This patchset introduces initial concepts in CoreSight system configuration management support. to allow more detailed and complex programming to be applied to CoreSight systems during trace capture.
Configurations consist of 2 elements:- 1) Features - programming combinations for devices, applied to a class of device on the system (all ETMv4), or individual devices. 2) Configurations - a set of programmed features used when the named configuration is selected.
Features and configurations are declared as a data table, a set of register, resource and parameter requirements. Features and configurations are loaded into the system by the virtual cs_syscfg device. This then matches features to any registered devices and loads the feature into them.
Individual device classes that support feature and configuration register with cs_syscfg.
Once loaded a configuration can be enabled for a specific trace run. Configurations are registered with the perf cs_etm event as entries in cs_etm/events. These can be selected on the perf command line as follows:-
perf record -e cs_etm/<config_name>/ ...
This patch set has one pre-loaded configuration and feature. A named "strobing" feature is provided for ETMv4. A named "autofdo" configuration is provided. This configuration enables strobing on any ETM in used.
Thus the command: perf record -e cs_etm/autofdo/ ...
will trace the supplied application while enabling the "autofdo" configuation on each ETM as it is enabled by perf. This in turn will enable strobing for the ETM - with default parameters. Parameters can be adjusted using configfs.
The sink used in the trace run will be automatically selected.
A configuration can supply up to 15 of preset parameter values, which will subsitute in parameter values for any feature used in the configuration.
Selection of preset values as follows perf record -e cs_etm/autofdo,preset=1/ ...
(valid presets 1-N, where N is the number supplied in the configuration, not exceeding 15. preset=0 is the same as not selecting a preset.)
Applies to & tested against coresight/next-ETE-TRBE (5.12-rc3 base)
Changes since v6: Fixed kernel test robot issues- Reported-by: kernel test robot lkp@intel.com
Changes since v5:
1) Fix code style issues from auto-build reports, as Reported-by: kernel test robot lkp@intel.com 2) Update comments to get consistent docs for API functions. 3) remove unused #define from autofdo example. 4) fix perf code style issues from patch 4 (Mathieu) 5) fix configfs code style issues from patch 9. (Mathieu)
Changes since v4: (based on comments from Matthieu and Suzuki). No large functional changes - primarily code improvements and naming schema. 1) Updated entire set to ensure a consistent naming scheme was used for variables and struct members that refer to the key objects in the system. Suffixes _desc used for all references to feature and configuraion descriptors, suffix _csdev used for all references to load feature and configs in the csdev instances. (Mathieu & Suzuki). 2) Dropped the 'configurations' sub dir in cs_etm perf directories as superfluous with the configfs containing the same information. (Mathieu). 3) Simplified perf handling code (suzuki) 4) Multiple simplifications and improvements for code readability (Matthieu and Suzuki)
Changes since v3: (Primarily based on comments from Matthieu) 1) Locking mechanisms simplified. 2) Removed the possibility to enable features independently from configurations.Only configurations can be enabled now. Simplifies programming logic. 3) Configuration now uses an activate->enable mechanism. This means that perf will activate a selected configuration at the start of a session (during setup_aux), and disable at the end of a session (around free_aux) The active configuration and associated features will be programmed into the CoreSight device instances when they are enabled. This locks the configuration into the system while in use. Parameters cannot be altered while this is in place. This mechanism will be extended in future for dynamic load / unload of configurations to prevent removal while in use. 4) Removed the custom bus / driver as un-necessary. A single device is registered to own perf fs elements and configfs. 5) Various other minor issues addressed.
Changes since v2: 1) Added documentation file. 2) Altered cs_syscfg driver to no longer be coresight_device based, and moved to its own custom bus to remove it from the main coresight bus. (Mathieu) 3) Added configfs support to inspect and control loaded configurations and features. Allows listing of preset values (Yabin Cui) 4) Dropped sysfs support for adjusting feature parameters on the per device basis, in favour of a single point adjustment in configfs that is pushed to all device instances. 5) Altered how the config and preset command line options are handled in perf and the drivers. (Mathieu and Suzuki). 6) Fixes for various issues and technical points (Mathieu, Yabin)
Changes since v1: 1) Moved preloaded configurations and features out of individual drivers. 2) Added cs_syscfg driver to manage configurations and features. Individual drivers register with cs_syscfg indicating support for config, and provide matching information that the system uses to load features into the drivers. This allows individual drivers to be updated on an as needed basis - and removes the need to consider devices that cannot benefit from configuration - static replicators, funnels, tpiu. 3) Added perf selection of configuarations. 4) Rebased onto the coresight module loading set.
To follow in future revisions / sets:- a) load of additional config and features by loadable module. b) load of additional config and features by configfs c) enhanced resource management for ETMv4 and checking features have sufficient resources to be enabled. d) ECT and CTI support for configuration and features.
Mike Leach (10): coresight: syscfg: Initial coresight system configuration coresight: syscfg: Add registration and feature loading for cs devices coresight: config: Add configuration and feature generic functions coresight: etm-perf: update to handle configuration selection coresight: syscfg: Add API to activate and enable configurations coresight: etm-perf: Update to activate selected configuration coresight: etm4x: Add complex configuration handlers to etmv4 coresight: config: Add preloaded configurations coresight: syscfg: Add initial configfs support Documentation: coresight: Add documentation for CoreSight config
.../trace/coresight/coresight-config.rst | 244 ++++++ Documentation/trace/coresight/coresight.rst | 16 + drivers/hwtracing/coresight/Makefile | 7 +- .../hwtracing/coresight/coresight-cfg-afdo.c | 153 ++++ .../coresight/coresight-cfg-preload.c | 31 + .../coresight/coresight-cfg-preload.h | 13 + .../hwtracing/coresight/coresight-config.c | 275 ++++++ .../hwtracing/coresight/coresight-config.h | 253 ++++++ drivers/hwtracing/coresight/coresight-core.c | 12 +- .../hwtracing/coresight/coresight-etm-perf.c | 150 +++- .../hwtracing/coresight/coresight-etm-perf.h | 12 +- .../hwtracing/coresight/coresight-etm4x-cfg.c | 182 ++++ .../hwtracing/coresight/coresight-etm4x-cfg.h | 30 + .../coresight/coresight-etm4x-core.c | 38 +- .../coresight/coresight-etm4x-sysfs.c | 3 + .../coresight/coresight-syscfg-configfs.c | 396 +++++++++ .../coresight/coresight-syscfg-configfs.h | 45 + .../hwtracing/coresight/coresight-syscfg.c | 804 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 81 ++ include/linux/coresight.h | 7 + 20 files changed, 2716 insertions(+), 36 deletions(-) create mode 100644 Documentation/trace/coresight/coresight-config.rst create mode 100644 drivers/hwtracing/coresight/coresight-cfg-afdo.c create mode 100644 drivers/hwtracing/coresight/coresight-cfg-preload.c create mode 100644 drivers/hwtracing/coresight/coresight-cfg-preload.h create mode 100644 drivers/hwtracing/coresight/coresight-config.c create mode 100644 drivers/hwtracing/coresight/coresight-config.h create mode 100644 drivers/hwtracing/coresight/coresight-etm4x-cfg.c create mode 100644 drivers/hwtracing/coresight/coresight-etm4x-cfg.h create mode 100644 drivers/hwtracing/coresight/coresight-syscfg-configfs.c create mode 100644 drivers/hwtracing/coresight/coresight-syscfg-configfs.h create mode 100644 drivers/hwtracing/coresight/coresight-syscfg.c create mode 100644 drivers/hwtracing/coresight/coresight-syscfg.h
Creates an system management API to allow complex configurations and features to be programmed into a CoreSight infrastructure.
A feature is defined as a programming set for a device or class of devices.
A configuration is a set of features across the system that are enabled for a trace session.
The API will manage system wide configuration, and allow complex programmed features to be added to individual device instances, and provide for system wide configuration selection on trace capture operations.
This patch creates the initial data object and the initial API for loading configurations and features.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org --- drivers/hwtracing/coresight/Makefile | 2 +- .../hwtracing/coresight/coresight-config.h | 142 +++++++++++++ drivers/hwtracing/coresight/coresight-core.c | 12 +- .../hwtracing/coresight/coresight-etm-perf.c | 2 +- .../hwtracing/coresight/coresight-etm-perf.h | 2 +- .../hwtracing/coresight/coresight-syscfg.c | 199 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 46 ++++ 7 files changed, 401 insertions(+), 4 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-config.h create mode 100644 drivers/hwtracing/coresight/coresight-syscfg.c create mode 100644 drivers/hwtracing/coresight/coresight-syscfg.h
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index d60816509755..3d037f17aade 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -4,7 +4,7 @@ # obj-$(CONFIG_CORESIGHT) += coresight.o coresight-y := coresight-core.o coresight-etm-perf.o coresight-platform.o \ - coresight-sysfs.o + coresight-sysfs.o coresight-syscfg.o obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o coresight-tmc-y := coresight-tmc-core.o coresight-tmc-etf.o \ coresight-tmc-etr.o diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h new file mode 100644 index 000000000000..21aa7464dcdc --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -0,0 +1,142 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Linaro Limited, All rights reserved. + * Author: Mike Leach mike.leach@linaro.org + */ + +#ifndef _CORESIGHT_CORESIGHT_CONFIG_H +#define _CORESIGHT_CORESIGHT_CONFIG_H + +#include <linux/coresight.h> +#include <linux/types.h> + +/* CoreSight Configuration Management - component and system wide configuration */ + +/* + * Register type flags for register value descriptor: + * describe how the value is interpreted, and handled. + */ +#define CS_CFG_REG_TYPE_STD 0x80 /* reg is standard reg */ +#define CS_CFG_REG_TYPE_RESOURCE 0x40 /* reg is a resource */ +#define CS_CFG_REG_TYPE_VAL_PARAM 0x08 /* reg value uses param */ +#define CS_CFG_REG_TYPE_VAL_MASK 0x04 /* reg value bit masked */ +#define CS_CFG_REG_TYPE_VAL_64BIT 0x02 /* reg value 64 bit */ +#define CS_CFG_REG_TYPE_VAL_SAVE 0x01 /* reg value save on disable */ + +/* + * flags defining what device class a feature will match to when processing a + * system configuration - used by config data and devices. + */ +#define CS_CFG_MATCH_CLASS_SRC_ALL 0x0001 /* match any source */ +#define CS_CFG_MATCH_CLASS_SRC_ETM4 0x0002 /* match any ETMv4 device */ + +/* flags defining device instance matching - used in config match desc data. */ +#define CS_CFG_MATCH_INST_ANY 0x80000000 /* any instance of a class */ + +/* + * Limit number of presets in a configuration + * This is related to the number of bits (4) we use to select the preset on + * the perf command line. Preset 0 is always none selected. + * See PMU_FORMAT_ATTR(preset, "config:0-3") in coresight-etm-perf.c + */ +#define CS_CFG_CONFIG_PRESET_MAX 15 + +/** + * Parameter descriptor for a device feature. + * + * @name: Name of parameter. + * @value: Initial or default value. + */ +struct cscfg_parameter_desc { + const char *name; + u64 value; +}; + +/** + * Representation of register value and a descriptor of register usage. + * + * Used as a descriptor in the feature descriptors. + * Used as a value in when in a feature loading into a csdev. + * + * Supports full 64 bit register value, or 32 bit value with optional mask + * value. + * + * @type: define register usage and interpretation. + * @offset: the address offset for register in the hardware device (per device specification). + * @hw_info: optional hardware device type specific information. (ETM / CTI specific etc) + * @val64: 64 bit value. + * @val32: 32 bit value. + * @mask32: 32 bit mask when using 32 bit value to access device register - if mask type. + * @param_idx: parameter index value into parameter array if param type. + */ +struct cscfg_regval_desc { + struct { + u32 type:8; + u32 offset:12; + u32 hw_info:12; + }; + union { + u64 val64; + struct { + u32 val32; + u32 mask32; + }; + u32 param_idx; + }; +}; + +/** + * Device feature descriptor - combination of registers and parameters to + * program a device to implement a specific complex function. + * + * @name: feature name. + * @description: brief description of the feature. + * @item: List entry. + * @match_flags: matching information if loading into a device + * @nr_params: number of parameters used. + * @params_desc: array of parameters used. + * @nr_regs: number of registers used. + * @regs_desc: array of registers used. + */ +struct cscfg_feature_desc { + const char *name; + const char *description; + struct list_head item; + u32 match_flags; + int nr_params; + struct cscfg_parameter_desc *params_desc; + int nr_regs; + struct cscfg_regval_desc *regs_desc; +}; + +/** + * Configuration descriptor - describes selectable system configuration. + * + * A configuration describes device features in use, and may provide preset + * values for the parameters in those features. + * + * A single set of presets is the sum of the parameters declared by + * all the features in use - this value is @nr_total_params. + * + * @name: name of the configuration - used for selection. + * @description: description of the purpose of the configuration. + * @item: list entry. + * @nr_feat_refs: Number of features used in this configuration. + * @feat_ref_names: references to features used in this configuration. + * @nr_presets: Number of sets of presets supplied by this configuration. + * @nr_total_params: Sum of all parameters declared by used features + * @presets: Array of preset values. + * + */ +struct cscfg_config_desc { + const char *name; + const char *description; + struct list_head item; + int nr_feat_refs; + const char **feat_ref_names; + int nr_presets; + int nr_total_params; + const u64 *presets; /* nr_presets * nr_total_params */ +}; + +#endif /* _CORESIGHT_CORESIGHT_CONFIG_H */ diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index ca75b0b54e1f..868785983c79 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -21,6 +21,7 @@
#include "coresight-etm-perf.h" #include "coresight-priv.h" +#include "coresight-syscfg.h"
static DEFINE_MUTEX(coresight_mutex); static DEFINE_PER_CPU(struct coresight_device *, csdev_sink); @@ -1764,13 +1765,22 @@ static int __init coresight_init(void)
ret = etm_perf_init(); if (ret) - bus_unregister(&coresight_bustype); + goto exit_bus_unregister;
+ /* initialise the coresight syscfg API */ + ret = cscfg_init(); + if (!ret) + return 0; + + etm_perf_exit(); +exit_bus_unregister: + bus_unregister(&coresight_bustype); return ret; }
static void __exit coresight_exit(void) { + cscfg_exit(); etm_perf_exit(); bus_unregister(&coresight_bustype); } diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index f123c26b9f54..15310c72f89f 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -748,7 +748,7 @@ int __init etm_perf_init(void) return ret; }
-void __exit etm_perf_exit(void) +void etm_perf_exit(void) { perf_pmu_unregister(&etm_pmu); } diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.h b/drivers/hwtracing/coresight/coresight-etm-perf.h index 3e4f2ad5e193..29d90dfeba31 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.h +++ b/drivers/hwtracing/coresight/coresight-etm-perf.h @@ -83,6 +83,6 @@ static inline void *etm_perf_sink_config(struct perf_output_handle *handle) #endif /* CONFIG_CORESIGHT */
int __init etm_perf_init(void); -void __exit etm_perf_exit(void); +void etm_perf_exit(void);
#endif diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c new file mode 100644 index 000000000000..417db3f92c2f --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Linaro Limited, All rights reserved. + * Author: Mike Leach mike.leach@linaro.org + */ + +#include <linux/platform_device.h> + +#include "coresight-config.h" +#include "coresight-syscfg.h" + +/* + * cscfg_ API manages configurations and features for the entire coresight + * infrastructure. + * + * It allows the loading of configurations and features, and loads these into + * coresight devices as appropriate. + */ + +/* protect the cscsg_data and device */ +static DEFINE_MUTEX(cscfg_mutex); + +/* only one of these */ +static struct cscfg_manager *cscfg_mgr; + +/* load features and configuations into the lists */ + +/* check feature list for a named feature - call with mutex locked. */ +static bool cscfg_match_list_feat(const char *name) +{ + struct cscfg_feature_desc *feat_desc; + + list_for_each_entry(feat_desc, &cscfg_mgr->feat_desc_list, item) { + if (strcmp(feat_desc->name, name) == 0) + return true; + } + return false; +} + +/* check all feat needed for cfg are in the list - call with mutex locked. */ +static int cscfg_check_feat_for_cfg(struct cscfg_config_desc *config_desc) +{ + int i; + + for (i = 0; i < config_desc->nr_feat_refs; i++) + if (!cscfg_match_list_feat(config_desc->feat_ref_names[i])) + return -EINVAL; + return 0; +} + +/* + * load feature - add to feature list. + */ +static int cscfg_load_feat(struct cscfg_feature_desc *feat_desc) +{ + list_add(&feat_desc->item, &cscfg_mgr->feat_desc_list); + + return 0; +} + +/* + * load config into the system - validate used features exist then add to + * config list. + */ +static int cscfg_load_config(struct cscfg_config_desc *config_desc) +{ + int err; + + /* validate features are present */ + err = cscfg_check_feat_for_cfg(config_desc); + if (err) + return err; + + list_add(&config_desc->item, &cscfg_mgr->config_desc_list); + return 0; +} + +/** + * cscfg_load_config_sets - API function to load feature and config sets. + * + * Take a 0 terminated array of feature descriptors and/or configuration + * descriptors and load into the system. + * Features are loaded first to ensure configuration dependencies can be met. + * + * @config_descs: 0 terminated array of configuration descriptors. + * @feat_descs: 0 terminated array of feature descriptors. + */ +int cscfg_load_config_sets(struct cscfg_config_desc **config_descs, + struct cscfg_feature_desc **feat_descs) +{ + int err, i = 0; + + mutex_lock(&cscfg_mutex); + + /* load features first */ + if (feat_descs) { + while (feat_descs[i]) { + err = cscfg_load_feat(feat_descs[i]); + if (err) { + pr_err("coresight-syscfg: Failed to load feature %s\n", + feat_descs[i]->name); + goto exit_unlock; + } + i++; + } + } + + /* next any configurations to check feature dependencies */ + i = 0; + if (config_descs) { + while (config_descs[i]) { + err = cscfg_load_config(config_descs[i]); + if (err) { + pr_err("coresight-syscfg: Failed to load configuration %s\n", + config_descs[i]->name); + goto exit_unlock; + } + i++; + } + } + +exit_unlock: + mutex_unlock(&cscfg_mutex); + return err; +} +EXPORT_SYMBOL_GPL(cscfg_load_config_sets); + +/* Initialise system configuration management device. */ + +struct device *cscfg_device(void) +{ + return cscfg_mgr ? &cscfg_mgr->dev : NULL; +} + +/* Must have a release function or the kernel will complain on module unload */ +static void cscfg_dev_release(struct device *dev) +{ + kfree(cscfg_mgr); + cscfg_mgr = NULL; +} + +/* a device is needed to "own" some kernel elements such as sysfs entries. */ +static int cscfg_create_device(void) +{ + struct device *dev; + int err = -ENOMEM; + + mutex_lock(&cscfg_mutex); + if (cscfg_mgr) { + err = -EINVAL; + goto create_dev_exit_unlock; + } + + cscfg_mgr = kzalloc(sizeof(struct cscfg_manager), GFP_KERNEL); + if (!cscfg_mgr) + goto create_dev_exit_unlock; + + /* setup the device */ + dev = cscfg_device(); + dev->release = cscfg_dev_release; + dev->init_name = "cs_system_cfg"; + + err = device_register(dev); + if (err) + cscfg_dev_release(dev); + +create_dev_exit_unlock: + mutex_unlock(&cscfg_mutex); + return err; +} + +static void cscfg_clear_device(void) +{ + mutex_lock(&cscfg_mutex); + device_unregister(cscfg_device()); + mutex_unlock(&cscfg_mutex); +} + +/* Initialise system config management API device */ +int __init cscfg_init(void) +{ + int err = 0; + + err = cscfg_create_device(); + if (err) + return err; + + INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); + INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); + INIT_LIST_HEAD(&cscfg_mgr->config_desc_list); + + dev_info(cscfg_device(), "CoreSight Configuration manager initialised"); + return 0; +} + +void cscfg_exit(void) +{ + cscfg_clear_device(); +} diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h new file mode 100644 index 000000000000..18be9b58cd0b --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Coresight system configuration driver. + */ + +#ifndef CORESIGHT_SYSCFG_H +#define CORESIGHT_SYSCFG_H + +#include <linux/coresight.h> +#include <linux/device.h> + +#include "coresight-config.h" + +/** + * System configuration manager device. + * + * Contains lists of the loaded configurations and features, plus a list of CoreSight devices + * registered with the system as supporting configuration management. + * + * Need a device to 'own' some coresight system wide sysfs entries in + * perf events, configfs etc. + * + * @dev: The device. + * @csdev_desc_list: List of coresight devices registered with the configuration manager. + * @feat_desc_list: List of feature descriptors to load into registered devices. + * @config_desc_list: List of system configuration descriptors to load into registered devices. + */ +struct cscfg_manager { + struct device dev; + struct list_head csdev_desc_list; + struct list_head feat_desc_list; + struct list_head config_desc_list; +}; + +/* get reference to dev in cscfg_manager */ +struct device *cscfg_device(void); + +/* internal core operations for cscfg */ +int __init cscfg_init(void); +void cscfg_exit(void); + +/* syscfg manager external API */ +int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs, + struct cscfg_feature_desc **feat_descs); + +#endif /* CORESIGHT_SYSCFG_H */
API for individual devices to register with the syscfg management system is added.
Devices register with matching information, and any features or configurations that match will be loaded into the device.
The feature and configuration loading is extended so that on load these are loaded into any currently registered devices. This allows configuration loading after devices have been registered.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org --- .../hwtracing/coresight/coresight-config.h | 98 +++++ .../hwtracing/coresight/coresight-syscfg.c | 338 +++++++++++++++++- .../hwtracing/coresight/coresight-syscfg.h | 19 + include/linux/coresight.h | 5 + 4 files changed, 459 insertions(+), 1 deletion(-)
diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h index 21aa7464dcdc..685fb46ce893 100644 --- a/drivers/hwtracing/coresight/coresight-config.h +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -139,4 +139,102 @@ struct cscfg_config_desc { const u64 *presets; /* nr_presets * nr_total_params */ };
+/** + * config register instance - part of a loaded feature. + * maps register values to csdev driver structures + * + * @reg_desc: value to use when setting feature on device / store for + * readback of volatile values. + * @driver_regval: pointer to internal driver element used to set the value + * in hardware. + */ +struct cscfg_regval_csdev { + struct cscfg_regval_desc reg_desc; + void *driver_regval; +}; + +/** + * config parameter instance - part of a loaded feature. + * + * @feat_csdev: parent feature + * @reg_csdev: register value updated by this parameter. + * @current_value: current value of parameter - may be set by user via + * sysfs, or modified during device operation. + * @val64: true if 64 bit value + */ +struct cscfg_parameter_csdev { + struct cscfg_feature_csdev *feat_csdev; + struct cscfg_regval_csdev *reg_csdev; + u64 current_value; + bool val64; +}; + +/** + * Feature instance loaded into a CoreSight device. + * + * When a feature is loaded into a specific device, then this structure holds + * the connections between the register / parameter values used and the + * internal data structures that are written when the feature is enabled. + * + * Since applying a feature modifies internal data structures in the device, + * then we have a reference to the device spinlock to protect access to these + * structures (@drv_spinlock). + * + * @feat_desc: pointer to the static descriptor for this feature. + * @csdev: parent CoreSight device instance. + * @node: list entry into feature list for this device. + * @drv_spinlock: device spinlock for access to driver register data. + * @nr_params: number of parameters. + * @params_csdev: current parameter values on this device + * @nr_regs: number of registers to be programmed. + * @regs_csdev: Programming details for the registers + */ +struct cscfg_feature_csdev { + const struct cscfg_feature_desc *feat_desc; + struct coresight_device *csdev; + struct list_head node; + spinlock_t *drv_spinlock; + int nr_params; + struct cscfg_parameter_csdev *params_csdev; + int nr_regs; + struct cscfg_regval_csdev *regs_csdev; +}; + +/** + * Configuration instance when loaded into a CoreSight device. + * + * The instance contains references to loaded features on this device that are + * used by the configuration. + * + * @config_desc:reference to the descriptor for this configuration + * @csdev: parent coresight device for this configuration instance. + * @enabled: true if configuration is enabled on this device. + * @node: list entry within the coresight device + * @nr_feat: Number of features on this device that are used in the + * configuration. + * @feats_csdev:references to the device features to enable. + */ +struct cscfg_config_csdev { + const struct cscfg_config_desc *config_desc; + struct coresight_device *csdev; + bool enabled; + struct list_head node; + int nr_feat; + struct cscfg_feature_csdev *feats_csdev[0]; +}; + +/** + * Coresight device operations. + * + * Registered coresight devices provide these operations to manage feature + * instances compatible with the device hardware and drivers + * + * @load_feat: Pass a feature descriptor into the device and create the + * loaded feature instance (struct cscfg_feature_csdev). + */ +struct cscfg_csdev_feat_ops { + int (*load_feat)(struct coresight_device *csdev, + struct cscfg_feature_csdev *feat_csdev); +}; + #endif /* _CORESIGHT_CORESIGHT_CONFIG_H */ diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index 417db3f92c2f..e93e62c1efbb 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -25,6 +25,199 @@ static struct cscfg_manager *cscfg_mgr;
/* load features and configuations into the lists */
+/* protect the cfg lists in the csdev instances */ +static DEFINE_MUTEX(cscfg_csdev_mutex); + +/* get name feature instance from a coresight device list of features */ +static struct cscfg_feature_csdev * +cscfg_get_feat_csdev(struct coresight_device *csdev, const char *name) +{ + struct cscfg_feature_csdev *feat_csdev = NULL; + + list_for_each_entry(feat_csdev, &csdev->feature_csdev_list, node) { + if (strcmp(feat_csdev->feat_desc->name, name) == 0) + return feat_csdev; + } + return NULL; +} + +/* allocate the device config instance - with max number of used features */ +static struct cscfg_config_csdev * +cscfg_alloc_csdev_cfg(struct coresight_device *csdev, int nr_feats) +{ + struct cscfg_config_csdev *config_csdev = NULL; + struct device *dev = csdev->dev.parent; + + /* this is being allocated using the devm for the coresight device */ + config_csdev = devm_kzalloc(dev, + offsetof(struct cscfg_config_csdev, feats_csdev[nr_feats]), + GFP_KERNEL); + if (!config_csdev) + return NULL; + + config_csdev->csdev = csdev; + return config_csdev; +} + +/* Load a config into a device if there are any feature matches between config and device */ +static int cscfg_add_csdev_cfg(struct coresight_device *csdev, + struct cscfg_config_desc *config_desc) +{ + struct cscfg_config_csdev *config_csdev = NULL; + struct cscfg_feature_csdev *feat_csdev; + int i; + + /* look at each required feature and see if it matches any feature on the device */ + for (i = 0; i < config_desc->nr_feat_refs; i++) { + /* look for a matching name */ + feat_csdev = cscfg_get_feat_csdev(csdev, config_desc->feat_ref_names[i]); + if (feat_csdev) { + /* + * At least one feature on this device matches the config + * add a config instance to the device and a reference to the feature. + */ + if (!config_csdev) { + config_csdev = cscfg_alloc_csdev_cfg(csdev, + config_desc->nr_feat_refs); + if (!config_csdev) + return -ENOMEM; + config_csdev->config_desc = config_desc; + } + config_csdev->feats_csdev[config_csdev->nr_feat++] = feat_csdev; + } + } + /* if matched features, add config to device.*/ + if (config_csdev) { + mutex_lock(&cscfg_csdev_mutex); + list_add(&config_csdev->node, &csdev->config_csdev_list); + mutex_unlock(&cscfg_csdev_mutex); + } + + return 0; +} + +/* + * Add the config to the set of registered devices - call with mutex locked. + * Iterates through devices - any device that matches one or more of the + * configuration features will load it, the others will ignore it. + */ +static int cscfg_add_cfg_to_csdevs(struct cscfg_config_desc *config_desc) +{ + struct cscfg_registered_csdev *csdev_item; + int err; + + list_for_each_entry(csdev_item, &cscfg_mgr->csdev_desc_list, item) { + err = cscfg_add_csdev_cfg(csdev_item->csdev, config_desc); + if (err) + return err; + } + return 0; +} + +/* + * Allocate a feature object for load into a csdev. + * memory allocated using the csdev->dev object using devm managed allocator. + */ +static struct cscfg_feature_csdev * +cscfg_alloc_csdev_feat(struct coresight_device *csdev, struct cscfg_feature_desc *feat_desc) +{ + struct cscfg_feature_csdev *feat_csdev = NULL; + struct device *dev = csdev->dev.parent; + int i; + + feat_csdev = devm_kzalloc(dev, sizeof(struct cscfg_feature_csdev), GFP_KERNEL); + if (!feat_csdev) + return NULL; + + /* parameters are optional - could be 0 */ + feat_csdev->nr_params = feat_desc->nr_params; + + /* + * if we need parameters, zero alloc the space here, the load routine in + * the csdev device driver will fill out some information according to + * feature descriptor. + */ + if (feat_csdev->nr_params) { + feat_csdev->params_csdev = devm_kcalloc(dev, feat_csdev->nr_params, + sizeof(struct cscfg_parameter_csdev), + GFP_KERNEL); + if (!feat_csdev->params_csdev) + return NULL; + + /* + * fill in the feature reference in the param - other fields + * handled by loader in csdev. + */ + for (i = 0; i < feat_csdev->nr_params; i++) + feat_csdev->params_csdev[i].feat_csdev = feat_csdev; + } + + /* + * Always have registers to program - again the load routine in csdev device + * will fill out according to feature descriptor and device requirements. + */ + feat_csdev->nr_regs = feat_desc->nr_regs; + feat_csdev->regs_csdev = devm_kcalloc(dev, feat_csdev->nr_regs, + sizeof(struct cscfg_regval_csdev), + GFP_KERNEL); + if (!feat_csdev->regs_csdev) + return NULL; + + /* load the feature default values */ + feat_csdev->feat_desc = feat_desc; + feat_csdev->csdev = csdev; + + return feat_csdev; +} + +/* load one feature into one coresight device */ +static int cscfg_load_feat_csdev(struct coresight_device *csdev, + struct cscfg_feature_desc *feat_desc, + struct cscfg_csdev_feat_ops *ops) +{ + struct cscfg_feature_csdev *feat_csdev; + int err; + + if (!ops->load_feat) + return -EINVAL; + + feat_csdev = cscfg_alloc_csdev_feat(csdev, feat_desc); + if (!feat_csdev) + return -ENOMEM; + + /* load the feature into the device */ + err = ops->load_feat(csdev, feat_csdev); + if (err) + return err; + + /* add to internal csdev feature list */ + mutex_lock(&cscfg_csdev_mutex); + list_add(&feat_csdev->node, &csdev->feature_csdev_list); + mutex_unlock(&cscfg_csdev_mutex); + + return 0; +} + +/* + * Add feature to any matching devices - call with mutex locked. + * Iterates through devices - any device that matches the feature will be + * called to load it. + */ +static int cscfg_add_feat_to_csdevs(struct cscfg_feature_desc *feat_desc) +{ + struct cscfg_registered_csdev *csdev_item; + int err; + + list_for_each_entry(csdev_item, &cscfg_mgr->csdev_desc_list, item) { + if (csdev_item->match_flags & feat_desc->match_flags) { + err = cscfg_load_feat_csdev(csdev_item->csdev, feat_desc, &csdev_item->ops); + if (err) + return err; + } + } + return 0; +} + /* check feature list for a named feature - call with mutex locked. */ static bool cscfg_match_list_feat(const char *name) { @@ -53,8 +246,14 @@ static int cscfg_check_feat_for_cfg(struct cscfg_config_desc *config_desc) */ static int cscfg_load_feat(struct cscfg_feature_desc *feat_desc) { - list_add(&feat_desc->item, &cscfg_mgr->feat_desc_list); + int err;
+ /* add feature to any matching registered devices */ + err = cscfg_add_feat_to_csdevs(feat_desc); + if (err) + return err; + + list_add(&feat_desc->item, &cscfg_mgr->feat_desc_list); return 0; }
@@ -71,6 +270,11 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) if (err) return err;
+ /* add config to any matching registered device */ + err = cscfg_add_cfg_to_csdevs(config_desc); + if (err) + return err; + list_add(&config_desc->item, &cscfg_mgr->config_desc_list); return 0; } @@ -125,6 +329,138 @@ int cscfg_load_config_sets(struct cscfg_config_desc **config_descs, } EXPORT_SYMBOL_GPL(cscfg_load_config_sets);
+/* Handle coresight device registration and add configs and features to devices */ + +/* iterate through config lists and load matching configs to device */ +static int cscfg_add_cfgs_csdev(struct coresight_device *csdev) +{ + struct cscfg_config_desc *config_desc; + int err = 0; + + list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) { + err = cscfg_add_csdev_cfg(csdev, config_desc); + if (err) + break; + } + return err; +} + +/* iterate through feature lists and load matching features to device */ +static int cscfg_add_feats_csdev(struct coresight_device *csdev, + u32 match_flags, + struct cscfg_csdev_feat_ops *ops) +{ + struct cscfg_feature_desc *feat_desc; + int err = 0; + + if (!ops->load_feat) + return -EINVAL; + + list_for_each_entry(feat_desc, &cscfg_mgr->feat_desc_list, item) { + if (feat_desc->match_flags & match_flags) { + err = cscfg_load_feat_csdev(csdev, feat_desc, ops); + if (err) + break; + } + } + return err; +} + +/* Add coresight device to list and copy its matching info */ +static int cscfg_list_add_csdev(struct coresight_device *csdev, + u32 match_flags, + struct cscfg_csdev_feat_ops *ops) +{ + struct cscfg_registered_csdev *csdev_item; + + /* allocate the list entry structure */ + csdev_item = kzalloc(sizeof(struct cscfg_registered_csdev), GFP_KERNEL); + if (!csdev_item) + return -ENOMEM; + + csdev_item->csdev = csdev; + csdev_item->match_flags = match_flags; + csdev_item->ops.load_feat = ops->load_feat; + list_add(&csdev_item->item, &cscfg_mgr->csdev_desc_list); + + INIT_LIST_HEAD(&csdev->feature_csdev_list); + INIT_LIST_HEAD(&csdev->config_csdev_list); + + return 0; +} + +/* remove a coresight device from the list and free data */ +static void cscfg_list_remove_csdev(struct coresight_device *csdev) +{ + struct cscfg_registered_csdev *csdev_item, *tmp; + + list_for_each_entry_safe(csdev_item, tmp, &cscfg_mgr->csdev_desc_list, item) { + if (csdev_item->csdev == csdev) { + list_del(&csdev_item->item); + kfree(csdev_item); + break; + } + } +} + +/** + * cscfg_register_csdev - register a coresight device with the syscfg manager. + * + * Registers the coresight device with the system. @match_flags used to check + * if the device is a match for registered features. Any currently registered + * configurations and features that match the device will be loaded onto it. + * + * @csdev: The coresight device to register. + * @match_flags: Matching information to load features. + * @ops: Standard operations supported by the device. + */ +int cscfg_register_csdev(struct coresight_device *csdev, + u32 match_flags, + struct cscfg_csdev_feat_ops *ops) +{ + int ret = 0; + + mutex_lock(&cscfg_mutex); + + /* add device to list of registered devices */ + ret = cscfg_list_add_csdev(csdev, match_flags, ops); + if (ret) + goto reg_csdev_unlock; + + /* now load any registered features and configs matching the device. */ + ret = cscfg_add_feats_csdev(csdev, match_flags, ops); + if (ret) { + cscfg_list_remove_csdev(csdev); + goto reg_csdev_unlock; + } + + ret = cscfg_add_cfgs_csdev(csdev); + if (ret) { + cscfg_list_remove_csdev(csdev); + goto reg_csdev_unlock; + } + + pr_info("CSCFG registered %s", dev_name(&csdev->dev)); + +reg_csdev_unlock: + mutex_unlock(&cscfg_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(cscfg_register_csdev); + +/** + * cscfg_unregister_csdev - remove coresight device from syscfg manager. + * + * @csdev: Device to remove. + */ +void cscfg_unregister_csdev(struct coresight_device *csdev) +{ + mutex_lock(&cscfg_mutex); + cscfg_list_remove_csdev(csdev); + mutex_unlock(&cscfg_mutex); +} +EXPORT_SYMBOL_GPL(cscfg_unregister_csdev); + /* Initialise system configuration management device. */
struct device *cscfg_device(void) diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h index 18be9b58cd0b..5bcae3b374c6 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.h +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -35,6 +35,22 @@ struct cscfg_manager { /* get reference to dev in cscfg_manager */ struct device *cscfg_device(void);
+/** + * List entry for Coresight devices that are registered as supporting complex + * config operations. + * + * @csdev: The registered device. + * @match_flags: The matching type information for adding features. + * @ops: Operations supported by the registered device. + * @item: list entry. + */ +struct cscfg_registered_csdev { + struct coresight_device *csdev; + u32 match_flags; + struct cscfg_csdev_feat_ops ops; + struct list_head item; +}; + /* internal core operations for cscfg */ int __init cscfg_init(void); void cscfg_exit(void); @@ -42,5 +58,8 @@ void cscfg_exit(void); /* syscfg manager external API */ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs, struct cscfg_feature_desc **feat_descs); +int cscfg_register_csdev(struct coresight_device *csdev, u32 match_flags, + struct cscfg_csdev_feat_ops *ops); +void cscfg_unregister_csdev(struct coresight_device *csdev);
#endif /* CORESIGHT_SYSCFG_H */ diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 85008a65e21f..6fb516e1b22e 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -220,6 +220,8 @@ struct coresight_sysfs_link { * @nr_links: number of sysfs links created to other components from this * device. These will appear in the "connections" group. * @has_conns_grp: Have added a "connections" group for sysfs links. + * @feature_csdev_list: List of complex feature programming added to the device. + * @config_csdev_list: List of system configurations added to the device. */ struct coresight_device { struct coresight_platform_data *pdata; @@ -241,6 +243,9 @@ struct coresight_device { int nr_links; bool has_conns_grp; bool ect_enabled; /* true only if associated ect device is enabled */ + /* system configuration and feature lists */ + struct list_head feature_csdev_list; + struct list_head config_csdev_list; };
/*
Adds a set of generic support functions that allow devices to set and save features values on the device, and enable and disable configurations.
Additional functions for other common operations including feature reset.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org --- drivers/hwtracing/coresight/Makefile | 2 +- .../hwtracing/coresight/coresight-config.c | 275 ++++++++++++++++++ .../hwtracing/coresight/coresight-config.h | 9 + .../hwtracing/coresight/coresight-syscfg.c | 3 +- 4 files changed, 287 insertions(+), 2 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-config.c
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index 3d037f17aade..63ecfc3cf66d 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -4,7 +4,7 @@ # obj-$(CONFIG_CORESIGHT) += coresight.o coresight-y := coresight-core.o coresight-etm-perf.o coresight-platform.o \ - coresight-sysfs.o coresight-syscfg.o + coresight-sysfs.o coresight-syscfg.o coresight-config.o obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o coresight-tmc-y := coresight-tmc-core.o coresight-tmc-etf.o \ coresight-tmc-etr.o diff --git a/drivers/hwtracing/coresight/coresight-config.c b/drivers/hwtracing/coresight/coresight-config.c new file mode 100644 index 000000000000..3c501e027bc0 --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-config.c @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright(C) 2020 Linaro Limited. All rights reserved. + * Author: Mike Leach mike.leach@linaro.org + */ + +#include <linux/sysfs.h> +#include "coresight-config.h" +#include "coresight-priv.h" + +/* + * This provides a set of generic functions that operate on configurations + * and features to manage the handling of parameters, the programming and + * saving of registers used by features on devices. + */ + +/* + * Write the value held in the register structure into the driver internal memory + * location. + */ +static void cscfg_set_reg(struct cscfg_regval_csdev *reg_csdev) +{ + u32 *p_val32 = (u32 *)reg_csdev->driver_regval; + u32 tmp32 = reg_csdev->reg_desc.val32; + + if (reg_csdev->reg_desc.type & CS_CFG_REG_TYPE_VAL_64BIT) { + *((u64 *)reg_csdev->driver_regval) = reg_csdev->reg_desc.val64; + return; + } + + if (reg_csdev->reg_desc.type & CS_CFG_REG_TYPE_VAL_MASK) { + tmp32 = *p_val32; + tmp32 &= ~reg_csdev->reg_desc.mask32; + tmp32 |= reg_csdev->reg_desc.val32 & reg_csdev->reg_desc.mask32; + } + *p_val32 = tmp32; +} + +/* + * Read the driver value into the reg if this is marked as one we want to save. + */ +static void cscfg_save_reg(struct cscfg_regval_csdev *reg_csdev) +{ + if (!(reg_csdev->reg_desc.type & CS_CFG_REG_TYPE_VAL_SAVE)) + return; + if (reg_csdev->reg_desc.type & CS_CFG_REG_TYPE_VAL_64BIT) + reg_csdev->reg_desc.val64 = *(u64 *)(reg_csdev->driver_regval); + else + reg_csdev->reg_desc.val32 = *(u32 *)(reg_csdev->driver_regval); +} + +/* + * Some register values are set from parameters. Initialise these registers + * from the current parameter values. + */ +static void cscfg_init_reg_param(struct cscfg_feature_csdev *feat_csdev, + struct cscfg_regval_desc *reg_desc, + struct cscfg_regval_csdev *reg_csdev) +{ + struct cscfg_parameter_csdev *param_csdev; + + /* for param, load routines have validated the index */ + param_csdev = &feat_csdev->params_csdev[reg_desc->param_idx]; + param_csdev->reg_csdev = reg_csdev; + param_csdev->val64 = reg_csdev->reg_desc.type & CS_CFG_REG_TYPE_VAL_64BIT; + + if (param_csdev->val64) + reg_csdev->reg_desc.val64 = param_csdev->current_value; + else + reg_csdev->reg_desc.val32 = (u32)param_csdev->current_value; +} + +/* set values into the driver locations referenced in cscfg_reg_csdev */ +static int cscfg_set_on_enable(struct cscfg_feature_csdev *feat_csdev) +{ + int i; + + spin_lock(feat_csdev->drv_spinlock); + for (i = 0; i < feat_csdev->nr_regs; i++) + cscfg_set_reg(&feat_csdev->regs_csdev[i]); + spin_unlock(feat_csdev->drv_spinlock); + dev_dbg(&feat_csdev->csdev->dev, "Feature %s: %s", + feat_csdev->feat_desc->name, "set on enable"); + return 0; +} + +/* copy back values from the driver locations referenced in cscfg_reg_csdev */ +static void cscfg_save_on_disable(struct cscfg_feature_csdev *feat_csdev) +{ + int i; + + spin_lock(feat_csdev->drv_spinlock); + for (i = 0; i < feat_csdev->nr_regs; i++) + cscfg_save_reg(&feat_csdev->regs_csdev[i]); + spin_unlock(feat_csdev->drv_spinlock); + dev_dbg(&feat_csdev->csdev->dev, "Feature %s: %s", + feat_csdev->feat_desc->name, "save on disable"); +} + +/* default reset - restore default values */ +void cscfg_reset_feat(struct cscfg_feature_csdev *feat_csdev) +{ + struct cscfg_regval_desc *reg_desc; + struct cscfg_regval_csdev *reg_csdev; + int i; + + /* + * set the default values for all parameters and regs from the + * relevant static descriptors. + */ + for (i = 0; i < feat_csdev->nr_params; i++) + feat_csdev->params_csdev[i].current_value = + feat_csdev->feat_desc->params_desc[i].value; + + for (i = 0; i < feat_csdev->nr_regs; i++) { + reg_desc = &feat_csdev->feat_desc->regs_desc[i]; + reg_csdev = &feat_csdev->regs_csdev[i]; + reg_csdev->reg_desc.type = reg_desc->type; + + /* check if reg set from a parameter otherwise desc default */ + if (reg_desc->type & CS_CFG_REG_TYPE_VAL_PARAM) + cscfg_init_reg_param(feat_csdev, reg_desc, reg_csdev); + else + /* + * for normal values the union between val64 & val32 + mask32 + * allows us to init using the 64 bit value + */ + reg_csdev->reg_desc.val64 = reg_desc->val64; + } +} + +/* + * For the selected presets, we set the register associated with the parameter, to + * the value of the preset index associated with the parameter. + */ +static int cscfg_update_presets(struct cscfg_config_csdev *config_csdev, int preset) +{ + int i, j, val_idx = 0, nr_cfg_params; + struct cscfg_parameter_csdev *param_csdev; + struct cscfg_feature_csdev *feat_csdev; + const struct cscfg_config_desc *config_desc = config_csdev->config_desc; + const char *name; + const u64 *preset_base; + u64 val; + + /* preset in range 1 to nr_presets */ + if (preset < 1 || preset > config_desc->nr_presets) + return -EINVAL; + /* + * Go through the array of features, assigning preset values to + * feature parameters in the order they appear. + * There should be precisely the same number of preset values as the + * sum of number of parameters over all the features - but we will + * ensure there is no overrun. + */ + nr_cfg_params = config_desc->nr_total_params; + preset_base = &config_desc->presets[(preset - 1) * nr_cfg_params]; + for (i = 0; i < config_csdev->nr_feat; i++) { + feat_csdev = config_csdev->feats_csdev[i]; + if (!feat_csdev->nr_params) + continue; + + for (j = 0; j < feat_csdev->nr_params; j++) { + param_csdev = &feat_csdev->params_csdev[j]; + name = feat_csdev->feat_desc->params_desc[j].name; + val = preset_base[val_idx++]; + if (param_csdev->val64) { + dev_dbg(&config_csdev->csdev->dev, + "set param %s (%lld)", name, val); + param_csdev->reg_csdev->reg_desc.val64 = val; + } else { + param_csdev->reg_csdev->reg_desc.val32 = (u32)val; + dev_dbg(&config_csdev->csdev->dev, + "set param %s (%d)", name, (u32)val); + } + } + + /* exit early if all params filled */ + if (val_idx >= nr_cfg_params) + break; + } + return 0; +} + +/* + * if we are not using a preset, then need to update the feature params + * with current values. This sets the register associated with the parameter + * with the current value of that parameter. + */ +static int cscfg_update_curr_params(struct cscfg_config_csdev *config_csdev) +{ + int i, j; + struct cscfg_feature_csdev *feat_csdev; + struct cscfg_parameter_csdev *param_csdev; + const char *name; + u64 val; + + for (i = 0; i < config_csdev->nr_feat; i++) { + feat_csdev = config_csdev->feats_csdev[i]; + if (!feat_csdev->nr_params) + continue; + for (j = 0; j < feat_csdev->nr_params; j++) { + param_csdev = &feat_csdev->params_csdev[j]; + name = feat_csdev->feat_desc->params_desc[j].name; + val = param_csdev->current_value; + if (param_csdev->val64) { + dev_dbg(&config_csdev->csdev->dev, + "set param %s (%lld)", name, val); + param_csdev->reg_csdev->reg_desc.val64 = val; + } else { + param_csdev->reg_csdev->reg_desc.val32 = (u32)val; + dev_dbg(&config_csdev->csdev->dev, + "set param %s (%d)", name, (u32)val); + } + } + } + return 0; +} + +/* + * Configuration values will be programmed into the driver locations if enabling, or read + * from relevant locations on disable. + */ +static int cscfg_prog_config(struct cscfg_config_csdev *config_csdev, bool enable) +{ + int i, err = 0; + struct cscfg_feature_csdev *feat_csdev; + struct coresight_device *csdev; + + for (i = 0; i < config_csdev->nr_feat; i++) { + feat_csdev = config_csdev->feats_csdev[i]; + csdev = feat_csdev->csdev; + dev_dbg(&csdev->dev, "cfg %s; %s feature:%s", config_csdev->config_desc->name, + enable ? "enable" : "disable", feat_csdev->feat_desc->name); + + if (enable) + err = cscfg_set_on_enable(feat_csdev); + else + cscfg_save_on_disable(feat_csdev); + + if (err) + break; + } + return err; +} + +/* + * Enable configuration for the device. Will result in the internal driver data + * being updated ready for programming into the device. + * + * @config_csdev: config_csdev to set. + * @preset: preset values to use - 0 for default. + */ +int cscfg_csdev_enable_config(struct cscfg_config_csdev *config_csdev, int preset) +{ + int err = 0; + + if (preset) + err = cscfg_update_presets(config_csdev, preset); + else + err = cscfg_update_curr_params(config_csdev); + if (!err) + err = cscfg_prog_config(config_csdev, true); + if (!err) + config_csdev->enabled = true; + return err; +} + +void cscfg_csdev_disable_config(struct cscfg_config_csdev *config_csdev) +{ + if (config_csdev->enabled) { + cscfg_prog_config(config_csdev, false); + config_csdev->enabled = false; + } +} diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h index 685fb46ce893..5a39cbbc38a4 100644 --- a/drivers/hwtracing/coresight/coresight-config.h +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -237,4 +237,13 @@ struct cscfg_csdev_feat_ops { struct cscfg_feature_csdev *feat_csdev); };
+/* coresight config helper functions*/ + +/* enable / disable config on a device - called with appropriate locks set.*/ +int cscfg_csdev_enable_config(struct cscfg_config_csdev *config_csdev, int preset); +void cscfg_csdev_disable_config(struct cscfg_config_csdev *config_csdev); + +/* reset a feature to default values */ +void cscfg_reset_feat(struct cscfg_feature_csdev *feat_csdev); + #endif /* _CORESIGHT_CORESIGHT_CONFIG_H */ diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index e93e62c1efbb..c7f48d6b48f5 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -190,9 +190,10 @@ static int cscfg_load_feat_csdev(struct coresight_device *csdev, if (err) return err;
- /* add to internal csdev feature list */ + /* add to internal csdev feature list & initialise using reset call */ mutex_lock(&cscfg_csdev_mutex); list_add(&feat_csdev->node, &csdev->feature_csdev_list); + cscfg_reset_feat(feat_csdev); mutex_unlock(&cscfg_csdev_mutex);
return 0;
Loaded coresight configurations are registered in the cs_etm\events sub directory. This extends the etm-perf code to handle these registrations, and the cs_syscfg driver to perform the registration on load.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org --- .../hwtracing/coresight/coresight-config.h | 2 + .../hwtracing/coresight/coresight-etm-perf.c | 134 ++++++++++++++---- .../hwtracing/coresight/coresight-etm-perf.h | 8 ++ .../hwtracing/coresight/coresight-syscfg.c | 11 ++ 4 files changed, 127 insertions(+), 28 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h index 5a39cbbc38a4..0667581822c1 100644 --- a/drivers/hwtracing/coresight/coresight-config.h +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -126,6 +126,7 @@ struct cscfg_feature_desc { * @nr_presets: Number of sets of presets supplied by this configuration. * @nr_total_params: Sum of all parameters declared by used features * @presets: Array of preset values. + * @event_ea: Extended attribute for perf event value * */ struct cscfg_config_desc { @@ -137,6 +138,7 @@ struct cscfg_config_desc { int nr_presets; int nr_total_params; const u64 *presets; /* nr_presets * nr_total_params */ + struct dev_ext_attribute *event_ea; };
/** diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 15310c72f89f..26b4bca156aa 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -18,8 +18,10 @@ #include <linux/types.h> #include <linux/workqueue.h>
+#include "coresight-config.h" #include "coresight-etm-perf.h" #include "coresight-priv.h" +#include "coresight-syscfg.h"
static struct pmu etm_pmu; static bool etm_perf_up; @@ -57,8 +59,13 @@ PMU_FORMAT_ATTR(contextid1, "config:" __stringify(ETM_OPT_CTXTID)); PMU_FORMAT_ATTR(contextid2, "config:" __stringify(ETM_OPT_CTXTID2)); PMU_FORMAT_ATTR(timestamp, "config:" __stringify(ETM_OPT_TS)); PMU_FORMAT_ATTR(retstack, "config:" __stringify(ETM_OPT_RETSTK)); +/* preset - if sink ID is used as a configuration selector */ +PMU_FORMAT_ATTR(preset, "config:0-3"); /* Sink ID - same for all ETMs */ PMU_FORMAT_ATTR(sinkid, "config2:0-31"); +/* config ID - set if a system configuration is selected */ +PMU_FORMAT_ATTR(configid, "config2:32-63"); +
/* * contextid always traces the "PID". The PID is in CONTEXTIDR_EL1 @@ -88,6 +95,8 @@ static struct attribute *etm_config_formats_attr[] = { &format_attr_timestamp.attr, &format_attr_retstack.attr, &format_attr_sinkid.attr, + &format_attr_preset.attr, + &format_attr_configid.attr, NULL, };
@@ -105,9 +114,19 @@ static const struct attribute_group etm_pmu_sinks_group = { .attrs = etm_config_sinks_attr, };
+static struct attribute *etm_config_events_attr[] = { + NULL, +}; + +static const struct attribute_group etm_pmu_events_group = { + .name = "events", + .attrs = etm_config_events_attr, +}; + static const struct attribute_group *etm_pmu_attr_groups[] = { &etm_pmu_format_group, &etm_pmu_sinks_group, + &etm_pmu_events_group, NULL, };
@@ -286,7 +305,7 @@ static void *etm_setup_aux(struct perf_event *event, void **pages, INIT_WORK(&event_data->work, free_event_data);
/* First get the selected sink from user space. */ - if (event->attr.config2) { + if (event->attr.config2 & GENMASK_ULL(31, 0)) { id = (u32)event->attr.config2; sink = user_sink = coresight_get_sink_by_id(id); } @@ -658,68 +677,127 @@ static ssize_t etm_perf_sink_name_show(struct device *dev, return scnprintf(buf, PAGE_SIZE, "0x%lx\n", (unsigned long)(ea->var)); }
-int etm_perf_add_symlink_sink(struct coresight_device *csdev) +static struct dev_ext_attribute * +etm_perf_add_symlink_group(struct device *dev, const char *name, const char *group_name) { - int ret; + struct dev_ext_attribute *ea; unsigned long hash; - const char *name; + int ret; struct device *pmu_dev = etm_pmu.dev; - struct device *dev = &csdev->dev; - struct dev_ext_attribute *ea; - - if (csdev->type != CORESIGHT_DEV_TYPE_SINK && - csdev->type != CORESIGHT_DEV_TYPE_LINKSINK) - return -EINVAL; - - if (csdev->ea != NULL) - return -EINVAL;
if (!etm_perf_up) - return -EPROBE_DEFER; + return ERR_PTR(-EPROBE_DEFER);
ea = devm_kzalloc(dev, sizeof(*ea), GFP_KERNEL); if (!ea) - return -ENOMEM; + return ERR_PTR(-ENOMEM);
- name = dev_name(dev); - /* See function coresight_get_sink_by_id() to know where this is used */ + /* + * If this function is called adding a sink then the hash is used for + * sink selection - see function coresight_get_sink_by_id(). + * If adding a configuration then the hash is used for selection in + * cscfg_activate_config() + */ hash = hashlen_hash(hashlen_string(NULL, name));
sysfs_attr_init(&ea->attr.attr); ea->attr.attr.name = devm_kstrdup(dev, name, GFP_KERNEL); if (!ea->attr.attr.name) - return -ENOMEM; + return ERR_PTR(-ENOMEM);
ea->attr.attr.mode = 0444; - ea->attr.show = etm_perf_sink_name_show; ea->var = (unsigned long *)hash;
ret = sysfs_add_file_to_group(&pmu_dev->kobj, - &ea->attr.attr, "sinks"); + &ea->attr.attr, group_name);
- if (!ret) - csdev->ea = ea; + return ret ? ERR_PTR(ret) : ea; +}
- return ret; +int etm_perf_add_symlink_sink(struct coresight_device *csdev) +{ + const char *name; + struct device *dev = &csdev->dev; + int err = 0; + + if (csdev->type != CORESIGHT_DEV_TYPE_SINK && + csdev->type != CORESIGHT_DEV_TYPE_LINKSINK) + return -EINVAL; + + if (csdev->ea != NULL) + return -EINVAL; + + name = dev_name(dev); + csdev->ea = etm_perf_add_symlink_group(dev, name, "sinks"); + if (IS_ERR(csdev->ea)) { + err = PTR_ERR(csdev->ea); + csdev->ea = NULL; + } else + csdev->ea->attr.show = etm_perf_sink_name_show; + + return err; }
-void etm_perf_del_symlink_sink(struct coresight_device *csdev) +static void etm_perf_del_symlink_group(struct dev_ext_attribute *ea, const char *group_name) { struct device *pmu_dev = etm_pmu.dev; - struct dev_ext_attribute *ea = csdev->ea;
+ sysfs_remove_file_from_group(&pmu_dev->kobj, + &ea->attr.attr, group_name); +} + +void etm_perf_del_symlink_sink(struct coresight_device *csdev) +{ if (csdev->type != CORESIGHT_DEV_TYPE_SINK && csdev->type != CORESIGHT_DEV_TYPE_LINKSINK) return;
- if (!ea) + if (!csdev->ea) return;
- sysfs_remove_file_from_group(&pmu_dev->kobj, - &ea->attr.attr, "sinks"); + etm_perf_del_symlink_group(csdev->ea, "sinks"); csdev->ea = NULL; }
+static ssize_t etm_perf_cscfg_event_show(struct device *dev, + struct device_attribute *dattr, + char *buf) +{ + struct dev_ext_attribute *ea; + + ea = container_of(dattr, struct dev_ext_attribute, attr); + return scnprintf(buf, PAGE_SIZE, "configid=0x%lx\n", (unsigned long)(ea->var)); +} + +int etm_perf_add_symlink_cscfg(struct device *dev, struct cscfg_config_desc *config_desc) +{ + int err = 0; + + if (config_desc->event_ea != NULL) + return 0; + + config_desc->event_ea = etm_perf_add_symlink_group(dev, config_desc->name, "events"); + + /* set the show function to the custom cscfg event */ + if (!IS_ERR(config_desc->event_ea)) + config_desc->event_ea->attr.show = etm_perf_cscfg_event_show; + else { + err = PTR_ERR(config_desc->event_ea); + config_desc->event_ea = NULL; + } + + return err; +} + +void etm_perf_del_symlink_cscfg(struct cscfg_config_desc *config_desc) +{ + if (!config_desc->event_ea) + return; + + etm_perf_del_symlink_group(config_desc->event_ea, "events"); + config_desc->event_ea = NULL; +} + int __init etm_perf_init(void) { int ret; diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.h b/drivers/hwtracing/coresight/coresight-etm-perf.h index 29d90dfeba31..ba617fe2217e 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.h +++ b/drivers/hwtracing/coresight/coresight-etm-perf.h @@ -11,6 +11,7 @@ #include "coresight-priv.h"
struct coresight_device; +struct cscfg_config_desc;
/* * In both ETMv3 and v4 the maximum number of address comparator implentable @@ -69,6 +70,9 @@ static inline void *etm_perf_sink_config(struct perf_output_handle *handle) return data->snk_config; return NULL; } +int etm_perf_add_symlink_cscfg(struct device *dev, + struct cscfg_config_desc *config_desc); +void etm_perf_del_symlink_cscfg(struct cscfg_config_desc *config_desc); #else static inline int etm_perf_symlink(struct coresight_device *csdev, bool link) { return -EINVAL; } @@ -79,6 +83,10 @@ static inline void *etm_perf_sink_config(struct perf_output_handle *handle) { return NULL; } +int etm_perf_add_symlink_cscfg(struct device *dev, + struct cscfg_config_desc *config_desc) +{ return -EINVAL; } +void etm_perf_del_symlink_cscfg(struct cscfg_config_desc *config_desc) {}
#endif /* CONFIG_CORESIGHT */
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index c7f48d6b48f5..e35f8c0ac2f8 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -7,6 +7,7 @@ #include <linux/platform_device.h>
#include "coresight-config.h" +#include "coresight-etm-perf.h" #include "coresight-syscfg.h"
/* @@ -276,6 +277,11 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) if (err) return err;
+ /* add config to perf fs to allow selection */ + err = etm_perf_add_symlink_cscfg(cscfg_device(), config_desc); + if (err) + return err; + list_add(&config_desc->item, &cscfg_mgr->config_desc_list); return 0; } @@ -508,7 +514,12 @@ static int cscfg_create_device(void)
static void cscfg_clear_device(void) { + struct cscfg_config_desc *cfg_desc; + mutex_lock(&cscfg_mutex); + list_for_each_entry(cfg_desc, &cscfg_mgr->config_desc_list, item) { + etm_perf_del_symlink_cscfg(cfg_desc); + } device_unregister(cscfg_device()); mutex_unlock(&cscfg_mutex); }
Configurations are first activated, then when any coresight device is enabled, the active configurations are checked and any matching one is enabled.
This patch provides the activation / enable API.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org --- .../hwtracing/coresight/coresight-config.h | 2 + .../hwtracing/coresight/coresight-syscfg.c | 172 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 8 + include/linux/coresight.h | 2 + 4 files changed, 184 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h index 0667581822c1..25eb6c632692 100644 --- a/drivers/hwtracing/coresight/coresight-config.h +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -127,6 +127,7 @@ struct cscfg_feature_desc { * @nr_total_params: Sum of all parameters declared by used features * @presets: Array of preset values. * @event_ea: Extended attribute for perf event value + * @active_cnt: ref count for activate on this configuration. * */ struct cscfg_config_desc { @@ -139,6 +140,7 @@ struct cscfg_config_desc { int nr_total_params; const u64 *presets; /* nr_presets * nr_total_params */ struct dev_ext_attribute *event_ea; + atomic_t active_cnt; };
/** diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index e35f8c0ac2f8..b234e45c153f 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -283,6 +283,7 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) return err;
list_add(&config_desc->item, &cscfg_mgr->config_desc_list); + atomic_set(&config_desc->active_cnt, 0); return 0; }
@@ -468,6 +469,176 @@ void cscfg_unregister_csdev(struct coresight_device *csdev) } EXPORT_SYMBOL_GPL(cscfg_unregister_csdev);
+/** + * cscfg_csdev_reset_feats - reset features for a CoreSight device. + * + * Resets all parameters and register values for any features loaded + * into @csdev to their default values. + * + * @csdev: The CoreSight device. + */ +void cscfg_csdev_reset_feats(struct coresight_device *csdev) +{ + struct cscfg_feature_csdev *feat_csdev; + + mutex_lock(&cscfg_csdev_mutex); + if (list_empty(&csdev->feature_csdev_list)) + goto unlock_exit; + + list_for_each_entry(feat_csdev, &csdev->feature_csdev_list, node) + cscfg_reset_feat(feat_csdev); + +unlock_exit: + mutex_unlock(&cscfg_csdev_mutex); +} +EXPORT_SYMBOL_GPL(cscfg_csdev_reset_feats); + +/** + * cscfg_activate_config - Mark a configuration descriptor as active. + * + * This will be seen when csdev devices are enabled in the system. + * Only activated configurations can be enabled on individual devices. + * Activation protects the configuration from alteration or removal while + * active. + * + * Selection by hash value - generated from the configuration name when it + * was loaded and added to the cs_etm/configurations file system for selection + * by perf. + * + * Increments the configuration descriptor active count and the global active + * count. + * + * @cfg_hash: Hash value of the selected configuration name. + */ +int cscfg_activate_config(unsigned long cfg_hash) +{ + struct cscfg_config_desc *config_desc; + int err = -EINVAL; + + mutex_lock(&cscfg_mutex); + + list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) { + if ((unsigned long)config_desc->event_ea->var == cfg_hash) { + /* + * increment the global active count - control changes to + * active configurations + */ + atomic_inc(&cscfg_mgr->sys_active_cnt); + + /* + * mark the descriptor as active so enable config on a + * device instance will use it + */ + atomic_inc(&config_desc->active_cnt); + + err = 0; + dev_dbg(cscfg_device(), "Activate config %s.\n", config_desc->name); + break; + } + } + mutex_unlock(&cscfg_mutex); + + return err; +} +EXPORT_SYMBOL_GPL(cscfg_activate_config); + +/** + * cscfg_deactivate_config - Mark a config descriptor as inactive. + * + * Decrement the configuration and global active counts. + * + * @cfg_hash: Hash value of the selected configuration name. + */ +void cscfg_deactivate_config(unsigned long cfg_hash) +{ + struct cscfg_config_desc *config_desc; + + mutex_lock(&cscfg_mutex); + + list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) { + if ((unsigned long)config_desc->event_ea->var == cfg_hash) { + atomic_dec(&config_desc->active_cnt); + atomic_dec(&cscfg_mgr->sys_active_cnt); + dev_dbg(cscfg_device(), "Deactivate config %s.\n", config_desc->name); + break; + } + } + mutex_unlock(&cscfg_mutex); +} +EXPORT_SYMBOL_GPL(cscfg_deactivate_config); + +/** + * cscfg_csdev_enable_active_config - Enable matching active configuration for device. + * + * Enables the configuration selected by @cfg_hash if the configuration is supported + * on the device and has been activated. + * + * If active and supported the CoreSight device @csdev will be programmed with the + * configuration, using @preset parameters. + * + * Should be called before driver hardware enable for the requested device, prior to + * programming and enabling the physical hardware. + * + * @csdev: CoreSight device to program. + * @cfg_hash: Selector for the configuration. + * @preset: Preset parameter values to use, 0 for current / default values. + */ +int cscfg_csdev_enable_active_config(struct coresight_device *csdev, + unsigned long cfg_hash, int preset) +{ + struct cscfg_config_csdev *config_csdev_active = NULL, *config_csdev_item; + const struct cscfg_config_desc *config_desc; + int err = 0; + + /* quickly check global count */ + if (!atomic_read(&cscfg_mgr->sys_active_cnt)) + return 0; + + mutex_lock(&cscfg_csdev_mutex); + list_for_each_entry(config_csdev_item, &csdev->config_csdev_list, node) { + config_desc = config_csdev_item->config_desc; + if ((atomic_read(&config_desc->active_cnt)) && + ((unsigned long)config_desc->event_ea->var == cfg_hash)) { + config_csdev_active = config_csdev_item; + break; + } + } + if (config_csdev_active) { + err = cscfg_csdev_enable_config(config_csdev_active, preset); + if (!err) + csdev->active_cscfg_ctxt = (void *)config_csdev_active; + } + mutex_unlock(&cscfg_csdev_mutex); + return err; +} +EXPORT_SYMBOL_GPL(cscfg_csdev_enable_active_config); + +/** + * cscfg_csdev_disable_active_config - disable an active config on the device. + * + * Disables the active configuration on the CoreSight device @csdev. + * Disable will save the values of any registers marked in the configurations + * as save on disable. + * + * Should be called after driver hardware disable for the requested device, + * after disabling the physical hardware and reading back registers. + * + * @csdev: The CoreSight device. + */ +void cscfg_csdev_disable_active_config(struct coresight_device *csdev) +{ + struct cscfg_config_csdev *config_csdev; + + mutex_lock(&cscfg_csdev_mutex); + config_csdev = (struct cscfg_config_csdev *)csdev->active_cscfg_ctxt; + if (config_csdev) { + cscfg_csdev_disable_config(config_csdev); + csdev->active_cscfg_ctxt = NULL; + } + mutex_unlock(&cscfg_csdev_mutex); +} +EXPORT_SYMBOL_GPL(cscfg_csdev_disable_active_config); + /* Initialise system configuration management device. */
struct device *cscfg_device(void) @@ -536,6 +707,7 @@ int __init cscfg_init(void) INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); INIT_LIST_HEAD(&cscfg_mgr->config_desc_list); + atomic_set(&cscfg_mgr->sys_active_cnt, 0);
dev_info(cscfg_device(), "CoreSight Configuration manager initialised"); return 0; diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h index 5bcae3b374c6..a52775890670 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.h +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -24,12 +24,14 @@ * @csdev_desc_list: List of coresight devices registered with the configuration manager. * @feat_desc_list: List of feature descriptors to load into registered devices. * @config_desc_list: List of system configuration descriptors to load into registered devices. + * @sys_active_cnt: Total number of active config descriptor references. */ struct cscfg_manager { struct device dev; struct list_head csdev_desc_list; struct list_head feat_desc_list; struct list_head config_desc_list; + atomic_t sys_active_cnt; };
/* get reference to dev in cscfg_manager */ @@ -61,5 +63,11 @@ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs, int cscfg_register_csdev(struct coresight_device *csdev, u32 match_flags, struct cscfg_csdev_feat_ops *ops); void cscfg_unregister_csdev(struct coresight_device *csdev); +int cscfg_activate_config(unsigned long cfg_hash); +void cscfg_deactivate_config(unsigned long cfg_hash); +void cscfg_csdev_reset_feats(struct coresight_device *csdev); +int cscfg_csdev_enable_active_config(struct coresight_device *csdev, + unsigned long cfg_hash, int preset); +void cscfg_csdev_disable_active_config(struct coresight_device *csdev);
#endif /* CORESIGHT_SYSCFG_H */ diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 6fb516e1b22e..a348049ee08b 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -222,6 +222,7 @@ struct coresight_sysfs_link { * @has_conns_grp: Have added a "connections" group for sysfs links. * @feature_csdev_list: List of complex feature programming added to the device. * @config_csdev_list: List of system configurations added to the device. + * @active_cscfg_ctxt: Context information for current active system configuration. */ struct coresight_device { struct coresight_platform_data *pdata; @@ -246,6 +247,7 @@ struct coresight_device { /* system configuration and feature lists */ struct list_head feature_csdev_list; struct list_head config_csdev_list; + void *active_cscfg_ctxt; };
/*
On 4/14/21 8:18 PM, Mike Leach wrote:
Configurations are first activated, then when any coresight device is enabled, the active configurations are checked and any matching one is enabled.
This patch provides the activation / enable API.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org
.../hwtracing/coresight/coresight-config.h | 2 + .../hwtracing/coresight/coresight-syscfg.c | 172 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 8 + include/linux/coresight.h | 2 + 4 files changed, 184 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h index 0667581822c1..25eb6c632692 100644 --- a/drivers/hwtracing/coresight/coresight-config.h +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -127,6 +127,7 @@ struct cscfg_feature_desc {
- @nr_total_params: Sum of all parameters declared by used features
- @presets: Array of preset values.
- @event_ea: Extended attribute for perf event value
*/ struct cscfg_config_desc {
- @active_cnt: ref count for activate on this configuration.
@@ -139,6 +140,7 @@ struct cscfg_config_desc { int nr_total_params; const u64 *presets; /* nr_presets * nr_total_params */ struct dev_ext_attribute *event_ea;
- atomic_t active_cnt; };
/** diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index e35f8c0ac2f8..b234e45c153f 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -283,6 +283,7 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) return err; list_add(&config_desc->item, &cscfg_mgr->config_desc_list);
- atomic_set(&config_desc->active_cnt, 0); return 0; }
@@ -468,6 +469,176 @@ void cscfg_unregister_csdev(struct coresight_device *csdev) } EXPORT_SYMBOL_GPL(cscfg_unregister_csdev); +/**
- cscfg_csdev_reset_feats - reset features for a CoreSight device.
- Resets all parameters and register values for any features loaded
- into @csdev to their default values.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_reset_feats(struct coresight_device *csdev) +{
- struct cscfg_feature_csdev *feat_csdev;
- mutex_lock(&cscfg_csdev_mutex);
- if (list_empty(&csdev->feature_csdev_list))
goto unlock_exit;
- list_for_each_entry(feat_csdev, &csdev->feature_csdev_list, node)
cscfg_reset_feat(feat_csdev);
+unlock_exit:
- mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_reset_feats);
+/**
- cscfg_activate_config - Mark a configuration descriptor as active.
- This will be seen when csdev devices are enabled in the system.
- Only activated configurations can be enabled on individual devices.
- Activation protects the configuration from alteration or removal while
- active.
- Selection by hash value - generated from the configuration name when it
- was loaded and added to the cs_etm/configurations file system for selection
- by perf.
- Increments the configuration descriptor active count and the global active
- count.
- @cfg_hash: Hash value of the selected configuration name.
- */
+int cscfg_activate_config(unsigned long cfg_hash) +{
- struct cscfg_config_desc *config_desc;
- int err = -EINVAL;
- mutex_lock(&cscfg_mutex);
- list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
/*
* increment the global active count - control changes to
* active configurations
*/
atomic_inc(&cscfg_mgr->sys_active_cnt);
/*
* mark the descriptor as active so enable config on a
* device instance will use it
*/
atomic_inc(&config_desc->active_cnt);
err = 0;
dev_dbg(cscfg_device(), "Activate config %s.\n", config_desc->name);
break;
}
- }
- mutex_unlock(&cscfg_mutex);
- return err;
+} +EXPORT_SYMBOL_GPL(cscfg_activate_config);
+/**
- cscfg_deactivate_config - Mark a config descriptor as inactive.
- Decrement the configuration and global active counts.
- @cfg_hash: Hash value of the selected configuration name.
- */
+void cscfg_deactivate_config(unsigned long cfg_hash) +{
- struct cscfg_config_desc *config_desc;
- mutex_lock(&cscfg_mutex);
- list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
atomic_dec(&config_desc->active_cnt);
atomic_dec(&cscfg_mgr->sys_active_cnt);
dev_dbg(cscfg_device(), "Deactivate config %s.\n", config_desc->name);
break;
}
- }
- mutex_unlock(&cscfg_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_deactivate_config);
+/**
- cscfg_csdev_enable_active_config - Enable matching active configuration for device.
- Enables the configuration selected by @cfg_hash if the configuration is supported
- on the device and has been activated.
- If active and supported the CoreSight device @csdev will be programmed with the
- configuration, using @preset parameters.
- Should be called before driver hardware enable for the requested device, prior to
- programming and enabling the physical hardware.
- @csdev: CoreSight device to program.
- @cfg_hash: Selector for the configuration.
- @preset: Preset parameter values to use, 0 for current / default values.
- */
+int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset)
+{
- struct cscfg_config_csdev *config_csdev_active = NULL, *config_csdev_item;
- const struct cscfg_config_desc *config_desc;
- int err = 0;
- /* quickly check global count */
- if (!atomic_read(&cscfg_mgr->sys_active_cnt))
return 0;
- mutex_lock(&cscfg_csdev_mutex);
- list_for_each_entry(config_csdev_item, &csdev->config_csdev_list, node) {
config_desc = config_csdev_item->config_desc;
if ((atomic_read(&config_desc->active_cnt)) &&
((unsigned long)config_desc->event_ea->var == cfg_hash)) {
config_csdev_active = config_csdev_item;
break;
}
- }
- if (config_csdev_active) {
err = cscfg_csdev_enable_config(config_csdev_active, preset);
if (!err)
csdev->active_cscfg_ctxt = (void *)config_csdev_active;
- }
- mutex_unlock(&cscfg_csdev_mutex);
- return err;
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_enable_active_config);
+/**
- cscfg_csdev_disable_active_config - disable an active config on the device.
- Disables the active configuration on the CoreSight device @csdev.
- Disable will save the values of any registers marked in the configurations
- as save on disable.
- Should be called after driver hardware disable for the requested device,
- after disabling the physical hardware and reading back registers.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev) +{
- struct cscfg_config_csdev *config_csdev;
- mutex_lock(&cscfg_csdev_mutex);
This line seems to cause a bug report when the kernel is compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y
I have tested this by applying the series to 5.10 kernel on Dragonboard 845c.
It only happens when strobing is used.
The report is this:
[13431.885395] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 [13431.893919] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 3525, name: perf [13431.901882] CPU: 0 PID: 3525 Comm: perf Tainted: G W 5.10.0-rc5-17282-g923b456a55fb #124 [13431.911436] Hardware name: Thundercomm Dragonboard 845c (DT) [13431.917450] Call trace: [13431.919938] dump_backtrace+0x0/0x1a0 [13431.923644] show_stack+0x18/0x68 [13431.927008] dump_stack+0xd0/0x12c [13431.930444] ___might_sleep+0xf0/0x130 [13431.934228] __might_sleep+0x54/0x90 [13431.937945] mutex_lock+0x28/0x80 [13431.941468] cscfg_csdev_disable_active_config+0x24/0x50 [13431.946952] etm4_disable+0xf0/0x100 [13431.950571] etm_event_stop+0xb8/0x130 [13431.954380] etm_event_del+0x14/0x20 [13431.958008] event_sched_out.isra.0+0x84/0x1c8 [13431.962496] group_sched_out.part.0+0x44/0xc8 [13431.967010] __perf_event_disable+0xe4/0x198 [13431.971549] event_function+0x8c/0xe8 [13431.975256] remote_function+0x64/0x78 [13431.979161] generic_exec_single+0xa0/0x100 [13431.983876] smp_call_function_single+0x158/0x1d8 [13431.988629] event_function_call+0x128/0x138 [13431.992942] _perf_event_disable+0x48/0x70 [13431.997082] perf_event_for_each_child+0x3c/0x90 [13432.001751] _perf_ioctl+0x198/0x4a8 [13432.005359] perf_ioctl+0x4c/0x78 [13432.008715] __arm64_sys_ioctl+0xa8/0xf0 [13432.012835] el0_svc_common.constprop.0+0x78/0x1a0 [13432.017767] do_el0_svc+0x24/0x90 [13432.021616] el0_sync_handler+0x160/0x168 [13432.025670] el0_sync+0x174/0x180
- config_csdev = (struct cscfg_config_csdev *)csdev->active_cscfg_ctxt;
- if (config_csdev) {
cscfg_csdev_disable_config(config_csdev);
csdev->active_cscfg_ctxt = NULL;
- }
- mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_disable_active_config);
- /* Initialise system configuration management device. */
struct device *cscfg_device(void) @@ -536,6 +707,7 @@ int __init cscfg_init(void) INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); INIT_LIST_HEAD(&cscfg_mgr->config_desc_list);
- atomic_set(&cscfg_mgr->sys_active_cnt, 0);
dev_info(cscfg_device(), "CoreSight Configuration manager initialised"); return 0; diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h index 5bcae3b374c6..a52775890670 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.h +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -24,12 +24,14 @@
- @csdev_desc_list: List of coresight devices registered with the configuration manager.
- @feat_desc_list: List of feature descriptors to load into registered devices.
- @config_desc_list: List of system configuration descriptors to load into registered devices.
*/ struct cscfg_manager { struct device dev; struct list_head csdev_desc_list; struct list_head feat_desc_list; struct list_head config_desc_list;
- @sys_active_cnt: Total number of active config descriptor references.
- atomic_t sys_active_cnt; };
/* get reference to dev in cscfg_manager */ @@ -61,5 +63,11 @@ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs, int cscfg_register_csdev(struct coresight_device *csdev, u32 match_flags, struct cscfg_csdev_feat_ops *ops); void cscfg_unregister_csdev(struct coresight_device *csdev); +int cscfg_activate_config(unsigned long cfg_hash); +void cscfg_deactivate_config(unsigned long cfg_hash); +void cscfg_csdev_reset_feats(struct coresight_device *csdev); +int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset);
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev); #endif /* CORESIGHT_SYSCFG_H */ diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 6fb516e1b22e..a348049ee08b 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -222,6 +222,7 @@ struct coresight_sysfs_link {
- @has_conns_grp: Have added a "connections" group for sysfs links.
- @feature_csdev_list: List of complex feature programming added to the device.
- @config_csdev_list: List of system configurations added to the device.
*/ struct coresight_device { struct coresight_platform_data *pdata;
- @active_cscfg_ctxt: Context information for current active system configuration.
@@ -246,6 +247,7 @@ struct coresight_device { /* system configuration and feature lists */ struct list_head feature_csdev_list; struct list_head config_csdev_list;
- void *active_cscfg_ctxt; };
/*
Hi Branislav,
On Thu, 10 Jun 2021 at 05:05, Branislav Rankov branislav.rankov@arm.com wrote:
On 4/14/21 8:18 PM, Mike Leach wrote:
Configurations are first activated, then when any coresight device is enabled, the active configurations are checked and any matching one is enabled.
This patch provides the activation / enable API.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org
.../hwtracing/coresight/coresight-config.h | 2 + .../hwtracing/coresight/coresight-syscfg.c | 172 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 8 + include/linux/coresight.h | 2 + 4 files changed, 184 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h index 0667581822c1..25eb6c632692 100644 --- a/drivers/hwtracing/coresight/coresight-config.h +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -127,6 +127,7 @@ struct cscfg_feature_desc {
- @nr_total_params: Sum of all parameters declared by used features
- @presets: Array of preset values.
- @event_ea: Extended attribute for perf event value
*/ struct cscfg_config_desc {
- @active_cnt: ref count for activate on this configuration.
@@ -139,6 +140,7 @@ struct cscfg_config_desc { int nr_total_params; const u64 *presets; /* nr_presets * nr_total_params */ struct dev_ext_attribute *event_ea;
atomic_t active_cnt;
};
/**
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index e35f8c0ac2f8..b234e45c153f 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -283,6 +283,7 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) return err;
list_add(&config_desc->item, &cscfg_mgr->config_desc_list);
}atomic_set(&config_desc->active_cnt, 0); return 0;
@@ -468,6 +469,176 @@ void cscfg_unregister_csdev(struct coresight_device *csdev) } EXPORT_SYMBOL_GPL(cscfg_unregister_csdev);
+/**
- cscfg_csdev_reset_feats - reset features for a CoreSight device.
- Resets all parameters and register values for any features loaded
- into @csdev to their default values.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_reset_feats(struct coresight_device *csdev) +{
struct cscfg_feature_csdev *feat_csdev;
mutex_lock(&cscfg_csdev_mutex);
if (list_empty(&csdev->feature_csdev_list))
goto unlock_exit;
list_for_each_entry(feat_csdev, &csdev->feature_csdev_list, node)
cscfg_reset_feat(feat_csdev);
+unlock_exit:
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_reset_feats);
+/**
- cscfg_activate_config - Mark a configuration descriptor as active.
- This will be seen when csdev devices are enabled in the system.
- Only activated configurations can be enabled on individual devices.
- Activation protects the configuration from alteration or removal while
- active.
- Selection by hash value - generated from the configuration name when it
- was loaded and added to the cs_etm/configurations file system for selection
- by perf.
- Increments the configuration descriptor active count and the global active
- count.
- @cfg_hash: Hash value of the selected configuration name.
- */
+int cscfg_activate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
int err = -EINVAL;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
/*
* increment the global active count - control changes to
* active configurations
*/
atomic_inc(&cscfg_mgr->sys_active_cnt);
/*
* mark the descriptor as active so enable config on a
* device instance will use it
*/
atomic_inc(&config_desc->active_cnt);
err = 0;
dev_dbg(cscfg_device(), "Activate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_activate_config);
+/**
- cscfg_deactivate_config - Mark a config descriptor as inactive.
- Decrement the configuration and global active counts.
- @cfg_hash: Hash value of the selected configuration name.
- */
+void cscfg_deactivate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
atomic_dec(&config_desc->active_cnt);
atomic_dec(&cscfg_mgr->sys_active_cnt);
dev_dbg(cscfg_device(), "Deactivate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_deactivate_config);
+/**
- cscfg_csdev_enable_active_config - Enable matching active configuration for device.
- Enables the configuration selected by @cfg_hash if the configuration is supported
- on the device and has been activated.
- If active and supported the CoreSight device @csdev will be programmed with the
- configuration, using @preset parameters.
- Should be called before driver hardware enable for the requested device, prior to
- programming and enabling the physical hardware.
- @csdev: CoreSight device to program.
- @cfg_hash: Selector for the configuration.
- @preset: Preset parameter values to use, 0 for current / default values.
- */
+int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset)
+{
struct cscfg_config_csdev *config_csdev_active = NULL, *config_csdev_item;
const struct cscfg_config_desc *config_desc;
int err = 0;
/* quickly check global count */
if (!atomic_read(&cscfg_mgr->sys_active_cnt))
return 0;
mutex_lock(&cscfg_csdev_mutex);
list_for_each_entry(config_csdev_item, &csdev->config_csdev_list, node) {
config_desc = config_csdev_item->config_desc;
if ((atomic_read(&config_desc->active_cnt)) &&
((unsigned long)config_desc->event_ea->var == cfg_hash)) {
config_csdev_active = config_csdev_item;
break;
}
}
if (config_csdev_active) {
err = cscfg_csdev_enable_config(config_csdev_active, preset);
if (!err)
csdev->active_cscfg_ctxt = (void *)config_csdev_active;
}
mutex_unlock(&cscfg_csdev_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_enable_active_config);
+/**
- cscfg_csdev_disable_active_config - disable an active config on the device.
- Disables the active configuration on the CoreSight device @csdev.
- Disable will save the values of any registers marked in the configurations
- as save on disable.
- Should be called after driver hardware disable for the requested device,
- after disabling the physical hardware and reading back registers.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev) +{
struct cscfg_config_csdev *config_csdev;
mutex_lock(&cscfg_csdev_mutex);
This line seems to cause a bug report when the kernel is compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y
I have tested this by applying the series to 5.10 kernel on Dragonboard 845c.
It only happens when strobing is used.
Thanks for reporting this. Unfortunately Mike is away and likely won't be able to look at this in time for the merge window. As such I backed out the complex configuration feature from the next branch but that code is still available on next-complex-configuration.
Thanks, Mathieu
The report is this:
[13431.885395] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 [13431.893919] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 3525, name: perf [13431.901882] CPU: 0 PID: 3525 Comm: perf Tainted: G W 5.10.0-rc5-17282-g923b456a55fb #124 [13431.911436] Hardware name: Thundercomm Dragonboard 845c (DT) [13431.917450] Call trace: [13431.919938] dump_backtrace+0x0/0x1a0 [13431.923644] show_stack+0x18/0x68 [13431.927008] dump_stack+0xd0/0x12c [13431.930444] ___might_sleep+0xf0/0x130 [13431.934228] __might_sleep+0x54/0x90 [13431.937945] mutex_lock+0x28/0x80 [13431.941468] cscfg_csdev_disable_active_config+0x24/0x50 [13431.946952] etm4_disable+0xf0/0x100 [13431.950571] etm_event_stop+0xb8/0x130 [13431.954380] etm_event_del+0x14/0x20 [13431.958008] event_sched_out.isra.0+0x84/0x1c8 [13431.962496] group_sched_out.part.0+0x44/0xc8 [13431.967010] __perf_event_disable+0xe4/0x198 [13431.971549] event_function+0x8c/0xe8 [13431.975256] remote_function+0x64/0x78 [13431.979161] generic_exec_single+0xa0/0x100 [13431.983876] smp_call_function_single+0x158/0x1d8 [13431.988629] event_function_call+0x128/0x138 [13431.992942] _perf_event_disable+0x48/0x70 [13431.997082] perf_event_for_each_child+0x3c/0x90 [13432.001751] _perf_ioctl+0x198/0x4a8 [13432.005359] perf_ioctl+0x4c/0x78 [13432.008715] __arm64_sys_ioctl+0xa8/0xf0 [13432.012835] el0_svc_common.constprop.0+0x78/0x1a0 [13432.017767] do_el0_svc+0x24/0x90 [13432.021616] el0_sync_handler+0x160/0x168 [13432.025670] el0_sync+0x174/0x180
config_csdev = (struct cscfg_config_csdev *)csdev->active_cscfg_ctxt;
if (config_csdev) {
cscfg_csdev_disable_config(config_csdev);
csdev->active_cscfg_ctxt = NULL;
}
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_disable_active_config);
/* Initialise system configuration management device. */
struct device *cscfg_device(void)
@@ -536,6 +707,7 @@ int __init cscfg_init(void) INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); INIT_LIST_HEAD(&cscfg_mgr->config_desc_list);
atomic_set(&cscfg_mgr->sys_active_cnt, 0); dev_info(cscfg_device(), "CoreSight Configuration manager initialised"); return 0;
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h index 5bcae3b374c6..a52775890670 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.h +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -24,12 +24,14 @@
- @csdev_desc_list: List of coresight devices registered with the configuration manager.
- @feat_desc_list: List of feature descriptors to load into registered devices.
- @config_desc_list: List of system configuration descriptors to load into registered devices.
- @sys_active_cnt: Total number of active config descriptor references.
*/ struct cscfg_manager { struct device dev; struct list_head csdev_desc_list; struct list_head feat_desc_list; struct list_head config_desc_list;
atomic_t sys_active_cnt;
};
/* get reference to dev in cscfg_manager */
@@ -61,5 +63,11 @@ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs, int cscfg_register_csdev(struct coresight_device *csdev, u32 match_flags, struct cscfg_csdev_feat_ops *ops); void cscfg_unregister_csdev(struct coresight_device *csdev); +int cscfg_activate_config(unsigned long cfg_hash); +void cscfg_deactivate_config(unsigned long cfg_hash); +void cscfg_csdev_reset_feats(struct coresight_device *csdev); +int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset);
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev);
#endif /* CORESIGHT_SYSCFG_H */ diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 6fb516e1b22e..a348049ee08b 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -222,6 +222,7 @@ struct coresight_sysfs_link {
- @has_conns_grp: Have added a "connections" group for sysfs links.
- @feature_csdev_list: List of complex feature programming added to the device.
- @config_csdev_list: List of system configurations added to the device.
*/ struct coresight_device { struct coresight_platform_data *pdata;
- @active_cscfg_ctxt: Context information for current active system configuration.
@@ -246,6 +247,7 @@ struct coresight_device { /* system configuration and feature lists */ struct list_head feature_csdev_list; struct list_head config_csdev_list;
void *active_cscfg_ctxt;
};
/*
HI Branislav, Mathieu,
I have started to look into this as a top priority.
However, when I enable the CONFIG_DEBUG_ option my board fails to boot at all. (Dragonboard DB410c), so the resolution make take a little time.
At this point I am assuming that the mutex will need to be replaced by a spinlock - so a re-design + v8 set may well be required.
Regards
Mike
On Mon, 14 Jun 2021 at 18:03, Mathieu Poirier mathieu.poirier@linaro.org wrote:
Hi Branislav,
On Thu, 10 Jun 2021 at 05:05, Branislav Rankov branislav.rankov@arm.com wrote:
On 4/14/21 8:18 PM, Mike Leach wrote:
Configurations are first activated, then when any coresight device is enabled, the active configurations are checked and any matching one is enabled.
This patch provides the activation / enable API.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org
.../hwtracing/coresight/coresight-config.h | 2 + .../hwtracing/coresight/coresight-syscfg.c | 172 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 8 + include/linux/coresight.h | 2 + 4 files changed, 184 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h index 0667581822c1..25eb6c632692 100644 --- a/drivers/hwtracing/coresight/coresight-config.h +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -127,6 +127,7 @@ struct cscfg_feature_desc {
- @nr_total_params: Sum of all parameters declared by used features
- @presets: Array of preset values.
- @event_ea: Extended attribute for perf event value
*/ struct cscfg_config_desc {
- @active_cnt: ref count for activate on this configuration.
@@ -139,6 +140,7 @@ struct cscfg_config_desc { int nr_total_params; const u64 *presets; /* nr_presets * nr_total_params */ struct dev_ext_attribute *event_ea;
atomic_t active_cnt;
};
/**
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index e35f8c0ac2f8..b234e45c153f 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -283,6 +283,7 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) return err;
list_add(&config_desc->item, &cscfg_mgr->config_desc_list);
}atomic_set(&config_desc->active_cnt, 0); return 0;
@@ -468,6 +469,176 @@ void cscfg_unregister_csdev(struct coresight_device *csdev) } EXPORT_SYMBOL_GPL(cscfg_unregister_csdev);
+/**
- cscfg_csdev_reset_feats - reset features for a CoreSight device.
- Resets all parameters and register values for any features loaded
- into @csdev to their default values.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_reset_feats(struct coresight_device *csdev) +{
struct cscfg_feature_csdev *feat_csdev;
mutex_lock(&cscfg_csdev_mutex);
if (list_empty(&csdev->feature_csdev_list))
goto unlock_exit;
list_for_each_entry(feat_csdev, &csdev->feature_csdev_list, node)
cscfg_reset_feat(feat_csdev);
+unlock_exit:
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_reset_feats);
+/**
- cscfg_activate_config - Mark a configuration descriptor as active.
- This will be seen when csdev devices are enabled in the system.
- Only activated configurations can be enabled on individual devices.
- Activation protects the configuration from alteration or removal while
- active.
- Selection by hash value - generated from the configuration name when it
- was loaded and added to the cs_etm/configurations file system for selection
- by perf.
- Increments the configuration descriptor active count and the global active
- count.
- @cfg_hash: Hash value of the selected configuration name.
- */
+int cscfg_activate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
int err = -EINVAL;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
/*
* increment the global active count - control changes to
* active configurations
*/
atomic_inc(&cscfg_mgr->sys_active_cnt);
/*
* mark the descriptor as active so enable config on a
* device instance will use it
*/
atomic_inc(&config_desc->active_cnt);
err = 0;
dev_dbg(cscfg_device(), "Activate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_activate_config);
+/**
- cscfg_deactivate_config - Mark a config descriptor as inactive.
- Decrement the configuration and global active counts.
- @cfg_hash: Hash value of the selected configuration name.
- */
+void cscfg_deactivate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
atomic_dec(&config_desc->active_cnt);
atomic_dec(&cscfg_mgr->sys_active_cnt);
dev_dbg(cscfg_device(), "Deactivate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_deactivate_config);
+/**
- cscfg_csdev_enable_active_config - Enable matching active configuration for device.
- Enables the configuration selected by @cfg_hash if the configuration is supported
- on the device and has been activated.
- If active and supported the CoreSight device @csdev will be programmed with the
- configuration, using @preset parameters.
- Should be called before driver hardware enable for the requested device, prior to
- programming and enabling the physical hardware.
- @csdev: CoreSight device to program.
- @cfg_hash: Selector for the configuration.
- @preset: Preset parameter values to use, 0 for current / default values.
- */
+int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset)
+{
struct cscfg_config_csdev *config_csdev_active = NULL, *config_csdev_item;
const struct cscfg_config_desc *config_desc;
int err = 0;
/* quickly check global count */
if (!atomic_read(&cscfg_mgr->sys_active_cnt))
return 0;
mutex_lock(&cscfg_csdev_mutex);
list_for_each_entry(config_csdev_item, &csdev->config_csdev_list, node) {
config_desc = config_csdev_item->config_desc;
if ((atomic_read(&config_desc->active_cnt)) &&
((unsigned long)config_desc->event_ea->var == cfg_hash)) {
config_csdev_active = config_csdev_item;
break;
}
}
if (config_csdev_active) {
err = cscfg_csdev_enable_config(config_csdev_active, preset);
if (!err)
csdev->active_cscfg_ctxt = (void *)config_csdev_active;
}
mutex_unlock(&cscfg_csdev_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_enable_active_config);
+/**
- cscfg_csdev_disable_active_config - disable an active config on the device.
- Disables the active configuration on the CoreSight device @csdev.
- Disable will save the values of any registers marked in the configurations
- as save on disable.
- Should be called after driver hardware disable for the requested device,
- after disabling the physical hardware and reading back registers.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev) +{
struct cscfg_config_csdev *config_csdev;
mutex_lock(&cscfg_csdev_mutex);
This line seems to cause a bug report when the kernel is compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y
I have tested this by applying the series to 5.10 kernel on Dragonboard 845c.
It only happens when strobing is used.
Thanks for reporting this. Unfortunately Mike is away and likely won't be able to look at this in time for the merge window. As such I backed out the complex configuration feature from the next branch but that code is still available on next-complex-configuration.
Thanks, Mathieu
The report is this:
[13431.885395] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 [13431.893919] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 3525, name: perf [13431.901882] CPU: 0 PID: 3525 Comm: perf Tainted: G W 5.10.0-rc5-17282-g923b456a55fb #124 [13431.911436] Hardware name: Thundercomm Dragonboard 845c (DT) [13431.917450] Call trace: [13431.919938] dump_backtrace+0x0/0x1a0 [13431.923644] show_stack+0x18/0x68 [13431.927008] dump_stack+0xd0/0x12c [13431.930444] ___might_sleep+0xf0/0x130 [13431.934228] __might_sleep+0x54/0x90 [13431.937945] mutex_lock+0x28/0x80 [13431.941468] cscfg_csdev_disable_active_config+0x24/0x50 [13431.946952] etm4_disable+0xf0/0x100 [13431.950571] etm_event_stop+0xb8/0x130 [13431.954380] etm_event_del+0x14/0x20 [13431.958008] event_sched_out.isra.0+0x84/0x1c8 [13431.962496] group_sched_out.part.0+0x44/0xc8 [13431.967010] __perf_event_disable+0xe4/0x198 [13431.971549] event_function+0x8c/0xe8 [13431.975256] remote_function+0x64/0x78 [13431.979161] generic_exec_single+0xa0/0x100 [13431.983876] smp_call_function_single+0x158/0x1d8 [13431.988629] event_function_call+0x128/0x138 [13431.992942] _perf_event_disable+0x48/0x70 [13431.997082] perf_event_for_each_child+0x3c/0x90 [13432.001751] _perf_ioctl+0x198/0x4a8 [13432.005359] perf_ioctl+0x4c/0x78 [13432.008715] __arm64_sys_ioctl+0xa8/0xf0 [13432.012835] el0_svc_common.constprop.0+0x78/0x1a0 [13432.017767] do_el0_svc+0x24/0x90 [13432.021616] el0_sync_handler+0x160/0x168 [13432.025670] el0_sync+0x174/0x180
config_csdev = (struct cscfg_config_csdev *)csdev->active_cscfg_ctxt;
if (config_csdev) {
cscfg_csdev_disable_config(config_csdev);
csdev->active_cscfg_ctxt = NULL;
}
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_disable_active_config);
/* Initialise system configuration management device. */
struct device *cscfg_device(void)
@@ -536,6 +707,7 @@ int __init cscfg_init(void) INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); INIT_LIST_HEAD(&cscfg_mgr->config_desc_list);
atomic_set(&cscfg_mgr->sys_active_cnt, 0); dev_info(cscfg_device(), "CoreSight Configuration manager initialised"); return 0;
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h index 5bcae3b374c6..a52775890670 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.h +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -24,12 +24,14 @@
- @csdev_desc_list: List of coresight devices registered with the configuration manager.
- @feat_desc_list: List of feature descriptors to load into registered devices.
- @config_desc_list: List of system configuration descriptors to load into registered devices.
- @sys_active_cnt: Total number of active config descriptor references.
*/ struct cscfg_manager { struct device dev; struct list_head csdev_desc_list; struct list_head feat_desc_list; struct list_head config_desc_list;
atomic_t sys_active_cnt;
};
/* get reference to dev in cscfg_manager */
@@ -61,5 +63,11 @@ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs, int cscfg_register_csdev(struct coresight_device *csdev, u32 match_flags, struct cscfg_csdev_feat_ops *ops); void cscfg_unregister_csdev(struct coresight_device *csdev); +int cscfg_activate_config(unsigned long cfg_hash); +void cscfg_deactivate_config(unsigned long cfg_hash); +void cscfg_csdev_reset_feats(struct coresight_device *csdev); +int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset);
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev);
#endif /* CORESIGHT_SYSCFG_H */ diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 6fb516e1b22e..a348049ee08b 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -222,6 +222,7 @@ struct coresight_sysfs_link {
- @has_conns_grp: Have added a "connections" group for sysfs links.
- @feature_csdev_list: List of complex feature programming added to the device.
- @config_csdev_list: List of system configurations added to the device.
*/ struct coresight_device { struct coresight_platform_data *pdata;
- @active_cscfg_ctxt: Context information for current active system configuration.
@@ -246,6 +247,7 @@ struct coresight_device { /* system configuration and feature lists */ struct list_head feature_csdev_list; struct list_head config_csdev_list;
void *active_cscfg_ctxt;
};
/*
On 25/06/2021 15:37, Mike Leach wrote:
HI Branislav, Mathieu,
I have started to look into this as a top priority.
However, when I enable the CONFIG_DEBUG_ option my board fails to boot at all. (Dragonboard DB410c), so the resolution make take a little time.
At this point I am assuming that the mutex will need to be replaced by a spinlock - so a re-design + v8 set may well be required.
Or may be a refcount on the "config" instance may work too ? i.e, when the config is loaded onto a device, a refcount could be taken on the config and dropped on unload.
Whoever drops it to zero could release it.
Thoughts ?
Suzuki
Regards
Mike
On Mon, 14 Jun 2021 at 18:03, Mathieu Poirier mathieu.poirier@linaro.org wrote:
Hi Branislav,
On Thu, 10 Jun 2021 at 05:05, Branislav Rankov branislav.rankov@arm.com wrote:
On 4/14/21 8:18 PM, Mike Leach wrote:
Configurations are first activated, then when any coresight device is enabled, the active configurations are checked and any matching one is enabled.
This patch provides the activation / enable API.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org
.../hwtracing/coresight/coresight-config.h | 2 + .../hwtracing/coresight/coresight-syscfg.c | 172 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 8 + include/linux/coresight.h | 2 + 4 files changed, 184 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h index 0667581822c1..25eb6c632692 100644 --- a/drivers/hwtracing/coresight/coresight-config.h +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -127,6 +127,7 @@ struct cscfg_feature_desc { * @nr_total_params: Sum of all parameters declared by used features * @presets: Array of preset values. * @event_ea: Extended attribute for perf event value
struct cscfg_config_desc {
- @active_cnt: ref count for activate on this configuration.
*/
@@ -139,6 +140,7 @@ struct cscfg_config_desc { int nr_total_params; const u64 *presets; /* nr_presets * nr_total_params */ struct dev_ext_attribute *event_ea;
atomic_t active_cnt;
};
/**
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index e35f8c0ac2f8..b234e45c153f 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -283,6 +283,7 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) return err;
list_add(&config_desc->item, &cscfg_mgr->config_desc_list);
}atomic_set(&config_desc->active_cnt, 0); return 0;
@@ -468,6 +469,176 @@ void cscfg_unregister_csdev(struct coresight_device *csdev) } EXPORT_SYMBOL_GPL(cscfg_unregister_csdev);
+/**
- cscfg_csdev_reset_feats - reset features for a CoreSight device.
- Resets all parameters and register values for any features loaded
- into @csdev to their default values.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_reset_feats(struct coresight_device *csdev) +{
struct cscfg_feature_csdev *feat_csdev;
mutex_lock(&cscfg_csdev_mutex);
if (list_empty(&csdev->feature_csdev_list))
goto unlock_exit;
list_for_each_entry(feat_csdev, &csdev->feature_csdev_list, node)
cscfg_reset_feat(feat_csdev);
+unlock_exit:
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_reset_feats);
+/**
- cscfg_activate_config - Mark a configuration descriptor as active.
- This will be seen when csdev devices are enabled in the system.
- Only activated configurations can be enabled on individual devices.
- Activation protects the configuration from alteration or removal while
- active.
- Selection by hash value - generated from the configuration name when it
- was loaded and added to the cs_etm/configurations file system for selection
- by perf.
- Increments the configuration descriptor active count and the global active
- count.
- @cfg_hash: Hash value of the selected configuration name.
- */
+int cscfg_activate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
int err = -EINVAL;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
/*
* increment the global active count - control changes to
* active configurations
*/
atomic_inc(&cscfg_mgr->sys_active_cnt);
/*
* mark the descriptor as active so enable config on a
* device instance will use it
*/
atomic_inc(&config_desc->active_cnt);
err = 0;
dev_dbg(cscfg_device(), "Activate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_activate_config);
+/**
- cscfg_deactivate_config - Mark a config descriptor as inactive.
- Decrement the configuration and global active counts.
- @cfg_hash: Hash value of the selected configuration name.
- */
+void cscfg_deactivate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
atomic_dec(&config_desc->active_cnt);
atomic_dec(&cscfg_mgr->sys_active_cnt);
dev_dbg(cscfg_device(), "Deactivate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_deactivate_config);
+/**
- cscfg_csdev_enable_active_config - Enable matching active configuration for device.
- Enables the configuration selected by @cfg_hash if the configuration is supported
- on the device and has been activated.
- If active and supported the CoreSight device @csdev will be programmed with the
- configuration, using @preset parameters.
- Should be called before driver hardware enable for the requested device, prior to
- programming and enabling the physical hardware.
- @csdev: CoreSight device to program.
- @cfg_hash: Selector for the configuration.
- @preset: Preset parameter values to use, 0 for current / default values.
- */
+int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset)
+{
struct cscfg_config_csdev *config_csdev_active = NULL, *config_csdev_item;
const struct cscfg_config_desc *config_desc;
int err = 0;
/* quickly check global count */
if (!atomic_read(&cscfg_mgr->sys_active_cnt))
return 0;
mutex_lock(&cscfg_csdev_mutex);
list_for_each_entry(config_csdev_item, &csdev->config_csdev_list, node) {
config_desc = config_csdev_item->config_desc;
if ((atomic_read(&config_desc->active_cnt)) &&
((unsigned long)config_desc->event_ea->var == cfg_hash)) {
config_csdev_active = config_csdev_item;
break;
}
}
if (config_csdev_active) {
err = cscfg_csdev_enable_config(config_csdev_active, preset);
if (!err)
csdev->active_cscfg_ctxt = (void *)config_csdev_active;
}
mutex_unlock(&cscfg_csdev_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_enable_active_config);
+/**
- cscfg_csdev_disable_active_config - disable an active config on the device.
- Disables the active configuration on the CoreSight device @csdev.
- Disable will save the values of any registers marked in the configurations
- as save on disable.
- Should be called after driver hardware disable for the requested device,
- after disabling the physical hardware and reading back registers.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev) +{
struct cscfg_config_csdev *config_csdev;
mutex_lock(&cscfg_csdev_mutex);
This line seems to cause a bug report when the kernel is compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y
I have tested this by applying the series to 5.10 kernel on Dragonboard 845c.
It only happens when strobing is used.
Thanks for reporting this. Unfortunately Mike is away and likely won't be able to look at this in time for the merge window. As such I backed out the complex configuration feature from the next branch but that code is still available on next-complex-configuration.
Thanks, Mathieu
The report is this:
[13431.885395] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 [13431.893919] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 3525, name: perf [13431.901882] CPU: 0 PID: 3525 Comm: perf Tainted: G W 5.10.0-rc5-17282-g923b456a55fb #124 [13431.911436] Hardware name: Thundercomm Dragonboard 845c (DT) [13431.917450] Call trace: [13431.919938] dump_backtrace+0x0/0x1a0 [13431.923644] show_stack+0x18/0x68 [13431.927008] dump_stack+0xd0/0x12c [13431.930444] ___might_sleep+0xf0/0x130 [13431.934228] __might_sleep+0x54/0x90 [13431.937945] mutex_lock+0x28/0x80 [13431.941468] cscfg_csdev_disable_active_config+0x24/0x50 [13431.946952] etm4_disable+0xf0/0x100 [13431.950571] etm_event_stop+0xb8/0x130 [13431.954380] etm_event_del+0x14/0x20 [13431.958008] event_sched_out.isra.0+0x84/0x1c8 [13431.962496] group_sched_out.part.0+0x44/0xc8 [13431.967010] __perf_event_disable+0xe4/0x198 [13431.971549] event_function+0x8c/0xe8 [13431.975256] remote_function+0x64/0x78 [13431.979161] generic_exec_single+0xa0/0x100 [13431.983876] smp_call_function_single+0x158/0x1d8 [13431.988629] event_function_call+0x128/0x138 [13431.992942] _perf_event_disable+0x48/0x70 [13431.997082] perf_event_for_each_child+0x3c/0x90 [13432.001751] _perf_ioctl+0x198/0x4a8 [13432.005359] perf_ioctl+0x4c/0x78 [13432.008715] __arm64_sys_ioctl+0xa8/0xf0 [13432.012835] el0_svc_common.constprop.0+0x78/0x1a0 [13432.017767] do_el0_svc+0x24/0x90 [13432.021616] el0_sync_handler+0x160/0x168 [13432.025670] el0_sync+0x174/0x180
config_csdev = (struct cscfg_config_csdev *)csdev->active_cscfg_ctxt;
if (config_csdev) {
cscfg_csdev_disable_config(config_csdev);
csdev->active_cscfg_ctxt = NULL;
}
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_disable_active_config);
/* Initialise system configuration management device. */
struct device *cscfg_device(void)
@@ -536,6 +707,7 @@ int __init cscfg_init(void) INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); INIT_LIST_HEAD(&cscfg_mgr->config_desc_list);
atomic_set(&cscfg_mgr->sys_active_cnt, 0); dev_info(cscfg_device(), "CoreSight Configuration manager initialised"); return 0;
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h index 5bcae3b374c6..a52775890670 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.h +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -24,12 +24,14 @@ * @csdev_desc_list: List of coresight devices registered with the configuration manager. * @feat_desc_list: List of feature descriptors to load into registered devices. * @config_desc_list: List of system configuration descriptors to load into registered devices.
- @sys_active_cnt: Total number of active config descriptor references. */
struct cscfg_manager { struct device dev; struct list_head csdev_desc_list; struct list_head feat_desc_list; struct list_head config_desc_list;
atomic_t sys_active_cnt;
};
/* get reference to dev in cscfg_manager */
@@ -61,5 +63,11 @@ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs, int cscfg_register_csdev(struct coresight_device *csdev, u32 match_flags, struct cscfg_csdev_feat_ops *ops); void cscfg_unregister_csdev(struct coresight_device *csdev); +int cscfg_activate_config(unsigned long cfg_hash); +void cscfg_deactivate_config(unsigned long cfg_hash); +void cscfg_csdev_reset_feats(struct coresight_device *csdev); +int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset);
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev);
#endif /* CORESIGHT_SYSCFG_H */ diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 6fb516e1b22e..a348049ee08b 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -222,6 +222,7 @@ struct coresight_sysfs_link { * @has_conns_grp: Have added a "connections" group for sysfs links. * @feature_csdev_list: List of complex feature programming added to the device. * @config_csdev_list: List of system configurations added to the device.
struct coresight_device { struct coresight_platform_data *pdata;
- @active_cscfg_ctxt: Context information for current active system configuration. */
@@ -246,6 +247,7 @@ struct coresight_device { /* system configuration and feature lists */ struct list_head feature_csdev_list; struct list_head config_csdev_list;
void *active_cscfg_ctxt;
};
/*
HI Suzuki,
On Fri, 25 Jun 2021 at 16:09, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 25/06/2021 15:37, Mike Leach wrote:
HI Branislav, Mathieu,
I have started to look into this as a top priority.
However, when I enable the CONFIG_DEBUG_ option my board fails to boot at all. (Dragonboard DB410c), so the resolution make take a little time.
At this point I am assuming that the mutex will need to be replaced by a spinlock - so a re-design + v8 set may well be required.
Or may be a refcount on the "config" instance may work too ? i.e, when the config is loaded onto a device, a refcount could be taken on the config and dropped on unload.
Whoever drops it to zero could release it.
Config activate / deactivate is protected by a refcount - and when dynamic loading we prevent unload if active.
The issue here is dertermining which config instance on the device to program up when enabling the device. perf will activate the config when it goes through setup_aux (at the same time as all the coresight paths / sinks are activated). the coresight device (ETM /ETE) will enable the config on a specific ETM instance when that ETM is enabled for the perf event. To do this it checks the event data to determine which config is active for the event and then calls this API to enable it. conversely when the perf event causes a disable ETM - then the config will be disabled - which may mean saving some registers. perf will deactivate the config in the free_event_data, once the perf session disappears.
So, as the event is scheduled on and off etms, the config is programmed or deprogrammed on the etm - so it is not really a case of ref counting, as it is either on or off. This allows for the event moving when --per-thread - only devices in use by perf are programmed with the config - and also ensures that this scales to support multiple perf sessions with differing configs (when we support multiple perf sessions).
The requirement here is to protect the list of loaded configs in the instance while we determine which one matches the active config for the perf session.
Moving from a cscfg global mutex, to a per csdev instance list splnlock makes sense in this context.
Regards
Mike
Thoughts ?
Suzuki
Regards
Mike
On Mon, 14 Jun 2021 at 18:03, Mathieu Poirier mathieu.poirier@linaro.org wrote:
Hi Branislav,
On Thu, 10 Jun 2021 at 05:05, Branislav Rankov branislav.rankov@arm.com wrote:
On 4/14/21 8:18 PM, Mike Leach wrote:
Configurations are first activated, then when any coresight device is enabled, the active configurations are checked and any matching one is enabled.
This patch provides the activation / enable API.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org
.../hwtracing/coresight/coresight-config.h | 2 + .../hwtracing/coresight/coresight-syscfg.c | 172 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 8 + include/linux/coresight.h | 2 + 4 files changed, 184 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h index 0667581822c1..25eb6c632692 100644 --- a/drivers/hwtracing/coresight/coresight-config.h +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -127,6 +127,7 @@ struct cscfg_feature_desc { * @nr_total_params: Sum of all parameters declared by used features * @presets: Array of preset values. * @event_ea: Extended attribute for perf event value
struct cscfg_config_desc {
- @active_cnt: ref count for activate on this configuration.
*/
@@ -139,6 +140,7 @@ struct cscfg_config_desc { int nr_total_params; const u64 *presets; /* nr_presets * nr_total_params */ struct dev_ext_attribute *event_ea;
atomic_t active_cnt;
};
/**
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index e35f8c0ac2f8..b234e45c153f 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -283,6 +283,7 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) return err;
list_add(&config_desc->item, &cscfg_mgr->config_desc_list);
}atomic_set(&config_desc->active_cnt, 0); return 0;
@@ -468,6 +469,176 @@ void cscfg_unregister_csdev(struct coresight_device *csdev) } EXPORT_SYMBOL_GPL(cscfg_unregister_csdev);
+/**
- cscfg_csdev_reset_feats - reset features for a CoreSight device.
- Resets all parameters and register values for any features loaded
- into @csdev to their default values.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_reset_feats(struct coresight_device *csdev) +{
struct cscfg_feature_csdev *feat_csdev;
mutex_lock(&cscfg_csdev_mutex);
if (list_empty(&csdev->feature_csdev_list))
goto unlock_exit;
list_for_each_entry(feat_csdev, &csdev->feature_csdev_list, node)
cscfg_reset_feat(feat_csdev);
+unlock_exit:
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_reset_feats);
+/**
- cscfg_activate_config - Mark a configuration descriptor as active.
- This will be seen when csdev devices are enabled in the system.
- Only activated configurations can be enabled on individual devices.
- Activation protects the configuration from alteration or removal while
- active.
- Selection by hash value - generated from the configuration name when it
- was loaded and added to the cs_etm/configurations file system for selection
- by perf.
- Increments the configuration descriptor active count and the global active
- count.
- @cfg_hash: Hash value of the selected configuration name.
- */
+int cscfg_activate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
int err = -EINVAL;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
/*
* increment the global active count - control changes to
* active configurations
*/
atomic_inc(&cscfg_mgr->sys_active_cnt);
/*
* mark the descriptor as active so enable config on a
* device instance will use it
*/
atomic_inc(&config_desc->active_cnt);
err = 0;
dev_dbg(cscfg_device(), "Activate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_activate_config);
+/**
- cscfg_deactivate_config - Mark a config descriptor as inactive.
- Decrement the configuration and global active counts.
- @cfg_hash: Hash value of the selected configuration name.
- */
+void cscfg_deactivate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
atomic_dec(&config_desc->active_cnt);
atomic_dec(&cscfg_mgr->sys_active_cnt);
dev_dbg(cscfg_device(), "Deactivate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_deactivate_config);
+/**
- cscfg_csdev_enable_active_config - Enable matching active configuration for device.
- Enables the configuration selected by @cfg_hash if the configuration is supported
- on the device and has been activated.
- If active and supported the CoreSight device @csdev will be programmed with the
- configuration, using @preset parameters.
- Should be called before driver hardware enable for the requested device, prior to
- programming and enabling the physical hardware.
- @csdev: CoreSight device to program.
- @cfg_hash: Selector for the configuration.
- @preset: Preset parameter values to use, 0 for current / default values.
- */
+int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset)
+{
struct cscfg_config_csdev *config_csdev_active = NULL, *config_csdev_item;
const struct cscfg_config_desc *config_desc;
int err = 0;
/* quickly check global count */
if (!atomic_read(&cscfg_mgr->sys_active_cnt))
return 0;
mutex_lock(&cscfg_csdev_mutex);
list_for_each_entry(config_csdev_item, &csdev->config_csdev_list, node) {
config_desc = config_csdev_item->config_desc;
if ((atomic_read(&config_desc->active_cnt)) &&
((unsigned long)config_desc->event_ea->var == cfg_hash)) {
config_csdev_active = config_csdev_item;
break;
}
}
if (config_csdev_active) {
err = cscfg_csdev_enable_config(config_csdev_active, preset);
if (!err)
csdev->active_cscfg_ctxt = (void *)config_csdev_active;
}
mutex_unlock(&cscfg_csdev_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_enable_active_config);
+/**
- cscfg_csdev_disable_active_config - disable an active config on the device.
- Disables the active configuration on the CoreSight device @csdev.
- Disable will save the values of any registers marked in the configurations
- as save on disable.
- Should be called after driver hardware disable for the requested device,
- after disabling the physical hardware and reading back registers.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev) +{
struct cscfg_config_csdev *config_csdev;
mutex_lock(&cscfg_csdev_mutex);
This line seems to cause a bug report when the kernel is compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y
I have tested this by applying the series to 5.10 kernel on Dragonboard 845c.
It only happens when strobing is used.
Thanks for reporting this. Unfortunately Mike is away and likely won't be able to look at this in time for the merge window. As such I backed out the complex configuration feature from the next branch but that code is still available on next-complex-configuration.
Thanks, Mathieu
The report is this:
[13431.885395] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 [13431.893919] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 3525, name: perf [13431.901882] CPU: 0 PID: 3525 Comm: perf Tainted: G W 5.10.0-rc5-17282-g923b456a55fb #124 [13431.911436] Hardware name: Thundercomm Dragonboard 845c (DT) [13431.917450] Call trace: [13431.919938] dump_backtrace+0x0/0x1a0 [13431.923644] show_stack+0x18/0x68 [13431.927008] dump_stack+0xd0/0x12c [13431.930444] ___might_sleep+0xf0/0x130 [13431.934228] __might_sleep+0x54/0x90 [13431.937945] mutex_lock+0x28/0x80 [13431.941468] cscfg_csdev_disable_active_config+0x24/0x50 [13431.946952] etm4_disable+0xf0/0x100 [13431.950571] etm_event_stop+0xb8/0x130 [13431.954380] etm_event_del+0x14/0x20 [13431.958008] event_sched_out.isra.0+0x84/0x1c8 [13431.962496] group_sched_out.part.0+0x44/0xc8 [13431.967010] __perf_event_disable+0xe4/0x198 [13431.971549] event_function+0x8c/0xe8 [13431.975256] remote_function+0x64/0x78 [13431.979161] generic_exec_single+0xa0/0x100 [13431.983876] smp_call_function_single+0x158/0x1d8 [13431.988629] event_function_call+0x128/0x138 [13431.992942] _perf_event_disable+0x48/0x70 [13431.997082] perf_event_for_each_child+0x3c/0x90 [13432.001751] _perf_ioctl+0x198/0x4a8 [13432.005359] perf_ioctl+0x4c/0x78 [13432.008715] __arm64_sys_ioctl+0xa8/0xf0 [13432.012835] el0_svc_common.constprop.0+0x78/0x1a0 [13432.017767] do_el0_svc+0x24/0x90 [13432.021616] el0_sync_handler+0x160/0x168 [13432.025670] el0_sync+0x174/0x180
config_csdev = (struct cscfg_config_csdev *)csdev->active_cscfg_ctxt;
if (config_csdev) {
cscfg_csdev_disable_config(config_csdev);
csdev->active_cscfg_ctxt = NULL;
}
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_disable_active_config);
/* Initialise system configuration management device. */
struct device *cscfg_device(void)
@@ -536,6 +707,7 @@ int __init cscfg_init(void) INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); INIT_LIST_HEAD(&cscfg_mgr->config_desc_list);
atomic_set(&cscfg_mgr->sys_active_cnt, 0); dev_info(cscfg_device(), "CoreSight Configuration manager initialised"); return 0;
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h index 5bcae3b374c6..a52775890670 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.h +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -24,12 +24,14 @@ * @csdev_desc_list: List of coresight devices registered with the configuration manager. * @feat_desc_list: List of feature descriptors to load into registered devices. * @config_desc_list: List of system configuration descriptors to load into registered devices.
- @sys_active_cnt: Total number of active config descriptor references. */
struct cscfg_manager { struct device dev; struct list_head csdev_desc_list; struct list_head feat_desc_list; struct list_head config_desc_list;
atomic_t sys_active_cnt;
};
/* get reference to dev in cscfg_manager */
@@ -61,5 +63,11 @@ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs, int cscfg_register_csdev(struct coresight_device *csdev, u32 match_flags, struct cscfg_csdev_feat_ops *ops); void cscfg_unregister_csdev(struct coresight_device *csdev); +int cscfg_activate_config(unsigned long cfg_hash); +void cscfg_deactivate_config(unsigned long cfg_hash); +void cscfg_csdev_reset_feats(struct coresight_device *csdev); +int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset);
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev);
#endif /* CORESIGHT_SYSCFG_H */ diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 6fb516e1b22e..a348049ee08b 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -222,6 +222,7 @@ struct coresight_sysfs_link { * @has_conns_grp: Have added a "connections" group for sysfs links. * @feature_csdev_list: List of complex feature programming added to the device. * @config_csdev_list: List of system configurations added to the device.
struct coresight_device { struct coresight_platform_data *pdata;
- @active_cscfg_ctxt: Context information for current active system configuration. */
@@ -246,6 +247,7 @@ struct coresight_device { /* system configuration and feature lists */ struct list_head feature_csdev_list; struct list_head config_csdev_list;
void *active_cscfg_ctxt;
};
/*
-- Mike Leach Principal Engineer, ARM Ltd. Manchester Design Centre. UK
On Fri, Jun 25, 2021 at 03:37:16PM +0100, Mike Leach wrote:
HI Branislav, Mathieu,
I have started to look into this as a top priority.
Perfect.
There was also a report from a build bot realted to an undefined reference to config_group_init_type_name(). Please see if there is something to do on that one as well - I haven't had the opportunity to look at the report.
Thanks, Mathieu
However, when I enable the CONFIG_DEBUG_ option my board fails to boot at all. (Dragonboard DB410c), so the resolution make take a little time.
At this point I am assuming that the mutex will need to be replaced by a spinlock - so a re-design + v8 set may well be required.
Regards
Mike
On Mon, 14 Jun 2021 at 18:03, Mathieu Poirier mathieu.poirier@linaro.org wrote:
Hi Branislav,
On Thu, 10 Jun 2021 at 05:05, Branislav Rankov branislav.rankov@arm.com wrote:
On 4/14/21 8:18 PM, Mike Leach wrote:
Configurations are first activated, then when any coresight device is enabled, the active configurations are checked and any matching one is enabled.
This patch provides the activation / enable API.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org
.../hwtracing/coresight/coresight-config.h | 2 + .../hwtracing/coresight/coresight-syscfg.c | 172 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 8 + include/linux/coresight.h | 2 + 4 files changed, 184 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h index 0667581822c1..25eb6c632692 100644 --- a/drivers/hwtracing/coresight/coresight-config.h +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -127,6 +127,7 @@ struct cscfg_feature_desc {
- @nr_total_params: Sum of all parameters declared by used features
- @presets: Array of preset values.
- @event_ea: Extended attribute for perf event value
*/ struct cscfg_config_desc {
- @active_cnt: ref count for activate on this configuration.
@@ -139,6 +140,7 @@ struct cscfg_config_desc { int nr_total_params; const u64 *presets; /* nr_presets * nr_total_params */ struct dev_ext_attribute *event_ea;
atomic_t active_cnt;
};
/**
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index e35f8c0ac2f8..b234e45c153f 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -283,6 +283,7 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) return err;
list_add(&config_desc->item, &cscfg_mgr->config_desc_list);
}atomic_set(&config_desc->active_cnt, 0); return 0;
@@ -468,6 +469,176 @@ void cscfg_unregister_csdev(struct coresight_device *csdev) } EXPORT_SYMBOL_GPL(cscfg_unregister_csdev);
+/**
- cscfg_csdev_reset_feats - reset features for a CoreSight device.
- Resets all parameters and register values for any features loaded
- into @csdev to their default values.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_reset_feats(struct coresight_device *csdev) +{
struct cscfg_feature_csdev *feat_csdev;
mutex_lock(&cscfg_csdev_mutex);
if (list_empty(&csdev->feature_csdev_list))
goto unlock_exit;
list_for_each_entry(feat_csdev, &csdev->feature_csdev_list, node)
cscfg_reset_feat(feat_csdev);
+unlock_exit:
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_reset_feats);
+/**
- cscfg_activate_config - Mark a configuration descriptor as active.
- This will be seen when csdev devices are enabled in the system.
- Only activated configurations can be enabled on individual devices.
- Activation protects the configuration from alteration or removal while
- active.
- Selection by hash value - generated from the configuration name when it
- was loaded and added to the cs_etm/configurations file system for selection
- by perf.
- Increments the configuration descriptor active count and the global active
- count.
- @cfg_hash: Hash value of the selected configuration name.
- */
+int cscfg_activate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
int err = -EINVAL;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
/*
* increment the global active count - control changes to
* active configurations
*/
atomic_inc(&cscfg_mgr->sys_active_cnt);
/*
* mark the descriptor as active so enable config on a
* device instance will use it
*/
atomic_inc(&config_desc->active_cnt);
err = 0;
dev_dbg(cscfg_device(), "Activate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_activate_config);
+/**
- cscfg_deactivate_config - Mark a config descriptor as inactive.
- Decrement the configuration and global active counts.
- @cfg_hash: Hash value of the selected configuration name.
- */
+void cscfg_deactivate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
atomic_dec(&config_desc->active_cnt);
atomic_dec(&cscfg_mgr->sys_active_cnt);
dev_dbg(cscfg_device(), "Deactivate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_deactivate_config);
+/**
- cscfg_csdev_enable_active_config - Enable matching active configuration for device.
- Enables the configuration selected by @cfg_hash if the configuration is supported
- on the device and has been activated.
- If active and supported the CoreSight device @csdev will be programmed with the
- configuration, using @preset parameters.
- Should be called before driver hardware enable for the requested device, prior to
- programming and enabling the physical hardware.
- @csdev: CoreSight device to program.
- @cfg_hash: Selector for the configuration.
- @preset: Preset parameter values to use, 0 for current / default values.
- */
+int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset)
+{
struct cscfg_config_csdev *config_csdev_active = NULL, *config_csdev_item;
const struct cscfg_config_desc *config_desc;
int err = 0;
/* quickly check global count */
if (!atomic_read(&cscfg_mgr->sys_active_cnt))
return 0;
mutex_lock(&cscfg_csdev_mutex);
list_for_each_entry(config_csdev_item, &csdev->config_csdev_list, node) {
config_desc = config_csdev_item->config_desc;
if ((atomic_read(&config_desc->active_cnt)) &&
((unsigned long)config_desc->event_ea->var == cfg_hash)) {
config_csdev_active = config_csdev_item;
break;
}
}
if (config_csdev_active) {
err = cscfg_csdev_enable_config(config_csdev_active, preset);
if (!err)
csdev->active_cscfg_ctxt = (void *)config_csdev_active;
}
mutex_unlock(&cscfg_csdev_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_enable_active_config);
+/**
- cscfg_csdev_disable_active_config - disable an active config on the device.
- Disables the active configuration on the CoreSight device @csdev.
- Disable will save the values of any registers marked in the configurations
- as save on disable.
- Should be called after driver hardware disable for the requested device,
- after disabling the physical hardware and reading back registers.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev) +{
struct cscfg_config_csdev *config_csdev;
mutex_lock(&cscfg_csdev_mutex);
This line seems to cause a bug report when the kernel is compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y
I have tested this by applying the series to 5.10 kernel on Dragonboard 845c.
It only happens when strobing is used.
Thanks for reporting this. Unfortunately Mike is away and likely won't be able to look at this in time for the merge window. As such I backed out the complex configuration feature from the next branch but that code is still available on next-complex-configuration.
Thanks, Mathieu
The report is this:
[13431.885395] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 [13431.893919] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 3525, name: perf [13431.901882] CPU: 0 PID: 3525 Comm: perf Tainted: G W 5.10.0-rc5-17282-g923b456a55fb #124 [13431.911436] Hardware name: Thundercomm Dragonboard 845c (DT) [13431.917450] Call trace: [13431.919938] dump_backtrace+0x0/0x1a0 [13431.923644] show_stack+0x18/0x68 [13431.927008] dump_stack+0xd0/0x12c [13431.930444] ___might_sleep+0xf0/0x130 [13431.934228] __might_sleep+0x54/0x90 [13431.937945] mutex_lock+0x28/0x80 [13431.941468] cscfg_csdev_disable_active_config+0x24/0x50 [13431.946952] etm4_disable+0xf0/0x100 [13431.950571] etm_event_stop+0xb8/0x130 [13431.954380] etm_event_del+0x14/0x20 [13431.958008] event_sched_out.isra.0+0x84/0x1c8 [13431.962496] group_sched_out.part.0+0x44/0xc8 [13431.967010] __perf_event_disable+0xe4/0x198 [13431.971549] event_function+0x8c/0xe8 [13431.975256] remote_function+0x64/0x78 [13431.979161] generic_exec_single+0xa0/0x100 [13431.983876] smp_call_function_single+0x158/0x1d8 [13431.988629] event_function_call+0x128/0x138 [13431.992942] _perf_event_disable+0x48/0x70 [13431.997082] perf_event_for_each_child+0x3c/0x90 [13432.001751] _perf_ioctl+0x198/0x4a8 [13432.005359] perf_ioctl+0x4c/0x78 [13432.008715] __arm64_sys_ioctl+0xa8/0xf0 [13432.012835] el0_svc_common.constprop.0+0x78/0x1a0 [13432.017767] do_el0_svc+0x24/0x90 [13432.021616] el0_sync_handler+0x160/0x168 [13432.025670] el0_sync+0x174/0x180
config_csdev = (struct cscfg_config_csdev *)csdev->active_cscfg_ctxt;
if (config_csdev) {
cscfg_csdev_disable_config(config_csdev);
csdev->active_cscfg_ctxt = NULL;
}
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_disable_active_config);
/* Initialise system configuration management device. */
struct device *cscfg_device(void)
@@ -536,6 +707,7 @@ int __init cscfg_init(void) INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); INIT_LIST_HEAD(&cscfg_mgr->config_desc_list);
atomic_set(&cscfg_mgr->sys_active_cnt, 0); dev_info(cscfg_device(), "CoreSight Configuration manager initialised"); return 0;
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h index 5bcae3b374c6..a52775890670 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.h +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -24,12 +24,14 @@
- @csdev_desc_list: List of coresight devices registered with the configuration manager.
- @feat_desc_list: List of feature descriptors to load into registered devices.
- @config_desc_list: List of system configuration descriptors to load into registered devices.
- @sys_active_cnt: Total number of active config descriptor references.
*/ struct cscfg_manager { struct device dev; struct list_head csdev_desc_list; struct list_head feat_desc_list; struct list_head config_desc_list;
atomic_t sys_active_cnt;
};
/* get reference to dev in cscfg_manager */
@@ -61,5 +63,11 @@ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs, int cscfg_register_csdev(struct coresight_device *csdev, u32 match_flags, struct cscfg_csdev_feat_ops *ops); void cscfg_unregister_csdev(struct coresight_device *csdev); +int cscfg_activate_config(unsigned long cfg_hash); +void cscfg_deactivate_config(unsigned long cfg_hash); +void cscfg_csdev_reset_feats(struct coresight_device *csdev); +int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset);
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev);
#endif /* CORESIGHT_SYSCFG_H */ diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 6fb516e1b22e..a348049ee08b 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -222,6 +222,7 @@ struct coresight_sysfs_link {
- @has_conns_grp: Have added a "connections" group for sysfs links.
- @feature_csdev_list: List of complex feature programming added to the device.
- @config_csdev_list: List of system configurations added to the device.
*/ struct coresight_device { struct coresight_platform_data *pdata;
- @active_cscfg_ctxt: Context information for current active system configuration.
@@ -246,6 +247,7 @@ struct coresight_device { /* system configuration and feature lists */ struct list_head feature_csdev_list; struct list_head config_csdev_list;
void *active_cscfg_ctxt;
};
/*
-- Mike Leach Principal Engineer, ARM Ltd. Manchester Design Centre. UK
On Mon, 28 Jun 2021 at 20:56, Mathieu Poirier mathieu.poirier@linaro.org wrote:
On Fri, Jun 25, 2021 at 03:37:16PM +0100, Mike Leach wrote:
HI Branislav, Mathieu,
I have started to look into this as a top priority.
Perfect.
There was also a report from a build bot realted to an undefined reference to config_group_init_type_name(). Please see if there is something to do on that one as well - I haven't had the opportunity to look at the report.
Thanks, Mathieu
I spotted that too - its also on my todo list.
Mike
However, when I enable the CONFIG_DEBUG_ option my board fails to boot at all. (Dragonboard DB410c), so the resolution make take a little time.
At this point I am assuming that the mutex will need to be replaced by a spinlock - so a re-design + v8 set may well be required.
Regards
Mike
On Mon, 14 Jun 2021 at 18:03, Mathieu Poirier mathieu.poirier@linaro.org wrote:
Hi Branislav,
On Thu, 10 Jun 2021 at 05:05, Branislav Rankov branislav.rankov@arm.com wrote:
On 4/14/21 8:18 PM, Mike Leach wrote:
Configurations are first activated, then when any coresight device is enabled, the active configurations are checked and any matching one is enabled.
This patch provides the activation / enable API.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org
.../hwtracing/coresight/coresight-config.h | 2 + .../hwtracing/coresight/coresight-syscfg.c | 172 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 8 + include/linux/coresight.h | 2 + 4 files changed, 184 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h index 0667581822c1..25eb6c632692 100644 --- a/drivers/hwtracing/coresight/coresight-config.h +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -127,6 +127,7 @@ struct cscfg_feature_desc {
- @nr_total_params: Sum of all parameters declared by used features
- @presets: Array of preset values.
- @event_ea: Extended attribute for perf event value
*/ struct cscfg_config_desc {
- @active_cnt: ref count for activate on this configuration.
@@ -139,6 +140,7 @@ struct cscfg_config_desc { int nr_total_params; const u64 *presets; /* nr_presets * nr_total_params */ struct dev_ext_attribute *event_ea;
atomic_t active_cnt;
};
/**
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index e35f8c0ac2f8..b234e45c153f 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -283,6 +283,7 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) return err;
list_add(&config_desc->item, &cscfg_mgr->config_desc_list);
}atomic_set(&config_desc->active_cnt, 0); return 0;
@@ -468,6 +469,176 @@ void cscfg_unregister_csdev(struct coresight_device *csdev) } EXPORT_SYMBOL_GPL(cscfg_unregister_csdev);
+/**
- cscfg_csdev_reset_feats - reset features for a CoreSight device.
- Resets all parameters and register values for any features loaded
- into @csdev to their default values.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_reset_feats(struct coresight_device *csdev) +{
struct cscfg_feature_csdev *feat_csdev;
mutex_lock(&cscfg_csdev_mutex);
if (list_empty(&csdev->feature_csdev_list))
goto unlock_exit;
list_for_each_entry(feat_csdev, &csdev->feature_csdev_list, node)
cscfg_reset_feat(feat_csdev);
+unlock_exit:
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_reset_feats);
+/**
- cscfg_activate_config - Mark a configuration descriptor as active.
- This will be seen when csdev devices are enabled in the system.
- Only activated configurations can be enabled on individual devices.
- Activation protects the configuration from alteration or removal while
- active.
- Selection by hash value - generated from the configuration name when it
- was loaded and added to the cs_etm/configurations file system for selection
- by perf.
- Increments the configuration descriptor active count and the global active
- count.
- @cfg_hash: Hash value of the selected configuration name.
- */
+int cscfg_activate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
int err = -EINVAL;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
/*
* increment the global active count - control changes to
* active configurations
*/
atomic_inc(&cscfg_mgr->sys_active_cnt);
/*
* mark the descriptor as active so enable config on a
* device instance will use it
*/
atomic_inc(&config_desc->active_cnt);
err = 0;
dev_dbg(cscfg_device(), "Activate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_activate_config);
+/**
- cscfg_deactivate_config - Mark a config descriptor as inactive.
- Decrement the configuration and global active counts.
- @cfg_hash: Hash value of the selected configuration name.
- */
+void cscfg_deactivate_config(unsigned long cfg_hash) +{
struct cscfg_config_desc *config_desc;
mutex_lock(&cscfg_mutex);
list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) {
if ((unsigned long)config_desc->event_ea->var == cfg_hash) {
atomic_dec(&config_desc->active_cnt);
atomic_dec(&cscfg_mgr->sys_active_cnt);
dev_dbg(cscfg_device(), "Deactivate config %s.\n", config_desc->name);
break;
}
}
mutex_unlock(&cscfg_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_deactivate_config);
+/**
- cscfg_csdev_enable_active_config - Enable matching active configuration for device.
- Enables the configuration selected by @cfg_hash if the configuration is supported
- on the device and has been activated.
- If active and supported the CoreSight device @csdev will be programmed with the
- configuration, using @preset parameters.
- Should be called before driver hardware enable for the requested device, prior to
- programming and enabling the physical hardware.
- @csdev: CoreSight device to program.
- @cfg_hash: Selector for the configuration.
- @preset: Preset parameter values to use, 0 for current / default values.
- */
+int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset)
+{
struct cscfg_config_csdev *config_csdev_active = NULL, *config_csdev_item;
const struct cscfg_config_desc *config_desc;
int err = 0;
/* quickly check global count */
if (!atomic_read(&cscfg_mgr->sys_active_cnt))
return 0;
mutex_lock(&cscfg_csdev_mutex);
list_for_each_entry(config_csdev_item, &csdev->config_csdev_list, node) {
config_desc = config_csdev_item->config_desc;
if ((atomic_read(&config_desc->active_cnt)) &&
((unsigned long)config_desc->event_ea->var == cfg_hash)) {
config_csdev_active = config_csdev_item;
break;
}
}
if (config_csdev_active) {
err = cscfg_csdev_enable_config(config_csdev_active, preset);
if (!err)
csdev->active_cscfg_ctxt = (void *)config_csdev_active;
}
mutex_unlock(&cscfg_csdev_mutex);
return err;
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_enable_active_config);
+/**
- cscfg_csdev_disable_active_config - disable an active config on the device.
- Disables the active configuration on the CoreSight device @csdev.
- Disable will save the values of any registers marked in the configurations
- as save on disable.
- Should be called after driver hardware disable for the requested device,
- after disabling the physical hardware and reading back registers.
- @csdev: The CoreSight device.
- */
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev) +{
struct cscfg_config_csdev *config_csdev;
mutex_lock(&cscfg_csdev_mutex);
This line seems to cause a bug report when the kernel is compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y
I have tested this by applying the series to 5.10 kernel on Dragonboard 845c.
It only happens when strobing is used.
Thanks for reporting this. Unfortunately Mike is away and likely won't be able to look at this in time for the merge window. As such I backed out the complex configuration feature from the next branch but that code is still available on next-complex-configuration.
Thanks, Mathieu
The report is this:
[13431.885395] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 [13431.893919] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 3525, name: perf [13431.901882] CPU: 0 PID: 3525 Comm: perf Tainted: G W 5.10.0-rc5-17282-g923b456a55fb #124 [13431.911436] Hardware name: Thundercomm Dragonboard 845c (DT) [13431.917450] Call trace: [13431.919938] dump_backtrace+0x0/0x1a0 [13431.923644] show_stack+0x18/0x68 [13431.927008] dump_stack+0xd0/0x12c [13431.930444] ___might_sleep+0xf0/0x130 [13431.934228] __might_sleep+0x54/0x90 [13431.937945] mutex_lock+0x28/0x80 [13431.941468] cscfg_csdev_disable_active_config+0x24/0x50 [13431.946952] etm4_disable+0xf0/0x100 [13431.950571] etm_event_stop+0xb8/0x130 [13431.954380] etm_event_del+0x14/0x20 [13431.958008] event_sched_out.isra.0+0x84/0x1c8 [13431.962496] group_sched_out.part.0+0x44/0xc8 [13431.967010] __perf_event_disable+0xe4/0x198 [13431.971549] event_function+0x8c/0xe8 [13431.975256] remote_function+0x64/0x78 [13431.979161] generic_exec_single+0xa0/0x100 [13431.983876] smp_call_function_single+0x158/0x1d8 [13431.988629] event_function_call+0x128/0x138 [13431.992942] _perf_event_disable+0x48/0x70 [13431.997082] perf_event_for_each_child+0x3c/0x90 [13432.001751] _perf_ioctl+0x198/0x4a8 [13432.005359] perf_ioctl+0x4c/0x78 [13432.008715] __arm64_sys_ioctl+0xa8/0xf0 [13432.012835] el0_svc_common.constprop.0+0x78/0x1a0 [13432.017767] do_el0_svc+0x24/0x90 [13432.021616] el0_sync_handler+0x160/0x168 [13432.025670] el0_sync+0x174/0x180
config_csdev = (struct cscfg_config_csdev *)csdev->active_cscfg_ctxt;
if (config_csdev) {
cscfg_csdev_disable_config(config_csdev);
csdev->active_cscfg_ctxt = NULL;
}
mutex_unlock(&cscfg_csdev_mutex);
+} +EXPORT_SYMBOL_GPL(cscfg_csdev_disable_active_config);
/* Initialise system configuration management device. */
struct device *cscfg_device(void)
@@ -536,6 +707,7 @@ int __init cscfg_init(void) INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); INIT_LIST_HEAD(&cscfg_mgr->config_desc_list);
atomic_set(&cscfg_mgr->sys_active_cnt, 0); dev_info(cscfg_device(), "CoreSight Configuration manager initialised"); return 0;
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h index 5bcae3b374c6..a52775890670 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.h +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -24,12 +24,14 @@
- @csdev_desc_list: List of coresight devices registered with the configuration manager.
- @feat_desc_list: List of feature descriptors to load into registered devices.
- @config_desc_list: List of system configuration descriptors to load into registered devices.
- @sys_active_cnt: Total number of active config descriptor references.
*/ struct cscfg_manager { struct device dev; struct list_head csdev_desc_list; struct list_head feat_desc_list; struct list_head config_desc_list;
atomic_t sys_active_cnt;
};
/* get reference to dev in cscfg_manager */
@@ -61,5 +63,11 @@ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs, int cscfg_register_csdev(struct coresight_device *csdev, u32 match_flags, struct cscfg_csdev_feat_ops *ops); void cscfg_unregister_csdev(struct coresight_device *csdev); +int cscfg_activate_config(unsigned long cfg_hash); +void cscfg_deactivate_config(unsigned long cfg_hash); +void cscfg_csdev_reset_feats(struct coresight_device *csdev); +int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
unsigned long cfg_hash, int preset);
+void cscfg_csdev_disable_active_config(struct coresight_device *csdev);
#endif /* CORESIGHT_SYSCFG_H */ diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 6fb516e1b22e..a348049ee08b 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -222,6 +222,7 @@ struct coresight_sysfs_link {
- @has_conns_grp: Have added a "connections" group for sysfs links.
- @feature_csdev_list: List of complex feature programming added to the device.
- @config_csdev_list: List of system configurations added to the device.
*/ struct coresight_device { struct coresight_platform_data *pdata;
- @active_cscfg_ctxt: Context information for current active system configuration.
@@ -246,6 +247,7 @@ struct coresight_device { /* system configuration and feature lists */ struct list_head feature_csdev_list; struct list_head config_csdev_list;
void *active_cscfg_ctxt;
};
/*
-- Mike Leach Principal Engineer, ARM Ltd. Manchester Design Centre. UK
Add calls to activate the selected configuration as perf starts and stops the tracing session.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org --- drivers/hwtracing/coresight/coresight-etm-perf.c | 14 +++++++++++++- drivers/hwtracing/coresight/coresight-etm-perf.h | 2 ++ 2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 26b4bca156aa..560baefdfed8 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -215,6 +215,10 @@ static void free_event_data(struct work_struct *work) /* Free the sink buffers, if there are any */ free_sink_buffer(event_data);
+ /* clear any configuration we were using */ + if (event_data->cfg_hash) + cscfg_deactivate_config(event_data->cfg_hash); + for_each_cpu(cpu, mask) { struct list_head **ppath;
@@ -292,7 +296,7 @@ static bool sinks_compatible(struct coresight_device *a, static void *etm_setup_aux(struct perf_event *event, void **pages, int nr_pages, bool overwrite) { - u32 id; + u32 id, cfg_hash; int cpu = event->cpu; cpumask_t *mask; struct coresight_device *sink = NULL; @@ -310,6 +314,14 @@ static void *etm_setup_aux(struct perf_event *event, void **pages, sink = user_sink = coresight_get_sink_by_id(id); }
+ /* check if user wants a coresight configuration selected */ + cfg_hash = (u32)((event->attr.config2 & GENMASK_ULL(63, 32)) >> 32); + if (cfg_hash) { + if (cscfg_activate_config(cfg_hash)) + goto err; + event_data->cfg_hash = cfg_hash; + } + mask = &event_data->mask;
/* diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.h b/drivers/hwtracing/coresight/coresight-etm-perf.h index ba617fe2217e..468f7799ab4f 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.h +++ b/drivers/hwtracing/coresight/coresight-etm-perf.h @@ -49,12 +49,14 @@ struct etm_filters { * @work: Handle to free allocated memory outside IRQ context. * @mask: Hold the CPU(s) this event was set for. * @snk_config: The sink configuration. + * @cfg_hash: The hash id of any coresight config selected. * @path: An array of path, each slot for one CPU. */ struct etm_event_data { struct work_struct work; cpumask_t mask; void *snk_config; + u32 cfg_hash; struct list_head * __percpu *path; };
Adds in handlers to allow the ETMv4 to use the complex configuration support. Features and configurations can be loaded and selected in the device.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org --- drivers/hwtracing/coresight/Makefile | 3 +- .../hwtracing/coresight/coresight-etm4x-cfg.c | 182 ++++++++++++++++++ .../hwtracing/coresight/coresight-etm4x-cfg.h | 15 ++ .../coresight/coresight-etm4x-core.c | 38 +++- .../coresight/coresight-etm4x-sysfs.c | 3 + 5 files changed, 238 insertions(+), 3 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-etm4x-cfg.c create mode 100644 drivers/hwtracing/coresight/coresight-etm4x-cfg.h
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index 63ecfc3cf66d..9420d33b23ac 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -16,7 +16,8 @@ obj-$(CONFIG_CORESIGHT_SOURCE_ETM3X) += coresight-etm3x.o coresight-etm3x-y := coresight-etm3x-core.o coresight-etm-cp14.o \ coresight-etm3x-sysfs.o obj-$(CONFIG_CORESIGHT_SOURCE_ETM4X) += coresight-etm4x.o -coresight-etm4x-y := coresight-etm4x-core.o coresight-etm4x-sysfs.o +coresight-etm4x-y := coresight-etm4x-core.o coresight-etm4x-sysfs.o \ + coresight-etm4x-cfg.o obj-$(CONFIG_CORESIGHT_STM) += coresight-stm.o obj-$(CONFIG_CORESIGHT_CPU_DEBUG) += coresight-cpu-debug.o obj-$(CONFIG_CORESIGHT_CATU) += coresight-catu.o diff --git a/drivers/hwtracing/coresight/coresight-etm4x-cfg.c b/drivers/hwtracing/coresight/coresight-etm4x-cfg.c new file mode 100644 index 000000000000..d2ea903231b2 --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-etm4x-cfg.c @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright(C) 2020 Linaro Limited. All rights reserved. + * Author: Mike Leach mike.leach@linaro.org + */ + +#include "coresight-etm4x.h" +#include "coresight-etm4x-cfg.h" +#include "coresight-priv.h" +#include "coresight-syscfg.h" + +/* defines to associate register IDs with driver data locations */ +#define CHECKREG(cval, elem) \ + { \ + if (offset == cval) { \ + reg_csdev->driver_regval = &drvcfg->elem; \ + err = 0; \ + break; \ + } \ + } + +#define CHECKREGIDX(cval, elem, off_idx, mask) \ + { \ + if (mask == cval) { \ + reg_csdev->driver_regval = &drvcfg->elem[off_idx]; \ + err = 0; \ + break; \ + } \ + } + +/** + * etm4_cfg_map_reg_offset - validate and map the register offset into a + * location in the driver config struct. + * + * Limits the number of registers that can be accessed and programmed in + * features, to those which are used to control the trace capture parameters. + * + * Omits or limits access to those which the driver must use exclusively. + * + * Invalid offsets will result in fail code return and feature load failure. + * + * @drvdata: driver data to map into. + * @reg: register to map. + * @offset: device offset for the register + */ +static int etm4_cfg_map_reg_offset(struct etmv4_drvdata *drvdata, + struct cscfg_regval_csdev *reg_csdev, u32 offset) +{ + int err = -EINVAL, idx; + struct etmv4_config *drvcfg = &drvdata->config; + u32 off_mask; + + if (((offset >= TRCEVENTCTL0R) && (offset <= TRCVIPCSSCTLR)) || + ((offset >= TRCSEQRSTEVR) && (offset <= TRCEXTINSELR)) || + ((offset >= TRCCIDCCTLR0) && (offset <= TRCVMIDCCTLR1))) { + do { + CHECKREG(TRCEVENTCTL0R, eventctrl0); + CHECKREG(TRCEVENTCTL1R, eventctrl1); + CHECKREG(TRCSTALLCTLR, stall_ctrl); + CHECKREG(TRCTSCTLR, ts_ctrl); + CHECKREG(TRCSYNCPR, syncfreq); + CHECKREG(TRCCCCTLR, ccctlr); + CHECKREG(TRCBBCTLR, bb_ctrl); + CHECKREG(TRCVICTLR, vinst_ctrl); + CHECKREG(TRCVIIECTLR, viiectlr); + CHECKREG(TRCVISSCTLR, vissctlr); + CHECKREG(TRCVIPCSSCTLR, vipcssctlr); + CHECKREG(TRCSEQRSTEVR, seq_rst); + CHECKREG(TRCSEQSTR, seq_state); + CHECKREG(TRCEXTINSELR, ext_inp); + CHECKREG(TRCCIDCCTLR0, ctxid_mask0); + CHECKREG(TRCCIDCCTLR1, ctxid_mask1); + CHECKREG(TRCVMIDCCTLR0, vmid_mask0); + CHECKREG(TRCVMIDCCTLR1, vmid_mask1); + } while (0); + } else if ((offset & GENMASK(11, 4)) == TRCSEQEVRn(0)) { + /* sequencer state control registers */ + idx = (offset & GENMASK(3, 0)) / 4; + if (idx < ETM_MAX_SEQ_STATES) { + reg_csdev->driver_regval = &drvcfg->seq_ctrl[idx]; + err = 0; + } + } else if ((offset >= TRCSSCCRn(0)) && (offset <= TRCSSPCICRn(7))) { + /* 32 bit, 8 off indexed register sets */ + idx = (offset & GENMASK(4, 0)) / 4; + off_mask = (offset & GENMASK(11, 5)); + do { + CHECKREGIDX(TRCSSCCRn(0), ss_ctrl, idx, off_mask); + CHECKREGIDX(TRCSSCSRn(0), ss_status, idx, off_mask); + CHECKREGIDX(TRCSSPCICRn(0), ss_pe_cmp, idx, off_mask); + } while (0); + } else if ((offset >= TRCCIDCVRn(0)) && (offset <= TRCVMIDCVRn(7))) { + /* 64 bit, 8 off indexed register sets */ + idx = (offset & GENMASK(5, 0)) / 8; + off_mask = (offset & GENMASK(11, 6)); + do { + CHECKREGIDX(TRCCIDCVRn(0), ctxid_pid, idx, off_mask); + CHECKREGIDX(TRCVMIDCVRn(0), vmid_val, idx, off_mask); + } while (0); + } else if ((offset >= TRCRSCTLRn(2)) && + (offset <= TRCRSCTLRn((ETM_MAX_RES_SEL - 1)))) { + /* 32 bit resource selection regs, 32 off, skip fixed 0,1 */ + idx = (offset & GENMASK(6, 0)) / 4; + if (idx < ETM_MAX_RES_SEL) { + reg_csdev->driver_regval = &drvcfg->res_ctrl[idx]; + err = 0; + } + } else if ((offset >= TRCACVRn(0)) && + (offset <= TRCACATRn((ETM_MAX_SINGLE_ADDR_CMP - 1)))) { + /* 64 bit addr cmp regs, 16 off */ + idx = (offset & GENMASK(6, 0)) / 8; + off_mask = offset & GENMASK(11, 7); + do { + CHECKREGIDX(TRCACVRn(0), addr_val, idx, off_mask); + CHECKREGIDX(TRCACATRn(0), addr_acc, idx, off_mask); + } while (0); + } else if ((offset >= TRCCNTRLDVRn(0)) && + (offset <= TRCCNTVRn((ETMv4_MAX_CNTR - 1)))) { + /* 32 bit counter regs, 4 off (ETMv4_MAX_CNTR - 1) */ + idx = (offset & GENMASK(3, 0)) / 4; + off_mask = offset & GENMASK(11, 4); + do { + CHECKREGIDX(TRCCNTRLDVRn(0), cntrldvr, idx, off_mask); + CHECKREGIDX(TRCCNTCTLRn(0), cntr_ctrl, idx, off_mask); + CHECKREGIDX(TRCCNTVRn(0), cntr_val, idx, off_mask); + } while (0); + } + return err; +} + +/** + * etm4_cfg_load_feature - load a feature into a device instance. + * + * @csdev: An ETMv4 CoreSight device. + * @feat: The feature to be loaded. + * + * The function will load a feature instance into the device, checking that + * the register definitions are valid for the device. + * + * Parameter and register definitions will be converted into internal + * structures that are used to set the values in the driver when the + * feature is enabled for the device. + * + * The feature spinlock pointer is initialised to the same spinlock + * that the driver uses to protect the internal register values. + */ +static int etm4_cfg_load_feature(struct coresight_device *csdev, + struct cscfg_feature_csdev *feat_csdev) +{ + struct device *dev = csdev->dev.parent; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev); + const struct cscfg_feature_desc *feat_desc = feat_csdev->feat_desc; + u32 offset; + int i = 0, err = 0; + + /* + * essential we set the device spinlock - this is used in the generic + * programming routines when copying values into the drvdata structures + * via the pointers setup in etm4_cfg_map_reg_offset(). + */ + feat_csdev->drv_spinlock = &drvdata->spinlock; + + /* process the register descriptions */ + for (i = 0; i < feat_csdev->nr_regs && !err; i++) { + offset = feat_desc->regs_desc[i].offset; + err = etm4_cfg_map_reg_offset(drvdata, &feat_csdev->regs_csdev[i], offset); + } + return err; +} + +/* match information when loading configurations */ +#define CS_CFG_ETM4_MATCH_FLAGS (CS_CFG_MATCH_CLASS_SRC_ALL | \ + CS_CFG_MATCH_CLASS_SRC_ETM4) + +int etm4_cscfg_register(struct coresight_device *csdev) +{ + struct cscfg_csdev_feat_ops ops; + + ops.load_feat = &etm4_cfg_load_feature; + + return cscfg_register_csdev(csdev, CS_CFG_ETM4_MATCH_FLAGS, &ops); +} diff --git a/drivers/hwtracing/coresight/coresight-etm4x-cfg.h b/drivers/hwtracing/coresight/coresight-etm4x-cfg.h new file mode 100644 index 000000000000..a204ad9a4792 --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-etm4x-cfg.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2014-2020, The Linux Foundation. All rights reserved. + */ + +#ifndef _CORESIGHT_ETM4X_CFG_H +#define _CORESIGHT_ETM4X_CFG_H + +#include "coresight-config.h" +#include "coresight-etm4x.h" + +/* ETMv4 specific config functions */ +int etm4_cscfg_register(struct coresight_device *csdev); + +#endif /* CORESIGHT_ETM4X_CFG_H */ diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index efb84ced83dd..94f10910d20d 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -39,6 +39,8 @@
#include "coresight-etm4x.h" #include "coresight-etm-perf.h" +#include "coresight-etm4x-cfg.h" +#include "coresight-syscfg.h"
static int boot_enable; module_param(boot_enable, int, 0444); @@ -561,12 +563,15 @@ static int etm4_config_timestamp_event(struct etmv4_drvdata *drvdata) return ret; }
-static int etm4_parse_event_config(struct etmv4_drvdata *drvdata, +static int etm4_parse_event_config(struct coresight_device *csdev, struct perf_event *event) { int ret = 0; + struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); struct etmv4_config *config = &drvdata->config; struct perf_event_attr *attr = &event->attr; + unsigned long cfg_hash; + int preset;
if (!attr) { ret = -EINVAL; @@ -637,6 +642,20 @@ static int etm4_parse_event_config(struct etmv4_drvdata *drvdata, /* bit[12], Return stack enable bit */ config->cfg |= BIT(12);
+ /* + * Set any selected configuration and preset. + * + * This extracts the values of PMU_FORMAT_ATTR(configid) and PMU_FORMAT_ATTR(preset) + * in the perf attributes defined in coresight-etm-perf.c. + * configid uses bits 63:32 of attr->config2, preset uses bits 3:0 of attr->config. + * A zero configid means no configuration active, preset = 0 means no preset selected. + */ + if (attr->config2 & GENMASK_ULL(63, 32)) { + cfg_hash = (u32)(attr->config2 >> 32); + preset = attr->config & 0xF; + ret = cscfg_csdev_enable_active_config(csdev, cfg_hash, preset); + } + out: return ret; } @@ -653,7 +672,7 @@ static int etm4_enable_perf(struct coresight_device *csdev, }
/* Configure the tracer based on the session's specifics */ - ret = etm4_parse_event_config(drvdata, event); + ret = etm4_parse_event_config(csdev, event); if (ret) goto out; /* And enable it */ @@ -799,11 +818,18 @@ static int etm4_disable_perf(struct coresight_device *csdev, u32 control; struct etm_filters *filters = event->hw.addr_filters; struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); + struct perf_event_attr *attr = &event->attr;
if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id())) return -EINVAL;
etm4_disable_hw(drvdata); + /* + * The config_id occupies bits 63:32 of the config2 perf event attr + * field. If this is non-zero then we will have enabled a config. + */ + if (attr->config2 & GENMASK_ULL(63, 32)) + cscfg_csdev_disable_active_config(csdev);
/* * Check if the start/stop logic was active when the unit was stopped. @@ -1944,6 +1970,13 @@ static int etm4_probe(struct device *dev, void __iomem *base, u32 etm_pid) return ret; }
+ /* register with config infrastructure & load any current features */ + ret = etm4_cscfg_register(drvdata->csdev); + if (ret) { + coresight_unregister(drvdata->csdev); + return ret; + } + etmdrvdata[drvdata->cpu] = drvdata;
dev_info(&drvdata->csdev->dev, "CPU%d: %s v%d.%d initialized\n", @@ -2030,6 +2063,7 @@ static int __exit etm4_remove_dev(struct etmv4_drvdata *drvdata)
cpus_read_unlock();
+ cscfg_unregister_csdev(drvdata->csdev); coresight_unregister(drvdata->csdev);
return 0; diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index 007bad9e7ad8..a0640fa5c55b 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -9,6 +9,7 @@ #include <linux/sysfs.h> #include "coresight-etm4x.h" #include "coresight-priv.h" +#include "coresight-syscfg.h"
static int etm4_set_mode_exclude(struct etmv4_drvdata *drvdata, bool exclude) { @@ -269,6 +270,8 @@ static ssize_t reset_store(struct device *dev,
spin_unlock(&drvdata->spinlock);
+ cscfg_csdev_reset_feats(to_coresight_device(dev)); + return size; } static DEVICE_ATTR_WO(reset);
Preload set of configurations.
This patch creates a small set of preloaded configurations and features that are available immediately after coresight has been initialised.
The current set provides a strobing feature for ETMv4, that creates a periodic sampling of trace by switching trace generation on and off using counters in the ETM.
A configuration called "autofdo" is also provided that uses the 'strobing' feature and provides a couple of preset values, selectable on the perf command line.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org --- drivers/hwtracing/coresight/Makefile | 3 +- .../hwtracing/coresight/coresight-cfg-afdo.c | 153 ++++++++++++++++++ .../coresight/coresight-cfg-preload.c | 31 ++++ .../coresight/coresight-cfg-preload.h | 13 ++ .../hwtracing/coresight/coresight-etm4x-cfg.h | 15 ++ .../hwtracing/coresight/coresight-syscfg.c | 9 ++ .../hwtracing/coresight/coresight-syscfg.h | 1 + 7 files changed, 224 insertions(+), 1 deletion(-) create mode 100644 drivers/hwtracing/coresight/coresight-cfg-afdo.c create mode 100644 drivers/hwtracing/coresight/coresight-cfg-preload.c create mode 100644 drivers/hwtracing/coresight/coresight-cfg-preload.h
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index 9420d33b23ac..ad44f0fe3069 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -4,7 +4,8 @@ # obj-$(CONFIG_CORESIGHT) += coresight.o coresight-y := coresight-core.o coresight-etm-perf.o coresight-platform.o \ - coresight-sysfs.o coresight-syscfg.o coresight-config.o + coresight-sysfs.o coresight-syscfg.o coresight-config.o \ + coresight-cfg-preload.o coresight-cfg-afdo.o obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o coresight-tmc-y := coresight-tmc-core.o coresight-tmc-etf.o \ coresight-tmc-etr.o diff --git a/drivers/hwtracing/coresight/coresight-cfg-afdo.c b/drivers/hwtracing/coresight/coresight-cfg-afdo.c new file mode 100644 index 000000000000..84b31184252b --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-cfg-afdo.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright(C) 2020 Linaro Limited. All rights reserved. + * Author: Mike Leach mike.leach@linaro.org + */ + +#include "coresight-config.h" + +/* ETMv4 includes and features */ +#if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X) +#include "coresight-etm4x-cfg.h" + +/* preload configurations and features */ + +/* preload in features for ETMv4 */ + +/* strobe feature */ +static struct cscfg_parameter_desc strobe_params[] = { + { + .name = "window", + .value = 5000, + }, + { + .name = "period", + .value = 10000, + }, +}; + +static struct cscfg_regval_desc strobe_regs[] = { + /* resource selectors */ + { + .type = CS_CFG_REG_TYPE_RESOURCE, + .offset = TRCRSCTLRn(2), + .hw_info = ETM4_CFG_RES_SEL, + .val32 = 0x20001, + }, + { + .type = CS_CFG_REG_TYPE_RESOURCE, + .offset = TRCRSCTLRn(3), + .hw_info = ETM4_CFG_RES_SEQ, + .val32 = 0x20002, + }, + /* strobe window counter 0 - reload from param 0 */ + { + .type = CS_CFG_REG_TYPE_RESOURCE | CS_CFG_REG_TYPE_VAL_SAVE, + .offset = TRCCNTVRn(0), + .hw_info = ETM4_CFG_RES_CTR, + }, + { + .type = CS_CFG_REG_TYPE_RESOURCE | CS_CFG_REG_TYPE_VAL_PARAM, + .offset = TRCCNTRLDVRn(0), + .hw_info = ETM4_CFG_RES_CTR, + .val32 = 0, + }, + { + .type = CS_CFG_REG_TYPE_RESOURCE, + .offset = TRCCNTCTLRn(0), + .hw_info = ETM4_CFG_RES_CTR, + .val32 = 0x10001, + }, + /* strobe period counter 1 - reload from param 1 */ + { + .type = CS_CFG_REG_TYPE_RESOURCE | CS_CFG_REG_TYPE_VAL_SAVE, + .offset = TRCCNTVRn(1), + .hw_info = ETM4_CFG_RES_CTR, + }, + { + .type = CS_CFG_REG_TYPE_RESOURCE | CS_CFG_REG_TYPE_VAL_PARAM, + .offset = TRCCNTRLDVRn(1), + .hw_info = ETM4_CFG_RES_CTR, + .val32 = 1, + }, + { + .type = CS_CFG_REG_TYPE_RESOURCE, + .offset = TRCCNTCTLRn(1), + .hw_info = ETM4_CFG_RES_CTR, + .val32 = 0x8102, + }, + /* sequencer */ + { + .type = CS_CFG_REG_TYPE_RESOURCE, + .offset = TRCSEQEVRn(0), + .hw_info = ETM4_CFG_RES_SEQ, + .val32 = 0x0081, + }, + { + .type = CS_CFG_REG_TYPE_RESOURCE, + .offset = TRCSEQEVRn(1), + .hw_info = ETM4_CFG_RES_SEQ, + .val32 = 0x0000, + }, + /* view-inst */ + { + .type = CS_CFG_REG_TYPE_STD | CS_CFG_REG_TYPE_VAL_MASK, + .offset = TRCVICTLR, + .val32 = 0x0003, + .mask32 = 0x0003, + }, + /* end of regs */ +}; + +struct cscfg_feature_desc strobe_etm4x = { + .name = "strobing", + .description = "Generate periodic trace capture windows.\n" + "parameter 'window': a number of CPU cycles (W)\n" + "parameter 'period': trace enabled for W cycles every period x W cycles\n", + .match_flags = CS_CFG_MATCH_CLASS_SRC_ETM4, + .nr_params = ARRAY_SIZE(strobe_params), + .params_desc = strobe_params, + .nr_regs = ARRAY_SIZE(strobe_regs), + .regs_desc = strobe_regs, +}; + +/* create an autofdo configuration */ + +/* we will provide 9 sets of preset parameter values */ +#define AFDO_NR_PRESETS 9 +/* the total number of parameters in used features */ +#define AFDO_NR_PARAMS ARRAY_SIZE(strobe_params) + +static const char *afdo_ref_names[] = { + "strobing", +}; + +/* + * set of presets leaves strobing window constant while varying period to allow + * experimentation with mark / space ratios for various workloads + */ +static u64 afdo_presets[AFDO_NR_PRESETS][AFDO_NR_PARAMS] = { + { 5000, 2 }, + { 5000, 4 }, + { 5000, 8 }, + { 5000, 16 }, + { 5000, 64 }, + { 5000, 128 }, + { 5000, 512 }, + { 5000, 1024 }, + { 5000, 4096 }, +}; + +struct cscfg_config_desc afdo_etm4x = { + .name = "autofdo", + .description = "Setup ETMs with strobing for autofdo\n" + "Supplied presets allow experimentation with mark-space ratio for various loads\n", + .nr_feat_refs = ARRAY_SIZE(afdo_ref_names), + .feat_ref_names = afdo_ref_names, + .nr_presets = AFDO_NR_PRESETS, + .nr_total_params = AFDO_NR_PARAMS, + .presets = &afdo_presets[0][0], +}; + +/* end of ETM4x configurations */ +#endif /* IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X) */ diff --git a/drivers/hwtracing/coresight/coresight-cfg-preload.c b/drivers/hwtracing/coresight/coresight-cfg-preload.c new file mode 100644 index 000000000000..751af3710d56 --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-cfg-preload.c @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright(C) 2020 Linaro Limited. All rights reserved. + * Author: Mike Leach mike.leach@linaro.org + */ + +#include "coresight-cfg-preload.h" +#include "coresight-config.h" +#include "coresight-syscfg.h" + +/* Basic features and configurations pre-loaded on initialisation */ + +static struct cscfg_feature_desc *preload_feats[] = { +#if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X) + &strobe_etm4x, +#endif + NULL +}; + +static struct cscfg_config_desc *preload_cfgs[] = { +#if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X) + &afdo_etm4x, +#endif + NULL +}; + +/* preload called on initialisation */ +int cscfg_preload(void) +{ + return cscfg_load_config_sets(preload_cfgs, preload_feats); +} diff --git a/drivers/hwtracing/coresight/coresight-cfg-preload.h b/drivers/hwtracing/coresight/coresight-cfg-preload.h new file mode 100644 index 000000000000..21299e175477 --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-cfg-preload.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright(C) 2020 Linaro Limited. All rights reserved. + * Author: Mike Leach mike.leach@linaro.org + */ + +/* declare preloaded configurations and features */ + +/* from coresight-cfg-afdo.c - etm 4x features */ +#if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X) +extern struct cscfg_feature_desc strobe_etm4x; +extern struct cscfg_config_desc afdo_etm4x; +#endif diff --git a/drivers/hwtracing/coresight/coresight-etm4x-cfg.h b/drivers/hwtracing/coresight/coresight-etm4x-cfg.h index a204ad9a4792..32dab34c1dac 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-cfg.h +++ b/drivers/hwtracing/coresight/coresight-etm4x-cfg.h @@ -9,6 +9,21 @@ #include "coresight-config.h" #include "coresight-etm4x.h"
+/* ETMv4 specific config defines */ + +/* resource IDs */ + +#define ETM4_CFG_RES_CTR 0x001 +#define ETM4_CFG_RES_CMP 0x002 +#define ETM4_CFG_RES_CMP_PAIR0 0x003 +#define ETM4_CFG_RES_CMP_PAIR1 0x004 +#define ETM4_CFG_RES_SEL 0x005 +#define ETM4_CFG_RES_SEL_PAIR0 0x006 +#define ETM4_CFG_RES_SEL_PAIR1 0x007 +#define ETM4_CFG_RES_SEQ 0x008 +#define ETM4_CFG_RES_TS 0x009 +#define ETM4_CFG_RES_MASK 0x00F + /* ETMv4 specific config functions */ int etm4_cscfg_register(struct coresight_device *csdev);
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index b234e45c153f..41f742190639 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -709,8 +709,17 @@ int __init cscfg_init(void) INIT_LIST_HEAD(&cscfg_mgr->config_desc_list); atomic_set(&cscfg_mgr->sys_active_cnt, 0);
+ /* preload built-in configurations */ + err = cscfg_preload(); + if (err) + goto exit_err; + dev_info(cscfg_device(), "CoreSight Configuration manager initialised"); return 0; + +exit_err: + cscfg_clear_device(); + return err; }
void cscfg_exit(void) diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h index a52775890670..7bb8c8e497ba 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.h +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -56,6 +56,7 @@ struct cscfg_registered_csdev { /* internal core operations for cscfg */ int __init cscfg_init(void); void cscfg_exit(void); +int cscfg_preload(void);
/* syscfg manager external API */ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs,
Adds configfs subsystem and attributes to the configuration manager to enable the listing of loaded configurations and features.
The default values of feature parameters can be accessed and altered from these attributes to affect all installed devices using the feature.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org --- drivers/hwtracing/coresight/Makefile | 3 +- .../coresight/coresight-syscfg-configfs.c | 396 ++++++++++++++++++ .../coresight/coresight-syscfg-configfs.h | 45 ++ .../hwtracing/coresight/coresight-syscfg.c | 76 ++++ .../hwtracing/coresight/coresight-syscfg.h | 7 + 5 files changed, 526 insertions(+), 1 deletion(-) create mode 100644 drivers/hwtracing/coresight/coresight-syscfg-configfs.c create mode 100644 drivers/hwtracing/coresight/coresight-syscfg-configfs.h
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index ad44f0fe3069..b6c4a48140ec 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -5,7 +5,8 @@ obj-$(CONFIG_CORESIGHT) += coresight.o coresight-y := coresight-core.o coresight-etm-perf.o coresight-platform.o \ coresight-sysfs.o coresight-syscfg.o coresight-config.o \ - coresight-cfg-preload.o coresight-cfg-afdo.o + coresight-cfg-preload.o coresight-cfg-afdo.o \ + coresight-syscfg-configfs.o obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o coresight-tmc-y := coresight-tmc-core.o coresight-tmc-etf.o \ coresight-tmc-etr.o diff --git a/drivers/hwtracing/coresight/coresight-syscfg-configfs.c b/drivers/hwtracing/coresight/coresight-syscfg-configfs.c new file mode 100644 index 000000000000..c547816b9000 --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-syscfg-configfs.c @@ -0,0 +1,396 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Linaro Limited, All rights reserved. + * Author: Mike Leach mike.leach@linaro.org + */ + +#include <linux/configfs.h> + +#include "coresight-syscfg-configfs.h" + +/* create a default ci_type. */ +static inline struct config_item_type *cscfg_create_ci_type(void) +{ + struct config_item_type *ci_type; + + ci_type = devm_kzalloc(cscfg_device(), sizeof(*ci_type), GFP_KERNEL); + if (ci_type) + ci_type->ct_owner = THIS_MODULE; + + return ci_type; +} + +/* configurations sub-group */ + +/* attributes for the config view group */ +static ssize_t cscfg_cfg_description_show(struct config_item *item, char *page) +{ + struct cscfg_fs_config *fs_config = container_of(to_config_group(item), + struct cscfg_fs_config, group); + + return scnprintf(page, PAGE_SIZE, "%s", fs_config->config_desc->description); +} +CONFIGFS_ATTR_RO(cscfg_cfg_, description); + +static ssize_t cscfg_cfg_feature_refs_show(struct config_item *item, char *page) +{ + struct cscfg_fs_config *fs_config = container_of(to_config_group(item), + struct cscfg_fs_config, group); + const struct cscfg_config_desc *config_desc = fs_config->config_desc; + ssize_t ch_used = 0; + int i; + + for (i = 0; i < config_desc->nr_feat_refs; i++) + ch_used += scnprintf(page + ch_used, PAGE_SIZE - ch_used, + "%s\n", config_desc->feat_ref_names[i]); + return ch_used; +} +CONFIGFS_ATTR_RO(cscfg_cfg_, feature_refs); + +/* list preset values in order of features and params */ +static ssize_t cscfg_cfg_values_show(struct config_item *item, char *page) +{ + const struct cscfg_feature_desc *feat_desc; + const struct cscfg_config_desc *config_desc; + struct cscfg_fs_preset *fs_preset; + int i, j, val_idx, preset_idx; + ssize_t used = 0; + + fs_preset = container_of(to_config_group(item), struct cscfg_fs_preset, group); + config_desc = fs_preset->config_desc; + + if (!config_desc->nr_presets) + return 0; + + preset_idx = fs_preset->preset_num - 1; + + /* start index on the correct array line */ + val_idx = config_desc->nr_total_params * preset_idx; + + /* + * A set of presets is the sum of all params in used features, + * in order of declaration of features and params in the features + */ + for (i = 0; i < config_desc->nr_feat_refs; i++) { + feat_desc = cscfg_get_named_feat_desc(config_desc->feat_ref_names[i]); + for (j = 0; j < feat_desc->nr_params; j++) { + used += scnprintf(page + used, PAGE_SIZE - used, + "%s.%s = 0x%llx ", + feat_desc->name, + feat_desc->params_desc[j].name, + config_desc->presets[val_idx++]); + } + } + used += scnprintf(page + used, PAGE_SIZE - used, "\n"); + + return used; +} +CONFIGFS_ATTR_RO(cscfg_cfg_, values); + +static struct configfs_attribute *cscfg_config_view_attrs[] = { + &cscfg_cfg_attr_description, + &cscfg_cfg_attr_feature_refs, + NULL, +}; + +static struct config_item_type cscfg_config_view_type = { + .ct_owner = THIS_MODULE, + .ct_attrs = cscfg_config_view_attrs, +}; + +static struct configfs_attribute *cscfg_config_preset_attrs[] = { + &cscfg_cfg_attr_values, + NULL, +}; + +static struct config_item_type cscfg_config_preset_type = { + .ct_owner = THIS_MODULE, + .ct_attrs = cscfg_config_preset_attrs, +}; + +static int cscfg_add_preset_groups(struct cscfg_fs_config *cfg_view) +{ + int preset_num; + struct cscfg_fs_preset *cfg_fs_preset; + struct cscfg_config_desc *config_desc = cfg_view->config_desc; + char name[CONFIGFS_ITEM_NAME_LEN]; + + if (!config_desc->nr_presets) + return 0; + + for (preset_num = 1; preset_num <= config_desc->nr_presets; preset_num++) { + cfg_fs_preset = devm_kzalloc(cscfg_device(), + sizeof(struct cscfg_fs_preset), GFP_KERNEL); + + if (!cfg_fs_preset) + return -ENOMEM; + + snprintf(name, CONFIGFS_ITEM_NAME_LEN, "preset%d", preset_num); + cfg_fs_preset->preset_num = preset_num; + cfg_fs_preset->config_desc = cfg_view->config_desc; + config_group_init_type_name(&cfg_fs_preset->group, name, + &cscfg_config_preset_type); + configfs_add_default_group(&cfg_fs_preset->group, &cfg_view->group); + } + return 0; +} + +static struct config_group *cscfg_create_config_group(struct cscfg_config_desc *config_desc) +{ + struct cscfg_fs_config *cfg_view; + struct device *dev = cscfg_device(); + int err; + + if (!dev) + return ERR_PTR(-EINVAL); + + cfg_view = devm_kzalloc(dev, sizeof(struct cscfg_fs_config), GFP_KERNEL); + if (!cfg_view) + return ERR_PTR(-ENOMEM); + + cfg_view->config_desc = config_desc; + config_group_init_type_name(&cfg_view->group, config_desc->name, &cscfg_config_view_type); + + /* add in a preset<n> dir for each preset */ + err = cscfg_add_preset_groups(cfg_view); + if (err) + return ERR_PTR(err); + + return &cfg_view->group; +} + +/* attributes for features view */ + +static ssize_t cscfg_feat_description_show(struct config_item *item, char *page) +{ + struct cscfg_fs_feature *fs_feat = container_of(to_config_group(item), + struct cscfg_fs_feature, group); + + return scnprintf(page, PAGE_SIZE, "%s", fs_feat->feat_desc->description); +} +CONFIGFS_ATTR_RO(cscfg_feat_, description); + +static ssize_t cscfg_feat_matches_show(struct config_item *item, char *page) +{ + struct cscfg_fs_feature *fs_feat = container_of(to_config_group(item), + struct cscfg_fs_feature, group); + u32 match_flags = fs_feat->feat_desc->match_flags; + int used = 0; + + if (match_flags & CS_CFG_MATCH_CLASS_SRC_ALL) + used = scnprintf(page, PAGE_SIZE, "SRC_ALL "); + + if (match_flags & CS_CFG_MATCH_CLASS_SRC_ETM4) + used += scnprintf(page + used, PAGE_SIZE - used, "SRC_ETMV4 "); + + used += scnprintf(page + used, PAGE_SIZE - used, "\n"); + return used; +} +CONFIGFS_ATTR_RO(cscfg_feat_, matches); + +static ssize_t cscfg_feat_nr_params_show(struct config_item *item, char *page) +{ + struct cscfg_fs_feature *fs_feat = container_of(to_config_group(item), + struct cscfg_fs_feature, group); + + return scnprintf(page, PAGE_SIZE, "%d\n", fs_feat->feat_desc->nr_params); +} +CONFIGFS_ATTR_RO(cscfg_feat_, nr_params); + +/* base feature desc attrib structures */ +static struct configfs_attribute *cscfg_feature_view_attrs[] = { + &cscfg_feat_attr_description, + &cscfg_feat_attr_matches, + &cscfg_feat_attr_nr_params, + NULL, +}; + +static struct config_item_type cscfg_feature_view_type = { + .ct_owner = THIS_MODULE, + .ct_attrs = cscfg_feature_view_attrs, +}; + +static ssize_t cscfg_param_value_show(struct config_item *item, char *page) +{ + struct cscfg_fs_param *param_item = container_of(to_config_group(item), + struct cscfg_fs_param, group); + u64 value = param_item->feat_desc->params_desc[param_item->param_idx].value; + + return scnprintf(page, PAGE_SIZE, "0x%llx\n", value); +} + +static ssize_t cscfg_param_value_store(struct config_item *item, + const char *page, size_t size) +{ + struct cscfg_fs_param *param_item = container_of(to_config_group(item), + struct cscfg_fs_param, group); + struct cscfg_feature_desc *feat_desc = param_item->feat_desc; + int param_idx = param_item->param_idx; + u64 value; + int err; + + err = kstrtoull(page, 0, &value); + if (!err) + err = cscfg_update_feat_param_val(feat_desc, param_idx, value); + + return err ? err : size; +} +CONFIGFS_ATTR(cscfg_param_, value); + +static struct configfs_attribute *cscfg_param_view_attrs[] = { + &cscfg_param_attr_value, + NULL, +}; + +static struct config_item_type cscfg_param_view_type = { + .ct_owner = THIS_MODULE, + .ct_attrs = cscfg_param_view_attrs, +}; + +/* + * configfs has far less functionality provided to add attributes dynamically than sysfs, + * and the show and store fns pass the enclosing config_item so the actual attribute cannot + * be determined. Therefore we add each item as a group directory, with a value attribute. + */ +static int cscfg_create_params_group_items(struct cscfg_feature_desc *feat_desc, + struct config_group *params_group) +{ + struct device *dev = cscfg_device(); + struct cscfg_fs_param *param_item; + int i; + + /* parameter items - as groups with default_value attribute */ + for (i = 0; i < feat_desc->nr_params; i++) { + param_item = devm_kzalloc(dev, sizeof(struct cscfg_fs_param), GFP_KERNEL); + if (!param_item) + return -ENOMEM; + param_item->feat_desc = feat_desc; + param_item->param_idx = i; + config_group_init_type_name(¶m_item->group, + feat_desc->params_desc[i].name, + &cscfg_param_view_type); + configfs_add_default_group(¶m_item->group, params_group); + } + return 0; +} + +static struct config_group *cscfg_create_feature_group(struct cscfg_feature_desc *feat_desc) +{ + struct cscfg_fs_feature *feat_view; + struct config_item_type *params_group_type; + struct config_group *params_group = NULL; + struct device *dev = cscfg_device(); + int item_err; + + if (!dev) + return ERR_PTR(-EINVAL); + + feat_view = devm_kzalloc(dev, sizeof(struct cscfg_fs_feature), GFP_KERNEL); + if (!feat_view) + return ERR_PTR(-ENOMEM); + + if (feat_desc->nr_params) { + params_group = devm_kzalloc(dev, sizeof(struct config_group), GFP_KERNEL); + if (!params_group) + return ERR_PTR(-ENOMEM); + + params_group_type = cscfg_create_ci_type(); + if (!params_group_type) + return ERR_PTR(-ENOMEM); + } + + feat_view->feat_desc = feat_desc; + config_group_init_type_name(&feat_view->group, + feat_desc->name, + &cscfg_feature_view_type); + if (params_group) { + config_group_init_type_name(params_group, "params", params_group_type); + configfs_add_default_group(params_group, &feat_view->group); + item_err = cscfg_create_params_group_items(feat_desc, params_group); + if (item_err) + return ERR_PTR(item_err); + } + return &feat_view->group; +} + +static struct config_item_type cscfg_configs_type = { + .ct_owner = THIS_MODULE, +}; + +static struct config_group cscfg_configs_grp = { + .cg_item = { + .ci_namebuf = "configurations", + .ci_type = &cscfg_configs_type, + }, +}; + +/* add configuration to configurations group */ +int cscfg_configfs_add_config(struct cscfg_config_desc *config_desc) +{ + struct config_group *new_group; + int err; + + new_group = cscfg_create_config_group(config_desc); + if (IS_ERR(new_group)) + return PTR_ERR(new_group); + err = configfs_register_group(&cscfg_configs_grp, new_group); + return err; +} + +static struct config_item_type cscfg_features_type = { + .ct_owner = THIS_MODULE, +}; + +static struct config_group cscfg_features_grp = { + .cg_item = { + .ci_namebuf = "features", + .ci_type = &cscfg_features_type, + }, +}; + +/* add feature to features group */ +int cscfg_configfs_add_feature(struct cscfg_feature_desc *feat_desc) +{ + struct config_group *new_group; + int err; + + new_group = cscfg_create_feature_group(feat_desc); + if (IS_ERR(new_group)) + return PTR_ERR(new_group); + err = configfs_register_group(&cscfg_features_grp, new_group); + return err; +} + +int cscfg_configfs_init(struct cscfg_manager *cscfg_mgr) +{ + struct configfs_subsystem *subsys; + struct config_item_type *ci_type; + + if (!cscfg_mgr) + return -EINVAL; + + ci_type = cscfg_create_ci_type(); + if (!ci_type) + return -ENOMEM; + + subsys = &cscfg_mgr->cfgfs_subsys; + config_item_set_name(&subsys->su_group.cg_item, CSCFG_FS_SUBSYS_NAME); + subsys->su_group.cg_item.ci_type = ci_type; + + config_group_init(&subsys->su_group); + mutex_init(&subsys->su_mutex); + + /* Add default groups to subsystem */ + config_group_init(&cscfg_configs_grp); + configfs_add_default_group(&cscfg_configs_grp, &subsys->su_group); + + config_group_init(&cscfg_features_grp); + configfs_add_default_group(&cscfg_features_grp, &subsys->su_group); + + return configfs_register_subsystem(subsys); +} + +void cscfg_configfs_release(struct cscfg_manager *cscfg_mgr) +{ + configfs_unregister_subsystem(&cscfg_mgr->cfgfs_subsys); +} diff --git a/drivers/hwtracing/coresight/coresight-syscfg-configfs.h b/drivers/hwtracing/coresight/coresight-syscfg-configfs.h new file mode 100644 index 000000000000..7d6ffe35ca4c --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-syscfg-configfs.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Coresight system configuration driver - support for configfs. + */ + +#ifndef CORESIGHT_SYSCFG_CONFIGFS_H +#define CORESIGHT_SYSCFG_CONFIGFS_H + +#include <linux/configfs.h> +#include "coresight-syscfg.h" + +#define CSCFG_FS_SUBSYS_NAME "cs-syscfg" + +/* container for configuration view */ +struct cscfg_fs_config { + struct cscfg_config_desc *config_desc; + struct config_group group; +}; + +/* container for feature view */ +struct cscfg_fs_feature { + struct cscfg_feature_desc *feat_desc; + struct config_group group; +}; + +/* container for parameter view */ +struct cscfg_fs_param { + int param_idx; + struct cscfg_feature_desc *feat_desc; + struct config_group group; +}; + +/* container for preset view */ +struct cscfg_fs_preset { + int preset_num; + struct cscfg_config_desc *config_desc; + struct config_group group; +}; + +int cscfg_configfs_init(struct cscfg_manager *cscfg_mgr); +void cscfg_configfs_release(struct cscfg_manager *cscfg_mgr); +int cscfg_configfs_add_config(struct cscfg_config_desc *config_desc); +int cscfg_configfs_add_feature(struct cscfg_feature_desc *feat_desc); + +#endif /* CORESIGHT_SYSCFG_CONFIGFS_H */ diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index 41f742190639..180202402eb5 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -9,6 +9,7 @@ #include "coresight-config.h" #include "coresight-etm-perf.h" #include "coresight-syscfg.h" +#include "coresight-syscfg-configfs.h"
/* * cscfg_ API manages configurations and features for the entire coresight @@ -287,6 +288,72 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) return 0; }
+/* get a feature descriptor by name */ +const struct cscfg_feature_desc *cscfg_get_named_feat_desc(const char *name) +{ + const struct cscfg_feature_desc *feat_desc = NULL, *feat_desc_item; + + mutex_lock(&cscfg_mutex); + + list_for_each_entry(feat_desc_item, &cscfg_mgr->feat_desc_list, item) { + if (strcmp(feat_desc_item->name, name) == 0) { + feat_desc = feat_desc_item; + break; + } + } + + mutex_unlock(&cscfg_mutex); + return feat_desc; +} + +/* called with cscfg_mutex held */ +static struct cscfg_feature_csdev * +cscfg_csdev_get_feat_from_desc(struct coresight_device *csdev, + struct cscfg_feature_desc *feat_desc) +{ + struct cscfg_feature_csdev *feat_csdev; + + list_for_each_entry(feat_csdev, &csdev->feature_csdev_list, node) { + if (feat_csdev->feat_desc == feat_desc) + return feat_csdev; + } + return NULL; +} + +int cscfg_update_feat_param_val(struct cscfg_feature_desc *feat_desc, + int param_idx, u64 value) +{ + int err = 0; + struct cscfg_feature_csdev *feat_csdev; + struct cscfg_registered_csdev *csdev_item; + + mutex_lock(&cscfg_mutex); + + /* check if any config active & return busy */ + if (atomic_read(&cscfg_mgr->sys_active_cnt)) { + err = -EBUSY; + goto unlock_exit; + } + + /* set the value */ + if ((param_idx < 0) || (param_idx >= feat_desc->nr_params)) { + err = -EINVAL; + goto unlock_exit; + } + feat_desc->params_desc[param_idx].value = value; + + /* update loaded instances.*/ + list_for_each_entry(csdev_item, &cscfg_mgr->csdev_desc_list, item) { + feat_csdev = cscfg_csdev_get_feat_from_desc(csdev_item->csdev, feat_desc); + if (feat_csdev) + feat_csdev->params_csdev[param_idx].current_value = value; + } + +unlock_exit: + mutex_unlock(&cscfg_mutex); + return err; +} + /** * cscfg_load_config_sets - API function to load feature and config sets. * @@ -308,6 +375,8 @@ int cscfg_load_config_sets(struct cscfg_config_desc **config_descs, if (feat_descs) { while (feat_descs[i]) { err = cscfg_load_feat(feat_descs[i]); + if (!err) + err = cscfg_configfs_add_feature(feat_descs[i]); if (err) { pr_err("coresight-syscfg: Failed to load feature %s\n", feat_descs[i]->name); @@ -322,6 +391,8 @@ int cscfg_load_config_sets(struct cscfg_config_desc **config_descs, if (config_descs) { while (config_descs[i]) { err = cscfg_load_config(config_descs[i]); + if (!err) + err = cscfg_configfs_add_config(config_descs[i]); if (err) { pr_err("coresight-syscfg: Failed to load configuration %s\n", config_descs[i]->name); @@ -691,6 +762,7 @@ static void cscfg_clear_device(void) list_for_each_entry(cfg_desc, &cscfg_mgr->config_desc_list, item) { etm_perf_del_symlink_cscfg(cfg_desc); } + cscfg_configfs_release(cscfg_mgr); device_unregister(cscfg_device()); mutex_unlock(&cscfg_mutex); } @@ -704,6 +776,10 @@ int __init cscfg_init(void) if (err) return err;
+ err = cscfg_configfs_init(cscfg_mgr); + if (err) + goto exit_err; + INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); INIT_LIST_HEAD(&cscfg_mgr->config_desc_list); diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h index 7bb8c8e497ba..8d018efd6ead 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.h +++ b/drivers/hwtracing/coresight/coresight-syscfg.h @@ -6,6 +6,7 @@ #ifndef CORESIGHT_SYSCFG_H #define CORESIGHT_SYSCFG_H
+#include <linux/configfs.h> #include <linux/coresight.h> #include <linux/device.h>
@@ -25,6 +26,7 @@ * @feat_desc_list: List of feature descriptors to load into registered devices. * @config_desc_list: List of system configuration descriptors to load into registered devices. * @sys_active_cnt: Total number of active config descriptor references. + * @cfgfs_subsys: configfs subsystem used to manage configurations. */ struct cscfg_manager { struct device dev; @@ -32,6 +34,7 @@ struct cscfg_manager { struct list_head feat_desc_list; struct list_head config_desc_list; atomic_t sys_active_cnt; + struct configfs_subsystem cfgfs_subsys; };
/* get reference to dev in cscfg_manager */ @@ -57,6 +60,10 @@ struct cscfg_registered_csdev { int __init cscfg_init(void); void cscfg_exit(void); int cscfg_preload(void); +const struct cscfg_feature_desc *cscfg_get_named_feat_desc(const char *name); +int cscfg_update_feat_param_val(struct cscfg_feature_desc *feat_desc, + int param_idx, u64 value); +
/* syscfg manager external API */ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs,
Adds documentation for the CoreSight System configuration manager.
Cc: Jonathan Corbet corbet@lwn.net Cc: linux-doc@vger.kernel.org Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org --- .../trace/coresight/coresight-config.rst | 244 ++++++++++++++++++ Documentation/trace/coresight/coresight.rst | 16 ++ 2 files changed, 260 insertions(+) create mode 100644 Documentation/trace/coresight/coresight-config.rst
diff --git a/Documentation/trace/coresight/coresight-config.rst b/Documentation/trace/coresight/coresight-config.rst new file mode 100644 index 000000000000..a4e3ef295240 --- /dev/null +++ b/Documentation/trace/coresight/coresight-config.rst @@ -0,0 +1,244 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +CoreSight System Configuration Manager +====================================== + + :Author: Mike Leach mike.leach@linaro.org + :Date: October 2020 + +Introduction +============ + +The CoreSight System Configuration manager is an API that allows the +programming of the CoreSight system with pre-defined configurations that +can then be easily enabled from sysfs or perf. + +Many CoreSight components can be programmed in complex ways - especially ETMs. +In addition, components can interact across the CoreSight system, often via +the cross trigger components such as CTI and CTM. These system settings can +be defined and enabled as named configurations. + + +Basic Concepts +============== + +This section introduces the basic concepts of a CoreSight system configuration. + + +Features +-------- + +A feature is a named set of programming for a CoreSight device. The programming +is device dependent, and can be defined in terms of absolute register values, +resource usage and parameter values. + +The feature is defined using a descriptor. This descriptor is used to load onto +a matching device, either when the feature is loaded into the system, or when the +CoreSight device is registered with the configuration manager. + +The load process involves interpreting the descriptor into a set of register +accesses in the driver - the resource usage and parameter descriptions +translated into appropriate register accesses. This interpretation makes it easy +and efficient for the feature to be programmed onto the device when required. + +The feature will not be active on the device until the feature is enabled, and +the device itself is enabled. When the device is enabled then enabled features +will be programmed into the device hardware. + +A feature is enabled as part of a configuration being enabled on the system. + + +Parameter Value +~~~~~~~~~~~~~~~ + +A parameter value is a named value that may be set by the user prior to the +feature being enabled that can adjust the behaviour of the operation programmed +by the feature. + +For example, this could be a count value in a programmed operation that repeats +at a given rate. When the feature is enabled then the current value of the +parameter is used in programming the device. + +The feature descriptor defines a default value for a parameter, which is used +if the user does not supply a new value. + +Users can update parameter values using the configfs API for the CoreSight +system - which is described below. + +The current value of the parameter is loaded into the device when the feature +is enabled on that device. + + +Configurations +-------------- + +A configuration defines a set of features that are to be used in a trace +session where the configuration is selected. For any trace session only one +configuration may be selected. + +The features defined may be on any type of device that is registered +to support system configuration. A configuration may select features to be +enabled on a class of devices - i.e. any ETMv4, or specific devices, e.g. a +specific CTI on the system. + +As with the feature, a descriptor is used to define the configuration. +This will define the features that must be enabled as part of the configuration +as well as any preset values that can be used to override default parameter +values. + + +Preset Values +~~~~~~~~~~~~~ + +Preset values are easily selectable sets of parameter values for the features +that the configuration uses. The number of values in a single preset set, equals +the sum of parameter values in the features used by the configuration. + +e.g. a configuration consists of 3 features, one has 2 parameters, one has +a single parameter, and another has no parameters. A single preset set will +therefore have 3 values. + +Presets are optionally defined by the configuration, up to 15 can be defined. +If no preset is selected, then the parameter values defined in the feature +are used as normal. + + +Operation +~~~~~~~~~ + +The following steps take place in the operation of a configuration. + +1) In this example, the configuration is 'autofdo', which has an + associated feature 'strobing' that works on ETMv4 CoreSight Devices. + +2) The configuration is enabled. For example 'perf' may select the + configuration as part of its command line:: + + perf record -e cs_etm/autofdo/ myapp + + which will enable the 'autofdo' configuration. + +3) perf starts tracing on the system. As each ETMv4 that perf uses for + trace is enabled, the configuration manager will check if the ETMv4 + has a feature that relates to the currently active configuration. + In this case 'strobing' is enabled & programmed into the ETMv4. + +4) When the ETMv4 is disabled, any registers marked as needing to be + saved will be read back. + +5) At the end of the perf session, the configuration will be disabled. + + +Viewing Configurations and Features +=================================== + +The set of configurations and features that are currently loaded into the +system can be viewed using the configfs API. + +Mount configfs as normal and the 'cs-syscfg' subsystem will appear:: + + $ ls /config + cs-syscfg stp-policy + +This has two sub-directories:: + + $ cd cs-syscfg/ + $ ls + configurations features + +The system has the configuration 'autofdo' built in. It may be examined as +follows:: + + $ cd configurations/ + $ ls + autofdo + $ cd autofdo/ + $ ls + description preset1 preset3 preset5 preset7 preset9 + feature_refs preset2 preset4 preset6 preset8 + $ cat description + Setup ETMs with strobing for autofdo + $ cat feature_refs + strobing + +Each preset declared has a preset<n> subdirectory declared. The values for +the preset can be examined:: + + $ cat preset1/values + strobing.window = 0x1388 strobing.period = 0x2 + $ cat preset2/values + strobing.window = 0x1388 strobing.period = 0x4 + +The features referenced by the configuration can be examined in the features +directory:: + + $ cd ../../features/strobing/ + $ ls + description matches nr_params params + $ cat description + Generate periodic trace capture windows. + parameter 'window': a number of CPU cycles (W) + parameter 'period': trace enabled for W cycles every period x W cycles + $ cat matches + SRC_ETMV4 + $ cat nr_params + 2 + +Move to the params directory to examine and adjust parameters:: + + cd params + $ ls + period window + $ cd period + $ ls + value + $ cat value + 0x2710 + # echo 15000 > value + # cat value + 0x3a98 + +Parameters adjusted in this way are reflected in all device instances that have +loaded the feature. + + +Using Configurations in perf +============================ + +The configurations loaded into the CoreSight configuration management are +also declared in the perf 'cs_etm' event infrastructure so that they can +be selected when running trace under perf:: + + $ ls /sys/devices/cs_etm + configurations format perf_event_mux_interval_ms sinks type + events nr_addr_filters power + +Key directories here are 'configurations' - which lists the loaded +configurations, and 'events' - a generic perf directory which allows +selection on the perf command line.:: + + $ ls configurations/ + autofdo + $ cat configurations/autofdo + 0xa7c3dddd + +As with the sinks entries, this provides a hash of the configuration name. +The entry in the 'events' directory uses perfs built in syntax generator +to substitute the syntax for the name when evaluating the command:: + + $ ls events/ + autofdo + $ cat events/autofdo + configid=0xa7c3dddd + +The 'autofdo' configuration may be selected on the perf command line:: + + $ perf record -e cs_etm/autofdo/u --per-thread <application> + +A preset to override the current parameter values can also be selected:: + + $ perf record -e cs_etm/autofdo,preset=1/u --per-thread <application> + +When configurations are selected in this way, then the trace sink used is +automatically selected. diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index 169749efd8d1..7ec656c9f0dc 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -619,6 +619,20 @@ A separate documentation file is provided to explain the use of these devices. (:doc:`coresight-ect`) [#fourth]_.
+CoreSight System Configuration +------------------------------ + +CoreSight components can be complex devices with many programming options. +Furthermore, components can be programmed to interact with each other across the +complete system. + +A CoreSight System Configuration manager is provided to allow these complex programming +configurations to be selected and used easily from perf and sysfs. + +See the separate document for further information. +(:doc:`coresight-config`) [#fifth]_. + + .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
.. [#second] Documentation/trace/stm.rst @@ -626,3 +640,5 @@ A separate documentation file is provided to explain the use of these devices. .. [#third] https://github.com/Linaro/perf-opencsd
.. [#fourth] Documentation/trace/coresight/coresight-ect.rst + +.. [#fifth] Documentation/trace/coresight/coresight-config.rst
[...]
Mike Leach (10): coresight: syscfg: Initial coresight system configuration coresight: syscfg: Add registration and feature loading for cs devices coresight: config: Add configuration and feature generic functions coresight: etm-perf: update to handle configuration selection coresight: syscfg: Add API to activate and enable configurations coresight: etm-perf: Update to activate selected configuration coresight: etm4x: Add complex configuration handlers to etmv4 coresight: config: Add preloaded configurations coresight: syscfg: Add initial configfs support Documentation: coresight: Add documentation for CoreSight config
.../trace/coresight/coresight-config.rst | 244 ++++++ Documentation/trace/coresight/coresight.rst | 16 + drivers/hwtracing/coresight/Makefile | 7 +- .../hwtracing/coresight/coresight-cfg-afdo.c | 153 ++++ .../coresight/coresight-cfg-preload.c | 31 + .../coresight/coresight-cfg-preload.h | 13 + .../hwtracing/coresight/coresight-config.c | 275 ++++++ .../hwtracing/coresight/coresight-config.h | 253 ++++++ drivers/hwtracing/coresight/coresight-core.c | 12 +- .../hwtracing/coresight/coresight-etm-perf.c | 150 +++- .../hwtracing/coresight/coresight-etm-perf.h | 12 +- .../hwtracing/coresight/coresight-etm4x-cfg.c | 182 ++++ .../hwtracing/coresight/coresight-etm4x-cfg.h | 30 + .../coresight/coresight-etm4x-core.c | 38 +- .../coresight/coresight-etm4x-sysfs.c | 3 + .../coresight/coresight-syscfg-configfs.c | 396 +++++++++ .../coresight/coresight-syscfg-configfs.h | 45 + .../hwtracing/coresight/coresight-syscfg.c | 804 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 81 ++ include/linux/coresight.h | 7 + 20 files changed, 2716 insertions(+), 36 deletions(-) create mode 100644 Documentation/trace/coresight/coresight-config.rst create mode 100644 drivers/hwtracing/coresight/coresight-cfg-afdo.c create mode 100644 drivers/hwtracing/coresight/coresight-cfg-preload.c create mode 100644 drivers/hwtracing/coresight/coresight-cfg-preload.h create mode 100644 drivers/hwtracing/coresight/coresight-config.c create mode 100644 drivers/hwtracing/coresight/coresight-config.h create mode 100644 drivers/hwtracing/coresight/coresight-etm4x-cfg.c create mode 100644 drivers/hwtracing/coresight/coresight-etm4x-cfg.h create mode 100644 drivers/hwtracing/coresight/coresight-syscfg-configfs.c create mode 100644 drivers/hwtracing/coresight/coresight-syscfg-configfs.h create mode 100644 drivers/hwtracing/coresight/coresight-syscfg.c create mode 100644 drivers/hwtracing/coresight/coresight-syscfg.h
I have added this set to next-ETE-TRBE where it will be rebased to v5.13-rc1 when it comes out.
Thanks, Mathieu
-- 2.17.1