Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7-156-g1875946/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.71 bbb arm-multi_v7_defconfig : FAILED 2:04.73 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.47 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:45.43 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:50.39 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.36 cosmic arm-multi_v7_defconfig : FAILED 2:09.46 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.30 dalmore arm-multi_v7_defconfig : FAILED 2:02.45 dalmore arm-multi_lpae_defconfig : FAILED 2:04.78 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.12 omap5uevm arm-multi_v7_defconfig : FAILED 2:08.14 omap5uevm arm-multi_lpae_defconfig : FAILED 2:09.98 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:49.29 seaboard arm-multi_v7_defconfig : FAILED 1:56.03 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:55.33 snowball arm-multi_v7_defconfig : FAILED 2:07.88 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:15.16 arndale arm-exynos_defconfig : passed 1:29.19 arndale arm-multi_v7_defconfig : passed 1:22.94 arndale arm-multi_lpae_defconfig : passed 1:31.86 capri arm-bcm_defconfig : passed 0:51.87 capri arm-multi_v7_defconfig : passed 0:53.45 chitra powerpc-ppc64_defconfig : passed 2:11.81 colombus arm-sunxi_defconfig : passed 2:25.75 colombus arm-multi_v7_defconfig : passed 2:35.52 colombus arm-multi_lpae_defconfig : passed 2:35.06 cubie arm-sunxi_defconfig : passed 0:51.79 cubie arm-multi_v7_defconfig : passed 0:51.09 cubie2 arm-sunxi_defconfig : passed 0:49.70 cubie2 arm-multi_v7_defconfig : passed 1:00.33 cubie2 arm-multi_lpae_defconfig : passed 0:51.10 cubox arm-multi_v7_defconfig : passed 1:08.58 cubox arm-mvebu_v7_defconfig : passed 1:09.91 hummingboard arm-imx_v6_v7_defconfig : passed 1:26.27 hummingboard arm-multi_v7_defconfig : passed 1:30.56 jetsontk1 arm-tegra_defconfig : passed 1:36.25 jetsontk1 arm-multi_v7_defconfig : passed 1:41.63 jetsontk1 arm-multi_lpae_defconfig : passed 1:44.43 omap5uevm arm-omap2plus_defconfig : passed 1:03.82 pandaes arm-omap2plus_defconfig : warnings 1:44.78 pandaes arm-multi_v7_defconfig : passed 1:43.64 pi arm-exynos_defconfig : passed 2:13.68 pi arm-multi_v7_defconfig : passed 2:24.88 pi arm-multi_lpae_defconfig : passed 2:22.09 pit arm-exynos_defconfig : passed 2:10.36 pit arm-multi_v7_defconfig : passed 2:17.65 pit arm-multi_lpae_defconfig : passed 2:23.66 seattle arm64-defconfig : warnings 2:18.31 snow arm-exynos_defconfig : passed 2:10.24 snow arm-multi_v7_defconfig : passed 2:03.07 snow arm-multi_lpae_defconfig : passed 1:58.47 trimslice arm-tegra_defconfig : passed 1:31.61 trimslice arm-multi_v7_defconfig : passed 1:41.48 wandboard arm-imx_v6_v7_defconfig : passed 1:15.06 wandboard arm-multi_v7_defconfig : passed 1:18.30
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.59 beaver arm-multi_v7_defconfig : OFFLINE 2:19.93 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:14.69 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:27.39 parallella arm-multi_v7_defconfig : OFFLINE 2:18.95 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:54.31 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:02.66 sama5 arm-sama5_defconfig : OFFLINE 2:21.37 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:12.26 socfpga arm-socfpga_defconfig : OFFLINE 2:23.64 socfpga arm-multi_v7_defconfig : OFFLINE 2:20.82
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.631331] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641622] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648722] usbcore: registered new interface driver usbhid [ 1.654647] usbhid: USB HID core driver [ 1.666706] NET: Registered protocol family 10 [ 1.673286] sit: IPv6 over IPv4 tunneling driver [ 1.679432] NET: Registered protocol family 17 [ 1.684211] can: controller area network core (rev 20120528 abi 9) [ 1.690847] NET: Registered protocol family 29 [ 1.695570] can: raw protocol (rev 20120528) [ 1.700090] can: broadcast manager protocol (rev 20120528 t) [ 1.706084] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712843] Key type dns_resolver registered [ 1.717741] omap_voltage_late_init: Voltage driver support not added [ 1.726017] ThumbEE CPU extension supported. [ 1.730646] Registering SWP/SWPB emulation handler [ 1.772807] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779333] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787108] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795783] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803693] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811511] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819322] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826673] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835367] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843277] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.853007] mmc1: new high speed MMC card at address 0001 [ 1.860250] hctosys: unable to open rtc device (rtc0) [ 1.873251] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879285] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886261] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895102] mmcblk1: p1 p2 [ 1.900810] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:03]: got exception: timeout ~$off
[PYBOOT] [bbb 02:04]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.031904] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.038020] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.044361] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.051238] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.060829] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.070326] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.077343] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.120780] ledtrig-cpu: registered to indicate activity on CPUs [ 2.129440] oprofile: using arm/armv7 [ 2.134537] Initializing XFRM netlink socket [ 2.139618] NET: Registered protocol family 10 [ 2.150285] sit: IPv6 over IPv4 tunneling driver [ 2.159058] NET: Registered protocol family 17 [ 2.163980] NET: Registered protocol family 15 [ 2.169199] Key type dns_resolver registered [ 2.174129] omap_voltage_late_init: Voltage driver support not added [ 2.180867] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.189332] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.199557] ThumbEE CPU extension supported. [ 2.204211] Registering SWP/SWPB emulation handler [ 2.209242] SmartReflex Class3 initialized [ 2.278725] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.286007] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.296530] mmc1: new high speed MMC card at address 0001 [ 2.308670] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.316943] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.324746] hctosys: unable to open rtc device (rtc0) [ 2.330199] sr_init: No PMIC hook to init smartreflex [ 2.335858] sr_init: platform driver register failed for SR [ 2.375593] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.383562] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.397901] mmcblk1: p1 p2 [ 2.415375] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.722157] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.729238] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.755434] rtc-ds1307 2-006f: SET TIME! [ 1.761176] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.767932] rtc-ds1307 2-006f: 64 bytes nvram [ 1.772547] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.780740] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.786525] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.794760] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.803934] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.810821] hub 1-0:1.0: USB hub found [ 1.814781] hub 1-0:1.0: 1 port detected [ 1.819168] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.824943] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.833046] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.842049] hub 2-0:1.0: USB hub found [ 1.846019] hub 2-0:1.0: 1 port detected [ 1.852031] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.886051] vdd_3v3: supplied by regen1 [ 1.924968] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.941921] aic_dvdd_fixed: disabling [ 1.946510] Waiting for root device /dev/mmcblk0p1... [ 1.976988] mmc1: new high speed MMC card at address 0001 [ 1.982954] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.987838] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.994186] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.001053] mmcblk1: p1 [ 2.124931] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.159958] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.185163] hub 2-1:1.0: USB hub found [ 2.189138] hub 2-1:1.0: 4 ports detected [ 2.281186] hub 1-1:1.0: USB hub found [ 2.285168] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.712478] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.719555] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745802] rtc-ds1307 2-006f: SET TIME! [ 1.751535] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758286] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762898] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.771092] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776879] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.785124] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794296] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.801170] hub 1-0:1.0: USB hub found [ 1.805125] hub 1-0:1.0: 1 port detected [ 1.809537] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815316] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823428] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832437] hub 2-0:1.0: USB hub found [ 1.836409] hub 2-0:1.0: 1 port detected [ 1.842420] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876440] vdd_3v3: supplied by regen1 [ 1.915519] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.933464] aic_dvdd_fixed: disabling [ 1.938205] Waiting for root device /dev/mmcblk0p1... [ 1.967369] mmc1: new high speed MMC card at address 0001 [ 1.973337] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.978219] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.984562] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.991458] mmcblk1: p1 [ 2.115305] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150328] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175550] hub 2-1:1.0: USB hub found [ 2.179520] hub 2-1:1.0: 4 ports detected [ 2.271573] hub 1-1:1.0: USB hub found [ 2.275558] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.174752] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181623] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.192015] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196880] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.203194] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.210046] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219636] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.229136] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.236197] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283576] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.289877] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296757] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306359] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315875] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322927] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329046] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335359] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342205] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351806] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361296] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368339] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375052] vdd_3v3: supplied by regen1 [ 2.413703] hctosys: unable to open rtc device (rtc0) [ 2.419014] sr_init: No PMIC hook to init smartreflex [ 2.424517] sr_init: platform driver register failed for SR [ 2.465321] mmc1: new high speed MMC card at address 0001 [ 2.472756] aic_dvdd_fixed: disabling [ 2.473211] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.473855] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.474527] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.484182] mmcblk1: p1 [ 2.496784] ldousb: disabling [ 2.502833] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.470345] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.544579] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.554898] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.629081] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.639397] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.713627] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.723953] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.798139] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.808464] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.882709] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.893044] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.967232] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.977556] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.051781] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.062105] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.136369] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.146688] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.220920] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.231268] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.305604] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.315927] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.390158] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.400480] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.474709] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.485024] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.559202] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.569519] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.643741] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.654062] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.728247] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.738564] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.812788] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.823110] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.078717] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.152696] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.162781] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.236769] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.246844] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.320822] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.330894] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.404873] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.414945] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.488927] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.499007] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.572991] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.583052] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.657041] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.667113] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.741090] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.751155] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.825133] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.835198] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.909182] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.919249] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.993232] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.003315] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.077307] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.087377] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.161357] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.171429] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.245407] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.255481] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.329462] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.339540] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.413518] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.423591] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:08]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.480897] Key type dns_resolver registered [ 2.487293] ThumbEE CPU extension supported. [ 2.491710] Registering SWP/SWPB emulation handler [ 2.517160] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.524978] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.536434] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.552561] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.559310] [drm] No driver support for vblank timestamp query. [ 2.584148] mmc1: new high speed MMC card at address 0001 [ 2.593996] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.602407] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.611828] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.621364] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.632943] mmcblk1: p1 [ 2.739107] Console: switching to colour frame buffer device 240x75 [ 2.826524] drm drm: fb0: frame buffer device [ 2.843643] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.853744] usb2_vbus: supplied by vdd-sys-5v0 [ 2.865382] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.870973] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.879824] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.893664] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.904124] hub 1-0:1.0: USB hub found [ 2.908126] hub 1-0:1.0: 1 port detected [ 2.918183] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.932041] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.994026] dvdd_ts: disabling [ 2.997128] usb1_vbus: disabling [ 3.000488] vdd_cam_1v8_reg: disabling [ 3.007826] Waiting for root device /dev/mmcblk0p1... [ 3.218670] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.197336] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 50.473621] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:03]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:04]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.464076] Key type dns_resolver registered [ 2.470528] ThumbEE CPU extension supported. [ 2.474946] Registering SWP/SWPB emulation handler [ 2.522606] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.528882] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.536445] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.553963] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.560798] [drm] No driver support for vblank timestamp query. [ 2.572793] mmc1: new high speed MMC card at address 0001 [ 2.582652] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.590046] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.597185] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.604344] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.614141] mmcblk1: p1 [ 2.739189] Console: switching to colour frame buffer device 240x75 [ 2.826171] drm drm: fb0: frame buffer device [ 2.848654] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.858841] usb2_vbus: supplied by vdd-sys-5v0 [ 2.869581] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.875222] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.884067] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.898693] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909213] hub 1-0:1.0: USB hub found [ 2.913218] hub 1-0:1.0: 1 port detected [ 2.924295] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.938477] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.000610] dvdd_ts: disabling [ 3.003830] usb1_vbus: disabling [ 3.007091] vdd_cam_1v8_reg: disabling [ 3.014534] Waiting for root device /dev/mmcblk0p1... [ 3.223696] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.180467] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.073160] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:00]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:01]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.667112] Bluetooth: RFCOMM ver 1.11 [ 2.671062] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.676458] Bluetooth: BNEP socket layer initialized [ 2.681551] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.687547] Bluetooth: HIDP socket layer initialized [ 2.694539] Key type dns_resolver registered [ 2.704236] Registering SWP/SWPB emulation handler [ 2.733955] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.739175] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.747767] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.770654] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.777308] [drm] No driver support for vblank timestamp query. [ 2.953697] Console: switching to colour frame buffer device 240x75 [ 3.040561] drm drm: fb0: frame buffer device [ 3.069456] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.076741] usb2_vbus: supplied by vdd-sys-5v0 [ 3.085174] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.091039] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.100161] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.119463] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.133511] hub 1-0:1.0: USB hub found [ 3.137471] hub 1-0:1.0: 1 port detected [ 3.151584] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.167115] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.262159] dvdd_ts: disabling [ 3.265266] usb1_vbus: disabling [ 3.268528] vdd_cam_1v8_reg: disabling [ 3.273347] ALSA device list: [ 3.276352] #0: NVIDIA Tegra Dalmore [ 3.282349] Waiting for root device /dev/mmcblk0p1... [ 3.459456] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.482881] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.603491] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.639859] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.647413] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.656323] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.687454] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.688627] usbcore: registered new interface driver usbhid [ 1.693868] usbhid: USB HID core driver [ 1.702580] NET: Registered protocol family 10 [ 1.703198] sit: IPv6 over IPv4 tunneling driver [ 1.706419] NET: Registered protocol family 17 [ 1.710446] NET: Registered protocol family 15 [ 1.714903] Key type dns_resolver registered [ 1.719234] Registering SWP/SWPB emulation handler [ 1.725036] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.729637] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.757972] max98090 1-0010: MAX98090 REVID=0x43 [ 1.760227] max98090 1-0010: use default 2.8v micbias [ 1.767354] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.770328] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.775567] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.785044] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.794716] mmc1: new DDR MMC card at address 0001 [ 1.799738] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.803863] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.809515] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.818757] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.824651] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.827110] VDD10_HDMI_1.0V: disabling [ 1.827770] vdd_g3d: disabling [ 1.828405] BUCK8_2.8V: disabling [ 1.829782] ALSA device list: [ 1.829787] #0: Odroid-U3 [ 1.847099] mmcblk1: p1 p2 [ 1.851268] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.762293] usbcore: registered new interface driver usbhid [ 1.768129] usbhid: USB HID core driver [ 1.776625] NET: Registered protocol family 10 [ 1.781554] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.788716] sit: IPv6 over IPv4 tunneling driver [ 1.794001] NET: Registered protocol family 17 [ 1.798671] can: controller area network core (rev 20120528 abi 9) [ 1.805187] NET: Registered protocol family 29 [ 1.809844] can: raw protocol (rev 20120528) [ 1.814308] can: broadcast manager protocol (rev 20120528 t) [ 1.820230] can: netlink gateway (rev 20130117) max_hops=1 [ 1.826258] Key type dns_resolver registered [ 1.830813] omap_vc_init_channel: No PMIC info for vdd_core [ 1.836652] omap_vp_init: No PMIC info for vdd_core [ 1.841762] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.847411] omap_vp_init: No PMIC info for vdd_mm [ 1.852332] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.858067] omap_vp_init: No PMIC info for vdd_mpu [ 1.863584] Power Management for TI OMAP4+ devices. [ 1.868819] ThumbEE CPU extension supported. [ 1.873309] Registering SWP/SWPB emulation handler [ 1.880402] palmas 0-0048: Irq flag is 0x00000000 [ 1.907025] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.917575] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.929044] mmc0: new high speed MMC card at address 0001 [ 1.935249] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.940149] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.946488] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.979119] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.005114] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.015187] smsc95xx v1.0.4 [ 2.046162] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.054063] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.755701] ledtrig-cpu: registered to indicate activity on CPUs [ 1.762263] usbcore: registered new interface driver usbhid [ 1.768090] usbhid: USB HID core driver [ 1.776592] NET: Registered protocol family 10 [ 1.781531] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.788690] sit: IPv6 over IPv4 tunneling driver [ 1.793981] NET: Registered protocol family 17 [ 1.798648] can: controller area network core (rev 20120528 abi 9) [ 1.805164] NET: Registered protocol family 29 [ 1.809823] can: raw protocol (rev 20120528) [ 1.814284] can: broadcast manager protocol (rev 20120528 t) [ 1.820209] can: netlink gateway (rev 20130117) max_hops=1 [ 1.826235] Key type dns_resolver registered [ 1.830790] omap_vc_init_channel: No PMIC info for vdd_core [ 1.836629] omap_vp_init: No PMIC info for vdd_core [ 1.841741] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.847386] omap_vp_init: No PMIC info for vdd_mm [ 1.852304] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.858044] omap_vp_init: No PMIC info for vdd_mpu [ 1.863557] Power Management for TI OMAP4+ devices. [ 1.868784] ThumbEE CPU extension supported. [ 1.873273] Registering SWP/SWPB emulation handler [ 1.880396] palmas 0-0048: Irq flag is 0x00000000 [ 1.906989] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.917637] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.929051] mmc0: new high speed MMC card at address 0001 [ 1.935146] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.940069] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.946444] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.979075] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.005099] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.015151] smsc95xx v1.0.4 [ 2.046228] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz
[PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:07]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657185] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667655] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674132] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679553] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.688017] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699941] mmc2: switch to bus width 8 failed [ 1.704492] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.711130] mmc2: switch to bus width 4 failed [ 1.715639] mmc2: new high speed MMC card at address 0001 [ 1.715984] hub 3-0:1.0: USB hub found [ 1.716035] hub 3-0:1.0: 1 port detected [ 1.729882] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.730875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.730878] [drm] No driver support for vblank timestamp query. [ 1.750591] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.757299] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.764653] mmcblk2: p3 [ 1.786315] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.794197] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.797080] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.804448] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.823595] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.828047] mmc0: new SDIO card at address 0001 [ 1.833052] Console: switching to colour frame buffer device 170x48 [ 1.888279] drm drm: fb0: frame buffer device [ 1.903672] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.910481] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.917547] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.931640] vdd_1v5: disabling [ 1.934719] vdd_1v2: disabling [ 2.562046] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.573476] Waiting for root device /dev/mmcblk0p3... [ 58.573614] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:53]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:54]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.625622] Bluetooth: RFCOMM ver 1.11 [ 1.629448] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.634776] Bluetooth: BNEP socket layer initialized [ 1.639768] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.645707] Bluetooth: HIDP socket layer initialized [ 1.651212] Key type dns_resolver registered [ 1.656549] Registering SWP/SWPB emulation handler [ 1.671216] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.677930] VDDIO_HDMI: supplied by vdd_5v0 [ 1.682400] vdd_sys: supplied by vdd_5v0 [ 1.686403] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.691379] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.697918] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.708311] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.714803] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.720839] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.728793] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.748471] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.756546] hub 3-0:1.0: USB hub found [ 1.760351] hub 3-0:1.0: 1 port detected [ 1.771067] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.777668] [drm] No driver support for vblank timestamp query. [ 1.876150] Console: switching to colour frame buffer device 170x48 [ 1.895947] drm drm: fb0: frame buffer device [ 1.928460] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.935569] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.943470] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.962385] vdd_1v5: disabling [ 1.965439] vdd_1v2: disabling [ 1.968650] ALSA device list: [ 1.971619] #0: NVIDIA Tegra Seaboard [ 2.298804] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.310006] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:48]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.912872] ledtrig-cpu: registered to indicate activity on CPUs [ 2.920379] usbcore: registered new interface driver usbhid [ 2.926055] usbhid: USB HID core driver [ 2.950134] NET: Registered protocol family 10 [ 2.957336] sit: IPv6 over IPv4 tunneling driver [ 2.962615] NET: Registered protocol family 17 [ 2.967102] can: controller area network core (rev 20120528 abi 9) [ 2.973358] NET: Registered protocol family 29 [ 2.977813] can: raw protocol (rev 20120528) [ 2.982116] can: broadcast manager protocol (rev 20120528 t) [ 2.987792] can: netlink gateway (rev 20130117) max_hops=1 [ 2.993865] Key type dns_resolver registered [ 2.998321] ThumbEE CPU extension supported. [ 3.002624] Registering SWP/SWPB emulation handler [ 3.013427] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 3.020294] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.029510] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 3.036529] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 3.043518] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 3.050506] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 3.063690] db8500-esram12: disabling [ 3.067596] db8500-esram34: disabling [ 3.072021] V-CSI/DSI: disabling [ 3.075561] mmci-reg: disabling [ 3.081359] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 3.087524] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 3.096405] Waiting for root device /dev/mmcblk0p4... [ 3.129058] mmc3: new high speed MMC card at address 0001 [ 3.135467] mmcblk3: mmc3:0001 3.53 GiB [ 3.139923] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.145721] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.151550] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.158416] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:05]: got exception: timeout ~$off
[PYBOOT] [snowball 02:06]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.662353] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.673126] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.683074] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.693817] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.718170] NET: Registered protocol family 10 [ 2.723602] sit: IPv6 over IPv4 tunneling driver [ 2.729156] NET: Registered protocol family 17 [ 2.733673] NET: Registered protocol family 35 [ 2.738189] NET: Registered protocol family 37 [ 2.742767] Registering SWP/SWPB emulation handler [ 2.759399] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.766204] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.773529] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.780822] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-24 15:18:59 UTC (956589539) [ 2.790039] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.797027] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.804046] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.811035] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.824554] db8500-esram12: disabling [ 2.828338] db8500-esram34: disabling [ 2.832305] V-CSI/DSI: disabling [ 2.835571] mmci-reg: disabling [ 2.838867] ALSA device list: [ 2.841857] #0: MOP500-card [ 2.845184] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.851165] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.857360] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:53]: got exception: timeout ~$off
[PYBOOT] [snowball 01:54]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter