Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160922/
Failed boards:
beaver arm-tegra_defconfig : FAILED 1:43.87 beaver arm-multi_v7_defconfig : FAILED 1:49.29 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:57.85 capri bcm_defconfig : NO BUILD chitra powerpc-ppc64_defconfig : FAILED 1:59.18 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:25.72 cubox arm-multi_v7_defconfig : FAILED 1:47.46 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 2:00.00 omap5uevm arm-multi_v7_defconfig : FAILED 2:09.61 omap5uevm arm-multi_lpae_defconfig : FAILED 2:13.50 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:27.45 pandaes arm-omap2plus_defconfig : FAILED 2:18.70 pandaes arm-multi_v7_defconfig : FAILED 2:16.10 pandaes arm-multi_v7_nosmp_defconfig : FAILED 2:29.14 pit arm-exynos_defconfig : FAILED 1:48.71 snowball arm-u8500_defconfig : FAILED 3:12.58 wandboard arm-multi_v7_defconfig : FAILED 1:45.99 wandboard arm-multi_v7_nosmp_defconfig : FAILED 1:03.19
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:26.16 arndale arm-exynos_defconfig : passed 3:20.63 arndale arm-multi_v7_defconfig : passed 1:20.43 arndale arm-multi_lpae_defconfig : passed 1:26.27 arndale arm-multi_v7_nosmp_defconfig : warnings 1:19.71 bbb arm-omap2plus_defconfig : passed 2:20.45 bbb arm-multi_v7_defconfig : passed 1:34.13 beagleboard-x15 arm-omap2plus_defconfig : passed 0:53.73 beagleboard-x15 arm-multi_v7_defconfig : passed 0:50.70 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:48.31 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 0:58.98 capri arm-multi_v7_defconfig : passed 0:51.03 capri arm-multi_v7_nosmp_defconfig : warnings 0:56.22 chitra powerpc-pasemi_defconfig : passed 1:36.86 colombus arm-sunxi_defconfig : passed 2:04.32 colombus arm-multi_v7_defconfig : passed 2:22.72 colombus arm-multi_lpae_defconfig : passed 2:09.54 cosmic arm-imx_v6_v7_defconfig : passed 4:11.43 cosmic arm-multi_v7_defconfig : passed 3:05.48 cosmic arm-multi_v7_nosmp_defconfig : passed 3:00.53 cubie arm-sunxi_defconfig : passed 1:07.05 cubie arm-multi_v7_defconfig : passed 0:58.73 cubie arm-multi_v7_nosmp_defconfig : passed 1:18.28 cubie2 arm-sunxi_defconfig : passed 1:00.91 cubie2 arm-multi_v7_defconfig : passed 0:59.54 cubie2 arm-multi_lpae_defconfig : passed 1:16.21 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:06.73 cubox arm-mvebu_v7_defconfig : passed 1:16.51 cubox arm-multi_v7_nosmp_defconfig : passed 1:24.57 jetsontk1 arm-tegra_defconfig : passed 0:49.47 jetsontk1 arm-multi_v7_defconfig : passed 0:47.27 jetsontk1 arm-multi_lpae_defconfig : passed 0:57.54 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:08.64 omap5uevm arm-omap2plus_defconfig : passed 1:20.95 pi arm-exynos_defconfig : passed 3:11.12 pi arm-multi_v7_defconfig : passed 3:15.92 pi arm-multi_lpae_defconfig : passed 3:22.22 pi arm-multi_v7_nosmp_defconfig : warnings 3:05.82 pit arm-multi_v7_defconfig : passed 3:13.02 pit arm-multi_lpae_defconfig : passed 3:18.35 pit arm-multi_v7_nosmp_defconfig : warnings 3:05.94 seaboard arm-tegra_defconfig : passed 3:18.52 seaboard arm-multi_v7_defconfig : passed 3:26.44 seaboard arm-multi_v7_nosmp_defconfig : warnings 3:24.51 seattle arm64-defconfig : warnings 2:26.50 snow arm-exynos_defconfig : passed 3:36.97 snow arm-multi_v7_defconfig : passed 2:07.65 snow arm-multi_lpae_defconfig : passed 1:58.84 snow arm-multi_v7_nosmp_defconfig : warnings 2:03.45 snowball arm-multi_v7_defconfig : warnings 2:56.01 snowball arm-multi_v7_nosmp_defconfig : warnings 1:55.22 trimslice arm-tegra_defconfig : passed 3:18.56 trimslice arm-multi_v7_defconfig : passed 3:25.32 trimslice arm-multi_v7_nosmp_defconfig : warnings 3:26.45 wandboard arm-imx_v6_v7_defconfig : passed 1:22.96
Offline boards:
bbb arm-multi_v7_nosmp_defconfig : OFFLINE 1:46.03 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:12.67 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:19.49 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:28.80 dalmore arm-tegra_defconfig : OFFLINE 2:17.75 dalmore arm-multi_v7_defconfig : OFFLINE 2:18.70 dalmore arm-multi_lpae_defconfig : OFFLINE 2:31.24 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.81 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:16.27 hummingboard arm-multi_v7_defconfig : OFFLINE 2:27.80 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.10 parallella arm-multi_v7_defconfig : OFFLINE 2:27.52 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.79 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:43.51 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:46.32 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:50.09 sama5 arm-sama5_defconfig : OFFLINE 2:15.90 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:29.80 socfpga arm-socfpga_defconfig : OFFLINE 2:13.98 socfpga arm-multi_v7_defconfig : OFFLINE 2:27.04 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.01
Board legend is available at http://arm-soc.lixom.net/boards.html
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.278101] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.285056] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.291574] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.298530] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.304113] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.311143] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09ef000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.321133] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.332068] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.338689] [drm] No driver support for vblank timestamp query. [ 3.344624] drm drm: No connectors reported connected with modes [ 3.350628] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.375555] Console: switching to colour frame buffer device 128x48 [ 3.387353] drm drm: fb0: frame buffer device [ 3.403677] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.414469] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.420933] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.426342] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.434173] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.453689] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.460130] hub 1-0:1.0: USB hub found [ 3.463918] hub 1-0:1.0: 1 port detected [ 3.468897] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.474307] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.482046] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.498672] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.505034] hub 2-0:1.0: USB hub found [ 3.508804] hub 2-0:1.0: 1 port detected [ 3.517591] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.531315] vdd_sata,avdd_plle: disabling [ 3.536020] usb1_vbus: disabling [ 3.540116] Waiting for root device /dev/mmcblk0p1... [ 3.838679] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.438777] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 4.937790] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 4.944743] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 4.951260] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 4.958211] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.963793] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 5.083604] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09ef000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 5.093596] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 5.123960] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.130571] [drm] No driver support for vblank timestamp query. [ 5.136504] drm drm: No connectors reported connected with modes [ 5.142506] [drm] Cannot find any crtc or sizes - going 1024x768 [ 5.194088] Console: switching to colour frame buffer device 128x48 [ 5.223150] drm drm: fb0: frame buffer device [ 5.227584] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.237705] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 5.244175] tegra-ehci 7d004000.usb: EHCI Host Controller [ 5.249581] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 5.293248] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 5.313152] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 5.328234] hub 1-0:1.0: USB hub found [ 5.331988] hub 1-0:1.0: 1 port detected [ 5.343988] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.349398] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 5.368230] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 5.388152] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 5.403221] hub 2-0:1.0: USB hub found [ 5.406972] hub 2-0:1.0: 1 port detected [ 5.421714] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 5.434861] vdd_sata,avdd_plle: disabling [ 5.458164] usb1_vbus: disabling [ 5.462086] Waiting for root device /dev/mmcblk0p1... [ 5.748156] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.196680] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:55]: got exception: timeout ~$off
[PYBOOT] [beaver 01:56]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 7.024174] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 7.031232] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.036831] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 7.044336] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 7.054334] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.067264] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.073898] [drm] No driver support for vblank timestamp query. [ 7.079843] drm drm: No connectors reported connected with modes [ 7.085854] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.112989] Console: switching to colour frame buffer device 128x48 [ 7.124789] drm drm: fb0: frame buffer device [ 7.161004] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 7.170138] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 7.176627] tegra-ehci 7d004000.usb: EHCI Host Controller [ 7.182057] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 7.190013] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 7.221010] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 7.228850] hub 1-0:1.0: USB hub found [ 7.232648] hub 1-0:1.0: 1 port detected [ 7.237396] tegra-ehci 7d008000.usb: EHCI Host Controller [ 7.242817] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 7.250720] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 7.280998] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 7.288676] hub 2-0:1.0: USB hub found [ 7.292459] hub 2-0:1.0: 1 port detected [ 7.302009] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 7.320063] vdd_sata,avdd_plle: disabling [ 7.324837] usb1_vbus: disabling [ 7.328225] ALSA device list: [ 7.331228] #0: NVIDIA Tegra Beaver [ 7.335379] Waiting for root device /dev/mmcblk0p1... [ 7.651004] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.327637] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:42]: got exception: timeout ~$off
[PYBOOT] [beaver 01:43]: Done. Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------
Sorting __ex_table... Memory: 4023488K/4194304K available (10088K kernel code, 1768K rwdata, 3476K rodata, 4240K init, 1043K bss, 170816K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... Brought up 2 CPUs span: 0-1 (max cpu_capacity = 1024) devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (22) used greatest stack depth: 12992 bytes left NET: Registered protocol family 16 eeh_init: Platform EEH operation not found IBM eBus Device Driver cpuidle: using governor menu kworker/u4:0 (39) used greatest stack d [PYBOOT] [chitra 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [chitra 01:57]: got exception: timeout ~$off
[PYBOOT] [chitra 01:58]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
INIT: version 2.88 booting [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [ 18.193787] random: fast init done [....] Starting the hotplug events dispatcher: udevd[ 20.948212] udevd[181]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 63.675717] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 63.705356] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 145.178970] eth0: device MAC address 76:26:30:8e:02:c5 [ 145.226166] RX IPC Checksum Offload disabled [ 145.230783] No MAC Management Counters available [ 145.236558] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/76:26:30:8e:02:c5 Sending on LPF/eth0/76:26:30:8e:02:c5 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
[PYBOOT] [colombus 03:23]: Timed out waiting for "<type 'str'>": DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21
[PYBOOT] [colombus 03:24]: got exception: timeout ~$off
[PYBOOT] [colombus 03:25]: Done. Board cubox-arm-multi_v7_defconfig failure log: -------------------------------------------------
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 14.765564] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/00:50:43:38:27:22 Sending on LPF/eth0/00:50:43:38:27:22 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 [ 17.832312] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 17.842160] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPOFFER from 172.16.20.1 DHCPACK from 172.16.20.1 bound to 172.16.20.124 -- renewal in 35551 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
Debian GNU/Linux 7.0 cubox ttyS0
cubox login: [ 47.523009] random: crng init done
[PYBOOT] [cubox 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubox 01:45]: got exception: timeout ~$off
[PYBOOT] [cubox 01:46]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.803896] of_clk_max77686_get: invalid index 0 [ 1.808166] ERROR: could not get clock /rtc@10070000:rtc_src(1) [ 1.814069] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.823781] s3c-rtc 10070000.rtc: failed to find rtc source clock [ 1.829851] mmc1: new DDR MMC card at address 0001 [ 1.834836] s3c-rtc: probe of 10070000.rtc failed with error -2 [ 1.840596] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.845171] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.851619] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.856964] exynos-bus: new bus device registered: bus_dmc (100000 KHz ~ 400000 KHz) [ 1.857487] exynos-bus: new bus device registered: bus_acp (100000 KHz ~ 267000 KHz) [ 1.857802] exynos-bus: new bus device registered: bus_c2c (100000 KHz ~ 400000 KHz) [ 1.864678] exynos-bus: new bus device registered: bus_leftbus (100000 KHz ~ 200000 KHz) [ 1.864996] exynos-bus: new bus device registered: bus_rightbus (100000 KHz ~ 200000 KHz) [ 1.865415] exynos-bus: new bus device registered: bus_display (160000 KHz ~ 200000 KHz) [ 1.865822] exynos-bus: new bus device registered: bus_fsys (100000 KHz ~ 134000 KHz) [ 1.866239] exynos-bus: new bus device registered: bus_peri ( 50000 KHz ~ 100000 KHz) [ 1.866565] exynos-bus: new bus device registered: bus_mfc (100000 KHz ~ 200000 KHz) [ 1.912061] max98090 1-0010: MAX98090 REVID=0x43 [ 1.913513] devfreq bus_dmc: Couldn't update frequency transition information. [ 1.921348] devfreq bus_leftbus: Couldn't update frequency transition information. [ 1.946931] max98090 1-0010: use default 2.8v micbias [ 1.952652] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.959625] mmcblk1: p1 p2 [ 1.968569] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.973830] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.010262] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.032876] VDD10_HDMI_1.0V: disabling [ 2.034625] vdd_g3d: disabling [ 2.035850] BUCK8_P3V3: disabling [ 2.040705] ALSA device list: [ 2.040780] #0: Odroid-U3 [ 2.044985] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:56]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:57]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.854761] palmas 0-0048: Muxing GPIO 3, PWM 0, LED 0 [ 1.865969] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.881327] SMPS6: supplied by vsys_cobra [ 1.885834] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.892036] random: fast init done [ 1.897179] SMPS7: supplied by vsys_cobra [ 1.902103] vdds_1v8_main: supplied by smps7 [ 1.907464] SMPS8: supplied by vsys_cobra [ 1.923641] SMPS9: supplied by vsys_cobra [ 1.937464] smps9: Bringing 0uV into 2100000-2100000uV [ 1.954877] LDO1: supplied by vsys_cobra [ 1.967461] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.982836] ldo1: ramp_delay not set [ 1.987117] LDO2: supplied by vsys_cobra [ 2.002461] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.017821] ldo2: ramp_delay not set [ 2.022104] LDO3: supplied by vdds_1v8_main [ 2.038756] LDO4: supplied by vdds_1v8_main [ 2.052462] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.067830] ldo4: ramp_delay not set [ 2.072112] LDO5: supplied by vsys_cobra [ 2.088755] LDO6: supplied by vdds_1v8_main [ 2.105264] LDO7: supplied by vsys_cobra [ 2.117464] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.132833] ldo7: ramp_delay not set [ 2.137127] LDO8: supplied by vsys_cobra [ 2.153769] LDO9: supplied by vmmcsd_fixed [ 2.168910] LDOLN: supplied by vsys_cobra [ 2.183775] LDOUSB: supplied by vsys_cobra [ 2.201088] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.217611] 4-0022 supply vcc not found, using dummy regulator [ 2.238004] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.253549] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.261435] cpufreq: cpufreq_online:[ 2.264886] Un [PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:12]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.928678] SMPS9: supplied by vsys_cobra [ 1.942500] smps9: Bringing 0uV into 2100000-2100000uV [ 1.959913] LDO1: supplied by vsys_cobra [ 1.972489] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.987868] ldo1: ramp_delay not set [ 1.992150] LDO2: supplied by vsys_cobra [ 2.007498] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.022869] ldo2: ramp_delay not set [ 2.027162] LDO3: supplied by vdds_1v8_main [ 2.043791] LDO4: supplied by vdds_1v8_main [ 2.057497] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.072865] ldo4: ramp_delay not set [ 2.077150] LDO5: supplied by vsys_cobra [ 2.093789] LDO6: supplied by vdds_1v8_main [ 2.110304] LDO7: supplied by vsys_cobra [ 2.122497] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.137866] ldo7: ramp_delay not set [ 2.142160] LDO8: supplied by vsys_cobra [ 2.158805] LDO9: supplied by vmmcsd_fixed [ 2.173947] LDOLN: supplied by vsys_cobra [ 2.188806] LDOUSB: supplied by vsys_cobra [ 2.206115] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.222650] 4-0022 supply vcc not found, using dummy regulator [ 2.243040] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.258585] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.266468] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 23.272276] INFO: rcu_sched detected stalls on CPUs/tasks: [ 23.277996] 0-...: (0 ticks this GP) idle=f4d/140000000000000/0 softirq=42/42 fqs=2100 [ 23.286424] (detected by 1, t=4202 jiffies, g=-276, c=-277, q=22) [ 23.292868] Task dump for CPU 0: [ 23.296229] kworker/0:2 R running 0 80 2 0x00000002 [ 23.302869] Workqueue: events deferred_probe_work_func [ 23.308228] [<c0bc391c>] (__schedule) from [<ee02b248>] (0xee02b248)
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 28.149951] Exception stack(0xee66e2c0 to 0xee66e308) [ 28.155215] e2c0: 000006c0 20646e95 c1133980 c1139150 20646e75 20646e95 00000005 20646e75 [ 28.163740] e2e0: 20646e95 ee66e000 5f766598 00000014 600001d3 ee66e310 c031a734 c0315570 [ 28.172260] e300: 200001d3 ffffffff [ 28.175896] [<c030be38>] (__dabt_svc) from [<c0315570>] (show_pte+0x20/0xf4) [ 28.183243] [<c0315570>] (show_pte) from [<c031a734>] (__do_kernel_fault.part.0+0x50/0x1e4) [ 28.191948] [<c031a734>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 28.201201] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 28.209183] [<c0301298>] (do_DataAbort) from [<c030be38>] (__dabt_svc+0x58/0x80) [ 28.216888] Exception stack(0xee66e418 to 0xee66e460) [ 28.222145] e400: 000006c0 20646e95 [ 28.230676] e420: c1133980 c1139150 20646e75 20646e95 00000005 20646e75 20646e95 ee66e000 [ 28.239198] e440: 5f766598 00000014 600001d3 ee66e468 c031a734 c0315570 200001d3 ffffffff [ 28.247730] [<c030be38>] (__dabt_svc) from [<c0315570>] (show_pte+0x20/0xf4) [ 28.255073] [<c0315570>] (show_pte) from [<c031a734>] (__do_kernel_fault.part.0+0x50/0x1e4) [ 28.263780] [<c031a734>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 28.273028] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 28.281011] [<c0301298>] (do_DataAbort) from [<c030be38>] (__dabt_svc+0x58/0x80) [ 28.288722] Exception stack(0xee66e570 to 0xee66e5b8) [ 28.293986] e560: 000006c0 20646e95 c1133980 c1139150 [ 28.302515] e580: 20646e75 20646e95 00000005 20646e75 20646e95 ee66e000 5f766598 00000014 [ 28.311045] e5a0: 600001d3 ee66e5c0 c031a734 c0315570 200001d3 ffffffff [ 28.317942] [<c030be38>] (__dabt_svc) from [<c0315570>] (show_pte+0x20/0xf4) [ 28.325290] [<c0315570>] (show_pte) from [<c031a734>] (__do_kernel_fault.part.0+0x50/0x1e4) [ 28.334001] [<c031a734>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 28.343252] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 28.351230] [<c0301298>] (do_DataAbort) from [<c030be38>] (__dabt_svc+0x58/0x80) [ 28.358938] Exception stack(0xee66e6c8 to 0xee66e710) [ 28.364200] e6c0: 000006c0 20646e95 c1133980 c1139150 20646e75 20646e95 [ 28.372726] e6e0: 00000005 20646e75 20646e95 ee66e000 5f766598 00000014 600001d3 ee66e718 [ 28.381249] e700: c031a734 c0315570 200001d3 ffffffff [ 28.386508] [<c030be38>] (__dabt_svc) from [<c0315570>] (show_pte+0x20/0xf4) [ 28.393856] [<c0315570>] (show_pte) from [<c031a734>] (__do_kernel_fault.part.0+0x50/0x1e4) [ 28.402560] [<c031a734>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 28.411806] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 28.419786] [<c0301298>] (do_DataAbort) from [<c030be38>] (__dabt_svc+0x5 [PYBOOT] [omap5uevm 01:25]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:26]: Done. Board pandaes-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.972595] twl: not initialized [ 1.975982] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.984313] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.992675] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.001007] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.009368] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.017700] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.026031] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.034606] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.041870] omap2_set_init_voltage: unable to set vdd_core [ 2.047576] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.054748] omap2_set_init_voltage: unable to set vdd_iva [ 2.060455] Power Management for TI OMAP4+ devices. [ 2.065521] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.072845] ThumbEE CPU extension supported. [ 2.077331] Registering SWP/SWPB emulation handler [ 2.084503] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.109466] twl 0-0048: PIH (irq 339) nested IRQs [ 2.115753] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.123168] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.131622] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.149627] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.160125] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.166870] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.173248] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.353363] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.369293] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.379302] VDAC: disabling [ 2.382659] VANA: disabling [ 2.385742] random: fast init done [ 2.389587] VUSB: disabling [ 2.393341] Waiting for root device /dev/mmcblk0p2... [ 2.416717] mmc1: new SDIO card at address 0001
[PYBOOT] [pandaes 02:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:14]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:15]: Done. Board pandaes-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.309387] Key type dns_resolver registered [ 3.313995] twl: not initialized [ 3.317352] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.325683] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.334045] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.342376] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.350738] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.359069] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.367401] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 3.375976] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.383239] omap2_set_init_voltage: unable to set vdd_core [ 3.388946] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 3.396118] omap2_set_init_voltage: unable to set vdd_iva [ 3.401824] Power Management for TI OMAP4+ devices. [ 3.406890] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 3.414093] ThumbEE CPU extension supported. [ 3.563018] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 3.586547] twl 0-0048: PIH (irq 339) nested IRQs [ 3.604095] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 3.627288] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 3.635406] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 3.670410] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 3.689727] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 3.733459] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 3.739746] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 3.952239] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.968688] random: fast init done [ 3.972259] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 4.000366] VDAC: disabling [ 4.003845] VANA: disabling [ 4.010803] VUSB: disabling [ 4.017730] mmc1: new SDIO card at address 0001 [ 4.027313] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [pandaes 02:26]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:27]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:28]: Done. Board pandaes-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.699401] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 4.706939] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 4.715209] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 4.721313] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.728271] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.735107] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.744689] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.746154] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.761199] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.767364] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.773681] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.780517] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.790100] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.799591] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.806640] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.876281] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 4.876281] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 4.890197] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 4.899780] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 4.902099] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 4.916290] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 5.067047] hctosys: unable to open rtc device (rtc0) [ 5.073120] sr_init: No PMIC hook to init smartreflex [ 5.078430] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 5.086914] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 5.096008] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 5.146697] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 5.157714] VDAC: disabling [ 5.161468] VANA: disabling [ 5.165283] VUSB: disabling [ 5.172210] Waiting for root device /dev/mmcblk0p2... [ 5.181579] random: fast init done [ 5.191680] mmc1: new SDIO card at address 0001
[PYBOOT] [pandaes 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:16]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:18]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 81.090118] snow-audio sound: snd_soc_register_card failed (-517) [ 81.100579] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.110115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.120574] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.130116] snow-audio sound: snd_soc_register_card failed (-517) [ 81.140580] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.150116] snow-audio sound: snd_soc_register_card failed (-517) [ 81.160576] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.170115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.180582] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.190116] snow-audio sound: snd_soc_register_card failed (-517) [ 81.200579] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.210116] snow-audio sound: snd_soc_register_card failed (-517) [ 81.220569] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.230116] snow-audio sound: snd_soc_register_card failed (-517) [ 81.240579] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.250115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.260587] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.270115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.280593] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.290116] snow-audio sound: snd_soc_register_card failed (-517) [ 81.300595] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.310118] snow-audio sound: snd_soc_register_card failed (-517) [ 81.320585] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.330117] snow-audio sound: snd_soc_register_card failed (-517) [ 81.340601] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.350116] snow-audio sound: snd_soc_register_card failed (-517) [ 81.360588] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.370115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.380589] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.390115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.400591] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.410115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.420593] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.430116] snow-audio sound: snd_soc_register_card failed (-517) [ 81.440588] snow-audio sound: ASoC: CPU DAI (null) not register [PYBOOT] [pit 01:46]: got exception: timeout ~$off
[PYBOOT] [pit 01:47]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 9.859527] EXT4-fs (mmcblk3p4): dirty_blocks=4 [ 9.864105] EXT4-fs (mmcblk3p4): Block reservation details [ 9.869598] EXT4-fs (mmcblk3p4): i_reserved_data_blocks=1 [ 9.884246] JBD2: Spotted dirty metadata buffer (dev = mmcblk3p4, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [ 10.164184] JBD2: Spotted dirty metadata buffer (dev = mmcblk3p4, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [ 10.234893] random: crng init done [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Root filesystem has insufficient free space; mounting tmpfs on /tmp ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...[ 11.537261] smsc911x 50000000.ethernet eth0: MAC Address: 08:00:08:1e:0f:44 Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 11.780334] SMSC LAN8700 50000000.etherne:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=50000000.etherne:01, irq=-1) [ 11.820129] smsc911x 50000000.ethernet eth0: SMSC911x/921x identified at 0xf09f0000, IRQ: 219 [ 11.828735] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:1e:0f:44 Sending on LPF/eth0/08:00:08:1e:0f:44 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 [ 14.890441] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 03:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:10]: got exception: timeout ~$off
[PYBOOT] [snowball 03:11]: Done. Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.720009] bf60: 00000000 c035d908 00000000 00000000 ffffffff ee36b300 00000000 00000000 [ 1.720017] bf80: ee70bf80 ee70bf80 00000001 00010001 ee70bf90 ee70bf90 ee02b300 ee02b300 [ 1.720023] bfa0: c035d82c 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 1.720030] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.720036] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 1.720047] [<c035dd48>] (kthread_data) from [<c0358f54>] (wq_worker_sleeping+0x8/0xd0) [ 1.720061] [<c0358f54>] (wq_worker_sleeping) from [<c0bc3ab0>] (__schedule+0x370/0x580) [ 1.720069] [<c0bc3ab0>] (__schedule) from [<c0bc3d04>] (schedule+0x44/0x9c) [ 1.720085] [<c0bc3d04>] (schedule) from [<c0344cf8>] (do_exit+0x6d4/0xa74) [ 1.720094] [<c0344cf8>] (do_exit) from [<c030bd98>] (die+0x410/0x474) [ 1.720106] [<c030bd98>] (die) from [<c031ce30>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 1.720120] [<c031ce30>] (__do_kernel_fault.part.0) from [<c0317e60>] (do_page_fault+0x36c/0x380) [ 1.720129] [<c0317e60>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 1.720138] [<c03012d8>] (do_DataAbort) from [<c030c478>] (__dabt_svc+0x58/0x80) [ 1.720141] Exception stack(0xee70be48 to 0xee70be90) [ 1.720148] be40: 00000040 000001e4 6e1e3240 0000004c 00000040 00000000 [ 1.720155] be60: 00000040 00000000 c13098d8 00000000 eefcc900 ee36b300 10624dd3 ee70be98 [ 1.720159] be80: c06adacc c0bc55a4 60000013 ffffffff [ 1.720168] [<c030c478>] (__dabt_svc) from [<c0bc55a4>] (mutex_lock+0xc/0x4c) [ 1.720178] [<c0bc55a4>] (mutex_lock) from [<c06adacc>] (regulator_disable+0x2c/0x60) [ 1.720192] [<c06adacc>] (regulator_disable) from [<c0323d3c>] (imx6q_pm_pu_power_off+0x8c/0x94) [ 1.720204] [<c0323d3c>] (imx6q_pm_pu_power_off) from [<c07baab4>] (genpd_power_off+0x3c/0xa4) [ 1.720213] [<c07baab4>] (genpd_power_off) from [<c07bc5dc>] (genpd_poweroff+0xfc/0x178) [ 1.720221] [<c07bc5dc>] (genpd_poweroff) from [<c07bc9d4>] (genpd_power_off_work_fn+0x20/0x2c) [ 1.720230] [<c07bc9d4>] (genpd_power_off_work_fn) from [<c0357cc4>] (process_one_work+0x1ec/0x414) [ 1.720239] [<c0357cc4>] (process_one_work) from [<c0358970>] (worker_thread+0x38/0x594) [ 1.720247] [<c0358970>] (worker_thread) from [<c035d908>] (kthread+0xdc/0xf4) [ 1.720257] [<c035d908>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 1.720263] Code: ebff8549 e1a00006 e8bd81f0 e59032f8 (e5130014) [ 1.720267] ---[ end trace 120bb4dc5dd565f6 ]--- [ 1.720269] Fixing recursive fault but reboot is needed! [ 1.761357] mmc2: host does not support reading read-only switch, assuming write-enable [ 1.767019] mmc2: new high speed SDHC card at address 0001
[PYBOOT] [wandboard 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 01:44]: got exception: timeout ~$off
[PYBOOT] [wandboard 01:45]: Done. Board wandboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 34.607732] df80: c0315594 600001d3 ffffffff ee1edfcc 00003ff7 c030be38 c0e606cc 00003ff7 [ 34.615912] dfa0: 600001d3 00000000 ffffffff 00003ff7 00000000 e92d4070 00003ff7 ee1ee000 [ 34.624092] dfc0: c121d2c4 00000080 29aaaaab ee1edfe8 c0315580 c0315594 600001d3 ffffffff [ 34.632272] dfe0: 00000051 c0e5fb74 00003ff7 ee1ee0f0 00000005 c031a734 00000005 c03159b0 [ 34.640449] e000: 66666666 66666666 bf000000 [ 34.644734] [<c0356e90>] (account_system_time) from [<c036f970>] (update_process_times+0x28/0x60) [ 34.653620] [<c036f970>] (update_process_times) from [<c037e84c>] (tick_sched_timer+0x5c/0xb0) [ 34.662240] [<c037e84c>] (tick_sched_timer) from [<c0370494>] (__hrtimer_run_queues.constprop.4+0x104/0x184) [ 34.672074] [<c0370494>] (__hrtimer_run_queues.constprop.4) from [<c03706a8>] (hrtimer_interrupt+0x88/0x1ac) [ 34.681908] [<c03706a8>] (hrtimer_interrupt) from [<c030de6c>] (twd_handler+0x30/0x38) [ 34.689835] [<c030de6c>] (twd_handler) from [<c0368350>] (handle_percpu_devid_irq+0x64/0xfc) [ 34.698280] [<c0368350>] (handle_percpu_devid_irq) from [<c03645d8>] (generic_handle_irq+0x24/0x34) [ 34.707331] [<c03645d8>] (generic_handle_irq) from [<c0364a6c>] (__handle_domain_irq+0x54/0xa8) [ 34.716034] [<c0364a6c>] (__handle_domain_irq) from [<c03016e0>] (gic_handle_irq+0x54/0x88) [ 34.724389] [<c03016e0>] (gic_handle_irq) from [<c030becc>] (__irq_svc+0x6c/0x90) [ 34.731872] Exception stack(0xee1eddb8 to 0xee1ede00) [ 34.736924] dda0: 00000041 00000000 [ 34.745105] ddc0: c1133980 c1133980 c121c368 00000000 600001d3 00000000 00000001 c0315598 [ 34.753285] dde0: c0315596 00000000 600001d3 ee1ede08 c03a1420 c03a1424 60000153 ffffffff [ 34.761469] [<c030becc>] (__irq_svc) from [<c03a1424>] (panic+0x1f0/0x250) [ 34.768352] [<c03a1424>] (panic) from [<c030b7b0>] (die+0x340/0x394) [ 34.774712] [<c030b7b0>] (die) from [<c031a748>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 34.782634] [<c031a748>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 34.791510] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 34.799169] [<c0301298>] (do_DataAbort) from [<c030be38>] (__dabt_svc+0x58/0x80) [ 34.806565] Exception stack(0xee1edf98 to 0xee1edfe0) [ 34.811617] df80: c0e606cc 00003ff7 [ 34.819798] dfa0: 600001d3 00000000 ffffffff 00003ff7 00000000 e92d4070 00003ff7 ee1ee000 [ 34.827978] dfc0: c121d2c4 00000080 29aaaaab ee1edfe8 c0315580 c0315594 600001d3 ffffffff [ 34.836159] [<c030be38>] (__dabt_svc) from [<c0315594>] (show_pte+0x44/0xf4) [ 34.843211] [<c0315594>] (show_pte) from [<c031a734>] (__do_kernel_fault.part.0+0x50/0x1e4) [ 34.851565] Code: e08cc002 e580c210 e0813003 e5803218 (e5d630d0) [ 34.857660] ---[ end trace c4ef3f392dd925fc ]--- [ 34.862279] Kernel panic - not syncing: Fatal exception in interrupt [ 34.868633] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [wandboard 01:01]: got exception: panic ~$off
[PYBOOT] [wandboard 01:02]: Done.