Automated DT boot report for various ARM defconfigs.

Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo').

Tree/Branch: next-20130906 Git describe: next-20130906 Commit: 1a4082f8c3 Add linux-next specific files for 20130906

Failed boot tests (console logs at the end) =========================================== exynos5250-arndale: FAIL: arm-exynos_defconfig am335x-bone,am335xbone: FAIL: arm-omap2plus_defconfig omap4-panda-es: FAIL: arm-omap2plus_defconfig

Full Report ===========

arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard PASS: 0 min 18.2 sec imx6q-wandboard PASS: 0 min 16.2 sec

arm-multi_v7_defconfig ---------------------- omap4-panda-es PASS: 1 min 27.2 sec omap3-beagle-xm PASS: 1 min 2.6 sec sun4i-a10-cubieboard PASS: 0 min 15.8 sec am335x-bone,am335xboneb PASS: 0 min 37.1 sec am335x-bone,am335xbone PASS: 0 min 35.5 sec omap3-tobi,3530overo PASS: 0 min 22.8 sec omap4-panda PASS: 1 min 3.4 sec imx6dl-wandboard PASS: 0 min 18.5 sec imx6q-wandboard PASS: 0 min 16.9 sec omap3-tobi,3730storm PASS: 0 min 22.2 sec omap3-beagle PASS: 1 min 16.5 sec

arm-exynos_defconfig -------------------- exynos5250-arndale FAIL: 0 min 0.0 sec

arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 0 min 59.7 sec am335x-bone,am335xboneb PASS: 0 min 27.3 sec am335x-bone,am335xbone FAIL: 0 min 0.0 sec omap3-tobi,3530overo PASS: 0 min 24.3 sec omap4-panda PASS: 1 min 5.4 sec omap4-panda-es FAIL: 0 min 0.0 sec omap3-tobi,3730storm PASS: 0 min 24.0 sec omap3-beagle PASS: 1 min 0.8 sec

Console logs for failures =========================

arm-exynos_defconfig --------------------

exynos5250-arndale: FAIL: last 24 lines of boot log: ----------------------------------------------------

Connected to arndale console [channel connected] (~$quit to exit) (user:khilman) is already connected

~$hardreset

Command(arndale console)> hardreset (user:jenkins) Reboot arndale Reboot: arndale ; phidget 2 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL

arm-omap2plus_defconfig -----------------------

am335x-bone,am335xbone: FAIL: last 24 lines of boot log: --------------------------------------------------------

Connected.

Disconnected. No NAND device found!!! 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment

musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 1 ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL

omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------

OMAP4460 ES1.1 Bypassing DPLL failed 4a008180 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img

U-Boot 2013.04 (May 24 2013 - 14:00:03)

CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment

In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 3  2  1 ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL