Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7-176-g65643e3/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:55.07 bbb arm-multi_v7_defconfig : FAILED 1:56.55 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.39 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:47.20 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:47.00 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.25 cosmic arm-multi_v7_defconfig : FAILED 2:12.07 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:50.20 dalmore arm-multi_v7_defconfig : FAILED 2:01.73 dalmore arm-multi_lpae_defconfig : FAILED 1:59.78 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:52.41 omap5uevm arm-multi_v7_defconfig : FAILED 0:47.84 omap5uevm arm-multi_lpae_defconfig : FAILED 0:52.49 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:57.85 pi arm-multi_lpae_defconfig : FAILED 1:46.73 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:50.05 seaboard arm-multi_v7_defconfig : FAILED 1:54.58 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:55.44 snowball arm-multi_v7_defconfig : FAILED 2:07.73 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:22.33 arndale arm-exynos_defconfig : passed 1:31.18 arndale arm-multi_v7_defconfig : passed 1:16.71 arndale arm-multi_lpae_defconfig : passed 1:29.84 capri arm-bcm_defconfig : passed 0:51.42 capri arm-multi_v7_defconfig : passed 0:53.93 chitra powerpc-ppc64_defconfig : passed 2:07.52 colombus arm-sunxi_defconfig : passed 2:23.05 colombus arm-multi_v7_defconfig : passed 2:34.67 colombus arm-multi_lpae_defconfig : passed 2:39.65 cubie arm-sunxi_defconfig : passed 0:54.80 cubie arm-multi_v7_defconfig : passed 0:51.81 cubie2 arm-sunxi_defconfig : passed 0:48.45 cubie2 arm-multi_v7_defconfig : passed 1:00.39 cubie2 arm-multi_lpae_defconfig : passed 0:50.91 cubox arm-multi_v7_defconfig : passed 1:23.12 cubox arm-mvebu_v7_defconfig : passed 1:07.69 hummingboard arm-imx_v6_v7_defconfig : passed 1:31.20 hummingboard arm-multi_v7_defconfig : passed 1:19.38 jetsontk1 arm-tegra_defconfig : passed 1:33.84 jetsontk1 arm-multi_v7_defconfig : passed 1:34.02 jetsontk1 arm-multi_lpae_defconfig : passed 1:38.00 omap5uevm arm-omap2plus_defconfig : passed 1:08.59 pandaes arm-omap2plus_defconfig : warnings 1:38.30 pandaes arm-multi_v7_defconfig : passed 1:58.57 pi arm-exynos_defconfig : passed 2:13.42 pit arm-exynos_defconfig : passed 2:12.34 pit arm-multi_v7_defconfig : passed 2:16.59 pit arm-multi_lpae_defconfig : passed 2:16.12 seattle arm64-defconfig : warnings 2:17.54 snow arm-exynos_defconfig : passed 2:08.35 snow arm-multi_v7_defconfig : passed 1:56.51 snow arm-multi_lpae_defconfig : passed 1:58.39 trimslice arm-tegra_defconfig : passed 1:32.49 trimslice arm-multi_v7_defconfig : passed 1:42.19 wandboard arm-imx_v6_v7_defconfig : passed 1:16.50 wandboard arm-multi_v7_defconfig : passed 1:14.74

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:14.82 beaver arm-multi_v7_defconfig : OFFLINE 2:17.37 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:12.16 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:23.51 parallella arm-multi_v7_defconfig : OFFLINE 2:25.39 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.31 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.18 sama5 arm-sama5_defconfig : OFFLINE 2:22.71 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:13.96 socfpga arm-socfpga_defconfig : OFFLINE 2:25.01 socfpga arm-multi_v7_defconfig : OFFLINE 2:20.25

Board legend is available at http://arm-soc.lixom.net/boards.html

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.625922] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.636226] ledtrig-cpu: registered to indicate activity on CPUs [ 1.643324] usbcore: registered new interface driver usbhid [ 1.649252] usbhid: USB HID core driver [ 1.661321] NET: Registered protocol family 10 [ 1.667894] sit: IPv6 over IPv4 tunneling driver [ 1.674046] NET: Registered protocol family 17 [ 1.678821] can: controller area network core (rev 20120528 abi 9) [ 1.685458] NET: Registered protocol family 29 [ 1.690179] can: raw protocol (rev 20120528) [ 1.694700] can: broadcast manager protocol (rev 20120528 t) [ 1.700695] can: netlink gateway (rev 20130117) max_hops=1 [ 1.707457] Key type dns_resolver registered [ 1.712350] omap_voltage_late_init: Voltage driver support not added [ 1.720629] ThumbEE CPU extension supported. [ 1.725263] Registering SWP/SWPB emulation handler [ 1.767392] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.773922] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.781695] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.790354] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.798251] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.806080] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.813885] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821239] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.829908] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.837825] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.847550] mmc1: new high speed MMC card at address 0001 [ 1.854812] hctosys: unable to open rtc device (rtc0) [ 1.867800] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.873815] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.880886] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.889733] mmcblk1: p1 p2 [ 1.895444] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:54]: got exception: timeout ~$off

[PYBOOT] [bbb 01:56]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.057834] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.063971] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.070315] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.077210] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.086833] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.096359] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.103398] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.146550] ledtrig-cpu: registered to indicate activity on CPUs [ 2.155260] oprofile: using arm/armv7 [ 2.160353] Initializing XFRM netlink socket [ 2.165428] NET: Registered protocol family 10 [ 2.176148] sit: IPv6 over IPv4 tunneling driver [ 2.184932] NET: Registered protocol family 17 [ 2.189858] NET: Registered protocol family 15 [ 2.195106] Key type dns_resolver registered [ 2.200038] omap_voltage_late_init: Voltage driver support not added [ 2.206779] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.215271] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.225549] ThumbEE CPU extension supported. [ 2.230199] Registering SWP/SWPB emulation handler [ 2.235249] SmartReflex Class3 initialized [ 2.307634] mmc1: new high speed MMC card at address 0001 [ 2.319656] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.329799] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.341397] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.348686] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.356424] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.370713] mmcblk1: p1 p2 [ 2.378792] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.387116] hctosys: unable to open rtc device (rtc0) [ 2.392429] sr_init: No PMIC hook to init smartreflex [ 2.398189] sr_init: platform driver register failed for SR [ 2.451843] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:53]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.717364] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724449] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750471] rtc-ds1307 2-006f: SET TIME! [ 1.756230] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762998] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767610] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775775] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781570] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789814] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.798985] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805865] hub 1-0:1.0: USB hub found [ 1.809817] hub 1-0:1.0: 1 port detected [ 1.814206] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.819987] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828097] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837113] hub 2-0:1.0: USB hub found [ 1.841076] hub 2-0:1.0: 1 port detected [ 1.847091] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881112] vdd_3v3: supplied by regen1 [ 1.920212] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937103] aic_dvdd_fixed: disabling [ 1.941695] Waiting for root device /dev/mmcblk0p1... [ 1.972057] mmc1: new high speed MMC card at address 0001 [ 1.978025] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.982924] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.989265] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.996143] mmcblk1: p1 [ 2.119970] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.154994] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180207] hub 2-1:1.0: USB hub found [ 2.184187] hub 2-1:1.0: 4 ports detected [ 2.276228] hub 1-1:1.0: USB hub found [ 2.280212] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.717618] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724704] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750791] rtc-ds1307 2-006f: SET TIME! [ 1.756536] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763293] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767910] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776110] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781897] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790150] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799329] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806201] hub 1-0:1.0: USB hub found [ 1.810163] hub 1-0:1.0: 1 port detected [ 1.814564] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820343] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828458] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837477] hub 2-0:1.0: USB hub found [ 1.841445] hub 2-0:1.0: 1 port detected [ 1.847475] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881388] vdd_3v3: supplied by regen1 [ 1.920783] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.938309] aic_dvdd_fixed: disabling [ 1.943065] Waiting for root device /dev/mmcblk0p1... [ 1.987321] mmc1: new high speed MMC card at address 0001 [ 1.993308] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.998200] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.004539] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.011399] mmcblk1: p1 [ 2.120281] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155342] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180571] hub 2-1:1.0: USB hub found [ 2.184549] hub 2-1:1.0: 4 ports detected [ 2.276596] hub 1-1:1.0: USB hub found [ 2.280584] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.174372] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181252] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191647] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196511] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202814] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209677] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219278] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228773] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235839] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283845] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290150] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.297022] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306619] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316122] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323165] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329283] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335595] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342452] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.352054] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361561] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368605] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375310] vdd_3v3: supplied by regen1 [ 2.413924] hctosys: unable to open rtc device (rtc0) [ 2.419223] sr_init: No PMIC hook to init smartreflex [ 2.424737] sr_init: platform driver register failed for SR [ 2.471904] aic_dvdd_fixed: disabling [ 2.476163] ldousb: disabling [ 2.485385] Waiting for root device /dev/mmcblk0p1... [ 2.535517] mmc1: new high speed MMC card at address 0001 [ 2.543282] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548580] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555351] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563856] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.469368] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.543593] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.553914] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.628093] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.638411] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.712640] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.722960] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.797141] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.807459] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.881904] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.892228] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.966414] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.976747] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.050969] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.061295] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.135533] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.145853] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.220082] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.230396] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.304626] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.314940] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.389114] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.399433] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.473659] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.483979] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.558150] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.568473] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.642695] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.653017] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.727199] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.737518] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.811819] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.822135] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.078585] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.152567] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.162645] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.236625] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.246695] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.320676] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.330747] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.404724] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.414799] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.488780] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.498860] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.572845] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.582913] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.656901] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.666966] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.740944] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.751017] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.824993] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.835058] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.909038] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.919111] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.993096] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.003169] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.077154] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.087229] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.161210] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.171281] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.245260] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.255332] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.329315] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.339392] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.413369] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.423443] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:10]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:11]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.486158] Key type dns_resolver registered [ 2.492566] ThumbEE CPU extension supported. [ 2.496982] Registering SWP/SWPB emulation handler [ 2.522206] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.530072] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.541589] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.556598] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.563352] [drm] No driver support for vblank timestamp query. [ 2.583283] mmc1: new high speed MMC card at address 0001 [ 2.593375] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.601520] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.612188] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.620805] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.632395] mmcblk1: p1 [ 2.742732] Console: switching to colour frame buffer device 240x75 [ 2.830197] drm drm: fb0: frame buffer device [ 2.848867] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.858962] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870577] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876173] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885022] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.898909] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909179] hub 1-0:1.0: USB hub found [ 2.913182] hub 1-0:1.0: 1 port detected [ 2.923294] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.937096] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.998979] dvdd_ts: disabling [ 3.002080] usb1_vbus: disabling [ 3.005437] vdd_cam_1v8_reg: disabling [ 3.012769] Waiting for root device /dev/mmcblk0p1... [ 3.223945] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.197427] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.108864] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.481491] Key type dns_resolver registered [ 2.487930] ThumbEE CPU extension supported. [ 2.492349] Registering SWP/SWPB emulation handler [ 2.519936] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.527179] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.536984] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.550723] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.557494] [drm] No driver support for vblank timestamp query. [ 2.579940] mmc1: new high speed MMC card at address 0001 [ 2.590105] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.598108] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.607094] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.616529] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.626564] mmcblk1: p1 [ 2.736647] Console: switching to colour frame buffer device 240x75 [ 2.823899] drm drm: fb0: frame buffer device [ 2.839003] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.849094] usb2_vbus: supplied by vdd-sys-5v0 [ 2.860764] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.866354] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.875210] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.889025] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.899406] hub 1-0:1.0: USB hub found [ 2.903394] hub 1-0:1.0: 1 port detected [ 2.913554] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.927548] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.988829] dvdd_ts: disabling [ 2.991941] usb1_vbus: disabling [ 2.995318] vdd_cam_1v8_reg: disabling [ 3.002739] Waiting for root device /dev/mmcblk0p1... [ 3.214062] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.196371] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 50.233985] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.839119] Bluetooth: RFCOMM ver 1.11 [ 2.843296] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.848695] Bluetooth: BNEP socket layer initialized [ 2.853787] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.859786] Bluetooth: HIDP socket layer initialized [ 2.866704] Key type dns_resolver registered [ 2.876400] Registering SWP/SWPB emulation handler [ 2.904902] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.910145] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.917312] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.940041] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.946830] [drm] No driver support for vblank timestamp query. [ 3.123718] Console: switching to colour frame buffer device 240x75 [ 3.210730] drm drm: fb0: frame buffer device [ 3.241346] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.248633] usb2_vbus: supplied by vdd-sys-5v0 [ 3.257061] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.262923] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.272022] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.291350] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.305440] hub 1-0:1.0: USB hub found [ 3.309464] hub 1-0:1.0: 1 port detected [ 3.323446] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.339692] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.434891] dvdd_ts: disabling [ 3.437997] usb1_vbus: disabling [ 3.441387] vdd_cam_1v8_reg: disabling [ 3.446049] ALSA device list: [ 3.449041] #0: NVIDIA Tegra Dalmore [ 3.454993] Waiting for root device /dev/mmcblk0p1... [ 3.631344] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.654948] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.741284] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:48]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:49]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.778751] usbcore: registered new interface driver usbhid [ 1.783965] usbhid: USB HID core driver [ 1.792795] NET: Registered protocol family 10 [ 1.799741] sit: IPv6 over IPv4 tunneling driver [ 1.800225] NET: Registered protocol family 17 [ 1.803176] NET: Registered protocol family 15 [ 1.807672] Key type dns_resolver registered [ 1.811941] Registering SWP/SWPB emulation handler [ 1.822804] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.823084] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.841876] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.846114] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.856023] mmc1: new DDR MMC card at address 0001 [ 1.860617] max98090 1-0010: MAX98090 REVID=0x43 [ 1.867353] max98090 1-0010: use default 2.8v micbias [ 1.870406] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.875507] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.880803] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.886790] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.892158] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.892165] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.896377] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.899005] hub 1-3:1.0: USB hub found [ 1.905963] hub 1-3:1.0: 3 ports detected [ 1.916591] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.927781] mmcblk1: p1 p2 [ 1.957288] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.974851] VDD10_HDMI_1.0V: disabling [ 1.975535] vdd_g3d: disabling [ 1.976614] BUCK8_2.8V: disabling [ 1.980587] ALSA device list: [ 1.982239] #0: Odroid-U3 [ 1.985863] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:51]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.277754] 3f00: eefcce40 00000000 eefd0600 c0356718 c1302100 eefcce58 eefcce40 ee156e98 [ 2.286312] 3f20: 00000008 c1302100 eefcce58 ee172000 eefcce40 c0357384 ee15f1c0 ee156e80 [ 2.294873] 3f40: c035734c 00000000 ee15f1c0 ee156e80 c035734c 00000000 00000000 00000000 [ 2.303431] 3f60: 00000000 c035c140 00000000 00000000 a204a855 ee156e80 00000000 00000000 [ 2.311991] 3f80: ee173f80 ee173f80 00000000 00000000 ee173f90 ee173f90 ee15f1c0 ee15f1c0 [ 2.320550] 3fa0: c035c064 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.329111] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.337670] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 40100500 53506490 [ 2.346231] [<c038428c>] (__irq_wake_thread) from [<c0384338>] (handle_irq_event_percpu+0x74/0x14c) [ 2.355700] [<c0384338>] (handle_irq_event_percpu) from [<c0384454>] (handle_irq_event+0x44/0x68) [ 2.364989] [<c0384454>] (handle_irq_event) from [<c0387690>] (handle_fasteoi_irq+0xb4/0x194) [ 2.373913] [<c0387690>] (handle_fasteoi_irq) from [<c0383a2c>] (generic_handle_irq+0x24/0x34) [ 2.382931] [<c0383a2c>] (generic_handle_irq) from [<c0383cdc>] (__handle_domain_irq+0x5c/0xb4) [ 2.392040] [<c0383cdc>] (__handle_domain_irq) from [<c0301798>] (gic_handle_irq+0x54/0x94) [ 2.400784] [<c0301798>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 2.408614] Exception stack(0xee173e48 to 0xee173e90) [ 2.413899] 3e40: c14106dc 00000000 ff550000 c09dd504 c1444b70 000017ff [ 2.422462] 3e60: 0d185f62 c0d6b0f4 c0d6b100 00000000 eefcce40 ee156e80 00000000 ee173e98 [ 2.431017] 3e80: c030f784 c09dd508 a0000013 ffffffff [ 2.436305] [<c030c494>] (__irq_svc) from [<c09dd508>] (arch_counter_get_cntvct+0x4/0xc) [ 2.444780] [<c09dd508>] (arch_counter_get_cntvct) from [<c030f784>] (arch_timer_read_counter_long+0x14/0x18) [ 2.455160] [<c030f784>] (arch_timer_read_counter_long) from [<c05898bc>] (__timer_delay+0x4c/0x5c) [ 2.464635] [<c05898bc>] (__timer_delay) from [<c09a4690>] (mmc_go_idle+0xd4/0xd8) [ 2.472560] [<c09a4690>] (mmc_go_idle) from [<c09a0548>] (mmc_rescan+0x25c/0x348) [ 2.480393] [<c09a0548>] (mmc_rescan) from [<c0356718>] (process_one_work+0x1ec/0x410) [ 2.488680] [<c0356718>] (process_one_work) from [<c0357384>] (worker_thread+0x38/0x594) [ 2.497151] [<c0357384>] (worker_thread) from [<c035c140>] (kthread+0xdc/0xf4) [ 2.504714] [<c035c140>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.512271] Code: e2811024 eb081b34 e3500000 18bd8070 (e5952070) [ 2.518647] ---[ end trace 7715a66571cc6276 ]--- [ 2.523474] Kernel panic - not syncing: Fatal exception in interrupt [ 2.530124] CPU1: stopping [ 2.532950] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.6.0-rc7-00176-g65643e3 #1 [ 2.542044] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.548328] [<c031031c>] (unwind_backtrace) from [<c030b968>] (show_stack+0x10/0x14) [ 2.556 [PYBOOT] [omap5uevm 00:50]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:51]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.941341] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.974311] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.000124] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.010076] smsc95xx v1.0.4 [ 2.041136] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.049041] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.058806] Unable to handle kernel paging request at virtual address c1300000 [ 2.066377] pgd = c0204000 [ 2.069206] [c1300000] *pgd=8121140e(bad) [ 2.073412] Internal error: Oops: 8000000d [#1] SMP ARM [ 2.078883] Modules linked in: [ 2.082085] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc7-00176-g65643e3 #1 [ 2.089912] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.096200] task: c1306a80 ti: c1300000 task.ti: c1300000 [ 2.101855] PC is at 0xc1300000 [ 2.105144] LR is at cpu_startup_entry+0x130/0x218 [ 2.110157] pc : [<c1300000>] lr : [<c037811c>] psr: 60000093 [ 2.110157] sp : c1301fa8 ip : 60000013 fp : c130250c [ 2.122173] r10: c140dee8 r9 : c1302504 r8 : c12075c0 [ 2.127641] r7 : 00000000 r6 : 00000000 r5 : c13024a4 r4 : c1300000 [ 2.134482] r3 : c1301fa8 r2 : c12075c0 r1 : 2ddc5000 r0 : 00000000 [ 2.141320] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.148885] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.154899] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.161191] Stack: (0xc1301fa8 to 0xc1302000) [ 2.165755] 1fa0: c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c4c [ 2.174321] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a3a30 c14105d4 c1302480 [ 2.182887] 1fe0: c11a3a2c c1307c4c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.191462] [<c037811c>] (cpu_startup_entry) from [<c1100c4c>] (start_kernel+0x370/0x37c) [ 2.200029] [<c1100c4c>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.206863] Code: 00000000 00000000 00000000 00000000 (00000000) [ 2.213240] ---[ end trace 6970e977af2345a4 ]--- [ 2.218068] Kernel panic - not syncing: Attempted to kill the idle task! [ 3.202048] SMP: failed to stop secondary CPUs [ 3.206697] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [omap5uevm 00:46]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:47]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.522836] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529183] isl29018 7-0044: Failed to read 1: -6 [ 1.533768] isl29018 7-0044: regmap initialization fails: -6 [ 1.543991] NET: Registered protocol family 10 [ 1.548440] sit: IPv6 over IPv4 tunneling driver [ 1.552026] NET: Registered protocol family 17 [ 1.556028] can: controller area network core (rev 20120528 abi 9) [ 1.562216] NET: Registered protocol family 29 [ 1.566607] can: raw protocol (rev 20120528) [ 1.570856] can: broadcast manager protocol (rev 20120528 t) [ 1.576499] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582222] Key type dns_resolver registered [ 1.586543] ThumbEE CPU extension supported. [ 1.590445] Registering SWP/SWPB emulation handler [ 1.599640] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605121] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611487] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.616863] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.626934] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.632895] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.646322] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.652049] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.658160] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.663537] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.673274] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.695266] Waiting for root device /dev/mmcblk0p1... [ 1.699118] mmc0: tuning execution failed: -5 [ 1.703203] mmc0: error -5 whilst initialising MMC card [ 2.572620] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.585889] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591346] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.597720] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603104] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:45]: got exception: timeout ~$off

[PYBOOT] [pi 01:46]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.522802] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529150] isl29018 7-0044: Failed to read 1: -6 [ 1.533734] isl29018 7-0044: regmap initialization fails: -6 [ 1.543964] NET: Registered protocol family 10 [ 1.548416] sit: IPv6 over IPv4 tunneling driver [ 1.551999] NET: Registered protocol family 17 [ 1.556003] can: controller area network core (rev 20120528 abi 9) [ 1.562190] NET: Registered protocol family 29 [ 1.566581] can: raw protocol (rev 20120528) [ 1.570830] can: broadcast manager protocol (rev 20120528 t) [ 1.576472] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582194] Key type dns_resolver registered [ 1.586522] ThumbEE CPU extension supported. [ 1.590420] Registering SWP/SWPB emulation handler [ 1.599618] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605095] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611461] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.616837] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.626914] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.632870] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.646298] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.652029] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.658135] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.663511] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.673255] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.695246] Waiting for root device /dev/mmcblk0p1... [ 1.699096] mmc0: tuning execution failed: -5 [ 1.703177] mmc0: error -5 whilst initialising MMC card [ 2.572600] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.585872] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591330] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.597703] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603087] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:55]: got exception: timeout ~$off

[PYBOOT] [pi 01:56]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.657012] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667536] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674018] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679436] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687909] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699826] mmc2: switch to bus width 8 failed [ 1.704377] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.710612] mmc2: switch to bus width 4 failed [ 1.715109] mmc2: new high speed MMC card at address 0001 [ 1.721341] hub 3-0:1.0: USB hub found [ 1.721659] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.729708] hub 3-0:1.0: 1 port detected [ 1.735539] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.742119] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.749497] mmcblk2: p3 [ 1.750020] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.750023] [drm] No driver support for vblank timestamp query. [ 1.773037] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.786708] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.795325] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.808111] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.827269] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.831737] mmc0: new SDIO card at address 0001 [ 1.855981] Console: switching to colour frame buffer device 170x48 [ 1.894634] drm drm: fb0: frame buffer device [ 1.913556] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.920360] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.938491] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.952678] vdd_1v5: disabling [ 1.955762] vdd_1v2: disabling [ 2.553107] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.564569] Waiting for root device /dev/mmcblk0p3... [ 58.558296] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:53]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.750403] Bluetooth: RFCOMM ver 1.11 [ 1.754213] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.759546] Bluetooth: BNEP socket layer initialized [ 1.764538] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.770483] Bluetooth: HIDP socket layer initialized [ 1.776061] Key type dns_resolver registered [ 1.781586] Registering SWP/SWPB emulation handler [ 1.797335] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.804096] VDDIO_HDMI: supplied by vdd_5v0 [ 1.808552] vdd_sys: supplied by vdd_5v0 [ 1.812602] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.817559] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.824163] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.834587] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.841047] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.846510] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.854494] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.871536] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.879937] hub 3-0:1.0: USB hub found [ 1.883747] hub 3-0:1.0: 1 port detected [ 1.895355] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.901992] [drm] No driver support for vblank timestamp query. [ 1.990423] Console: switching to colour frame buffer device 170x48 [ 2.010211] drm drm: fb0: frame buffer device [ 2.041525] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.048808] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.056982] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.077153] vdd_1v5: disabling [ 2.080218] vdd_1v2: disabling [ 2.083422] ALSA device list: [ 2.086382] #0: NVIDIA Tegra Seaboard [ 2.419447] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.430564] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.937316] ledtrig-cpu: registered to indicate activity on CPUs [ 2.944793] usbcore: registered new interface driver usbhid [ 2.950439] usbhid: USB HID core driver [ 2.973693] NET: Registered protocol family 10 [ 3.065307] sit: IPv6 over IPv4 tunneling driver [ 3.072204] NET: Registered protocol family 17 [ 3.076812] can: controller area network core (rev 20120528 abi 9) [ 3.083251] NET: Registered protocol family 29 [ 3.087799] can: raw protocol (rev 20120528) [ 3.092163] can: broadcast manager protocol (rev 20120528 t) [ 3.097930] can: netlink gateway (rev 20130117) max_hops=1 [ 3.105072] Key type dns_resolver registered [ 3.110076] ThumbEE CPU extension supported. [ 3.114471] Registering SWP/SWPB emulation handler [ 3.186279] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 3.205078] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.215179] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 3.222320] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 3.229461] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 3.236541] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 3.259063] db8500-esram12: disabling [ 3.319213] db8500-esram34: disabling [ 3.339477] V-CSI/DSI: disabling [ 3.343749] mmci-reg: disabling [ 3.355255] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 3.361389] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 3.380432] Waiting for root device /dev/mmcblk0p4... [ 4.123199] mmc3: new high speed MMC card at address 0001 [ 4.134552] mmcblk3: mmc3:0001 3.53 GiB [ 4.144927] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 4.159729] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 4.169494] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 4.180969] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:05]: got exception: timeout ~$off

[PYBOOT] [snowball 02:06]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.578643] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.589416] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.599365] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.610107] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.633636] NET: Registered protocol family 10 [ 2.639221] sit: IPv6 over IPv4 tunneling driver [ 2.645416] NET: Registered protocol family 17 [ 2.649932] NET: Registered protocol family 35 [ 2.654602] NET: Registered protocol family 37 [ 2.659240] Registering SWP/SWPB emulation handler [ 2.665588] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.671874] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.678436] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.685485] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-24 16:34:24 UTC (956594064) [ 2.694671] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.701690] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.708648] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.715637] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.729187] db8500-esram12: disabling [ 2.732971] db8500-esram34: disabling [ 2.736877] V-CSI/DSI: disabling [ 2.740142] mmci-reg: disabling [ 2.743469] ALSA device list: [ 2.746429] #0: MOP500-card [ 2.749786] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.755767] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.761932] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:53]: got exception: timeout ~$off

[PYBOOT] [snowball 01:54]: Done.