linaro-dev

linaro-dev@lists.linaro.org

4332 discussions

[Powertop][PATCH v2] conditionally disable pci if not supported

by Rajagopal Venkat

Signed-off-by: Rajagopal Venkat <rajagopal.venkat(a)linaro.org> --- configure.ac | 5 +++-- src/lib.cpp | 20 ++++++++++++++++++-- src/lib.h | 4 ++++ 3 files changed, 25 insertions(+), 4 deletions(-) diff --git a/configure.ac b/configure.ac index 4da4eea..3cbc7b0 100644 --- a/configure.ac +++ b/configure.ac @@ -48,8 +48,9 @@ AC_CHECK_FUNCS([fdatasync getpagesize gettimeofday memmove memset mkdir munmap p AC_SEARCH_LIBS([delwin], [ncursesw ncurses], [], AC_MSG_ERROR([ncurses is required but was not found]), []) PKG_CHECK_MODULES([PCIUTILS], [libpci],[],[ - AC_SEARCH_LIBS([pci_get_dev], [pci], [], AC_MSG_ERROR([libpci is required but was not found]), []) -]) + AC_SEARCH_LIBS([pci_get_dev], [pci], [], AC_DEFINE([HAVE_NO_PCI],[1],[Define if pci is not supported]), []) +]) + PKG_CHECK_MODULES([LIBZ], [zlib],[],[ AC_SEARCH_LIBS([deflate], [z], [], AC_MSG_ERROR([zlib is required but was not found]), []) ]) diff --git a/src/lib.cpp b/src/lib.cpp index 0f87e48..77e49a2 100644 --- a/src/lib.cpp +++ b/src/lib.cpp @@ -35,11 +35,13 @@ #include <math.h> #include <stdlib.h> +#include "lib.h" + +#ifndef HAVE_NO_PCI extern "C" { #include <pci/pci.h> } - -#include "lib.h" +#endif #include <stdio.h> #include <stdint.h> @@ -266,6 +268,7 @@ void format_watts(double W, char *buffer, unsigned int len) } +#ifndef HAVE_NO_PCI static struct pci_access *pci_access; char *pci_id_to_name(uint16_t vendor, uint16_t device, char *buffer, int len) @@ -290,6 +293,19 @@ void end_pci_access(void) pci_free_name_list(pci_access); } +#else + +char *pci_id_to_name(uint16_t vendor, uint16_t device, char *buffer, int len) +{ + return NULL; +} + +void end_pci_access(void) +{ +} + +#endif /* HAVE_NO_PCI */ + int utf_ok = -1; diff --git a/src/lib.h b/src/lib.h index 588c023..d354151 100644 --- a/src/lib.h +++ b/src/lib.h @@ -30,6 +30,10 @@ #endif #include <stdint.h> +#if HAVE_CONFIG_H +#include "config.h" +#endif + #ifndef DISABLE_I18N #define _(STRING) gettext(STRING) #else -- 1.7.9.5

13 years, 10 months

Update on Panda builds

by Vishal Bhoj

Hi, We have recently updated our panda builds due to which the instructions on building the sources have changed a little: tracking-panda.xml based build is now update to pick 3.4 tilt-tracking kernel and currently doesn't have hw accelerated graphics and hence the graphics binaries need not be installed (skip running install-binaries-4.0.4.sh) . You need to export these parameters before triggering the build: export TARGET_NO_HARDWAREGFX=1 export KERNEL_CONFIG=omap4plus_defconfig Here is the update build: https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc47-til… The staging-panda.xml manifest has been updated to track the 3.2 kernel which was previously used in tracking-panda builds. This build would now need the graphics binaries (Run install-binaries-4.0.4.sh ) after creating the sdcard. This build would have the features/bugs of previous tracking-panda builds: https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc47-til… Regards, Vishal

13 years, 10 months

[Powertop][PATCH] conditionally disable pci support on ARM platforms

by Rajagopal Venkat

Signed-off-by: Rajagopal Venkat <rajagopal.venkat(a)linaro.org> --- configure.ac | 16 +++++++++++++--- src/lib.cpp | 20 ++++++++++++++++++-- src/lib.h | 4 ++++ 3 files changed, 35 insertions(+), 5 deletions(-) diff --git a/configure.ac b/configure.ac index 4da4eea..c2ff430 100644 --- a/configure.ac +++ b/configure.ac @@ -22,6 +22,8 @@ AC_PROG_LIBTOOL AC_PROG_CC AC_PROG_INSTALL AM_PROG_CC_C_O +AC_CANONICAL_HOST +PKG_PROG_PKG_CONFIG # Checks for libraries. # Checks for header files. @@ -47,9 +49,17 @@ AC_CHECK_FUNCS([fdatasync getpagesize gettimeofday memmove memset mkdir munmap p AC_SEARCH_LIBS([delwin], [ncursesw ncurses], [], AC_MSG_ERROR([ncurses is required but was not found]), []) -PKG_CHECK_MODULES([PCIUTILS], [libpci],[],[ - AC_SEARCH_LIBS([pci_get_dev], [pci], [], AC_MSG_ERROR([libpci is required but was not found]), []) -]) +case "$host" in +arm*) + AC_DEFINE([HAVE_NO_PCI],[1],[Define if host platform is ARM]) + ;; +*) + PKG_CHECK_MODULES([PCIUTILS], [libpci],[],[ + AC_SEARCH_LIBS([pci_get_dev], [pci], [], AC_MSG_ERROR([libpci is required but was not found]), []) + ]) + ;; +esac + PKG_CHECK_MODULES([LIBZ], [zlib],[],[ AC_SEARCH_LIBS([deflate], [z], [], AC_MSG_ERROR([zlib is required but was not found]), []) ]) diff --git a/src/lib.cpp b/src/lib.cpp index 0f87e48..77e49a2 100644 --- a/src/lib.cpp +++ b/src/lib.cpp @@ -35,11 +35,13 @@ #include <math.h> #include <stdlib.h> +#include "lib.h" + +#ifndef HAVE_NO_PCI extern "C" { #include <pci/pci.h> } - -#include "lib.h" +#endif #include <stdio.h> #include <stdint.h> @@ -266,6 +268,7 @@ void format_watts(double W, char *buffer, unsigned int len) } +#ifndef HAVE_NO_PCI static struct pci_access *pci_access; char *pci_id_to_name(uint16_t vendor, uint16_t device, char *buffer, int len) @@ -290,6 +293,19 @@ void end_pci_access(void) pci_free_name_list(pci_access); } +#else + +char *pci_id_to_name(uint16_t vendor, uint16_t device, char *buffer, int len) +{ + return NULL; +} + +void end_pci_access(void) +{ +} + +#endif /* HAVE_NO_PCI */ + int utf_ok = -1; diff --git a/src/lib.h b/src/lib.h index 588c023..d354151 100644 --- a/src/lib.h +++ b/src/lib.h @@ -30,6 +30,10 @@ #endif #include <stdint.h> +#if HAVE_CONFIG_H +#include "config.h" +#endif + #ifndef DISABLE_I18N #define _(STRING) gettext(STRING) #else -- 1.7.9.5

13 years, 10 months

[PATCH v5 0/7] cleanup imx5 idle, add imx5/6 cpuidle

by Robert Lee

Cleanup up imx5 idle code and enable imx5 low powe idle for imx53. Add common imx cpuidle initialization functionality and add a i.MX5 and i.MX6Q platform cpuidle implementation. Based on v3.4 plus recently submitted/accepted MACHINE_INIT late_initcall patch series: http://www.spinics.net/lists/arm-kernel/msg171620.html and common clock patch series: http://comments.gmane.org/gmane.linux.ports.arm.kernel/161043 v5 changes: * rebase to v3.4 plus common clock patch series * various trivial changes/fixes from v4 submssion * Add separate pm_init patch for imx51 and imx53 v4 changes: * Added several imx5 idle cleanups to series. * Modified imx_io_p2v function to allow common imx5 AIPS2 bus virutal address * Added comment to tzic_wakeup_enable(). * Movied imx5 idle code from mm-imx5.c to pm-imx5.c. * Removed unnecessary time consuming code execution that ran on each idle instance. * modified imx5_pm_init to be a late_initcall * added late_initcall to all imx53 MACHINE_START entries. * enabled imx5 low power idle for imx53 * rebased cpuidle driver on top of imx5 cleanup changes. * modified cpuidle driver exit time to reflect removal of unnecessary code http://comments.gmane.org/gmane.linux.linaro.devel/11858 v3 changes: * removed file introduced in v1 no longer needed after v2 [per Shawn Guo] * re-ordered added #includes in alphabetical order [per Shawn Guo] * Remove if(!drv) check to allow handling by stack trace [per Sascha Hauer] * Added missing return value in error meesage [per Shawn Guo] * fixed (void *) casting problem pointed out Sasha Hauer. Used a different type of casting to properly give warning on improper casting: arm_pm_idle = (void (*)(void))imx5_idle; Used this casting instead of adding a dummy caller function because adding the dummy function appears to unnecessarily introduce the following additional operations: static void imx5_pm_idle(void) { a0: e1a0c00d mov ip, sp a4: e92dd800 push {fp, ip, lr, pc} a8: e24cb004 sub fp, ip, #4 imx5_idle(); ac: ebffffd3 bl 0 <imx5_idle> } b0: e89da800 ldm sp, {fp, sp, pc} http://permalink.gmane.org/gmane.linux.linaro.devel/11653 v2 changes: * Removed some unnecessary spaces [per Jess Juhl] * Added return value for an error message [per Sascha Hauer] * Reworked init scheme to use device tree late_initcall [per Sascha and Shawn] * Moved imx6q and imx5 cpuidle functionality to existing files. https://lkml.org/lkml/2012/5/1/363 v1 initial submission: https://lkml.org/lkml/2012/4/16/644 Robert Lee (7): ARM: imx: Modify IMX_IO_P2V macro ARM: imx: Add comments to tzic_enable_waker() ARM: imx: clean and consolidate imx5 suspend and idle code ARM: imx: Enable imx53 low power idle ARM: imx: Add common imx cpuidle init functionality. ARM: imx: Add imx5 cpuidle ARM: imx: Add imx6q cpuidle driver arch/arm/mach-imx/clk-imx51-imx53.c | 2 +- arch/arm/mach-imx/clock-mx51-mx53.c | 1 + arch/arm/mach-imx/imx53-dt.c | 1 + arch/arm/mach-imx/mach-imx6q.c | 19 +++++ arch/arm/mach-imx/mach-mx53_ard.c | 1 + arch/arm/mach-imx/mach-mx53_evk.c | 1 + arch/arm/mach-imx/mach-mx53_loco.c | 1 + arch/arm/mach-imx/mach-mx53_smd.c | 1 + arch/arm/mach-imx/mm-imx5.c | 26 ++----- arch/arm/mach-imx/pm-imx5.c | 111 ++++++++++++++++++++++------- arch/arm/plat-mxc/Makefile | 1 + arch/arm/plat-mxc/cpuidle.c | 80 +++++++++++++++++++++ arch/arm/plat-mxc/include/mach/common.h | 6 +- arch/arm/plat-mxc/include/mach/cpuidle.h | 22 ++++++ arch/arm/plat-mxc/include/mach/hardware.h | 25 ++++--- arch/arm/plat-mxc/tzic.c | 4 ++ 16 files changed, 243 insertions(+), 59 deletions(-) create mode 100644 arch/arm/plat-mxc/cpuidle.c create mode 100644 arch/arm/plat-mxc/include/mach/cpuidle.h -- 1.7.10

13 years, 10 months

Fwd: Contributing to dalvik/libcore: small changes

by Zach Pfeffer

FYI ---------- Forwarded message ---------- From: Jean-Baptiste Queru <jbq(a)android.com> Date: 21 June 2012 12:22 Subject: Contributing to dalvik/libcore: small changes To: android-contrib(a)googlegroups.com We're slightly changing the way we manage some branches, please note the following changes in the way contributions now work in the dalvik and libcore projects: -New contributions to those projects need to be prepared in the master-dalvik branch. The master branch (and other active development branches) use a frozen snapshot of those projects, on top of which we can't accept contributions. -Existing contributions to those projects (i.e. that have been uploaded) need no further action. -If you have a master client, you can switch to master-dalvik with "repo init -b master-dalvik ; repo sync". -Technically, you can use master-dalvik to contribute to any project, but that's not recommended. Unless you're explicitly contributing to dalvik or libcore, please use the plain master branch to prepare your contributions. -Note that, since the master branch uses a frozen snapshot, changes contributed to the dalvik and libcore projects in master-dalvik don't get reflected in master. -This does not affect tagged releases, those will continue to be managed as usual. JBQ -- Jean-Baptiste M. "JBQ" Queru Technical Lead, Android Open Source Project, Google. Questions sent directly to me that have no reason for being private will likely get ignored or forwarded to a public forum with no further warning. -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 10 months

android-build Frontend Downtime

by Milo Casagrande

Hello everyone, the Infrastructure Team is going to deploy a new version of the android-build frontend, in order to address bug #1015651. We are planning to deploy it today (June 21st) at 12UTC, and the deployment shouldn't take more than 10 minutes. Only the frontend will be affected. If the downtime will cause you significant problems, please get in touch with us. Thanks. -- Milo Casagrande Infrastructure Engineer Linaro.org <www.linaro.org> │ Open source software for ARM SoCs

13 years, 10 months

[PATCH] Update for Android build system

by kejun.zhou

From: "kejun.zhou" <kejun.zhou(a)linaro.org> Signed-off-by: kejun.zhou <kejun.zhou(a)linaro.org> --- cpufreq/Android.mk | 1 + cpuhotplug/Android.mk | 2 ++ cpuidle/Android.mk | 2 ++ include/Android.mk | 1 + sched_mc/Android.mk | 1 + suspend/Android.mk | 1 + thermal/Android.mk | 1 + utils/Android.mk | 1 + 8 files changed, 10 insertions(+) diff --git a/cpufreq/Android.mk b/cpufreq/Android.mk index f563d25..2fa747f 100644 --- a/cpufreq/Android.mk +++ b/cpufreq/Android.mk @@ -8,6 +8,7 @@ define $(module_name)_add_executable LOCAL_MODULE_TAGS := optional LOCAL_MODULE_CLASS := tests LOCAL_MODULE := $1.sh + systemtarball: $1.sh LOCAL_SRC_FILES := $1.sh LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)/pm-qa/$(module_name) include $(BUILD_PREBUILT) diff --git a/cpuhotplug/Android.mk b/cpuhotplug/Android.mk index 521f3ee..fda35a9 100644 --- a/cpuhotplug/Android.mk +++ b/cpuhotplug/Android.mk @@ -8,6 +8,7 @@ define $(module_name)_add_executable LOCAL_MODULE_TAGS := optional LOCAL_MODULE_CLASS := tests LOCAL_MODULE := $1.sh + systemtarball: $1.sh LOCAL_SRC_FILES := $1.sh LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)/pm-qa/$(module_name) include $(BUILD_PREBUILT) @@ -21,6 +22,7 @@ define $(module_name)_etc_add_executable LOCAL_MODULE_TAGS := optional LOCAL_MODULE_CLASS := tests LOCAL_MODULE := $1.sh + systemtarball: $1.sh LOCAL_SRC_FILES := $1.sh LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)/pm-qa/$(module_name) include $(BUILD_PREBUILT) diff --git a/cpuidle/Android.mk b/cpuidle/Android.mk index 35124d7..d85d0c0 100644 --- a/cpuidle/Android.mk +++ b/cpuidle/Android.mk @@ -8,6 +8,7 @@ define $(module_name)_add_executable LOCAL_MODULE_TAGS := optional LOCAL_MODULE_CLASS := tests LOCAL_MODULE := $1.sh + systemtarball: $1.sh LOCAL_SRC_FILES := $1.sh LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)/pm-qa/$(module_name) include $(BUILD_PREBUILT) @@ -18,6 +19,7 @@ $(foreach item,$(test_num),$(eval $(call $(module_name)_add_executable, $(module include $(CLEAR_VARS) LOCAL_MODULE := cpuidle_killer +systemtarball: cpuidle_killer LOCAL_SRC_FILES:= cpuidle_killer.c LOCAL_STATIC_LIBRARIES := libcutils libc LOCAL_MODULE_TAGS := tests diff --git a/include/Android.mk b/include/Android.mk index 6173bb4..1e02c09 100644 --- a/include/Android.mk +++ b/include/Android.mk @@ -8,6 +8,7 @@ define $(module_name)_etc_add_executable LOCAL_MODULE_TAGS := optional LOCAL_MODULE_CLASS := tests LOCAL_MODULE := $1.sh + systemtarball: $1.sh LOCAL_SRC_FILES := $1.sh LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)/pm-qa/$(module_name) include $(BUILD_PREBUILT) diff --git a/sched_mc/Android.mk b/sched_mc/Android.mk index 44cee14..f9f9d90 100644 --- a/sched_mc/Android.mk +++ b/sched_mc/Android.mk @@ -8,6 +8,7 @@ define $(module_name)_add_executable LOCAL_MODULE_TAGS := optional LOCAL_MODULE_CLASS := tests LOCAL_MODULE := $1.sh + systemtarball: $1.sh LOCAL_SRC_FILES := $1.sh LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)/pm-qa/$(module_name)_mc include $(BUILD_PREBUILT) diff --git a/suspend/Android.mk b/suspend/Android.mk index 41cdd99..06f6db9 100644 --- a/suspend/Android.mk +++ b/suspend/Android.mk @@ -8,6 +8,7 @@ define $(module_name)_add_executable LOCAL_MODULE_TAGS := optional LOCAL_MODULE_CLASS := tests LOCAL_MODULE := $1.sh + systemtarball: $1.sh LOCAL_SRC_FILES := $1.sh LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)/pm-qa/$(module_name) include $(BUILD_PREBUILT) diff --git a/thermal/Android.mk b/thermal/Android.mk index 0389c04..3f0b958 100644 --- a/thermal/Android.mk +++ b/thermal/Android.mk @@ -8,6 +8,7 @@ define $(module_name)_add_executable LOCAL_MODULE_TAGS := optional LOCAL_MODULE_CLASS := tests LOCAL_MODULE := $1.sh + systemtarball: $1.sh LOCAL_SRC_FILES := $1.sh LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)/pm-qa/$(module_name) include $(BUILD_PREBUILT) diff --git a/utils/Android.mk b/utils/Android.mk index c41415f..272a70c 100644 --- a/utils/Android.mk +++ b/utils/Android.mk @@ -8,6 +8,7 @@ define $(module_name)_etc_add_executable LOCAL_MODULE_TAGS := optional LOCAL_MODULE_CLASS := tests LOCAL_MODULE := $1 + systemtarball: $1 LOCAL_SRC_FILES := $1.c LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)/pm-qa/$(module_name) include $(BUILD_EXECUTABLE) -- 1.7.10

13 years, 10 months

Android Origen 3.5 Bringup

by Annamalai Lakshmanan

Hi All, Linaro kernel 3.5 has been brought up in Android for Origen Board recently and can be obtained from: repo init -u git://android.git.linaro.org/platform/manifest.git -b linaro_android_4.0.4 -m tracking-origen.xml. repo sync 3.5 Kernel is currently being pointed to tracking branch, 3.4 is pointed to stable branch. 3.5 kernel has 3D Graphics MALI enabled, but HDMI and Video Playback are being worked out. With Regards, Annamalai

13 years, 10 months

Mumble server having issues?

by John Stultz

So I've been having trouble with the mumble server and the behavior is odd enough that I don't think its a problem just on my end. I'm seeing cases where: * Only one of two members in a room can hear me talk * One member could hear both parties talking * I can't hear either of them talk As well as other cases where neither parties can hear each other. In all the cases, my talk-indicator (the red lips) has been lighting up properly, but the other sides isn't (so its not just an audio playback issue on my side, my mumble client isn't getting any input from other members). I know Joey's out, but does anyone else have the ability to check in and debug the mumble server? thanks -john

13 years, 10 months

snowball hang issue with latest android builds.

by Vishal Bhoj

Hi, Snowball builds #327,#330,#332 seem to hang when we run the script mentioned in this bug: https://bugs.launchpad.net/igloocommunity/+bug/1014650 I have seen that system hangs when I run Linpack[1]<http://android.git.linaro.org/gitweb?p=linaro/benchmarks.git;a=blob;f=linpa…>under certain environments. Here is my observation : 1. System doesn't hang when I run Linpack Single/multi thread configuration as a normal application by launching and running it (using monkeyrunner in my case) 2. System hangs when I run the same application when I run the application in conjunction with androidscreencast<https://wiki.linaro.org/Platform/Android/AndroidScreencast>. I could be that system hangs only at some high loads . [1] : http://android.git.linaro.org/gitweb?p=linaro/benchmarks.git;a=blob;f=linpa… Regards, Vishal

13 years, 10 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev