linaro-dev May 2012

linaro-dev@lists.linaro.org

118 participants
90 discussions

by Andrey Konovalov

Greetings, I've just created linux-linaro-core-tracking branch in git://git.linaro.org/kernel/linux-linaro-tracking.git. It is based on mainline tip, and has all the Platform and Working Groups topics which would appear in the next linux-linaro kernel release. No topics from the Landing Teams there (this is what "core" implies). This tree will be the basis for the next (12.05) linux-linaro kernel release. So if you have a topic to be added to 12.05 you can ask me to add it (the sooner you ask, the better), and it will appear in linux-linaro-core-tracking first. The request to add a topic must include the git tree location for me to pull the topic from, and the base used by this topic (mainline, or another topic). If no base for the topic is specified, the mainline is assumed. If needed, this is ok to rebase the topic; this would be easier for me to handle than e.g. reconfiguring my scripts to use topic-3.4rc5 branch instead of topic-3.4rc4 branch used so far etc. Again, starting from now this tree is open for the next release (12.05) topics. The linux-linaro-core-tracking tree is first of all to identify the conflicts early, so it could fail to build sometimes, or the kernel built from it may not boot etc. The plan is to rebase this tree on the current mainline tip daily. The topics causing the conflicts would be excluded from the linux-linaro-core-tracking tree, and would be brought back into it after the conflicts are resolved by the topic owners. Thanks, Andrey

14 years, 1 month

PowerVR, 3.3 kernel and omap_drm

by Martin Ertsås

Hi. I have gotten a lot of help from you guys getting the PowerVR drivers up and running with the 3.3 kernel on the Pandaboard ES. Problem now is that all I tested then, was that X was running. After some more work, we tried out EGL, and found out that this is not working. The 3.3 kernel I'm using is revision f8e851d03e884b60b5207f59a342da9cafdb415f from tilt-3.3 from the ti-landing team. I'm using the PowerVR drivers in http://ppa.launchpad.net/tiomap-dev/omap-trunk/ubuntu/pool/main/, that is pvr-omap4_1.7.15.0.1.57 and pvr-omap4-dkms_1.7.15.0.1.54. I'm also using the libdrm, libdri2 and xorg server from the same place, using the versions from: https://launchpad.net/~tiomap-dev/+archive/omap-trunk?field.series_filter=p… Problem is, when trying to run something using EGL, I get the output from: http://pastebin.com/e5deVmiD Running it through gdb on the device, I see that it segfaults in omap_bo_handle in /usr/lib/libdrm_omap.so.1 This file is compiled, using the patches listed in debian/patches/series in the latest commit from git://gitorious.org/ubuntu-omap/libdrm.git, and with configure arguments: --enable-omap-experimental-api --enable-udev --enable-libkms --disable-radeon Any ideas on what might be wrong or what I can try? I have tried copying the libdrm_omap binary from the ppa, as it looks like that might be at fault, but no luck. Best Regards Martin Ertsas

14 years, 1 month

No group tracks at Connect

by Zach Pfeffer

While we're planning for connect, I'd like to suggest that we do away with team tracks all together and just have topic tracks. This would align with our topic based approach to things now, and would be a way to breakdown our silo's. The topic track would be lead by a topic champion. What do people think? -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years, 1 month

Blueprints and topics to be covered at 12.05 by the Developer Platform Team

by Ricardo Salveti

Hi, Trying to get back to the proper way of scheduling and publishing what will be covered by the Developer Platform team during the 12.05 cycle, follows the blueprint description of what we're planning to work on during this cycle. Milestone link: https://launchpad.net/linaro-dev-platform/+milestone/12.05 The list is quite long, but most of the blueprints are basically covering work that was supposed to get done during 12.04, that unfortunately got blocked once LAVA got off-line. Some interesting topics we'll cover this month: * Common Ubuntu kernel config fragment across all kernel packages used at the LEB * Ubuntu sauce produced as a topic branch for Linux Linaro * Cross toolchain updates based on 4.7 for Quantal * Enablement test cases to be used with LAVA (usb-host-mode and others) * Cross buildd and multi-arch fixes planning work that might come with the ARMv8 effort Hopefully this cycle we'll also be able to get the images in a better shape sooner, trying to get the QA and Release team more involved with our releases (to improve our image/builds quality). Thanks! -- Ricardo Salveti de Araujo

14 years, 1 month

[PATCH 00/18][V3] ARM: OMAP3/4 : cpuidle34xx and cpuidle44xx cleanups

by Daniel Lezcano

This patchset makes some cleanup on these cpuidle drivers and consolidate the code across both architecture. Tested on OMAP3 (igepV2). Partially tested on OMAP4 (pandaboard), without offlining the cpu1. V3 : * replace OMAP4_NUM_STATES and OMAP3_NUM_STATES by ARRAY_SIZE * Fixed changelog * Fixed OMAP4_NUM_STATES going back and forth in the patchset * Removed erratum check at init time V2 : * Fixed a couple of typos in the patch description V1 : Initial Post Daniel Lezcano (18): ARM: OMAP4: cpuidle - Remove unused valid field ARM: OMAP4: cpuidle - Declare the states with the driver declaration ARM: OMAP4: cpuidle - Remove the cpuidle_params_table table ARM: OMAP4: cpuidle - fix static omap4_idle_data declaration ARM: OMAP4: cpuidle - Initialize omap4_idle_data at compile time ARM: OMAP4: cpuidle - use the omap4_idle_data variable directly ARM: OMAP4: cpuidle - remove omap4_idle_data initialization at boot time ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table ARM: OMAP3: define cpuidle statically ARM: OMAP3: cpuidle - remove errata check in the init function ARM: OMAP3: cpuidle - remove the 'valid' field ARM: OMAP3: cpuidle - remove cpuidle_params_table ARM: OMAP3: define statically the omap3_idle_data ARM: OMAP3: cpuidle - use omap3_idle_data directly ARM: OMAP3: cpuidle - simplify next_valid_state ARM: OMAP3: set omap3_idle_data as static ARM: OMAP3/4: consolidate cpuidle Makefile ARM: OMAP3: cpuidle - set global variables static arch/arm/mach-omap2/Makefile | 11 +- arch/arm/mach-omap2/board-rx51.c | 38 +++--- arch/arm/mach-omap2/cpuidle34xx.c | 306 +++++++++++++++---------------------- arch/arm/mach-omap2/cpuidle44xx.c | 134 +++++++---------- arch/arm/mach-omap2/pm.h | 38 ++--- 5 files changed, 212 insertions(+), 315 deletions(-) -- 1.7.5.4

14 years, 1 month

[PATCH v2 0/3] Add imx cpuidle

by Robert Lee

Add common imx cpuidle initialization functionality and add a i.MX5 and i.MX6Q platform cpuidle implementation. Based on v3.4-rc5 plus recently submitted device tree late_initcall patch: http://www.spinics.net/lists/arm-kernel/msg171620.html Changes since v1: * Removed some unnecessary spaces * Added return value for an error message * Reworked init scheme to use device tree late_initcall. * Moved imx6q and imx5 cpuidle functionality to existing files. Robert Lee (3): ARM: imx: Add common imx cpuidle init functionality. ARM: imx: Add imx5 cpuidle driver ARM: imx: Add imx6q cpuidle driver arch/arm/mach-imx/cpuidle-imx6q.c | 33 ++++++++++++ arch/arm/mach-imx/mach-imx6q.c | 18 +++++++ arch/arm/mach-imx/mm-imx5.c | 42 ++++++++++++++-- arch/arm/plat-mxc/Makefile | 1 + arch/arm/plat-mxc/cpuidle.c | 80 ++++++++++++++++++++++++++++++ arch/arm/plat-mxc/include/mach/cpuidle.h | 22 ++++++++ 6 files changed, 193 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-imx/cpuidle-imx6q.c create mode 100644 arch/arm/plat-mxc/cpuidle.c create mode 100644 arch/arm/plat-mxc/include/mach/cpuidle.h -- 1.7.10

14 years, 1 month

Fwd: adb question

by YongQin Liu

Hi, Linas Sorry, one thing I want to make sure is that you are using the android images from https://android-build.linaro.org/? Hi, All If you have met such problems as below, please give your suggestion. Thanks, Yongqin Liu ---------- Forwarded message ---------- From: Linas Chang <shchang(a)marvell.com> Date: 2 May 2012 15:46 Subject: RE: adb question To: YongQin Liu <yongqin.liu(a)linaro.org> Hi YongQin**** ** ** I test more times , I found the case since be changed**** ** ** I found device hard to get ip , so I install a dhcp server at my computer , and ethnet connect to snowboard directly**** ** ** After device boot up , through your command “netcfg eth0 dhcp” ,I still can’t obtain IP **** ** ** But I found strange thing , even console show up “dhcp time out” ,but the log for dhcp server at my computer told me , it has assign a IP to snowboard , even snowboard console show dhcp time out**** ** ** At this case , I used fixed IP that same as my computer dhcp log said for snow board , I could ping device form host , and adb look ok ,connect and push also work**** ** ** But I need to connect to my server to do further thing , so I can’t used above method to fixed adb issue ,and if I connect to server I hard to know which IP server assign to snow board**** ** ** ** ** So do you have any idea why dhcp server assign IP to snowboard , but snowboard console still told me it can’t obtain IP from DHCP server**** ** ** ** ** ** ** Linas**** ** ** *From:* YongQin Liu [mailto:yongqin.liu@linaro.org] *Sent:* Tuesday, April 24, 2012 11:54 AM *To:* Linas Chang *Subject:* Re: adb question**** ** ** Hi, Linas**** On 24 April 2012 11:29, Linas Chang <shchang(a)marvell.com> wrote:**** Thanks for your help**** **** Currently , I could do the adb shell follow your instruction**** **** But I still can’t do adb push**** Could you paste your error information?**** >From this sentence, I think we can't see why it can't do the adb push command.**** ** ** And about the question below, I am sorry I can't give you any help.**** You can wait other members for help.**** ** ** Thanks,**** Yongqin Liu **** **** And I notice there are code dump during system boot up , I don’t build the linux BSP and android , I used pre-build binary , the code dump as below**** **** Another question , I found your product spec said , snowboard need 5V power , could you let me know which amp is device needed**** **** 9.562652] ------------[ cut here ]------------**** [ 9.567291] WARNING: at /mnt/jenkins/workspace/linaro-android_snowball-ics-gcc46-igloo-stable-blob-12.03-release/build/kernel/kernel/softirq.c:159 local_bh_enable_ip+0xa0/0xd4()**** [ 9.583129] Modules linked in: gator(O)**** [ 9.586975] [<c001d8a0>] (unwind_backtrace+0x0/0x144) from [<c05d9e2c>] (dump_stack+0x20/0x24)**** [ 9.595611] [<c05d9e2c>] (dump_stack+0x20/0x24) from [<c003378c>] (warn_slowpath_common+0x5c/0x74)**** [ 9.604553] [<c003378c>] (warn_slowpath_common+0x5c/0x74) from [<c00337d0>] (warn_slowpath_null+0x2c/0x34)**** [ 9.614227] [<c00337d0>] (warn_slowpath_null+0x2c/0x34) from [<c003af64>] (local_bh_enable_ip+0xa0/0xd4)**** [ 9.623687] [<c003af64>] (local_bh_enable_ip+0xa0/0xd4) from [<c05e1f58>] (_raw_spin_unlock_bh+0x48/0x4c)**** [ 9.633270] [<c05e1f58>] (_raw_spin_unlock_bh+0x48/0x4c) from [<c040b61c>] (cg2900_hu_dequeue+0x7c/0x244)**** [ 9.642852] [<c040b61c>] (cg2900_hu_dequeue+0x7c/0x244) from [<c040db10>] (cg2900_hci_uart_tx_wakeup+0x124/0x180)**** [ 9.653106] [<c040db10>] (cg2900_hci_uart_tx_wakeup+0x124/0x180) from [<c040dbcc>] (hci_uart_tty_wakeup+0x60/0x7c)**** [ 9.663452] [<c040dbcc>] (hci_uart_tty_wakeup+0x60/0x7c) from [<c028bd0c>] (tty_wakeup+0x60/0x6c)**** [ 9.672332] [<c028bd0c>] (tty_wakeup+0x60/0x6c) from [<c02a71a8>] (uart_write_wakeup+0x28/0x30)**** [ 9.681030] [<c02a71a8>] (uart_write_wakeup+0x28/0x30) from [<c02aa1ac>] (pl011_int+0x518/0x5b0)**** [ 9.689819] [<c02aa1ac>] (pl011_int+0x518/0x5b0) from [<c00946d4>] (handle_irq_event_percpu+0x78/0x2e0)**** [ 9.699218] [<c00946d4>] (handle_irq_event_percpu+0x78/0x2e0) from [<c0094988>] (handle_irq_event+0x4c/0x6c)**** [ 9.709045] [<c0094988>] (handle_irq_event+0x4c/0x6c) from [<c00978cc>] (handle_fasteoi_irq+0xa8/0x168)**** [ 9.718444] [<c00978cc>] (handle_fasteoi_irq+0xa8/0x168) from [<c0093e70>] (generic_handle_irq+0x3c/0x50)**** [ 9.728027] [<c0093e70>] (generic_handle_irq+0x3c/0x50) from [<c0016058>] (handle_IRQ+0x5c/0xbc)**** [ 9.736816] [<c0016058>] (handle_IRQ+0x5c/0xbc) from [<c0008544>] (gic_handle_irq+0x34/0xb8)**** [ 9.745239] [<c0008544>] (gic_handle_irq+0x34/0xb8) from [<c0014c80>] (__irq_svc+0x40/0x70)**** [ 9.753601] Exception stack(0xed1d5d68 to 0xed1d5db0)**** [ 9.758636] 5d60: c090a880 00000000 ed1d5e6c c0029324 fffffffd 00000000**** [ 9.766815] 5d80: 00000000 ed1d5e6c 00000000 00000000 00000000 ed1d5dd4 c090a880 ed1d5db0**** [ 9.774993] 5da0: c005afa4 c0029324 20000013 ffffffff**** [ 9.780059] [<c0014c80>] (__irq_svc+0x40/0x70) from [<c0029324>] (qos_delayed_cpufreq_notifier+0x0/0xb8)**** [ 9.789550] [<c0029324>] (qos_delayed_cpufreq_notifier+0x0/0xb8) from [<c005b168>] (__srcu_notifier_call_chain+0x54/0x70)**** [ 9.800506] [<c005b168>] (__srcu_notifier_call_chain+0x54/0x70) from [<c005b1ac>] (srcu_notifier_call_chain+0x28/0x30)**** [ 9.811187] [<c005b1ac>] (srcu_notifier_call_chain+0x28/0x30) from [<c03cf124>] (cpufreq_notify_transition+0xc4/0x2dc)**** [ 9.821899] [<c03cf124>] (cpufreq_notify_transition+0xc4/0x2dc) from [<c03d43a0>] (dbx500_cpufreq_target+0x9c/0x150)**** [ 9.832427] [<c03d43a0>] (dbx500_cpufreq_target+0x9c/0x150) from [<c03ce29c>] (__cpufreq_driver_target+0x88/0xc4)**** [ 9.842681] [<c03ce29c>] (__cpufreq_driver_target+0x88/0xc4) from [<c03d29b8>] (do_dbs_timer+0x498/0x4b0)**** [ 9.852264] [<c03d29b8>] (do_dbs_timer+0x498/0x4b0) from [<c004f170>] (process_one_work+0x138/0x4ac)**** [ 9.861389] [<c004f170>] (process_one_work+0x138/0x4ac) from [<c004f88c>] (worker_thread+0x188/0x374)**** [ 9.870605] [<c004f88c>] (worker_thread+0x188/0x374) from [<c0054b64>] (kthread+0x98/0xa4)**** [ 9.878875] [<c0054b64>] (kthread+0x98/0xa4) from [<c0016318>] (kernel_thread_exit+0x0/0x8)**** [ 9.887237] ---[ end trace c0fe18d58f2dc323 ]---**** **** **** Linas**** **** *From:* YongQin Liu [mailto:yongqin.liu@linaro.org] *Sent:* Monday, April 23, 2012 7:48 PM *To:* Linas Chang *Cc:* linaro-android(a)lists.linaro.org *Subject:* Re: adb question**** **** Hi, Linas**** **** Maybe you can try following commands:**** **** ---------------------------------------------------------------------------------------------- **** netcfg eth0 dhcp #get your eth network up**** ifconfig eth0 #get your board IP **** echo 0>/sys/class/android_usb/android0/enable #enable adb via IP**** setprop service.adb.tcp.port 5555 #set the adb connection port**** stop adbd # restart adbd**** start adbd**** ---------------------------------------------------------------------------------------------- **** **** If the above commands work for you, please let me know.**** I will update the wiki then.**** **** Thanks,**** Yongqin Liu**** **** On 23 April 2012 19:06, Linas Chang <shchang(a)marvell.com> wrote:**** Dear linaro-support team**** **** Currently , I used linaro-android_snowball-ics-gcc46-igloo-stable-blob-12.03-release at your snowboard**** **** I face a question , that is**** **** When I used adb , follow below command form your web-site**** **** - ADB only works over IP In the console type:**** · stop adbd**** · setprop service.adb.tcp.port 6565**** · start adbd**** · ifconfig eth0 # to get boardsIP**** **** after my host connect to device**** , I try to used adb push –s <device IP>:6565 <my txt file> /data or adb –s <device ip>:6565 shell form host**** Both fail ,and I didn’t see any error meaage , it look like hang after I type above adb command**** **** Do you have any suggestion about this**** **** Thanks for your help**** **** Linas**** **** **** **** _______________________________________________ linaro-android mailing list linaro-android(a)lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android**** **** ** **

14 years, 1 month

pull build configs into Git.

by Zach Pfeffer

Fathi, Since we're at the start of 12.05 we need to shift the builds over to the tip toolchain and stop daily builds for various baselines. I figure we can also get the configs into git. Do you want to take care of getting the current configs into git and then shift the builds or the other way around? For 12.05 I'd kill all dailies except for the tips listed on android-build.linaro.org under: "Users who are interested in tip builds with Linaro goodness should use:" People can always re-enable dalies they're interested in. -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years, 1 month

Linaro Release 12.04 Postmortem Summary

by David Zinman

Postmortem and lessons learned for Linaro's release 2012.04 https://wiki.linaro.org/Cycles/1204/Release/Review Highlights and Key Successes ============================ The Linaro 12.04 delivery included ARM Fast Models a platform which assists programmers by giving them a virtual environment to develop software for unreleased silicon. The migration to Ubuntu 12.04 (Precise Pangolin) by the Ubuntu Developer Platform team was delivered and built for armhf. Linaro U-boot is now based on the upstream release v2012.04.1. Support for big.LITTLE integrated switcher continues to be added to deliverables. The Snowball board has been enabled with multimedia support by the Android team. The team is also supporting big.LITTLE testing and development. Postmortem and Lessons Learned ============================== The unavailability of the LAVA lab was a perpetual handicap throughout the cycle. Consequences of the inaccessible lab include inconsistent testing of the images, possible missed issues, and the reduced quantity and quality of deliverables. Jenkins scripting has also been unstable for this cycle adding to the unpredictability of the release. However, even with these problems, the engineers pulled together and exhibited some great teamwork and effort in order to release on time. Particular acknowledgement goes to Fathi, Paul L., Abhishek, Botao, Ricardo, Andy D., Deepti, and Georgy. Some of the teams are dealing with staffing issues with the departures of a few members, and new people coming on board. Some teams have reduced resources. An issue that some teams have drawn attention to is the opaqueness of the TSC and roadmap process. Some roadmap processes are requested of teams with little notice for delivery, and without good communication of the deliverable. Some lessons learned from the cycle are: * Need a staging area with the same setup as production * This would mitigate the risk of an essential build service like LAVA and Jenkins going down * Can be deployed to production, staging and personal environments. * Validation server has a ton of data that is not duplicated in personal environments. It is important to be able to work from a backup copy * Blueprints should be updated on a weekly basis and given particular attention at the beginning of the cycle. * When IS issues happen, use the IS stakeholders: Joey, Danilo, Fathi. Platform Blueprints ---------------------------- The number of blueprints that missed the cycle: Android 22 out of 35 Developer Platform 12 out of 22 Infrastructure 5 out of 10 Lava 7 out of 11 Total: 46 out of 78 59% if blueprints scheduled for this cycle were not delivered. * Not included is data from working groups and landing teams Source: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AjEaTwrvj1bidDFtQ… -- David Zinman Linaro Release Manager | Project Manager Linaro.org | Open source software for ARM SoCs

14 years, 1 month

[PATCH] mx53: Fix console due to UART clock parent change

by Fabio Estevam

commit 67ee3dd (mx53: Make PLL2 to be the parent of UART clock) changed UART parent from PLL3 to PLL2. Do not reconfigure PLL2 in order to avoid a messed up console output. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- This applies against Linaro-u-boot-2012.04.2 arch/arm/cpu/armv7/mx5/clock.c | 9 --------- 1 files changed, 0 insertions(+), 9 deletions(-) diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index c7613f0..dfee8e6 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -796,15 +796,6 @@ static int config_periph_clk(u32 ref, u32 freq) while (__raw_readl(&mxc_ccm->cdhipr) != 0) ; - /* Setup PLL2 */ - ret = calc_pll_params(ref, freq, &pll_param); - if (ret != 0) { - printf("Error:Can't find pll parameters: %d\n", - ret); - return ret; - } - config_pll_clk(PLL2_CLOCK, &pll_param); - /* Switch peripheral back */ __raw_writel(new_cbcdr, &mxc_ccm->cbcdr); __raw_writel(old_cbcmr, &mxc_ccm->cbcmr); -- 1.7.1

14 years, 1 month

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev May 2012