Automated DT boot report for various ARM defconfigs.

Tree/Branch: queue Git describe: v3.11.9-7-g95db9b7 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: multi_v7_defconfig

Full Report ===========

omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 53.4 sec am335x-bone PASS: 0 min 26.5 sec omap4-panda PASS: 1 min 2.7 sec omap4-panda-es PASS: 1 min 7.0 sec omap3-tobi,3730storm PASS: 0 min 24.3 sec omap3-tobi,3530overo PASS: 0 min 21.7 sec

tegra_defconfig --------------- tegra30-beaver PASS: 0 min 23.1 sec

imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 15.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 15.6 sec

mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 20.0 sec

multi_v7_defconfig ------------------ tegra30-beaver PASS: 0 min 16.7 sec omap3-beagle-xm PASS: 0 min 50.2 sec armada-370-mirabox PASS: 0 min 20.5 sec am335x-bone PASS: 0 min 33.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec omap4-panda PASS: 1 min 2.4 sec omap4-panda-es FAIL: 3 min 2.2 sec omap3-tobi,3730storm PASS: 0 min 22.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec omap3-tobi,3530overo PASS: 0 min 19.9 sec

sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

Console logs for failures =========================

multi_v7_defconfig ------------------

omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------

[ 1.565551] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 1.571868] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 1.578216] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 1.584533] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.592285] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.601745] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 1.653381] twl_rtc rtc.11: setting system clock to 2013-11-24 05:35:28 UTC (1385271328) [ 1.735351] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.809448] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.820068] mmc0: new high speed SDHC card at address 1234 [ 1.826293] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 1.832672] mmcblk0: p1 p2 [ 1.905731] hub 1-1:1.0: USB hub found [ 1.910003] hub 1-1:1.0: 5 ports detected [ 2.283996] usb 1-1.1: new high-speed USB device number 3 using ehci-omap d[ 15.022460] Freeing unused kernel memory: 468K (c0649000 - c06be000) Starting logging: OK Initializing random number generator... done. Starting network... /bin/sh: can't access tty; job control turned off / #~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 182.24 seconds. # PYBOOT: Result: FAIL