2 initialized [ 9.018126] coresight etm6: CPU6: ETM v4.2 initialized [ 9.023906] coresight etm7: CPU7: ETM v4.2 initialized 2) WARN_ON_ONCE(drvdata->cpu != cpu) in etm4_cpu_pm_notify(): 6.219155] WARNING: CPU: 3 PID: 0 at v5.4/drivers/hwtracing/coresight/coresight-etm4x.c:1347 etm4_cpu_pm_notify+0x1708/0x1c24 [ 6.219156] Modules linked in: [ 6.219163] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G S 5.4.35 #1 [ 6.219168] pstate: 20c00089 (nzCv daIf +PAN +UAO) [ 6.219171] pc : etm4_cpu_pm_notify+0x1708/0x1c24 [ 6.219176] lr : notifier_call_chain+0x58/0x90 [ 6.219178] sp : ffffffc010213d80 [ 6.219179] x29: ffffffc010213d90 x28: 0000000000000000 [ 6.219182] x27: ffffffe5b7106138 x26: ffffffe5b7412000 [ 6.219185] x25: ffffffe5b7412148 x24: 0000000000000001 [ 6.219188] x23: 0000000000000000 x22: 6b6b6b6b6b6b6b6b [ 6.219191] x21: 0000000000000002 x20: 0000000000000002 [ 6.219194] x19: ffffff816d8a1080 x18: 0000000000000000 [ 6.219197] x17: 0000000000000000 x16: 0000000000000000 [ 6.219200] x15: 0000000000000000 x14: ffffff8175f164c0 [ 6.219203] x13: ffffff8001d39000 x12: 00000000000000f0 [ 6.219206] x11: 0000000000000020 x10: 00000000ffffffff [ 6.219208] x9 : 0000000070732f69 x8 : 0000000000000003 [ 6.219211] x7 : 000000b2b5593519 x6 : 00000000003033ff [ 6.219214] x5 : 0000000000000000 x4 : 0000000000000700 [ 6.219217] x3 : 00000000ffffffff x2 : 0000000000000000 [ 6.219219] x1 : 0000000000000002 x0 : ffffffe5b74f2a28 [ 6.219223] Call trace: [ 6.219226] etm4_cpu_pm_notify+0x1708/0x1c24 [ 6.219228] notifier_call_chain+0x58/0x90 [ 6.219231] __atomic_notifier_call_chain+0x48/0x68 [ 6.219236] cpu_pm_notify+0x40/0x6c [ 6.219239] cpu_pm_exit+0x1c/0x24 [ 6.219242] psci_enter_idle_state+0x4c/0x70 [ 6.219246] cpuidle_enter_state+0xb8/0x204 [ 6.219249] cpuidle_enter+0x38/0x4c [ 6.219254] do_idle+0x1a4/0x2a8 [ 6.219257] cpu_startup_entry+0x24/0x28 [ 6.219262] secondary_start_kernel+0x148/0x154 [ 6.219264] ---[ end trace 41dac5fc09746c13 ]--- Thanks, Sai -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

6 years, 6 months

OpenCSD library for a Multi-Threaded application

by subhasish Karmakar

Hi, Can I use OpenCSD library in a Multi-Threaded application? I maintain decode tree handle per thread. Code Example:/********* Initialization code *********/ ------------------------------ //dcdtree_handle_ and p_context is maintained per thread dcdtree_handle_ = ocsd_create_dcd_tree(OCSD_TRC_SRC_FRAME_FORMATTED, OCSD_DFRMTR_FRAME_MEM_ALIGN); ret = ocsd_dt_create_decoder(dcdtree_handle_, p_name, OCSD_CREATE_FLG_FULL_DECODER, p_cfg, &CSID); ret = ocsd_dt_attach_packet_callback( dcdtree_handle_, CSID, OCSD_C_API_CB_PKT_MON, (void *)packetMonitorCallBack, p_context); ret = ocsd_dt_set_gen_elem_outfn( dcdtree_handle_, genTraceElemCallBack, p_context); ------------------------------ /********* Packet Processing *********/ ------------------------------ //Each thread uses below function to process incoming CoreSight packet while ((bytes_done < (uint32_t)block_size) && (ret == OCSD_OK)) { if (OCSD_DATA_RESP_IS_CONT(dp_ret)) { dp_ret = ocsd_dt_process_data( dcdtree_handle_, OCSD_OP_DATA, block_index + bytes_done, block_size - bytes_done, ((uint8_t *)p_block) + bytes_done, &bytes_this_time); //Example code from ------------------------------ Kindly respond to my query. Thank you, Subhasish

6 years, 6 months

[PATCH] coresight: etm4x: Add support for Neoverse N1 ETM

by Anurag Koul

Add PID for Arm Neoverse N1 ETM to the list of supported/known ETMs. Signed-off-by: Anurag Koul <anurag.koul(a)arm.com> --- drivers/hwtracing/coresight/coresight-etm4x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index 0b2c7c7efacb..7443a2e4528d 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -1541,6 +1541,7 @@ static const struct amba_id etm4_ids[] = { CS_AMBA_ID(0x000bb95a), /* Cortex-A72 */ CS_AMBA_ID(0x000bb959), /* Cortex-A73 */ CS_AMBA_UCI_ID(0x000bb9da, uci_id_etm4),/* Cortex-A35 */ + CS_AMBA_UCI_ID(0x000bbd0c, uci_id_etm4),/* Neoverse N1 */ CS_AMBA_UCI_ID(0x000f0205, uci_id_etm4),/* Qualcomm Kryo */ CS_AMBA_UCI_ID(0x000f0211, uci_id_etm4),/* Qualcomm Kryo */ CS_AMBA_UCI_ID(0x000bb802, uci_id_etm4),/* Qualcomm Kryo 385 Cortex-A55 */ -- 2.17.1

6 years, 6 months

[RFC PATCH 0/5] Allow CoreSight to specify and select default sink

by Mike Leach

This patchset provides a proposed infrastructure to allow for the automatic selection of a sink during CoreSight tracing operations. Currently starting tracing using perf requires a sink selection on the command line:- sudo ./perf record -e cs_etm/@tmc_etr0/ --per-thread uname -a After this set the infrastructure will be able to select a default sink:- sudo ./perf record -e cs_etm// --per-thread uname -a This matches with the default operation provided with perf and intelpt. The CoreSight infrastructure is updated to allow the concept of a "principal sink". For any given source there could be multiple possible sinks available for selection. However, there are no good programmatic ways to determine the optimal sink for a given topolgy. For any given rule (e.g. first sink found, first ETR, last ETR), there exists a possible platform / topology that will not be suitable. Therefore, we select the principal sink using a property in the device tree. This allows the routine to select the best possible for the situation. The only rule for selecting such sinks, is that there should only be one principal sink marked for any given source, across all possible paths from that source to any sinks. (if this rule is violated then the first found will be used) Therefore to select a sink, we start with the source, and walk the child connections until a sink marked as a principal sink is found. Applied to Linux 5.7-rc1 (with dts updates 1,2), tested on Juno / DB410 Note A: Moving forward to topologies which have groups of sources going to dedicated sinks e.g. multisocket / multicluster where each socket / cluster has a sink, then multiple sinks can be marked as principal sink, one for each cluster. The same applies to 1:1 ETM:sink topolgy were each sink will be marked. Note B: The current set does not auto-select when using sysfs, but I believe this could easily be added. [1] https://lists.linaro.org/pipermail/coresight/2020-April/003819.html [2] https://lists.linaro.org/pipermail/coresight/2020-April/003821.html Mike Leach (5): coresight: Add principal sink handling to CoreSight base coresight: tmc: Add principal sink attribute detection coresight: etm: perf: Add default sink selection to etm perf perf: cs-etm: Allow no CoreSight sink to be specified on command line dt-bindings: arm: qcom: Add CoreSight principal sink select parameters arch/arm64/boot/dts/arm/juno-base.dtsi | 1 + arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 + .../hwtracing/coresight/coresight-etm-perf.c | 20 +++++++++-- drivers/hwtracing/coresight/coresight-priv.h | 2 ++ drivers/hwtracing/coresight/coresight-tmc.c | 9 +++++ drivers/hwtracing/coresight/coresight.c | 34 +++++++++++++++++++ include/linux/coresight.h | 7 ++++ tools/perf/arch/arm/util/cs-etm.c | 6 ++-- 8 files changed, 74 insertions(+), 6 deletions(-) -- 2.17.1

6 years, 6 months

[PATCH] coresight: cti: Add power management to CTI driver

by Mike Leach

Add in CPU hotplug and CPU idle power management handling to CTI driver. Only CPU bound CTIs will register with the PM routines, to enable PM of CTI alongside PM of ETM devices. Need separate HP PM event CPUHP_AP_ARM_CORESIGHT_CTI_STARTING as events can only be registered once. Applies to Linux 5.7-rc1, tested on platforms Juno-r1 and DB410c. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- drivers/hwtracing/coresight/coresight-cti.c | 163 +++++++++++++++++++- include/linux/cpuhotplug.h | 1 + 2 files changed, 156 insertions(+), 8 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c index aa6e0249bd70..31996a20ce69 100644 --- a/drivers/hwtracing/coresight/coresight-cti.c +++ b/drivers/hwtracing/coresight/coresight-cti.c @@ -5,6 +5,7 @@ */ #include <linux/property.h> +#include <linux/cpu_pm.h> #include "coresight-cti.h" /** @@ -27,6 +28,12 @@ static DEFINE_MUTEX(ect_mutex); #define csdev_to_cti_drvdata(csdev) \ dev_get_drvdata(csdev->dev.parent) +/* power management handling */ +static int nr_cti_cpu; + +/* quick lookup list for CPU bound CTIs when power handling */ +static struct cti_drvdata *cti_cpu_drvdata[NR_CPUS]; + /* * CTI naming. CTI bound to cores will have the name cti_cpu<N> where * N is the CPU ID. System CTIs will have the name cti_sys<I> where I @@ -36,7 +43,7 @@ static DEFINE_MUTEX(ect_mutex); */ DEFINE_CORESIGHT_DEVLIST(cti_sys_devs, "cti_sys"); -/* write set of regs to hardware - call with spinlock claimed */ +/* write set of regs to hardware - call with spinlock claimed / cpu context */ void cti_write_all_hw_regs(struct cti_drvdata *drvdata) { struct cti_config *config = &drvdata->config; @@ -73,7 +80,7 @@ static void cti_enable_hw_smp_call(void *info) } /* write regs to hardware and enable */ -static int cti_enable_hw(struct cti_drvdata *drvdata) +static int cti_enable_hw(struct cti_drvdata *drvdata, bool hp_re_enable) { struct cti_config *config = &drvdata->config; struct device *dev = &drvdata->csdev->dev; @@ -82,8 +89,11 @@ static int cti_enable_hw(struct cti_drvdata *drvdata) pm_runtime_get_sync(dev->parent); spin_lock(&drvdata->spinlock); - /* no need to do anything if enabled or unpowered*/ - if (config->hw_enabled || !config->hw_powered) + /* no need to do anything if enabled or unpowered */ + if (!hp_re_enable) { + if (config->hw_enabled || !config->hw_powered) + goto cti_state_unchanged; + } else if (!atomic_read(&drvdata->config.enable_req_count)) goto cti_state_unchanged; /* claim the device */ @@ -91,7 +101,7 @@ static int cti_enable_hw(struct cti_drvdata *drvdata) if (rc) goto cti_err_not_enabled; - if (drvdata->ctidev.cpu >= 0) { + if (drvdata->ctidev.cpu >= 0 && !hp_re_enable) { rc = smp_call_function_single(drvdata->ctidev.cpu, cti_enable_hw_smp_call, drvdata, 1); @@ -102,12 +112,15 @@ static int cti_enable_hw(struct cti_drvdata *drvdata) } config->hw_enabled = true; - atomic_inc(&drvdata->config.enable_req_count); + if (!hp_re_enable) + atomic_inc(&drvdata->config.enable_req_count); + spin_unlock(&drvdata->spinlock); return rc; cti_state_unchanged: - atomic_inc(&drvdata->config.enable_req_count); + if (!hp_re_enable) + atomic_inc(&drvdata->config.enable_req_count); /* cannot enable due to error */ cti_err_not_enabled: @@ -563,12 +576,127 @@ static void cti_remove_conn_xrefs(struct cti_drvdata *drvdata) } } +/** cti PM callbacks **/ +static int cti_cpu_pm_notify(struct notifier_block *nb, unsigned long cmd, + void *v) +{ + struct cti_drvdata *drvdata; + unsigned int cpu = smp_processor_id(); + + if (!cti_cpu_drvdata[cpu]) + return NOTIFY_OK; + + drvdata = cti_cpu_drvdata[cpu]; + + if (WARN_ON_ONCE(drvdata->ctidev.cpu != cpu)) + return NOTIFY_BAD; + + switch (cmd) { + case CPU_PM_ENTER: + /* CTI regs all static - we have a copy & nothing to save */ + drvdata->config.hw_powered = false; + if (drvdata->config.hw_enabled) + coresight_disclaim_device(drvdata->base); + break; + + case CPU_PM_ENTER_FAILED: + drvdata->config.hw_powered = true; + if (drvdata->config.hw_enabled) { + if (coresight_claim_device(drvdata->base)) + drvdata->config.hw_enabled = false; + } + break; + + case CPU_PM_EXIT: + /* write hardware registers to re-enable. */ + drvdata->config.hw_powered = true; + drvdata->config.hw_enabled = false; + + /* check enable reference count to enable HW */ + if (atomic_read(&drvdata->config.enable_req_count)) { + /* check we can claim the device as we re-power */ + if (coresight_claim_device(drvdata->base)) + return NOTIFY_OK; + + drvdata->config.hw_enabled = true; + cti_write_all_hw_regs(drvdata); + } + break; + default: + return NOTIFY_DONE; + } + + return NOTIFY_OK; +} + +static struct notifier_block cti_cpu_pm_nb = { + .notifier_call = cti_cpu_pm_notify, +}; + +static int cti_cpu_pm_register(void) +{ + if (IS_ENABLED(CONFIG_CPU_PM)) + return cpu_pm_register_notifier(&cti_cpu_pm_nb); + + return 0; +} + +static void cti_cpu_pm_unregister(void) +{ + if (IS_ENABLED(CONFIG_CPU_PM)) + cpu_pm_unregister_notifier(&cti_cpu_pm_nb); +} + +/* CPU HP handlers */ +static int cti_starting_cpu(unsigned int cpu) +{ + struct cti_drvdata *drvdata = cti_cpu_drvdata[cpu]; + + if (!drvdata) + return 0; + + spin_lock(&drvdata->spinlock); + drvdata->config.hw_powered = true; + spin_unlock(&drvdata->spinlock); + + cti_enable_hw(drvdata, true); + return 0; +} + +static int cti_dying_cpu(unsigned int cpu) +{ + struct cti_drvdata *drvdata = cti_cpu_drvdata[cpu]; + + if (!drvdata) + return 0; + + spin_lock(&drvdata->spinlock); + drvdata->config.hw_powered = false; + coresight_disclaim_device(drvdata->base); + spin_unlock(&drvdata->spinlock); + return 0; +} + +/* release PM registrations */ +static void cti_pm_release(struct cti_drvdata *drvdata) +{ + if (drvdata->ctidev.cpu >= 0) { + if (--nr_cti_cpu == 0) { + cti_cpu_pm_unregister(); + + cpuhp_remove_state_nocalls( + CPUHP_AP_ARM_CORESIGHT_CTI_STARTING); + } + cti_cpu_drvdata[drvdata->ctidev.cpu] = NULL; + } +} + /** cti ect operations **/ int cti_enable(struct coresight_device *csdev) { struct cti_drvdata *drvdata = csdev_to_cti_drvdata(csdev); - return cti_enable_hw(drvdata); + return cti_enable_hw(drvdata, false); } int cti_disable(struct coresight_device *csdev) @@ -598,6 +726,7 @@ static void cti_device_release(struct device *dev) mutex_lock(&ect_mutex); cti_remove_conn_xrefs(drvdata); + cti_pm_release(drvdata); /* remove from the list */ list_for_each_entry_safe(ect_item, ect_tmp, &ect_net, node) { @@ -673,6 +802,23 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id) goto err_out; } + /* setup CPU power management handling for CPU bound CTI devices. */ + if (drvdata->ctidev.cpu >= 0) { + cti_cpu_drvdata[drvdata->ctidev.cpu] = drvdata; + if (!nr_cti_cpu++) { + cpus_read_lock(); + cpuhp_setup_state_nocalls_cpuslocked( + CPUHP_AP_ARM_CORESIGHT_CTI_STARTING, + "arm/coresight_cti:starting", + cti_starting_cpu, cti_dying_cpu); + + ret = cti_cpu_pm_register(); + cpus_read_unlock(); + if (ret) + goto err_out; + } + } + /* create dynamic attributes for connections */ ret = cti_create_cons_sysfs(dev, drvdata); if (ret) { @@ -711,6 +857,7 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id) return 0; err_out: + cti_pm_release(drvdata); return ret; } diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index 77d70b633531..6dc7332307ca 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -142,6 +142,7 @@ enum cpuhp_state { CPUHP_AP_ARM_XEN_STARTING, CPUHP_AP_ARM_KVMPV_STARTING, CPUHP_AP_ARM_CORESIGHT_STARTING, + CPUHP_AP_ARM_CORESIGHT_CTI_STARTING, CPUHP_AP_ARM64_ISNDEP_STARTING, CPUHP_AP_SMPCFD_DYING, CPUHP_AP_X86_TBOOT_DYING, -- 2.17.1

6 years, 6 months

[PATCH] dt-bindings: qcom: Add CTI options for qcom msm8916

by Mike Leach

Adds system and CPU bound CTI definitions for Qualcom msm8916 platform (Dragonboard DB410C). System CTIs 2-11 are omitted as no information available at present. Tested on Linux 5.7-rc1. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 85 +++++++++++++++++++++++++-- 1 file changed, 81 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index a88a15f2352b..194d5e45f4e5 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/reset/qcom,gcc-msm8916.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/arm/coresight-cti-dt.h> / { interrupt-parent = <&intc>; @@ -1424,7 +1425,7 @@ cpu = <&CPU3>; }; - etm@85c000 { + etm0: etm@85c000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x85c000 0x1000>; @@ -1443,7 +1444,7 @@ }; }; - etm@85d000 { + etm1: etm@85d000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x85d000 0x1000>; @@ -1462,7 +1463,7 @@ }; }; - etm@85e000 { + etm2: etm@85e000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x85e000 0x1000>; @@ -1481,7 +1482,7 @@ }; }; - etm@85f000 { + etm3: etm@85f000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x85f000 0x1000>; @@ -1500,6 +1501,82 @@ }; }; + /* System CTIs */ + /* CTI 0 - TMC connections */ + cti@810000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x810000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + }; + + /* CTI 1 - TPIU connections */ + cti@811000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x811000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + }; + + /* CTIs 2-11 - no information - not instantiated */ + + /* Core CTIs; CTIs 12-15 */ + /* CTI - CPU-0 */ + cti@858000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x858000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + arm,cs-dev-assoc = <&etm0>; + + }; + + /* CTI - CPU-1 */ + cti@859000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x859000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + arm,cs-dev-assoc = <&etm1>; + }; + + /* CTI - CPU-2 */ + cti@85a000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x85a000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + arm,cs-dev-assoc = <&etm2>; + }; + + /* CTI - CPU-3 */ + cti@85b000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x85b000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + arm,cs-dev-assoc = <&etm3>; + }; + + venus: video-codec@1d00000 { compatible = "qcom,msm8916-venus"; reg = <0x01d00000 0xff000>; -- 2.17.1

6 years, 6 months

[PATCH] perf: cs-etm: Update to build with latest opencsd version.

by Mike Leach

6 years, 6 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight