linaro-dev

linaro-dev@lists.linaro.org

4332 discussions

Do we have a memory footprint evaluation of ubuntu-desktop?

by Eric Miao

All, It was found that the ubuntu-desktop is a bit memory hungry on this i.MX53 QuickStart board. There is a large chunk of memory being reserved for the graphics/video drivers, and the memory size reserved has to consider the worst case. And we have to live with this before the unified memory allocator is available. I don't yet have a /proc/meminfo after system is right up, I'll get some statistics a bit later. However, I do want to know if we have some memory footprint evaluation of the existing ubuntu-desktop (we are using unity-2d)? And what can we do to improve on that? - eric

15 years

Notes & Actions: Linaro Graphics Working Group - Apr 13, 2011

by Alexandros Frantzis

Hi, notes and actions from our Wednesday graphics working group call are available on the wiki: + https://wiki.linaro.org/WorkingGroups/Middleware/Graphics/Notes/2011-04-13 Details about when and where of this meeting can be found here: + https://wiki.linaro.org/WorkingGroups/Middleware/Graphics#Weekly%20Public%2… Summary ======= * cairo-gles2 * Ported cairo-clock and cairogears to cairo-gles2. * Uploaded gles2 enabled packages for cairo, cairogears and cairo-clock to ppa:linaro-graphics-wg/ppa * Validated on OMAP4 (cairogears/cairoclock don't use any the repeat functionality missing in GL_IMG_texture_npot). * Benchmarks * Spandex unix-x11 branch merged in current upstream development tree. * Found issue with glcompbench rendering on ARM (coding error due to working with Mesa GLES spec violation - bug to be filed). * GLproxy - packages pushed to graphics working group ppa. * DRM/Mali - new Mali device driver drop (released 2011-04-01) integrated into git repository on git.linaro.org. * compiz work basically done (modulo some bug fixing), nux work underway. Thanks, -- - Alexandros

15 years

[PATCH 0/2] Modified Powertop2.0 to support ARM processor

by amit.kachhap＠linaro.org

The following set of patches modify the powertop version 2.0 to work for ARM platform. The C states and P states was measured after doing these changes in powertop. Amit Daniel Kachhap (2): Modified Powertop to support ARM processor Added an arm compiler flag cpu/cpu.cpp | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-) [PATCH 1/2] Modified Powertop to support ARM processor [PATCH 2/2] Added an arm compiler flag

15 years

[PATCH] S5PC2XX: GPIO Macro Values Corrected.

by Chander Kashyap

Macro values for Pull Up and Driver Strength were wrong. Signed-off-by: Chander Kashyap <chander.kashyap(a)linaro.org> --- arch/arm/include/asm/arch-s5pc2xx/gpio.h | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h b/arch/arm/include/asm/arch-s5pc2xx/gpio.h index 05e5b3e..7bfa8e8 100644 --- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h +++ b/arch/arm/include/asm/arch-s5pc2xx/gpio.h @@ -99,12 +99,12 @@ void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); /* Pull mode */ #define GPIO_PULL_NONE 0x0 #define GPIO_PULL_DOWN 0x1 -#define GPIO_PULL_UP 0x2 +#define GPIO_PULL_UP 0x3 /* Drive Strength level */ #define GPIO_DRV_1X 0x0 -#define GPIO_DRV_2X 0x1 -#define GPIO_DRV_3X 0x2 +#define GPIO_DRV_2X 0x2 +#define GPIO_DRV_3X 0x1 #define GPIO_DRV_4X 0x3 #define GPIO_DRV_FAST 0x0 #define GPIO_DRV_SLOW 0x1 -- 1.7.1

15 years

[PATCH] S5PC2XX: GPIO Macro Values Corrected.

by Chander Kashyap

Macro values for Pull Up and Driver Strength were wrong. Signed-off-by: Chander Kashyap <chander.kashyap(a)linaro.org> --- arch/arm/include/asm/arch-s5pc2xx/gpio.h | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h b/arch/arm/include/asm/arch-s5pc2xx/gpio.h index 05e5b3e..38303e4 100644 --- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h +++ b/arch/arm/include/asm/arch-s5pc2xx/gpio.h @@ -99,14 +99,13 @@ void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); /* Pull mode */ #define GPIO_PULL_NONE 0x0 #define GPIO_PULL_DOWN 0x1 -#define GPIO_PULL_UP 0x2 +#define GPIO_PULL_UP 0x3 /* Drive Strength level */ #define GPIO_DRV_1X 0x0 -#define GPIO_DRV_2X 0x1 -#define GPIO_DRV_3X 0x2 +#define GPIO_DRV_3X 0x1 +#define GPIO_DRV_2X 0x2 #define GPIO_DRV_4X 0x3 #define GPIO_DRV_FAST 0x0 #define GPIO_DRV_SLOW 0x1 - #endif -- 1.7.1

15 years

[PATCH android/device/linaro/pandaboard] Decrease the sdcard partiton number in vold.fstab

by Jeremy Chang

Due to ramdisk introduced that replace the rootfs partition, adjust the sdcard partition number. Signed-off-by: Jeremy Chang <jeremy.chang(a)linaro.org> --- vold.fstab | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/vold.fstab b/vold.fstab index c17bb64..04b9690 100644 --- a/vold.fstab +++ b/vold.fstab @@ -12,4 +12,4 @@ ## <sysfs_path> - List of sysfs paths to source devices ###################### -dev_mount sdcard /mnt/sdcard 7 /devices/platform/mmci-omap-hs.0/mmc_host/mmc0 +dev_mount sdcard /mnt/sdcard 6 /devices/platform/mmci-omap-hs.0/mmc_host/mmc0 -- 1.7.1

15 years

[PATCH android/device/linaro/beagleboard] Decrease the sdcard partiton number in vold.fstab

by Jeremy Chang

15 years

[PATCH android/device/linaro/common] Decrease the partition numbers for mounting

by Jeremy Chang

Due to ramdisk introduced that replace the rootfs partition, adjust the partition numbers to mount. Signed-off-by: Jeremy Chang <jeremy.chang(a)linaro.org> --- init.rc | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/init.rc b/init.rc index 7f94a21..c2836b9 100644 --- a/init.rc +++ b/init.rc @@ -91,10 +91,10 @@ loglevel 3 on fs # mount mmc partitions - mount ext4 mmc@blk0p3 /system - mount ext4 mmc@blk0p3 /system ro remount - mount ext4 mmc@blk0p5 /cache - mount ext4 mmc@blk0p6 /data + mount ext4 mmc@blk0p2 /system + mount ext4 mmc@blk0p2 /system ro remount + mount ext4 mmc@blk0p3 /cache + mount ext4 mmc@blk0p5 /data on post-fs # once everything is setup, no need to modify / -- 1.7.1

15 years

[Android: build.git] Rename the kernel to uImage for Linaro Android build

by Patrik Ryd

In the Linaro set up u-boot will look for uImage (and not for kernel). This patch is Linaro specific and should not be contibuted to AOSP. --- target/board/Android.mk | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/target/board/Android.mk b/target/board/Android.mk index 82dee3c..f3e4729 100644 --- a/target/board/Android.mk +++ b/target/board/Android.mk @@ -15,7 +15,7 @@ else endif # TARGET_NO_BOOTLOADER ifneq ($(strip $(TARGET_NO_KERNEL)),true) - INSTALLED_KERNEL_TARGET := $(PRODUCT_OUT)/kernel + INSTALLED_KERNEL_TARGET := $(PRODUCT_OUT)/uImage else INSTALLED_KERNEL_TARGET := endif -- 1.7.1

15 years

[PATCH] S5PC2XX: GPIO Macro Values Corrected.

by Chander Kashyap

Macro values for Pull Up and Driver Strength were wrong. Signed-off-by: Chander Kashyap <chander.kashyap(a)linaro.org> --- arch/arm/include/asm/arch-s5pc2xx/gpio.h | 8 +++----- 1 files changed, 3 insertions(+), 5 deletions(-) diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h b/arch/arm/include/asm/arch-s5pc2xx/gpio.h index 05e5b3e..e49edd4 100644 --- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h +++ b/arch/arm/include/asm/arch-s5pc2xx/gpio.h @@ -99,14 +99,12 @@ void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); /* Pull mode */ #define GPIO_PULL_NONE 0x0 #define GPIO_PULL_DOWN 0x1 -#define GPIO_PULL_UP 0x2 +#define GPIO_PULL_UP 0x3 /* Drive Strength level */ #define GPIO_DRV_1X 0x0 -#define GPIO_DRV_2X 0x1 -#define GPIO_DRV_3X 0x2 +#define GPIO_DRV_3X 0x1 +#define GPIO_DRV_2X 0x2 #define GPIO_DRV_4X 0x3 -#define GPIO_DRV_FAST 0x0 -#define GPIO_DRV_SLOW 0x1 #endif -- 1.7.1

15 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev