Failed boards:
apc vt8500_v6_v7_defconfig : FAILED 0:37.36 snow multi_v7_defconfig : FAILED 1:11.74 snow multi_lpae_defconfig : FAILED 1:11.79 snowball u8500_defconfig : FAILED 1:47.21 trimslice tegra_defconfig : FAILED 0:34.23 trimslice multi_v7_defconfig : FAILED 0:53.72
Successful boards:
arndale exynos_defconfig : passed 1:16.16 arndale multi_v7_defconfig : passed 1:37.32 arndale multi_lpae_defconfig : passed 1:24.14 bbb omap2plus_defconfig : passed 1:32.52 bbb multi_v7_defconfig : passed 1:28.14 beaver tegra_defconfig : passed 1:00.44 beaver multi_v7_defconfig : passed 1:05.64 capri bcm_defconfig : passed 0:40.30 capri multi_v7_defconfig : passed 0:40.21 cubie sunxi_defconfig : passed 1:08.76 cubie multi_v7_defconfig : passed 1:28.67 cubie2 sunxi_defconfig : passed 1:11.90 cubie2 multi_v7_defconfig : passed 1:47.88 cubie2 multi_lpae_defconfig : passed 1:26.08 cubox multi_v7_defconfig : passed 1:08.42 dalmore tegra_defconfig : passed 1:30.62 dalmore multi_v7_defconfig : passed 1:16.88 dalmore multi_lpae_defconfig : passed 1:25.42 hummingboard imx_v6_v7_defconfig : passed 1:29.14 hummingboard multi_v7_defconfig : passed 1:13.15 jetson tegra_defconfig : passed 1:07.26 jetson multi_v7_defconfig : passed 1:00.14 jetson multi_lpae_defconfig : passed 0:55.80 omap5uevm omap2plus_defconfig : warnings 1:04.39 omap5uevm multi_v7_defconfig : warnings 1:55.09 omap5uevm multi_lpae_defconfig : warnings 1:55.20 panda omap2plus_defconfig : warnings 1:29.71 panda multi_v7_defconfig : warnings 1:42.68 sama5 sama5_defconfig : warnings 1:57.59 seaboard tegra_defconfig : passed 1:01.82 seaboard multi_v7_defconfig : passed 1:07.46 snow exynos_defconfig : passed 1:18.18 snowball multi_v7_defconfig : passed 4:03.21 wandboard imx_v6_v7_defconfig : passed 1:01.73 wandboard multi_v7_defconfig : passed 1:03.79
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Board apc-vt8500_v6_v7_defconfig failure log: -------------------------------------------------
[ 0.870000] sit: IPv6 over IPv4 tunneling driver [ 0.870000] Key type dns_resolver registered [ 0.880000] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 [ 0.880000] vt8500-rtc d8100000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (9466[ 0.890000] Waiting for root device /dev/sda1... [ 1.040000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.190000] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1.200000] scsi0 : usb-storage 1-1:1.0 [ 2.240000] scsi scan: INQUIRY result too short (5), using 36 [ 2.240000] scsi 0:0:0:0: Direct-Access PQ: 0 ANSI: 0 [ 4.450000] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.450000] sd 0:0:0:0: [sda] 1 512-byte logical blocks: (512 B/512 B) [ 4.460000] sd 0:0:0:0: [sda] 0-byte physical blocks [ 4.470000] sd 0:0:0:0: [sda] Write Protect is off [ 4.470000] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 4.480000] sd 0:0:0:0: [sda] Asking for cache data failed [ 4.490000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.490000] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.540000] sda: sda1 [ 4.540000] sda: p1 start 2048 is beyond EOD, enabling native capacity [ 4.550000] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.560000] sda: sda1 [ 4.570000] sda: p1 start 2048 is beyond EOD, truncated [ 4.570000] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.590000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.590000] VFS: Cannot open root device "sda1" or unknown-block(8,1): error -6 [ 4.600000] Please append a correct "root=" boot option; here are the available partitions: [ 4.600000] 0800 0 sda driver: sd [ 4.610000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) [ 4.610000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc8-next-20140606 #1 [ 4.610000] [<c001243c>] (unwind_backtrace) from [<c0010cc4>] (show_stack+0x10/0x14) [ 4.610000] [<c0010cc4>] (show_stack) from [<c035cfec>] (panic+0x7c/0x1d8) [ 4.610000] [<c035cfec>] (panic) from [<c042d1f0>] (mount_block_root+0x188/0x22c) [ 4.610000] [<c042d1f0>] (mount_block_root) from [<c042d378>] (mount_root+0xe4/0x10c) [ 4.610000] [<c042d378>] (mount_root) from [<c042d4d0>] (prepare_namespace+0x130/0x190) [ 4.610000] [<c042d4d0>] (prepare_namespace) from [<c042ce8c>] (kernel_init_freeable+0x174/0x1b8) [ 4.610000] [<c042ce8c>] (kernel_init_freeable) from [<c035c960>] (kernel_init+0x8/0xec) [ 4.610000] [<c035c960>] (kernel_init) from [<c000e158>] (ret_from_fork+0x14/0x3c) [ 4.610000] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) ~$off # PYBOOT: Exception: panic Board snow-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2920.596874] Linux video capture interface: v2.00 [ 2920.596899] pps_core: LinuxPPS API ver. 1 registered [ 2920.596903] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 2920.596918] PTP clock support registered [ 2920.596957] EDAC MC: Ver: 3.0.0 [ 2920.597315] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597766] Switched to clocksource arch_sys_counter [ 2920.602043] NET: Registered protocol family 2 [ 2920.602292] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602329] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602403] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602430] TCP: reno registered [ 2920.602436] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602454] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602536] NET: Registered protocol family 1 [ 2920.602670] RPC: Registered named UNIX socket transport module. [ 2920.602675] RPC: Registered udp transport module. [ 2920.602679] RPC: Registered tcp transport module. [ 2920.602682] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2920.602693] PCI: CLS 0 bytes, default 64 [ 2920.603043] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 2920.603704] futex hash table entries: 512 (order: 3, 32768 bytes) [ 2920.609162] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2920.609517] NFS: Registering the id_resolver key type [ 2920.609534] Key type id_resolver registered [ 2920.609539] Key type id_legacy registered [ 2920.609567] msgmni has been set to 1464 [ 2920.609785] bounce: pool size: 64 pages [ 2920.609881] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2920.609889] io scheduler noop registered [ 2920.609895] io scheduler deadline registered [ 2920.609978] io scheduler cfq registered (default) [ 2920.612649] backlight supply power not found, using dummy regulator [ 2920.612702] pwm-backlight backlight: unable to request PWM, trying legacy API [ 2920.612708] pwm-backlight backlight: unable to request legacy PWM [ 2920.612746] platform backlight: Driver pwm-backlight requests probe deferral [ 2920.612934] simple-framebuffer bfc00000.framebuffer: framebuffer at 0xbfc00000, 0x202000 bytes, mapped to 0xf0400000 [ 2920.612941] simple-framebuffer bfc00000.framebuffer: format=r5g6b5, mode=1366x768x16, linelength=2732 [ 2920.615722] Console: switching~$off # PYBOOT: Exception: timeout Board snow-multi_v7_defconfig failure log: -------------------------------------------------
[ 2920.595868] vgaarb: loaded [ 2920.596153] SCSI subsystem initialized [ 2920.596232] libata version 3.00 loaded. [ 2920.596379] usbcore: registered new interface driver usbfs [ 2920.596409] usbcore: registered new interface driver hub [ 2920.596459] usbcore: registered new device driver usb [ 2920.596885] Linux video capture interface: v2.00 [ 2920.596907] pps_core: LinuxPPS API ver. 1 registered [ 2920.596911] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 2920.596927] PTP clock support registered [ 2920.596964] EDAC MC: Ver: 3.0.0 [ 2920.597314] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597774] Switched to clocksource arch_sys_counter [ 2920.602073] NET: Registered protocol family 2 [ 2920.602319] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602357] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602430] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602460] TCP: reno registered [ 2920.602467] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602484] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602566] NET: Registered protocol family 1 [ 2920.602738] RPC: Registered named UNIX socket transport module. [ 2920.602743] RPC: Registered udp transport module. [ 2920.602747] RPC: Registered tcp transport module. [ 2920.602751] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2920.602763] PCI: CLS 0 bytes, default 64 [ 2920.603106] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 2920.603760] futex hash table entries: 512 (order: 3, 32768 bytes) [ 2920.609092] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2920.609462] NFS: Registering the id_resolver key type [ 2920.609480] Key type id_resolver registered [ 2920.609484] Key type id_legacy registered [ 2920.609508] msgmni has been set to 1464 [ 2920.609723] bounce: pool size: 64 pages [ 2920.609822] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2920.609830] io scheduler noop registered [ 2920.609836] io scheduler deadline registered [ 2920.609920] io scheduler cfq registered (default) [ 2920.612612] backlight supply power not found, using dummy ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.736297] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.744232] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.756164] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.763458] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774963] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.783477] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.795410] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802734] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.814208] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.822021] HS USB OTG: no transceiver configured [ 3.826721] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.834564] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.842498] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.854431] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.861755] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.873229] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881744] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.893676] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.901000] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.912475] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.920288] HS USB OTG: no transceiver configured [ 3.925018] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932861] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940795] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.952728] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.960021] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.971496] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.980010] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.980041] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.980041] musb-hdrc musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.980102] HS USB OTG: no transceiver configured [ 3.980133] musb-hdrc musb-hdrc.26.auto: musb_init_controller failed with status -517 [ 3.980133] platform musb-hdrc.26.auto: Driver musb-hdrc requests probe deferral [ 3.980651] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.26.auto [ 3.980682] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.980682] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.980682] musb-ux500 musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.980712] Unable to handle kernel paging request at virtual address ffff20c8 ~$off # PYBOOT: Exception: timeout Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
[ 4.564119] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.573934] sda: sda1 [ 4.576412] sda: p1 start 62 is beyond EOD, enabling native capacity [ 4.584602] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.594273] sda: sda1 [ 4.596768] sda: p1 start 62 is beyond EOD, truncated [ 4.604603] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.613229] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.618271] VFS: Cannot open root device "sda1" or unknown-block(8,1): error -6 [ 4.625694] Please append a correct "root=" boot option; here are the available partitions: [ 4.634155] 0800 0 sda driver: sd [ 4.638874] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) [ 4.647159] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc8-next-20140606 #1 [ 4.654721] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 4.662502] [<c0211c68>] (show_stack) from [<c0817cac>] (dump_stack+0x88/0x98) [ 4.669771] [<c0817cac>] (dump_stack) from [<c0814afc>] (panic+0xa0/0x218) [ 4.676691] [<c0814afc>] (panic) from [<c0ae10b0>] (mount_block_root+0x1a0/0x230) [ 4.684202] [<c0ae10b0>] (mount_block_root) from [<c0ae1248>] (mount_root+0x108/0x110) [ 4.692144] [<c0ae1248>] (mount_root) from [<c0ae13a8>] (prepare_namespace+0x158/0x1a0) [ 4.700177] [<c0ae13a8>] (prepare_namespace) from [<c0ae0d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 4.709076] [<c0ae0d6c>] (kernel_init_freeable) from [<c0812dd4>] (kernel_init+0x8/0xf0) [ 4.717196] [<c0812dd4>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 4.724780] CPU1: stopping [ 4.727520] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc8-next-20140606 #1 [ 4.735064] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 4.742843] [<c0211c68>] (show_stack) from [<c0817cac>] (dump_stack+0x88/0x98) [ 4.750091] [<c0817cac>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 4.757511] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 4.765099] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 4.772586] Exception stack(0xea087f68 to 0xea087fb0) [ 4.777658] 7f60: 00000000 c0bc9f8c c0bc9f8c 0000004c 195600d0 00000001 [ 4.785853] 7f80: 199c1e08 00000001 eafbada8 ea086000 00000000 c0825054 00000015 ea087fb0 [ 4.794036] 7fa0: c06b43dc c06b43e8 60000113 ffffffff [ 4.799130] [<c02127c0>] (__irq_svc) from [<c06b43e8>] (cpuidle_enter_state+0x68/0x100) [ 4.807177] [<c06b43e8>] (cpuidle_enter_state) from [<c027f25c>] (cpu_startup_entry+0x1ec/0x210) [ 4.815984] [<c027f25c>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 4.822777] drm_kms_helper: panic occurred, switching back to text console [ 4.829722] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) ~$off # PYBOOT: Exception: panic Board trimslice-tegra_defconfig failure log: -------------------------------------------------
[ 4.885651] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.896463] sda: sda1 [ 4.899089] sda: p1 start 62 is beyond EOD, enabling native capacity [ 4.907629] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.917807] sda: sda1 [ 4.920394] sda: p1 start 62 is beyond EOD, truncated [ 4.930267] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. [ 4.939399] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.945175] VFS: Cannot open root device "sda1" or unknown-block(8,1): error -6 [ 4.952568] Please append a correct "root=" boot option; here are the available partitions: [ 4.960995] 0800 0 sda driver: sd [ 4.965657] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) [ 4.973926] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc8-next-20140606 #1 [ 4.981462] [<c0015ef4>] (unwind_backtrace) from [<c0011a38>] (show_stack+0x10/0x14) [ 4.989222] [<c0011a38>] (show_stack) from [<c05cab34>] (dump_stack+0xa0/0xd8) [ 4.996466] [<c05cab34>] (dump_stack) from [<c05c8088>] (panic+0xa0/0x210) [ 5.003369] [<c05c8088>] (panic) from [<c07ff0c0>] (mount_block_root+0x1a0/0x230) [ 5.010866] [<c07ff0c0>] (mount_block_root) from [<c07ff258>] (mount_root+0x108/0x110) [ 5.018793] [<c07ff258>] (mount_root) from [<c07ff3b8>] (prepare_namespace+0x158/0x1a0) [ 5.026808] [<c07ff3b8>] (prepare_namespace) from [<c07fed7c>] (kernel_init_freeable+0x1c8/0x1d8) [ 5.035688] [<c07fed7c>] (kernel_init_freeable) from [<c05c6374>] (kernel_init+0x8/0xf0) [ 5.043789] [<c05c6374>] (kernel_init) from [<c000e778>] (ret_from_fork+0x14/0x3c) [ 5.051365] CPU1: stopping [ 5.054090] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc8-next-20140606 #1 [ 5.061607] [<c0015ef4>] (unwind_backtrace) from [<c0011a38>] (show_stack+0x10/0x14) [ 5.069364] [<c0011a38>] (show_stack) from [<c05cab34>] (dump_stack+0xa0/0xd8) [ 5.076594] [<c05cab34>] (dump_stack) from [<c00146f8>] (handle_IPI+0x148/0x15c) [ 5.083997] [<c00146f8>] (handle_IPI) from [<c0008764>] (gic_handle_irq+0x58/0x5c) [ 5.091577] [<c0008764>] (gic_handle_irq) from [<c00125c0>] (__irq_svc+0x40/0x70) [ 5.099052] Exception stack(0xea879f68 to 0xea879fb0) [ 5.104111] 9f60: 00000000 c0850590 c0850590 0000004c 2c69c6e8 00000001 [ 5.112291] 9f80: 2c9aa6a0 00000001 eafb9e88 ea878000 00000000 c05d522c 00000015 ea879fb0 [ 5.120463] 9fa0: c03d2470 c03d247c 60000113 ffffffff [ 5.125544] [<c00125c0>] (__irq_svc) from [<c03d247c>] (cpuidle_enter_state+0x68/0x100) [ 5.133574] [<c03d247c>] (cpuidle_enter_state) from [<c005d8a8>] (cpu_startup_entry+0x1ec/0x210) [ 5.142366] [<c005d8a8>] (cpu_startup_entry) from [<00008804>] (0x8804) [ 5.148978] drm_kms_helper: panic occurred, switching back to text console [ 5.155903] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) ~$off # PYBOOT: Exception: panic