Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160712/
Failed boards:
arndale arm-exynos_defconfig : FAILED 2:20.85 arndale arm-multi_v7_defconfig : FAILED 2:25.83 arndale arm-multi_lpae_defconfig : FAILED 2:25.68 arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:43.87 beaver arm-multi_v7_defconfig : FAILED 1:47.33 beaver multi_v7_nosmp_defconfig : NO BUILD capri bcm_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-ppc64_defconfig : FAILED 1:46.78 colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:54.63 omap5uevm arm-multi_v7_defconfig : FAILED 0:49.50 omap5uevm arm-multi_lpae_defconfig : FAILED 0:47.79 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:48.82 pi arm-multi_lpae_defconfig : FAILED 1:54.26 pi multi_v7_nosmp_defconfig : NO BUILD pit arm-exynos_defconfig : FAILED 1:49.05 pit arm-multi_v7_defconfig : FAILED 2:07.50 pit arm-multi_lpae_defconfig : FAILED 1:53.34 pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow arm-exynos_defconfig : FAILED 2:03.31 snow arm-multi_v7_defconfig : FAILED 2:05.42 snow arm-multi_lpae_defconfig : FAILED 2:04.59 snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 3:00.46 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:18.49 bbb arm-omap2plus_defconfig : passed 1:45.02 bbb arm-multi_v7_defconfig : passed 1:15.37 beagleboard-x15 arm-omap2plus_defconfig : passed 0:53.06 beagleboard-x15 arm-multi_v7_defconfig : passed 0:44.32 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:48.85 capri arm-multi_v7_defconfig : passed 0:50.22 chitra powerpc-pasemi_defconfig : passed 1:54.36 colombus arm-sunxi_defconfig : passed 2:29.86 colombus arm-multi_v7_defconfig : passed 2:33.43 colombus arm-multi_lpae_defconfig : passed 2:27.91 cosmic arm-imx_v6_v7_defconfig : passed 3:23.90 cosmic arm-multi_v7_defconfig : passed 2:57.67 cubie arm-sunxi_defconfig : passed 0:50.59 cubie arm-multi_v7_defconfig : passed 1:10.77 cubie2 arm-sunxi_defconfig : passed 0:50.29 cubie2 arm-multi_v7_defconfig : passed 1:05.22 cubie2 arm-multi_lpae_defconfig : passed 0:52.64 cubox arm-multi_v7_defconfig : passed 1:15.17 cubox arm-mvebu_v7_defconfig : passed 1:01.07 dalmore arm-tegra_defconfig : passed 1:25.72 dalmore arm-multi_v7_defconfig : passed 1:24.69 dalmore arm-multi_lpae_defconfig : passed 1:21.72 jetsontk1 arm-tegra_defconfig : passed 0:50.40 jetsontk1 arm-multi_v7_defconfig : passed 0:48.17 jetsontk1 arm-multi_lpae_defconfig : passed 0:56.67 omap5uevm arm-omap2plus_defconfig : passed 1:06.80 pandaes arm-omap2plus_defconfig : warnings 1:42.95 pandaes arm-multi_v7_defconfig : passed 1:36.84 parallella arm-multi_v7_defconfig : passed 2:47.32 seaboard arm-tegra_defconfig : passed 1:07.45 seaboard arm-multi_v7_defconfig : passed 0:59.35 seattle arm64-defconfig : warnings 2:32.51 snowball arm-u8500_defconfig : passed 1:09.47 snowball arm-multi_v7_defconfig : passed 1:14.18 trimslice arm-tegra_defconfig : passed 2:56.33 wandboard arm-multi_v7_defconfig : passed 1:03.53
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:21.28 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:33.99 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:16.97 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.33 pi arm-multi_v7_defconfig : OFFLINE 2:18.05 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:46.75 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:46.89 sama5 arm-sama5_defconfig : OFFLINE 2:17.54 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:15.20 socfpga arm-socfpga_defconfig : OFFLINE 2:27.08 socfpga arm-multi_v7_defconfig : OFFLINE 2:11.10 trimslice arm-multi_v7_defconfig : OFFLINE 2:13.30
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-arm-exynos_defconfig failure log: -------------------------------------------------
[ 69.741439] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 69.815462] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 69.824276] mmc0: error -22 whilst initialising MMC card [ 70.861435] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 70.935423] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 70.944230] mmc0: error -22 whilst initialising MMC card [ 71.981440] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 72.055467] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 72.064318] mmc0: error -22 whilst initialising MMC card [ 73.101437] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 73.175424] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 73.184235] mmc0: error -22 whilst initialising MMC card [ 74.221438] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 74.294917] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 74.303532] mmc0: error -22 whilst initialising MMC card [ 75.341432] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 75.415430] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 75.424242] mmc0: error -22 whilst initialising MMC card [ 76.461435] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 76.535435] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 76.544543] mmc0: error -22 whilst initialising MMC card [ 77.581437] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 77.655670] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 77.664473] mmc0: error -22 whilst initialising MMC card [ 78.701432] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 78.775434] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 78.784274] mmc0: error -22 whilst initialising MMC card [ 79.821419] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 79.895420] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 79.904229] mmc0: error -22 whilst initialising MMC card
[PYBOOT] [arndale 02:18]: Timed out waiting for "<type 'str'>": [ 80.941672] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 81.015098] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 81.023798] mmc0: error -22 whilst initialising MMC card
[PYBOOT] [arndale 02:19]: got exception: timeout ~$off
[PYBOOT] [arndale 02:20]: Done.
========================================================================
Board arndale-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 69.420312] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 69.429171] mmc0: error -22 whilst initialising MMC card [ 70.466408] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 70.540326] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 70.549174] mmc0: error -22 whilst initialising MMC card [ 71.586413] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 71.660308] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 71.669278] mmc0: error -22 whilst initialising MMC card [ 72.706412] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 72.780355] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 72.789286] mmc0: error -22 whilst initialising MMC card [ 73.826412] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 73.900326] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 73.909199] mmc0: error -22 whilst initialising MMC card [ 74.946407] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 75.020021] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 75.028709] mmc0: error -22 whilst initialising MMC card [ 76.066413] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 76.140019] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 76.148708] mmc0: error -22 whilst initialising MMC card [ 77.186411] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 77.260331] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 77.269210] mmc0: error -22 whilst initialising MMC card [ 78.306412] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 78.380336] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 78.389208] mmc0: error -22 whilst initialising MMC card [ 79.426410] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 79.500189] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 79.508789] mmc0: error -22 whilst initialising MMC card [ 80.546408] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 80.620325] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 80.629197] mmc0: error -22 whilst initialising MMC card
[PYBOOT] [arndale 02:22]: Timed out waiting for "<type 'str'>": [ 81.666410] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[PYBOOT] [arndale 02:23]: got exception: timeout ~$off
[PYBOOT] [arndale 02:24]: Done.
========================================================================
Board arndale-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 69.420322] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 69.429184] mmc0: error -22 whilst initialising MMC card [ 70.466416] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 70.540029] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 70.548712] mmc0: error -22 whilst initialising MMC card [ 71.586413] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 71.660323] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 71.669292] mmc0: error -22 whilst initialising MMC card [ 72.706409] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 72.780339] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 72.789316] mmc0: error -22 whilst initialising MMC card [ 73.826412] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 73.900325] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 73.909192] mmc0: error -22 whilst initialising MMC card [ 74.946417] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 75.020037] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 75.028725] mmc0: error -22 whilst initialising MMC card [ 76.066420] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 76.140323] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 76.149202] mmc0: error -22 whilst initialising MMC card [ 77.186418] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 77.260316] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 77.269177] mmc0: error -22 whilst initialising MMC card [ 78.306415] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 78.380334] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 78.389204] mmc0: error -22 whilst initialising MMC card [ 79.426410] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 79.500364] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 79.509307] mmc0: error -22 whilst initialising MMC card [ 80.546418] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 80.620329] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 80.629182] mmc0: error -22 whilst initialising MMC card
[PYBOOT] [arndale 02:23]: Timed out waiting for "<type 'str'>": [ 81.666416] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[PYBOOT] [arndale 02:24]: got exception: timeout ~$off
[PYBOOT] [arndale 02:25]: Done.
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.290056] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.296575] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.303532] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.309121] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.316120] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.326122] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.337379] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.344000] [drm] No driver support for vblank timestamp query. [ 3.349936] drm drm: No connectors reported connected with modes [ 3.355942] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.380862] Console: switching to colour frame buffer device 128x48 [ 3.392992] drm drm: fb0: frame buffer device [ 3.413386] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.424168] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.430632] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.436043] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.443884] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.463397] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.470181] hub 1-0:1.0: USB hub found [ 3.473952] hub 1-0:1.0: 1 port detected [ 3.478927] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.484340] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.492071] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.508393] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.515060] hub 2-0:1.0: USB hub found [ 3.518832] hub 2-0:1.0: 1 port detected [ 3.527646] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.541392] vdd_sata,avdd_plle: disabling [ 3.546090] usb1_vbus: disabling [ 3.550180] Waiting for root device /dev/mmcblk0p1... [ 3.848400] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.836922] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 35.693694] random: nonblocking pool is initialized
[PYBOOT] [beaver 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:45]: got exception: timeout ~$off
[PYBOOT] [beaver 01:46]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 7.111336] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.116938] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 7.124462] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 7.134461] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.146832] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.153471] [drm] No driver support for vblank timestamp query. [ 7.159469] drm drm: No connectors reported connected with modes [ 7.165480] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.191335] Console: switching to colour frame buffer device 128x48 [ 7.203134] drm drm: fb0: frame buffer device [ 7.240860] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 7.250025] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 7.256525] tegra-ehci 7d004000.usb: EHCI Host Controller [ 7.261958] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 7.269923] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 7.300866] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 7.308506] hub 1-0:1.0: USB hub found [ 7.312308] hub 1-0:1.0: 1 port detected [ 7.317115] tegra-ehci 7d008000.usb: EHCI Host Controller [ 7.322539] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 7.330412] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 7.360855] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 7.368337] hub 2-0:1.0: USB hub found [ 7.372123] hub 2-0:1.0: 1 port detected [ 7.380315] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 7.398686] vdd_sata,avdd_plle: disabling [ 7.403185] usb1_vbus: disabling [ 7.406579] ALSA device list: [ 7.409535] #0: NVIDIA Tegra Beaver [ 7.413751] Waiting for root device /dev/mmcblk0p1... [ 7.730862] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.816308] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>": [ 80.111163] random: nonblocking pool is initialized
[PYBOOT] [beaver 01:42]: got exception: timeout ~$off
[PYBOOT] [beaver 01:43]: Done.
========================================================================
Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------
Sorting __ex_table... Memory: 4023808K/4194304K available (9984K kernel code, 1724K rwdata, 3412K rodata, 4164K init, 1010K bss, 170496K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... Brought up 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (22) used greatest stack depth: 13008 bytes left NET: Registered protocol family 16 eeh_init: Platform EEH operation not found IBM eBus Device Driver kworker/u4:1 (30) used greatest stack depth: 12992 bytes left cpuidle: using governor menu kworker/u4:0 (39) used greatest stack depth: 12336 bytes l [PYBOOT] [chitra 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [chitra 01:45]: got exception: timeout ~$off
[PYBOOT] [chitra 01:46]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.880107] NET: Registered protocol family 17 [ 1.881157] NET: Registered protocol family 15 [ 1.885616] Key type dns_resolver registered [ 1.889954] Registering SWP/SWPB emulation handler [ 1.897874] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.902549] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.909924] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.917071] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.923838] [drm] No driver support for vblank timestamp query. [ 1.929597] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.936602] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.936642] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.950753] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0 [ 1.950997] mmc_host mmc1: Regulator set error -22 - 3.3 V [ 1.951474] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.951768] mmc1: new DDR MMC card at address 0001 [ 1.952247] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.952463] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.952666] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.952869] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.953971] mmcblk1: p1 p2 [ 2.000930] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 2.037016] max98090 1-0010: MAX98090 REVID=0x43 [ 2.039322] max98090 1-0010: use default 2.8v micbias [ 2.047236] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.055658] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.090025] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:24 UTC (946688424) [ 2.107564] VDD10_HDMI_1.0V: disabling [ 2.108470] vdd_g3d: disabling [ 2.109323] BUCK8_P3V3: disabling [ 2.113290] ALSA device list: [ 2.114955] #0: Odroid-U3 [ 2.118602] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:52]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:54]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.016107] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.034509] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.042295] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.050182] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.060510] Unable to handle kernel NULL pointer dereference at virtual address 00000214 [ 2.068951] pgd = c0204000 [ 2.071767] [00000214] *pgd=00000000 [ 2.075495] Internal error: Oops: 5 [#1] SMP ARM [ 2.080309] Modules linked in: [ 2.083497] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.7.0-rc7-next-20160712 #1 [ 2.091212] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.097476] task: c1206400 ti: c1200000 task.ti: c1200000 [ 2.103112] PC is at do_page_fault+0x30/0x380 [ 2.107656] LR is at do_DataAbort+0x3c/0xb8 [ 2.112015] pc : [<c0317a18>] lr : [<c03012d8>] psr: 00000193 [ 2.112015] sp : c1202058 ip : ffffe000 fp : 83126e97 [ 2.123994] r10: 8d4fdf3b r9 : c1202000 r8 : 00000214 [ 2.129440] r7 : 00000005 r6 : c0317e00 r5 : 00000000 r4 : c1202148 [ 2.136249] r3 : c1202000 r2 : 00000193 r1 : 00000005 r0 : bf000000 [ 2.143055] Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.150585] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.156574] Process swapper/0 (pid: 0, stack limit = 0xc1200220) [ 2.162839] Stack: (0xc1202058 to 0xc1202000) [ 2.167388] [<c0317a18>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.175381] [<c03012d8>] (do_DataAbort) from [<c031c438>] (aurora_pa_range+0x3c/0xa0) [ 2.183551] Exception stack(0xc1202148 to 0xc1202190) [ 2.188818] 2140: 000004a0 00000005 60000193 c1202000 c1202288 00000000 [ 2.197353] 2160: c0317e00 00000005 000004a0 c1202000 8d4fdf3b 83126e97 ffffe000 c1202198 [ 2.205883] 2180: c03012d8 c0317a18 00000193 ffffffff [ 2.211154] [<c031c438>] (aurora_pa_range) from [<83126e97>] (0x83126e97) [ 2.218234] Code: e593500c e1a08000 e3120080 e1a07001 (e5956214) [ 2.224594] ---[ end trace b643ce54c34c4f39 ]--- [ 2.229406] Kernel panic - not syncing: Fatal exception in interrupt [ 3.049998] SMP: failed to stop secondary CPUs [ 3.054626] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:45]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:46]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.349250] [<c037a904>] (cpu_startup_entry) from [<c1000c50>] (start_kernel+0x374/0x380) [ 2.357786] [<c1000c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.364597] Code: e5133140 e1a0200d ee1dcf90 e083300c (e5933020) [ 2.370949] ---[ end trace a7f2a3c6b8e4c127 ]--- [ 2.375761] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.382754] CPU1: stopping [ 2.385575] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.7.0-rc7-next-20160712 #1 [ 2[ 2.395010] Unable to handle kernel paging request at virtual address 0000c00c [ 2.395011] pgd = c0204000 [ 2.395014] [0000c00c] *pgd=00000000 [ 2.395017] Internal error: Oops: 5 [#2] SMP ARM [ 2.395019] Modules linked in: [ 2.395022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.7.0-rc7-next-20160712 #1 [ 2.395023] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.395026] task: ee0779c0 ti: ee09a000 task.ti: ee09a000 [ 2.395035] PC is at __timer_const_udelay+0x8/0x1c [ 2.395043] LR is at wait_for_xmitr+0x5c/0xd8 [ 2.395047] pc : [<c0595b34>] lr : [<c06f6e10>] psr: 20000193 [ 2.395047] sp : ee09bd88 ip : 00000000 fp : 00000004 [ 2.395049] r10: 00000044 r9 : c0f6c000 r8 : 0000270f [ 2.395051] r7 : 00000005 r6 : 00063f98 r5 : ee2f7410 r4 : 00000000 [ 2.395052] r3 : 0000c000 r2 : 00000002 r1 : 0000002e r0 : c0f6c000 [ 2.395055] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.395057] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.395059] Process swapper/1 (pid: 0, stack limit = 0xee09a220) [ 2.395061] Stack: (0xee09bd88 to 0xee09c000) [ 2.395065] bd80: 0000002e ee2f7410 ee2f7410 c06f6e8c 00000000 c1315c04 [ 2.395069] bda0: 00000044 c06f6e9c c1315c0b c1315c48 ee2f7410 c06d42d8 ee2f7410 00000001 [ 2.395073] bdc0: 60000193 00000001 00000000 c06f6f64 00000001 c12a2960 c13156f0 ee09a000 [ 2.395077] bde0: c1316034 00000000 00000044 c06f6eb4 c13156f0 c0384838 c131d894 00000044 [ 2.395081] be00: 00000123 00000000 00000123 00000000 00005474 c03852a4 00000400 00000034 [ 2.395085] be20: 00000124 00000000 0000000f c13156f0 c1316030 00000000 60000193 c123714c [ 2.395089] be40: c0e696f0 00000001 ee09a000 c120243c 00000000 c1315c04 c13156f0 00000034 [ 2.395092] be60: c13156f0 c123714c c1318036 00000000 00000000 00000000 00000000 c0385864 [ 2.395097] be80: 00000000 00000000 00000000 00000000 c1318036 00000034 00000004 00000000 [ 2.395100] bea0: 60000193 00000000 00000 [PYBOOT] [omap5uevm 00:47]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:48]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.830181] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.836287] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations [ 2.836382] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 2.836487] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.859210] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.866388] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.871351] usb 1-1: Manufacturer: Generic [ 2.875262] usb 1-1: SerialNumber: 200901010001 [ 2.883379] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.916669] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.929747] mmc2: new high speed SDIO card at address 0001 [ 2.950716] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) [ 2.957097] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 2.964200] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.970789] [drm] No driver support for vblank timestamp query. [ 2.977526] exynos-dp 145b0000.dp-controller: EDID data does not include any extensions. [ 2.999667] exynos-dp 145b0000.dp-controller: Link Training Clock Recovery success [ 3.001443] exynos-dp 145b0000.dp-controller: Link Training success! [ 3.108173] exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok [ 3.108179] exynos-dp 145b0000.dp-controller: unable to config video [ 3.156236] Console: switching to colour frame buffer device 240x67 [ 3.205992] exynos-drm exynos-drm: fb0: frame buffer device [ 3.225149] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.230657] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.238008] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.268568] vdd_1v2_2: disabling [ 3.270545] TPS65090_RAILSDCDC3: disabling [ 3.274414] TPS65090_RAILSLDO1: disabling [ 3.278422] TPS65090_RAILSLDO2: disabling [ 3.283086] ALSA device list: [ 3.285360] #0: Peach-Pi-I2S-MAX98091 [ 3.290348] Waiting for root device /dev/mmcblk0p1... [ 15.915408] random: nonblocking pool is initialized
[PYBOOT] [pi 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:47]: got exception: timeout ~$off
[PYBOOT] [pi 01:48]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.527059] usbcore: registered new interface driver usbhid [ 1.532348] usbhid: USB HID core driver [ 1.536225] isl29018 7-0044: No cache defaults, reading back from HW [ 1.542599] isl29018 7-0044: Failed to read 1: -6 [ 1.547183] isl29018 7-0044: regmap initialization fails: -6 [ 1.558385] NET: Registered protocol family 10 [ 1.561585] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.570101] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.574962] NET: Registered protocol family 17 [ 1.578984] can: controller area network core (rev 20120528 abi 9) [ 1.585174] NET: Registered protocol family 29 [ 1.589561] can: raw protocol (rev 20120528) [ 1.593810] can: broadcast manager protocol (rev 20160617 t) [ 1.599452] can: netlink gateway (rev 20130117) max_hops=1 [ 1.605173] Key type dns_resolver registered [ 1.609512] ThumbEE CPU extension supported. [ 1.613421] Registering SWP/SWPB emulation handler [ 1.626963] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.632423] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.638800] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.644181] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.654257] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.668290] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.673944] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.680136] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.685506] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.695199] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.717367] Waiting for root device /dev/mmcblk0p1... [ 2.643732] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.661568] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.667029] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.673403] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.678786] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:52]: got exception: timeout ~$off
[PYBOOT] [pi 01:53]: Done.
========================================================================
Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.832242] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.839355] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.844253] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.850637] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations [ 2.850729] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 2.850826] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.872464] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) [ 2.872641] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 2.872646] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.872648] [drm] No driver support for vblank timestamp query. [ 2.893645] exynos-dp 145b0000.dp-controller: EDID data does not include any extensions. [ 2.907730] usb 1-1: Manufacturer: Generic [ 2.911842] usb 1-1: SerialNumber: 200901010001 [ 2.917392] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.956895] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.961420] mmc2: new high speed SDIO card at address 0001 [ 3.006386] exynos-dp 145b0000.dp-controller: Link Training Clock Recovery success [ 3.007964] exynos-dp 145b0000.dp-controller: Link Training success! [ 3.114333] exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok [ 3.114338] exynos-dp 145b0000.dp-controller: unable to config video [ 3.136919] Console: switching to colour frame buffer device 170x48 [ 3.200731] exynos-drm exynos-drm: fb0: frame buffer device [ 3.220138] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.225596] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.232783] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.259323] vdd_1v2_2: disabling [ 3.261281] TPS65090_RAILSDCDC3: disabling [ 3.265195] TPS65090_RAILSLDO1: disabling [ 3.269139] TPS65090_RAILSLDO2: disabling [ 3.273743] ALSA device list: [ 3.276104] #0: Peach-Pit-I2S-MAX98090 [ 3.281042] Waiting for root device /dev/mmcblk0p1... [ 5.315315] random: nonblocking pool is initialized
[PYBOOT] [pit 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:47]: got exception: timeout ~$off
[PYBOOT] [pit 01:48]: Done.
========================================================================
Board pit-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.527100] usbcore: registered new interface driver usbhid [ 1.532389] usbhid: USB HID core driver [ 1.536265] isl29018 7-0044: No cache defaults, reading back from HW [ 1.542641] isl29018 7-0044: Failed to read 1: -6 [ 1.547224] isl29018 7-0044: regmap initialization fails: -6 [ 1.558469] NET: Registered protocol family 10 [ 1.561666] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.570185] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.575050] NET: Registered protocol family 17 [ 1.579069] can: controller area network core (rev 20120528 abi 9) [ 1.585256] NET: Registered protocol family 29 [ 1.589645] can: raw protocol (rev 20120528) [ 1.593894] can: broadcast manager protocol (rev 20160617 t) [ 1.599536] can: netlink gateway (rev 20130117) max_hops=1 [ 1.605260] Key type dns_resolver registered [ 1.609597] ThumbEE CPU extension supported. [ 1.613506] Registering SWP/SWPB emulation handler [ 1.627083] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.632546] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.638920] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.644301] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.654395] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.668395] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.674041] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.680238] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.685608] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.695297] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.716836] Waiting for root device /dev/mmcblk0p1... [ 2.643773] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.661588] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.667045] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.673418] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.678801] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo
[PYBOOT] [pit 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:49]: got exception: timeout ~$off
[PYBOOT] [pit 01:50]: Done.
========================================================================
Board pit-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.527303] usbcore: registered new interface driver usbhid [ 1.532591] usbhid: USB HID core driver [ 1.536467] isl29018 7-0044: No cache defaults, reading back from HW [ 1.542843] isl29018 7-0044: Failed to read 1: -6 [ 1.547427] isl29018 7-0044: regmap initialization fails: -6 [ 1.558691] NET: Registered protocol family 10 [ 1.561910] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.570397] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.575261] NET: Registered protocol family 17 [ 1.579279] can: controller area network core (rev 20120528 abi 9) [ 1.585467] NET: Registered protocol family 29 [ 1.589856] can: raw protocol (rev 20120528) [ 1.594106] can: broadcast manager protocol (rev 20160617 t) [ 1.599749] can: netlink gateway (rev 20130117) max_hops=1 [ 1.605473] Key type dns_resolver registered [ 1.609809] ThumbEE CPU extension supported. [ 1.613717] Registering SWP/SWPB emulation handler [ 1.627322] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.632784] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.639156] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.644537] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.654632] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.668682] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.674330] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.680526] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.685897] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.695584] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.717139] Waiting for root device /dev/mmcblk0p1... [ 2.643959] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.661768] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.667230] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.673602] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.678986] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo
[PYBOOT] [pit 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 02:05]: got exception: timeout ~$off
[PYBOOT] [pit 02:06]: Done.
========================================================================
Board snow-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.785939] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 3.793901] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations [ 3.800153] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 3.807460] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 3.814914] of_get_named_gpiod_flags: parsed 'hpd-gpios' property of node '/soc/dp-controller@145B0000[0]' - status (0) [ 3.826193] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) [ 3.833374] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 3.840545] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.847138] [drm] No driver support for vblank timestamp query. [ 3.871741] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.884656] mmc2: new high speed SDIO card at address 0001 [ 4.080982] exynos-dp 145b0000.dp-controller: Link Training Clock Recovery success [ 4.082899] exynos-dp 145b0000.dp-controller: Link Training success! [ 4.191334] exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok [ 4.191348] exynos-dp 145b0000.dp-controller: unable to config video [ 4.220998] Console: switching to colour frame buffer device 170x48 [ 4.289157] exynos-drm exynos-drm: fb0: frame buffer device [ 4.310996] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 4.316615] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/power[0]' - status (0) [ 4.325372] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/lid-switch[0]' - status (0) [ 4.334929] gpio-143 (Power): gpiod_set_debounce: missing set() or set_debounce() operations [ 4.343421] gpio-161 (Lid): gpiod_set_debounce: missing set() or set_debounce() operations [ 4.352807] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 4.391049] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:35 UTC (946688435) [ 4.408942] TPS65090_RAILSDCDC1: disabling [ 4.411586] TPS65090_RAILSDCDC2: disabling [ 4.415639] TPS65090_RAILSDCDC3: disabling [ 4.420428] TPS65090_RAILSLDO1: disabling [ 4.423731] TPS65090_RAILSLDO2: disabling [ 4.428498] ALSA device list: [ 4.430655] #0: Snow-I2S-MAX98095 [ 4.434807] Waiting for root device /dev/mmcblk0p3... [ 4.641942] exynos-dp 145b0000.dp-controller: EDID data does not include any extensions.
[PYBOOT] [snow 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:01]: got exception: timeout ~$off
[PYBOOT] [snow 02:02]: Done.
========================================================================
Board snow-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.710225] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 1.716465] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 1.721858] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo [ 1.732254] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.738962] ledtrig-cpu: registered to indicate activity on CPUs [ 1.743763] usbcore: registered new interface driver usbhid [ 1.749054] usbhid: USB HID core driver [ 1.758262] NET: Registered protocol family 10 [ 1.761875] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.767689] NET: Registered protocol family 17 [ 1.771574] can: controller area network core (rev 20120528 abi 9) [ 1.777772] NET: Registered protocol family 29 [ 1.782155] can: raw protocol (rev 20120528) [ 1.786406] can: broadcast manager protocol (rev 20160617 t) [ 1.792054] can: netlink gateway (rev 20130117) max_hops=1 [ 1.797815] Key type dns_resolver registered [ 1.802126] ThumbEE CPU extension supported. [ 1.806034] Registering SWP/SWPB emulation handler [ 1.811929] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.820761] dwmmc_exynos 12230000.mmc: IDMAC supports 32-bit address mode. [ 1.827472] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 1.833817] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 1.839209] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo [ 1.839227] mmc0: error -22 whilst initialising MMC card [ 1.854048] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 1.879138] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 1.904156] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 1.911271] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.942327] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.950947] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 1.966985] vbat-supply: disabling [ 1.970677] Waiting for root device /dev/mmcblk0p3... [ 1.977017] mmc2: new high speed SDIO card at address 0001
[PYBOOT] [snow 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:02]: got exception: timeout ~$off
[PYBOOT] [snow 02:04]: Done.
========================================================================
Board snow-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.710246] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 1.716483] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 1.721877] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo [ 1.732269] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.739000] ledtrig-cpu: registered to indicate activity on CPUs [ 1.743800] usbcore: registered new interface driver usbhid [ 1.749090] usbhid: USB HID core driver [ 1.758297] NET: Registered protocol family 10 [ 1.761909] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.767700] NET: Registered protocol family 17 [ 1.771608] can: controller area network core (rev 20120528 abi 9) [ 1.777801] NET: Registered protocol family 29 [ 1.782191] can: raw protocol (rev 20120528) [ 1.786444] can: broadcast manager protocol (rev 20160617 t) [ 1.792088] can: netlink gateway (rev 20130117) max_hops=1 [ 1.797863] Key type dns_resolver registered [ 1.802150] ThumbEE CPU extension supported. [ 1.806069] Registering SWP/SWPB emulation handler [ 1.816276] dwmmc_exynos 12230000.mmc: IDMAC supports 32-bit address mode. [ 1.821740] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 1.828114] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 1.833498] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo [ 1.843056] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 1.850796] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.860095] mmc0: error -22 whilst initialising MMC card [ 1.864387] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 1.889161] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 1.896320] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.924513] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 1.936363] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.945125] vbat-supply: disabling [ 1.950150] Waiting for root device /dev/mmcblk0p3... [ 1.956435] mmc2: new high speed SDIO card at address 0001
[PYBOOT] [snow 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:03]: got exception: timeout ~$off
[PYBOOT] [snow 02:04]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
/getty"INIT: cannot execute "[ 22.632821] mmcblk0: error -110 sending status command, retrying /sbin/getty" cannot execute "/sbin/getty" INIT: Id "2" respa[ 22.642500] mmcblk0: error -110 sending status command, aborting wning too fast: disabled for 5 minutes [ 22.662020] mmcblk0: error -110 sending status command, retrying [ 22.672322] mmcblk0: error -110 sending status command, retrying [ 22.683584] mmcblk0: error -110 sending status command, aborting [ 22.697091] mmcblk0: error -110 sending status command, retrying [ 22.705456] mmcblk0: error -110 sending status command, retrying [ 22.713796] mmcblk0: error -110 sending status command, aborting [ 22.724656] mmcblk0: error -110 sending status command, retrying [ 22.732992] mmcblk0: error -110 sending status command, retrying [ 22.741352] mmcblk0: error -110 sending status command, aborting INIT: INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"cannot execute "/sbin/getty[ 22.758275] mmcblk0: error -110 sending status command, retrying "
INIT: cannot execute "[ 22.767103] mmcblk0: error -110 sending status command, retrying /sbin/getty" INIT: Id "5" resp[ 22.775994] mmcblk0: error -110 sending status command, aborting awning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" [ 22.831781] mmcblk0: error -110 sending status command, retrying [ 22.840173] mmcblk0: error -110 sending status command, retrying [ 22.848537] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 43.063949] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:58]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:59]: Done.