Failed boards:
cubie2 sunxi_defconfig : FAILED 1:21.14 cubie2 multi_v7_defconfig : FAILED 1:36.73 cubie2 multi_lpae_defconfig : FAILED 1:22.22 cubox multi_v7_defconfig : FAILED 1:32.95 omap5uevm omap2plus_defconfig : FAILED 1:46.45 omap5uevm multi_v7_defconfig : FAILED 1:49.62 omap5uevm multi_lpae_defconfig : FAILED 1:43.62 snowball u8500_defconfig : FAILED 1:49.01
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:16.72 arndale exynos_defconfig : passed 1:14.33 arndale multi_v7_defconfig : passed 1:31.09 arndale multi_lpae_defconfig : passed 1:18.85 bbb omap2plus_defconfig : passed 1:28.77 bbb multi_v7_defconfig : passed 1:27.16 beaver tegra_defconfig : passed 1:01.77 beaver multi_v7_defconfig : passed 1:09.92 capri bcm_defconfig : passed 0:39.97 capri multi_v7_defconfig : passed 0:40.04 cubie sunxi_defconfig : passed 1:05.00 cubie multi_v7_defconfig : passed 1:25.20 dalmore tegra_defconfig : passed 1:31.36 dalmore multi_v7_defconfig : passed 1:20.10 dalmore multi_lpae_defconfig : passed 1:21.61 hummingboard imx_v6_v7_defconfig : passed 1:31.08 hummingboard multi_v7_defconfig : passed 1:14.46 jetson tegra_defconfig : passed 1:06.80 jetson multi_v7_defconfig : passed 1:05.44 jetson multi_lpae_defconfig : passed 1:07.02 panda omap2plus_defconfig : warnings 1:36.48 panda multi_v7_defconfig : warnings 1:53.08 sama5 sama5_defconfig : passed 1:50.98 seaboard tegra_defconfig : passed 1:03.05 seaboard multi_v7_defconfig : passed 1:14.75 snow exynos_defconfig : passed 1:28.36 snow multi_v7_defconfig : passed 1:28.70 snow multi_lpae_defconfig : passed 1:23.98 snowball multi_v7_defconfig : passed 3:27.80 trimslice tegra_defconfig : passed 1:01.30 trimslice multi_v7_defconfig : passed 1:17.32 wandboard imx_v6_v7_defconfig : passed 1:14.62 wandboard multi_v7_defconfig : passed 1:09.17
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.270338] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.277844] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.283731] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.292700] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.301706] scsi0 : ahci_platform [ 1.305445] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.314145] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.319791] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.327872] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.340338] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.347402] hub 1-0:1.0: USB hub found [ 1.351243] hub 1-0:1.0: 1 port detected [ 1.356310] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.361979] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.369925] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.385317] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.392335] hub 2-0:1.0: USB hub found [ 1.396170] hub 2-0:1.0: 1 port detected [ 1.401197] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.407882] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.415766] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.480147] hub 3-0:1.0: USB hub found [ 1.483987] hub 3-0:1.0: 1 port detected [ 1.489001] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.495720] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.503560] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.565141] hub 4-0:1.0: USB hub found [ 1.568977] hub 4-0:1.0: 1 port detected [ 1.573645] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.661187] No MAC Management Counters available [ 1.665963] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.672595] IP-Config: Failed to open eth0 [ 1.676720] IP-Config: No network devices available [ 1.681635] vcc3v3: disabling [ 1.684600] vcc3v0: disabling [ 1.687692] ALSA device list: [ 1.690669] No soundcards found. [ 1.694819] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.270885] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.278388] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.284276] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.293248] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.302259] scsi0 : ahci_platform [ 1.306003] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.314727] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.320376] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.328453] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.340887] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.347952] hub 1-0:1.0: USB hub found [ 1.351805] hub 1-0:1.0: 1 port detected [ 1.356871] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.362542] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.370481] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.385867] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.392913] hub 2-0:1.0: USB hub found [ 1.396752] hub 2-0:1.0: 1 port detected [ 1.401784] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.408472] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.416353] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.480781] hub 3-0:1.0: USB hub found [ 1.484640] hub 3-0:1.0: 1 port detected [ 1.489650] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.496371] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.504218] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.565713] hub 4-0:1.0: USB hub found [ 1.569553] hub 4-0:1.0: 1 port detected [ 1.574238] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.661729] No MAC Management Counters available [ 1.666500] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.673118] IP-Config: Failed to open eth0 [ 1.677243] IP-Config: No network devices available [ 1.682157] vcc3v3: disabling [ 1.685121] vcc3v0: disabling [ 1.688218] ALSA device list: [ 1.691197] No soundcards found. [ 1.695336] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.891412] usb1-vbus: 5000 mV [ 0.894849] usb2-vbus: 5000 mV [ 0.965682] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.973168] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.979061] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.988028] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.996935] scsi0 : ahci_platform [ 1.000579] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008800] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.014395] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.022254] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045707] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052682] hub 1-0:1.0: USB hub found [ 1.056520] hub 1-0:1.0: 1 port detected [ 1.060996] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066636] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.074476] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095652] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102527] hub 2-0:1.0: USB hub found [ 1.106356] hub 2-0:1.0: 1 port detected [ 1.110794] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.117469] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.125284] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.190467] hub 3-0:1.0: USB hub found [ 1.194255] hub 3-0:1.0: 1 port detected [ 1.198751] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.205386] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.213243] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.280468] hub 4-0:1.0: USB hub found [ 1.284262] hub 4-0:1.0: 1 port detected [ 1.288614] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.375679] ata1: SATA link down (SStatus 0 SControl 300) [ 1.391994] No MAC Management Counters available [ 1.396759] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.403354] IP-Config: Failed to open eth0 [ 1.407478] IP-Config: No network devices available [ 1.412379] vcc3v3: disabling [ 1.415343] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.240605] SPEAr-ehci: EHCI SPEAr driver [ 1.244714] tegra-ehci: Tegra EHCI driver [ 1.248850] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.255031] ohci-pci: OHCI PCI platform driver [ 1.259540] ohci-platform: OHCI generic platform driver [ 1.264863] ohci-omap3: OHCI OMAP3 driver [ 1.268970] SPEAr-ohci: OHCI SPEAr driver [ 1.273715] usbcore: registered new interface driver usb-storage [ 1.281202] mousedev: PS/2 mouse device common for all mice [ 1.288175] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297492] i2c /dev entries driver [ 1.303146] usbcore: registered new interface driver uvcvideo [ 1.308901] USB Video Class driver (1.1.1) [ 1.313003] gspca_main: v2.14.0 registered [ 1.320148] orion_wdt: Initial timeout 25 sec [ 1.325635] sdhci: Secure Digital Host Controller Interface driver [ 1.331805] sdhci: Copyright(c) Pierre Ossman [ 1.336840] Synopsys Designware Multimedia Card Interface Driver [ 1.343209] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.349611] usbcore: registered new interface driver usbhid [ 1.355176] usbhid: USB HID core driver [ 1.360152] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368757] TCP: cubic registered [ 1.372113] NET: Registered protocol family 17 [ 1.376571] can: controller area network core (rev 20120528 abi 9) [ 1.382807] NET: Registered protocol family 29 [ 1.387253] can: raw protocol (rev 20120528) [ 1.391518] can: broadcast manager protocol (rev 20120528 t) [ 1.397173] can: netlink gateway (rev 20130117) max_hops=1 [ 1.403041] Key type dns_resolver registered [ 1.407517] ThumbEE CPU extension supported. [ 1.411794] Registering SWP/SWPB emulation handler [ 1.416584] PJ4 iWMMXt v2 coprocessor enabled. [ 1.422188] USB Power: 5000 mV [ 1.425759] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-06 19:11:19 UTC (1402081879) [ 1.436270] ALSA device list: [ 1.439226] No soundcards found. [ 1.443152] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.641309] can: raw protocol (rev 20120528) [ 47.641315] can: broadcast manager protocol (rev 20120528 t) [ 47.641325] can: netlink gateway (rev 20130117) max_hops=1 [ 47.641616] Key type dns_resolver registered [ 47.641712] omap_vc_init_channel: No PMIC info for vdd_core [ 47.641715] omap_vp_init: No PMIC info for vdd_core [ 47.641718] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.641720] omap_vp_init: No PMIC info for vdd_mm [ 47.641724] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.641725] omap_vp_init: No PMIC info for vdd_mpu [ 47.642032] ThumbEE CPU extension supported. [ 47.642045] Registering SWP/SWPB emulation handler [ 47.667819] palmas 0-0048: Irq flag is 0x00000000 [ 47.725051] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.731817] mmc0: new high speed MMC card at address 0001 [ 47.737706] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.742529] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.748792] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.755659] mmcblk0: unknown partition table [ 47.760652] smps123: 600 <--> 1500 mV at 1060 mV [ 47.765593] mmcblk0boot1: unknown partition table [ 47.771414] mmcblk0boot0: unknown partition table [ 47.777263] smps45: 600 <--> 1310 mV at 1030 mV [ 47.783687] smps6: 1200 mV [ 47.787709] smps7: 1800 mV [ 47.791824] smps8: 600 <--> 1310 mV at 1040 mV [ 47.797554] smps9: failed to get the current voltage [ 47.802802] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.814855] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.941915] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.086925] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.093013] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.100446] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.107300] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.115003] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.128437] ALSA device list: [ 48.131536] No soundcards found. [ 48.135546] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 48.081630] can: raw protocol (rev 20120528) [ 48.081637] can: broadcast manager protocol (rev 20120528 t) [ 48.081646] can: netlink gateway (rev 20130117) max_hops=1 [ 48.081945] Key type dns_resolver registered [ 48.082028] omap_vc_init_channel: No PMIC info for vdd_core [ 48.082031] omap_vp_init: No PMIC info for vdd_core [ 48.082034] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.082036] omap_vp_init: No PMIC info for vdd_mm [ 48.082040] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.082042] omap_vp_init: No PMIC info for vdd_mpu [ 48.082354] ThumbEE CPU extension supported. [ 48.082366] Registering SWP/SWPB emulation handler [ 48.097840] palmas 0-0048: Irq flag is 0x00000000 [ 48.165340] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.166192] mmc0: new high speed MMC card at address 0001 [ 48.166440] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.166973] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.171968] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.172549] mmcblk0: unknown partition table [ 48.173329] mmcblk0boot1: unknown partition table [ 48.174077] mmcblk0boot0: unknown partition table [ 48.210209] smps123: 600 <--> 1500 mV at 1060 mV [ 48.216311] smps45: 600 <--> 1310 mV at 1030 mV [ 48.222706] smps6: 1200 mV [ 48.226684] smps7: 1800 mV [ 48.230787] smps8: 600 <--> 1310 mV at 1040 mV [ 48.236522] smps9: failed to get the current voltage [ 48.241771] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.253821] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.382145] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.527153] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.533237] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.540661] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.547507] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.555218] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.568615] ALSA device list: [ 48.571714] No soundcards found. [ 48.575730] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.601269] Key type dns_resolver registered [ 2.601369] omap_vc_init_channel: No PMIC info for vdd_core [ 2.601372] omap_vp_init: No PMIC info for vdd_core [ 2.601382] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.601384] omap_vp_init: No PMIC info for vdd_mm [ 2.601393] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.601396] omap_vp_init: No PMIC info for vdd_mpu [ 2.601950] ThumbEE CPU extension supported. [ 2.601971] Registering SWP/SWPB emulation handler [ 2.601979] SmartReflex Class3 initialized [ 2.623660] palmas 0-0048: Irq flag is 0x00000000 [ 2.683742] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.690145] mmc0: new high speed MMC card at address 0001 [ 2.697916] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.703004] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.709449] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.719187] mmcblk0: unknown partition table [ 2.725861] mmcblk0boot1: unknown partition table [ 2.732814] mmcblk0boot0: unknown partition table [ 2.753752] smps123: 600 <--> 1500 mV at 1060 mV [ 2.760763] smps45: 600 <--> 1310 mV at 1030 mV [ 2.768148] smps6: 1200 mV [ 2.772879] smps7: 1800 mV [ 2.777815] smps8: 600 <--> 1310 mV at 1040 mV [ 2.784219] smps9: failed to get the current voltage [ 2.790173] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.804521] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.813364] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.820641] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.826698] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.835848] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.845225] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.852182] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.860672] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.869305] sr_init: No PMIC hook to init smartreflex [ 2.874781] sr_init: platform driver register failed for SR [ 2.903015] pbias_mmc_omap5: disabling [ 2.908571] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.508758] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.520690] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.528015] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.539489] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.548065] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.559997] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.567321] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.578796] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.586608] HS USB OTG: no transceiver configured [ 3.591339] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.599151] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.607086] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.619018] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.626312] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.637817] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.646392] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.658325] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.665618] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.677124] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.684936] HS USB OTG: no transceiver configured [ 3.689636] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.697479] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.705413] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.717346] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.724670] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.736145] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.744720] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.756652] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.763977] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.775451] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.783264] HS USB OTG: no transceiver configured [ 3.787963] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.795837] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.803771] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.815673] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.822998] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.834472] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.843078] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout