This series makes ETM TRCCCCTRL based 'cc_threshold' user configurable via the perf event attribute. But first, this implements an errata work around affecting ETM TRCIDR3.CCITMIN value on certain cpus, overriding the field.
This series applies on v6.5-rc6.
Cc: Catalin Marinas catalin.marinas@arm.com Cc: Will Deacon will@kernel.org Cc: Suzuki K Poulose suzuki.poulose@arm.com Cc: Mike Leach mike.leach@linaro.org Cc: James Clark james.clark@arm.com Cc: Leo Yan leo.yan@linaro.org Cc: Jonathan Corbet corbet@lwn.net Cc: linux-doc@vger.kernel.org Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org
Changes in V4:
- Fixed a typo s/rangess/ranges, - Renamed etm4_work_around_wrong_ccitmin() as etm4_core_reads_wrong_ccitmin() - Moved drvdata->ccitmin value check for 256 inside etm4_core_reads_wrong_ccitmin() - Moved the comment inside etm4_core_reads_wrong_ccitmin()
Changes in V3:
https://lore.kernel.org/all/20230811034600.944386-1-anshuman.khandual@arm.co...
- Added errata work around affecting TRCIDR3.CCITMIN - Split the document update into a separate patch
Changes in V2:
https://lore.kernel.org/all/20230808074533.380537-1-anshuman.khandual@arm.co...
- s/treshhold/threshold
Changes in V1:
https://lore.kernel.org/all/20230804044720.1478900-1-anshuman.khandual@arm.c...
Anshuman Khandual (3): coresight: etm: Override TRCIDR3.CCITMIN on errata affected cpus coresight: etm: Make cycle count threshold user configurable Documentation: coresight: Add cc_threshold tunable
Documentation/arch/arm64/silicon-errata.rst | 10 ++++ Documentation/trace/coresight/coresight.rst | 4 ++ .../hwtracing/coresight/coresight-etm-perf.c | 2 + .../coresight/coresight-etm4x-core.c | 48 ++++++++++++++++++- 4 files changed, 62 insertions(+), 2 deletions(-)
This work arounds errata 1490853 on Cortex-A76, and Neoverse-N1, errata 1491015 on Cortex-A77, errata 1502854 on Cortex-X1, and errata 1619801 on Neoverse-V1, based affected cpus, where software read for TRCIDR3.CCITMIN field in ETM gets an wrong value.
If software uses the value returned by the TRCIDR3.CCITMIN register field, then it will limit the range which could be used for programming the ETM. In reality, the ETM could be programmed with a much smaller value than what is indicated by the TRCIDR3.CCITMIN field and still function correctly.
If software reads the TRCIDR3.CCITMIN register field, corresponding to the instruction trace counting minimum threshold, observe the value 0x100 or a minimum cycle count threshold of 256. The correct value should be 0x4 or a minimum cycle count threshold of 4.
This work arounds the problem via storing 4 in drvdata->ccitmin on affected systems where the TRCIDR3.CCITMIN has been 256, thus preserving cycle count threshold granularity.
These errata information has been updated in arch/arm64/silicon-errata.rst, but without their corresponding configs because these have been implemented directly in the driver.
Cc: Catalin Marinas catalin.marinas@arm.com Cc: Will Deacon will@kernel.org Cc: Suzuki K Poulose suzuki.poulose@arm.com Cc: Mike Leach mike.leach@linaro.org Cc: James Clark james.clark@arm.com Cc: Jonathan Corbet corbet@lwn.net Cc: linux-doc@vger.kernel.org Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com --- Documentation/arch/arm64/silicon-errata.rst | 10 ++++++ .../coresight/coresight-etm4x-core.c | 36 +++++++++++++++++++ 2 files changed, 46 insertions(+)
diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst index bedd3a1d7b42..b08f33eda5f1 100644 --- a/Documentation/arch/arm64/silicon-errata.rst +++ b/Documentation/arch/arm64/silicon-errata.rst @@ -107,6 +107,10 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A76 | #1463225 | ARM64_ERRATUM_1463225 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A76 | #1490853 | N/A | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A77 | #1491015 | N/A | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A77 | #1508412 | ARM64_ERRATUM_1508412 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2051678 | ARM64_ERRATUM_2051678 | @@ -125,6 +129,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A715 | #2645198 | ARM64_ERRATUM_2645198 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-X1 | #1502854 | N/A | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-X2 | #2119858 | ARM64_ERRATUM_2119858 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-X2 | #2224489 | ARM64_ERRATUM_2224489 | @@ -133,6 +139,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N1 | #1349291 | N/A | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Neoverse-N1 | #1490853 | N/A | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N1 | #1542419 | ARM64_ERRATUM_1542419 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N2 | #2139208 | ARM64_ERRATUM_2139208 | @@ -141,6 +149,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N2 | #2253138 | ARM64_ERRATUM_2253138 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Neoverse-V1 | #1619801 | N/A | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | MMU-500 | #841119,826419 | N/A | +----------------+-----------------+-----------------+-----------------------------+ | ARM | MMU-600 | #1076982,1209401| N/A | diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 7e307022303a..591fab73ee79 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -1131,6 +1131,39 @@ static void cpu_detect_trace_filtering(struct etmv4_drvdata *drvdata) drvdata->trfcr = trfcr; }
+/* + * The following errata on applicable cpu ranges, affect the CCITMIN filed + * in TCRIDR3 register. Software read for the field returns 0x100 limiting + * the cycle threshold granularity, where as the right value should have + * been 0x4, which is well supported in the hardware. + */ +static struct midr_range etm_wrong_ccitmin_cpus[] = { + /* Erratum #1490853 - Cortex-A76 */ + MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 4, 0), + /* Erratum #1490853 - Neoverse-N1 */ + MIDR_RANGE(MIDR_NEOVERSE_N1, 0, 0, 4, 0), + /* Erratum #1491015 - Cortex-A77 */ + MIDR_RANGE(MIDR_CORTEX_A77, 0, 0, 1, 0), + /* Erratum #1502854 - Cortex-X1 */ + MIDR_REV(MIDR_CORTEX_X1, 0, 0), + /* Erratum #1619801 - Neoverse-V1 */ + MIDR_REV(MIDR_NEOVERSE_V1, 0, 0), + {}, +}; + +static bool etm4_core_reads_wrong_ccitmin(struct etmv4_drvdata *drvdata) +{ + /* + * Erratum affected cpus will read 256 as the minimum + * instruction trace cycle counting threshold where as + * the correct value should be 4 instead. Override the + * recorded value for 'drvdata->ccitmin' to workaround + * this problem. + */ + return is_midr_in_range_list(read_cpuid_id(), etm_wrong_ccitmin_cpus) && + (drvdata->ccitmin == 256); +} + static void etm4_init_arch_data(void *info) { u32 etmidr0; @@ -1195,6 +1228,9 @@ static void etm4_init_arch_data(void *info) etmidr3 = etm4x_relaxed_read32(csa, TRCIDR3); /* CCITMIN, bits[11:0] minimum threshold value that can be programmed */ drvdata->ccitmin = FIELD_GET(TRCIDR3_CCITMIN_MASK, etmidr3); + if (etm4_core_reads_wrong_ccitmin(drvdata)) + drvdata->ccitmin = 4; + /* EXLEVEL_S, bits[19:16] Secure state instruction tracing */ drvdata->s_ex_level = FIELD_GET(TRCIDR3_EXLEVEL_S_MASK, etmidr3); drvdata->config.s_ex_level = drvdata->s_ex_level;
Cycle counting is enabled, when requested and supported but with a default threshold value ETM_CYC_THRESHOLD_DEFAULT i.e 0x100 getting into TRCCCCTLR, representing the minimum interval between cycle count trace packets.
This makes cycle threshold user configurable, from the user space via perf event attributes. Although it falls back using ETM_CYC_THRESHOLD_DEFAULT, in case no explicit request. As expected it creates a sysfs file as well.
/sys/bus/event_source/devices/cs_etm/format/cc_threshold
New 'cc_threshold' uses 'event->attr.config3' as no more space is available in 'event->attr.config1' or 'event->attr.config2'.
Cc: Suzuki K Poulose suzuki.poulose@arm.com Cc: Mike Leach mike.leach@linaro.org Cc: James Clark james.clark@arm.com Cc: Leo Yan leo.yan@linaro.org Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Mike Leach mike.leach@linaro.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com --- drivers/hwtracing/coresight/coresight-etm-perf.c | 2 ++ drivers/hwtracing/coresight/coresight-etm4x-core.c | 12 ++++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 5ca6278baff4..09f75dffae60 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -68,6 +68,7 @@ PMU_FORMAT_ATTR(preset, "config:0-3"); PMU_FORMAT_ATTR(sinkid, "config2:0-31"); /* config ID - set if a system configuration is selected */ PMU_FORMAT_ATTR(configid, "config2:32-63"); +PMU_FORMAT_ATTR(cc_threshold, "config3:0-11");
/* @@ -101,6 +102,7 @@ static struct attribute *etm_config_formats_attr[] = { &format_attr_preset.attr, &format_attr_configid.attr, &format_attr_branch_broadcast.attr, + &format_attr_cc_threshold.attr, NULL, };
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 591fab73ee79..3193dafa7618 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -635,7 +635,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev, struct etmv4_config *config = &drvdata->config; struct perf_event_attr *attr = &event->attr; unsigned long cfg_hash; - int preset; + int preset, cc_threshold;
/* Clear configuration from previous run */ memset(config, 0, sizeof(struct etmv4_config)); @@ -658,7 +658,15 @@ static int etm4_parse_event_config(struct coresight_device *csdev, if (attr->config & BIT(ETM_OPT_CYCACC)) { config->cfg |= TRCCONFIGR_CCI; /* TRM: Must program this for cycacc to work */ - config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT; + cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK; + if (cc_threshold) { + if (cc_threshold < drvdata->ccitmin) + config->ccctlr = drvdata->ccitmin; + else + config->ccctlr = cc_threshold; + } else { + config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT; + } } if (attr->config & BIT(ETM_OPT_TS)) { /*
On 18/08/2023 12:20, Anshuman Khandual wrote:
Cycle counting is enabled, when requested and supported but with a default threshold value ETM_CYC_THRESHOLD_DEFAULT i.e 0x100 getting into TRCCCCTLR, representing the minimum interval between cycle count trace packets.
This makes cycle threshold user configurable, from the user space via perf event attributes. Although it falls back using ETM_CYC_THRESHOLD_DEFAULT, in case no explicit request. As expected it creates a sysfs file as well.
/sys/bus/event_source/devices/cs_etm/format/cc_threshold
New 'cc_threshold' uses 'event->attr.config3' as no more space is available in 'event->attr.config1' or 'event->attr.config2'.
Cc: Suzuki K Poulose suzuki.poulose@arm.com Cc: Mike Leach mike.leach@linaro.org Cc: James Clark james.clark@arm.com Cc: Leo Yan leo.yan@linaro.org Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Mike Leach mike.leach@linaro.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com
drivers/hwtracing/coresight/coresight-etm-perf.c | 2 ++ drivers/hwtracing/coresight/coresight-etm4x-core.c | 12 ++++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 5ca6278baff4..09f75dffae60 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -68,6 +68,7 @@ PMU_FORMAT_ATTR(preset, "config:0-3"); PMU_FORMAT_ATTR(sinkid, "config2:0-31"); /* config ID - set if a system configuration is selected */ PMU_FORMAT_ATTR(configid, "config2:32-63"); +PMU_FORMAT_ATTR(cc_threshold, "config3:0-11"); /* @@ -101,6 +102,7 @@ static struct attribute *etm_config_formats_attr[] = { &format_attr_preset.attr, &format_attr_configid.attr, &format_attr_branch_broadcast.attr,
- &format_attr_cc_threshold.attr, NULL, };
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 591fab73ee79..3193dafa7618 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -635,7 +635,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev, struct etmv4_config *config = &drvdata->config; struct perf_event_attr *attr = &event->attr; unsigned long cfg_hash;
- int preset;
- int preset, cc_threshold;
/* Clear configuration from previous run */ memset(config, 0, sizeof(struct etmv4_config)); @@ -658,7 +658,15 @@ static int etm4_parse_event_config(struct coresight_device *csdev, if (attr->config & BIT(ETM_OPT_CYCACC)) { config->cfg |= TRCCONFIGR_CCI; /* TRM: Must program this for cycacc to work */
config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK;if (cc_threshold) {if (cc_threshold < drvdata->ccitmin)config->ccctlr = drvdata->ccitmin;elseconfig->ccctlr = cc_threshold;} else {config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
Ideally this must be the ccitmin ? Theoretically, default value could be bigger than the minimum value supported by the implementation (i.e., ccitmin)
Suzuki
}
On Fri, 18 Aug 2023 at 12:25, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 18/08/2023 12:20, Anshuman Khandual wrote:
Cycle counting is enabled, when requested and supported but with a default threshold value ETM_CYC_THRESHOLD_DEFAULT i.e 0x100 getting into TRCCCCTLR, representing the minimum interval between cycle count trace packets.
This makes cycle threshold user configurable, from the user space via perf event attributes. Although it falls back using ETM_CYC_THRESHOLD_DEFAULT, in case no explicit request. As expected it creates a sysfs file as well.
/sys/bus/event_source/devices/cs_etm/format/cc_threshold
New 'cc_threshold' uses 'event->attr.config3' as no more space is available in 'event->attr.config1' or 'event->attr.config2'.
Cc: Suzuki K Poulose suzuki.poulose@arm.com Cc: Mike Leach mike.leach@linaro.org Cc: James Clark james.clark@arm.com Cc: Leo Yan leo.yan@linaro.org Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Mike Leach mike.leach@linaro.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com
drivers/hwtracing/coresight/coresight-etm-perf.c | 2 ++ drivers/hwtracing/coresight/coresight-etm4x-core.c | 12 ++++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 5ca6278baff4..09f75dffae60 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -68,6 +68,7 @@ PMU_FORMAT_ATTR(preset, "config:0-3"); PMU_FORMAT_ATTR(sinkid, "config2:0-31"); /* config ID - set if a system configuration is selected */ PMU_FORMAT_ATTR(configid, "config2:32-63"); +PMU_FORMAT_ATTR(cc_threshold, "config3:0-11");
/* @@ -101,6 +102,7 @@ static struct attribute *etm_config_formats_attr[] = { &format_attr_preset.attr, &format_attr_configid.attr, &format_attr_branch_broadcast.attr,
&format_attr_cc_threshold.attr, NULL,diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 591fab73ee79..3193dafa7618 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -635,7 +635,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev, struct etmv4_config *config = &drvdata->config; struct perf_event_attr *attr = &event->attr; unsigned long cfg_hash;
int preset;
int preset, cc_threshold; /* Clear configuration from previous run */ memset(config, 0, sizeof(struct etmv4_config));@@ -658,7 +658,15 @@ static int etm4_parse_event_config(struct coresight_device *csdev, if (attr->config & BIT(ETM_OPT_CYCACC)) { config->cfg |= TRCCONFIGR_CCI; /* TRM: Must program this for cycacc to work */
config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK;if (cc_threshold) {if (cc_threshold < drvdata->ccitmin)config->ccctlr = drvdata->ccitmin;elseconfig->ccctlr = cc_threshold;} else {config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;Ideally this must be the ccitmin ? Theoretically, default value could be bigger than the minimum value supported by the implementation (i.e., ccitmin)
Suzuki
In order not to change existing behaviour unexpectedly this could be re-ordered...
cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK; if (!cc_threshold) cc_threshold = ETM_CYC_THRESHOLD_DEFAULT; if (cc_threshold < drvdata->ccitmin) cc_threshold = drvdata->ccitmin config->ccctlr = cc_threshold;
Mike
} } if (attr->config & BIT(ETM_OPT_TS)) { /*
On 18/08/2023 14:01, Mike Leach wrote:
On Fri, 18 Aug 2023 at 12:25, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 18/08/2023 12:20, Anshuman Khandual wrote:
Cycle counting is enabled, when requested and supported but with a default threshold value ETM_CYC_THRESHOLD_DEFAULT i.e 0x100 getting into TRCCCCTLR, representing the minimum interval between cycle count trace packets.
This makes cycle threshold user configurable, from the user space via perf event attributes. Although it falls back using ETM_CYC_THRESHOLD_DEFAULT, in case no explicit request. As expected it creates a sysfs file as well.
/sys/bus/event_source/devices/cs_etm/format/cc_threshold
New 'cc_threshold' uses 'event->attr.config3' as no more space is available in 'event->attr.config1' or 'event->attr.config2'.
Cc: Suzuki K Poulose suzuki.poulose@arm.com Cc: Mike Leach mike.leach@linaro.org Cc: James Clark james.clark@arm.com Cc: Leo Yan leo.yan@linaro.org Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Mike Leach mike.leach@linaro.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com
drivers/hwtracing/coresight/coresight-etm-perf.c | 2 ++ drivers/hwtracing/coresight/coresight-etm4x-core.c | 12 ++++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 5ca6278baff4..09f75dffae60 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -68,6 +68,7 @@ PMU_FORMAT_ATTR(preset, "config:0-3"); PMU_FORMAT_ATTR(sinkid, "config2:0-31"); /* config ID - set if a system configuration is selected */ PMU_FORMAT_ATTR(configid, "config2:32-63"); +PMU_FORMAT_ATTR(cc_threshold, "config3:0-11");
/* @@ -101,6 +102,7 @@ static struct attribute *etm_config_formats_attr[] = { &format_attr_preset.attr, &format_attr_configid.attr, &format_attr_branch_broadcast.attr,
&format_attr_cc_threshold.attr, NULL,diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 591fab73ee79..3193dafa7618 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -635,7 +635,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev, struct etmv4_config *config = &drvdata->config; struct perf_event_attr *attr = &event->attr; unsigned long cfg_hash;
int preset;
int preset, cc_threshold; /* Clear configuration from previous run */ memset(config, 0, sizeof(struct etmv4_config));@@ -658,7 +658,15 @@ static int etm4_parse_event_config(struct coresight_device *csdev, if (attr->config & BIT(ETM_OPT_CYCACC)) { config->cfg |= TRCCONFIGR_CCI; /* TRM: Must program this for cycacc to work */
config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK;if (cc_threshold) {if (cc_threshold < drvdata->ccitmin)config->ccctlr = drvdata->ccitmin;elseconfig->ccctlr = cc_threshold;} else {config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;Ideally this must be the ccitmin ? Theoretically, default value could be bigger than the minimum value supported by the implementation (i.e., ccitmin)
Suzuki
In order not to change existing behaviour unexpectedly this could be re-ordered...
cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK; if (!cc_threshold) cc_threshold = ETM_CYC_THRESHOLD_DEFAULT; if (cc_threshold < drvdata->ccitmin) cc_threshold = drvdata->ccitmin config->ccctlr = cc_threshold;
That sounds better, Thanks Mike
Suzuki
Mike
} } if (attr->config & BIT(ETM_OPT_TS)) { /*
On 8/18/23 18:34, Suzuki K Poulose wrote:
On 18/08/2023 14:01, Mike Leach wrote:
On Fri, 18 Aug 2023 at 12:25, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 18/08/2023 12:20, Anshuman Khandual wrote:
Cycle counting is enabled, when requested and supported but with a default threshold value ETM_CYC_THRESHOLD_DEFAULT i.e 0x100 getting into TRCCCCTLR, representing the minimum interval between cycle count trace packets.
This makes cycle threshold user configurable, from the user space via perf event attributes. Although it falls back using ETM_CYC_THRESHOLD_DEFAULT, in case no explicit request. As expected it creates a sysfs file as well.
/sys/bus/event_source/devices/cs_etm/format/cc_threshold
New 'cc_threshold' uses 'event->attr.config3' as no more space is available in 'event->attr.config1' or 'event->attr.config2'.
Cc: Suzuki K Poulose suzuki.poulose@arm.com Cc: Mike Leach mike.leach@linaro.org Cc: James Clark james.clark@arm.com Cc: Leo Yan leo.yan@linaro.org Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Mike Leach mike.leach@linaro.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com
drivers/hwtracing/coresight/coresight-etm-perf.c | 2 ++ drivers/hwtracing/coresight/coresight-etm4x-core.c | 12 ++++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 5ca6278baff4..09f75dffae60 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -68,6 +68,7 @@ PMU_FORMAT_ATTR(preset, "config:0-3"); PMU_FORMAT_ATTR(sinkid, "config2:0-31"); /* config ID - set if a system configuration is selected */ PMU_FORMAT_ATTR(configid, "config2:32-63"); +PMU_FORMAT_ATTR(cc_threshold, "config3:0-11");
/* @@ -101,6 +102,7 @@ static struct attribute *etm_config_formats_attr[] = { &format_attr_preset.attr, &format_attr_configid.attr, &format_attr_branch_broadcast.attr, + &format_attr_cc_threshold.attr, NULL, };
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 591fab73ee79..3193dafa7618 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -635,7 +635,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev, struct etmv4_config *config = &drvdata->config; struct perf_event_attr *attr = &event->attr; unsigned long cfg_hash; - int preset; + int preset, cc_threshold;
/* Clear configuration from previous run */ memset(config, 0, sizeof(struct etmv4_config)); @@ -658,7 +658,15 @@ static int etm4_parse_event_config(struct coresight_device *csdev, if (attr->config & BIT(ETM_OPT_CYCACC)) { config->cfg |= TRCCONFIGR_CCI; /* TRM: Must program this for cycacc to work */ - config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT; + cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK; + if (cc_threshold) { + if (cc_threshold < drvdata->ccitmin) + config->ccctlr = drvdata->ccitmin; + else + config->ccctlr = cc_threshold; + } else { + config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
Ideally this must be the ccitmin ? Theoretically, default value could be bigger than the minimum value supported by the implementation (i.e., ccitmin)
Suzuki
In order not to change existing behaviour unexpectedly this could be re-ordered...
cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK; if (!cc_threshold) cc_threshold = ETM_CYC_THRESHOLD_DEFAULT; if (cc_threshold < drvdata->ccitmin) cc_threshold = drvdata->ccitmin config->ccctlr = cc_threshold;
That sounds better, Thanks Mike
Sure, will change as suggested.
This updates config option to include 'cc_threshold' tunable value.
Cc: Suzuki K Poulose suzuki.poulose@arm.com Cc: Mike Leach mike.leach@linaro.org Cc: James Clark james.clark@arm.com Cc: Jonathan Corbet corbet@lwn.net Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed by: Mike Leach mike.leach@linaro.org Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com --- Documentation/trace/coresight/coresight.rst | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index 4a71ea6cb390..ce55adb80b82 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -624,6 +624,10 @@ They are also listed in the folder /sys/bus/event_source/devices/cs_etm/format/ * - timestamp - Session local version of the system wide setting: :ref:`ETMv4_MODE_TIMESTAMP <coresight-timestamp>` + * - cc_threshold + - Cycle count threshold value. If nothing is provided here or the provided value is 0, then the + default value i.e 0x100 will be used. If provided value is less than minimum cycles threshold + value, as indicated via TRCIDR3.CCITMIN, then the minimum value will be used instead.
How to use the STM module -------------------------
-
Anshuman Khandual -
Mike Leach -
Suzuki K Poulose