Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160513/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.35 bbb arm-multi_v7_defconfig : FAILED 2:09.60 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.57 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.02 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:47.13 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.46 cosmic arm-multi_v7_defconfig : FAILED 2:08.44 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:58.73 dalmore arm-multi_v7_defconfig : FAILED 1:58.72 dalmore arm-multi_lpae_defconfig : FAILED 1:53.54 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.99 omap5uevm arm-multi_v7_defconfig : FAILED 2:08.62 omap5uevm arm-multi_lpae_defconfig : FAILED 0:55.26 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:02.41 pi arm-multi_lpae_defconfig : FAILED 1:49.36 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:52.55 seaboard arm-multi_v7_defconfig : FAILED 2:04.56 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.75 snowball arm-multi_v7_defconfig : FAILED 2:07.42 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:11.42 arndale arm-exynos_defconfig : passed 1:37.52 arndale arm-multi_v7_defconfig : passed 1:35.55 arndale arm-multi_lpae_defconfig : passed 1:28.63 capri arm-bcm_defconfig : passed 1:09.90 capri arm-multi_v7_defconfig : passed 0:57.84 chitra powerpc-ppc64_defconfig : passed 2:04.52 colombus arm-sunxi_defconfig : passed 2:46.48 colombus arm-multi_v7_defconfig : passed 2:38.76 colombus arm-multi_lpae_defconfig : passed 2:30.92 cubie arm-sunxi_defconfig : passed 0:51.04 cubie arm-multi_v7_defconfig : passed 0:49.64 cubie2 arm-sunxi_defconfig : passed 0:48.10 cubie2 arm-multi_v7_defconfig : passed 0:52.56 cubie2 arm-multi_lpae_defconfig : passed 1:02.62 cubox arm-multi_v7_defconfig : passed 1:22.28 cubox arm-mvebu_v7_defconfig : passed 1:09.03 hummingboard arm-imx_v6_v7_defconfig : passed 1:39.36 hummingboard arm-multi_v7_defconfig : passed 1:19.95 jetsontk1 arm-tegra_defconfig : warnings 0:58.45 jetsontk1 arm-multi_v7_defconfig : warnings 0:56.05 jetsontk1 arm-multi_lpae_defconfig : warnings 1:10.18 omap5uevm arm-omap2plus_defconfig : passed 1:06.17 pandaes arm-omap2plus_defconfig : warnings 1:35.76 pandaes arm-multi_v7_defconfig : passed 1:49.24 pi arm-exynos_defconfig : passed 2:08.84 pit arm-exynos_defconfig : passed 2:09.48 pit arm-multi_v7_defconfig : passed 2:12.12 pit arm-multi_lpae_defconfig : passed 2:15.51 seattle arm64-defconfig : passed 2:23.69 snow arm-exynos_defconfig : passed 2:09.55 snow arm-multi_v7_defconfig : passed 2:05.34 snow arm-multi_lpae_defconfig : passed 2:04.52 trimslice arm-tegra_defconfig : warnings 1:38.45 trimslice arm-multi_v7_defconfig : warnings 2:47.33 wandboard arm-imx_v6_v7_defconfig : passed 1:07.85 wandboard arm-multi_v7_defconfig : passed 1:14.75
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.37 beaver arm-multi_v7_defconfig : OFFLINE 2:15.47 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:15.42 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:25.53 parallella arm-multi_v7_defconfig : OFFLINE 2:15.62 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.61 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.08 sama5 arm-sama5_defconfig : OFFLINE 2:23.63 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:16.76 socfpga arm-socfpga_defconfig : OFFLINE 2:20.11 socfpga arm-multi_v7_defconfig : OFFLINE 2:14.93
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.566726] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.632316] Synopsys Designware Multimedia Card Interface Driver [ 1.640106] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.649999] ledtrig-cpu: registered to indicate activity on CPUs [ 1.657239] usbcore: registered new interface driver usbhid [ 1.663166] usbhid: USB HID core driver [ 1.675087] NET: Registered protocol family 10 [ 1.681603] sit: IPv6 over IPv4 tunneling driver [ 1.687739] NET: Registered protocol family 17 [ 1.692491] can: controller area network core (rev 20120528 abi 9) [ 1.699135] NET: Registered protocol family 29 [ 1.703843] can: raw protocol (rev 20120528) [ 1.708354] can: broadcast manager protocol (rev 20120528 t) [ 1.714338] can: netlink gateway (rev 20130117) max_hops=1 [ 1.721121] Key type dns_resolver registered [ 1.725992] omap_voltage_late_init: Voltage driver support not added [ 1.732946] ThumbEE CPU extension supported. [ 1.737492] Registering SWP/SWPB emulation handler [ 1.782347] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.788784] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.796510] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.803816] mmc1: new MMC card at address 0001 [ 1.809532] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.814748] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.822723] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.830538] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.838302] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.846071] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.853407] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.859453] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.867787] hctosys: unable to open rtc device (rtc0) [ 1.880758] mmcblk1: p1 p2 [ 1.887831] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:07]: got exception: timeout ~$off
[PYBOOT] [bbb 02:09]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.050768] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.056889] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.063216] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.070091] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.079685] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.089186] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.096202] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.139443] ledtrig-cpu: registered to indicate activity on CPUs [ 2.148132] oprofile: using arm/armv7 [ 2.153094] Initializing XFRM netlink socket [ 2.158222] NET: Registered protocol family 10 [ 2.168580] sit: IPv6 over IPv4 tunneling driver [ 2.177503] NET: Registered protocol family 17 [ 2.182417] NET: Registered protocol family 15 [ 2.187632] Key type dns_resolver registered [ 2.192477] omap_voltage_late_init: Voltage driver support not added [ 2.199209] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.207677] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.217255] ThumbEE CPU extension supported. [ 2.221879] Registering SWP/SWPB emulation handler [ 2.226901] SmartReflex Class3 initialized [ 2.295060] mmc1: new MMC card at address 0001 [ 2.307807] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.317873] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.329109] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.346900] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.354384] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.362793] mmcblk1: p1 p2 [ 2.384230] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.392608] hctosys: unable to open rtc device (rtc0) [ 2.397916] sr_init: No PMIC hook to init smartreflex [ 2.403785] sr_init: platform driver register failed for SR [ 2.444415] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.170985] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.185763] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.192838] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.215293] rtc-ds1307 2-006f: SET TIME! [ 2.221034] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.227779] rtc-ds1307 2-006f: 64 bytes nvram [ 2.232391] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.240610] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.246403] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.254647] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.263808] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.270689] hub 1-0:1.0: USB hub found [ 2.274640] hub 1-0:1.0: 1 port detected [ 2.279036] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.284809] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.292914] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.301947] hub 2-0:1.0: USB hub found [ 2.305923] hub 2-0:1.0: 1 port detected [ 2.312025] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.376386] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.394570] aic_dvdd_fixed: disabling [ 2.399262] Waiting for root device /dev/mmcblk0p1... [ 2.421789] mmc1: new MMC card at address 0001 [ 2.426826] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.431745] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.438099] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.446314] mmcblk1: p1 [ 2.584799] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.741055] hub 1-1:1.0: USB hub found [ 2.745046] hub 1-1:1.0: 4 ports detected [ 2.824829] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.853049] hub 2-1:1.0: USB hub found [ 2.857035] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.175950] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.190676] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.197755] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.220289] rtc-ds1307 2-006f: SET TIME! [ 2.226013] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.232776] rtc-ds1307 2-006f: 64 bytes nvram [ 2.237391] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.245601] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.251386] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.259622] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.268793] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.275674] hub 1-0:1.0: USB hub found [ 2.279627] hub 1-0:1.0: 1 port detected [ 2.284032] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.289807] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.297914] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.306949] hub 2-0:1.0: USB hub found [ 2.310922] hub 2-0:1.0: 1 port detected [ 2.317031] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.381364] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.399586] aic_dvdd_fixed: disabling [ 2.404291] Waiting for root device /dev/mmcblk0p1... [ 2.431799] mmc1: new MMC card at address 0001 [ 2.436846] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.441751] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.448105] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.456317] mmcblk1: p1 [ 2.589801] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.746055] hub 1-1:1.0: USB hub found [ 2.750042] hub 1-1:1.0: 4 ports detected [ 2.829835] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.858049] hub 2-1:1.0: USB hub found [ 2.862034] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.258016] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.264313] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.271212] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.281610] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.286450] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.292767] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.299625] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.309220] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.318718] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.325770] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.367418] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.373716] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.380590] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.390194] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.399690] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.406732] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.412846] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.419161] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.426008] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.435604] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.445100] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.452147] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.497531] hctosys: unable to open rtc device (rtc0) [ 4.502834] sr_init: No PMIC hook to init smartreflex [ 4.508363] sr_init: platform driver register failed for SR [ 4.544002] mmc1: new MMC card at address 0001 [ 4.551031] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.554404] aic_dvdd_fixed: disabling [ 4.560017] ldousb: disabling [ 4.560473] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.561151] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.577920] mmcblk1: p1 [ 4.585945] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.427020] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.501258] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.511586] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.585814] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.596131] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.670299] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.680628] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.754864] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.765191] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.839366] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.849691] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.923919] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.934246] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.008445] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.018773] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.093201] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.103519] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.177685] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.188003] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.262221] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.272539] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.346760] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.357085] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.431298] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.441621] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.515848] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.526168] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.600337] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.610660] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.684897] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.695222] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.769391] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.779714] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.063323] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.137306] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.147385] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.221366] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.231444] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.305431] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.315513] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.389498] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.399582] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.473569] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.483669] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.557649] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.567714] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.641701] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.651775] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.725762] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.735834] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.809817] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.819885] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.893875] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.903945] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.977927] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.988006] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.061988] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.072065] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.146063] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.156143] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.230120] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.240193] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.314173] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.324254] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.398239] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.408322] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:07]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.809066] can: netlink gateway (rev 20130117) max_hops=1 [ 2.816159] Key type dns_resolver registered [ 2.822546] ThumbEE CPU extension supported. [ 2.826950] Registering SWP/SWPB emulation handler [ 2.841842] usb1_vbus: supplied by vdd-sys-5v0 [ 2.850459] usb2_vbus: supplied by vdd-sys-5v0 [ 2.869812] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.894700] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.901472] [drm] No driver support for vblank timestamp query. [ 2.914381] mmc1: new MMC card at address 0001 [ 2.921066] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.927762] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.934824] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.943342] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.955261] mmcblk1: p1 [ 3.081251] Console: switching to colour frame buffer device 240x75 [ 3.170490] drm drm: fb0: frame buffer device [ 3.186213] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.201487] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.207080] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.215849] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.231222] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.241619] hub 1-0:1.0: USB hub found [ 3.245621] hub 1-0:1.0: 1 port detected [ 3.255708] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.269263] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.332047] dvdd_ts: disabling [ 3.335145] usb1_vbus: disabling [ 3.338525] vdd_cam_1v8_reg: disabling [ 3.345784] Waiting for root device /dev/mmcblk0p1... [ 3.556223] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.539044] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.376191] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.808623] can: netlink gateway (rev 20130117) max_hops=1 [ 2.815630] Key type dns_resolver registered [ 2.822086] ThumbEE CPU extension supported. [ 2.826477] Registering SWP/SWPB emulation handler [ 2.842613] usb1_vbus: supplied by vdd-sys-5v0 [ 2.852912] usb2_vbus: supplied by vdd-sys-5v0 [ 2.871647] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.900726] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.907595] [drm] No driver support for vblank timestamp query. [ 2.937737] mmc1: new MMC card at address 0001 [ 2.946973] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.954059] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.962608] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.971081] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.981627] mmcblk1: p1 [ 3.086576] Console: switching to colour frame buffer device 240x75 [ 3.175672] drm drm: fb0: frame buffer device [ 3.201199] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.216238] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.221896] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.230627] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.246213] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.256621] hub 1-0:1.0: USB hub found [ 3.260621] hub 1-0:1.0: 1 port detected [ 3.271381] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.286030] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.348575] dvdd_ts: disabling [ 3.351832] usb1_vbus: disabling [ 3.355093] vdd_cam_1v8_reg: disabling [ 3.362489] Waiting for root device /dev/mmcblk0p1... [ 3.576518] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.554770] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.486145] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:56]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:57]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.412656] Bluetooth: RFCOMM socket layer initialized [ 5.417874] Bluetooth: RFCOMM ver 1.11 [ 5.421719] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.427188] Bluetooth: BNEP socket layer initialized [ 5.432260] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.438269] Bluetooth: HIDP socket layer initialized [ 5.444576] Key type dns_resolver registered [ 5.454016] Registering SWP/SWPB emulation handler [ 5.470776] usb1_vbus: supplied by vdd-sys-5v0 [ 5.480920] usb2_vbus: supplied by vdd-sys-5v0 [ 5.498199] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.528661] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.535448] [drm] No driver support for vblank timestamp query. [ 5.713864] Console: switching to colour frame buffer device 240x75 [ 5.801283] drm drm: fb0: frame buffer device [ 5.832454] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.841550] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.847409] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.857816] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.882456] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.896367] hub 1-0:1.0: USB hub found [ 5.900407] hub 1-0:1.0: 1 port detected [ 5.914222] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.928285] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.007853] dvdd_ts: disabling [ 6.010959] usb1_vbus: disabling [ 6.014387] vdd_cam_1v8_reg: disabling [ 6.019022] ALSA device list: [ 6.022012] #0: NVIDIA Tegra Dalmore [ 6.027831] Waiting for root device /dev/mmcblk0p1... [ 6.222444] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.256841] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.212422] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:57]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.787592] usbhid: USB HID core driver [ 1.795906] NET: Registered protocol family 10 [ 1.796565] sit: IPv6 over IPv4 tunneling driver [ 1.801572] NET: Registered protocol family 17 [ 1.804831] NET: Registered protocol family 15 [ 1.809331] Key type dns_resolver registered [ 1.813645] Registering SWP/SWPB emulation handler [ 1.821556] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.826201] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.833611] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.840768] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.847350] [drm] No driver support for vblank timestamp query. [ 1.853267] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.859622] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.864823] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.871374] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 25000000Hz, actual 22000000HZ div = 1) [ 1.880658] mmc1: new MMC card at address 0001 [ 1.885515] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.889681] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.895527] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.901398] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.907519] max98090 1-0010: MAX98090 REVID=0x43 [ 1.909410] mmcblk1: p1 p2 [ 1.916491] max98090 1-0010: use default 2.8v micbias [ 1.925505] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.928930] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.966130] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.982713] VDD10_HDMI_1.0V: disabling [ 1.983400] vdd_g3d: disabling [ 1.984476] BUCK8_2.8V: disabling [ 1.988426] ALSA device list: [ 1.990104] #0: Odroid-U3 [ 1.993752] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:51]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.219576] [<c030c4a0>] (__dabt_svc) from [<c0364190>] (try_to_wake_up+0x13c/0x2ac) [ 2.219582] [<c0364190>] (try_to_wake_up) from [<c0385c30>] (handle_irq_event_percpu+0x74/0x14c) [ 2.219586] [<c0385c30>] (handle_irq_event_percpu) from [<c0385d4c>] (handle_irq_event+0x44/0x68) [ 2.219591] [<c0385d4c>] (handle_irq_event) from [<c0388f80>] (handle_fasteoi_irq+0xb4/0x194) [ 2.219597] [<c0388f80>] (handle_fasteoi_irq) from [<c03852ac>] (generic_handle_irq+0x24/0x34) [ 2.219601] [<c03852ac>] (generic_handle_irq) from [<c038555c>] (__handle_domain_irq+0x5c/0xb4) [ 2.219605] [<c038555c>] (__handle_domain_irq) from [<c03017a0>] (gic_handle_irq+0x54/0x98) [ 2.219609] [<c03017a0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.219611] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.219614] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.219618] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e728 c1302510 [ 2.219621] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff [ 2.219627] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.219633] [<c0308780>] (arch_cpu_idle) from [<c03791e0>] (cpu_startup_entry+0x1bc/0x218) [ 2.219641] [<c03791e0>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.219646] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.219651] Code: 3afffff6 e8bd8070 e30f3e44 e34c3133 (e593200c) [ 2.219656] ---[ end trace 7445fc666ad5d45c ]--- [ 2.219658] Kernel panic - not syncing: Fatal exception in interrupt [ 2.219663] CPU1: stopping [ 2.219667] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.6.0-rc7-next-20160513 #1 [ 2.219669] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.219678] [<c031038c>] (unwind_backtrace) from [<c030b9b0>] (show_stack+0x10/0x14) [ 2.219686] [<c030b9b0>] (show_stack) from [<c0592054>] (dump_stack+0x88/0x9c) [ 2.219693] [<c0592054>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 2.219698] [<c030eb3c>] (handle_IPI) from [<c03017e0>] (gic_handle_irq+0x94/0x98) [ 2.219702] [<c03017e0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.219704] Exception stack(0xee099f88 to 0xee099fd0) [ 2.219708] 9f80: 00000001 00000000 ea000013 f0880000 ee098000 c13024a4 [ 2.219713] 9fa0: 00000000 00000000 c1214580 c1302508 c140e728 c1302510 2ddc3000 ee099fd8 [ 2.219716] 9fc0: c032b054 c0308780 a0000013 ffffffff [ 2.219722] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.219728] [<c0308780>] (arch_cpu_idle) from [<c03791e0>] (cpu_startup_entry+0x1bc/0x218) [ 2.219733] [<c03791e0>] (cpu_startup_entry) from [<80301c8c>] (0x80301c8c) [ 3.095887] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:52]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:53]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.933026] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.948463] SMPS6: supplied by vsys_cobra [ 1.953015] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.959716] mmc0: new MMC card at address 0001 [ 1.964736] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.969647] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.975984] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.982370] SMPS7: supplied by vsys_cobra [ 1.987332] vdds_1v8_main: supplied by smps7 [ 1.992701] SMPS8: supplied by vsys_cobra [ 1.998385] SMPS9: supplied by vsys_cobra [ 2.002901] smps9: Bringing 0uV into 2100000-2100000uV [ 2.010885] LDO1: supplied by vsys_cobra [ 2.015314] ldo1: Bringing 0uV into 1800000-1800000uV [ 2.021715] LDO2: supplied by vsys_cobra [ 2.022343] smsc95xx v1.0.4 [ 2.029066] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.035465] LDO3: supplied by vdds_1v8_main [ 2.041454] LDO4: supplied by vdds_1v8_main [ 2.046163] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.052524] LDO5: supplied by vsys_cobra [ 2.058287] LDO6: supplied by vdds_1v8_main [ 2.065787] LDO7: supplied by vsys_cobra [ 2.070208] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.073979] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 42:ba:cd:d5:8d:76 [ 2.088271] LDO8: supplied by vsys_cobra [ 2.094004] LDO9: supplied by vmmcsd_fixed [ 2.100083] LDOLN: supplied by vsys_cobra [ 2.105921] LDOUSB: supplied by vsys_cobra [ 2.114825] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.140214] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.147897] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.155795] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.539243] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545596] isl29018 7-0044: Failed to read 1: -6 [ 1.550180] isl29018 7-0044: regmap initialization fails: -6 [ 1.561137] NET: Registered protocol family 10 [ 1.565576] sit: IPv6 over IPv4 tunneling driver [ 1.569155] NET: Registered protocol family 17 [ 1.573156] can: controller area network core (rev 20120528 abi 9) [ 1.579346] NET: Registered protocol family 29 [ 1.583734] can: raw protocol (rev 20120528) [ 1.587984] can: broadcast manager protocol (rev 20120528 t) [ 1.593626] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599354] Key type dns_resolver registered [ 1.603680] ThumbEE CPU extension supported. [ 1.607594] Registering SWP/SWPB emulation handler [ 1.617535] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.623015] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629384] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634758] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644852] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655218] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660666] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670854] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.677033] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682412] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.692133] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714491] Waiting for root device /dev/mmcblk0p1... [ 1.718378] mmc0: tuning execution failed: -5 [ 1.722434] mmc0: error -5 whilst initialising MMC card [ 2.584036] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598231] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603687] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.610060] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615445] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:47]: got exception: timeout ~$off
[PYBOOT] [pi 01:48]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.538659] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545010] isl29018 7-0044: Failed to read 1: -6 [ 1.549595] isl29018 7-0044: regmap initialization fails: -6 [ 1.560512] NET: Registered protocol family 10 [ 1.564947] sit: IPv6 over IPv4 tunneling driver [ 1.568521] NET: Registered protocol family 17 [ 1.572527] can: controller area network core (rev 20120528 abi 9) [ 1.578718] NET: Registered protocol family 29 [ 1.583105] can: raw protocol (rev 20120528) [ 1.587355] can: broadcast manager protocol (rev 20120528 t) [ 1.592997] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598722] Key type dns_resolver registered [ 1.603055] ThumbEE CPU extension supported. [ 1.606965] Registering SWP/SWPB emulation handler [ 1.616879] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622363] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628728] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634104] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644191] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654534] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.659977] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670162] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676344] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681722] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691461] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.713672] Waiting for root device /dev/mmcblk0p1... [ 1.717546] mmc0: tuning execution failed: -5 [ 1.721607] mmc0: error -5 whilst initialising MMC card [ 2.583439] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597598] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603058] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609432] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614816] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:58]: got exception: timeout ~$off
[PYBOOT] [pi 01:59]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.799458] Registering SWP/SWPB emulation handler [ 1.803194] VDDIO_HDMI: supplied by vdd_5v0 [ 1.804638] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.809715] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.809736] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.809757] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.809971] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.821703] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.822282] hub 3-0:1.0: USB hub found [ 1.822315] hub 3-0:1.0: 1 port detected [ 1.825831] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.825833] [drm] No driver support for vblank timestamp query. [ 1.870215] mmc2: new MMC card at address 0001 [ 1.870548] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.870683] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.870809] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.873105] mmcblk2: p3 [ 2.000422] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.008359] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.011229] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.018557] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.042745] Console: switching to colour frame buffer device 170x48 [ 2.088335] drm drm: fb0: frame buffer device [ 2.102817] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.108365] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.117881] mmc0: new SDIO card at address 0001 [ 2.123621] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.130722] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.144930] vdd_1v5: disabling [ 2.148020] vdd_1v2: disabling [ 2.151994] Waiting for root device /dev/mmcblk0p3... [ 2.991008] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 57.653888] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:02]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:03]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.335174] can: raw protocol (rev 20120528) [ 4.339448] can: broadcast manager protocol (rev 20120528 t) [ 4.345205] can: netlink gateway (rev 20130117) max_hops=1 [ 4.380610] Bluetooth: RFCOMM socket layer initialized [ 4.385800] Bluetooth: RFCOMM ver 1.11 [ 4.389583] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.395141] Bluetooth: BNEP socket layer initialized [ 4.400326] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.406471] Bluetooth: HIDP socket layer initialized [ 4.412774] Key type dns_resolver registered [ 4.419215] Registering SWP/SWPB emulation handler [ 4.449493] VDDIO_HDMI: supplied by vdd_5v0 [ 4.457683] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.471940] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.477417] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.485659] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.510226] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.519900] hub 3-0:1.0: USB hub found [ 4.523778] hub 3-0:1.0: 1 port detected [ 4.538388] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.545046] [drm] No driver support for vblank timestamp query. [ 4.688524] Console: switching to colour frame buffer device 170x48 [ 4.717292] drm drm: fb0: frame buffer device [ 4.738807] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.750215] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.758287] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.766521] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.810026] vdd_1v5: disabling [ 4.813109] vdd_1v2: disabling [ 4.816273] ALSA device list: [ 4.819234] #0: NVIDIA Tegra Seaboard [ 4.823894] Waiting for root device /dev/mmcblk0p3... [ 75.473944] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:52]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.944946] usbcore: registered new interface driver usbhid [ 1.950653] usbhid: USB HID core driver [ 1.975280] NET: Registered protocol family 10 [ 1.983947] sit: IPv6 over IPv4 tunneling driver [ 1.989227] NET: Registered protocol family 17 [ 1.993682] can: controller area network core (rev 20120528 abi 9) [ 1.999938] NET: Registered protocol family 29 [ 2.004394] can: raw protocol (rev 20120528) [ 2.008666] can: broadcast manager protocol (rev 20120528 t) [ 2.014343] can: netlink gateway (rev 20130117) max_hops=1 [ 2.020385] Key type dns_resolver registered [ 2.024841] ThumbEE CPU extension supported. [ 2.029144] Registering SWP/SWPB emulation handler [ 2.029602] mmc3: new MMC card at address 0001 [ 2.034149] mmcblk3: mmc3:0001 3.53 GiB [ 2.034362] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.034515] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.034667] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.044708] mmcblk3: p1 p2 p3 p4 [ 2.064147] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.070892] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.080078] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.087066] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.094055] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.101043] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.114349] db8500-esram12: disabling [ 2.118286] db8500-esram34: disabling [ 2.122039] en-3v3-fixed-supply: disabling [ 2.126342] V-CSI/DSI: disabling [ 2.129638] mmci-reg: disabling [ 2.133270] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.139251] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.145538] Waiting for root device /dev/mmcblk0p4...
[PYBOOT] [snowball 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:05]: got exception: timeout ~$off
[PYBOOT] [snowball 02:06]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.668151] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.678894] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.688842] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.699554] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.722656] NET: Registered protocol family 10 [ 2.738067] sit: IPv6 over IPv4 tunneling driver [ 2.743957] NET: Registered protocol family 17 [ 2.748474] NET: Registered protocol family 35 [ 2.753051] NET: Registered protocol family 37 [ 2.757598] Registering SWP/SWPB emulation handler [ 2.774536] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.786926] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-24 02:51:18 UTC (956544678) [ 2.796173] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.803192] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.810180] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.817230] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.830841] db8500-esram12: disabling [ 2.834594] db8500-esram34: disabling [ 2.838317] en-3v3-fixed-supply: disabling [ 2.842651] V-CSI/DSI: disabling [ 2.845916] mmci-reg: disabling [ 2.849212] ALSA device list: [ 2.852172] #0: MOP500-card [ 2.855468] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.861450] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.867645] Waiting for root device /dev/mmcblk0p4... [ 67.110717] random: nonblocking pool is initialized Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:53]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done.