Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160426/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 16:43.04 bbb arm-omap2plus_defconfig : FAILED 1:54.21 bbb arm-multi_v7_defconfig : FAILED 1:54.90 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:11.24 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:47.11 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.94 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:46.59 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:00.49 beaver arm-tegra_defconfig : FAILED 1:47.85 beaver arm-multi_v7_defconfig : FAILED 1:47.95 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:49.68 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.18 cosmic arm-imx_v6_v7_defconfig : FAILED 2:02.98 cosmic arm-multi_v7_defconfig : FAILED 2:05.75 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:15.25 dalmore arm-tegra_defconfig : FAILED 3:02.85 dalmore arm-multi_v7_defconfig : FAILED 1:54.39 dalmore arm-multi_lpae_defconfig : FAILED 2:01.34 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:52.88 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.48 omap5uevm arm-omap2plus_defconfig : FAILED 2:06.50 omap5uevm arm-multi_v7_defconfig : FAILED 2:07.04 omap5uevm arm-multi_lpae_defconfig : FAILED 2:11.87 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:10.08 seaboard arm-tegra_defconfig : FAILED 1:53.68 seaboard arm-multi_v7_defconfig : FAILED 1:55.49 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:56.46 snow arm-multi_v7_nosmp_defconfig : FAILED 0:48.73 snowball arm-u8500_defconfig : FAILED 2:00.70 snowball arm-multi_v7_defconfig : FAILED 2:16.72 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:58.45 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.44
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:08.09 arndale arm-exynos_defconfig : passed 1:26.64 arndale arm-multi_v7_defconfig : passed 1:18.68 arndale arm-multi_lpae_defconfig : passed 1:30.39 capri arm-bcm_defconfig : passed 0:46.53 capri arm-multi_v7_defconfig : passed 1:01.09 capri arm-multi_v7_nosmp_defconfig : warnings 0:58.04 chitra powerpc-pasemi_defconfig : passed 1:49.66 chitra powerpc-ppc64_defconfig : passed 2:05.97 colombus arm-sunxi_defconfig : passed 2:30.80 colombus arm-multi_v7_defconfig : passed 2:43.64 colombus arm-multi_lpae_defconfig : passed 2:32.14 cubie arm-sunxi_defconfig : passed 0:53.53 cubie arm-multi_v7_defconfig : passed 0:50.58 cubie arm-multi_v7_nosmp_defconfig : passed 0:54.29 cubie2 arm-sunxi_defconfig : passed 0:51.31 cubie2 arm-multi_v7_defconfig : passed 0:56.99 cubie2 arm-multi_lpae_defconfig : passed 0:49.56 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:53.12 cubox arm-multi_v7_defconfig : passed 1:12.24 cubox arm-mvebu_v7_defconfig : passed 1:12.88 cubox arm-multi_v7_nosmp_defconfig : passed 1:13.26 hummingboard arm-imx_v6_v7_defconfig : passed 1:30.71 hummingboard arm-multi_v7_defconfig : passed 1:37.80 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:06.93 jetsontk1 arm-tegra_defconfig : warnings 0:49.34 jetsontk1 arm-multi_v7_defconfig : warnings 1:36.71 jetsontk1 arm-multi_lpae_defconfig : warnings 1:33.90 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:31.94 pandaes arm-omap2plus_defconfig : warnings 1:36.40 pandaes arm-multi_v7_defconfig : passed 2:00.85 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:54.27 pi arm-exynos_defconfig : passed 2:12.63 pi arm-multi_v7_defconfig : passed 2:13.85 pi arm-multi_lpae_defconfig : passed 2:23.15 pi arm-multi_v7_nosmp_defconfig : warnings 2:11.88 pit arm-exynos_defconfig : passed 2:12.97 pit arm-multi_v7_defconfig : passed 2:16.88 pit arm-multi_lpae_defconfig : passed 2:37.91 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.17 seattle arm64-defconfig : passed 2:25.98 snow arm-exynos_defconfig : passed 2:03.33 snow arm-multi_v7_defconfig : passed 2:45.76 snow arm-multi_lpae_defconfig : passed 1:59.90 trimslice arm-tegra_defconfig : warnings 2:39.63 trimslice arm-multi_v7_defconfig : warnings 1:51.12 wandboard arm-multi_v7_defconfig : passed 1:11.81 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:21.75
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.14 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:18.06 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:23.03 parallella arm-multi_v7_defconfig : OFFLINE 2:26.87 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.49 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:43.04 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:53.13 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:52.73 sama5 arm-sama5_defconfig : OFFLINE 2:17.66 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:25.09 socfpga arm-socfpga_defconfig : OFFLINE 2:19.66 socfpga arm-multi_v7_defconfig : OFFLINE 2:32.34 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.82 trimslice arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.23
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
cma: Reserved 64 MiB at 0xbc000000 Memory policy: Data cache writeback Samsung CPU ID: 0x43520010 On node 0 totalpages: 520192 free_area_init_node: node 0, pgdat c10fc318, node_mem_map eeff8000 DMA zone: 1536 pages used for memmap DMA zone: 0 pages reserved DMA zone: 192512 pages, LIFO batch:31 HighMem zone: 327680 pages, LIFO batch:31 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 DT /cpu 2 nodes greater than max cores 1, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc5-next-20160426 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c030e930>] (unwind_backtrace) from [<c030b49c>] (show_stack+0x10/0x14) [<c030b49c>] (show_stack) from [<c0335ec4>] (__warn+0xe4/0xfc) [<c0335ec4>] (__warn) from [<c0335f14>] (warn_slowpath_fmt+0x38/0x48) [<c0335f14>] (warn_slowpath_fmt) from [<c0f04138>] (arm_dt_init_cpu_maps+0xd4/0x130) [<c0f04138>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x978) [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x374) [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) ---[ end trace cb88537fdc8fa200 ]--- CPU: All CPU(s) started in HYP mode. CPU: Virtualization extensions available. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518656 Kernel command line: console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1983248K/2080768K available (8458K kernel code, 1016K rwdata, 3632K rodata, 1024K init, 304K bss, 31984K reserved, 65536K cma-reserved, 1245184K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[PYBOOT] [arndale 16:37]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 16:38]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.564732] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.630975] Synopsys Designware Multimedia Card Interface Driver [ 1.638782] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.648638] ledtrig-cpu: registered to indicate activity on CPUs [ 1.655888] usbcore: registered new interface driver usbhid [ 1.661812] usbhid: USB HID core driver [ 1.673678] NET: Registered protocol family 10 [ 1.680208] sit: IPv6 over IPv4 tunneling driver [ 1.686340] NET: Registered protocol family 17 [ 1.691105] can: controller area network core (rev 20120528 abi 9) [ 1.697739] NET: Registered protocol family 29 [ 1.702450] can: raw protocol (rev 20120528) [ 1.706959] can: broadcast manager protocol (rev 20120528 t) [ 1.712944] can: netlink gateway (rev 20130117) max_hops=1 [ 1.719707] Key type dns_resolver registered [ 1.724519] omap_voltage_late_init: Voltage driver support not added [ 1.731499] ThumbEE CPU extension supported. [ 1.736053] Registering SWP/SWPB emulation handler [ 1.781117] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.787672] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.795407] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.804140] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812085] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819986] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827811] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.835168] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.842249] hctosys: unable to open rtc device (rtc0) [ 1.855680] Waiting for root device /dev/mmcblk0p2... [ 1.861445] mmc1: new high speed MMC card at address 0001 [ 1.868213] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.873489] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.880135] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.888736] mmcblk1: p1 p2
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2
[PYBOOT] [bbb 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:09]: got exception: timeout ~$off
[PYBOOT] [bbb 02:10]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.068673] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.074804] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.081142] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.088032] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.097643] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.107155] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.114184] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.157323] ledtrig-cpu: registered to indicate activity on CPUs [ 2.166046] oprofile: using arm/armv7 [ 2.171061] Initializing XFRM netlink socket [ 2.176206] NET: Registered protocol family 10 [ 2.186938] sit: IPv6 over IPv4 tunneling driver [ 2.195789] NET: Registered protocol family 17 [ 2.200730] NET: Registered protocol family 15 [ 2.205971] Key type dns_resolver registered [ 2.210833] omap_voltage_late_init: Voltage driver support not added [ 2.217582] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.226063] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.235691] ThumbEE CPU extension supported. [ 2.240332] Registering SWP/SWPB emulation handler [ 2.245363] SmartReflex Class3 initialized [ 2.318935] mmc1: new high speed MMC card at address 0001 [ 2.329236] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.336726] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.346455] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.359014] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.365518] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.373791] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.384532] hctosys: unable to open rtc device (rtc0) [ 2.389981] sr_init: No PMIC hook to init smartreflex [ 2.395662] sr_init: platform driver register failed for SR [ 2.440606] mmcblk1: p1 p2 [ 2.458910] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.370487] [<c0783138>] (driver_probe_device) from [<c0781540>] (bus_for_each_drv+0x64/0x98) [ 2.379414] [<c0781540>] (bus_for_each_drv) from [<c0782e48>] (__device_attach+0xb0/0x110) [ 2.388075] [<c0782e48>] (__device_attach) from [<c0782484>] (bus_probe_device+0x84/0x8c) [ 2.396640] [<c0782484>] (bus_probe_device) from [<c0780840>] (device_add+0x3e4/0x56c) [ 2.404933] [<c0780840>] (device_add) from [<c097e3dc>] (i2c_new_device+0x148/0x190) [ 2.413045] [<c097e3dc>] (i2c_new_device) from [<c097e82c>] (of_i2c_register_device+0x118/0x1b4) [ 2.422250] [<c097e82c>] (of_i2c_register_device) from [<c097eb54>] (i2c_register_adapter+0x198/0x34c) [ 2.432004] [<c097eb54>] (i2c_register_adapter) from [<c098843c>] (omap_i2c_probe+0x50c/0x6b0) [ 2.441031] [<c098843c>] (omap_i2c_probe) from [<c0784a18>] (platform_drv_probe+0x4c/0xb0) [ 2.449692] [<c0784a18>] (platform_drv_probe) from [<c0783138>] (driver_probe_device+0x214/0x2c0) [ 2.458980] [<c0783138>] (driver_probe_device) from [<c0781540>] (bus_for_each_drv+0x64/0x98) [ 2.467912] [<c0781540>] (bus_for_each_drv) from [<c0782e48>] (__device_attach+0xb0/0x110) [ 2.476567] [<c0782e48>] (__device_attach) from [<c0782484>] (bus_probe_device+0x84/0x8c) [ 2.485135] [<c0782484>] (bus_probe_device) from [<c0782914>] (deferred_probe_work_func+0x68/0x98) [ 2.494521] [<c0782914>] (deferred_probe_work_func) from [<c0357638>] (process_one_work+0x138/0x348) [ 2.504092] [<c0357638>] (process_one_work) from [<c0357880>] (worker_thread+0x38/0x510) [ 2.512576] [<c0357880>] (worker_thread) from [<c035cb28>] (kthread+0xdc/0xf4) [ 2.520142] [<c035cb28>] (kthread) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.527742] ---[ end trace 80517a48d2ec637e ]--- [ 2.532781] palmas-pmic: probe of 48070000.i2c:tps659038@58:tps659038_pmic failed with error -22 [ 2.546503] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.561223] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.568298] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.595387] rtc-ds1307 2-006f: SET TIME! [ 2.601133] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.607872] rtc-ds1307 2-006f: 64 bytes nvram [ 2.612486] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.622374] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.655651] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.673411] vdd_3v3: disabling [ 2.676628] aic_dvdd_fixed: disabling [ 2.680471] pbias_mmc_omap5: disabling [ 2.685241] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.375092] [<c0783138>] (driver_probe_device) from [<c0781540>] (bus_for_each_drv+0x64/0x98) [ 2.384024] [<c0781540>] (bus_for_each_drv) from [<c0782e48>] (__device_attach+0xb0/0x110) [ 2.392679] [<c0782e48>] (__device_attach) from [<c0782484>] (bus_probe_device+0x84/0x8c) [ 2.401244] [<c0782484>] (bus_probe_device) from [<c0780840>] (device_add+0x3e4/0x56c) [ 2.409543] [<c0780840>] (device_add) from [<c097e3dc>] (i2c_new_device+0x148/0x190) [ 2.417655] [<c097e3dc>] (i2c_new_device) from [<c097e82c>] (of_i2c_register_device+0x118/0x1b4) [ 2.426863] [<c097e82c>] (of_i2c_register_device) from [<c097eb54>] (i2c_register_adapter+0x198/0x34c) [ 2.436618] [<c097eb54>] (i2c_register_adapter) from [<c098843c>] (omap_i2c_probe+0x50c/0x6b0) [ 2.445640] [<c098843c>] (omap_i2c_probe) from [<c0784a18>] (platform_drv_probe+0x4c/0xb0) [ 2.454310] [<c0784a18>] (platform_drv_probe) from [<c0783138>] (driver_probe_device+0x214/0x2c0) [ 2.463607] [<c0783138>] (driver_probe_device) from [<c0781540>] (bus_for_each_drv+0x64/0x98) [ 2.472539] [<c0781540>] (bus_for_each_drv) from [<c0782e48>] (__device_attach+0xb0/0x110) [ 2.481201] [<c0782e48>] (__device_attach) from [<c0782484>] (bus_probe_device+0x84/0x8c) [ 2.489773] [<c0782484>] (bus_probe_device) from [<c0782914>] (deferred_probe_work_func+0x68/0x98) [ 2.499159] [<c0782914>] (deferred_probe_work_func) from [<c0357638>] (process_one_work+0x138/0x348) [ 2.508730] [<c0357638>] (process_one_work) from [<c0357880>] (worker_thread+0x38/0x510) [ 2.517210] [<c0357880>] (worker_thread) from [<c035cb28>] (kthread+0xdc/0xf4) [ 2.524778] [<c035cb28>] (kthread) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.532373] ---[ end trace bf3151ec87cf9e2f ]--- [ 2.537417] palmas-pmic: probe of 48070000.i2c:tps659038@58:tps659038_pmic failed with error -22 [ 2.551210] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.565959] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.573032] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.600111] rtc-ds1307 2-006f: SET TIME! [ 2.605874] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.612623] rtc-ds1307 2-006f: 64 bytes nvram [ 2.617229] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.627102] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.660369] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.678137] vdd_3v3: disabling [ 2.681349] aic_dvdd_fixed: disabling [ 2.685196] pbias_mmc_omap5: disabling [ 2.689966] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[<c070102c>] (driver_probe_device) from [<c06ff574>] (bus_for_each_drv+0x64/0x98) [<c06ff574>] (bus_for_each_drv) from [<c0700d3c>] (__device_attach+0xb0/0x110) [<c0700d3c>] (__device_attach) from [<c0700378>] (bus_probe_device+0x84/0x8c) [<c0700378>] (bus_probe_device) from [<c06fe794>] (device_add+0x3e4/0x56c) [<c06fe794>] (device_add) from [<c08bdf20>] (i2c_new_device+0x148/0x190) [<c08bdf20>] (i2c_new_device) from [<c08be600>] (i2c_register_adapter+0x3a8/0x4c8) [<c08be600>] (i2c_register_adapter) from [<c08c786c>] (omap_i2c_probe+0x50c/0x6b0) [<c08c786c>] (omap_i2c_probe) from [<c07028c4>] (platform_drv_probe+0x4c/0xb0) [<c07028c4>] (platform_drv_probe) from [<c070102c>] (driver_probe_device+0x214/0x2c0) [<c070102c>] (driver_probe_device) from [<c06ff574>] (bus_for_each_drv+0x64/0x98) [<c06ff574>] (bus_for_each_drv) from [<c0700d3c>] (__device_attach+0xb0/0x110) [<c0700d3c>] (__device_attach) from [<c0700378>] (bus_probe_device+0x84/0x8c) [<c0700378>] (bus_probe_device) from [<c0700808>] (deferred_probe_work_func+0x68/0x98) [<c0700808>] (deferred_probe_work_func) from [<c0348698>] (process_one_work+0xfc/0x31c) [<c0348698>] (process_one_work) from [<c0348904>] (worker_thread+0x4c/0x4d8) [<c0348904>] (worker_thread) from [<c034d67c>] (kthread+0xd4/0xec) [<c034d67c>] (kthread) from [<c0307b98>] (ret_from_fork+0x14/0x3c) ---[ end trace cb88537fdc8fa205 ]--- palmas-pmic: probe of 48070000.i2c:tps659038@58:tps659038_pmic failed with error -22 palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz omap_hsmmc 4809c000.mmc: Got CD GPIO omap_hwmod: gpio6: _wait_target_disable failed rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) vdd_3v3: disabling aic_dvdd_fixed: disabling pbias_mmc_omap5: disabling Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:58]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:59]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.637019] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip8 (48070000.i2c:tps659038@58:tps659038_gpio) [ 4.650182] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.657956] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 4.664299] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.670630] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.677522] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.687916] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.692763] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.699081] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.705937] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.715529] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.725025] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.732089] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.767768] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.774066] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.780945] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.790543] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.800043] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.807082] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.813199] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.819510] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.826363] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.835946] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.845440] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.852482] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.866067] omap_hwmod: gpio6: _wait_target_disable failed [ 4.898002] hctosys: unable to open rtc device (rtc0) [ 4.903305] sr_init: No PMIC hook to init smartreflex [ 4.908817] sr_init: platform driver register failed for SR [ 4.955121] vdd_3v3: disabling [ 4.958353] aic_dvdd_fixed: disabling [ 4.962227] pbias_mmc_omap5: disabling [ 4.968839] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.298116] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.305072] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.311592] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.318461] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.324044] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.331142] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.341140] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.352382] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.359018] [drm] No driver support for vblank timestamp query. [ 3.364962] drm drm: No connectors reported connected with modes [ 3.370972] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.397382] Console: switching to colour frame buffer device 128x48 [ 3.409386] drm drm: fb0: frame buffer device [ 3.428801] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.439581] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.446045] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.451456] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.459293] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.473809] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.481050] hub 1-0:1.0: USB hub found [ 3.484822] hub 1-0:1.0: 1 port detected [ 3.489750] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.495170] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.503337] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.518803] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.525965] hub 2-0:1.0: USB hub found [ 3.529739] hub 2-0:1.0: 1 port detected [ 3.540465] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.554096] vdd_sata,avdd_plle: disabling [ 3.558893] usb1_vbus: disabling [ 3.562974] Waiting for root device /dev/mmcblk0p1... [ 3.843808] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.795320] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:46]: got exception: timeout ~$off
[PYBOOT] [beaver 01:47]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:01:00.0: enabling device (0140 -> 0143) r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. drm drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Console: switching to colour frame buffer device 128x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci 7d004000.usb: EHCI Host Controller tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) vdd_sata,avdd_plle: disabling usb1_vbus: disabling Waiting for root device /dev/mmcblk0p1... usb 2-1: new high-speed USB device number 2 using tegra-ehci asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:48]: got exception: timeout ~$off
[PYBOOT] [beaver 01:49]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.086984] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 6.093941] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.099544] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.107075] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.117074] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.129969] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.136613] [drm] No driver support for vblank timestamp query. [ 6.142607] drm drm: No connectors reported connected with modes [ 6.148632] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.174270] Console: switching to colour frame buffer device 128x48 [ 6.186062] drm drm: fb0: frame buffer device [ 6.213573] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.222856] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.229332] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.234764] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.242740] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.263573] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.271274] hub 1-0:1.0: USB hub found [ 6.275069] hub 1-0:1.0: 1 port detected [ 6.279879] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.285323] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.293188] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.313568] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.321146] hub 2-0:1.0: USB hub found [ 6.324935] hub 2-0:1.0: 1 port detected [ 6.333225] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.351997] vdd_sata,avdd_plle: disabling [ 6.356499] usb1_vbus: disabling [ 6.359907] ALSA device list: [ 6.362864] #0: NVIDIA Tegra Beaver [ 6.367104] Waiting for root device /dev/mmcblk0p1... [ 6.643572] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.628847] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:46]: got exception: timeout ~$off
[PYBOOT] [beaver 01:47]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
eth0: device MAC address ba:d1:33:09:65:b7 RX IPC Checksum Offload disabled No MAC Management Counters available IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/ba:d1:33:09:65:b7 Sending on LPF/eth0/ba:d1:33:09:65:b7 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.461582] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.535817] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.546146] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.620366] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.630715] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.704990] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.715324] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.789567] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.799892] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.874065] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.884394] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.958627] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.968962] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.043162] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.053531] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.127768] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.138091] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.212250] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.222576] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.296802] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.307130] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.381350] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.391676] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.465898] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.476221] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.550438] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.560765] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.634991] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.645318] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.719547] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.729872] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.804034] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.814357] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:01]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:02]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.063517] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.137495] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.147576] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.221562] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.231645] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.305629] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.315731] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.389718] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.399801] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.473789] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.483877] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.557857] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.567933] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.641925] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.652001] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.725981] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.736068] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.810055] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.820130] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.894109] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.904181] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.978158] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.988231] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.062211] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.072292] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.146276] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.156352] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.230336] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.240412] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.314399] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.324481] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.398463] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.408548] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:03]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:04]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:12]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:13]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:14]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.839929] usb2_vbus: supplied by vdd-sys-5v0 [ 2.857555] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.869197] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.881204] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.897466] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.903088] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.909900] mmc1: new high speed MMC card at address 0001 [ 2.913981] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.917233] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.920449] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.922283] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.927155] mmcblk1: p1 [ 2.942559] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.958820] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.969400] hub 1-0:1.0: USB hub found [ 2.973578] hub 1-0:1.0: 1 port detected [ 2.983608] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.994743] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.007330] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.020920] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.027490] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.033507] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.082713] vdd_hdmi_5v0: disabling [ 3.095808] dvdd_ts: disabling [ 3.099068] usb1_vbus: disabling [ 3.102331] vdd_cam_1v8_reg: disabling [ 3.106167] VDD_5V0_HDMI_CON: disabling [ 3.113777] Waiting for root device /dev/mmcblk0p1... [ 3.288721] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.246809] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 4.262365] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 4.274387] tegra-dsi 54300000.dsi: cannot get VDD supply [ 78.403689] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.823536] usb1_vbus: supplied by vdd-sys-5v0 [ 2.832546] usb2_vbus: supplied by vdd-sys-5v0 [ 2.849697] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.860396] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.872111] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.888489] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.894134] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.902625] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.902927] mmc1: new high speed MMC card at address 0001 [ 2.905073] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.906141] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.909542] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.911749] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.916053] mmcblk1: p1 [ 2.946266] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.956982] hub 1-0:1.0: USB hub found [ 2.961042] hub 1-0:1.0: 1 port detected [ 2.971041] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.982890] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.995202] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.009135] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.015365] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.031628] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.056665] vdd_hdmi_5v0: disabling [ 3.070522] dvdd_ts: disabling [ 3.073759] usb1_vbus: disabling [ 3.077125] vdd_cam_1v8_reg: disabling [ 3.080943] VDD_5V0_HDMI_CON: disabling [ 3.088705] Waiting for root device /dev/mmcblk0p1... [ 3.271251] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.249757] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 4.265401] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 4.277368] tegra-dsi 54300000.dsi: cannot get VDD supply
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 tegra-hdmi 54280000.hdmi: failed to get PLL regulator tegra-dsi 54300000.dsi: cannot get VDD supply tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected tegra-hdmi 54280000.hdmi: failed to get PLL regulator tegra-dsi 54300000.dsi: cannot get VDD supply input: gpio-keys as /devices/soc0/gpio-keys/input/input0 tegra-hdmi 54280000.hdmi: failed to get PLL regulator tegra-dsi 54300000.dsi: cannot get VDD supply palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) vdd_hdmi_5v0: disabling mmc1: new high speed MMC card at address 0001 dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling VDD_5V0_HDMI_CON: disabling mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB mmcblk1: p1 tegra-hdmi 54280000.hdmi: failed to get PLL regulator tegra-dsi 54300000.dsi: cannot get VDD supply Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f tegra-hdmi 54280000.hdmi: failed to get PLL regulator tegra-dsi 54300000.dsi: cannot get VDD supply
[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.513620] Registering SWP/SWPB emulation handler [ 5.532608] usb1_vbus: supplied by vdd-sys-5v0 [ 5.540362] usb2_vbus: supplied by vdd-sys-5v0 [ 5.555278] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.562552] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 5.570578] tegra-dsi 54300000.dsi: cannot get VDD supply [ 5.579840] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.585670] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.594650] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.611962] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.626094] hub 1-0:1.0: USB hub found [ 5.630056] hub 1-0:1.0: 1 port detected [ 5.640384] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 5.648832] tegra-dsi 54300000.dsi: cannot get VDD supply [ 5.660611] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.673388] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 5.679817] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 5.682007] tegra-dsi 54300000.dsi: cannot get VDD supply [ 5.765434] vdd_hdmi_5v0: disabling [ 5.779114] dvdd_ts: disabling [ 5.782350] usb1_vbus: disabling [ 5.785621] vdd_cam_1v8_reg: disabling [ 5.789399] VDD_5V0_HDMI_CON: disabling [ 5.794128] ALSA device list: [ 5.797122] #0: NVIDIA Tegra Dalmore [ 5.803072] Waiting for root device /dev/mmcblk0p1... [ 5.951963] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 6.975119] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 6.988292] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 6.996662] tegra-dsi 54300000.dsi: cannot get VDD supply [ 7.006984] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 7.015323] tegra-dsi 54300000.dsi: cannot get VDD supply
[PYBOOT] [dalmore 02:59]: Timed out waiting for "<type 'str'>": [ 84.801922] random: nonblocking pool is initialized
[PYBOOT] [dalmore 03:00]: got exception: timeout ~$off
[PYBOOT] [dalmore 03:01]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.701032] sit: IPv6 over IPv4 tunneling driver [ 1.706311] NET: Registered protocol family 17 [ 1.709562] NET: Registered protocol family 15 [ 1.714039] Key type dns_resolver registered [ 1.718356] Registering SWP/SWPB emulation handler [ 1.726203] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.730919] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.738340] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.745484] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.752067] [drm] No driver support for vblank timestamp query. [ 1.757981] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.764321] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.769372] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.776802] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.783960] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.792764] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.802534] mmc1: new DDR MMC card at address 0001 [ 1.806756] max98090 1-0010: MAX98090 REVID=0x43 [ 1.809054] max98090 1-0010: use default 2.8v micbias [ 1.817688] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.821465] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.827596] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.829766] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.833496] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.846106] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.852759] mmcblk1: p1 p2 [ 1.866915] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.890924] VDD10_HDMI_1.0V: disabling [ 1.891658] vdd_g3d: disabling [ 1.892716] BUCK8_2.8V: disabling [ 1.896776] ALSA device list: [ 1.898314] #0: Odroid-U3 [ 1.902219] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:50]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.845779] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.851419] omap_vp_init: No PMIC info for vdd_mm [ 1.856341] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.862073] omap_vp_init: No PMIC info for vdd_mpu [ 1.867160] Power Management for TI OMAP4+ devices. [ 1.872384] ThumbEE CPU extension supported. [ 1.876877] Registering SWP/SWPB emulation handler [ 1.887007] palmas 0-0048: Irq flag is 0x00000000 [ 1.911346] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.922068] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.936857] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.946881] mmc0: new high speed MMC card at address 0001 [ 1.952891] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.957809] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.964178] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.964207] smps9: Bringing 0uV into 2100000-2100000uV [ 1.977032] smps10_out2: failed to get the current voltage(-22) [ 1.983258] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 1.995497] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.006359] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.011463] smsc95xx v1.0.4 [ 2.034334] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.040734] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.060410] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:06:24 UTC (946688784) [ 2.076121] pbias_mmc_omap5: disabling [ 2.080074] vmmcsdio_fixed: disabling [ 2.088729] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, d2:18:1a:8f:b6:d6 [ 2.101261] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.107210] Waiting for root device /dev/mmcblk1p2... [ 2.338574] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.474382] hub 1-2:1.0: USB hub found [ 2.478393] hub 1-2:1.0: 3 ports detected [ 2.484130] omap-dwc3 4a020000.omap_dwc3: vbus init failed
[PYBOOT] [omap5uevm 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:10]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:11]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.835616] omap_vp_init: No PMIC info for vdd_core [ 1.840723] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.846366] omap_vp_init: No PMIC info for vdd_mm [ 1.851282] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.857023] omap_vp_init: No PMIC info for vdd_mpu [ 1.862112] Power Management for TI OMAP4+ devices. [ 1.867332] ThumbEE CPU extension supported. [ 1.871815] Registering SWP/SWPB emulation handler [ 1.878860] palmas 0-0048: Irq flag is 0x00000000 [ 1.896445] smsc95xx v1.0.4 [ 1.906223] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.916823] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.931436] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.941657] mmc0: new high speed MMC card at address 0001 [ 1.947683] smps9: Bringing 0uV into 2100000-2100000uV [ 1.948110] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 92:25:4f:dd:fa:a3 [ 1.964787] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.969708] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.976063] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.984006] smps10_out2: failed to get the current voltage(-22) [ 1.990240] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.002484] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.013385] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.039345] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.045725] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.065381] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:03:58 UTC (946688638) [ 2.081094] pbias_mmc_omap5: disabling [ 2.085046] vmmcsdio_fixed: disabling [ 2.089651] Waiting for root device /dev/mmcblk1p2... [ 2.198565] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.334401] hub 1-2:1.0: USB hub found [ 2.338412] hub 1-2:1.0: 3 ports detected [ 2.344347] omap-dwc3 4a020000.omap_dwc3: vbus init failed
[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
omap_vc_init_channel: No PMIC info for vdd_mm omap_vp_init: No PMIC info for vdd_mm omap_vc_init_channel: No PMIC info for vdd_mpu omap_vp_init: No PMIC info for vdd_mpu Power Management for TI OMAP4+ devices. ThumbEE CPU extension supported. usb 1-3: new high-speed USB device number 2 using ehci-omap palmas 0-0048: Irq flag is 0x00000000 palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 smps6: Bringing 1350000uV into 1200000-1200000uV smps9: Bringing 0uV into 2100000-2100000uV smps10_out2: failed to get the current voltage(-22) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 mmc0: new high speed MMC card at address 0001 omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz mmcblk0: mmc0:0001 SEM04G 3.69 GiB mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz omap-dwc3 4a020000.omap_dwc3: vbus init failed palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:08:45 UTC (946688925) pbias_mmc_omap5: disabling vmmcsdio_fixed: disabling smsc95xx v1.0.4 smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, be:42:76:ca:56:64 omap-dwc3 4a020000.omap_dwc3: vbus init failed Waiting for root device /dev/mmcblk1p2... usb 1-2: new high-speed USB device number 3 using ehci-omap hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected omap-dwc3 4a020000.omap_dwc3: vbus init failed
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.833155] palmas 0-0048: Irq flag is 0x00000000 [ 3.862479] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 3.877639] smps6: Bringing 1350000uV into 1200000-1200000uV [ 3.891478] smps9: Bringing 0uV into 2100000-2100000uV [ 3.899084] smps10_out2: failed to get the current voltage(-22) [ 3.905299] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.921061] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 3.932644] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.940243] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.946790] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.953117] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.959996] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.969597] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.979093] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.986133] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.992281] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.998604] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.005450] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.015044] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.024541] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.031586] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.078321] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.084621] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.091490] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.101083] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.110577] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.117622] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.125484] hctosys: unable to open rtc device (rtc0) [ 4.130811] sr_init: No PMIC hook to init smartreflex [ 4.136301] sr_init: platform driver register failed for SR [ 4.164905] pbias_mmc_omap5: disabling [ 4.168877] vmmcsdio_fixed: disabling [ 4.174979] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.909509] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.920748] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.927440] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.932897] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.940719] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.956576] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.964363] hub 3-0:1.0: USB hub found [ 1.968168] hub 3-0:1.0: 1 port detected [ 1.976188] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.982820] [drm] No driver support for vblank timestamp query. [ 1.999848] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.013557] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.022072] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.038650] mmc2: switch to bus width 8 failed [ 2.038921] mmc2: switch to bus width 4 failed [ 2.038933] mmc2: new high speed MMC card at address 0001 [ 2.039392] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 2.039586] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 2.039775] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 2.040314] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.041033] mmcblk2: p3 [ 2.059144] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.062475] mmc0: new SDIO card at address 0001 [ 2.084367] Console: switching to colour frame buffer device 170x48 [ 2.158810] drm drm: fb0: frame buffer device [ 2.176581] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.183198] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.190171] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.203483] vdd_1v5: disabling [ 2.206535] vdd_1v2: disabling [ 2.759861] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.771237] Waiting for root device /dev/mmcblk0p3... [ 57.562571] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:53]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:54]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB mmcblk2: p3 mmc0: queuing unknown CIS tuple 0x80 (50 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (19 bytes) mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 Console: switching to colour frame buffer device 170x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) vdd_1v5: disabling vdd_1v2: disabling asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:54]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:56]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.434512] can: raw protocol (rev 20120528) [ 4.438779] can: broadcast manager protocol (rev 20120528 t) [ 4.444498] can: netlink gateway (rev 20130117) max_hops=1 [ 4.480023] Bluetooth: RFCOMM socket layer initialized [ 4.485190] Bluetooth: RFCOMM ver 1.11 [ 4.488957] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.494388] Bluetooth: BNEP socket layer initialized [ 4.499350] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.505323] Bluetooth: HIDP socket layer initialized [ 4.511029] Key type dns_resolver registered [ 4.516766] Registering SWP/SWPB emulation handler [ 4.533421] VDDIO_HDMI: supplied by vdd_5v0 [ 4.539477] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.551473] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.557949] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.563542] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.571853] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.589764] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.599535] hub 3-0:1.0: USB hub found [ 4.603426] hub 3-0:1.0: 1 port detected [ 4.617957] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.624644] [drm] No driver support for vblank timestamp query. [ 4.710682] Console: switching to colour frame buffer device 170x48 [ 4.738013] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.757094] drm drm: fb0: frame buffer device [ 4.789776] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.797857] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.805990] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.824741] vdd_1v5: disabling [ 4.827793] vdd_1v2: disabling [ 4.830960] ALSA device list: [ 4.833919] #0: NVIDIA Tegra Seaboard [ 4.838373] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:53]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
Linux snow 4.6.0-rc5-next-20160426 #1 Tue Apr 26 00:27:45 PDT 2016 armv7l
The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usUnable to handle kernel paging request at virtual address ee79ac40 pgd = c0204000 [ee79ac40] *pgd=6e60041e(bad) Internal error: Oops: 8000000d [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc5-next-20160426 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f30 ti: c1000000 task.ti: c1000000 PC is at 0xee79ac40 LR is at cpu_init+0x14/0x54 pc : [<ee79ac40>] lr : [<c0309fa0>] psr: 000001d3 sp : c1001f50 ip : 00000000 fp : 00000000 r10: c1035b18 r9 : c1005f30 r8 : 7356a765 r7 : 00000001 r6 : c10b40c0 r5 : ee79a8c0 r4 : c1136b84 r3 : c030d820 r2 : 00cf9974 r1 : 6e07c059 r0 : 00000000 Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 6e07c059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f50 to 0xc1002000) 1f40: c10fdf95 c034e090 00000000 c1035b18 1f60: c100615c c030c590 c1039780 72b3228e 00000001 c10fdf95 c10fdf95 c1000000 1f80: c100212c c10b3560 c1002134 c10fdf95 c1001fa4 c0a9596c ffffffff c1000000 1fa0: c1001fac c0a95b6c c10b4020 c0357edc 00000001 ffffffff 00000000 c0f00c44 1fc0: ffffffff ffffffff 00000000 c0f0068c 00000000 c0f8aa20 c11001d4 c10020b4 1fe0: c0f8aa1c c10070f8 40204059 410fc0f4 00000000 40208078 00000000 00000000 [<c0309fa0>] (cpu_init) from [<c034e090>] (atomic_notifier_call_chain+0x18/0x20) [<c034e090>] (atomic_notifier_call_chain) from [<c030c590>] (__switch_to+0x34/0x64) Code: 3d485441 7665642f 73656369 7269762f (ee79a540) ---[ end trace cb88537fdc8fa202 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 00:46]: got exception: panic ~$off
[PYBOOT] [snow 00:47]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.969696] can: controller area network core (rev 20120528 abi 9) [ 1.975982] NET: Registered protocol family 29 [ 1.980468] can: raw protocol (rev 20120528) [ 1.984771] can: broadcast manager protocol (rev 20120528 t) [ 1.990447] can: netlink gateway (rev 20130117) max_hops=1 [ 1.996795] Key type dns_resolver registered [ 2.001403] ThumbEE CPU extension supported. [ 2.005737] Registering SWP/SWPB emulation handler [ 2.018066] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.025238] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.034759] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.041839] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.048858] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.055877] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.073059] db8500-esram12: disabling [ 2.076873] db8500-esram34: disabling [ 2.081054] V-CSI/DSI: disabling [ 2.085449] mmci-reg: disabling [ 2.091461] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.097503] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.104156] Waiting for root device /dev/mmcblk0p4... [ 2.132476] mmc3: new high speed MMC card at address 0001 [ 2.138854] mmcblk3: mmc3:0001 3.53 GiB [ 2.143218] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.149017] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.154876] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.161804] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:14]: got exception: timeout ~$off
[PYBOOT] [snowball 02:15]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:56]: got exception: timeout ~$off
[PYBOOT] [snowball 01:57]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.728485] sit: IPv6 over IPv4 tunneling driver [ 2.734680] NET: Registered protocol family 17 [ 2.739196] NET: Registered protocol family 35 [ 2.743988] NET: Registered protocol family 37 [ 2.748626] Registering SWP/SWPB emulation handler [ 2.772125] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.779815] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-07 04:35:38 UTC (955082138) [ 2.789520] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.796752] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.803924] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.810974] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.828887] db8500-esram12: disabling [ 2.832916] db8500-esram34: disabling [ 2.836975] V-CSI/DSI: disabling [ 2.840332] mmci-reg: disabling [ 2.843719] ALSA device list: [ 2.846679] #0: MOP500-card [ 2.850158] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.856231] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.862731] Waiting for root device /dev/mmcblk0p4... [ 2.950317] mmc3: new high speed MMC card at address 0001 [ 2.970642] mmcblk3: mmc3:0001 3.53 GiB [ 3.000366] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.020629] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.050323] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.070343] mmcblk3: p1 p2 p3 p4 [ 65.340545] random: nonblocking pool is initialized Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:58]: got exception: timeout ~$off
[PYBOOT] [snowball 01:59]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.192878] mmcblk0: error -110 sending status command, retrying [ 20.201336] mmcblk0: error -110 sending status command, aborting [ 20.212407] mmcblk0: error -110 sending status command, retrying [ 20.220876] mmcblk0: error -110 sending status command, retrying [ 20.229348] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: cannot execute "/sbin/getty"INIT: cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutes
[ 20.282290] mmcblk0: error -110 sending status command, retrying [ 20.290789] mmcblk0: error -110 sending status command, retrying [ 20.299244] mmcblk0: error -110 sending status command, aborting [ 20.310427] mmcblk0: error -110 sending status command, retrying [ 20.318903] mmcblk0: error -110 sending status command, retrying [ 20.327360] mmcblk0: error -110 sending status command, aborting [ 20.338399] mmcblk0: error -110 sending status command, retrying [ 20.346855] mmcblk0: error -110 sending status command, retrying [ 20.355283] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.366706] mmcblk0: error -110 sending status command, retrying y" INIT: Id "5" respawning too[ 20.375234] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.384103] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.424846] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.