Failed boards:
cubie2 sunxi_defconfig : FAILED 1:26.77 cubie2 multi_v7_defconfig : FAILED 1:38.38 cubie2 multi_lpae_defconfig : FAILED 1:22.31 cubox multi_v7_defconfig : FAILED 1:34.14 omap5uevm omap2plus_defconfig : FAILED 1:47.81 omap5uevm multi_v7_defconfig : FAILED 1:55.34 omap5uevm multi_lpae_defconfig : FAILED 1:44.10 snowball u8500_defconfig : FAILED 1:59.96
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:14.28 arndale exynos_defconfig : passed 1:14.02 arndale multi_v7_defconfig : passed 1:27.21 arndale multi_lpae_defconfig : passed 1:21.31 bbb omap2plus_defconfig : passed 1:38.28 bbb multi_v7_defconfig : passed 1:19.16 beaver tegra_defconfig : passed 1:16.05 beaver multi_v7_defconfig : passed 1:09.13 capri bcm_defconfig : passed 0:39.52 capri multi_v7_defconfig : passed 0:41.70 cubie sunxi_defconfig : passed 1:30.19 cubie multi_v7_defconfig : passed 1:19.72 dalmore tegra_defconfig : passed 1:26.95 dalmore multi_v7_defconfig : passed 1:28.40 dalmore multi_lpae_defconfig : passed 1:23.51 hummingboard imx_v6_v7_defconfig : passed 1:20.82 hummingboard multi_v7_defconfig : passed 1:19.15 jetson tegra_defconfig : passed 1:06.55 jetson multi_v7_defconfig : passed 0:58.01 jetson multi_lpae_defconfig : passed 1:04.11 panda omap2plus_defconfig : warnings 1:28.66 panda multi_v7_defconfig : passed 1:45.29 sama5 sama5_defconfig : passed 1:57.81 seaboard tegra_defconfig : passed 1:23.41 seaboard multi_v7_defconfig : passed 1:14.01 snow exynos_defconfig : passed 1:18.71 snow multi_v7_defconfig : passed 1:27.72 snow multi_lpae_defconfig : passed 1:20.44 snowball multi_v7_defconfig : passed 3:19.49 trimslice tegra_defconfig : passed 1:01.40 trimslice multi_v7_defconfig : passed 1:12.02 wandboard imx_v6_v7_defconfig : passed 1:10.53 wandboard multi_v7_defconfig : passed 1:11.71
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.265519] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.273023] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.278913] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.287882] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.296885] scsi0 : ahci_platform [ 1.300614] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.309313] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.314956] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.323032] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.335521] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.342579] hub 1-0:1.0: USB hub found [ 1.346425] hub 1-0:1.0: 1 port detected [ 1.351492] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.357160] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.365102] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.380505] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.387546] hub 2-0:1.0: USB hub found [ 1.391388] hub 2-0:1.0: 1 port detected [ 1.396418] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.403105] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.410988] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.475338] hub 3-0:1.0: USB hub found [ 1.479176] hub 3-0:1.0: 1 port detected [ 1.484187] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.490909] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.498752] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.560324] hub 4-0:1.0: USB hub found [ 1.564163] hub 4-0:1.0: 1 port detected [ 1.568836] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.656364] No MAC Management Counters available [ 1.661138] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.667767] IP-Config: Failed to open eth0 [ 1.671891] IP-Config: No network devices available [ 1.676811] vcc3v3: disabling [ 1.679776] vcc3v0: disabling [ 1.682871] ALSA device list: [ 1.685853] No soundcards found. [ 1.690014] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.265493] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.272998] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.278875] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.287842] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.296836] scsi0 : ahci_platform [ 1.300550] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.309270] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.314916] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.323002] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.335492] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.342536] hub 1-0:1.0: USB hub found [ 1.346395] hub 1-0:1.0: 1 port detected [ 1.351433] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.357079] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.365037] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.380473] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.387510] hub 2-0:1.0: USB hub found [ 1.391344] hub 2-0:1.0: 1 port detected [ 1.396359] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.403047] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.410934] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.475377] hub 3-0:1.0: USB hub found [ 1.479230] hub 3-0:1.0: 1 port detected [ 1.484233] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.490949] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.498793] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.560306] hub 4-0:1.0: USB hub found [ 1.564141] hub 4-0:1.0: 1 port detected [ 1.568822] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:18 UTC (18) [ 1.656330] No MAC Management Counters available [ 1.661101] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.667708] IP-Config: Failed to open eth0 [ 1.671829] IP-Config: No network devices available [ 1.676744] vcc3v3: disabling [ 1.679708] vcc3v0: disabling [ 1.682799] ALSA device list: [ 1.685775] No soundcards found. [ 1.689913] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.892217] usb1-vbus: 5000 mV [ 0.895650] usb2-vbus: 5000 mV [ 0.965808] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.973292] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.979181] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.988149] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.997082] scsi0 : ahci_platform [ 1.000727] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008949] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.014543] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.022403] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045829] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052795] hub 1-0:1.0: USB hub found [ 1.056646] hub 1-0:1.0: 1 port detected [ 1.061118] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066757] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.074597] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095774] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102664] hub 2-0:1.0: USB hub found [ 1.106496] hub 2-0:1.0: 1 port detected [ 1.110936] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.117608] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.125419] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.190584] hub 3-0:1.0: USB hub found [ 1.194371] hub 3-0:1.0: 1 port detected [ 1.198856] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.205485] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.213348] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.280597] hub 4-0:1.0: USB hub found [ 1.284388] hub 4-0:1.0: 1 port detected [ 1.288746] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:18 UTC (18) [ 1.375802] ata1: SATA link down (SStatus 0 SControl 300) [ 1.392097] No MAC Management Counters available [ 1.396861] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.403454] IP-Config: Failed to open eth0 [ 1.407576] IP-Config: No network devices available [ 1.412472] vcc3v3: disabling [ 1.415437] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.240711] SPEAr-ehci: EHCI SPEAr driver [ 1.244817] tegra-ehci: Tegra EHCI driver [ 1.248952] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.255135] ohci-pci: OHCI PCI platform driver [ 1.259641] ohci-platform: OHCI generic platform driver [ 1.264955] ohci-omap3: OHCI OMAP3 driver [ 1.269053] SPEAr-ohci: OHCI SPEAr driver [ 1.273796] usbcore: registered new interface driver usb-storage [ 1.281316] mousedev: PS/2 mouse device common for all mice [ 1.288310] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297621] i2c /dev entries driver [ 1.303399] usbcore: registered new interface driver uvcvideo [ 1.309149] USB Video Class driver (1.1.1) [ 1.313242] gspca_main: v2.14.0 registered [ 1.320381] orion_wdt: Initial timeout 25 sec [ 1.325866] sdhci: Secure Digital Host Controller Interface driver [ 1.332028] sdhci: Copyright(c) Pierre Ossman [ 1.337062] Synopsys Designware Multimedia Card Interface Driver [ 1.343433] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.349832] usbcore: registered new interface driver usbhid [ 1.355391] usbhid: USB HID core driver [ 1.360362] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368886] TCP: cubic registered [ 1.372237] NET: Registered protocol family 17 [ 1.376690] can: controller area network core (rev 20120528 abi 9) [ 1.382924] NET: Registered protocol family 29 [ 1.387364] can: raw protocol (rev 20120528) [ 1.391628] can: broadcast manager protocol (rev 20120528 t) [ 1.397283] can: netlink gateway (rev 20130117) max_hops=1 [ 1.403151] Key type dns_resolver registered [ 1.407623] ThumbEE CPU extension supported. [ 1.411906] Registering SWP/SWPB emulation handler [ 1.416696] PJ4 iWMMXt v2 coprocessor enabled. [ 1.422288] USB Power: 5000 mV [ 1.425865] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-05 16:31:23 UTC (1401985883) [ 1.436396] ALSA device list: [ 1.439346] No soundcards found. [ 1.443284] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.636860] can: raw protocol (rev 20120528) [ 47.636865] can: broadcast manager protocol (rev 20120528 t) [ 47.636875] can: netlink gateway (rev 20130117) max_hops=1 [ 47.637168] Key type dns_resolver registered [ 47.637258] omap_vc_init_channel: No PMIC info for vdd_core [ 47.637260] omap_vp_init: No PMIC info for vdd_core [ 47.637264] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.637266] omap_vp_init: No PMIC info for vdd_mm [ 47.637270] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.637272] omap_vp_init: No PMIC info for vdd_mpu [ 47.637579] ThumbEE CPU extension supported. [ 47.637595] Registering SWP/SWPB emulation handler [ 47.663348] palmas 0-0048: Irq flag is 0x00000000 [ 47.720609] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.727345] mmc0: new high speed MMC card at address 0001 [ 47.733243] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.738068] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.744326] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.751201] mmcblk0: unknown partition table [ 47.756185] smps123: 600 <--> 1500 mV at 1060 mV [ 47.761121] mmcblk0boot1: unknown partition table [ 47.766947] mmcblk0boot0: unknown partition table [ 47.772781] smps45: 600 <--> 1310 mV at 1030 mV [ 47.779230] smps6: 1200 mV [ 47.783228] smps7: 1800 mV [ 47.787361] smps8: 600 <--> 1310 mV at 1040 mV [ 47.793084] smps9: failed to get the current voltage [ 47.798334] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.810380] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.937408] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.082417] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.088496] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.095927] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.102784] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.110490] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.123926] ALSA device list: [ 48.127023] No soundcards found. [ 48.131027] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 48.081689] can: raw protocol (rev 20120528) [ 48.081695] can: broadcast manager protocol (rev 20120528 t) [ 48.081706] can: netlink gateway (rev 20130117) max_hops=1 [ 48.081998] Key type dns_resolver registered [ 48.082091] omap_vc_init_channel: No PMIC info for vdd_core [ 48.082094] omap_vp_init: No PMIC info for vdd_core [ 48.082097] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.082099] omap_vp_init: No PMIC info for vdd_mm [ 48.082103] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.082105] omap_vp_init: No PMIC info for vdd_mpu [ 48.082420] ThumbEE CPU extension supported. [ 48.082436] Registering SWP/SWPB emulation handler [ 48.097933] palmas 0-0048: Irq flag is 0x00000000 [ 48.165377] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.172116] mmc0: new high speed MMC card at address 0001 [ 48.177981] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.182807] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.189081] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.195930] mmcblk0: unknown partition table [ 48.200946] smps123: 600 <--> 1500 mV at 1060 mV [ 48.205885] mmcblk0boot1: unknown partition table [ 48.211720] mmcblk0boot0: unknown partition table [ 48.217575] smps45: 600 <--> 1310 mV at 1030 mV [ 48.223995] smps6: 1200 mV [ 48.227993] smps7: 1800 mV [ 48.232109] smps8: 600 <--> 1310 mV at 1040 mV [ 48.237844] smps9: failed to get the current voltage [ 48.243088] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.255129] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.382243] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.527251] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.533332] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.540766] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.547618] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.555326] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.568699] ALSA device list: [ 48.571792] No soundcards found. [ 48.575790] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.565870] NET: Registered protocol family 15 [ 2.566053] Key type dns_resolver registered [ 2.566157] omap_vc_init_channel: No PMIC info for vdd_core [ 2.566160] omap_vp_init: No PMIC info for vdd_core [ 2.566169] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.566172] omap_vp_init: No PMIC info for vdd_mm [ 2.566181] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.566184] omap_vp_init: No PMIC info for vdd_mpu [ 2.566734] ThumbEE CPU extension supported. [ 2.566755] Registering SWP/SWPB emulation handler [ 2.566771] SmartReflex Class3 initialized [ 2.595926] palmas 0-0048: Irq flag is 0x00000000 [ 2.674189] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.679380] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.685877] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.694753] mmcblk0: unknown partition table [ 2.700542] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.707568] mmcblk0boot1: unknown partition table [ 2.715972] mmcblk0boot0: unknown partition table [ 2.766211] smps123: 600 <--> 1500 mV at 1060 mV [ 2.773308] smps45: 600 <--> 1310 mV at 1030 mV [ 2.780886] smps6: 1200 mV [ 2.785709] smps7: 1800 mV [ 2.790672] smps8: 600 <--> 1310 mV at 1040 mV [ 2.797218] smps9: failed to get the current voltage [ 2.803167] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.817510] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.826355] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.833494] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.839655] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.848760] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.858094] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.865044] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.873591] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.882237] sr_init: No PMIC hook to init smartreflex [ 2.887702] sr_init: platform driver register failed for SR [ 2.915964] pbias_mmc_omap5: disabling [ 2.921498] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.509185] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.521118] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.528411] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.539916] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.548492] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.560424] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.567749] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.579223] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.587036] HS USB OTG: no transceiver configured [ 3.591766] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.599609] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.607543] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.619476] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.626770] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.638275] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.646850] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.658752] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.666076] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.677551] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.685363] HS USB OTG: no transceiver configured [ 3.690093] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.697937] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.705871] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.717773] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.725097] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.736602] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.745178] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.757080] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.764404] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.775878] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.783721] HS USB OTG: no transceiver configured [ 3.788421] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.796295] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.804229] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.816162] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.823455] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.834960] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.843536] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout