Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-3695-gf61a657/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.31 bbb arm-multi_v7_defconfig : FAILED 1:56.57 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.31 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.98 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:51.46 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.21 cosmic arm-multi_v7_defconfig : FAILED 2:14.48 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.75 dalmore arm-multi_v7_defconfig : FAILED 3:12.27 dalmore arm-multi_lpae_defconfig : FAILED 1:52.46 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.12 omap5uevm arm-omap2plus_defconfig : FAILED 3:11.27 omap5uevm arm-multi_v7_defconfig : FAILED 2:11.62 omap5uevm arm-multi_lpae_defconfig : FAILED 2:04.23 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:01.88 pi arm-multi_lpae_defconfig : FAILED 1:56.71 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.91 snowball arm-multi_v7_defconfig : FAILED 2:05.28 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:13.49 arndale arm-exynos_defconfig : passed 1:35.82 arndale arm-multi_v7_defconfig : passed 2:07.60 arndale arm-multi_lpae_defconfig : passed 1:23.79 capri arm-bcm_defconfig : passed 0:53.26 capri arm-multi_v7_defconfig : passed 0:48.66 chitra powerpc-ppc64_defconfig : passed 2:03.76 colombus arm-sunxi_defconfig : passed 2:28.91 colombus arm-multi_v7_defconfig : passed 2:39.01 colombus arm-multi_lpae_defconfig : passed 2:33.64 cubie arm-sunxi_defconfig : passed 0:51.20 cubie arm-multi_v7_defconfig : passed 0:49.90 cubie2 arm-sunxi_defconfig : passed 0:54.66 cubie2 arm-multi_v7_defconfig : passed 0:59.24 cubie2 arm-multi_lpae_defconfig : passed 0:56.06 cubox arm-multi_v7_defconfig : passed 1:10.98 cubox arm-mvebu_v7_defconfig : passed 0:57.50 hummingboard arm-imx_v6_v7_defconfig : passed 1:35.38 hummingboard arm-multi_v7_defconfig : passed 1:15.83 jetsontk1 arm-tegra_defconfig : passed 1:38.42 jetsontk1 arm-multi_v7_defconfig : passed 1:39.52 jetsontk1 arm-multi_lpae_defconfig : passed 1:33.48 pandaes arm-omap2plus_defconfig : warnings 1:39.16 pandaes arm-multi_v7_defconfig : passed 1:43.00 pi arm-exynos_defconfig : passed 2:14.08 pit arm-exynos_defconfig : passed 2:13.51 pit arm-multi_v7_defconfig : passed 2:13.22 pit arm-multi_lpae_defconfig : passed 2:21.58 seattle arm64-defconfig : warnings 2:15.46 snow arm-exynos_defconfig : passed 2:09.85 snow arm-multi_v7_defconfig : passed 2:00.25 snow arm-multi_lpae_defconfig : passed 1:59.17 trimslice arm-tegra_defconfig : passed 1:32.97 wandboard arm-imx_v6_v7_defconfig : passed 1:16.69 wandboard arm-multi_v7_defconfig : passed 1:36.76
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.57 beaver arm-multi_v7_defconfig : OFFLINE 2:22.83 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:12.81 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:31.14 parallella arm-multi_v7_defconfig : OFFLINE 2:15.94 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.73 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.86 sama5 arm-sama5_defconfig : OFFLINE 2:24.40 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:15.05 seaboard arm-tegra_defconfig : OFFLINE 2:17.74 seaboard arm-multi_v7_defconfig : OFFLINE 2:12.56 socfpga arm-socfpga_defconfig : OFFLINE 2:19.30 socfpga arm-multi_v7_defconfig : OFFLINE 2:17.14 trimslice arm-multi_v7_defconfig : OFFLINE 2:25.03
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.559044] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.623882] Synopsys Designware Multimedia Card Interface Driver [ 1.631789] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.642153] ledtrig-cpu: registered to indicate activity on CPUs [ 1.649259] usbcore: registered new interface driver usbhid [ 1.655193] usbhid: USB HID core driver [ 1.667377] NET: Registered protocol family 10 [ 1.673980] sit: IPv6 over IPv4 tunneling driver [ 1.680131] NET: Registered protocol family 17 [ 1.684901] can: controller area network core (rev 20120528 abi 9) [ 1.691538] NET: Registered protocol family 29 [ 1.696256] can: raw protocol (rev 20120528) [ 1.700773] can: broadcast manager protocol (rev 20120528 t) [ 1.706774] can: netlink gateway (rev 20130117) max_hops=1 [ 1.713484] Key type dns_resolver registered [ 1.718398] omap_voltage_late_init: Voltage driver support not added [ 1.725389] ThumbEE CPU extension supported. [ 1.729956] Registering SWP/SWPB emulation handler [ 1.773884] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.780421] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.788164] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.796860] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.804780] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812690] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820504] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827857] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834973] hctosys: unable to open rtc device (rtc0) [ 1.848537] Waiting for root device /dev/mmcblk0p2... [ 1.854292] mmc1: new high speed MMC card at address 0001 [ 1.861063] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.866337] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.873001] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.881608] mmcblk1: p1 p2
[PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:54]: got exception: timeout ~$off
[PYBOOT] [bbb 01:56]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.062849] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.068977] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.075315] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.082201] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.091811] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.101324] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.108352] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.151572] ledtrig-cpu: registered to indicate activity on CPUs [ 2.160267] oprofile: using arm/armv7 [ 2.165407] Initializing XFRM netlink socket [ 2.170508] NET: Registered protocol family 10 [ 2.181291] sit: IPv6 over IPv4 tunneling driver [ 2.190099] NET: Registered protocol family 17 [ 2.195062] NET: Registered protocol family 15 [ 2.200314] Key type dns_resolver registered [ 2.205203] omap_voltage_late_init: Voltage driver support not added [ 2.211953] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.220433] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.230057] ThumbEE CPU extension supported. [ 2.234696] Registering SWP/SWPB emulation handler [ 2.239737] SmartReflex Class3 initialized [ 2.312436] mmc1: new high speed MMC card at address 0001 [ 2.324407] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.331935] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.339904] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.347214] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.359223] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.366592] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.377364] hctosys: unable to open rtc device (rtc0) [ 2.382839] sr_init: No PMIC hook to init smartreflex [ 2.388505] sr_init: platform driver register failed for SR [ 2.432107] mmcblk1: p1 p2 [ 2.449841] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.727188] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.741932] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.749014] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.775887] rtc-ds1307 2-006f: SET TIME! [ 1.781626] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.788378] rtc-ds1307 2-006f: 64 bytes nvram [ 1.792996] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.801217] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.807004] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.815242] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.824420] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.831319] hub 1-0:1.0: USB hub found [ 1.835275] hub 1-0:1.0: 1 port detected [ 1.839701] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.845480] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.853605] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.862634] hub 2-0:1.0: USB hub found [ 1.866605] hub 2-0:1.0: 1 port detected [ 1.872653] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.936899] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.954509] aic_dvdd_fixed: disabling [ 1.959232] Waiting for root device /dev/mmcblk0p1... [ 1.982507] mmc1: new high speed MMC card at address 0001 [ 1.988536] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.993458] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999811] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006724] mmcblk1: p1 [ 2.145390] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.180423] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.205740] hub 2-1:1.0: USB hub found [ 2.209717] hub 2-1:1.0: 4 ports detected [ 2.301736] hub 1-1:1.0: USB hub found [ 2.305729] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:50]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.727103] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.741825] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.748903] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.775900] rtc-ds1307 2-006f: SET TIME! [ 1.781668] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.788416] rtc-ds1307 2-006f: 64 bytes nvram [ 1.793028] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.801236] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.807026] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.815265] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.824430] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.831320] hub 1-0:1.0: USB hub found [ 1.835273] hub 1-0:1.0: 1 port detected [ 1.839702] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.845484] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.853589] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.862617] hub 2-0:1.0: USB hub found [ 1.866582] hub 2-0:1.0: 1 port detected [ 1.872637] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.936898] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.954490] aic_dvdd_fixed: disabling [ 1.959214] Waiting for root device /dev/mmcblk0p1... [ 1.982477] mmc1: new high speed MMC card at address 0001 [ 1.988511] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.993427] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999781] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006699] mmcblk1: p1 [ 2.145392] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.180425] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.205723] hub 2-1:1.0: USB hub found [ 2.209693] hub 2-1:1.0: 4 ports detected [ 2.301722] hub 1-1:1.0: USB hub found [ 2.305710] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.218930] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.225255] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.232129] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.242519] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.247389] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.253691] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.260564] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.270157] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.279659] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.286721] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.335388] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.341690] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.348569] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.358160] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.367673] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.374721] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.380842] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.387157] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.393997] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.403592] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.413088] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.420129] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.465601] hctosys: unable to open rtc device (rtc0) [ 2.470908] sr_init: No PMIC hook to init smartreflex [ 2.476440] sr_init: platform driver register failed for SR [ 2.522881] aic_dvdd_fixed: disabling [ 2.530144] ldousb: disabling [ 2.536716] Waiting for root device /dev/mmcblk0p1... [ 2.586972] mmc1: new high speed MMC card at address 0001 [ 2.594909] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.600340] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.607132] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.615610] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.456922] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.531154] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.541476] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.615709] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.626034] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.700280] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.710611] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.784833] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.795161] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.869338] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.879665] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.953886] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.964209] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.038401] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.048759] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.122986] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.133308] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.207480] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.217803] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.292034] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.302355] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.376575] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.386901] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.461131] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.471455] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.545683] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.556009] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.630238] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.640561] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.714796] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.725116] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.799281] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.809609] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.086638] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.160620] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.170697] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.244675] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.254748] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.328728] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.338808] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.412790] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.422868] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.496853] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.506938] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.580921] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.590992] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.664976] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.675043] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.749022] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.759095] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.833078] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.843144] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.917128] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.927197] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.001272] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.011339] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.085324] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.095396] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.169375] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.179455] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.253431] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.263506] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.337488] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.347567] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.421551] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.431626] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:12]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:13]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.638832] can: netlink gateway (rev 20130117) max_hops=1 [ 2.645859] Key type dns_resolver registered [ 2.652331] ThumbEE CPU extension supported. [ 2.656757] Registering SWP/SWPB emulation handler [ 2.670986] usb1_vbus: supplied by vdd-sys-5v0 [ 2.680645] usb2_vbus: supplied by vdd-sys-5v0 [ 2.697284] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.720343] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.727089] [drm] No driver support for vblank timestamp query. [ 2.746074] mmc1: new high speed MMC card at address 0001 [ 2.756001] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.764328] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.772933] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.781424] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.792277] mmcblk1: p1 [ 2.904219] Console: switching to colour frame buffer device 240x75 [ 2.991007] drm drm: fb0: frame buffer device [ 3.012956] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.027842] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.033426] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.043423] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.057991] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.067262] hub 1-0:1.0: USB hub found [ 3.071296] hub 1-0:1.0: 1 port detected [ 3.080866] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.094728] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.157114] dvdd_ts: disabling [ 3.160337] usb1_vbus: disabling [ 3.163641] vdd_cam_1v8_reg: disabling [ 3.171023] Waiting for root device /dev/mmcblk0p1... [ 3.383300] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.366180] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.387936] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:51]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.631841] can: netlink gateway (rev 20130117) max_hops=1 [ 2.638911] Key type dns_resolver registered [ 2.645385] ThumbEE CPU extension supported. [ 2.649815] Registering SWP/SWPB emulation handler [ 2.667013] usb1_vbus: supplied by vdd-sys-5v0 [ 2.692834] usb2_vbus: supplied by vdd-sys-5v0 [ 2.706136] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.729283] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.736158] [drm] No driver support for vblank timestamp query. [ 2.755170] mmc1: new high speed MMC card at address 0001 [ 2.764368] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.771389] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.781151] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.789766] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.800209] mmcblk1: p1 [ 2.917617] Console: switching to colour frame buffer device 240x75 [ 3.004049] drm drm: fb0: frame buffer device [ 3.027868] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.042834] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.048424] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.057293] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.072898] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.083370] hub 1-0:1.0: USB hub found [ 3.087467] hub 1-0:1.0: 1 port detected [ 3.097366] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.111260] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.173497] dvdd_ts: disabling [ 3.176597] usb1_vbus: disabling [ 3.179967] vdd_cam_1v8_reg: disabling [ 3.187368] Waiting for root device /dev/mmcblk0p1... [ 3.397899] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.352098] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.617866] random: nonblocking pool is initialized
[PYBOOT] [dalmore 03:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 03:09]: got exception: timeout ~$off
[PYBOOT] [dalmore 03:11]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.908595] Bluetooth: RFCOMM socket layer initialized [ 2.913813] Bluetooth: RFCOMM ver 1.11 [ 2.917750] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.923148] Bluetooth: BNEP socket layer initialized [ 2.928240] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.934240] Bluetooth: HIDP socket layer initialized [ 2.940905] Key type dns_resolver registered [ 2.950430] Registering SWP/SWPB emulation handler [ 2.965893] usb1_vbus: supplied by vdd-sys-5v0 [ 2.975084] usb2_vbus: supplied by vdd-sys-5v0 [ 2.993012] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.024273] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.031077] [drm] No driver support for vblank timestamp query. [ 3.208408] Console: switching to colour frame buffer device 240x75 [ 3.295592] drm drm: fb0: frame buffer device [ 3.327234] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.336456] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.342301] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.352768] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.377269] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.391245] hub 1-0:1.0: USB hub found [ 3.395280] hub 1-0:1.0: 1 port detected [ 3.409022] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.424136] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.513918] dvdd_ts: disabling [ 3.517133] usb1_vbus: disabling [ 3.520415] vdd_cam_1v8_reg: disabling [ 3.525101] ALSA device list: [ 3.528209] #0: NVIDIA Tegra Dalmore [ 3.534003] Waiting for root device /dev/mmcblk0p1... [ 3.717264] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.761638] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 47.333540] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:47]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.824356] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.831154] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.840781] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.872949] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.874175] usbcore: registered new interface driver usbhid [ 1.878357] usbhid: USB HID core driver [ 1.886004] NET: Registered protocol family 10 [ 1.887168] sit: IPv6 over IPv4 tunneling driver [ 1.893230] NET: Registered protocol family 17 [ 1.895614] NET: Registered protocol family 15 [ 1.900092] Key type dns_resolver registered [ 1.904415] Registering SWP/SWPB emulation handler [ 1.910253] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.914826] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.934543] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.938783] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.948657] mmc1: new DDR MMC card at address 0001 [ 1.953283] max98090 1-0010: MAX98090 REVID=0x43 [ 1.957988] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.964096] max98090 1-0010: use default 2.8v micbias [ 1.967459] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.974106] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.979386] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.989536] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.991222] mmcblk1: p1 p2 [ 1.998427] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.033794] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.050625] VDD10_HDMI_1.0V: disabling [ 2.051315] vdd_g3d: disabling [ 2.052385] BUCK8_2.8V: disabling [ 2.056358] ALSA device list: [ 2.058030] #0: Odroid-U3 [ 2.061627] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:50]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.973461] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.979999] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.988003] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.999113] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.007266] ldo9: bypassed regulator has no supply! [ 2.012387] ldo9: failed to get the current voltage(-517) [ 2.018061] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.032204] smsc95xx v1.0.4 [ 2.036252] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.060096] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.066482] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.083826] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 92:a9:a2:08:57:6d [ 2.102669] smps9: Bringing 0uV into 2100000-2100000uV [ 2.121356] ldo9: bypassed regulator has no supply! [ 2.126472] ldo9: failed to get the current voltage(-517) [ 2.132134] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.146132] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.178002] smps9: Bringing 0uV into 2100000-2100000uV [ 2.196695] ldo9: bypassed regulator has no supply! [ 2.201815] ldo9: failed to get the current voltage(-517) [ 2.207480] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.221906] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 02:48:10 UTC (946694890) [ 2.237569] pbias_mmc_omap5: disabling [ 2.241523] vmmcsdio_fixed: disabling [ 2.246103] Waiting for root device /dev/mmcblk1p2... [ 2.324350] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.460139] hub 1-2:1.0: USB hub found [ 2.464144] hub 1-2:1.0: 3 ports detected [ 2.469998] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.498083] smps9: Bringing 0uV into 2100000-2100000uV [ 2.516828] ldo9: bypassed regulator has no supply! [ 2.521951] ldo9: failed to get the current voltage(-517) [ 2.527620] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:03]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.934075] mmc0: new high speed MMC card at address 0001 [ 1.940097] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.945010] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.951370] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.960279] smps9: Bringing 0uV into 2100000-2100000uV [ 1.968392] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.974914] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.982961] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.994122] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.002188] smsc95xx v1.0.4 [ 2.005209] ldo9: bypassed regulator has no supply! [ 2.010337] ldo9: failed to get the current voltage(-517) [ 2.016002] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.031266] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.053697] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 12:94:dd:cf:d1:bf [ 2.066127] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.072519] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.102935] smps9: Bringing 0uV into 2100000-2100000uV [ 2.121688] ldo9: bypassed regulator has no supply! [ 2.126801] ldo9: failed to get the current voltage(-517) [ 2.132469] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.147030] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 02:45:54 UTC (946694754) [ 2.162658] pbias_mmc_omap5: disabling [ 2.166599] vmmcsdio_fixed: disabling [ 2.171187] Waiting for root device /dev/mmcblk1p2... [ 2.309354] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.445248] hub 1-2:1.0: USB hub found [ 2.449260] hub 1-2:1.0: 3 ports detected [ 2.455106] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.483066] smps9: Bringing 0uV into 2100000-2100000uV [ 2.501768] ldo9: bypassed regulator has no supply! [ 2.506885] ldo9: failed to get the current voltage(-517) [ 2.512555] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:11]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.397361] ldo9: bypassed regulator has no supply! [ 2.402471] ldo9: failed to get the current voltage(-517) [ 2.408145] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.430948] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.438437] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.445021] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.451312] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.458189] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.467784] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.477287] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.484348] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.490465] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.496774] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.503625] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.513208] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.522705] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.529743] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.574339] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.580638] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.587510] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.597098] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.606594] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.613629] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.635380] smps9: Bringing 0uV into 2100000-2100000uV [ 2.664965] ldo9: bypassed regulator has no supply! [ 2.670080] ldo9: failed to get the current voltage(-517) [ 2.675763] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.695790] hctosys: unable to open rtc device (rtc0) [ 2.701089] sr_init: No PMIC hook to init smartreflex [ 2.706593] sr_init: platform driver register failed for SR [ 2.735255] pbias_mmc_omap5: disabling [ 2.739192] vmmcsdio_fixed: disabling [ 2.745286] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 03:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 03:09]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 03:10]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.522648] isl29018 7-0044: No cache defaults, reading back from HW [ 1.528995] isl29018 7-0044: Failed to read 1: -6 [ 1.533580] isl29018 7-0044: regmap initialization fails: -6 [ 1.543840] NET: Registered protocol family 10 [ 1.548287] sit: IPv6 over IPv4 tunneling driver [ 1.551870] NET: Registered protocol family 17 [ 1.555873] can: controller area network core (rev 20120528 abi 9) [ 1.562060] NET: Registered protocol family 29 [ 1.566451] can: raw protocol (rev 20120528) [ 1.570701] can: broadcast manager protocol (rev 20120528 t) [ 1.576343] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582063] Key type dns_resolver registered [ 1.586389] ThumbEE CPU extension supported. [ 1.590292] Registering SWP/SWPB emulation handler [ 1.600057] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605547] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611908] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617281] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627354] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.637542] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.642982] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.653166] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659350] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.664727] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.674448] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.696565] Waiting for root device /dev/mmcblk0p1... [ 1.700447] mmc0: tuning execution failed: -5 [ 1.704473] mmc0: error -5 whilst initialising MMC card [ 2.572456] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586431] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591886] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598261] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603645] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:54]: got exception: timeout ~$off
[PYBOOT] [pi 01:56]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.522670] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529020] isl29018 7-0044: Failed to read 1: -6 [ 1.533602] isl29018 7-0044: regmap initialization fails: -6 [ 1.543859] NET: Registered protocol family 10 [ 1.548309] sit: IPv6 over IPv4 tunneling driver [ 1.551893] NET: Registered protocol family 17 [ 1.555895] can: controller area network core (rev 20120528 abi 9) [ 1.562082] NET: Registered protocol family 29 [ 1.566474] can: raw protocol (rev 20120528) [ 1.570723] can: broadcast manager protocol (rev 20120528 t) [ 1.576365] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582084] Key type dns_resolver registered [ 1.586413] ThumbEE CPU extension supported. [ 1.590314] Registering SWP/SWPB emulation handler [ 1.600079] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605568] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611930] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617304] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627377] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.637532] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.642979] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.653164] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659345] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.664724] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.674445] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.696545] Waiting for root device /dev/mmcblk0p1... [ 1.700390] mmc0: tuning execution failed: -5 [ 1.704452] mmc0: error -5 whilst initialising MMC card [ 2.572469] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586438] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591901] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598275] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603658] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:59]: got exception: timeout ~$off
[PYBOOT] [pi 02:00]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.916168] ledtrig-cpu: registered to indicate activity on CPUs [ 1.922607] usbcore: registered new interface driver usbhid [ 1.928192] usbhid: USB HID core driver [ 1.936706] NET: Registered protocol family 10 [ 1.942077] sit: IPv6 over IPv4 tunneling driver [ 1.947296] NET: Registered protocol family 17 [ 1.951782] can: controller area network core (rev 20120528 abi 9) [ 1.958007] NET: Registered protocol family 29 [ 1.962463] can: raw protocol (rev 20120528) [ 1.966735] can: broadcast manager protocol (rev 20120528 t) [ 1.972412] can: netlink gateway (rev 20130117) max_hops=1 [ 1.978424] Key type dns_resolver registered [ 1.982879] ThumbEE CPU extension supported. [ 1.987182] Registering SWP/SWPB emulation handler [ 1.994537] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.001312] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.010467] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.017486] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.024475] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.031463] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.044799] db8500-esram12: disabling [ 2.048583] db8500-esram34: disabling [ 2.052520] V-CSI/DSI: disabling [ 2.055816] mmci-reg: disabling [ 2.059509] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.065490] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.071868] Waiting for root device /dev/mmcblk0p4... [ 2.946044] mmc3: new high speed MMC card at address 0001 [ 2.954376] mmcblk3: mmc3:0001 3.53 GiB [ 2.960693] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.968444] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.976226] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.984313] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:03]: got exception: timeout ~$off
[PYBOOT] [snowball 02:04]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.668701] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.678680] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.689392] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.712249] NET: Registered protocol family 10 [ 2.717498] sit: IPv6 over IPv4 tunneling driver [ 2.722930] NET: Registered protocol family 17 [ 2.727416] NET: Registered protocol family 35 [ 2.731964] NET: Registered protocol family 37 [ 2.736541] Registering SWP/SWPB emulation handler [ 2.753082] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.759338] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.766296] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.778656] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-29 17:18:51 UTC (957028731) [ 2.787963] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.794982] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.802001] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.808959] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.822509] db8500-esram12: disabling [ 2.826263] db8500-esram34: disabling [ 2.830139] V-CSI/DSI: disabling [ 2.833465] mmci-reg: disabling [ 2.836761] ALSA device list: [ 2.839721] #0: MOP500-card [ 2.843078] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.848999] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.855255] Waiting for root device /dev/mmcblk0p4... [ 69.740692] random: nonblocking pool is initialized cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done.