Failed boards:

cubie2 sunxi_defconfig : FAILED 1:21.28 cubie2 multi_v7_defconfig : FAILED 1:35.18 cubie2 multi_lpae_defconfig : FAILED 1:22.20 cubox multi_v7_defconfig : FAILED 1:31.33 omap5uevm omap2plus_defconfig : FAILED 1:44.03 omap5uevm multi_v7_defconfig : FAILED 1:54.47 omap5uevm multi_lpae_defconfig : FAILED 1:50.83 snowball u8500_defconfig : FAILED 1:54.82

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:08.33 arndale exynos_defconfig : passed 1:18.13 arndale multi_v7_defconfig : passed 1:37.06 arndale multi_lpae_defconfig : passed 1:20.24 bbb omap2plus_defconfig : passed 1:32.54 bbb multi_v7_defconfig : passed 1:24.47 beaver tegra_defconfig : passed 0:59.25 beaver multi_v7_defconfig : passed 1:00.56 capri bcm_defconfig : passed 0:39.40 capri multi_v7_defconfig : passed 0:41.36 cubie sunxi_defconfig : passed 1:11.83 cubie multi_v7_defconfig : passed 1:43.15 dalmore tegra_defconfig : passed 1:34.98 dalmore multi_v7_defconfig : passed 1:25.79 dalmore multi_lpae_defconfig : passed 1:22.55 hummingboard imx_v6_v7_defconfig : passed 1:27.36 hummingboard multi_v7_defconfig : passed 1:10.71 jetson tegra_defconfig : passed 1:00.84 jetson multi_v7_defconfig : passed 0:56.57 jetson multi_lpae_defconfig : passed 1:00.74 panda omap2plus_defconfig : warnings 1:36.78 panda multi_v7_defconfig : passed 1:52.72 sama5 sama5_defconfig : passed 1:54.75 seaboard tegra_defconfig : passed 1:16.21 seaboard multi_v7_defconfig : passed 1:12.51 snow exynos_defconfig : passed 1:29.02 snow multi_v7_defconfig : passed 1:29.25 snow multi_lpae_defconfig : passed 1:38.10 snowball multi_v7_defconfig : passed 2:36.01 trimslice tegra_defconfig : passed 1:01.97 trimslice multi_v7_defconfig : passed 1:12.50 wandboard imx_v6_v7_defconfig : passed 1:13.71 wandboard multi_v7_defconfig : passed 1:19.06

Offline boards:

Board legend is available at http://arm-soc.lixom.net/boards.html

Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.258744] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.266248] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.272140] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.281110] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.290128] scsi0 : ahci_platform [ 1.293859] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.302552] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.308200] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.316272] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.328747] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.335812] hub 1-0:1.0: USB hub found [ 1.339658] hub 1-0:1.0: 1 port detected [ 1.344723] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.350394] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.358339] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.373732] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.380750] hub 2-0:1.0: USB hub found [ 1.384586] hub 2-0:1.0: 1 port detected [ 1.389613] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.396302] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.404190] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.468572] hub 3-0:1.0: USB hub found [ 1.472410] hub 3-0:1.0: 1 port detected [ 1.477417] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.484135] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.491979] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.553530] hub 4-0:1.0: USB hub found [ 1.557370] hub 4-0:1.0: 1 port detected [ 1.562012] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.649645] No MAC Management Counters available [ 1.654418] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.661041] IP-Config: Failed to open eth0 [ 1.665167] IP-Config: No network devices available [ 1.670063] vcc3v3: disabling [ 1.673028] vcc3v0: disabling [ 1.676103] ALSA device list: [ 1.679080] No soundcards found. [ 1.683237] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.258243] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.265750] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.271638] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.280606] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.289600] scsi0 : ahci_platform [ 1.293325] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.302044] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.307693] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.315768] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.328243] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.335286] hub 1-0:1.0: USB hub found [ 1.339142] hub 1-0:1.0: 1 port detected [ 1.344188] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.349858] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.357799] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.373226] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.380251] hub 2-0:1.0: USB hub found [ 1.384079] hub 2-0:1.0: 1 port detected [ 1.389086] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.395770] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.403654] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.468108] hub 3-0:1.0: USB hub found [ 1.471962] hub 3-0:1.0: 1 port detected [ 1.476959] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.483676] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.491517] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.553036] hub 4-0:1.0: USB hub found [ 1.556880] hub 4-0:1.0: 1 port detected [ 1.561524] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.649097] No MAC Management Counters available [ 1.653868] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.660498] IP-Config: Failed to open eth0 [ 1.664620] IP-Config: No network devices available [ 1.669508] vcc3v3: disabling [ 1.672474] vcc3v0: disabling [ 1.675552] ALSA device list: [ 1.678529] No soundcards found. [ 1.682655] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: -------------------------------------------------

[ 0.889799] usb1-vbus: 5000 mV [ 0.893236] usb2-vbus: 5000 mV [ 0.965164] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.972648] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.978544] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.987512] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.996415] scsi0 : ahci_platform [ 1.000052] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008268] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.013867] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.021716] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045186] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052156] hub 1-0:1.0: USB hub found [ 1.055998] hub 1-0:1.0: 1 port detected [ 1.060472] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066112] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.073950] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095128] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102005] hub 2-0:1.0: USB hub found [ 1.105831] hub 2-0:1.0: 1 port detected [ 1.110277] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.116950] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.124764] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.189943] hub 3-0:1.0: USB hub found [ 1.193731] hub 3-0:1.0: 1 port detected [ 1.198226] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.204859] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.212718] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.279942] hub 4-0:1.0: USB hub found [ 1.283739] hub 4-0:1.0: 1 port detected [ 1.288088] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.375154] ata1: SATA link down (SStatus 0 SControl 300) [ 1.391457] No MAC Management Counters available [ 1.396226] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.402817] IP-Config: Failed to open eth0 [ 1.406939] IP-Config: No network devices available [ 1.411817] vcc3v3: disabling [ 1.414781] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.233472] SPEAr-ehci: EHCI SPEAr driver [ 1.237578] tegra-ehci: Tegra EHCI driver [ 1.241701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.247878] ohci-pci: OHCI PCI platform driver [ 1.252375] ohci-platform: OHCI generic platform driver [ 1.257679] ohci-omap3: OHCI OMAP3 driver [ 1.261769] SPEAr-ohci: OHCI SPEAr driver [ 1.266477] usbcore: registered new interface driver usb-storage [ 1.273864] mousedev: PS/2 mouse device common for all mice [ 1.280751] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.289997] i2c /dev entries driver [ 1.296103] usbcore: registered new interface driver uvcvideo [ 1.301858] USB Video Class driver (1.1.1) [ 1.305953] gspca_main: v2.14.0 registered [ 1.313030] orion_wdt: Initial timeout 25 sec [ 1.318400] sdhci: Secure Digital Host Controller Interface driver [ 1.324563] sdhci: Copyright(c) Pierre Ossman [ 1.329541] Synopsys Designware Multimedia Card Interface Driver [ 1.335883] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.342234] usbcore: registered new interface driver usbhid [ 1.347795] usbhid: USB HID core driver [ 1.352629] ata1: SATA link down (SStatus 0 SControl F300) [ 1.360406] TCP: cubic registered [ 1.363748] NET: Registered protocol family 17 [ 1.368201] can: controller area network core (rev 20120528 abi 9) [ 1.374434] NET: Registered protocol family 29 [ 1.378874] can: raw protocol (rev 20120528) [ 1.383118] can: broadcast manager protocol (rev 20120528 t) [ 1.388770] can: netlink gateway (rev 20130117) max_hops=1 [ 1.394626] Key type dns_resolver registered [ 1.399078] ThumbEE CPU extension supported. [ 1.403352] Registering SWP/SWPB emulation handler [ 1.408115] PJ4 iWMMXt v2 coprocessor enabled. [ 1.413631] USB Power: 5000 mV [ 1.417132] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-04 18:26:06 UTC (1401906366) [ 1.427590] ALSA device list: [ 1.430565] No soundcards found. [ 1.434489] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 47.642601] can: raw protocol (rev 20120528) [ 47.642604] can: broadcast manager protocol (rev 20120528 t) [ 47.642611] can: netlink gateway (rev 20130117) max_hops=1 [ 47.642910] Key type dns_resolver registered [ 47.642984] omap_vc_init_channel: No PMIC info for vdd_core [ 47.642986] omap_vp_init: No PMIC info for vdd_core [ 47.642990] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.642993] omap_vp_init: No PMIC info for vdd_mm [ 47.642996] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.642998] omap_vp_init: No PMIC info for vdd_mpu [ 47.643302] ThumbEE CPU extension supported. [ 47.643312] Registering SWP/SWPB emulation handler [ 47.714660] palmas 0-0048: Irq flag is 0x00000000 [ 47.720561] mmc0: new high speed MMC card at address 0001 [ 47.726454] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.731294] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.737589] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.744446] mmcblk0: unknown partition table [ 47.749761] mmcblk0boot1: unknown partition table [ 47.755411] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.760794] mmcblk0boot0: unknown partition table [ 47.768146] smps123: 600 <--> 1500 mV at 1060 mV [ 47.774249] smps45: 600 <--> 1310 mV at 1030 mV [ 47.780661] smps6: 1200 mV [ 47.784659] smps7: 1800 mV [ 47.788765] smps8: 600 <--> 1310 mV at 1040 mV [ 47.794498] smps9: failed to get the current voltage [ 47.799738] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.811798] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.937031] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.082041] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.088124] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.095563] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.102423] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.110112] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.123497] ALSA device list: [ 48.126594] No soundcards found. [ 48.130692] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------

[ 48.081101] can: raw protocol (rev 20120528) [ 48.081104] can: broadcast manager protocol (rev 20120528 t) [ 48.081111] can: netlink gateway (rev 20130117) max_hops=1 [ 48.081386] Key type dns_resolver registered [ 48.081454] omap_vc_init_channel: No PMIC info for vdd_core [ 48.081457] omap_vp_init: No PMIC info for vdd_core [ 48.081461] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.081463] omap_vp_init: No PMIC info for vdd_mm [ 48.081466] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.081468] omap_vp_init: No PMIC info for vdd_mpu [ 48.081771] ThumbEE CPU extension supported. [ 48.081780] Registering SWP/SWPB emulation handler [ 48.152838] palmas 0-0048: Irq flag is 0x00000000 [ 48.159227] mmc0: new high speed MMC card at address 0001 [ 48.165132] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.169966] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.176244] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.183110] mmcblk0: unknown partition table [ 48.188454] mmcblk0boot1: unknown partition table [ 48.193634] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.199452] mmcblk0boot0: unknown partition table [ 48.205645] smps123: 600 <--> 1500 mV at 1060 mV [ 48.211831] smps45: 600 <--> 1310 mV at 1030 mV [ 48.218252] smps6: 1200 mV [ 48.222231] smps7: 1800 mV [ 48.226384] smps8: 600 <--> 1310 mV at 1040 mV [ 48.232129] smps9: failed to get the current voltage [ 48.237369] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.249430] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.375523] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.382652] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.388724] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.396156] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.403002] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.410673] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.424011] ALSA device list: [ 48.427119] No soundcards found. [ 48.431108] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.560535] NET: Registered protocol family 15 [ 2.560711] Key type dns_resolver registered [ 2.560803] omap_vc_init_channel: No PMIC info for vdd_core [ 2.560806] omap_vp_init: No PMIC info for vdd_core [ 2.560814] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.560817] omap_vp_init: No PMIC info for vdd_mm [ 2.560825] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.560827] omap_vp_init: No PMIC info for vdd_mpu [ 2.561365] ThumbEE CPU extension supported. [ 2.561381] Registering SWP/SWPB emulation handler [ 2.561385] SmartReflex Class3 initialized [ 2.663153] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.671121] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.677675] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.679415] palmas 0-0048: Irq flag is 0x00000000 [ 2.691453] mmcblk0: unknown partition table [ 2.697846] mmcblk0boot1: unknown partition table [ 2.704573] mmcblk0boot0: unknown partition table [ 2.710550] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.760901] smps123: 600 <--> 1500 mV at 1060 mV [ 2.767980] smps45: 600 <--> 1310 mV at 1030 mV [ 2.775347] smps6: 1200 mV [ 2.780025] smps7: 1800 mV [ 2.784969] smps8: 600 <--> 1310 mV at 1040 mV [ 2.791435] smps9: failed to get the current voltage [ 2.797422] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.811722] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.820549] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.827567] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.833612] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.842730] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.852065] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.859004] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.867490] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.876117] sr_init: No PMIC hook to init smartreflex [ 2.881638] sr_init: platform driver register failed for SR [ 2.909809] pbias_mmc_omap5: disabling [ 2.915275] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: -------------------------------------------------

[ 3.597808] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.605712] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.617645] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.624969] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.636444] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.644958] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.656890] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.664215] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675689] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.683502] HS USB OTG: no transceiver configured [ 3.688201] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.696044] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.703979] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.715911] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.723236] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.734710] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.743225] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.755157] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.762481] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.773956] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.781768] HS USB OTG: no transceiver configured [ 3.786468] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.794311] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.802246] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.814147] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.821472] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.832946] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.841491] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.853424] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.860748] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872222] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.880004] HS USB OTG: no transceiver configured [ 3.884735] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.892578] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.900512] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.912445] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.919738] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.931213] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout