linaro-dev

linaro-dev@lists.linaro.org

4332 discussions

[PATCH v2 0/6] add full platform dt clock support for mx51 babbage

by Shawn Guo

This patch set is to add full platform dt clock support for mx51 babbage, based on Grant's devicetree/test tree. All mx51 non-dt clocks in clock-mx51-mx53.c are translated to dt ones. Regards, Shawn Changes since v1: * unify the references to clocks that could be created statically and dynamically, so that we do not have to duplicate functions * use for_each_matching_node suggested by Grant to match clock creating functions * reserve 'data' of device_node structure and use new one 'clk' * change macro ALLOC_CLK_LOOKUP and ADD_CLK_LOOKUP to functions * fix codes that will break existing board support * use clock provider 'src-clock' and 'dep-clock' * fix up aips and spba node name to remove address info (suggestion given by Grant on Jason's patch) Shawn Guo (6): arm/dts: babbage: add all available clock nodes arm/mxc: add clk member 'rate' to ease dt fixed-clock support dt: add new member 'clk' into device_node arm/dt: mx51: dynamically add clocks per dt nodes arm/dt: mx5: change timer init function to dt clock way of/clock: eliminate function __of_clk_get_from_provider arch/arm/boot/dts/babbage.dts | 501 +++++++++++- arch/arm/mach-mx5/Makefile | 2 +- arch/arm/mach-mx5/board-dt.c | 9 +- arch/arm/mach-mx5/clock-dt.c | 52 -- arch/arm/mach-mx5/clock-mx51-mx53.c | 1433 +++++++++++++++++++++++++++++++- arch/arm/plat-mxc/include/mach/clock.h | 4 + drivers/of/clock.c | 23 +- include/linux/of.h | 1 + 8 files changed, 1913 insertions(+), 112 deletions(-)

15 years

help: Overo Problem with CONFIG_SMP=y and mpurate

by Andy Doan

I have an Overo Tide that is capable of running at 720Mhz. It defaults to 600Mhz, but the mpurate kernel command line argument allows it to overridden. The problem is that Linaro kernels (with the Linaro .config) always show 499.92 BogoMIPS in /proc/cpuinfo regardless of what I pass as the mpurate. I've discovered that by disabling CONFIG_SMP (Linaro defaults this to 'y') the problem goes away. I'm not sure how to go about fixing this, but its been noticed by the Gumstix mailing list that Linaro builds for Overo seem sluggish. Does anyone have any ideas what might cause this, or any ideas where I might start looking? FYI - the LP bug is: 739582 thanks, -andy

15 years

[PM] 31/03/2011 - Minutes for the Power Management WG weekly call

by Amit Kucheria

Hi All, The minutes of the power management weekly call can be found at : https://wiki.linaro.org/WorkingGroups/PowerManagement/Meetings/2011-03-31 Highlights: 11.11 planning: results of discussions with TSC Regards, Amit

15 years

[PATCH] arm/dt: Add basic device tree support for mx53 loco board

by Jason Liu

--- grant, uboot patches has been send to u-boot maillist Test OK on mx53 loco board Signed-off-by: Jason Liu <jason.hui(a)linaro.org> --- arch/arm/boot/dts/mx53-loco.dts | 30 ++++++++++++++++++++++++++++++ arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx53_loco.c | 5 +++++ 3 files changed, 36 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/mx53-loco.dts b/arch/arm/boot/dts/mx53-loco.dts new file mode 100644 index 0000000..7347456 --- /dev/null +++ b/arch/arm/boot/dts/mx53-loco.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +/ { + model = "Freescale i.MX53 LOCO"; + compatible = "fsl,mx53-loco"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + }; + + memory { + device_type = "memory"; + reg = <0x70000000 0x40000000>; + }; + + chosen { + }; +}; diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index aae51ee..a61e01e 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -167,6 +167,7 @@ config MACH_MX53_SMD config MACH_MX53_LOCO bool "Support MX53 LOCO platforms" select SOC_IMX53 + select MX5_DT_COMMON select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 0a18f8d..6ffc591 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -226,10 +226,15 @@ static struct sys_timer mx53_loco_timer = { .init = mx53_loco_timer_init, }; +static const char *mx53_loco_dt_match[] __initdata = { + "fsl,mx53-loco", + NULL +}; MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, .timer = &mx53_loco_timer, .init_machine = mx53_loco_board_init, + .dt_compat = mx53_loco_dt_match, MACHINE_END -- 1.7.1

15 years

[PATCH-Android] Patches to build Android using GCC 4.5/4.6.

by Sachin Kamat

Hi, The next set of patches will help in building Android source code out of the box using Linaro GCC 4.5/4.6 toolchains. The patches basically try to circumvent the build problem caused by stricter GCC 4.5/4.6. These patches are based on remotes/m/linaro_android_2.3.2 branch. Regards, Sachin

15 years

[PATCH] arm/dt: Add basic device tree support for genesi mx board

by Jason Liu

This patch add support for Genesi Efika MX Smarttop and Smartbook Signed-off-by: Jason Liu <jason.hui(a)linaro.org> --- Grant, uboot patch has been included in your uboot patchset. And mx51_efika build break, need pull in the patch to fix it http://git.pengutronix.de/?p=imx/linux-2.6.git;a=commitdiff; h=251290a6078cb88382344b3ee535ae8c6254c1b5 --- arch/arm/boot/dts/genesi-efikamx.dts | 30 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/genesi-efikasb.dts | 30 ++++++++++++++++++++++++++++++ arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx51_efikamx.c | 6 ++++++ arch/arm/mach-mx5/board-mx51_efikasb.c | 6 ++++++ 5 files changed, 73 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/genesi-efikamx.dts b/arch/arm/boot/dts/genesi-efikamx.dts new file mode 100644 index 0000000..eca9616 --- /dev/null +++ b/arch/arm/boot/dts/genesi-efikamx.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +/ { + model = "Genesi EfikaMX nettop"; + compatible = "genesi,efikamx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + }; + + memory { + device_type = "memory"; + reg = <0x90000000 0x20000000>; + }; + + chosen { + }; +}; diff --git a/arch/arm/boot/dts/genesi-efikasb.dts b/arch/arm/boot/dts/genesi-efikasb.dts new file mode 100644 index 0000000..fc60baf --- /dev/null +++ b/arch/arm/boot/dts/genesi-efikasb.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +/ { + model = "Genesi Efika Smartbook"; + compatible = "genesi,efikasb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + }; + + memory { + device_type = "memory"; + reg = <0x90000000 0x20000000>; + }; + + chosen { + }; +}; diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index a61e01e..8aba7ea 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -123,6 +123,7 @@ config MX5_DT_COMMON config MX51_EFIKA_COMMON bool select SOC_IMX51 + select MX5_DT_COMMON select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index acab191..1e9ed26 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -286,6 +286,11 @@ static struct sys_timer mx51_efikamx_timer = { .init = mx51_efikamx_timer_init, }; +static const char *mx51_efikamx_dt_match[] __initdata = { + "genesi,efikamx", + NULL +}; + MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") /* Maintainer: Amit Kucheria <amit.kucheria(a)linaro.org> */ .boot_params = MX51_PHYS_OFFSET + 0x100, @@ -294,4 +299,5 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") .init_irq = mx51_init_irq, .timer = &mx51_efikamx_timer, .init_machine = mx51_efikamx_init, + .dt_compat = mx51_efikamx_dt_match, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index db04ce8..6b80fce 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -273,6 +273,11 @@ static struct sys_timer mx51_efikasb_timer = { .init = mx51_efikasb_timer_init, }; +static const char *mx51_efikasb_dt_match[] __initdata = { + "genesi,efikasb", + NULL +}; + MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook") .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, @@ -280,4 +285,5 @@ MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook") .init_irq = mx51_init_irq, .init_machine = efikasb_board_init, .timer = &mx51_efikasb_timer, + .dt_compat = mx51_efikasb_dt_match, MACHINE_END -- 1.7.1

15 years

[REMINDER] Weekly Release meeting 2011-03-31

by Jamie Bennett

Hi, The weekly Linaro Release Meeting will be held at 16:00 UTC tomorrow (please note the change in time). The agenda for the meeting can be found at: https://wiki.linaro.org/Cycles/WeeklyReleaseMeeting/2011-03-31 and previous action items were: * JamieBennett to look into EDID support status If you have points to raise or bugs that need to be discussed please add them to the wiki page above. Regards, Jamie. -- Linaro Release Manager | Platform Project Manager

15 years

Re: [PATCH] toolchain/build: Fix Linaro Android toolchain linking fail with FDO

by Jim Huang

On 30 March 2011 14:05, Luse Cheng <luse(a)0xlab.org> wrote: > Hi, jserv > After the context (may depend on android version) and location of sysroot is > decided. > It's OK that enable --with-sysroot by default. Agree. Let's do that. :) Thanks, -jserv > 2011/3/29 Jim Huang <jim.huang(a)linaro.org> >> >> On 25 March 2011 11:19, Luse Cheng <luse(a)0xlab.org> wrote: >> > Add --with-sysroot to fix Linaro Android toolchain linking fail with FDO >> > --- >> > linaro-build.sh | 15 ++++++++++++++- >> > 1 files changed, 14 insertions(+), 1 deletions(-) >> >> hi Luse, >> >> It looks great. I will check in. >> >> However, do you think it is reasonable to enable --with-sysroot by >> default? (we can maintain sysroot somewhere at linaro.org.) Please >> consider the case when we would like to release Linaro edition of >> Android Toolchain. >> >> Regards, >> -jserv

15 years

Call for testing: Linaro 11.05 Beta Candidate

by Jamie Bennett

Hi, In preparation for the release of Linaro 11.05 Beta images on Thursday a suitable candidate has been selected for testing. If you have supported hardware, as found on: http://releases.linaro.org/platform/linaro-n/hwpacks/beta/ please help our initiative by testing the official Linaro Evaluation Build (LEB): Ubuntu Desktop: http://releases.linaro.org/platform/linaro-n/ubuntu-desktop/beta/ and our Developer images: Nano: http://releases.linaro.org/platform/linaro-n/nano/beta/ ALIP: http://releases.linaro.org/platform/linaro-n/alip/beta/ Developer Tools: http://releases.linaro.org/platform/linaro-n/developer/beta/ As a side note, hwpacks that have an -lt- in their name are outputs from the Linaro Landing teams, using some of their components. Make your way to: http://wiki.linaro.org/Releases/MilestoneBuilds for an explanation on how to test and submit your results to the QA tracker at: http://qatracker.linaro.org For an explanation of how to use the qatracker please see: https://wiki.linaro.org/QA/QATracker Regards, Jamie. -- Linaro Release Manager | Platform Project Manager

15 years

[NOTES] Minutes & Actions: Kernel Working Group meetings of March 28, 2011

by Mounir Bsaibes

Enclosed you'll find a link to the agenda, minutes, actions and IRC logs from the Linaro kernel working group weekly meetings of March 28, 2011. https://wiki.linaro.org/WorkingGroups/KernelConsolidation/Meetings/2011-03-… == Summary == * Nico will rebase linaro-2.6.38 the current linaro tree is based on 2.6.38-rc5 * Device Tree * Grant has sent a set of patches to John Rigby & the u-boot list which fixes up some things and enables dt support on most of the platforms we care about. Once those fixes are picked up d t should be enabled by default in the u-boot images produced by Linaro. Have to wait until it hits Nico's tree to complete the testing. Grant is pushing out a tree with the panda/beagle/samsung patches tonight will ask npitre to pull. * Bugs * From the bugs without assignee, the remaining bug without patch is 712175. * The Panda power off is fixed * The imprecise abort on Panda with display is fixed * Arnd posted the fix from Uli for 615974 "Interrupted system call handling" * Actions * 11.11 cycle: Everyone to take a look at the high-level requirements on the kernel from the TSC meeting: https://wiki.linaro.org/TSC/2011-03-16/Kernel, Paul will need to come back to TSC with a response. Regards, Mounir

15 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev