Failed boards:
cubie2 sunxi_defconfig : FAILED 1:24.32 cubie2 multi_v7_defconfig : FAILED 1:37.64 cubie2 multi_lpae_defconfig : FAILED 1:24.68 cubox multi_v7_defconfig : FAILED 1:33.75 omap5uevm omap2plus_defconfig : FAILED 1:46.87 omap5uevm multi_v7_defconfig : FAILED 1:53.68 omap5uevm multi_lpae_defconfig : FAILED 1:44.81 snowball u8500_defconfig : FAILED 1:57.99
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:11.25 arndale exynos_defconfig : passed 1:11.93 arndale multi_v7_defconfig : passed 1:30.37 arndale multi_lpae_defconfig : passed 1:19.64 bbb omap2plus_defconfig : passed 1:33.41 bbb multi_v7_defconfig : passed 1:21.35 beaver tegra_defconfig : passed 1:04.03 beaver multi_v7_defconfig : passed 1:19.30 capri bcm_defconfig : passed 0:39.50 capri multi_v7_defconfig : passed 0:42.80 cubie sunxi_defconfig : passed 1:24.63 cubie multi_v7_defconfig : passed 1:46.70 dalmore tegra_defconfig : passed 1:22.21 dalmore multi_v7_defconfig : passed 1:20.73 dalmore multi_lpae_defconfig : passed 1:37.53 hummingboard imx_v6_v7_defconfig : passed 1:24.76 hummingboard multi_v7_defconfig : passed 1:16.33 jetson tegra_defconfig : passed 0:57.39 jetson multi_v7_defconfig : passed 0:59.50 jetson multi_lpae_defconfig : passed 1:10.38 panda omap2plus_defconfig : passed 1:26.56 panda multi_v7_defconfig : passed 1:47.73 sama5 sama5_defconfig : passed 1:56.05 seaboard multi_v7_defconfig : passed 1:20.20 snow exynos_defconfig : passed 1:28.65 snow multi_v7_defconfig : passed 1:28.89 snow multi_lpae_defconfig : passed 1:29.40 snowball multi_v7_defconfig : passed 3:36.53 trimslice tegra_defconfig : passed 1:09.80 trimslice multi_v7_defconfig : passed 1:05.25 wandboard imx_v6_v7_defconfig : passed 1:12.07 wandboard multi_v7_defconfig : passed 1:04.50
Offline boards:
seaboard tegra_defconfig : OFFLINE 1:46.32
Board legend is available at http://arm-soc.lixom.net/boards.html
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.263875] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.271378] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.277272] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.286240] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.295260] scsi0 : ahci_platform [ 1.298995] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.307701] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.313346] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.321423] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.333877] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.340958] hub 1-0:1.0: USB hub found [ 1.344806] hub 1-0:1.0: 1 port detected [ 1.349869] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.355539] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.363480] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.378864] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.385909] hub 2-0:1.0: USB hub found [ 1.389749] hub 2-0:1.0: 1 port detected [ 1.394781] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.401464] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.409353] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.473722] hub 3-0:1.0: USB hub found [ 1.477560] hub 3-0:1.0: 1 port detected [ 1.482560] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.489283] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.497128] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.558679] hub 4-0:1.0: USB hub found [ 1.562524] hub 4-0:1.0: 1 port detected [ 1.567171] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.654727] No MAC Management Counters available [ 1.659502] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.666123] IP-Config: Failed to open eth0 [ 1.670254] IP-Config: No network devices available [ 1.675145] vcc3v3: disabling [ 1.678110] vcc3v0: disabling [ 1.681175] ALSA device list: [ 1.684151] No soundcards found. [ 1.688305] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.258189] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.265692] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.271580] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.280547] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.289537] scsi0 : ahci_platform [ 1.293252] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.301967] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.307611] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.315685] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.328187] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.335227] hub 1-0:1.0: USB hub found [ 1.339085] hub 1-0:1.0: 1 port detected [ 1.344137] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.349807] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.357747] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.373170] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.380190] hub 2-0:1.0: USB hub found [ 1.384025] hub 2-0:1.0: 1 port detected [ 1.389034] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.395720] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.403601] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.468058] hub 3-0:1.0: USB hub found [ 1.471909] hub 3-0:1.0: 1 port detected [ 1.476910] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.483633] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.491468] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.552989] hub 4-0:1.0: USB hub found [ 1.556832] hub 4-0:1.0: 1 port detected [ 1.561471] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:18 UTC (18) [ 1.649032] No MAC Management Counters available [ 1.653805] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.660417] IP-Config: Failed to open eth0 [ 1.664538] IP-Config: No network devices available [ 1.669427] vcc3v3: disabling [ 1.672392] vcc3v0: disabling [ 1.675467] ALSA device list: [ 1.678447] No soundcards found. [ 1.682589] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.890289] usb1-vbus: 5000 mV [ 0.893732] usb2-vbus: 5000 mV [ 0.965201] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.972688] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.978580] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.987550] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.996456] scsi0 : ahci_platform [ 1.000108] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008322] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.013907] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.021761] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045221] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052191] hub 1-0:1.0: USB hub found [ 1.056035] hub 1-0:1.0: 1 port detected [ 1.060508] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066150] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.073993] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095166] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102036] hub 2-0:1.0: USB hub found [ 1.105866] hub 2-0:1.0: 1 port detected [ 1.110300] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.116972] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.124785] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.189966] hub 3-0:1.0: USB hub found [ 1.193753] hub 3-0:1.0: 1 port detected [ 1.198254] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.204889] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.212748] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.279982] hub 4-0:1.0: USB hub found [ 1.283776] hub 4-0:1.0: 1 port detected [ 1.288121] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.375194] ata1: SATA link down (SStatus 0 SControl 300) [ 1.391502] No MAC Management Counters available [ 1.396269] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.402864] IP-Config: Failed to open eth0 [ 1.406990] IP-Config: No network devices available [ 1.411871] vcc3v3: disabling [ 1.414835] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.233366] SPEAr-ehci: EHCI SPEAr driver [ 1.237462] tegra-ehci: Tegra EHCI driver [ 1.241581] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.247757] ohci-pci: OHCI PCI platform driver [ 1.252253] ohci-platform: OHCI generic platform driver [ 1.257557] ohci-omap3: OHCI OMAP3 driver [ 1.261648] SPEAr-ohci: OHCI SPEAr driver [ 1.266355] usbcore: registered new interface driver usb-storage [ 1.273740] mousedev: PS/2 mouse device common for all mice [ 1.280617] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.289858] i2c /dev entries driver [ 1.295432] usbcore: registered new interface driver uvcvideo [ 1.301183] USB Video Class driver (1.1.1) [ 1.305270] gspca_main: v2.14.0 registered [ 1.312333] orion_wdt: Initial timeout 25 sec [ 1.317673] sdhci: Secure Digital Host Controller Interface driver [ 1.323845] sdhci: Copyright(c) Pierre Ossman [ 1.328824] Synopsys Designware Multimedia Card Interface Driver [ 1.335163] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.341507] usbcore: registered new interface driver usbhid [ 1.347070] usbhid: USB HID core driver [ 1.351907] ata1: SATA link down (SStatus 0 SControl F300) [ 1.360308] TCP: cubic registered [ 1.363651] NET: Registered protocol family 17 [ 1.368106] can: controller area network core (rev 20120528 abi 9) [ 1.374336] NET: Registered protocol family 29 [ 1.378769] can: raw protocol (rev 20120528) [ 1.383014] can: broadcast manager protocol (rev 20120528 t) [ 1.388666] can: netlink gateway (rev 20130117) max_hops=1 [ 1.394517] Key type dns_resolver registered [ 1.398964] ThumbEE CPU extension supported. [ 1.403240] Registering SWP/SWPB emulation handler [ 1.408011] PJ4 iWMMXt v2 coprocessor enabled. [ 1.413522] USB Power: 5000 mV [ 1.417020] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-04 22:46:50 UTC (1401922010) [ 1.427471] ALSA device list: [ 1.430442] No soundcards found. [ 1.434371] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.642777] can: raw protocol (rev 20120528) [ 47.642780] can: broadcast manager protocol (rev 20120528 t) [ 47.642787] can: netlink gateway (rev 20130117) max_hops=1 [ 47.643081] Key type dns_resolver registered [ 47.643157] omap_vc_init_channel: No PMIC info for vdd_core [ 47.643159] omap_vp_init: No PMIC info for vdd_core [ 47.643162] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.643164] omap_vp_init: No PMIC info for vdd_mm [ 47.643168] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.643170] omap_vp_init: No PMIC info for vdd_mpu [ 47.643468] ThumbEE CPU extension supported. [ 47.643478] Registering SWP/SWPB emulation handler [ 47.714839] palmas 0-0048: Irq flag is 0x00000000 [ 47.720988] mmc0: new high speed MMC card at address 0001 [ 47.726862] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.731674] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.737980] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.744872] mmcblk0: unknown partition table [ 47.750222] mmcblk0boot1: unknown partition table [ 47.755988] mmcblk0boot0: unknown partition table [ 47.761021] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.768726] smps123: 600 <--> 1500 mV at 1060 mV [ 47.774887] smps45: 600 <--> 1310 mV at 1030 mV [ 47.781339] smps6: 1200 mV [ 47.785299] smps7: 1800 mV [ 47.789405] smps8: 600 <--> 1310 mV at 1040 mV [ 47.795141] smps9: failed to get the current voltage [ 47.800393] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.812439] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.937131] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.082139] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.088217] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.095668] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.102524] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.110218] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.123618] ALSA device list: [ 48.126719] No soundcards found. [ 48.130728] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 48.080629] can: raw protocol (rev 20120528) [ 48.080632] can: broadcast manager protocol (rev 20120528 t) [ 48.080639] can: netlink gateway (rev 20130117) max_hops=1 [ 48.080914] Key type dns_resolver registered [ 48.080981] omap_vc_init_channel: No PMIC info for vdd_core [ 48.080984] omap_vp_init: No PMIC info for vdd_core [ 48.080988] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.080990] omap_vp_init: No PMIC info for vdd_mm [ 48.080994] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.080995] omap_vp_init: No PMIC info for vdd_mpu [ 48.081293] ThumbEE CPU extension supported. [ 48.081303] Registering SWP/SWPB emulation handler [ 48.152340] palmas 0-0048: Irq flag is 0x00000000 [ 48.158731] mmc0: new high speed MMC card at address 0001 [ 48.164619] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.169436] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.175714] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.182567] mmcblk0: unknown partition table [ 48.187916] mmcblk0boot1: unknown partition table [ 48.193096] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.198917] mmcblk0boot0: unknown partition table [ 48.205127] smps123: 600 <--> 1500 mV at 1060 mV [ 48.211343] smps45: 600 <--> 1310 mV at 1030 mV [ 48.217795] smps6: 1200 mV [ 48.221793] smps7: 1800 mV [ 48.225897] smps8: 600 <--> 1310 mV at 1040 mV [ 48.231622] smps9: failed to get the current voltage [ 48.236866] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.248912] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.375069] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.382187] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.388262] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.395692] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.402540] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.410222] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.423568] ALSA device list: [ 48.426676] No soundcards found. [ 48.430670] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.560193] NET: Registered protocol family 15 [ 2.560356] Key type dns_resolver registered [ 2.560447] omap_vc_init_channel: No PMIC info for vdd_core [ 2.560450] omap_vp_init: No PMIC info for vdd_core [ 2.560458] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.560460] omap_vp_init: No PMIC info for vdd_mm [ 2.560468] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.560470] omap_vp_init: No PMIC info for vdd_mpu [ 2.561009] ThumbEE CPU extension supported. [ 2.561026] Registering SWP/SWPB emulation handler [ 2.561030] SmartReflex Class3 initialized [ 2.664299] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.668059] palmas 0-0048: Irq flag is 0x00000000 [ 2.674404] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.680833] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.689814] mmcblk0: unknown partition table [ 2.695568] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.698034] mmcblk0boot1: unknown partition table [ 2.707483] mmcblk0boot0: unknown partition table [ 2.750436] smps123: 600 <--> 1500 mV at 1060 mV [ 2.757447] smps45: 600 <--> 1310 mV at 1030 mV [ 2.764641] smps6: 1200 mV [ 2.769372] smps7: 1800 mV [ 2.774246] smps8: 600 <--> 1310 mV at 1040 mV [ 2.780717] smps9: failed to get the current voltage [ 2.786657] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.800953] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.809811] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.816750] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.822905] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.832012] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.841356] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.848305] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.856789] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.865459] sr_init: No PMIC hook to init smartreflex [ 2.870979] sr_init: platform driver register failed for SR [ 2.899091] pbias_mmc_omap5: disabling [ 2.904564] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.597869] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.605804] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.617736] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.625030] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.636535] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.645019] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.656951] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.664276] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675750] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.683563] HS USB OTG: no transceiver configured [ 3.688293] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.696136] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.704071] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.716003] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.723297] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.734771] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.743316] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.755249] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.762542] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774017] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.781829] HS USB OTG: no transceiver configured [ 3.786560] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.794403] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.802337] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.814239] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.821563] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.833038] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.841583] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.853515] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.860839] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872314] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.880126] HS USB OTG: no transceiver configured [ 3.884857] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.892700] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.900604] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.912536] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.919830] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.931335] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout