OpenEmbedded

openembedded@lists.linaro.org

106 discussions

[thud][PATCH 0/6] Cleanup of Arm toolchain backport to thud

by Denys Dmytriyenko

From: Denys Dmytriyenko <denys(a)ti.com> When backporting Arm toolchain from master to thud, several commits were missed, as well as one addition of crosssdk-inital recipe was missing. This series addresses those issues. Denys Dmytriyenko (2): gcc-crosssdk-initial: add missing arm-8.2 version tcmode-external-arm: uncomment preference for virtual/${TARGET_PREFIX}binutils Koen Kooi (4): tcmode-external-arm.inc: fix some ELT⇒ EAT conversions that were missed previously tcmode-external-arm.inc: prefer virtual/libc-locale = external-arm-toolchain tcmode-external-arm.inc: set glibc override tcmode-external-arm.inc: add 'libc-locales libc-locale-code libc-charsets' to DISTRO_FEATURES_LIBC .../conf/distro/include/tcmode-external-arm.inc | 18 ++++++++++-------- .../gcc/gcc-crosssdk-initial_arm-8.2.bb | 3 +++ 2 files changed, 13 insertions(+), 8 deletions(-) create mode 100644 meta-linaro-toolchain/recipes-devtools/gcc/gcc-crosssdk-initial_arm-8.2.bb -- 2.7.4

6 years, 3 months

Re: meta-linaro-toolchain: Set PV on glibc_linaro

by Denys Dmytriyenko

On Fri, Mar 15, 2019 at 05:16:06PM -0600, Anibal Limon wrote: > I sent a review request, > > https://review.linaro.org/c/openembedded/meta-linaro/+/30779 Any updates? I'm still getting a lot of warnings during parsing, e.g.: WARNING: .../meta-linaro/meta-linaro-toolchain/recipes-core/glibc/glibc_linaro-2.20.bb: Unable to get checksum for glibc SRC_URI entry ld.so.conf: file could not be found WARNING: .../meta-linaro/meta-linaro-toolchain/recipes-core/glibc/glibc_linaro-2.20.bb: Unable to get checksum for glibc SRC_URI entry 0022-Add-ILP32-to-makefiles.patch: file could not be found Denys > On Fri, 15 Mar 2019 at 14:46, Anibal Limon <anibal.limon(a)linaro.org> wrote: > > > > > > > On Fri, Mar 15, 2019, 1:54 PM Denys Dmytriyenko <denis(a)denix.org> wrote: > > > >> On Fri, Mar 15, 2019 at 09:55:21AM -0600, Anibal Limon wrote: > >> > Hi Denys, > >> > > >> > I'm not see a PV set on glibc_linaro-2.20.bb, there is a PV set on gcc > >> > recipes with linaro-2.20. > >> > >> As my previous email states - PV is set by the filename. Moreover, you > >> are > >> erroneously referrring to the recipe as "glibc_linaro", while it's > >> "glibc" > >> instead. And "linaro-2.20" is actually recipe's PV. The underscore in the > >> filename separates recipe name from recipe version. From the manual: > >> > >> > >> https://www.yoctoproject.org/docs/1.6/bitbake-user-manual/bitbake-user-manu… > >> > >> | In this example, a recipe called "something_1.2.3.bb" sets PN to > >> "something" > >> | and PV to "1.2.3". > >> > >> Hence, in this case, glibc_linaro-2.20.bb used to set PN to "glibc" and > >> PV to > >> "linaro-2.20". And it used to work for years. > >> > >> Moreover, since ${FILESPATH} below expects ${FILE_DIRNAME}/glibc-${PV} > >> and > >> there's "glibc-linaro-2.20" directory with whole bunch of patches: > >> > >> https://git.linaro.org/openembedded/meta-linaro.git/tree/meta-linaro-toolch… > >> > >> So, with your change, it would instead try to look into "glibc-2.20" and > >> fail > >> to find any patches. Not even sure how it was tested... > >> > > > > You are right, I not see the error because I'm using upstream glibc (2.29) > > and the build didn't fail. > > > > I will update the PV in the common file. > > > > Regards, > > Anibal > > > > > >> -- > >> Denys > >> > >> > >> > ... > >> > $ git grep PV . > >> > glibc-linaro-2.20/eglibc-ppc8xx-cache-line-workaround.patch:+ reads > >> from > >> > the PVR register. */ > >> > glibc-linaro-2.20/eglibc-ppc8xx-cache-line-workaround.patch:+ > >> emulates > >> > PowerPC mfspr reads from the PVR register. */ > >> > glibc_linaro-2.20.bb:SRC_URI = " > >> > > >> http://releases.linaro.org/archive/${MMYY}/components/toolchain/glibc-linar… > >> > \ > >> > glibc_linaro-2.20.bb:S = "${WORKDIR}/glibc-${PV}-${RELEASE}" > >> > glibc_linaro-2.20.bb:FILESPATH = "${@base_set_filespath([ > >> > '${FILE_DIRNAME}/glibc-${PV}', '${FILE_DIRNAME}/glibc', > >> > '${FILE_DIRNAME}/files', '${FILE_DIRNAME}' ], d)}" > >> > glibc_linaro.inc:PV = "2.20" > >> > ... > >> > > >> > What is the error that you have noticed? > >> > > >> > Regards, > >> > Anibal > >> > > >> > On Fri, 8 Mar 2019 at 14:32, Denys Dmytriyenko <denis(a)denix.org> wrote: > >> > > >> > > > >> > > > >> https://git.linaro.org/openembedded/meta-linaro.git/commit/?id=768925270cc2… > >> > > > >> > > meta-linaro-toolchain: Set PV on glibc_linaro > >> > > Recently a common file was introudced to set PV for glibc [1] > >> > > in oe-core causing failures becuase glibc_linaro is trying > >> > > to download the latest oe-core version (2.29). > >> > > > >> > > [1] > >> https://git.openembedded.org/openembedded-core/commit/?id=41093cb6c6 > >> > > > >> > > Change-Id: I5c99c25a953f00a64614046ba40e578795553bc1 > >> > > Signed-off-by: Aníbal Limón <anibal.limon(a)linaro.org> > >> > > > >> > > > >> > > The problem is that all those modified recipes already had PV set in > >> their > >> > > filename and it was "linaro-2.20", not just "2.20". > > > > > > > >> > > -- > >> > > Denys > >> > > > >> > >

6 years, 3 months

Re: meta-linaro-toolchain: Set PV on glibc_linaro

by Denys Dmytriyenko

On Fri, Mar 15, 2019 at 09:55:21AM -0600, Anibal Limon wrote: > Hi Denys, > > I'm not see a PV set on glibc_linaro-2.20.bb, there is a PV set on gcc > recipes with linaro-2.20. As my previous email states - PV is set by the filename. Moreover, you are erroneously referrring to the recipe as "glibc_linaro", while it's "glibc" instead. And "linaro-2.20" is actually recipe's PV. The underscore in the filename separates recipe name from recipe version. From the manual: https://www.yoctoproject.org/docs/1.6/bitbake-user-manual/bitbake-user-manu… | In this example, a recipe called "something_1.2.3.bb" sets PN to "something" | and PV to "1.2.3". Hence, in this case, glibc_linaro-2.20.bb used to set PN to "glibc" and PV to "linaro-2.20". And it used to work for years. Moreover, since ${FILESPATH} below expects ${FILE_DIRNAME}/glibc-${PV} and there's "glibc-linaro-2.20" directory with whole bunch of patches: https://git.linaro.org/openembedded/meta-linaro.git/tree/meta-linaro-toolch… So, with your change, it would instead try to look into "glibc-2.20" and fail to find any patches. Not even sure how it was tested... -- Denys > ... > $ git grep PV . > glibc-linaro-2.20/eglibc-ppc8xx-cache-line-workaround.patch:+ reads from > the PVR register. */ > glibc-linaro-2.20/eglibc-ppc8xx-cache-line-workaround.patch:+ emulates > PowerPC mfspr reads from the PVR register. */ > glibc_linaro-2.20.bb:SRC_URI = " > http://releases.linaro.org/archive/${MMYY}/components/toolchain/glibc-linar… > \ > glibc_linaro-2.20.bb:S = "${WORKDIR}/glibc-${PV}-${RELEASE}" > glibc_linaro-2.20.bb:FILESPATH = "${@base_set_filespath([ > '${FILE_DIRNAME}/glibc-${PV}', '${FILE_DIRNAME}/glibc', > '${FILE_DIRNAME}/files', '${FILE_DIRNAME}' ], d)}" > glibc_linaro.inc:PV = "2.20" > ... > > What is the error that you have noticed? > > Regards, > Anibal > > On Fri, 8 Mar 2019 at 14:32, Denys Dmytriyenko <denis(a)denix.org> wrote: > > > > > https://git.linaro.org/openembedded/meta-linaro.git/commit/?id=768925270cc2… > > > > meta-linaro-toolchain: Set PV on glibc_linaro > > Recently a common file was introudced to set PV for glibc [1] > > in oe-core causing failures becuase glibc_linaro is trying > > to download the latest oe-core version (2.29). > > > > [1] https://git.openembedded.org/openembedded-core/commit/?id=41093cb6c6 > > > > Change-Id: I5c99c25a953f00a64614046ba40e578795553bc1 > > Signed-off-by: Aníbal Limón <anibal.limon(a)linaro.org> > > > > > > The problem is that all those modified recipes already had PV set in their > > filename and it was "linaro-2.20", not just "2.20". > > > > -- > > Denys > >

6 years, 3 months

Re: meta-linaro-toolchain: Set PV on glibc_linaro

by Denys Dmytriyenko

https://git.linaro.org/openembedded/meta-linaro.git/commit/?id=768925270cc2… meta-linaro-toolchain: Set PV on glibc_linaro Recently a common file was introudced to set PV for glibc [1] in oe-core causing failures becuase glibc_linaro is trying to download the latest oe-core version (2.29). [1] https://git.openembedded.org/openembedded-core/commit/?id=41093cb6c6 Change-Id: I5c99c25a953f00a64614046ba40e578795553bc1 Signed-off-by: Aníbal Limón <anibal.limon(a)linaro.org> The problem is that all those modified recipes already had PV set in their filename and it was "linaro-2.20", not just "2.20". -- Denys

6 years, 3 months

[PATCH 00/15] external-arm-toolchain fixes

by Diego Buffa

Hi all, I tried the new external-arm feature. I had a problem in building gdb-7.8, attached the patch I used to solve the problem,an in the following the patch for the layer, but anyway why gdb-7.8 is still used in the master branch? why do not upgrade to a newer version? Regards, d. diff --git a/meta-linaro-toolchain/recipes-devtools/gdb/gdb_linaro-7.8.bb b/meta-linaro-toolchain/recipes-devtools/gdb/gdb_linaro-7.8.bb index 630d43c..841b1ed 100644 --- a/meta-linaro-toolchain/recipes-devtools/gdb/gdb_linaro-7.8.bb +++ b/meta-linaro-toolchain/recipes-devtools/gdb/gdb_linaro-7.8.bb @@ -6,6 +6,8 @@ inherit python-dir PACKAGECONFIG ??= "" PACKAGECONFIG[python] = "--with-python=${WORKDIR}/python,--without-python,python" +SRC_URI += "file://0001-Fix-compilation-external-gcc-arm-8.2-2018.11.patch" + do_configure_prepend() { if [ -n "${(a)bb.utils.contains('PACKAGECONFIG', 'python', 'python', '', d)}" ]; then cat > ${WORKDIR}/python << EOF

6 years, 4 months

[PATCH 00/15] external-arm-toolchain fixes

by Denys Dmytriyenko

From: Denys Dmytriyenko <denys(a)ti.com> Fixes for the recently introduced external ARM toolchain support. Denys Dmytriyenko (15): tcmode-external-arm: use correct EAT_ prefix instead of ELT_ for TARGET_SYS external-arm-toolchain: also support 32-bit arm toolchains tcmode-external-arm: uncomment preference for virtual/${TARGET_PREFIX}binutils external-arm-toolchain: package header files into linux-libc-headers-dev external-arm-toolchain: libgcc_s.so in base_libdir is not a symlink, but a linker script external-arm-toolchain: package c++ headers external-arm-toolchain: some packages rdepend on ldd, so allow creating empty package external-arm-toolchain: fix host contamination QA issue external-arm-toolchain: switch from ${COREBASE}/LICENSE to ${COMMON_LICENSE_DIR}/MIT external-arm-toolchain: libasan/libubsan bump major version number external-arm-toolchain: libcidn is no longer packaged external-arm-toolchain: libnsl was split off of glibc and is a separate package now external-arm-toolchain: rpcsvc/rquota.* headers are now provided by separate quota package external-arm-toolchain: also provide virtual/libc-locale external-arm-toolchain: also set proper RPROVIDES for glibc-staticdev .../include/external-arm-toolchain-versions.inc | 8 +-- .../conf/distro/include/tcmode-external-arm.inc | 17 +++-- .../external-arm-toolchain.bb | 76 ++++++++++++---------- 3 files changed, 56 insertions(+), 45 deletions(-) -- 2.7.4

6 years, 4 months

[PATCH] added support for external-linaro-toolchain v7.3.1

by Diego Buffa

Hi, I replicate most of the stuff from https://github.com/openembedded/openembedded-core/tree/master/meta/recipes-… but I was not able to find a better solution. Regards, d. Signed-off-by: Diego Buffa <diego.buffa(a)gmail.com> --- .../include/external-linaro-toolchain-versions.inc | 3 + .../external-linaro-toolchain.bb | 6 +- .../external-linaro-toolchain/files/makedbs.sh | 177 ++++++++++++++++ .../glibc-linaro-package.inc | 232 +++++++++++++++++++++ 4 files changed, 416 insertions(+), 2 deletions(-) create mode 100755 meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/files/makedbs.sh create mode 100644 meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/glibc-linaro-package.inc diff --git a/meta-linaro-toolchain/conf/distro/include/external-linaro-toolchain-versions.inc b/meta-linaro-toolchain/conf/distro/include/external-linaro-toolchain-versions.inc index 2a99209..1f82052 100644 --- a/meta-linaro-toolchain/conf/distro/include/external-linaro-toolchain-versions.inc +++ b/meta-linaro-toolchain/conf/distro/include/external-linaro-toolchain-versions.inc @@ -37,6 +37,9 @@ def elt_get_main_version(d): if version.split()[5] == '(crosstool-NG': # gcc version 4.9.1 20140529 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.08 - Linaro GCC 4.9-2014.08) return version.split()[6].split('-')[3] + if version.split()[7] == '(Linaro': + # gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) + return version.split()[9].split(')')[0] bb.error('Failed to parse external Linaro toolchain version from: %s' % version) else: return version diff --git a/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/external-linaro-toolchain.bb b/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/external-linaro-toolchain.bb index e0fb3eb..4382806 100644 --- a/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/external-linaro-toolchain.bb +++ b/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/external-linaro-toolchain.bb @@ -1,4 +1,4 @@ -require recipes-core/glibc/glibc-package.inc +require glibc-linaro-package.inc INHIBIT_DEFAULT_DEPS = "1" INHIBIT_PACKAGE_STRIP = "1" @@ -54,7 +54,9 @@ PROVIDES += "\ PV = "${ELT_VER_MAIN}" # https://launchpad.net/linaro-toolchain-binaries -SRC_URI = "file://SUPPORTED" +SRC_URI = "file://SUPPORTED \ + file://makedbs.sh \ +" do_install() { # Add stubs for files OE-core expects diff --git a/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/files/makedbs.sh b/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/files/makedbs.sh new file mode 100755 index 0000000..7d51a67 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/files/makedbs.sh @@ -0,0 +1,177 @@ +#!/bin/sh + +# +# Make passwd.db, group.db, etc. +# + +VAR_DB=/var/db + +# Use make if available +if [ -x /usr/bin/make -o -x /bin/make ]; then + make -C $VAR_DB + exit 0 +fi + +# No make available, do it in hard way + +# passwd.db +if [ -e /etc/passwd ]; then +target=$VAR_DB/passwd.db +echo -n "passwd... " +awk 'BEGIN { FS=":"; OFS=":" } \ + /^[ \t]*$$/ { next } \ + /^[ \t]*#/ { next } \ + /^[^#]/ { printf ".%s ", $$1; print; \ + printf "=%s ", $$3; print }' /etc/passwd | \ +makedb --quiet -o $target - +echo "done." +fi + +# group.db +if [ -e /etc/group ]; then +target=$VAR_DB/group.db +echo -n "group... " +awk 'BEGIN { FS=":"; OFS=":" } \ + /^[ \t]*$$/ { next } \ + /^[ \t]*#/ { next } \ + /^[^#]/ { printf ".%s ", $$1; print; \ + printf "=%s ", $$3; print; \ + if ($$4 != "") { \ + split($$4, grmems, ","); \ + for (memidx in grmems) { \ + mem=grmems[memidx]; \ + if (members[mem] == "") \ + members[mem]=$$3; \ + else \ + members[mem]=members[mem] "," $$3; \ + } \ + delete grmems; } } \ + END { for (mem in members) \ + printf ":%s %s %s\n", mem, mem, members[mem]; }' /etc/group | \ +makedb --quiet -o $target - +echo "done." +fi + +# ethers.db +if [ -e /etc/ethers ]; then +target=$VAR_DB/ethers.db +echo -n "ethers... " +awk '/^[ \t]*$$/ { next } \ + /^[ \t]*#/ { next } \ + /^[^#]/ { printf ".%s ", $$1; print; \ + printf "=%s ", $$2; print }' /etc/ethers | \ +makedb --quiet -o $target - +echo "done." +fi + +# protocols.db +if [ -e /etc/protocols ]; then +target=$VAR_DB/protocols.db +echo -n "protocols... " +awk '/^[ \t]*$$/ { next } \ + /^[ \t]*#/ { next } \ + /^[^#]/ { printf ".%s ", $$1; print; \ + printf "=%s ", $$2; print; \ + for (i = 3; i <= NF && !($$i ~ /^#/); ++i) \ + { printf ".%s ", $$i; print } }' /etc/protocols | \ +makedb --quiet -o $target - +echo "done." +fi + +# rpc.db +if [ -e /etc/rpc ]; then +target=$VAR_DB/rpc.db +echo -n "rpc... " +awk '/^[ \t]*$$/ { next } \ + /^[ \t]*#/ { next } \ + /^[^#]/ { printf ".%s ", $$1; print; \ + printf "=%s ", $$2; print; \ + for (i = 3; i <= NF && !($$i ~ /^#/); ++i) \ + { printf ".%s ", $$i; print } }' /etc/rpc | \ +makedb --quiet -o $target - +echo "done." +fi + +# services.db +if [ -e /etc/services ]; then +target=$VAR_DB/services.db +echo -n "services... " +awk 'BEGIN { FS="[ \t/]+" } \ + /^[ \t]*$$/ { next } \ + /^[ \t]*#/ { next } \ + /^[^#]/ { sub(/[ \t]*#.*$$/, "");\ + printf ":%s/%s ", $$1, $$3; print; \ + printf ":%s/ ", $$1; print; \ + printf "=%s/%s ", $$2, $$3; print; \ + printf "=%s/ ", $$2; print; \ + for (i = 4; i <= NF && !($$i ~ /^#/); ++i) \ + { printf ":%s/%s ", $$i, $$3; print; \ + printf ":%s/ ", $$i; print } }' /etc/services | \ +makedb --quiet -o $target - +echo "done." +fi + +# shadow.db +if [ -e /etc/shadow ]; then +target=$VAR_DB/shadow.db +echo -n "shadow... " +awk 'BEGIN { FS=":"; OFS=":" } \ + /^[ \t]*$$/ { next } \ + /^[ \t]*#/ { next } \ + /^[^#]/ { printf ".%s ", $$1; print }' /etc/shadow | \ +(umask 077 && makedb --quiet -o $target -) +echo "done." +if chgrp shadow $target 2>/dev/null; then + chmod g+r $target +else + chown 0 $target; chgrp 0 $target; chmod 600 $target; + echo + echo "Warning: The shadow password database $target" + echo "has been set to be readable only by root. You may want" + echo "to make it readable by the \`shadow' group depending" + echo "on your configuration." + echo +fi +fi + +# gshadow.db +if [ -e /etc/gshadow ]; then +target=$VAR_DB/gshadow.db +echo -n "gshadow... " +awk 'BEGIN { FS=":"; OFS=":" } \ + /^[ \t]*$$/ { next } \ + /^[ \t]*#/ { next } \ + /^[^#]/ { printf ".%s ", $$1; print }' /etc/gshadow | \ +(umask 077 && makedb --quiet -o $target -) +echo "done." +if chgrp shadow $target 2>/dev/null; then + chmod g+r $target +else + chown 0 $target; chgrp 0 $target; chmod 600 $target + echo + echo "Warning: The shadow group database $target" + echo "has been set to be readable only by root. You may want" + echo "to make it readable by the \`shadow' group depending" + echo "on your configuration." + echo +fi +fi + +# netgroup.db +if [ -e /etc/netgroup ]; then +target=$VAR_DB/netgroup.db +echo -n "netgroup... " +awk 'BEGIN { ini=1 } \ + /^[ \t]*$$/ { next } \ + /^[ \t]*#/ { next } \ + /^[^#]/ { if (sub(/[ \t]*\\$$/, " ") == 0) end="\n"; \ + else end=""; \ + gsub(/[ \t]+/, " "); \ + sub(/^[ \t]*/, ""); \ + if (ini == 0) printf "%s%s", $$0, end; \ + else printf ".%s %s%s", $$1, $$0, end; \ + ini=end == "" ? 0 : 1; } \ + END { if (ini==0) printf "\n" }' /etc/netgroup | \ +makedb --quiet -o $target +echo "done." +fi diff --git a/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/glibc-linaro-package.inc b/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/glibc-linaro-package.inc new file mode 100644 index 0000000..afa3862 --- /dev/null +++ b/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/glibc-linaro-package.inc @@ -0,0 +1,232 @@ +INHIBIT_SYSROOT_STRIP = "1" + +PACKAGES = "${PN}-dbg catchsegv sln nscd ldd tzcode glibc-thread-db ${PN}-pic libcidn libmemusage libnss-db libsegfault ${PN}-pcprofile libsotruss ${PN} ${PN}-utils glibc-extra-nss ${PN}-dev ${PN}-staticdev ${PN}-doc" + +# The ld.so in this glibc supports the GNU_HASH +RPROVIDES_${PN} = "eglibc rtld(GNU_HASH)" +RPROVIDES_${PN}-utils = "eglibc-utils" +RPROVIDES_${PN}-mtrace = "eglibc-mtrace libc-mtrace" +RPROVIDES_${PN}-pic = "eglibc-pic" +RPROVIDES_${PN}-dev = "eglibc-dev libc6-dev virtual-libc-dev" +RPROVIDES_${PN}-staticdev = "eglibc-staticdev" +RPROVIDES_${PN}-doc = "eglibc-doc" +RPROVIDES_glibc-extra-nss = "eglibc-extra-nss" +RPROVIDES_glibc-thread-db = "eglibc-thread-db" +RPROVIDES_${PN}-pcprofile = "eglibc-pcprofile" +RPROVIDES_${PN}-dbg = "eglibc-dbg" +libc_baselibs = "${base_libdir}/libc.so.* ${base_libdir}/libc-*.so ${base_libdir}/libm*.so.* ${base_libdir}/libm-*.so ${base_libdir}/libmvec-*.so ${base_libdir}/ld*.so.* ${base_libdir}/ld-*.so ${base_libdir}/libpthread*.so.* ${base_libdir}/libpthread-*.so ${base_libdir}/libresolv*.so.* ${base_libdir}/libresolv-*.so ${base_libdir}/librt*.so.* ${base_libdir}/librt-*.so ${base_libdir}/libutil*.so.* ${base_libdir}/libutil-*.so ${base_libdir}/libnsl*.so.* ${base_libdir}/libnsl-*.so ${base_libdir}/libnss_files*.so.* ${base_libdir}/libnss_files-*.so ${base_libdir}/libnss_compat*.so.* ${base_libdir}/libnss_compat-*.so ${base_libdir}/libnss_dns*.so.* ${base_libdir}/libnss_dns-*.so ${base_libdir}/libdl*.so.* ${base_libdir}/libdl-*.so ${base_libdir}/libanl*.so.* ${base_libdir}/libanl-*.so ${base_libdir}/libBrokenLocale*.so.* ${base_libdir}/libBrokenLocale-*.so" +libc_baselibs_append_aarch64 = " /lib/ld-linux-aarch64*.so.1" +INSANE_SKIP_${PN}_append_aarch64 = " libdir" + +FILES_${PN} = "${libc_baselibs} ${libexecdir}/* ${base_sbindir}/ldconfig ${sysconfdir}/ld.so.conf" +FILES_ldd = "${bindir}/ldd" +FILES_libsegfault = "${base_libdir}/libSegFault*" +FILES_libcidn = "${base_libdir}/libcidn-*.so ${base_libdir}/libcidn.so.*" +FILES_libmemusage = "${base_libdir}/libmemusage.so" +FILES_libnss-db = "${base_libdir}/libnss_db.so.* ${base_libdir}/libnss_db-*.so ${localstatedir}/db/Makefile ${localstatedir}/db/makedbs.sh" +RDEPENDS_libnss-db = "${PN}-utils" +FILES_glibc-extra-nss = "${base_libdir}/libnss_*-*.so ${base_libdir}/libnss_*.so.*" +FILES_sln = "${base_sbindir}/sln" +FILES_${PN}-pic = "${libdir}/*_pic.a ${libdir}/*_pic.map ${libdir}/libc_pic/*.o" +FILES_libsotruss = "${libdir}/audit/sotruss-lib.so" +FILES_SOLIBSDEV = "${libdir}/lib*${SOLIBSDEV}" +FILES_${PN}-dev += "${libdir}/*_nonshared.a ${base_libdir}/*_nonshared.a ${base_libdir}/*.o ${datadir}/aclocal" +FILES_${PN}-staticdev += "${libdir}/*.a ${base_libdir}/*.a" +FILES_nscd = "${sbindir}/nscd* ${sysconfdir}/init.d/nscd ${systemd_unitdir}/system/nscd* ${sysconfdir}/tmpfiles.d/nscd.conf \ + ${sysconfdir}/nscd.conf ${sysconfdir}/default/volatiles/98_nscd ${localstatedir}/db/nscd" +FILES_${PN}-mtrace = "${bindir}/mtrace" +FILES_tzcode = "${bindir}/tzselect ${sbindir}/zic ${sbindir}/zdump" +FILES_${PN}-utils = "${bindir}/* ${sbindir}/*" +FILES_catchsegv = "${bindir}/catchsegv" +RDEPENDS_catchsegv = "libsegfault" +FILES_${PN}-pcprofile = "${base_libdir}/libpcprofile.so" +FILES_glibc-thread-db = "${base_libdir}/libthread_db.so.* ${base_libdir}/libthread_db-*.so" +RPROVIDES_${PN}-dev += "libc-dev" +RPROVIDES_${PN}-staticdev += "libc-staticdev" + +SUMMARY_sln = "The static ln" +DESCRIPTION_sln = "Similar to the 'ln' utility, but statically linked. sln is useful to make symbolic links to dynamic libraries if the dynamic linking system, for some reason, is not functional." +SUMMARY_nscd = "Name service cache daemon" +DESCRIPTION_nscd = "nscd, name service cache daemon, caches name service lookups for the passwd, group and hosts information. It can damatically improvide performance with remote, such as NIS or NIS+, name services." +SUMMARY_glibc-extra-nss = "hesiod, NIS and NIS+ nss libraries" +DESCRIPTION_glibc-extra-nss = "glibc: nis, nisplus and hesiod search services." +SUMMARY_ldd = "print shared library dependencies" +DESCRIPTION_ldd = "${bindir}/ldd prints shared library dependencies for each program or shared library specified on the command line." +SUMMARY_${PN}-utils = "Miscellaneous utilities provided by glibc" +DESCRIPTION_${PN}-utils = "Miscellaneous utilities including getconf, iconv, locale, gencat, ..." +DESCRIPTION_libsotruss = "Library to support sotruss which traces calls through PLTs" +DESCRIPTION_tzcode = "tzcode, timezone zoneinfo utils -- zic, zdump, tzselect" + +inherit libc-common multilib_header + +do_install_append () { + rm -f ${D}${sysconfdir}/localtime + + # remove empty glibc dir + if [ -d ${D}${libexecdir} ]; then + rmdir --ignore-fail-on-non-empty ${D}${libexecdir} + fi + + oe_multilib_header bits/syscall.h bits/long-double.h + + if [ -f ${D}${bindir}/mtrace ]; then + sed -i -e '1s,#!.*perl,#! ${USRBINPATH}/env perl,' -e '2s,exec.*perl,exec ${USRBINPATH}/env perl,' ${D}${bindir}/mtrace + fi + # Info dir listing isn't interesting at this point so remove it if it exists. + if [ -e "${D}${infodir}/dir" ]; then + rm -f ${D}${infodir}/dir + fi + + if ! ${(a)bb.utils.contains('DISTRO_FEATURES', 'ldconfig', 'true', 'false', d)}; then + # The distro doesn't want these files so let's not install them + rm -f ${D}${sysconfdir}/ld.so.conf + rm -f ${D}${base_sbindir}/ldconfig + # This directory will be empty now so remove it too. + # But check whether it exists first, since it won't for glibc-initial. + if [ -d ${D}${sysconfdir} ]; then + rmdir ${D}${sysconfdir} + fi + fi + + if echo ${PN}|grep -q "glibc-initial"; then + return + fi + + install -d ${D}${sysconfdir}/init.d + install -d ${D}${localstatedir}/db/nscd + install -m 0755 ${S}/nscd/nscd.init ${D}${sysconfdir}/init.d/nscd + install -m 0755 ${S}/nscd/nscd.conf ${D}${sysconfdir}/nscd.conf + install -m 0755 ${WORKDIR}/makedbs.sh ${D}${localstatedir}/db + sed -i "s%daemon%start-stop-daemon --start --exec%g" ${D}${sysconfdir}/init.d/nscd + sed -i "s|$enable-cache\t\+netgroup\t\+$yes|\1no|" ${D}${sysconfdir}/nscd.conf + + install -d ${D}${systemd_unitdir}/system + install -m 0644 ${S}/nscd/nscd.service ${D}${systemd_unitdir}/system/ + + if ${(a)bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then + install -d ${D}${sysconfdir}/tmpfiles.d + echo "d /run/nscd 755 root root -" \ + > ${D}${sysconfdir}/tmpfiles.d/nscd.conf + else + install -d ${D}${sysconfdir}/default/volatiles + echo "d root root 0755 /var/run/nscd none" \ + > ${D}${sysconfdir}/default/volatiles/98_nscd + fi +} + +do_install_append_aarch64 () { + if [ "${base_libdir}" != "${nonarch_base_libdir}" ]; then + # The aarch64 ABI says the dynamic linker -must- be /lib/ld-linux-aarch64[_be].so.1 + install -d ${D}${nonarch_base_libdir} + if [ -e ${D}${base_libdir}/ld-linux-aarch64.so.1 ]; then + ln -s ${(a)oe.path.relative('${nonarch_base_libdir}', '${base_libdir}')}/ld-linux-aarch64.so.1 \ + ${D}${nonarch_base_libdir}/ld-linux-aarch64.so.1 + elif [ -e ${D}${base_libdir}/ld-linux-aarch64_be.so.1 ]; then + ln -s ${(a)oe.path.relative('${nonarch_base_libdir}', '${base_libdir}')}/ld-linux-aarch64_be.so.1 \ + ${D}${nonarch_base_libdir}/ld-linux-aarch64_be.so.1 + fi + fi + do_install_armmultilib +} + +do_install_append_arm () { + do_install_armmultilib +} + +do_install_append_armeb () { + do_install_armmultilib +} + +do_install_armmultilib () { + oe_multilib_header bits/endian.h bits/fcntl.h bits/fenv.h bits/fp-fast.h bits/hwcap.h bits/ipc.h bits/link.h bits/wordsize.h + oe_multilib_header bits/local_lim.h bits/mman.h bits/msq.h bits/pthreadtypes.h bits/sem.h bits/semaphore.h bits/setjmp.h + oe_multilib_header bits/shm.h bits/sigstack.h bits/stat.h bits/statfs.h bits/typesizes.h + + oe_multilib_header fpu_control.h gnu/lib-names.h gnu/stubs.h ieee754.h + + oe_multilib_header sys/elf.h sys/procfs.h sys/ptrace.h sys/ucontext.h sys/user.h +} + + +LOCALESTASH = "${WORKDIR}/stashed-locale" +bashscripts = "mtrace sotruss xtrace" + +do_stash_locale () { + dest=${LOCALESTASH} + install -d ${dest}${base_libdir} ${dest}${bindir} ${dest}${libdir} ${dest}${datadir} + if [ "${base_libdir}" != "${libdir}" ]; then + cp -fpPR ${D}${base_libdir}/* ${dest}${base_libdir} + fi + if [ -e ${D}${bindir}/localedef ]; then + mv -f ${D}${bindir}/localedef ${dest}${bindir} + fi + if [ -e ${D}${libdir}/gconv ]; then + mv -f ${D}${libdir}/gconv ${dest}${libdir} + fi + if [ -e ${D}${exec_prefix}/lib ]; then + cp -fpPR ${D}${exec_prefix}/lib ${dest}${exec_prefix} + fi + if [ -e ${D}${datadir}/i18n ]; then + mv ${D}${datadir}/i18n ${dest}${datadir} + fi + cp -fpPR ${D}${datadir}/* ${dest}${datadir} + rm -rf ${D}${datadir}/locale/ + cp -fpPR ${WORKDIR}/SUPPORTED ${dest} + + target=${dest}/scripts + mkdir -p $target + for i in ${bashscripts}; do + if [ -f ${D}${bindir}/$i ]; then + cp ${D}${bindir}/$i $target/ + fi + done +} + +addtask do_stash_locale after do_install before do_populate_sysroot do_package +do_stash_locale[dirs] = "${B}" +do_stash_locale[cleandirs] = "${LOCALESTASH}" +SSTATETASKS += "do_stash_locale" +do_stash_locale[sstate-inputdirs] = "${LOCALESTASH}" +do_stash_locale[sstate-outputdirs] = "${COMPONENTS_DIR}/${PACKAGE_ARCH}/glibc-stash-locale" +do_stash_locale[sstate-fixmedir] = "${COMPONENTS_DIR}/${PACKAGE_ARCH}/glibc-stash-locale" + +python do_stash_locale_setscene () { + sstate_setscene(d) +} +addtask do_stash_locale_setscene + +do_poststash_install_cleanup () { + # Remove all files which do_stash_locale would remove (mv) + # since that task could have come from sstate and not get run. + for i in ${bashscripts}; do + rm -f ${D}${bindir}/$i + done + rm -f ${D}${bindir}/localedef + rm -rf ${D}${datadir}/i18n + rm -rf ${D}${libdir}/gconv + rm -rf ${D}/${localedir} + rm -rf ${D}${datadir}/locale + if [ "${libdir}" != "${exec_prefix}/lib" ]; then + if [ -d ${D}${exec_prefix}/lib ]; then + # error out if directory isn't empty + # this dir should only contain locale dir + # which has been deleted in the previous step + rmdir ${D}${exec_prefix}/lib + fi + fi +} +addtask do_poststash_install_cleanup after do_stash_locale do_install before do_populate_sysroot do_package + +pkg_postinst_nscd () { + if [ -z "$D" ]; then + if command -v systemd-tmpfiles >/dev/null; then + systemd-tmpfiles --create ${sysconfdir}/tmpfiles.d/nscd.conf + elif [ -e ${sysconfdir}/init.d/populate-volatile.sh ]; then + ${sysconfdir}/init.d/populate-volatile.sh update + fi + fi +} +CONFFILES_nscd="${sysconfdir}/nscd.conf" + +SYSTEMD_PACKAGES = "nscd" +SYSTEMD_SERVICE_nscd = "nscd.service" -- 2.11.0

6 years, 5 months

libxcrypt failure on master

by Daniel Díaz

Hello! This is the failure that Andrey reported: configure:3197: checking whether the C compiler works configure:3219: i686-linaro-linux-gcc -m32 -march=core2 -mtune=core2 -msse3 -mfpmath=sse --sysroot=/home/daniel.diaz/lkft-master/build-intel-core2-32/tmp-rpb-glibc/work/core2-32-linaro-linux/libxcrypt/4.4.1-r0/recipe-sysroot -I/home/daniel.diaz/lkft-master/build-intel-core2-32/tmp-rp b-glibc/work/core2-32-linaro-linux/libxcrypt/4.4.1-r0/recipe-sysroot/usr/include -Wno-error=missing-attributes -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/daniel.diaz/lkft-master/build-intel-core2-32/tmp-rpb-glibc/work/core2-32-linaro-linux/libxcrypt/4.4.1-r0= /usr/src/debug/libxcrypt/4.4.1-r0 -fdebug-prefix-map=/home/daniel.diaz/lkft-master/build-intel-core2-32/tmp-rpb-glibc/work/core2-32-linaro-linux/libxcrypt/4.4.1-r0/recipe-sysroot= -fdebug-prefix-map=/home/daniel.diaz/lkft-master/build-intel-core2-32/tmp-rpb-glibc/work/core2-32-linaro- linux/libxcrypt/4.4.1-r0/recipe-sysroot-native= -I/home/daniel.diaz/lkft-master/build-intel-core2-32/tmp-rpb-glibc/work/core2-32-linaro-linux/libxcrypt/4.4.1-r0/recipe-sysroot/usr/include -Wno-error=missing-attributes -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed conftest.c >&5 cc1: error: -Werror=missing-attributes: no option -Wmissing-attributes cc1: error: -Werror=missing-attributes: no option -Wmissing-attributes configure:3223: $? = 1 configure:3261: result: no configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "xcrypt" | #define PACKAGE_TARNAME "libxcrypt" | #define PACKAGE_VERSION "4.4.1" | #define PACKAGE_STRING "xcrypt 4.4.1" | #define PACKAGE_BUGREPORT "https://github.com/besser82/libxcrypt/issues" | #define PACKAGE_URL "https://github.com/besser82/libxcrypt" | #define PACKAGE "libxcrypt" | #define VERSION "4.4.1" | /* end confdefs.h. */ | | int | main () | { | | ; | return 0; | } configure:3266: error: in `/home/daniel.diaz/lkft-master/build-intel-core2-32/tmp-rpb-glibc/work/core2-32-linaro-linux/libxcrypt/4.4.1-r0/build': configure:3268: error: C compiler cannot create executables Greetings! Daniel Díaz daniel.diaz(a)linaro.org

6 years, 6 months

Future of external Linaro toolchain?

by Denys Dmytriyenko

Hi, Now that gcc8 is being released by ARM, what is the future of external Linaro toolchain recipes and support in meta-linaro? -- Denys

6 years, 7 months

OE RPB 'thud' builds

by Nicolas Dechesne

hi there, as discussed recently, we are starting to put together the thud builds for Linaro OE RPB. * The oe-rpb-manifest now has the 'thud' branch, see [1]. Some layers are still missing thud branch themselves, in which case we use master. * we created thud branches for all Linaro layers (meta-linaro, meta-backports, meta-rpb, meta-96boards, meta-qcom) * A new build was created on ci.linaro, see [2] , and is now enabled (which means it will trigger on any change on one of the thud branches we track) The first 2 builds failed during the weekend, but it was infrastructure issues, however we just got a new failure that is a valid failure.. see [3]. Looks like LTP fails to build. Daniel: is that something you can check and fix? cheers nico [1] https://github.com/96boards/oe-rpb-manifest/tree/thud [2] https://review.linaro.org/#/c/ci/job/configs/+/29110/ [3] https://ci.linaro.org/job/96boards-reference-platform-openembedded-thud/

6 years, 7 months

← Newer
1
2
3
4
5
6
7
8
...
11
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

OpenEmbedded