Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v4.4.31-35-g02bf66f/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:46.71 bbb arm-omap2plus_defconfig : FAILED 1:54.70 bbb arm-multi_v7_defconfig : FAILED 1:53.20 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:27.08 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.22 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.64 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:47.04 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:01.24 beaver arm-tegra_defconfig : FAILED 1:44.58 beaver arm-multi_v7_defconfig : FAILED 1:50.90 beaver arm-multi_v7_nosmp_defconfig : FAILED 2:05.90 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.08 dalmore arm-tegra_defconfig : FAILED 1:48.82 dalmore arm-multi_v7_defconfig : FAILED 1:56.35 dalmore arm-multi_lpae_defconfig : FAILED 2:12.78 dalmore arm-multi_v7_nosmp_defconfig : FAILED 2:01.63 hummingboard arm-imx_v6_v7_defconfig : FAILED 1:49.89 hummingboard arm-multi_v7_defconfig : FAILED 2:44.42 hummingboard arm-multi_v7_nosmp_defconfig : FAILED 1:45.46 jetsontx1 arm64-defconfig : NO DTB jetsontx1 arm64-nosmp_defconfig : NO DTB odroidu3 arm-exynos_defconfig : FAILED 1:50.87 odroidu3 arm-multi_v7_defconfig : FAILED 1:50.72 seaboard arm-tegra_defconfig : FAILED 1:57.40 seaboard arm-multi_v7_defconfig : FAILED 3:04.37 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:55.61 snowball arm-u8500_defconfig : FAILED 2:15.38 snowball arm-multi_v7_defconfig : FAILED 2:25.54 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:19.76

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:21.44 arndale arm-exynos_defconfig : warnings 1:37.40 arndale arm-multi_v7_defconfig : passed 1:25.36 arndale arm-multi_lpae_defconfig : passed 1:34.99 capri arm-multi_v7_defconfig : passed 0:51.25 capri arm-multi_v7_nosmp_defconfig : warnings 1:08.47 chitra powerpc-pasemi_defconfig : passed 3:02.86 chitra powerpc-ppc64_defconfig : passed 2:07.91 colombus arm-sunxi_defconfig : passed 2:03.49 colombus arm-multi_v7_defconfig : passed 3:08.56 colombus arm-multi_lpae_defconfig : passed 2:13.18 cosmic arm-imx_v6_v7_defconfig : passed 3:29.34 cosmic arm-multi_v7_defconfig : passed 4:11.97 cosmic arm-multi_v7_nosmp_defconfig : passed 2:45.29 cubie arm-sunxi_defconfig : passed 0:51.81 cubie arm-multi_v7_defconfig : passed 1:02.83 cubie arm-multi_v7_nosmp_defconfig : passed 0:58.59 cubie2 arm-sunxi_defconfig : passed 0:53.41 cubie2 arm-multi_v7_defconfig : passed 1:04.46 cubie2 arm-multi_lpae_defconfig : passed 1:22.65 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:45.51 cubox arm-multi_v7_defconfig : passed 1:20.90 cubox arm-mvebu_v7_defconfig : passed 2:57.36 cubox arm-multi_v7_nosmp_defconfig : passed 1:17.99 jetsontk1 arm-tegra_defconfig : passed 1:33.84 jetsontk1 arm-multi_v7_defconfig : passed 1:43.54 jetsontk1 arm-multi_lpae_defconfig : passed 2:05.56 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:33.00 minnowmax x86-minnowmax_defconfig : passed 2:32.99 omap5uevm arm-omap2plus_defconfig : passed 1:04.51 omap5uevm arm-multi_v7_defconfig : passed 1:10.39 omap5uevm arm-multi_lpae_defconfig : passed 1:15.86 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:38.08 pandaes arm-omap2plus_defconfig : warnings 1:39.31 pandaes arm-multi_v7_defconfig : passed 1:50.05 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:22.88 parallella arm-multi_v7_defconfig : passed 3:00.32 parallella arm-multi_v7_nosmp_defconfig : warnings 2:53.19 pi arm-exynos_defconfig : passed 1:32.05 pi arm-multi_v7_defconfig : passed 1:49.39 pi arm-multi_lpae_defconfig : passed 2:04.32 pi arm-multi_v7_nosmp_defconfig : warnings 1:34.60 pit arm-exynos_defconfig : passed 1:31.89 pit arm-multi_v7_defconfig : passed 1:36.86 pit arm-multi_lpae_defconfig : passed 1:36.64 pit arm-multi_v7_nosmp_defconfig : warnings 1:52.85 seattle arm64-defconfig : passed 2:13.94 seattle arm64-nosmp_defconfig : passed 2:20.65 snow arm-exynos_defconfig : passed 1:08.88 snow arm-multi_v7_defconfig : passed 1:13.19 snow arm-multi_lpae_defconfig : passed 1:23.56 snow arm-multi_v7_nosmp_defconfig : warnings 1:04.01 socfpga arm-socfpga_defconfig : passed 1:18.14 socfpga arm-multi_v7_defconfig : passed 1:30.72 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:30.26 trimslice arm-multi_v7_defconfig : passed 1:56.10 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:33.77 wandboard arm-imx_v6_v7_defconfig : passed 1:11.66 wandboard arm-multi_v7_defconfig : passed 1:18.80 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:29.07

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.47 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:21.25 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:34.41 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:53.28 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:46.54 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:52.39 sama5 arm-sama5_defconfig : OFFLINE 2:15.76 sama5d3-xplained arm-sama5_defconfig : OFFLINE 3:15.54 trimslice arm-tegra_defconfig : OFFLINE 2:16.86

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.116434] dwmmc_exynos 12220000.mmc: No vqmmc regulator found [ 2.149283] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 2.153791] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.160033] ledtrig-cpu: registered to indicate activity on CPUs [ 2.165036] usbcore: registered new interface driver usbhid [ 2.170480] usbhid: USB HID core driver [ 2.176587] NET: Registered protocol family 10 [ 2.179968] sit: IPv6 over IPv4 tunneling driver [ 2.184455] NET: Registered protocol family 17 [ 2.188579] can: controller area network core (rev 20120528 abi 9) [ 2.194771] NET: Registered protocol family 29 [ 2.199166] can: raw protocol (rev 20120528) [ 2.203426] can: broadcast manager protocol (rev 20120528 t) [ 2.209069] can: netlink gateway (rev 20130117) max_hops=1 [ 2.214731] Key type dns_resolver registered [ 2.219049] ThumbEE CPU extension supported. [ 2.224037] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.230489] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.236145] hctosys: unable to open rtc device (rtc0) [ 2.244585] MAIN_DC: disabling [ 2.246154] hdmi-en: disabling [ 2.249555] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.32-rc1-00035-g02bf66f (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Sun Nov 13 06:22:25 PST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c0f70968, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap

[PYBOOT] [arndale 02:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:45]: got exception: timeout ~$off

[PYBOOT] [arndale 02:46]: Done.

========================================================================

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.529738] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.596084] Synopsys Designware Multimedia Card Interface Driver [ 1.603863] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.613451] ledtrig-cpu: registered to indicate activity on CPUs [ 1.620278] usbcore: registered new interface driver usbhid [ 1.626172] usbhid: USB HID core driver [ 1.636848] NET: Registered protocol family 10 [ 1.643336] sit: IPv6 over IPv4 tunneling driver [ 1.649497] NET: Registered protocol family 17 [ 1.654266] can: controller area network core (rev 20120528 abi 9) [ 1.660905] NET: Registered protocol family 29 [ 1.665628] can: raw protocol (rev 20120528) [ 1.670149] can: broadcast manager protocol (rev 20120528 t) [ 1.676143] can: netlink gateway (rev 20130117) max_hops=1 [ 1.682858] Key type dns_resolver registered [ 1.687731] omap_voltage_late_init: Voltage driver support not added [ 1.695873] ThumbEE CPU extension supported. [ 1.700488] Registering SWP/SWPB emulation handler [ 1.714499] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.722248] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.730662] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.738332] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.745927] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.753494] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.760814] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.768990] hctosys: unable to open rtc device (rtc0) [ 1.783740] Waiting for root device /dev/mmcblk1p2... [ 1.818103] mmc1: MAN_BKOPS_EN bit is not set [ 1.824620] mmc1: new high speed MMC card at address 0001 [ 1.831287] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.836491] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.843084] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.851593] mmcblk0: p1 p2

[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:51]: got exception: timeout ~$off

[PYBOOT] [bbb 01:52]: Done.

========================================================================

Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.350326] sdhci: Copyright(c) Pierre Ossman [ 1.356090] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.419267] Synopsys Designware Multimedia Card Interface Driver [ 1.426764] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.435798] ledtrig-cpu: registered to indicate activity on CPUs [ 1.442516] usbcore: registered new interface driver usbhid [ 1.448393] usbhid: USB HID core driver [ 1.457678] NET: Registered protocol family 10 [ 1.464174] sit: IPv6 over IPv4 tunneling driver [ 1.470109] NET: Registered protocol family 17 [ 1.474843] can: controller area network core (rev 20120528 abi 9) [ 1.481438] NET: Registered protocol family 29 [ 1.486134] can: raw protocol (rev 20120528) [ 1.490645] can: broadcast manager protocol (rev 20120528 t) [ 1.496621] can: netlink gateway (rev 20130117) max_hops=1 [ 1.503224] Key type dns_resolver registered [ 1.508001] omap_voltage_late_init: Voltage driver support not added [ 1.515824] ThumbEE CPU extension supported. [ 1.528087] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.535706] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.543491] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.551018] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.558508] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.565983] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.573251] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.580857] hctosys: unable to open rtc device (rtc0) [ 1.591807] Waiting for root device /dev/mmcblk1p2... [ 1.626379] mmc1: MAN_BKOPS_EN bit is not set [ 1.632762] mmc1: new high speed MMC card at address 0001 [ 1.639204] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.644265] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.650742] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.658990] mmcblk0: p1 p2

[PYBOOT] [bbb 02:24]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:25]: got exception: timeout ~$off

[PYBOOT] [bbb 02:26]: Done.

========================================================================

Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.062356] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.068680] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.075552] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.085142] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.094635] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.101650] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.145257] ledtrig-cpu: registered to indicate activity on CPUs [ 2.153422] oprofile: using arm/armv7 [ 2.158630] Initializing XFRM netlink socket [ 2.163708] NET: Registered protocol family 10 [ 2.174166] sit: IPv6 over IPv4 tunneling driver [ 2.182945] NET: Registered protocol family 17 [ 2.187875] NET: Registered protocol family 15 [ 2.193164] Key type dns_resolver registered [ 2.198104] omap_voltage_late_init: Voltage driver support not added [ 2.204842] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.213303] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.223585] ThumbEE CPU extension supported. [ 2.228243] Registering SWP/SWPB emulation handler [ 2.233277] SmartReflex Class3 initialized [ 2.290188] mmc1: MAN_BKOPS_EN bit is not set [ 2.300139] mmc1: new high speed MMC card at address 0001 [ 2.311739] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.322107] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.332838] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.348732] mmcblk0: p1 p2 [ 2.371851] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.379188] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.391810] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.400138] hctosys: unable to open rtc device (rtc0) [ 2.405574] sr_init: No PMIC hook to init smartreflex [ 2.411225] sr_init: platform driver register failed for SR [ 2.456252] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done.

========================================================================

Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.571551] NET: Registered protocol family 10 [ 1.576827] sit: IPv6 over IPv4 tunneling driver [ 1.582092] NET: Registered protocol family 17 [ 1.586752] can: controller area network core (rev 20120528 abi 9) [ 1.593265] NET: Registered protocol family 29 [ 1.597918] can: raw protocol (rev 20120528) [ 1.602383] can: broadcast manager protocol (rev 20120528 t) [ 1.608306] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614335] Key type dns_resolver registered [ 1.618885] omap_voltage_late_init: Voltage driver support not added [ 1.626021] Power Management for TI OMAP4+ devices. [ 1.631321] ThumbEE CPU extension supported. [ 1.635814] Registering SWP/SWPB emulation handler [ 1.642631] palmas 0-0058: Irq flag is 0x00000008 [ 1.667245] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698917] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.713086] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735572] rtc-ds1307 2-006f: SET TIME! [ 1.741322] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.748064] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752668] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761496] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.796037] vdd_3v3: supplied by regen1 [ 1.836988] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.854076] aic_dvdd_fixed: disabling [ 1.858098] ldousb: disabling [ 1.862152] Waiting for root device /dev/mmcblk1p1... [ 1.869659] mmc1: MAN_BKOPS_EN bit is not set [ 1.881694] mmc1: new high speed MMC card at address 0001 [ 1.887674] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892558] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898907] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905768] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done.

========================================================================

Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.571530] NET: Registered protocol family 10 [ 1.576785] sit: IPv6 over IPv4 tunneling driver [ 1.582056] NET: Registered protocol family 17 [ 1.586718] can: controller area network core (rev 20120528 abi 9) [ 1.593216] NET: Registered protocol family 29 [ 1.597866] can: raw protocol (rev 20120528) [ 1.602339] can: broadcast manager protocol (rev 20120528 t) [ 1.608263] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614298] Key type dns_resolver registered [ 1.618847] omap_voltage_late_init: Voltage driver support not added [ 1.625983] Power Management for TI OMAP4+ devices. [ 1.631280] ThumbEE CPU extension supported. [ 1.635770] Registering SWP/SWPB emulation handler [ 1.642575] palmas 0-0058: Irq flag is 0x00000008 [ 1.667243] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698940] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.713096] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735566] rtc-ds1307 2-006f: SET TIME! [ 1.741326] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.748078] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752683] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761515] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.796031] vdd_3v3: supplied by regen1 [ 1.836955] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.854063] aic_dvdd_fixed: disabling [ 1.858078] ldousb: disabling [ 1.862141] Waiting for root device /dev/mmcblk1p1... [ 1.869630] mmc1: MAN_BKOPS_EN bit is not set [ 1.881654] mmc1: new high speed MMC card at address 0001 [ 1.887637] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892531] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898890] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905755] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done.

========================================================================

Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.455555] NET: Registered protocol family 10 [ 1.460808] sit: IPv6 over IPv4 tunneling driver [ 1.465975] NET: Registered protocol family 17 [ 1.470636] can: controller area network core (rev 20120528 abi 9) [ 1.477126] NET: Registered protocol family 29 [ 1.481776] can: raw protocol (rev 20120528) [ 1.486249] can: broadcast manager protocol (rev 20120528 t) [ 1.492175] can: netlink gateway (rev 20130117) max_hops=1 [ 1.498137] Key type dns_resolver registered [ 1.502685] omap_voltage_late_init: Voltage driver support not added [ 1.509622] Power Management for TI OMAP4+ devices. [ 1.514882] ThumbEE CPU extension supported. [ 1.519462] ata1: SATA link down (SStatus 0 SControl 300) [ 1.526376] palmas 0-0058: Irq flag is 0x00000008 [ 1.550772] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.578835] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.592135] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.614341] rtc-ds1307 2-006f: SET TIME! [ 1.619959] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.626666] rtc-ds1307 2-006f: 64 bytes nvram [ 1.631249] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.639051] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.674536] vdd_3v3: supplied by regen1 [ 1.709686] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.722127] aic_dvdd_fixed: disabling [ 1.726125] ldousb: disabling [ 1.729924] Waiting for root device /dev/mmcblk1p1... [ 1.768451] mmc1: MAN_BKOPS_EN bit is not set [ 1.780435] mmc1: new high speed MMC card at address 0001 [ 1.786311] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.791148] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.797439] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.804189] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:58]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:59]: Done.

========================================================================

Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.177650] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.188020] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.192878] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.199172] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.206034] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.215624] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.225117] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.232167] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.272727] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.279027] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.285900] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.295491] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.304982] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.312020] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.318133] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.324442] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.331328] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.340958] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.350467] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.357535] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.364340] vdd_3v3: supplied by regen1 [ 2.402985] hctosys: unable to open rtc device (rtc0) [ 2.408303] sr_init: No PMIC hook to init smartreflex [ 2.413849] sr_init: platform driver register failed for SR [ 2.456996] mmc1: MAN_BKOPS_EN bit is not set [ 2.465824] aic_dvdd_fixed: disabling [ 2.470098] ldousb: disabling [ 2.474484] mmc1: new high speed MMC card at address 0001 [ 2.480806] Waiting for root device /dev/mmcblk1p1... [ 2.482144] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.482817] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.483587] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.497332] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:45]: Done.

========================================================================

Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.178370] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.183954] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.191056] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.201059] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.210373] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.215858] vdd_1v8_gen: supplied by vdd_5v_in [ 3.222690] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.229315] [drm] No driver support for vblank timestamp query. [ 3.235263] drm drm: No connectors reported connected with modes [ 3.241278] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.266719] Console: switching to colour frame buffer device 128x48 [ 3.278740] drm drm: fb0: frame buffer device [ 3.293296] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.301738] usb3_vbus: supplied by vdd_5v_in [ 3.308100] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.314564] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.319974] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.327803] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.343307] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.350169] hub 1-0:1.0: USB hub found [ 3.353950] hub 1-0:1.0: 1 port detected [ 3.358798] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.364218] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.371988] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.388298] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.395086] hub 2-0:1.0: USB hub found [ 3.398861] hub 2-0:1.0: 1 port detected [ 3.407318] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.421211] vdd_sata,avdd_plle: disabling [ 3.425657] usb1_vbus: disabling [ 3.429705] Waiting for root device /dev/mmcblk1p1... [ 3.708305] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.646835] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:49]: got exception: timeout ~$off

[PYBOOT] [beaver 01:50]: Done.

========================================================================

Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.157927] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.163510] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.170113] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.180104] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.189279] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.194760] vdd_1v8_gen: supplied by vdd_5v_in [ 3.200349] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.206960] [drm] No driver support for vblank timestamp query. [ 3.212892] drm drm: No connectors reported connected with modes [ 3.218894] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.238158] Console: switching to colour frame buffer device 128x48 [ 3.249936] drm drm: fb0: frame buffer device [ 3.254372] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.262334] usb3_vbus: supplied by vdd_5v_in [ 3.268583] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.275029] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.280432] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.288148] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.303011] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.309364] hub 1-0:1.0: USB hub found [ 3.313128] hub 1-0:1.0: 1 port detected [ 3.317770] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.323177] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.330832] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.343008] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.349285] hub 2-0:1.0: USB hub found [ 3.353051] hub 2-0:1.0: 1 port detected [ 3.360534] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.373820] vdd_sata,avdd_plle: disabling [ 3.378207] usb1_vbus: disabling [ 3.382115] Waiting for root device /dev/mmcblk1p1... [ 3.663016] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.601522] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 02:03]: got exception: timeout ~$off

[PYBOOT] [beaver 02:05]: Done.

========================================================================

Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.613962] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08b6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.623964] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.632843] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.638366] vdd_1v8_gen: supplied by vdd_5v_in [ 3.647140] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.653778] [drm] No driver support for vblank timestamp query. [ 3.659776] drm drm: No connectors reported connected with modes [ 3.665791] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.692032] Console: switching to colour frame buffer device 128x48 [ 3.703806] drm drm: fb0: frame buffer device [ 3.730443] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.737938] usb3_vbus: supplied by vdd_5v_in [ 3.744041] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.750507] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.755925] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.763899] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.780452] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.788156] hub 1-0:1.0: USB hub found [ 3.791947] hub 1-0:1.0: 1 port detected [ 3.796733] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.802168] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.810036] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.830444] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.838026] hub 2-0:1.0: USB hub found [ 3.841878] hub 2-0:1.0: 1 port detected [ 3.850142] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.869146] vdd_sata,avdd_plle: disabling [ 3.873632] usb1_vbus: disabling [ 3.877061] ALSA device list: [ 3.880020] #0: NVIDIA Tegra Beaver [ 3.884298] Waiting for root device /dev/mmcblk1p1... [ 4.160450] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.145920] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:42]: got exception: timeout ~$off

[PYBOOT] [beaver 01:44]: Done.

========================================================================

Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 40.761441] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 81.624605] random: dd: uninitialized urandom read (512 bytes read, 51 bits of entropy available) [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 86.088577] eth0: device MAC address d6:e4:8e:58:25:42 [ 86.238746] RX IPC Checksum Offload disabled [ 86.243387] No MAC Management Counters available Listening on LPF/eth0/d6:e4:8e:58:25:42 Sending on LPF/eth0/d6:e4:8e:58:25:42 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 No DHCPOFFERS received. No working leases in persistent database - sleeping. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2.

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done.

========================================================================

Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.445014] can: netlink gateway (rev 20130117) max_hops=1 [ 2.452195] Key type dns_resolver registered [ 2.458768] ThumbEE CPU extension supported. [ 2.463288] Registering SWP/SWPB emulation handler [ 2.468375] mmc1: new high speed MMC card at address 0001 [ 2.478655] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 2.488412] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.497766] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.502889] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.504810] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.509615] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.524935] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.526264] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.526275] [drm] No driver support for vblank timestamp query. [ 2.547528] mmcblk0: p1 [ 2.693977] Console: switching to colour frame buffer device 240x75 [ 2.781100] drm drm: fb0: frame buffer device [ 2.803592] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.813317] usb2_vbus: supplied by vdd-sys-5v0 [ 2.826925] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.832559] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.841249] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.853640] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.864093] hub 1-0:1.0: USB hub found [ 2.868089] hub 1-0:1.0: 1 port detected [ 2.880083] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.892867] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.952502] dvdd_ts: disabling [ 2.955712] usb1_vbus: disabling [ 2.959028] vdd_cam_1v8_reg: disabling [ 2.966099] Waiting for root device /dev/mmcblk1p1... [ 3.178605] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.161590] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:11]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:12]: Done.

========================================================================

Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.410504] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.411303] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.413675] mmcblk0: p1 [ 2.442150] NET: Registered protocol family 29 [ 2.446726] can: raw protocol (rev 20120528) [ 2.451107] can: broadcast manager protocol (rev 20120528 t) [ 2.456898] can: netlink gateway (rev 20130117) max_hops=1 [ 2.464041] Key type dns_resolver registered [ 2.470427] ThumbEE CPU extension supported. [ 2.474849] Registering SWP/SWPB emulation handler [ 2.503402] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.509809] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.520787] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.536839] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.543641] [drm] No driver support for vblank timestamp query. [ 2.713651] Console: switching to colour frame buffer device 240x75 [ 2.800826] drm drm: fb0: frame buffer device [ 2.823864] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.833236] usb2_vbus: supplied by vdd-sys-5v0 [ 2.846930] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.852589] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.861255] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.873918] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.884325] hub 1-0:1.0: USB hub found [ 2.888320] hub 1-0:1.0: 1 port detected [ 2.899145] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.914149] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.980246] dvdd_ts: disabling [ 2.983371] usb1_vbus: disabling [ 2.986770] vdd_cam_1v8_reg: disabling [ 2.994386] Waiting for root device /dev/mmcblk1p1... [ 3.203925] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.186487] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:55]: Done.

========================================================================

Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.062739] can: netlink gateway (rev 20130117) max_hops=1 [ 2.069391] Key type dns_resolver registered [ 2.074476] ThumbEE CPU extension supported. [ 2.106391] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.111349] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.121441] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.144376] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.151060] [drm] No driver support for vblank timestamp query. [ 2.231952] mmc1: MAN_BKOPS_EN bit is not set [ 2.316236] Console: switching to colour frame buffer device 240x75 [ 2.408867] drm drm: fb0: frame buffer device [ 2.413476] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.421685] usb2_vbus: supplied by vdd-sys-5v0 [ 2.427624] mmc1: new high speed MMC card at address 0001 [ 2.439546] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.445090] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.453191] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 2.458209] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.464613] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.471161] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.477417] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.485010] mmcblk0: p1 [ 2.488017] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.500737] hub 1-0:1.0: USB hub found [ 2.505440] hub 1-0:1.0: 1 port detected [ 2.512775] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.524131] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.565382] dvdd_ts: disabling [ 2.568565] usb1_vbus: disabling [ 2.571844] vdd_cam_1v8_reg: disabling [ 2.577279] Waiting for root device /dev/mmcblk1p1... [ 2.815747] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.769068] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:00]: Done.

========================================================================

Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.815849] Bluetooth: RFCOMM socket layer initialized [ 2.821072] Bluetooth: RFCOMM ver 1.11 [ 2.825088] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.830481] Bluetooth: BNEP socket layer initialized [ 2.836126] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.842130] Bluetooth: HIDP socket layer initialized [ 2.848617] Key type dns_resolver registered [ 2.858217] Registering SWP/SWPB emulation handler [ 2.889529] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.896838] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.906907] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.931873] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.938672] [drm] No driver support for vblank timestamp query. [ 3.115047] Console: switching to colour frame buffer device 240x75 [ 3.201805] drm drm: fb0: frame buffer device [ 3.244578] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.251758] usb2_vbus: supplied by vdd-sys-5v0 [ 3.263624] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.269403] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.278489] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.304607] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.318668] hub 1-0:1.0: USB hub found [ 3.322623] hub 1-0:1.0: 1 port detected [ 3.336400] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.350549] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.443288] dvdd_ts: disabling [ 3.446509] usb1_vbus: disabling [ 3.449822] vdd_cam_1v8_reg: disabling [ 3.454559] ALSA device list: [ 3.457553] #0: NVIDIA Tegra Dalmore [ 3.463330] Waiting for root device /dev/mmcblk1p1... [ 3.644610] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.679643] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:47]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:48]: Done.

========================================================================

Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 2.331818] usbhid: USB HID core driver [ 2.340199] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.351256] fsl-asoc-card sound-sgtl5000: ASoC: CPU DAI (null) not registered [ 2.358532] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517) [ 2.370445] mmc0: new high speed SDHC card at address b368 [ 2.379496] fsl-asrc 2034000.asrc: driver registered [ 2.388365] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.521328] mmcblk0: p1 p2 [ 3.026945] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.034414] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.044148] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 3.058161] NET: Registered protocol family 10 [ 3.065595] sit: IPv6 over IPv4 tunneling driver [ 3.072292] NET: Registered protocol family 17 [ 3.076795] can: controller area network core (rev 20120528 abi 9) [ 3.083187] NET: Registered protocol family 29 [ 3.087709] can: raw protocol (rev 20120528) [ 3.092089] can: broadcast manager protocol (rev 20120528 t) [ 3.097824] can: netlink gateway (rev 20130117) max_hops=1 [ 3.104034] Key type dns_resolver registered [ 3.113503] Registering SWP/SWPB emulation handler [ 3.124488] imx_thermal 2000000.aips-bus:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.137254] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 3.144460] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 3.154833] fsl-asoc-card sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.162386] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.169840] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.177252] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.185706] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.235075] brcm_reg: disabling [ 3.238785] ALSA device list: [ 3.241767] #0: On-board SPDIF [ 3.246448] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [hummingboard 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 01:47]: got exception: timeout ~$off

[PYBOOT] [hummingboard 01:48]: Done.

========================================================================

Board hummingboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.256192] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.265914] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified [ 1.273088] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.282263] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 1.288541] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 1.330039] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.339480] ledtrig-cpu: registered to indicate activity on CPUs [ 1.345759] usbcore: registered new interface driver usbhid [ 1.351361] usbhid: USB HID core driver [ 1.360091] NET: Registered protocol family 10 [ 1.367476] sit: IPv6 over IPv4 tunneling driver [ 1.372767] NET: Registered protocol family 17 [ 1.377265] can: controller area network core (rev 20120528 abi 9) [ 1.383533] NET: Registered protocol family 29 [ 1.388012] can: raw protocol (rev 20120528) [ 1.392311] can: broadcast manager protocol (rev 20120528 t) [ 1.398000] can: netlink gateway (rev 20130117) max_hops=1 [ 1.403978] Key type dns_resolver registered [ 1.408426] ThumbEE CPU extension supported. [ 1.412738] Registering SWP/SWPB emulation handler [ 1.428540] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.436954] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.444151] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.456210] hctosys: unable to open rtc device (rtc0) [ 1.470800] brcm_reg: disabling [ 1.474997] Waiting for root device /dev/mmcblk1p2... [ 1.512541] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.526632] mmc0: new high speed SDHC card at address b368 [ 1.532608] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.538531] mmcblk0: p1 p2 [ 1.542297] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.550759] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.557947] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode

[PYBOOT] [hummingboard 02:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 02:42]: got exception: timeout ~$off

[PYBOOT] [hummingboard 02:43]: Done.

========================================================================

Board hummingboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.255327] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.262493] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.272176] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified [ 1.279340] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.288505] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 1.293971] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 1.333795] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.343021] ledtrig-cpu: registered to indicate activity on CPUs [ 1.349277] usbcore: registered new interface driver usbhid [ 1.354869] usbhid: USB HID core driver [ 1.362867] NET: Registered protocol family 10 [ 1.370274] sit: IPv6 over IPv4 tunneling driver [ 1.375443] NET: Registered protocol family 17 [ 1.379931] can: controller area network core (rev 20120528 abi 9) [ 1.386178] NET: Registered protocol family 29 [ 1.390651] can: raw protocol (rev 20120528) [ 1.394942] can: broadcast manager protocol (rev 20120528 t) [ 1.400627] can: netlink gateway (rev 20130117) max_hops=1 [ 1.406549] Key type dns_resolver registered [ 1.410983] ThumbEE CPU extension supported. [ 1.423877] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.432051] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.439232] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.451135] hctosys: unable to open rtc device (rtc0) [ 1.461835] brcm_reg: disabling [ 1.465794] Waiting for root device /dev/mmcblk1p2... [ 1.506214] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.520230] mmc0: new high speed SDHC card at address b368 [ 1.526106] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.531912] mmcblk0: p1 p2 [ 1.535532] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.543799] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.550962] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode

[PYBOOT] [hummingboard 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 01:43]: got exception: timeout ~$off

[PYBOOT] [hummingboard 01:44]: Done.

========================================================================

Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.897244] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.905940] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.937253] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.938288] usbcore: registered new interface driver usbhid [ 1.942690] usbhid: USB HID core driver [ 1.953683] NET: Registered protocol family 10 [ 1.954736] sit: IPv6 over IPv4 tunneling driver [ 1.958007] NET: Registered protocol family 17 [ 1.961537] NET: Registered protocol family 15 [ 1.966199] Registering SWP/SWPB emulation handler [ 1.972564] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.976335] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.983931] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.984897] mmc1: MAN_BKOPS_EN bit is not set [ 1.986165] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.986382] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.986660] mmc1: new DDR MMC card at address 0001 [ 1.987346] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.987587] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.987819] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.988047] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.989313] mmcblk0: p1 p2 [ 2.067875] max98090 1-0010: MAX98090 REVID=0x43 [ 2.070365] max98090 1-0010: use default 2.8v micbias [ 2.079583] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.084042] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.112792] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.136497] VDD10_HDMI_1.0V: disabling [ 2.137289] vdd_g3d: disabling [ 2.138358] BUCK8_2.8V: disabling [ 2.142412] ALSA device list: [ 2.143889] #0: Odroid-U3 [ 2.147706] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:49]: Done.

========================================================================

Board odroidu3-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.390603] dwmmc_exynos 12550000.mmc: No vqmmc regulator found [ 1.396506] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.429714] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.430227] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.436470] ledtrig-cpu: registered to indicate activity on CPUs [ 1.441312] usbcore: registered new interface driver usbhid [ 1.446740] usbhid: USB HID core driver [ 1.453260] NET: Registered protocol family 10 [ 1.455421] sit: IPv6 over IPv4 tunneling driver [ 1.459917] NET: Registered protocol family 17 [ 1.463994] can: controller area network core (rev 20120528 abi 9) [ 1.470189] NET: Registered protocol family 29 [ 1.474564] can: raw protocol (rev 20120528) [ 1.478827] can: broadcast manager protocol (rev 20120528 t) [ 1.484468] can: netlink gateway (rev 20130117) max_hops=1 [ 1.490164] Key type dns_resolver registered [ 1.494292] ThumbEE CPU extension supported. [ 1.498438] Registering SWP/SWPB emulation handler [ 1.505928] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.535222] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.547303] mmc1: MAN_BKOPS_EN bit is not set [ 1.547798] VDD10_HDMI_1.0V: disabling [ 1.548601] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.548793] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.549078] mmc1: new DDR MMC card at address 0001 [ 1.549499] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.549662] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.549851] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.550005] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.560301] mmcblk0: p1 p2 [ 1.599385] vdd_g3d: disabling [ 1.602407] BUCK8_2.8V: disabling [ 1.607473] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:48]: Done.

========================================================================

Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.680003] mmc2: switch to bus width 2 failed [ 1.684475] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.690788] mmc2: switch to bus width 1 failed [ 1.690801] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.701720] mmc2: new high speed MMC card at address 0001 [ 1.710972] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.711525] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.711550] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.711581] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.711843] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.729890] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.730609] hub 3-0:1.0: USB hub found [ 1.730645] hub 3-0:1.0: 1 port detected [ 1.757514] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.758601] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.758603] [drm] No driver support for vblank timestamp query. [ 1.776163] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.783177] mmcblk0: p3 [ 1.874022] Console: switching to colour frame buffer device 170x48 [ 1.881392] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.889535] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.892469] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.899972] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.914859] drm drm: fb0: frame buffer device [ 1.919510] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.928722] mmc0: new SDIO card at address 0001 [ 1.933772] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.940305] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.947260] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.960673] vdd_1v5: disabling [ 1.963723] vdd_1v2: disabling [ 2.608307] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.619492] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 03:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 03:01]: got exception: timeout ~$off

[PYBOOT] [seaboard 03:02]: Done.

========================================================================

Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.651257] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.657637] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.668035] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674499] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679913] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687654] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699636] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.706201] hub 3-0:1.0: USB hub found [ 1.709996] hub 3-0:1.0: 1 port detected [ 1.717342] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.723952] [drm] No driver support for vblank timestamp query. [ 1.730776] mmc2: switch to bus width 2 failed [ 1.756932] mmc2: switch to bus width 1 failed [ 1.761387] mmc2: new high speed MMC card at address 0001 [ 1.774951] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.775060] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.775197] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.776279] mmcblk0: p3 [ 1.805686] Console: switching to colour frame buffer device 170x48 [ 1.846562] drm drm: fb0: frame buffer device [ 1.851021] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.857454] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.864394] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.876390] vdd_1v5: disabling [ 1.879449] vdd_1v2: disabling [ 1.932205] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.945706] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.954134] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.966926] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.991542] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.000394] mmc0: new SDIO card at address 0001 [ 2.495510] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.506614] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:53]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:55]: Done.

========================================================================

Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.813755] Bluetooth: BNEP socket layer initialized [ 1.818787] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.824817] Bluetooth: HIDP socket layer initialized [ 1.830766] Key type dns_resolver registered [ 1.836909] Registering SWP/SWPB emulation handler [ 1.857215] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.863580] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.869826] VDDIO_HDMI: supplied by vdd_5v0 [ 1.874610] vdd_sys: supplied by vdd_5v0 [ 1.878760] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.884195] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.891262] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.903721] mmc0: new SDIO card at address 0001 [ 1.904925] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.904968] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.905064] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.905730] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.920872] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.943434] hub 3-0:1.0: USB hub found [ 1.947272] hub 3-0:1.0: 1 port detected [ 1.958168] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.964787] [drm] No driver support for vblank timestamp query. [ 2.055009] Console: switching to colour frame buffer device 170x48 [ 2.073865] drm drm: fb0: frame buffer device [ 2.100830] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.107914] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.115481] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.134538] vdd_1v5: disabling [ 2.137589] vdd_1v2: disabling [ 2.140751] ALSA device list: [ 2.143737] #0: NVIDIA Tegra Seaboard [ 2.390311] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.401554] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:55]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:56]: Done.

========================================================================

Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.958282] can: controller area network core (rev 20120528 abi 9) [ 1.964538] NET: Registered protocol family 29 [ 1.968994] can: raw protocol (rev 20120528) [ 1.973266] can: broadcast manager protocol (rev 20120528 t) [ 1.978942] can: netlink gateway (rev 20130117) max_hops=1 [ 1.984954] Key type dns_resolver registered [ 1.989379] ThumbEE CPU extension supported. [ 1.993682] Registering SWP/SWPB emulation handler [ 2.001037] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.007812] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.016967] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.023986] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.030975] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.037963] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.051513] db8500-esram12: disabling [ 2.055297] db8500-esram34: disabling [ 2.059234] V-CSI/DSI: disabling [ 2.062530] mmci-reg: disabling [ 2.066223] uart-pl011 80007000.uart: DMA channel TX dma0chan8 [ 2.072113] uart-pl011 80007000.uart: DMA channel RX dma0chan9 [ 2.078277] Waiting for root device /dev/mmcblk3p4... [ 3.912872] mmc3: new high speed MMC card at address 0001 [ 3.919067] mmcblk0: mmc3:0001 3.53 GiB [ 3.923522] mmcblk0boot0: mmc3:0001 partition 1 2.00 MiB [ 3.929321] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 3.935089] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 3.941894] mmcblk0: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:22]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:23]: got exception: timeout ~$off

[PYBOOT] [snowball 02:25]: Done.

========================================================================

Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.901763] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.909698] ledtrig-cpu: registered to indicate activity on CPUs [ 1.915954] usbcore: registered new interface driver usbhid [ 1.921539] usbhid: USB HID core driver [ 1.929443] NET: Registered protocol family 10 [ 1.987091] sit: IPv6 over IPv4 tunneling driver [ 1.992248] NET: Registered protocol family 17 [ 1.996734] can: controller area network core (rev 20120528 abi 9) [ 2.002960] NET: Registered protocol family 29 [ 2.007415] can: raw protocol (rev 20120528) [ 2.011688] can: broadcast manager protocol (rev 20120528 t) [ 2.017364] can: netlink gateway (rev 20130117) max_hops=1 [ 2.023254] Key type dns_resolver registered [ 2.027709] ThumbEE CPU extension supported. [ 2.084197] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.096923] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.106018] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.113037] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.120025] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.127014] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.138946] db8500-esram12: disabling [ 2.191741] db8500-esram34: disabling [ 2.211517] V-CSI/DSI: disabling [ 2.221740] mmci-reg: disabling [ 2.225372] uart-pl011 80007000.uart: DMA channel TX dma0chan8 [ 2.231262] uart-pl011 80007000.uart: DMA channel RX dma0chan9 [ 2.247344] Waiting for root device /dev/mmcblk3p4... [ 4.117767] mmc3: new high speed MMC card at address 0001 [ 4.123901] mmcblk0: mmc3:0001 3.53 GiB [ 4.128265] mmcblk0boot0: mmc3:0001 partition 1 2.00 MiB [ 4.133911] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 4.139556] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 4.146179] mmcblk0: p1 p2 p3 p4

[PYBOOT] [snowball 02:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:18]: got exception: timeout ~$off

[PYBOOT] [snowball 02:19]: Done.

========================================================================

Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.590179] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.596435] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.609130] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.619842] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.629791] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.640502] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.664245] NET: Registered protocol family 10 [ 2.679656] sit: IPv6 over IPv4 tunneling driver [ 2.685577] NET: Registered protocol family 17 [ 2.690124] NET: Registered protocol family 35 [ 2.694824] NET: Registered protocol family 37 [ 2.699493] Registering SWP/SWPB emulation handler [ 2.716033] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.723541] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-01-05 20:04:00 UTC (947102640) [ 2.733184] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.740203] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.747253] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.754241] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.768035] db8500-esram12: disabling [ 2.771850] db8500-esram34: disabling [ 2.775756] V-CSI/DSI: disabling [ 2.779022] mmci-reg: disabling [ 2.782348] ALSA device list: [ 2.785308] #0: MOP500-card [ 2.788604] uart-pl011 80007000.uart: DMA channel TX dma0chan12 [ 2.794586] uart-pl011 80007000.uart: DMA channel RX dma0chan13 [ 2.800750] Waiting for root device /dev/mmcblk3p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:12]: got exception: timeout ~$off

[PYBOOT] [snowball 02:13]: Done.