Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20141204/
Failed boards:
capri arm-bcm_defconfig : FAILED 0:25.52 capri arm-multi_v7_defconfig : FAILED 0:26.65 hummingboard arm-imx_v6_v7_defconfig : FAILED 1:01.56 hummingboard arm-multi_v7_defconfig : FAILED 0:56.89 minnowmax x86-minnowmax_defconfig : FAILED 0:39.16 pandaes arm-omap2plus_defconfig : FAILED 2:22.06 pandaes arm-multi_v7_defconfig : FAILED 3:03.29 sama5 arm-sama5_defconfig : BUILD FAILED socfpga arm-multi_v7_defconfig : FAILED 1:06.00 trimslice arm-tegra_defconfig : FAILED 1:48.17 trimslice arm-multi_v7_defconfig : FAILED 2:25.90 wandboard arm-imx_v6_v7_defconfig : FAILED 0:56.78 wandboard arm-multi_v7_defconfig : FAILED 0:58.63
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:17.72 arndale arm-exynos_defconfig : passed 1:26.92 arndale arm-multi_v7_defconfig : passed 1:16.66 arndale arm-multi_lpae_defconfig : passed 1:19.15 bbb arm-omap2plus_defconfig : passed 1:40.29 bbb arm-multi_v7_defconfig : passed 1:11.55 beaver arm-tegra_defconfig : passed 1:01.47 chitra powerpc-pasemi_defconfig : passed 0:48.43 chitra powerpc-ppc64_defconfig : warnings 1:51.70 colombus arm-sunxi_defconfig : passed 0:58.04 colombus arm-multi_v7_defconfig : passed 1:05.34 colombus arm-multi_lpae_defconfig : passed 1:06.76 cosmic arm-imx_v6_v7_defconfig : passed 1:55.19 cosmic arm-multi_v7_defconfig : passed 1:23.89 cubie arm-sunxi_defconfig : passed 1:08.51 cubie arm-multi_v7_defconfig : passed 1:01.57 cubie2 arm-sunxi_defconfig : passed 1:08.81 cubie2 arm-multi_v7_defconfig : passed 1:00.26 cubie2 arm-multi_lpae_defconfig : passed 0:59.40 cubox arm-multi_v7_defconfig : passed 1:13.26 cubox arm-mvebu_v7_defconfig : passed 1:04.00 dalmore arm-tegra_defconfig : passed 1:07.43 dalmore arm-multi_v7_defconfig : passed 1:05.13 dalmore arm-multi_lpae_defconfig : passed 1:41.88 jetsontk1 arm-tegra_defconfig : passed 0:50.56 jetsontk1 arm-multi_v7_defconfig : passed 0:50.91 jetsontk1 arm-multi_lpae_defconfig : passed 0:46.63 odroidu3 arm-exynos_defconfig : passed 1:02.70 omap5uevm arm-omap2plus_defconfig : warnings 1:05.36 omap5uevm arm-multi_v7_defconfig : passed 1:06.51 omap5uevm arm-multi_lpae_defconfig : passed 1:13.33 parallella arm-multi_v7_defconfig : passed 1:16.62 pi arm-exynos_defconfig : passed 1:07.15 pi arm-multi_v7_defconfig : passed 0:48.33 pi arm-multi_lpae_defconfig : passed 0:49.69 pit arm-exynos_defconfig : passed 1:01.31 pit arm-multi_v7_defconfig : passed 0:49.93 pit arm-multi_lpae_defconfig : passed 0:43.63 rk3288evb arm-multi_v7_defconfig : passed 0:55.93 rk3288evb arm-multi_lpae_defconfig : passed 0:56.41 seaboard arm-tegra_defconfig : passed 0:50.84 seaboard arm-multi_v7_defconfig : passed 1:34.07 snow arm-multi_v7_defconfig : passed 1:03.24 snowball arm-u8500_defconfig : passed 1:32.29 snowball arm-multi_v7_defconfig : passed 2:23.20 socfpga arm-socfpga_defconfig : passed 1:05.82
Offline boards:
beaver arm-multi_v7_defconfig : OFFLINE 1:23.76 snow arm-exynos_defconfig : OFFLINE 1:51.15 snow arm-multi_lpae_defconfig : OFFLINE 1:52.57
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board capri-arm-bcm_defconfig failure log: -------------------------------------------------
[ 1.110000] b305 4 mmcblk0p5 0b021c72-a727-983a-8c73-b02d50707a2d [ 1.110000] b306 128 mmcblk0p6 ea9a93fe-0a41-6d74-d352-af528d30d057 [ 1.120000] b307 16384 mmcblk0p7 43b9c433-a106-68bf-aff4-890416fc87d7 [ 1.120000] b308 2621440 mmcblk0p8 a64d7abc-da6b-db67-7ffd-d11699c89f64 [ 1.130000] b360 256 mmcblk0rpmb (driver?) [ 1.130000] b340 2048 mmcblk0boot1 (driver?) [ 1.140000] b320 2048 mmcblk0boot0 (driver?) [ 1.140000] No filesystem could mount root, tried: ext4 [ 1.150000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,8) [ 1.150000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc7-next-20141204 #1 [ 1.150000] Hardware name: BCM281xx Broadcom Application Processor [ 1.150000] [<c001435c>] (unwind_backtrace) from [<c001141c>] (show_stack+0x10/0x14) [ 1.150000] [<c001141c>] (show_stack) from [<c036bfcc>] (dump_stack+0x84/0xc4) [ 1.150000] [<c036bfcc>] (dump_stack) from [<c036a9c0>] (panic+0x9c/0x1f8) [ 1.150000] [<c036a9c0>] (panic) from [<c0489214>] (mount_block_root+0x2c8/0x2cc) [ 1.150000] [<c0489214>] (mount_block_root) from [<c04893d4>] (prepare_namespace+0x158/0x1a0) [ 1.150000] [<c04893d4>] (prepare_namespace) from [<c0488e30>] (kernel_init_freeable+0x1d4/0x1e4) [ 1.150000] [<c0488e30>] (kernel_init_freeable) from [<c0369de8>] (kernel_init+0x8/0xe8) [ 1.150000] [<c0369de8>] (kernel_init) from [<c000e678>] (ret_from_fork+0x14/0x3c) [ 1.150000] CPU1: stopping [ 1.150000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.18.0-rc7-next-20141204 #1 [ 1.150000] Hardware name: BCM281xx Broadcom Application Processor [ 1.150000] [<c001435c>] (unwind_backtrace) from [<c001141c>] (show_stack+0x10/0x14) [ 1.150000] [<c001141c>] (show_stack) from [<c036bfcc>] (dump_stack+0x84/0xc4) [ 1.150000] [<c036bfcc>] (dump_stack) from [<c001357c>] (handle_IPI+0x17c/0x18c) [ 1.150000] [<c001357c>] (handle_IPI) from [<c0008660>] (gic_handle_irq+0x58/0x5c) [ 1.150000] [<c0008660>] (gic_handle_irq) from [<c0011f40>] (__irq_svc+0x40/0x74) [ 1.150000] Exception stack(0xeec87f78 to 0xeec87fc0) [ 1.150000] 7f60: ffffffed 00000000 [ 1.150000] 7f80: 000004ea c0018e40 eec86000 c04be4b0 c0372768 00000000 00000000 00000000 [ 1.150000] 7fa0: ffffffed 00000000 c04bf01c eec87fc0 c000f154 c000f158 60000153 ffffffff [ 1.150000] [<c0011f40>] (__irq_svc) from [<c000f158>] (arch_cpu_idle+0x38/0x3c) [ 1.150000] [<c000f158>] (arch_cpu_idle) from [<c004d948>] (cpu_startup_entry+0x230/0x2dc) [ 1.150000] [<c004d948>] (cpu_startup_entry) from [<90008704>] (0x90008704) [ 1.150000] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,8)
[PYBOOT] [capri 00:22]: got exception: panic ~$off
[PYBOOT] [capri 00:24]: Done.
========================================================================
Board capri-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.755000] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.755000] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0 [ 0.755000] [<c0925c50>] (klist_add_tail) from [<c05c3a70>] (device_add+0x3dc/0x520) [ 0.755000] [<c05c3a70>] (device_add) from [<c05c3d40>] (device_create_groups_vargs+0xac/0xbc) [ 0.755000] [<c05c3d40>] (device_create_groups_vargs) from [<c05c3d70>] (device_create_vargs+0x20/0x28) [ 0.755000] [<c05c3d70>] (device_create_vargs) from [<c02d45a0>] (bdi_register+0x58/0xf0) [ 0.755000] [<c02d45a0>] (bdi_register) from [<c02d465c>] (bdi_register_dev+0x24/0x2c) [ 0.755000] [<c02d465c>] (bdi_register_dev) from [<c045dadc>] (add_disk+0x130/0x440) [ 0.755000] [<c045dadc>] (add_disk) from [<c05e04d0>] (loop_add+0x16c/0x1d8) [ 0.755000] [<c05e04d0>] (loop_add) from [<c0cb1d94>] (loop_init+0xf0/0x12c) [ 0.755000] [<c0cb1d94>] (loop_init) from [<c0208cd0>] (do_one_initcall+0x8c/0x1d4) [ 0.755000] [<c0208cd0>] (do_one_initcall) from [<c0c6fdb4>] (kernel_init_freeable+0x148/0x1e8) [ 0.755000] [<c0c6fdb4>] (kernel_init_freeable) from [<c0927bfc>] (kernel_init+0x8/0xe8) [ 0.755000] [<c0927bfc>] (kernel_init) from [<c020e8b8>] (ret_from_fork+0x14/0x3c) [ 0.755000] Code: e2852004 e2841004 e5842008 e985000a (e5832000) [ 0.760000] ---[ end trace aa38ebec2f2c1925 ]--- [ 0.760000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.760000] [ 0.760000] CPU1: stopping [ 0.760000] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.18.0-rc7-next-20141204 #1 [ 0.760000] Hardware name: BCM281xx Broadcom Application Processor [ 0.760000] [<c02161fc>] (unwind_backtrace) from [<c0211c20>] (show_stack+0x10/0x14) [ 0.760000] [<c0211c20>] (show_stack) from [<c092ad90>] (dump_stack+0x8c/0x9c) [ 0.760000] [<c092ad90>] (dump_stack) from [<c02149f4>] (handle_IPI+0x150/0x170) [ 0.760000] [<c02149f4>] (handle_IPI) from [<c020899c>] (gic_handle_irq+0x64/0x68) [ 0.760000] [<c020899c>] (gic_handle_irq) from [<c0212780>] (__irq_svc+0x40/0x54) [ 0.760000] Exception stack(0xea883f80 to 0xea883fc8) [ 0.760000] 3f80: ffffffed 00000000 ffffffed c021f740 c0d3849c c0d38500 00000000 00000000 [ 0.760000] 3fa0: ea882000 ea883fd0 c0939660 00000000 c0d39bd4 ea883fc8 c020f380 c020f384 [ 0.760000] 3fc0: 60000153 ffffffff [ 0.760000] [<c0212780>] (__irq_svc) from [<c020f384>] (arch_cpu_idle+0x38/0x3c) [ 0.760000] [<c020f384>] (arch_cpu_idle) from [<c0275e14>] (cpu_startup_entry+0x194/0x268) [ 0.760000] [<c0275e14>] (cpu_startup_entry) from [<90208ac4>] (0x90208ac4) [ 0.760000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.760000]
[PYBOOT] [capri 00:24]: got exception: panic ~$off
[PYBOOT] [capri 00:25]: Done.
========================================================================
Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.6 MiB/s done Bytes transferred = 5558712 (54d1b8 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x18000000 tmp/hummingboard-AxIYjZ/imx6dl-hummingboard.dtb tftp 0x18000000 tmp/hummingboard-AxIYjZ/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.158 Filename 'tmp/hummingboard-AxIYjZ/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *## 3.2 MiB/s done Bytes transferred = 27113 (69e9 hex) C1 U-Boot > bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [hummingboard 00:23]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x54d1b8 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 180099e8
Starting kernel ...
[PYBOOT] [hummingboard 00:23]: u-boot: started kernel.
[PYBOOT] [hummingboard 00:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 00:59]: got exception: timeout ~$off
[PYBOOT] [hummingboard 01:01]: Done.
========================================================================
Board hummingboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 3.7 MiB/s done Bytes transferred = 5714232 (573138 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x18000000 tmp/hummingboard-fimUZm/imx6dl-hummingboard.dtb tftp 0x18000000 tmp/hummingboard-fimUZm/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.158 Filename 'tmp/hummingboard-fimUZm/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *## 3.7 MiB/s done Bytes transferred = 27113 (69e9 hex) C1 U-Boot > bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [hummingboard 00:18]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x573138 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 180099e8
Starting kernel [PYBOOT] [hummingboard 00:19]: u-boot: started kernel. ...
[PYBOOT] [hummingboard 00:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 00:55]: got exception: timeout ~$off
[PYBOOT] [hummingboard 00:56]: Done.
========================================================================
Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------
Connected to minnowmax console [channel connected] (~$quit to exit)~$open
~$hardreset
~$open Command(minnowmax console)> open console already open
Command(minnowmax console)> hardreset (user:build) Reset target node minnowmax status: off
[PYBOOT] [minnowmax 00:36]: Timed out waiting for "<type 'str'>":
[PYBOOT] [minnowmax 00:37]: got exception: timeout ~$off
[PYBOOT] [minnowmax 00:38]: Done.
========================================================================
Board pandaes-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.091278] Registering SWP/SWPB emulation handler [ 2.101257] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.121337] twl 0-0048: PIH (irq 340) nested IRQs [ 2.127655] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.135253] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.144256] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.168853] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.176177] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.182281] hub 1-1:1.0: USB hub found [ 2.186676] hub 1-1:1.0: 5 ports detected [ 2.187499] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.191772] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.238311] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.247344] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.321044] hub 1-1:1.0: hub_port_status failed (err = -32) [ 2.337615] hub 1-1:1.0: hub_port_status failed (err = -32) [ 2.350280] hub 1-1:1.0: hub_port_status failed (err = -32) [ 2.356201] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.373321] VUSB: disabling [ 2.376739] VANA: disabling [ 2.379791] hub 1-1:1.0: hub_port_status failed (err = -32) [ 2.386047] VDAC: disabling [ 2.389892] hub 1-1:1.0: hub_port_status failed (err = -32) [ 2.396820] ALSA device list: [ 2.399658] mmc0: unrecognised SCR structure version 12 [ 2.399658] mmc0: error -22 whilst initialising SD card [ 2.410919] No soundcards found. [ 2.415130] Waiting for root device /dev/mmcblk0p2... [ 2.422393] hub 1-1:1.0: hub_port_status failed (err = -32) [ 2.426177] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.436492] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.437744] mmc1: new SDIO card at address 0001 [ 2.481140] hub 1-1:1.0: hub_port_status failed (err = -32)
[PYBOOT] [pandaes 03:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 03:01]: got exception: timeout ~$off
[PYBOOT] [pandaes 03:02]: Done.
========================================================================
Board pandaes-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.346984] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.355407] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.363800] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.372192] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.380615] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.387817] omap2_set_init_voltage: unable to set vdd_mpu [ 2.393493] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.400817] omap2_set_init_voltage: unable to set vdd_core [ 2.406585] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.413787] omap2_set_init_voltage: unable to set vdd_iva [ 2.422180] Power Management for TI OMAP4+ devices. [ 2.427276] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.434661] ThumbEE CPU extension supported. [ 2.440460] Registering SWP/SWPB emulation handler [ 2.440460] SmartReflex Class3 initialized [ 2.456848] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.474578] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.499786] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.509765] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.517730] twl 0-0048: PIH (irq 338) nested IRQs [ 2.524993] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.532836] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.543731] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.579681] twl6040 0-004b: clk32k is not handled [ 2.587066] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.600830] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.609222] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.617279] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.624969] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.629577] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.641082] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.700164] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.709808] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]'
[PYBOOT] [pandaes 02:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:19]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:21]: Done.
========================================================================
Board socfpga-arm-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 2.3 MiB/s done Bytes transferred = 5714232 (573138 hex) SOCFPGA_CYCLONE5 # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 SOCFPGA_CYCLONE5 # tftp 0x3000000 tmp/socfpga-nAVfEj/socfpga_cyclone5_socdk.dtb tftp 0x3000000 tmp/socfpga-nAVfEj/socfpga_cyclone5_socdk.dtb Using mii0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'tmp/socfpga-nAVfEj/socfpga_cyclone5_socdk.dtb'. Load address: 0x3000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15361 (3c01 hex) SOCFPGA_CYCLONE5 # bootz 0x1000000 - 0x3000000 ; bootm 0x1000000 - 0x3000000
[PYBOOT] [socfpga 00:28]: u-boot: jumping to kernel image bootz 0x1000000 - 0x3000000 ; bootm 0x1000000 - 0x3000000 ## Flattened Device Tree blob at 03000000 Booting using the fdt blob at 0x03000000 reserving fdt memory region: addr=0 size=1000 Loading Device Tree to 03ff9000, end 03fffc00 ... OK
Starting kernel ...
[PYBOOT] [socfpga 00:28]: u-boot: started kernel.
[PYBOOT] [socfpga 01:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [socfpga 01:04]: got exception: timeout ~$off
[PYBOOT] [socfpga 01:05]: Done.
========================================================================
Board trimslice-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.527599] sdhci-tegra c8000600.sdhci: No vmmc regulator found [ 1.533524] sdhci-tegra c8000600.sdhci: No vqmmc regulator found [ 1.539522] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.575262] mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA [ 1.583328] ledtrig-cpu: registered to indicate activity on CPUs [ 1.589498] usbcore: registered new interface driver usbhid [ 1.595062] usbhid: USB HID core driver [ 1.600926] usbcore: registered new interface driver snd-usb-audio [ 1.610483] tlv320aic23-codec 2-001a: Control not supported for path LLINEIN -> [NULL] -> Line Input [ 1.619610] tlv320aic23-codec 2-001a: ASoC: no dapm match for LLINEIN --> NULL --> Line Input [ 1.628128] tlv320aic23-codec 2-001a: ASoC: Failed to add route LLINEIN -> NULL -> Line Input [ 1.636649] tlv320aic23-codec 2-001a: Control not supported for path RLINEIN -> [NULL] -> Line Input [ 1.645776] tlv320aic23-codec 2-001a: ASoC: no dapm match for RLINEIN --> NULL --> Line Input [ 1.654291] tlv320aic23-codec 2-001a: ASoC: Failed to add route RLINEIN -> NULL -> Line Input [ 1.662812] tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input [ 1.671674] tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input [ 1.679929] tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input [ 1.688721] tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok [ 1.697965] TCP: cubic registered [ 1.701311] NET: Registered protocol family 17 [ 1.705773] can: controller area network core (rev 20120528 abi 9) [ 1.711999] NET: Registered protocol family 29 [ 1.716453] can: raw protocol (rev 20120528) [ 1.720726] can: broadcast manager protocol (rev 20120528 t) [ 1.726391] can: netlink gateway (rev 20130117) max_hops=1 [ 1.732158] Key type dns_resolver registered [ 1.736663] ThumbEE CPU extension supported. [ 1.740949] Registering SWP/SWPB emulation handler [ 1.750735] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 1.757698] rtc-em3027 2-0056: setting system clock to 2014-12-04 06:01:54 UTC (1417672914) [ 1.770259] ALSA device list: [ 1.773223] #0: tegra-trimslice [ 1.777135] Waiting for root device /dev/sda1...
[PYBOOT] [trimslice 02:23]: Timed out waiting for "<type 'str'>":
[PYBOOT] [trimslice 02:24]: got exception: timeout ~$off
[PYBOOT] [trimslice 02:25]: Done.
========================================================================
Board trimslice-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.694099] tlv320aic23-codec 2-001a: Control not supported for path LLINEIN -> [NULL] -> Line Input [ 1.703242] tlv320aic23-codec 2-001a: ASoC: no dapm match for LLINEIN --> NULL --> Line Input [ 1.711769] tlv320aic23-codec 2-001a: ASoC: Failed to add route LLINEIN -> NULL -> Line Input [ 1.720296] tlv320aic23-codec 2-001a: Control not supported for path RLINEIN -> [NULL] -> Line Input [ 1.729428] tlv320aic23-codec 2-001a: ASoC: no dapm match for RLINEIN --> NULL --> Line Input [ 1.737943] tlv320aic23-codec 2-001a: ASoC: Failed to add route RLINEIN -> NULL -> Line Input [ 1.746467] tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input [ 1.755329] tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input [ 1.763584] tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input [ 1.772861] tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok [ 1.785137] TCP: cubic registered [ 1.788703] NET: Registered protocol family 10 [ 1.794771] mip6: Mobile IPv6 [ 1.797735] sit: IPv6 over IPv4 tunneling driver [ 1.805477] NET: Registered protocol family 17 [ 1.809971] NET: Registered protocol family 15 [ 1.814406] can: controller area network core (rev 20120528 abi 9) [ 1.820763] NET: Registered protocol family 29 [ 1.825202] can: raw protocol (rev 20120528) [ 1.829505] can: broadcast manager protocol (rev 20120528 t) [ 1.835169] can: netlink gateway (rev 20130117) max_hops=1 [ 1.840810] Bluetooth: RFCOMM socket layer initialized [ 1.845953] Bluetooth: RFCOMM ver 1.11 [ 1.849782] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.855097] Bluetooth: BNEP socket layer initialized [ 1.860065] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.865984] Bluetooth: HIDP socket layer initialized [ 1.871807] Registering SWP/SWPB emulation handler [ 1.880446] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 1.887739] rtc-em3027 2-0056: setting system clock to 2014-12-04 06:00:15 UTC (1417672815) [ 1.904426] ALSA device list: [ 1.907388] #0: tegra-trimslice [ 1.911239] Waiting for root device /dev/sda1...
[PYBOOT] [trimslice 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [trimslice 01:46]: got exception: timeout ~$off
[PYBOOT] [trimslice 01:47]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 6 MiB/s done Bytes transferred = 5558712 (54d1b8 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x18000000 tmp/wandboard-Mfd0hs/imx6q-wandboard.dtb tftp 0x18000000 tmp/wandboard-Mfd0hs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'tmp/wandboard-Mfd0hs/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 1.4 MiB/s done Bytes transferred = 30254 (762e hex) => bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [wandboard 00:19]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x54d1b8 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a62d
Starting kernel ...
[PYBOOT] [wandboard 00:19]: u-boot: started kernel.
[PYBOOT] [wandboard 00:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 00:55]: got exception: timeout ~$off
[PYBOOT] [wandboard 00:56]: Done.
========================================================================
Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 6 MiB/s done Bytes transferred = 5714232 (573138 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x18000000 tmp/wandboard-qPwWBv/imx6q-wandboard.dtb tftp 0x18000000 tmp/wandboard-qPwWBv/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'tmp/wandboard-qPwWBv/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 5.8 MiB/s done Bytes transferred = 30254 (762e hex) => bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [wandboard 00:20]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x573138 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a62d
Starting kernel . [PYBOOT] [wandboard 00:20]: u-boot: started kernel. ..
[PYBOOT] [wandboard 00:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 00:57]: got exception: timeout ~$off
[PYBOOT] [wandboard 00:58]: Done.