mainline boot: 51 passed 25 failed (mainline/v4.6-rc3-184-g9d090d0)

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc3-184-g9d090d0/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 23:48.13 bbb arm-omap2plus_defconfig : FAILED 1:54.22 bbb arm-multi_v7_defconfig : FAILED 2:02.50 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:00.23 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.19 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.81 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:50.96 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:02.27 beaver arm-tegra_defconfig : FAILED 1:44.53 beaver arm-multi_v7_defconfig : FAILED 1:58.20 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:52.63 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.93 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.72 cosmic arm-multi_v7_defconfig : FAILED 2:12.24 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:11.14 dalmore arm-tegra_defconfig : FAILED 1:48.41 dalmore arm-multi_v7_defconfig : FAILED 2:06.77 dalmore arm-multi_lpae_defconfig : FAILED 1:58.81 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:53.84 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:53.33 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.03 snowball arm-u8500_defconfig : FAILED 1:58.45 snowball arm-multi_v7_defconfig : FAILED 2:04.85 snowball arm-multi_v7_nosmp_defconfig : FAILED 3:13.67 wandboard arm-imx_v6_v7_defconfig : FAILED 2:57.89

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:10.79 arndale arm-exynos_defconfig : passed 1:31.04 arndale arm-multi_v7_defconfig : passed 1:19.04 arndale arm-multi_lpae_defconfig : passed 1:25.23 capri arm-bcm_defconfig : passed 0:56.65 capri arm-multi_v7_defconfig : passed 0:53.64 capri arm-multi_v7_nosmp_defconfig : warnings 0:47.56 chitra powerpc-pasemi_defconfig : passed 2:01.21 chitra powerpc-ppc64_defconfig : passed 3:03.69 colombus arm-sunxi_defconfig : passed 2:50.17 colombus arm-multi_v7_defconfig : passed 2:37.86 colombus arm-multi_lpae_defconfig : passed 2:28.40 cubie arm-sunxi_defconfig : passed 0:49.39 cubie arm-multi_v7_defconfig : passed 0:50.02 cubie arm-multi_v7_nosmp_defconfig : passed 1:07.81 cubie2 arm-sunxi_defconfig : passed 0:57.91 cubie2 arm-multi_v7_defconfig : passed 0:54.41 cubie2 arm-multi_lpae_defconfig : passed 0:55.29 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:55.41 cubox arm-multi_v7_defconfig : passed 1:14.19 cubox arm-mvebu_v7_defconfig : passed 1:09.96 cubox arm-multi_v7_nosmp_defconfig : passed 1:21.02 hummingboard arm-imx_v6_v7_defconfig : passed 1:29.36 hummingboard arm-multi_v7_defconfig : passed 1:29.02 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:11.73 jetsontk1 arm-tegra_defconfig : passed 1:38.69 jetsontk1 arm-multi_v7_defconfig : passed 1:38.74 jetsontk1 arm-multi_lpae_defconfig : passed 1:52.94 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:38.89 pandaes arm-omap2plus_defconfig : warnings 1:40.81 pandaes arm-multi_v7_defconfig : passed 1:46.14 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:01.24 pi arm-exynos_defconfig : passed 2:10.39 pi arm-multi_v7_defconfig : passed 2:27.95 pi arm-multi_lpae_defconfig : passed 2:34.45 pi arm-multi_v7_nosmp_defconfig : warnings 2:06.29 pit arm-exynos_defconfig : passed 2:12.45 pit arm-multi_v7_defconfig : passed 2:13.34 pit arm-multi_lpae_defconfig : passed 2:13.75 pit arm-multi_v7_nosmp_defconfig : warnings 2:15.46 seattle arm64-defconfig : warnings 2:20.99 snow arm-exynos_defconfig : passed 2:10.52 snow arm-multi_v7_defconfig : passed 2:16.63 snow arm-multi_lpae_defconfig : passed 1:59.54 socfpga arm-socfpga_defconfig : passed 1:07.92 socfpga arm-multi_v7_defconfig : passed 1:25.06 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:41.68 trimslice arm-tegra_defconfig : passed 1:32.81 trimslice arm-multi_v7_defconfig : passed 1:43.79 wandboard arm-multi_v7_defconfig : passed 1:10.46 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:13.80

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.85 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:15.92 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:19.74 omap5uevm arm-omap2plus_defconfig : OFFLINE 1:18.01 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:20.64 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:36.98 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:20.12 parallella arm-multi_v7_defconfig : OFFLINE 2:22.34 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:22.31 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:51.11 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.66 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 1:04.33 sama5 arm-sama5_defconfig : OFFLINE 2:15.29 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:27.59 seaboard arm-tegra_defconfig : OFFLINE 2:21.71 seaboard arm-multi_v7_defconfig : OFFLINE 2:36.45 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:21.30 trimslice arm-multi_v7_nosmp_defconfig : OFFLINE 2:42.86

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.593526] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.600126] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.607248] exynos-dwc3 usb@12000000: no suspend clk specified [ 1.613035] usb@12000000 supply vdd33 not found, using dummy regulator [ 1.619555] usb@12000000 supply vdd10 not found, using dummy regulator [ 1.627948] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.633009] ehci-pci: EHCI PCI platform driver [ 1.637455] ehci-platform: EHCI generic platform driver [ 1.642784] ehci-omap: OMAP-EHCI Host Controller driver [ 1.647929] ehci-orion: EHCI orion driver [ 1.651922] SPEAr-ehci: EHCI SPEAr driver [ 1.655917] ehci-st: EHCI STMicroelectronics driver [ 1.660781] ehci-exynos: EHCI EXYNOS driver [ 1.665037] ehci-atmel: EHCI Atmel driver [ 1.668938] tegra-ehci: Tegra EHCI driver [ 1.672935] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.679011] ohci-pci: OHCI PCI platform driver [ 1.683451] ohci-platform: OHCI generic platform driver [ 1.688749] ohci-omap3: OHCI OMAP3 driver [ 1.692718] SPEAr-ohci: OHCI SPEAr driver [ 1.696713] ohci-st: OHCI STMicroelectronics driver [ 1.701574] ohci-atmel: OHCI Atmel driver [ 1.705857] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.710963] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 1.718795] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.727280] xhci-hcd xhci-hcd.2.auto: irq 140, io mem 0x12000000 [ 1.733691] hub 1-0:1.0: USB hub found [ 1.737005] hub 1-0:1.0: 1 port detected [ 1.741094] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.746368] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 1.754037] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.762458] hub 2-0:1.0: USB hub found [ 1.765820] hub 2-0:1.0: 1 port detected [ 1.769995] usbcore: registered new interface driver usb-storage [ 1.776735] mousedev: PS/2 mouse device common for all mice [ 1.783 [PYBOOT] [arndale 23:41]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 23:42]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.630540] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.640744] ledtrig-cpu: registered to indicate activity on CPUs [ 1.647810] usbcore: registered new interface driver usbhid [ 1.653734] usbhid: USB HID core driver [ 1.665664] NET: Registered protocol family 10 [ 1.672237] sit: IPv6 over IPv4 tunneling driver [ 1.678357] NET: Registered protocol family 17 [ 1.683118] can: controller area network core (rev 20120528 abi 9) [ 1.689750] NET: Registered protocol family 29 [ 1.694469] can: raw protocol (rev 20120528) [ 1.698986] can: broadcast manager protocol (rev 20120528 t) [ 1.704977] can: netlink gateway (rev 20130117) max_hops=1 [ 1.711748] Key type dns_resolver registered [ 1.716629] omap_voltage_late_init: Voltage driver support not added [ 1.724907] ThumbEE CPU extension supported. [ 1.729542] Registering SWP/SWPB emulation handler [ 1.772227] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.778770] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786541] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795258] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803167] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.810989] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818802] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826151] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834836] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842758] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852488] mmc1: new high speed MMC card at address 0001 [ 1.859712] hctosys: unable to open rtc device (rtc0) [ 1.872732] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878755] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885761] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894629] mmcblk1: p1 p2 [ 1.900337] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:00]: got exception: timeout ~$off

[PYBOOT] [bbb 02:01]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.321041] sdhci: Secure Digital Host Controller Interface driver [ 1.327570] sdhci: Copyright(c) Pierre Ossman [ 1.333394] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.396153] Synopsys Designware Multimedia Card Interface Driver [ 1.403549] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.412772] ledtrig-cpu: registered to indicate activity on CPUs [ 1.419506] usbcore: registered new interface driver usbhid [ 1.425385] usbhid: USB HID core driver [ 1.435027] NET: Registered protocol family 10 [ 1.441510] sit: IPv6 over IPv4 tunneling driver [ 1.447390] NET: Registered protocol family 17 [ 1.452132] can: controller area network core (rev 20120528 abi 9) [ 1.458732] NET: Registered protocol family 29 [ 1.463432] can: raw protocol (rev 20120528) [ 1.467945] can: broadcast manager protocol (rev 20120528 t) [ 1.473924] can: netlink gateway (rev 20130117) max_hops=1 [ 1.480485] Key type dns_resolver registered [ 1.485287] omap_voltage_late_init: Voltage driver support not added [ 1.493093] ThumbEE CPU extension supported. [ 1.505689] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.513264] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.521345] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.529098] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.536795] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.544483] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.551772] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.559452] hctosys: unable to open rtc device (rtc0) [ 1.570268] Waiting for root device /dev/mmcblk0p2... [ 1.605426] mmc1: new high speed MMC card at address 0001 [ 1.611887] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.616954] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.623437] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.631878] mmcblk1: p1 p2

[PYBOOT] [bbb 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:58]: got exception: timeout ~$off

[PYBOOT] [bbb 01:59]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.053640] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.059756] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.066081] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.072954] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.082545] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.092042] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.099058] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.142420] ledtrig-cpu: registered to indicate activity on CPUs [ 2.151121] oprofile: using arm/armv7 [ 2.156262] Initializing XFRM netlink socket [ 2.161351] NET: Registered protocol family 10 [ 2.172247] sit: IPv6 over IPv4 tunneling driver [ 2.181060] NET: Registered protocol family 17 [ 2.186007] NET: Registered protocol family 15 [ 2.191261] Key type dns_resolver registered [ 2.196123] omap_voltage_late_init: Voltage driver support not added [ 2.202858] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.211322] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.221594] ThumbEE CPU extension supported. [ 2.226248] Registering SWP/SWPB emulation handler [ 2.231280] SmartReflex Class3 initialized [ 2.300968] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.308320] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.318939] mmc1: new high speed MMC card at address 0001 [ 2.331142] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.339504] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.347329] hctosys: unable to open rtc device (rtc0) [ 2.352786] sr_init: No PMIC hook to init smartreflex [ 2.358445] sr_init: platform driver register failed for SR [ 2.398923] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.406912] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.421261] mmcblk1: p1 p2 [ 2.438747] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.577901] sit: IPv6 over IPv4 tunneling driver [ 1.583203] NET: Registered protocol family 17 [ 1.587875] can: controller area network core (rev 20120528 abi 9) [ 1.594391] NET: Registered protocol family 29 [ 1.599053] can: raw protocol (rev 20120528) [ 1.603526] can: broadcast manager protocol (rev 20120528 t) [ 1.609465] can: netlink gateway (rev 20130117) max_hops=1 [ 1.615504] Key type dns_resolver registered [ 1.620069] omap_voltage_late_init: Voltage driver support not added [ 1.627292] Power Management for TI OMAP4+ devices. [ 1.632597] ThumbEE CPU extension supported. [ 1.637091] Registering SWP/SWPB emulation handler [ 1.643934] palmas 0-0058: Irq flag is 0x00000008 [ 1.667133] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698145] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.712880] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.719960] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745450] rtc-ds1307 2-006f: SET TIME! [ 1.751169] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.757839] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.766156] rtc-ds1307 2-006f: 64 bytes nvram [ 1.770759] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.779837] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.816038] vdd_3v3: supplied by regen1 [ 1.854995] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.872473] aic_dvdd_fixed: disabling [ 1.878053] ldousb: disabling [ 1.882157] Waiting for root device /dev/mmcblk0p1... [ 1.917009] mmc1: new high speed MMC card at address 0001 [ 1.922971] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.927876] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.934220] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.941087] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:50]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.582846] sit: IPv6 over IPv4 tunneling driver [ 1.588145] NET: Registered protocol family 17 [ 1.592815] can: controller area network core (rev 20120528 abi 9) [ 1.599328] NET: Registered protocol family 29 [ 1.603991] can: raw protocol (rev 20120528) [ 1.608459] can: broadcast manager protocol (rev 20120528 t) [ 1.614395] can: netlink gateway (rev 20130117) max_hops=1 [ 1.620432] Key type dns_resolver registered [ 1.624997] omap_voltage_late_init: Voltage driver support not added [ 1.632214] Power Management for TI OMAP4+ devices. [ 1.637528] ThumbEE CPU extension supported. [ 1.642023] Registering SWP/SWPB emulation handler [ 1.648839] palmas 0-0058: Irq flag is 0x00000008 [ 1.672050] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.702379] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.717050] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724113] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750394] rtc-ds1307 2-006f: SET TIME! [ 1.756145] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762810] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.771115] rtc-ds1307 2-006f: 64 bytes nvram [ 1.775715] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.784780] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.820965] vdd_3v3: supplied by regen1 [ 1.860140] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.877012] aic_dvdd_fixed: disabling [ 1.881030] ldousb: disabling [ 1.885120] Waiting for root device /dev/mmcblk0p1... [ 1.912181] mmc1: new high speed MMC card at address 0001 [ 1.918159] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.923053] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.929391] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.936253] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.462100] sit: IPv6 over IPv4 tunneling driver [ 1.467285] NET: Registered protocol family 17 [ 1.471954] can: controller area network core (rev 20120528 abi 9) [ 1.478457] NET: Registered protocol family 29 [ 1.483110] can: raw protocol (rev 20120528) [ 1.487577] can: broadcast manager protocol (rev 20120528 t) [ 1.493504] can: netlink gateway (rev 20130117) max_hops=1 [ 1.499471] Key type dns_resolver registered [ 1.504023] omap_voltage_late_init: Voltage driver support not added [ 1.510987] Power Management for TI OMAP4+ devices. [ 1.516253] ThumbEE CPU extension supported. [ 1.520834] ata1: SATA link down (SStatus 0 SControl 300) [ 1.527775] palmas 0-0058: Irq flag is 0x00000008 [ 1.553105] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.580835] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.594355] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.601405] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.626661] rtc-ds1307 2-006f: SET TIME! [ 1.632279] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.638942] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.647250] rtc-ds1307 2-006f: 64 bytes nvram [ 1.651829] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.659610] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.691869] vdd_3v3: supplied by regen1 [ 1.723353] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.736215] aic_dvdd_fixed: disabling [ 1.741193] ldousb: disabling [ 1.746984] Waiting for root device /dev/mmcblk0p1... [ 1.793239] mmc1: new high speed MMC card at address 0001 [ 1.799104] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.803952] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.810238] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.817015] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:59]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 02:00]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.164674] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.171538] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.181930] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.186798] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.193125] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.199979] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.209568] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.219075] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.226132] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.273604] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.279904] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.286776] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.296377] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.305880] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.312927] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.319051] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.325362] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.332211] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.341806] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.351307] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.358358] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.365041] vdd_3v3: supplied by regen1 [ 2.403722] hctosys: unable to open rtc device (rtc0) [ 2.409026] sr_init: No PMIC hook to init smartreflex [ 2.414538] sr_init: platform driver register failed for SR [ 2.460693] aic_dvdd_fixed: disabling [ 2.464961] ldousb: disabling [ 2.474071] Waiting for root device /dev/mmcblk0p1... [ 2.525331] mmc1: new high speed MMC card at address 0001 [ 2.533071] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.538432] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.545190] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.553617] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.153466] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.159051] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.166136] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.176133] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.185539] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.191052] vdd_1v8_gen: supplied by vdd_5v_in [ 3.197495] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.204111] [drm] No driver support for vblank timestamp query. [ 3.210047] drm drm: No connectors reported connected with modes [ 3.216053] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.241778] Console: switching to colour frame buffer device 128x48 [ 3.254057] drm drm: fb0: frame buffer device [ 3.273427] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.282022] usb3_vbus: supplied by vdd_5v_in [ 3.288434] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.294893] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.300305] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.308150] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.323437] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.330285] hub 1-0:1.0: USB hub found [ 3.334059] hub 1-0:1.0: 1 port detected [ 3.338940] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.344351] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.352084] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.363430] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.370202] hub 2-0:1.0: USB hub found [ 3.373970] hub 2-0:1.0: 1 port detected [ 3.382775] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.396390] vdd_sata,avdd_plle: disabling [ 3.401202] usb1_vbus: disabling [ 3.405330] Waiting for root device /dev/mmcblk0p1... [ 3.683435] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.622062] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:56]: got exception: timeout ~$off

[PYBOOT] [beaver 01:57]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.122762] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.128344] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.134954] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.144946] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.154107] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.159581] vdd_1v8_gen: supplied by vdd_5v_in [ 3.165209] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.171821] [drm] No driver support for vblank timestamp query. [ 3.177750] drm drm: No connectors reported connected with modes [ 3.183750] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.203062] Console: switching to colour frame buffer device 128x48 [ 3.214833] drm drm: fb0: frame buffer device [ 3.219269] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.227161] usb3_vbus: supplied by vdd_5v_in [ 3.233411] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.239858] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.245263] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.252984] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.267836] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.274198] hub 1-0:1.0: USB hub found [ 3.277963] hub 1-0:1.0: 1 port detected [ 3.282610] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.288018] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.295677] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.307834] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.314103] hub 2-0:1.0: USB hub found [ 3.317860] hub 2-0:1.0: 1 port detected [ 3.325365] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.338475] vdd_sata,avdd_plle: disabling [ 3.342862] usb1_vbus: disabling [ 3.346798] Waiting for root device /dev/mmcblk0p1... [ 3.627839] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.566374] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:50]: got exception: timeout ~$off

[PYBOOT] [beaver 01:51]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.424021] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.434025] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.442917] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.448437] vdd_1v8_gen: supplied by vdd_5v_in [ 3.457343] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.463981] [drm] No driver support for vblank timestamp query. [ 3.469978] drm drm: No connectors reported connected with modes [ 3.476002] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.501730] Console: switching to colour frame buffer device 128x48 [ 3.513562] drm drm: fb0: frame buffer device [ 3.540512] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.548033] usb3_vbus: supplied by vdd_5v_in [ 3.554143] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.560609] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.566031] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.574023] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.590512] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.598237] hub 1-0:1.0: USB hub found [ 3.602034] hub 1-0:1.0: 1 port detected [ 3.606849] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.612293] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.620170] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.640506] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.648099] hub 2-0:1.0: USB hub found [ 3.651884] hub 2-0:1.0: 1 port detected [ 3.660192] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.678967] vdd_sata,avdd_plle: disabling [ 3.683567] usb1_vbus: disabling [ 3.686992] ALSA device list: [ 3.689948] #0: NVIDIA Tegra Beaver [ 3.694191] Waiting for root device /dev/mmcblk0p1... [ 3.970509] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.955958] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:42]: got exception: timeout ~$off

[PYBOOT] [beaver 01:44]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 42.186631] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 42.200984] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.648631] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 90.075736] eth0: device MAC address 5e:09:b2:ce:4d:d3 [ 90.229279] RX IPC Checksum Offload disabled [ 90.233899] No MAC Management Counters available [ 90.239674] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/5e:09:b2:ce:4d:d3 Sending on LPF/eth0/5e:09:b2:ce:4d:d3 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.470769] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.545015] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.555342] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.629540] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.639863] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.714110] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.724437] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.798626] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.808956] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.883533] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.893854] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.968048] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.978376] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.052613] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.062936] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.137178] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.147502] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.221749] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.232074] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.306314] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.316635] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.390880] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.401207] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.475442] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.485769] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.559958] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.570280] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.644517] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.654840] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.729036] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.739360] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.813601] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.823923] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.082154] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156143] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.166215] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.240198] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250274] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324255] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.334334] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.408315] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.418394] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.492382] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.502465] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.576451] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.586518] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.660507] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.670598] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.744581] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.754656] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.828648] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.838730] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.912712] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.922799] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.996790] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.006863] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.080843] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.090921] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.164904] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.174981] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.248965] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259041] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333028] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343110] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417086] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427170] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:10]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:11]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.881851] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.955769] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.965822] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.039742] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.049796] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.123716] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.133770] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.207686] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.217751] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.291673] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.301737] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.375661] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.385733] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.459655] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.469716] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.543633] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.553682] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.627597] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.637647] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.711561] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.721611] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.795525] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.805576] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.879498] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.889549] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.963468] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.973523] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.047440] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.057497] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.131417] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.141478] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.215392] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.225452] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:09]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:10]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.490358] Key type dns_resolver registered [ 2.496720] ThumbEE CPU extension supported. [ 2.501137] Registering SWP/SWPB emulation handler [ 2.550650] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.556992] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.565469] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.580748] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.587512] [drm] No driver support for vblank timestamp query. [ 2.599350] mmc1: new high speed MMC card at address 0001 [ 2.606969] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.612677] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.620688] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.628739] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.639452] mmcblk1: p1 [ 2.766770] Console: switching to colour frame buffer device 240x75 [ 2.853207] drm drm: fb0: frame buffer device [ 2.875148] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.885192] usb2_vbus: supplied by vdd-sys-5v0 [ 2.895851] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.901447] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.910325] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.925181] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.935702] hub 1-0:1.0: USB hub found [ 2.939721] hub 1-0:1.0: 1 port detected [ 2.949563] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.963573] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.025997] dvdd_ts: disabling [ 3.029099] usb1_vbus: disabling [ 3.032467] vdd_cam_1v8_reg: disabling [ 3.040211] Waiting for root device /dev/mmcblk0p1... [ 3.250183] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.206144] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 60.851443] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.485865] Key type dns_resolver registered [ 2.492235] ThumbEE CPU extension supported. [ 2.496656] Registering SWP/SWPB emulation handler [ 2.525431] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.532475] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.541651] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.558667] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.565404] [drm] No driver support for vblank timestamp query. [ 2.584182] mmc1: new high speed MMC card at address 0001 [ 2.594264] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.601861] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.611535] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.620344] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.631739] mmcblk1: p1 [ 2.743552] Console: switching to colour frame buffer device 240x75 [ 2.830339] drm drm: fb0: frame buffer device [ 2.848688] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.858731] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870340] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.875932] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.884718] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.898710] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909023] hub 1-0:1.0: USB hub found [ 2.913032] hub 1-0:1.0: 1 port detected [ 2.923170] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.937135] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.999556] dvdd_ts: disabling [ 3.002654] usb1_vbus: disabling [ 3.006024] vdd_cam_1v8_reg: disabling [ 3.013561] Waiting for root device /dev/mmcblk0p1... [ 3.223707] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.201851] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.953662] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:04]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:06]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.037085] can: broadcast manager protocol (rev 20120528 t) [ 2.042840] can: netlink gateway (rev 20130117) max_hops=1 [ 2.049513] Key type dns_resolver registered [ 2.054618] ThumbEE CPU extension supported. [ 2.085592] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.090526] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.100602] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.122752] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.129432] [drm] No driver support for vblank timestamp query. [ 2.292741] Console: switching to colour frame buffer device 240x75 [ 2.380255] drm drm: fb0: frame buffer device [ 2.384942] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.393141] usb2_vbus: supplied by vdd-sys-5v0 [ 2.402071] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.407636] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.415540] mmc1: new high speed MMC card at address 0001 [ 2.422195] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.427223] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.433941] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.440025] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.446415] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.452553] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.460305] mmcblk1: p1 [ 2.465315] hub 1-0:1.0: USB hub found [ 2.472327] hub 1-0:1.0: 1 port detected [ 2.482050] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.493412] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.533931] dvdd_ts: disabling [ 2.537085] usb1_vbus: disabling [ 2.540365] vdd_cam_1v8_reg: disabling [ 2.545856] Waiting for root device /dev/mmcblk0p1... [ 2.785335] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.738417] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:53]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.669377] Bluetooth: RFCOMM ver 1.11 [ 2.673319] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.678712] Bluetooth: BNEP socket layer initialized [ 2.683798] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.689799] Bluetooth: HIDP socket layer initialized [ 2.696763] Key type dns_resolver registered [ 2.706385] Registering SWP/SWPB emulation handler [ 2.738642] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.745115] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.756035] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.779764] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.786568] [drm] No driver support for vblank timestamp query. [ 2.963272] Console: switching to colour frame buffer device 240x75 [ 3.049907] drm drm: fb0: frame buffer device [ 3.081758] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.088973] usb2_vbus: supplied by vdd-sys-5v0 [ 3.098351] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.104155] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.113271] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.131912] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.145430] hub 1-0:1.0: USB hub found [ 3.149471] hub 1-0:1.0: 1 port detected [ 3.163744] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.178019] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.266511] dvdd_ts: disabling [ 3.269616] usb1_vbus: disabling [ 3.273000] vdd_cam_1v8_reg: disabling [ 3.277666] ALSA device list: [ 3.280657] #0: NVIDIA Tegra Dalmore [ 3.286558] Waiting for root device /dev/mmcblk0p1... [ 3.471746] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.506356] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.429297] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.699201] usbcore: registered new interface driver usbhid [ 1.704368] usbhid: USB HID core driver [ 1.713122] NET: Registered protocol family 10 [ 1.713744] sit: IPv6 over IPv4 tunneling driver [ 1.716969] NET: Registered protocol family 17 [ 1.720987] NET: Registered protocol family 15 [ 1.725435] Key type dns_resolver registered [ 1.729766] Registering SWP/SWPB emulation handler [ 1.735619] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740180] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.768488] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770760] max98090 1-0010: use default 2.8v micbias [ 1.777996] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.780846] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.786091] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.788277] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.788282] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.788772] hub 1-3:1.0: USB hub found [ 1.788897] hub 1-3:1.0: 3 ports detected [ 1.817047] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.826701] mmc1: new DDR MMC card at address 0001 [ 1.831134] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.840771] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.844830] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.847109] VDD10_HDMI_1.0V: disabling [ 1.847768] vdd_g3d: disabling [ 1.848414] BUCK8_2.8V: disabling [ 1.849w77] ALSA device list: [ 1.849781] #0: Odroid-U3 [ 1.866485] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.872408] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.878969] mmcblk1: p1 p2 [ 1.883143] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:51]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.197751] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.206104] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.256269] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:12]: got exception: timeout ~$off

[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.970977] can: controller area network core (rev 20120528 abi 9) [ 1.977325] NET: Registered protocol family 29 [ 1.981811] can: raw protocol (rev 20120528) [ 1.986145] can: broadcast manager protocol (rev 20120528 t) [ 1.991851] can: netlink gateway (rev 20130117) max_hops=1 [ 1.998199] Key type dns_resolver registered [ 2.002838] ThumbEE CPU extension supported. [ 2.007171] Registering SWP/SWPB emulation handler [ 2.014984] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.021759] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.030944] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.037933] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.044921] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.051910] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.054077] mmc3: new high speed MMC card at address 0001 [ 2.054595] mmcblk3: mmc3:0001 3.53 GiB [ 2.054779] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.054931] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.055114] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.065093] mmcblk3: p1 p2 p3 p4 [ 2.094024] db8500-esram12: disabling [ 2.097778] db8500-esram34: disabling [ 2.101745] V-CSI/DSI: disabling [ 2.105041] mmci-reg: disabling [ 2.108703] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.114685] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.121002] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:02]: got exception: timeout ~$off

[PYBOOT] [snowball 02:04]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.903015] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.910552] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916809] usbcore: registered new interface driver usbhid [ 1.922393] usbhid: USB HID core driver [ 1.929687] NET: Registered protocol family 10 [ 1.985015] sit: IPv6 over IPv4 tunneling driver [ 1.990173] NET: Registered protocol family 17 [ 1.994659] can: controller area network core (rev 20120528 abi 9) [ 2.000885] NET: Registered protocol family 29 [ 2.005340] can: raw protocol (rev 20120528) [ 2.009613] can: broadcast manager protocol (rev 20120528 t) [ 2.015258] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021209] Key type dns_resolver registered [ 2.025665] ThumbEE CPU extension supported. [ 2.080017] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.094696] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.103820] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.110809] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.117797] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.124755] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.136535] db8500-esram12: disabling [ 2.184295] db8500-esram34: disabling [ 2.205047] V-CSI/DSI: disabling [ 2.214294] mmci-reg: disabling [ 2.217864] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.223846] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.244018] Waiting for root device /dev/mmcblk0p4... [ 3.047821] mmc3: new high speed MMC card at address 0001 [ 3.059631] mmcblk3: mmc3:0001 3.53 GiB [ 3.069763] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.079284] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.093811] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.100616] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 03:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 03:11]: got exception: timeout ~$off

[PYBOOT] [snowball 03:13]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.708740] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.719482] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.729431] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.740142] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.763702] NET: Registered protocol family 10 [ 2.768920] sit: IPv6 over IPv4 tunneling driver [ 2.774536] NET: Registered protocol family 17 [ 2.779022] NET: Registered protocol family 35 [ 2.783599] NET: Registered protocol family 37 [ 2.788177] Registering SWP/SWPB emulation handler [ 2.794525] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.800842] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.807403] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.814392] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-03-29 16:59:15 UTC (954349155) [ 2.823608] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.830596] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.837585] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.844573] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.858184] db8500-esram12: disabling [ 2.861968] db8500-esram34: disabling [ 2.865875] V-CSI/DSI: disabling [ 2.869171] mmci-reg: disabling [ 2.872467] ALSA device list: [ 2.875457] #0: MOP500-card [ 2.878814] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.884796] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.890991] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:56]: got exception: timeout ~$off

[PYBOOT] [snowball 01:57]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 20.242749] mmcblk0: error -110 sending status command, aborting [ 20.253819] mmcblk0: error -110 sending status command, retrying [ 20.262274] mmcblk0: error -110 sending status command, retrying [ 20.270726] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" [ 20.281957] mmcblk0: error -110 sending status command, retrying INIT: Id "4" respawning too fast: disab[ 20.293067] mmcblk0: error -110 sending status command, retrying led for 5 minutes [ 20.304314] mmcblk0: error -110 sending status command, aborting INIT: INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"

INIT: cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutesINIT: cannot execute "/sbin/getty" cannot execute "/sbin/getty"

INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes [ 20.371138] mmcblk0: error -110 sending status command, retrying [ 20.379614] mmcblk0: error -110 sending status command, retrying [ 20.388078] mmcblk0: error -110 sending status command, aborting [ 20.399178] mmcblk0: error -110 sending status command, retrying [ 20.407646] mmcblk0: error -110 sending status command, retrying [ 20.416082] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"

INIT: Id "S1" respawning too fast: disabled for 5 minutes [ 20.451982] mmcblk0: error -110 sending status command, retrying [ 20.460467] mmcblk0: error -110 sending status command, retrying [ 20.468932] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 47.005444] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:57]: Done.