Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v3.16-rc1-22-g6d43925/
Failed boards:
capri bcm_defconfig : FAILED 1:23.86 omap5uevm omap2plus_defconfig : FAILED 1:46.59 omap5uevm multi_v7_defconfig : FAILED 1:47.42 omap5uevm multi_lpae_defconfig : FAILED 1:43.98 snow multi_v7_defconfig : FAILED 1:13.21 snow multi_lpae_defconfig : FAILED 1:13.73 snowball u8500_defconfig : FAILED 1:54.26
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:19.65 arndale exynos_defconfig : passed 1:15.73 arndale multi_v7_defconfig : passed 1:42.48 arndale multi_lpae_defconfig : passed 1:23.21 bbb omap2plus_defconfig : passed 1:33.49 bbb multi_v7_defconfig : passed 1:27.23 beaver tegra_defconfig : passed 1:04.47 beaver multi_v7_defconfig : passed 1:06.97 capri multi_v7_defconfig : passed 0:40.80 cubie sunxi_defconfig : passed 1:13.69 cubie multi_v7_defconfig : passed 1:24.00 cubie2 sunxi_defconfig : passed 1:21.35 cubie2 multi_v7_defconfig : passed 1:47.17 cubie2 multi_lpae_defconfig : passed 1:19.81 cubox multi_v7_defconfig : passed 1:14.41 dalmore tegra_defconfig : passed 1:24.94 dalmore multi_v7_defconfig : passed 1:19.93 dalmore multi_lpae_defconfig : passed 1:16.98 hummingboard imx_v6_v7_defconfig : passed 1:24.54 hummingboard multi_v7_defconfig : passed 1:14.68 jetson tegra_defconfig : passed 1:03.77 jetson multi_v7_defconfig : passed 1:06.74 jetson multi_lpae_defconfig : passed 1:00.32 panda omap2plus_defconfig : warnings 1:36.67 panda multi_v7_defconfig : warnings 1:44.72 sama5 sama5_defconfig : warnings 1:51.29 seaboard tegra_defconfig : passed 1:08.33 seaboard multi_v7_defconfig : passed 1:12.31 snow exynos_defconfig : passed 1:31.24 snowball multi_v7_defconfig : passed 4:08.54 trimslice tegra_defconfig : passed 1:07.16 trimslice multi_v7_defconfig : passed 1:05.62 wandboard imx_v6_v7_defconfig : passed 1:07.36 wandboard multi_v7_defconfig : passed 1:17.52
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board capri-bcm_defconfig failure log: -------------------------------------------------
[ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1200 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.092963] NET: Registered protocol family 17 [ 47.092991] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.102063] mmcblk0: unknown partition table [ 47.102847] mmcblk0boot1: unknown partition table [ 47.103601] mmcblk0boot0: unknown partition table [ 47.118360] can: controller area network core (rev 20120528 abi 9) [ 47.124866] NET: Registered protocol family 29 [ 47.129514] can: raw protocol (rev 20120528) [ 47.133984] can: broadcast manager protocol (rev 20120528 t) [ 47.139904] can: netlink gateway (rev 20130117) max_hops=1 [ 47.145906] Key type dns_resolver registered [ 47.150437] omap_vc_init_channel: No PMIC info for vdd_core [ 47.156262] omap_vp_init: No PMIC info for vdd_core [ 47.161361] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.167003] omap_vp_init: No PMIC info for vdd_mm [ 47.171920] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.177650] omap_vp_init: No PMIC info for vdd_mpu [ 47.182934] ThumbEE CPU extension supported. [ 47.187405] Registering SWP/SWPB emulation handler [ 47.193620] palmas 0-0048: Irq flag is 0x00000000 [ 47.201337] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.208871] smps123: 600 <--> 1500 mV at 1060 mV [ 47.215012] smps45: 600 <--> 1310 mV at 1030 mV [ 47.221422] smps6: 1200 mV [ 47.225420] smps7: 1800 mV [ 47.229522] smps8: 600 <--> 1310 mV at 1040 mV [ 47.235260] smps9: failed to get the current voltage [ 47.240508] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.252555] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.381706] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.526713] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.532792] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.540241] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.547097] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.554806] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.568302] ALSA device list: [ 47.571401] No soundcards found. [ 47.575406] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.538046] NET: Registered protocol family 17 [ 47.538073] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.547216] mmcblk0: unknown partition table [ 47.547992] mmcblk0boot1: unknown partition table [ 47.548758] mmcblk0boot0: unknown partition table [ 47.563421] can: controller area network core (rev 20120528 abi 9) [ 47.569916] NET: Registered protocol family 29 [ 47.574556] can: raw protocol (rev 20120528) [ 47.579024] can: broadcast manager protocol (rev 20120528 t) [ 47.584944] can: netlink gateway (rev 20130117) max_hops=1 [ 47.590955] Key type dns_resolver registered [ 47.595491] omap_vc_init_channel: No PMIC info for vdd_core [ 47.601317] omap_vp_init: No PMIC info for vdd_core [ 47.606417] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.612058] omap_vp_init: No PMIC info for vdd_mm [ 47.616972] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.622704] omap_vp_init: No PMIC info for vdd_mpu [ 47.627988] ThumbEE CPU extension supported. [ 47.632459] Registering SWP/SWPB emulation handler [ 47.638687] palmas 0-0048: Irq flag is 0x00000000 [ 47.646375] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.653929] smps123: 600 <--> 1500 mV at 1060 mV [ 47.660049] smps45: 600 <--> 1310 mV at 1030 mV [ 47.666467] smps6: 1200 mV [ 47.670456] smps7: 1800 mV [ 47.674606] smps8: 600 <--> 1310 mV at 1040 mV [ 47.680344] smps9: failed to get the current voltage [ 47.685595] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.697648] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.826852] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.971863] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.977944] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.985380] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.992233] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.999950] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.013351] ALSA device list: [ 48.016442] No soundcards found. [ 48.020434] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 1.951632] Key type dns_resolver registered [ 1.951731] omap_vc_init_channel: No PMIC info for vdd_core [ 1.951734] omap_vp_init: No PMIC info for vdd_core [ 1.951744] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.951747] omap_vp_init: No PMIC info for vdd_mm [ 1.951756] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.951759] omap_vp_init: No PMIC info for vdd_mpu [ 1.952316] ThumbEE CPU extension supported. [ 1.952342] Registering SWP/SWPB emulation handler [ 1.952354] SmartReflex Class3 initialized [ 1.963759] palmas 0-0048: Irq flag is 0x00000000 [ 2.034144] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.034399] mmc0: new high speed MMC card at address 0001 [ 2.040142] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.040382] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.040606] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.043494] mmcblk0: unknown partition table [ 2.045467] mmcblk0boot1: unknown partition table [ 2.047330] mmcblk0boot0: unknown partition table [ 2.123684] smps123: 600 <--> 1500 mV at 1060 mV [ 2.130726] smps45: 600 <--> 1310 mV at 1030 mV [ 2.138040] smps6: 1200 mV [ 2.142771] smps7: 1800 mV [ 2.147716] smps8: 600 <--> 1310 mV at 1040 mV [ 2.154204] smps9: failed to get the current voltage [ 2.160153] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.174509] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.183348] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191375] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.197483] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.206620] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.216003] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.222994] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.231590] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.240270] sr_init: No PMIC hook to init smartreflex [ 2.245728] sr_init: platform driver register failed for SR [ 2.274041] pbias_mmc_omap5: disabling [ 2.279586] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_lpae_defconfig failure log: -------------------------------------------------
1,964,733 5,440 main_loop 3,157,259 1,192,526 usb_start 6,099,355 2,942,096 tftp_start 6,099,372 17 id=80 6,099,374 2 eth_start 21,165,376 15,066,002 id=81 21,165,461 85 id=82 21,165,466 5 id=84 21,165,467 1 tftp_done 25,316,872 4,151,405 bootm_start 25,316,880 8 id=1 25,396,652 79,772 id=2 25,396,671 19 id=3 26,422,513 1,025,842 id=4 26,422,515 2 id=5 26,422,526 11 id=6 27,466,678 1,044,152 id=7 27,466,682 4 id=8 27,466,696 14 id=15 28,063,196 596,500 start_kernel
Accumulated time: 153,730 lcd Stashed 27 records [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.16.0-rc1-00022-g6d43925 (build@brutus) (gcc version 4.8.1 (GCC) ) #1 SMP Sat Jun 21 13:09:15 PDT 2014 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Google Snow [ 0.000000] cma: CMA: reserved 64 MiB at 6b800000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 523264 [ 0.000000] free_area_init_node: node 0, pgdat c0c69ac0, node_mem_map ea7d4000 [ 0.000000] DMA zone: 1520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2568 pages used for memmap [ ~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0add384 (9045 kB) [ 0.000000] .init : 0xc0ade000 - 0xc0b83100 ( 661 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c62dc0 ( 892 kB) [ 0.000000] .bss : 0xc0c62dc8 - 0xc0caee08 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.654465] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.655014] Console: colour dummy device 80x30 [ 2889.655025] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.655032] pid_max: default: 32768 minimum: 301 [ 2889.655093] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.655098] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.655368] CPU: Testing write buffer coherency: ok [ 2889.655479] CPU0: update cpu_capacity 1024 [ 2889.655485] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.655581] Setting up static identity map for 0x4081c2c0 - 0x4081c358 [ 2889.656696] CPU1: Booted secondary processor [ 2889.656730] CPU1: update cpu_capacity 1024 [ 2889.656733] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.656776] Brought up 2 CPUs [ 2889.656785] SMP: Total of 2 processors activated. [ 2889.656788] CPU: All CPU(s) started in HYP mode. [ 2889.656792] CPU: Virtualization extensions available. [ 2889.657032] devtmpfs: initialized [ 2889.658938] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.659125] pinctrl core: initialized pinctrl subsystem [ 2889.659327] regulator-dummy: no parameters [ 2889.665219] NET: Registered ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.536651] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.548583] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.555908] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.567382] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.575897] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.587799] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.595123] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.606597] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.614440] HS USB OTG: no transceiver configured [ 3.619140] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.626983] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.634918] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.646820] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654144] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665618] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674133] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686065] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693389] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.704864] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712677] HS USB OTG: no transceiver configured [ 3.717376] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725250] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733154] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745086] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752410] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.763885] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772369] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784301] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791625] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803100] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.810913] HS USB OTG: no transceiver configured [ 3.815612] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823486] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831390] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843322] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850616] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862121] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870635] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout