Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160414/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:29.30 bbb arm-omap2plus_defconfig : FAILED 1:54.01 bbb arm-multi_v7_defconfig : FAILED 1:55.86 bbb arm-multi_v7_nosmp_defconfig : FAILED 1:53.47 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.22 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.86 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:49.60 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:00.51 beaver arm-tegra_defconfig : FAILED 1:46.04 beaver arm-multi_v7_defconfig : FAILED 1:56.17 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:54.86 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.21 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.53 cosmic arm-multi_v7_defconfig : FAILED 2:13.20 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:03.36 dalmore arm-tegra_defconfig : FAILED 1:51.38 dalmore arm-multi_v7_defconfig : FAILED 2:06.68 dalmore arm-multi_lpae_defconfig : FAILED 2:07.37 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:52.88 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.74 pi arm-multi_v7_defconfig : FAILED 1:53.48 pi arm-multi_lpae_defconfig : FAILED 1:52.72 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.63 snowball arm-u8500_defconfig : FAILED 1:58.77 snowball arm-multi_v7_defconfig : FAILED 2:14.58 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:00.34
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:10.95 arndale arm-exynos_defconfig : passed 1:33.42 arndale arm-multi_v7_defconfig : warnings 1:32.83 arndale arm-multi_lpae_defconfig : warnings 1:24.06 capri arm-bcm_defconfig : passed 1:04.93 capri arm-multi_v7_defconfig : warnings 0:48.34 capri arm-multi_v7_nosmp_defconfig : warnings 0:56.37 chitra powerpc-pasemi_defconfig : passed 1:54.94 chitra powerpc-ppc64_defconfig : passed 2:05.01 colibri-vf61 arm-imx_v6_v7_defconfig : warnings 1:13.57 colibri-vf61 arm-multi_v7_defconfig : warnings 1:22.67 colibri-vf61 arm-multi_v7_nosmp_defconfig : warnings 1:17.55 colombus arm-sunxi_defconfig : passed 2:39.66 colombus arm-multi_v7_defconfig : warnings 2:48.51 colombus arm-multi_lpae_defconfig : warnings 2:37.53 cubie arm-sunxi_defconfig : passed 0:59.97 cubie arm-multi_v7_defconfig : warnings 0:54.18 cubie arm-multi_v7_nosmp_defconfig : warnings 0:59.26 cubie2 arm-sunxi_defconfig : passed 0:50.16 cubie2 arm-multi_v7_defconfig : warnings 1:00.78 cubie2 arm-multi_lpae_defconfig : warnings 0:59.16 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:56.50 cubox arm-multi_v7_defconfig : warnings 1:14.35 cubox arm-mvebu_v7_defconfig : passed 1:12.78 cubox arm-multi_v7_nosmp_defconfig : warnings 1:15.68 hummingboard arm-imx_v6_v7_defconfig : passed 1:37.28 hummingboard arm-multi_v7_defconfig : warnings 1:25.21 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:09.83 jetsontk1 arm-tegra_defconfig : warnings 1:34.44 jetsontk1 arm-multi_v7_defconfig : warnings 1:34.28 jetsontk1 arm-multi_lpae_defconfig : warnings 1:48.68 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:37.66 pandaes arm-omap2plus_defconfig : warnings 1:39.62 pandaes arm-multi_v7_defconfig : passed 1:50.59 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:43.16 pi arm-exynos_defconfig : passed 2:09.73 pi arm-multi_v7_nosmp_defconfig : warnings 2:12.26 pit arm-exynos_defconfig : passed 2:10.84 pit arm-multi_v7_defconfig : warnings 2:17.44 pit arm-multi_lpae_defconfig : warnings 2:25.06 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.89 seattle arm64-defconfig : warnings 2:17.28 snow arm-exynos_defconfig : passed 2:14.63 snow arm-multi_v7_defconfig : warnings 2:20.18 snow arm-multi_lpae_defconfig : warnings 1:59.71 socfpga arm-socfpga_defconfig : warnings 1:11.87 socfpga arm-multi_v7_defconfig : warnings 1:18.47 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:37.91 trimslice arm-tegra_defconfig : warnings 2:40.47 trimslice arm-multi_v7_defconfig : warnings 3:09.65 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:44.37 wandboard arm-imx_v6_v7_defconfig : passed 2:23.80 wandboard arm-multi_v7_defconfig : warnings 1:17.48 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:11.56
Offline boards:
omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.37 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:18.47 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:30.21 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:26.14 parallella arm-multi_v7_defconfig : OFFLINE 2:25.34 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.56 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:48.43 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.33 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 1:00.09 sama5 arm-sama5_defconfig : OFFLINE 2:21.61 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:22.34 seaboard arm-tegra_defconfig : OFFLINE 2:17.74 seaboard arm-multi_v7_defconfig : OFFLINE 2:28.62 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.82
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 2.233438] [c1039560] *pgd=4100041e(bad) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 2.245677] Modules linked in: [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fa840, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc3-next-20160414 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b46c>] (show_stack+0x10/0x14) [ 0.000000] [<c030b46c>] (show_stack) from [<c0335f24>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335f24>] (__warn) from [<c0335f74>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335f74>] (warn_slowpath_fmt) from [<c0f04138>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f04138>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x974) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518656 [ 0.000000] Kernel command line: console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw
[PYBOOT] [arndale 02:26]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:27]: got exception: timeout ~$off
[PYBOOT] [arndale 02:28]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.638451] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.648301] ledtrig-cpu: registered to indicate activity on CPUs [ 1.655513] usbcore: registered new interface driver usbhid [ 1.661436] usbhid: USB HID core driver [ 1.672955] NET: Registered protocol family 10 [ 1.679471] sit: IPv6 over IPv4 tunneling driver [ 1.685560] NET: Registered protocol family 17 [ 1.690324] can: controller area network core (rev 20120528 abi 9) [ 1.696975] NET: Registered protocol family 29 [ 1.701697] can: raw protocol (rev 20120528) [ 1.706215] can: broadcast manager protocol (rev 20120528 t) [ 1.712210] can: netlink gateway (rev 20130117) max_hops=1 [ 1.718938] Key type dns_resolver registered [ 1.723817] omap_voltage_late_init: Voltage driver support not added [ 1.732138] ThumbEE CPU extension supported. [ 1.736759] Registering SWP/SWPB emulation handler [ 1.780780] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.787322] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.795041] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.803770] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811682] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819550] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827359] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.834694] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.843430] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.851361] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.861051] mmc1: new high speed MMC card at address 0001 [ 1.868284] hctosys: unable to open rtc device (rtc0) [ 1.881266] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.887255] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.894313] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.903145] mmcblk1: p1 p2 [ 1.908923] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:54]: got exception: timeout ~$off
[PYBOOT] [bbb 01:55]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.304620] sdhci: Secure Digital Host Controller Interface driver [ 1.311159] sdhci: Copyright(c) Pierre Ossman [ 1.316927] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.381896] Synopsys Designware Multimedia Card Interface Driver [ 1.389172] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.398086] ledtrig-cpu: registered to indicate activity on CPUs [ 1.404932] usbcore: registered new interface driver usbhid [ 1.410816] usbhid: USB HID core driver [ 1.419808] NET: Registered protocol family 10 [ 1.426149] sit: IPv6 over IPv4 tunneling driver [ 1.432027] NET: Registered protocol family 17 [ 1.436750] can: controller area network core (rev 20120528 abi 9) [ 1.443345] NET: Registered protocol family 29 [ 1.448028] can: raw protocol (rev 20120528) [ 1.452530] can: broadcast manager protocol (rev 20120528 t) [ 1.458497] can: netlink gateway (rev 20130117) max_hops=1 [ 1.464970] Key type dns_resolver registered [ 1.469804] omap_voltage_late_init: Voltage driver support not added [ 1.477582] ThumbEE CPU extension supported. [ 1.489884] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.497503] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.505455] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.513216] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.520897] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.528572] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.535853] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.543448] hctosys: unable to open rtc device (rtc0) [ 1.554048] Waiting for root device /dev/mmcblk0p2... [ 1.591214] mmc1: new high speed MMC card at address 0001 [ 1.597666] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.602731] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.609211] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.617639] mmcblk1: p1 p2
[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:51]: got exception: timeout ~$off
[PYBOOT] [bbb 01:52]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.070289] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.076408] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.082736] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.089612] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.099205] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.108704] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.115721] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.158998] ledtrig-cpu: registered to indicate activity on CPUs [ 2.167687] oprofile: using arm/armv7 [ 2.172669] Initializing XFRM netlink socket [ 2.177788] NET: Registered protocol family 10 [ 2.188680] sit: IPv6 over IPv4 tunneling driver [ 2.197565] NET: Registered protocol family 17 [ 2.202493] NET: Registered protocol family 15 [ 2.207726] Key type dns_resolver registered [ 2.212634] omap_voltage_late_init: Voltage driver support not added [ 2.219371] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.227838] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.238156] ThumbEE CPU extension supported. [ 2.242802] Registering SWP/SWPB emulation handler [ 2.247822] SmartReflex Class3 initialized [ 2.321233] mmc1: new high speed MMC card at address 0001 [ 2.333180] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.340641] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.348918] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.355924] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.367943] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.375404] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.386178] hctosys: unable to open rtc device (rtc0) [ 2.391619] sr_init: No PMIC hook to init smartreflex [ 2.397321] sr_init: platform driver register failed for SR [ 2.442375] mmcblk1: p1 p2 [ 2.460667] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.192645] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.199720] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.225136] rtc-ds1307 2-006f: SET TIME! [ 2.230885] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.237554] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 2.245864] rtc-ds1307 2-006f: 64 bytes nvram [ 2.250465] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.258627] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.264408] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.272635] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.281791] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.288684] hub 1-0:1.0: USB hub found [ 2.292646] hub 1-0:1.0: 1 port detected [ 2.297029] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.302789] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.310871] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.319897] hub 2-0:1.0: USB hub found [ 2.323842] hub 2-0:1.0: 1 port detected [ 2.329933] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.399669] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.416724] aic_dvdd_fixed: disabling [ 2.421309] Waiting for root device /dev/mmcblk0p1... [ 2.451684] mmc1: new high speed MMC card at address 0001 [ 2.457659] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.462545] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.468887] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.475768] mmcblk1: p1 [ 2.604627] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.634654] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.662980] hub 2-1:1.0: USB hub found [ 2.666982] hub 2-1:1.0: 4 ports detected [ 2.759005] hub 1-1:1.0: USB hub found [ 2.762983] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.198209] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.205278] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.230091] rtc-ds1307 2-006f: SET TIME! [ 2.235859] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.242524] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 2.250828] rtc-ds1307 2-006f: 64 bytes nvram [ 2.255432] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.263605] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.269378] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.277604] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.286752] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.293628] hub 1-0:1.0: USB hub found [ 2.297597] hub 1-0:1.0: 1 port detected [ 2.302004] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.307771] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.315876] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.324880] hub 2-0:1.0: USB hub found [ 2.328830] hub 2-0:1.0: 1 port detected [ 2.334899] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.402332] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.420049] aic_dvdd_fixed: disabling [ 2.424775] Waiting for root device /dev/mmcblk0p1... [ 2.446653] mmc1: new high speed MMC card at address 0001 [ 2.452622] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.457520] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.463861] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.470746] mmcblk1: p1 [ 2.609579] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.639606] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.667982] hub 2-1:1.0: USB hub found [ 2.671989] hub 2-1:1.0: 4 ports detected [ 2.764010] hub 1-1:1.0: USB hub found [ 2.767991] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.029368] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.036413] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.062163] rtc-ds1307 2-006f: SET TIME! [ 2.067795] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.074458] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 2.082758] rtc-ds1307 2-006f: 64 bytes nvram [ 2.087334] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.094693] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.100461] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.108667] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.117803] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.124536] hub 1-0:1.0: USB hub found [ 2.128488] hub 1-0:1.0: 1 port detected [ 2.132806] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.138564] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.146636] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.155509] hub 2-0:1.0: USB hub found [ 2.159455] hub 2-0:1.0: 1 port detected [ 2.164737] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.230413] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.243420] aic_dvdd_fixed: disabling [ 2.248840] Waiting for root device /dev/mmcblk0p1... [ 2.293708] mmc1: new high speed MMC card at address 0001 [ 2.299586] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.304427] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.310717] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.317509] mmcblk1: p1 [ 2.456702] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.471723] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.498746] hub 2-1:1.0: USB hub found [ 2.502712] hub 2-1:1.0: 4 ports detected [ 2.594741] hub 1-1:1.0: USB hub found [ 2.598710] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:58]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:59]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.694851] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.701170] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.708040] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.718447] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.723287] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.729603] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.736453] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.746047] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.755554] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.762611] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.809317] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.815623] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.822503] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.832104] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.841608] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.848657] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.854781] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.861100] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.867947] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.877540] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.887053] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.894091] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.939468] hctosys: unable to open rtc device (rtc0) [ 2.944763] sr_init: No PMIC hook to init smartreflex [ 2.950284] sr_init: platform driver register failed for SR [ 2.990992] mmc1: new high speed MMC card at address 0001 [ 2.997847] aic_dvdd_fixed: disabling [ 2.998976] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.999673] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 3.000415] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 3.010139] mmcblk1: p1 [ 3.021924] ldousb: disabling [ 3.027942] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.580029] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.586549] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.593418] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.599002] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.606100] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.616099] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.628187] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.634806] [drm] No driver support for vblank timestamp query. [ 3.640747] drm drm: No connectors reported connected with modes [ 3.646754] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.673514] Console: switching to colour frame buffer device 128x48 [ 3.685440] drm drm: fb0: frame buffer device [ 3.703755] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.714612] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.721074] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.726484] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.734318] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.748767] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.755637] hub 1-0:1.0: USB hub found [ 3.759408] hub 1-0:1.0: 1 port detected [ 3.764372] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.769783] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.777528] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.793758] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.800910] hub 2-0:1.0: USB hub found [ 3.804677] hub 2-0:1.0: 1 port detected [ 3.813455] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.827026] vdd_sata,avdd_plle: disabling [ 3.831849] usb1_vbus: disabling [ 3.835929] Waiting for root device /dev/mmcblk0p1... [ 4.113762] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.057373] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 76.263759] random: nonblocking pool is initialized
[PYBOOT] [beaver 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:54]: got exception: timeout ~$off
[PYBOOT] [beaver 01:55]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.472449] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.479402] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.485918] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.492750] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.498334] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.504941] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.514933] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.525303] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.531920] [drm] No driver support for vblank timestamp query. [ 3.537852] drm drm: No connectors reported connected with modes [ 3.543852] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.563239] Console: switching to colour frame buffer device 128x48 [ 3.575016] drm drm: fb0: frame buffer device [ 3.579452] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.589357] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.595806] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.601211] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.608930] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.622846] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.629207] hub 1-0:1.0: USB hub found [ 3.632973] hub 1-0:1.0: 1 port detected [ 3.637623] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.643030] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.650696] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.662843] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.669154] hub 2-0:1.0: USB hub found [ 3.672913] hub 2-0:1.0: 1 port detected [ 3.680379] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.693519] vdd_sata,avdd_plle: disabling [ 3.697907] usb1_vbus: disabling [ 3.701803] Waiting for root device /dev/mmcblk0p1... [ 3.982850] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.921396] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:53]: got exception: timeout ~$off
[PYBOOT] [beaver 01:54]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.694188] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.701144] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.706748] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.714280] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.724278] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.737185] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.743809] [drm] No driver support for vblank timestamp query. [ 3.749808] drm drm: No connectors reported connected with modes [ 3.755822] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.781755] Console: switching to colour frame buffer device 128x48 [ 3.793580] drm drm: fb0: frame buffer device [ 3.820779] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.830041] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.836522] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.841956] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.849928] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.870784] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.878504] hub 1-0:1.0: USB hub found [ 3.882283] hub 1-0:1.0: 1 port detected [ 3.887094] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.892522] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.900397] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.920782] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.928380] hub 2-0:1.0: USB hub found [ 3.932154] hub 2-0:1.0: 1 port detected [ 3.940448] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.959063] vdd_sata,avdd_plle: disabling [ 3.963484] usb1_vbus: disabling [ 3.966899] ALSA device list: [ 3.969856] #0: NVIDIA Tegra Beaver [ 3.974097] Waiting for root device /dev/mmcblk0p1... [ 4.250786] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.236176] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:44]: got exception: timeout ~$off
[PYBOOT] [beaver 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 42.008404] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 42.022771] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.612842] random: dd urandom read with 59 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 90.024873] eth0: device MAC address 02:7e:c9:29:f0:eb [ 90.180575] RX IPC Checksum Offload disabled [ 90.185207] No MAC Management Counters available [ 90.191004] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/02:7e:c9:29:f0:eb Sending on LPF/eth0/02:7e:c9:29:f0:eb Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.479196] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.553428] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.563758] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.637994] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.648318] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.722495] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.732821] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.807044] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.817373] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.891555] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.901883] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.976110] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.986437] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.060628] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.070954] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.145182] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.155502] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.229727] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.240049] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.314276] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.324592] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.398815] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.409138] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.483366] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.493691] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.567921] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.578245] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.652420] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.662748] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.736977] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.747301] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.821474] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.831793] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.182929] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.256904] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.266980] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.340954] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.351031] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.425006] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.435111] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.509088] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.519184] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.593171] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.603241] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.677217] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.687301] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.761286] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.771353] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.845331] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.855405] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.929379] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.939455] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.013436] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.023506] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.097518] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.107592] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.181568] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.191644] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.265618] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.275695] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.349670] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.359747] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.433736] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.443816] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.517796] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.527895] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:11]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:12]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.943405] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.017312] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.027369] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.101286] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.111344] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.185257] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.195316] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.269228] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.279281] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.353194] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.363256] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.437169] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.447228] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.521140] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.531205] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.605115] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.615160] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.689070] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.699116] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.773024] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.783071] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.856979] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.867028] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.940934] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.950984] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.024900] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.034957] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.108870] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.118922] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.192837] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.202895] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.276805] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.286859] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:01]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:02]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.888307] can: netlink gateway (rev 20130117) max_hops=1 [ 2.895272] Key type dns_resolver registered [ 2.901759] ThumbEE CPU extension supported. [ 2.906075] Registering SWP/SWPB emulation handler [ 2.927177] usb1_vbus: supplied by vdd-sys-5v0 [ 2.937722] usb2_vbus: supplied by vdd-sys-5v0 [ 2.955640] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.979348] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.986117] [drm] No driver support for vblank timestamp query. [ 3.004175] mmc1: new high speed MMC card at address 0001 [ 3.014323] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.021191] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.029585] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.038372] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.048735] mmcblk1: p1 [ 3.166841] Console: switching to colour frame buffer device 240x75 [ 3.253789] drm drm: fb0: frame buffer device [ 3.276779] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.291691] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.297272] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.306021] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.321816] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.332103] hub 1-0:1.0: USB hub found [ 3.336112] hub 1-0:1.0: 1 port detected [ 3.347369] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.361961] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.425416] dvdd_ts: disabling [ 3.428629] usb1_vbus: disabling [ 3.431943] vdd_cam_1v8_reg: disabling [ 3.439422] Waiting for root device /dev/mmcblk0p1... [ 3.646818] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.630025] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.066782] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:05]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:06]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.909559] can: netlink gateway (rev 20130117) max_hops=1 [ 2.916552] Key type dns_resolver registered [ 2.923057] ThumbEE CPU extension supported. [ 2.927377] Registering SWP/SWPB emulation handler [ 2.942951] usb1_vbus: supplied by vdd-sys-5v0 [ 2.952373] usb2_vbus: supplied by vdd-sys-5v0 [ 2.970554] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.991934] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.998712] [drm] No driver support for vblank timestamp query. [ 3.022932] mmc1: new high speed MMC card at address 0001 [ 3.033219] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.040382] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.048940] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.057353] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.067223] mmcblk1: p1 [ 3.179008] Console: switching to colour frame buffer device 240x75 [ 3.266112] drm drm: fb0: frame buffer device [ 3.288033] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.302938] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.308539] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.317274] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.333068] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.343484] hub 1-0:1.0: USB hub found [ 3.347473] hub 1-0:1.0: 1 port detected [ 3.358140] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.372946] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.434700] dvdd_ts: disabling [ 3.437913] usb1_vbus: disabling [ 3.441170] vdd_cam_1v8_reg: disabling [ 3.448600] Waiting for root device /dev/mmcblk0p1... [ 3.663421] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.651798] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.478141] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:04]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:06]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.428060] can: raw protocol (rev 20120528) [ 2.432375] can: broadcast manager protocol (rev 20120528 t) [ 2.438093] can: netlink gateway (rev 20130117) max_hops=1 [ 2.444668] Key type dns_resolver registered [ 2.449661] ThumbEE CPU extension supported. [ 2.471675] usb1_vbus: supplied by vdd-sys-5v0 [ 2.479957] usb2_vbus: supplied by vdd-sys-5v0 [ 2.494189] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.516885] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.523565] [drm] No driver support for vblank timestamp query. [ 2.689460] Console: switching to colour frame buffer device 240x75 [ 2.777038] drm drm: fb0: frame buffer device [ 2.781604] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.792492] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.798034] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.806229] mmc1: new high speed MMC card at address 0001 [ 2.812914] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.819212] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.824242] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.830363] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.838994] hub 1-0:1.0: USB hub found [ 2.842974] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.849169] hub 1-0:1.0: 1 port detected [ 2.853488] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.863421] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.871449] mmcblk1: p1 [ 2.879601] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.920215] dvdd_ts: disabling [ 2.923371] usb1_vbus: disabling [ 2.926658] vdd_cam_1v8_reg: disabling [ 2.932037] Waiting for root device /dev/mmcblk0p1... [ 3.167213] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.119398] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.924410] can: netlink gateway (rev 20130117) max_hops=1 [ 2.930794] Bluetooth: RFCOMM socket layer initialized [ 2.936022] Bluetooth: RFCOMM ver 1.11 [ 2.939936] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.945359] Bluetooth: BNEP socket layer initialized [ 2.950415] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.956415] Bluetooth: HIDP socket layer initialized [ 2.963239] Key type dns_resolver registered [ 2.972753] Registering SWP/SWPB emulation handler [ 2.993877] usb1_vbus: supplied by vdd-sys-5v0 [ 3.004141] usb2_vbus: supplied by vdd-sys-5v0 [ 3.021159] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.049465] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.056128] [drm] No driver support for vblank timestamp query. [ 3.233566] Console: switching to colour frame buffer device 240x75 [ 3.320802] drm drm: fb0: frame buffer device [ 3.349762] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.358904] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.364627] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.374041] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.399690] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.413857] hub 1-0:1.0: USB hub found [ 3.417879] hub 1-0:1.0: 1 port detected [ 3.431377] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.444633] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.528827] dvdd_ts: disabling [ 3.532188] usb1_vbus: disabling [ 3.535507] vdd_cam_1v8_reg: disabling [ 3.540162] ALSA device list: [ 3.543158] #0: NVIDIA Tegra Dalmore [ 3.548913] Waiting for root device /dev/mmcblk0p1... [ 3.739689] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.762311] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:49]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:50]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.701442] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.732572] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.733505] s5p-secss 10830000.sss: s5p-sss driver registered [ 1.738582] usbcore: registered new interface driver usbhid [ 1.744710] usbhid: USB HID core driver [ 1.753487] NET: Registered protocol family 10 [ 1.754088] sit: IPv6 over IPv4 tunneling driver [ 1.757312] NET: Registered protocol family 17 [ 1.761355] NET: Registered protocol family 15 [ 1.765795] Key type dns_resolver registered [ 1.770123] Registering SWP/SWPB emulation handler [ 1.775906] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.780369] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.787780] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.816319] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.818090] max98090 1-0010: MAX98090 REVID=0x43 [ 1.820308] max98090 1-0010: use default 2.8v micbias [ 1.830615] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.840161] mmc1: new DDR MMC card at address 0001 [ 1.843351] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.846319] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.857964] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.862167] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.868095] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.874000] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.880515] mmcblk1: p1 p2 [ 1.883757] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.906668] VDD10_HDMI_1.0V: disabling [ 1.907362] vdd_g3d: disabling [ 1.908456] BUCK8_2.8V: disabling [ 1.91b395] ALSA device list: [ 1.914077] #0: Odroid-U3 [ 1.917775] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:51]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.637854] isl29018 7-0044: No cache defaults, reading back from HW [ 1.644208] isl29018 7-0044: Failed to read 1: -6 [ 1.648792] isl29018 7-0044: regmap initialization fails: -6 [ 1.658922] NET: Registered protocol family 10 [ 1.663335] sit: IPv6 over IPv4 tunneling driver [ 1.666928] NET: Registered protocol family 17 [ 1.670927] can: controller area network core (rev 20120528 abi 9) [ 1.677117] NET: Registered protocol family 29 [ 1.681505] can: raw protocol (rev 20120528) [ 1.685735] can: broadcast manager protocol (rev 20120528 t) [ 1.691397] can: netlink gateway (rev 20130117) max_hops=1 [ 1.697110] Key type dns_resolver registered [ 1.701429] ThumbEE CPU extension supported. [ 1.705346] Registering SWP/SWPB emulation handler [ 1.714492] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.719981] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.726339] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.731714] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.741779] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.751380] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.756813] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.767017] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.773191] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.778568] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.788291] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.810469] Waiting for root device /dev/mmcblk0p1... [ 1.814347] mmc0: tuning execution failed: -5 [ 1.818399] mmc0: error -5 whilst initialising MMC card [ 2.682871] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.696224] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.701687] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.708061] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.713444] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:51]: got exception: timeout ~$off
[PYBOOT] [pi 01:52]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.637785] isl29018 7-0044: No cache defaults, reading back from HW [ 1.644141] isl29018 7-0044: Failed to read 1: -6 [ 1.648725] isl29018 7-0044: regmap initialization fails: -6 [ 1.658855] NET: Registered protocol family 10 [ 1.663265] sit: IPv6 over IPv4 tunneling driver [ 1.666861] NET: Registered protocol family 17 [ 1.670860] can: controller area network core (rev 20120528 abi 9) [ 1.677050] NET: Registered protocol family 29 [ 1.681438] can: raw protocol (rev 20120528) [ 1.685668] can: broadcast manager protocol (rev 20120528 t) [ 1.691330] can: netlink gateway (rev 20130117) max_hops=1 [ 1.697045] Key type dns_resolver registered [ 1.701364] ThumbEE CPU extension supported. [ 1.705279] Registering SWP/SWPB emulation handler [ 1.714429] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.719912] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.726272] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.731647] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.741714] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.751302] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.756737] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.766943] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.773116] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.778493] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.788214] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.810384] Waiting for root device /dev/mmcblk0p1... [ 1.814262] mmc0: tuning execution failed: -5 [ 1.818315] mmc0: error -5 whilst initialising MMC card [ 2.682823] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.696189] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.701645] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.708019] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.713402] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:51]: got exception: timeout ~$off
[PYBOOT] [pi 01:52]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
4K (c0f00000 - c1000000) [ 2.025281] mmc2: new high speed SDIO card at address 0001 [ 0.000000] Booting Linux on physical CPU 0x0 [ 2.039577] [c1039560] *pgd=4100041e(bad) [ 0.000000] Linux version 4.6.0-rc3-next-20160414 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Wed Apr 13 22:57:18 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 2.061625] Modules linked in: [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Google Snow [ 0.000000] cma: Reserved 64 MiB at 0xbb800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 523264 [ 0.000000] free_area_init_node: node 0, pgdat c10fa840, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 326656 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc3-next-20160414 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b46c>] (show_stack+0x10/0x14) [ 0.000000] [<c030b46c>] (show_stack) from [<c0335f24>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335f24>] (__warn) from [<c0335f74>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335f74>] (warn_slowpath_fmt) from [<c0f04138>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f04138>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x974) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]---
[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:11]: got exception: timeout ~$off
[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.098785] can: controller area network core (rev 20120528 abi 9) [ 2.105041] NET: Registered protocol family 29 [ 2.109497] can: raw protocol (rev 20120528) [ 2.113769] can: broadcast manager protocol (rev 20120528 t) [ 2.119445] can: netlink gateway (rev 20130117) max_hops=1 [ 2.125488] Key type dns_resolver registered [ 2.129943] ThumbEE CPU extension supported. [ 2.130279] mmc3: new high speed MMC card at address 0001 [ 2.130798] mmcblk3: mmc3:0001 3.53 GiB [ 2.130950] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.131134] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.131317] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.135253] mmcblk3: p1 p2 p3 p4 [ 2.163024] Registering SWP/SWPB emulation handler [ 2.170257] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.177001] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.186218] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.193237] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.200225] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.207214] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.220550] db8500-esram12: disabling [ 2.224426] db8500-esram34: disabling [ 2.228363] V-CSI/DSI: disabling [ 2.231689] mmci-reg: disabling [ 2.235351] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.241333] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.247619] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:12]: got exception: timeout ~$off
[PYBOOT] [snowball 02:13]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.982849] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.990325] ledtrig-cpu: registered to indicate activity on CPUs [ 1.996612] usbcore: registered new interface driver usbhid [ 2.002197] usbhid: USB HID core driver [ 2.009277] NET: Registered protocol family 10 [ 2.064575] sit: IPv6 over IPv4 tunneling driver [ 2.069763] NET: Registered protocol family 17 [ 2.074218] can: controller area network core (rev 20120528 abi 9) [ 2.080444] NET: Registered protocol family 29 [ 2.084899] can: raw protocol (rev 20120528) [ 2.089141] can: broadcast manager protocol (rev 20120528 t) [ 2.094818] can: netlink gateway (rev 20130117) max_hops=1 [ 2.100708] Key type dns_resolver registered [ 2.105133] ThumbEE CPU extension supported. [ 2.160308] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.174011] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.183074] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.190063] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.197052] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.204010] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.215942] db8500-esram12: disabling [ 2.263702] db8500-esram34: disabling [ 2.294464] V-CSI/DSI: disabling [ 2.298675] mmci-reg: disabling [ 2.302246] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.308227] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.329406] Waiting for root device /dev/mmcblk0p4... [ 3.130706] mmc3: new high speed MMC card at address 0001 [ 3.144561] mmcblk3: mmc3:0001 3.53 GiB [ 3.148712] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.159240] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.173767] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.185577] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:58]: got exception: timeout ~$off
[PYBOOT] [snowball 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.537902] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.544281] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.556884] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.567657] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.577606] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.588348] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.611267] NET: Registered protocol family 10 [ 2.616516] sit: IPv6 over IPv4 tunneling driver [ 2.622070] NET: Registered protocol family 17 [ 2.626556] NET: Registered protocol family 35 [ 2.631134] NET: Registered protocol family 37 [ 2.635681] Registering SWP/SWPB emulation handler [ 2.652160] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.664733] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-03-26 03:04:38 UTC (954039878) [ 2.674316] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.681457] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.688476] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.695587] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.709167] db8500-esram12: disabling [ 2.713012] db8500-esram34: disabling [ 2.716918] V-CSI/DSI: disabling [ 2.720245] mmci-reg: disabling [ 2.723541] ALSA device list: [ 2.726501] #0: MOP500-card [ 2.729797] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.735809] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.742034] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:57]: got exception: timeout ~$off
[PYBOOT] [snowball 01:58]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter