linaro-dev

linaro-dev@lists.linaro.org

4332 discussions

[PM] 09/03/2011 - Minutes for the Power Management WG weekly call

by Amit Kucheria

Hi All, The minutes of the power management weekly call can be found at : https://wiki.linaro.org/WorkingGroups/PowerManagement/Meetings/2011-03-09 Highlights: Discussion on Hotplug vs. scheduler tunable to hit retention Regards, Amit

15 years, 1 month

[REMINDER] Weekly Release Meeting 2011-03-10

by Jamie Bennett

Hi, The weekly Linaro Release Meeting will be held at 17:00 UTC tomorrow. The agenda for the meeting can be found at: https://wiki.linaro.org/Releases/WeeklyReleaseMeeting/2011-03-10 and previous action items were: * Mounir to investigate the status of the Panda display problem * Mounir to ask the kernel team to triage bugs at https://bugs.launchpad.net/linux-linaro If you have points to raise or bugs that need to be discussed please add them to the wiki page above. This meeting is for everyone to discuss issues that may affect the ability to showcase Linaro's efforts in the released images so please add anything to the agenda that you feel falls into this category. The agenda will change a little this week, we will have image reports for our target releases done by: * Ubuntu Desktop and others - Tom Gall * Linaro Android - Patrik Ryd (Jamie Bennett this week) The full agenda is: * Announcements - Jamie Bennett with time for others to announce * Action Item Review - Jamie Bennett chasing * Image Status - Tom Gall and Patrik Ryd * Bugs - Jamie Bennett chair, others discuss * Team release-related reports (any team-focused release topics) * Any Other Business (AOB) Regards, Jamie. -- Linaro Release Manager | Platform Project Manager

15 years, 1 month

[NOTES] Android Platform Team meeting 2011-03-09

by Jamie Bennett

Hi, The notes and actions for this weeks Android Platform Team meeting along with team activity reports are now available at: https://wiki.linaro.org/Platform/Android/Meetings/2011-03-09 = Actions Recorded = * jserv-- to produce a Blueprint at http://launchpad.net/linaro-android to capture pandroid fbdev investigations * patrikryd to confirm https://android-build.linaro.org/job/android-u8500href/ tarballs work and fix if necessary * jserv-- and jeremychang to split up Validation Blueprints * jserv-- and jeremychang to split up Linaro toolchain Blueprint * jserv-- and jeremychang to split up Linaro Evaluation Builds for Android Blueprint into board specific Blueprints * jeremychang to check with jstultz on the status of android_omap4_defconfig Regards, Jamie. -- Linaro Release Manager | Platform Project Manager

15 years, 1 month

[PATCH V3 0/5] Add MX51 basic DT support

by Jason Liu

From: Jason Liu <r64343(a)freescale.com> This patchset adds Freescale i.mx51 device tree support. This is based on git://git.secretlab.ca/git/linux-2.6 devicetree/test This patch has been tested on MX51 babbage board and can boot up succesfully to linux console with DT enabled. Grant, I think it's almost ready for you to merge it. V3: - prefix the property name with the vendor name as like: "fsl,has-rts-cts" and "fsl,irda-mode" - use the ttymxc0 as the console - add FEC support, nfs can be used now Jason Liu (5): arm/dt: add basic mx51 device tree support arm/dt: add very basic dts file for babbage board serial/imx: parse from device tree support net/fec: check id_entry pointer before using it net/fec: add device tree matching support arch/arm/boot/dts/babbage.dts | 110 +++++++++++++++++++++++++++++++ arch/arm/mach-mx5/Kconfig | 8 ++ arch/arm/mach-mx5/Makefile | 1 + arch/arm/mach-mx5/board-dt.c | 64 ++++++++++++++++++ arch/arm/mach-mx5/clock-mx51-mx53.c | 43 ++++++++++++- arch/arm/plat-mxc/include/mach/common.h | 1 + drivers/net/fec.c | 25 +++++-- drivers/tty/serial/imx.c | 79 +++++++++++++++++++--- 8 files changed, 314 insertions(+), 17 deletions(-) create mode 100644 arch/arm/boot/dts/babbage.dts create mode 100644 arch/arm/mach-mx5/board-dt.c

15 years, 1 month

Packaging Django applications and projects

by Zygmunt Krynickiu

Hi. This is my first post to this mailing list, and in fact to any Debian mailing list in general so I'd like to introduce myself first. To keep Your interest focused on the problem I moved this to the footer of this message. With that of the way here's the core topic: I'd like to define and document the recommended best practice of packaging Django 1.0+ (and especially 1.3) web applications and projects for Debian. I started this on the Debian wiki at http://wiki.debian.org/DjangoPackagingDraft The topics I want to cover are: * Packaging Django applications: - where to install code - where to install templates - where to install static files (as understood by http://docs.djangoproject.com/en/dev/howto/static-files/) - where to install documentation (if any) * Packaging Django projects: - where to install code (like urls, settings, etc) - where to install templates - how to do settings (debconf integration / configuration files / python module vs real config file?) - what to with web server integration (aka http://localhost/packagename vs do-it-yourself-after-installation) - how do to database configuration and integration (dbconfig-common?) There are some things I did not want to enforce because either there is no clear best method or I don't feel that the topic is relevant before specifying more fundamental pieces. In particular this includes: - Shipping web server configuration files so that application can work out of the box after installation. - Handling of project configuration (it's both executable code and administrator-oriented settings file) I started a demo native package (still work in progress, comments welcome) called django-hello that contains a simple django project with one application. I deliberately used django-staticfiles as that's how upcoming web applications will distribute their static files. The code is at lp:~zkrynicki/+junk/django_hello. There is an Ubuntu PPA with python-django-staticfiles package that is required at https://launchpad.net/~zkrynicki/+archive/lava). There are some compromises I needed to make though. This package is using python-support as I still need to target the current Ubuntu LTS release (lucid) where dh_python2 is not available. I'm more than happy to convert this package to dh_python2 assuming that the same rules can be applied in a backwards compatible manner to Lucid packages. That's it. I'd like to know what you think. About me: My name is Zygmunt Krynicki. I'm work in the Linaro Validation team and I'd like to start a process that will make the output of the Linaro Validation team available to Debian users. I'd like to maintain the packages we're making and learn to do those packages properly. Most of my work revolves around server-side technology, specifically around Django web applications. I did not find any strong guidelines on how to package Django web applications and projects for Debian. Therefore I decided that I'd like to contribute to Debian and help define and apply those guidelines to various Django applications as they become available. Best regards Zygmunt Krynicki PS: I cross-posted to linaro-dev to make sure people there that might be interested in this discussion can notice it and participate.

15 years, 1 month

Linaro V4l2 meeting

by Benjamin Gaignard

Hi all, on March 7th MM WG has organize a v4l2 meeting to collect ideas for next development cycle. you can found the minutes of meeting here: https://wiki.linaro.org/WorkingGroups/Middleware/Multimedia/2011-03-07-V4L2… mains outcomes: - investigate/improve the library between v4l2 and Android camera interface - work on memory allocators: pmem, UMP or hwmem - design a thin, easy IPC layer in kernel space - develop an OMX library on top of v4l2 v4l2 developers have demonstrated lot of interest on hwmem topic v4l2 is active on ISP/DSP/co-processors topic Benjamin

15 years, 1 month

[PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes

by Dave Martin

This set of patches, along with some other patches under discussion on alkml, should enable omap3 and omap4 kernels to be built with CONFIG_THUMB2_KERNEL. This patch set builds on recent cleanup done by the omap maintainers. At least some of this code definitely works, most features have been tested successfully. Further testing, especially of Thumb-2 behaviour, is still welcome. In particular, I still have no Ack/Tested-by on the following patches, so it would be great if anyone who has an opportunity to do a final review / re-test can do so. * ARM: omap3: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL * ARM: omap3: Thumb-2 compatibility for sram34xx.S * ARM: omap3: Thumb-2 compatibility for sleep34xx.S Seems to work with CONFIG_SMP_ON_UP and CONFIG_THUMB2_KERNEL enabled on Beagle xM A2 and Panda A1. Thanks also to Santosh Shilimkar and Kevin Hilman for their help with testing so far. v3: * make SMC instruction syntax more consistent * remove do_wfi() in favour of the generic wfi() macro v4: * revert to the OMAP-specific do_wfi() implementation, pending discussion of how generic macros can/should be provided v5: * use ARM for low-level code in mach-omap2/*34xx.S, for correct interoperation with non-Thumb-capable firmware. I've stripped the Acked/Tested-bys from the major patches to mach-omap2/*34xx.S, since the reversion to ARM constitutes a significant change -- I would be grateful if people could re- test / re-review if they have the chance. For best future compatibility, I've left the changes which avoid architecturally deprecated features. Details below. Cheers, Dave The patches can be found, along with a buildable working tree, in the following repo: git://git.linaro.org/people/dmart/linux-2.6-arm.git * arm/omap-thumb2: has the patches proposed here * arm/omap-thumb2+merged: additionally has some patches cherry- picked from other trees which are needed in order for the patches on arm/omap-thumb2 to work usefully. * dirty/arm/omap-thumb2+merged: buildable test tree, which adds 2 local patches to work around a toolchain bug. A working kernel config for this tree is here: http://people.linaro.org/~dmart/arm_omap-thumb2+v2_config : CONFIG_SMP_ON_UP=y CONFIG_THUMB2_KERNEL=y CONFIG_SERIAL_OMAP=y (to avoid garbage on xM; for Panda use console=ttyS2) (The config is derived from the linaro omap config and so turns on loads of modules -- don't feel you have to build them all...) Cherry-picked patches originated from Russell's devel tree and Tony Lindgren's omap-testing tree: http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm.git devel git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-testing This series also depends on one un-merged patch to generic-ise the wfi() macro: git://git.linaro.org/people/dmart/linux-2.6-arm.git arm/wfi-macro Dave Martin (5): ARM: omap4: Provide do_wfi() for Thumb-2 ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL ARM: omap3: Remove hand-encoded SMC instructions ARM: omap3: Thumb-2 compatibility for sram34xx.S ARM: omap3: Thumb-2 compatibility for sleep34xx.S arch/arm/mach-omap2/include/mach/omap4-common.h | 4 ++ arch/arm/mach-omap2/omap-headsmp.S | 2 +- arch/arm/mach-omap2/omap44xx-smc.S | 8 ++-- arch/arm/mach-omap2/sleep34xx.S | 62 ++++++++++++++++++---- arch/arm/mach-omap2/sram34xx.S | 36 ++++++++++--- 5 files changed, 87 insertions(+), 25 deletions(-)

15 years, 1 month

Linaro GDB 7.2 2011-03 released

by Michael Hope

The Linaro Toolchain Working Group is pleased to announce the release of Linaro GDB 7.2. Linaro GDB 7.2 2011.03-0 is the fourth release in the 7.2 series. Based off the latest GDB 7.2, it includes ARM-focused bug fixes and enhancements. Interesting changes include: * Hardware watchpoint support * Backtracing while in the Linux kernel trampoline frame Hardware watchpoints use the support built into ARM devices to watch for changes in values in memory with little performance impact. A 2.6.37 or later kernel is required. The source tarball is available at: https://launchpad.net/gdb-linaro/+milestone/7.2-2011.03-0 More information on Linaro GDB is available at: https://launchpad.net/gdb-linaro -- Michael

15 years, 1 month

Linaro GCC 4.5 and 4.6 2011-03 released

by Michael Hope

The Linaro Toolchain Working Group is pleased to announce the release of both Linaro GCC 4.5 and Linaro GCC 4.6. Linaro GCC 4.5 is the eighth release in the 4.5 series. Based off the latest GCC 4.5.2+svn170352, it includes many ARM-focused performance improvements and bug fixes. Interesting changes include: * Adds a new 'shrink wrap' optimisation * Improves performance by making better use of the LDM/STM instructions * Fixes a segfault crash in Qt applications (LP: #705689) * Fixes a mis-compilation in the SPEC2006 gromacs benchmark (LP: #693502) * Fixes to the NEON intrinsics exposed through a NEON test suite (LP: #710623, LP: #710652) * Fixes an internal compiler error when tuning for XSCALE (LP: #721021) * Fixes a problem with loading zero using a NEON conditional load (LP: #709453) Shrink wrapping is an optimisation that delays writing out the prologue until it is first needed. This helps functions that exit early by reducing the amount of data pushed out to memory. It is enabled by default at -O1 and can be disabled using '-fno-shrink-wrap'. Linaro GCC 4.6 is an alpha release of the upcoming 4.6 series, and is intended for distributions or integrators who wish to start packaging and testing the compiler early. Note that no changes were made to Linaro GCC 4.4. 4.4-2010.02-0 stays the current release. The source tarballs are available from: https://launchpad.net/gcc-linaro/+milestone/4.5-2011.03-0 and https://launchpad.net/gcc-linaro/+milestone/4.6-2011.03-0 Downloads are available from the Linaro GCC page on Launchpad: https://launchpad.net/gcc-linaro -- Michael

15 years, 1 month

PulseAudio buffer size comparison

by Kurt Taylor

Attached is a pdf with all the results of the buffer size testing on the Beagle C4 and Panda. I think this pretty much conclusively shows that increasing the buffer size when using timer based scheduling results in no improvement in cpu wakes per second. I also went back and tested alsa 1.0.24 in the audio stack to enable the recently added check for period disable. I appears that the beagle and panda do not have support, or it is not yet enabled in the driver. Does anyone know if these boards have the ability to turn off period wakes for the sound companion chips? Kurt Taylor (irc krtaylor)

15 years, 1 month

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev