Failed boards:
cubie2 sunxi_defconfig : FAILED 1:21.12 cubie2 multi_v7_defconfig : FAILED 1:27.35 cubie2 multi_lpae_defconfig : FAILED 1:25.18 cubox multi_v7_defconfig : FAILED 1:33.49 omap5uevm omap2plus_defconfig : FAILED 1:43.69 omap5uevm multi_v7_defconfig : FAILED 1:52.94 omap5uevm multi_lpae_defconfig : FAILED 1:49.72 snowball u8500_defconfig : FAILED 1:49.46
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:11.57 arndale exynos_defconfig : passed 1:17.72 arndale multi_v7_defconfig : passed 1:34.14 arndale multi_lpae_defconfig : passed 1:25.08 bbb omap2plus_defconfig : passed 1:30.24 bbb multi_v7_defconfig : passed 1:20.87 beaver multi_v7_defconfig : passed 1:02.19 capri bcm_defconfig : passed 0:39.24 capri multi_v7_defconfig : passed 0:41.39 cubie sunxi_defconfig : passed 1:20.83 cubie multi_v7_defconfig : passed 1:32.17 dalmore tegra_defconfig : passed 1:31.77 dalmore multi_v7_defconfig : passed 1:26.00 dalmore multi_lpae_defconfig : passed 1:22.45 hummingboard imx_v6_v7_defconfig : passed 1:31.79 hummingboard multi_v7_defconfig : passed 1:20.88 jetson tegra_defconfig : passed 1:00.40 jetson multi_v7_defconfig : passed 1:09.11 jetson multi_lpae_defconfig : passed 0:58.28 panda omap2plus_defconfig : warnings 1:32.21 panda multi_v7_defconfig : warnings 1:44.59 sama5 sama5_defconfig : passed 1:48.80 seaboard tegra_defconfig : passed 1:02.69 seaboard multi_v7_defconfig : passed 1:23.71 snow exynos_defconfig : passed 1:28.50 snow multi_v7_defconfig : passed 1:29.05 snow multi_lpae_defconfig : passed 1:30.05 snowball multi_v7_defconfig : passed 4:10.37 trimslice tegra_defconfig : passed 1:01.05 trimslice multi_v7_defconfig : passed 1:17.21 wandboard imx_v6_v7_defconfig : passed 1:13.21 wandboard multi_v7_defconfig : passed 1:04.01
Offline boards:
beaver tegra_defconfig : OFFLINE 0:39.60
Board legend is available at http://arm-soc.lixom.net/boards.html
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.270315] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.277820] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.283708] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.292679] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.301687] scsi0 : ahci_platform [ 1.305421] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.314123] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.319764] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.327850] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.340318] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.347390] hub 1-0:1.0: USB hub found [ 1.351235] hub 1-0:1.0: 1 port detected [ 1.356299] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.361965] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.369912] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.385302] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.392343] hub 2-0:1.0: USB hub found [ 1.396177] hub 2-0:1.0: 1 port detected [ 1.401203] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.407886] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.415771] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.480133] hub 3-0:1.0: USB hub found [ 1.483972] hub 3-0:1.0: 1 port detected [ 1.488986] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.495707] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.503548] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.565112] hub 4-0:1.0: USB hub found [ 1.568950] hub 4-0:1.0: 1 port detected [ 1.573627] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:17 UTC (17) [ 1.661164] No MAC Management Counters available [ 1.665943] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.672577] IP-Config: Failed to open eth0 [ 1.676700] IP-Config: No network devices available [ 1.681617] vcc3v3: disabling [ 1.684582] vcc3v0: disabling [ 1.687677] ALSA device list: [ 1.690658] No soundcards found. [ 1.694810] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.270944] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.278444] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.284329] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.293300] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.302298] scsi0 : ahci_platform [ 1.306029] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.314749] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.320405] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.328487] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.340945] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.348011] hub 1-0:1.0: USB hub found [ 1.351869] hub 1-0:1.0: 1 port detected [ 1.356938] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.362613] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.370557] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.385931] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.392984] hub 2-0:1.0: USB hub found [ 1.396826] hub 2-0:1.0: 1 port detected [ 1.401848] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.408530] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.416412] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.480834] hub 3-0:1.0: USB hub found [ 1.484688] hub 3-0:1.0: 1 port detected [ 1.489704] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.496426] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.504268] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.565759] hub 4-0:1.0: USB hub found [ 1.569599] hub 4-0:1.0: 1 port detected [ 1.574300] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.661791] No MAC Management Counters available [ 1.666566] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.673185] IP-Config: Failed to open eth0 [ 1.677313] IP-Config: No network devices available [ 1.682230] vcc3v3: disabling [ 1.685197] vcc3v0: disabling [ 1.688292] ALSA device list: [ 1.691270] No soundcards found. [ 1.695402] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.891383] usb1-vbus: 5000 mV [ 0.894821] usb2-vbus: 5000 mV [ 0.965722] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.973205] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.979103] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.988071] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.996980] scsi0 : ahci_platform [ 1.000620] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008844] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.014442] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.022303] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045746] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052718] hub 1-0:1.0: USB hub found [ 1.056563] hub 1-0:1.0: 1 port detected [ 1.061034] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066674] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.074513] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095692] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102560] hub 2-0:1.0: USB hub found [ 1.106386] hub 2-0:1.0: 1 port detected [ 1.110814] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.117494] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.125307] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.190511] hub 3-0:1.0: USB hub found [ 1.194304] hub 3-0:1.0: 1 port detected [ 1.198795] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.205431] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.213294] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.280506] hub 4-0:1.0: USB hub found [ 1.284300] hub 4-0:1.0: 1 port detected [ 1.288666] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.375715] ata1: SATA link down (SStatus 0 SControl 300) [ 1.392027] No MAC Management Counters available [ 1.396795] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.403384] IP-Config: Failed to open eth0 [ 1.407507] IP-Config: No network devices available [ 1.412401] vcc3v3: disabling [ 1.415366] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.240360] SPEAr-ehci: EHCI SPEAr driver [ 1.244473] tegra-ehci: Tegra EHCI driver [ 1.248601] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.254782] ohci-pci: OHCI PCI platform driver [ 1.259290] ohci-platform: OHCI generic platform driver [ 1.264605] ohci-omap3: OHCI OMAP3 driver [ 1.268703] SPEAr-ohci: OHCI SPEAr driver [ 1.273448] usbcore: registered new interface driver usb-storage [ 1.280935] mousedev: PS/2 mouse device common for all mice [ 1.287913] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297234] i2c /dev entries driver [ 1.302850] usbcore: registered new interface driver uvcvideo [ 1.308602] USB Video Class driver (1.1.1) [ 1.312702] gspca_main: v2.14.0 registered [ 1.319846] orion_wdt: Initial timeout 25 sec [ 1.325327] sdhci: Secure Digital Host Controller Interface driver [ 1.331495] sdhci: Copyright(c) Pierre Ossman [ 1.336531] Synopsys Designware Multimedia Card Interface Driver [ 1.342901] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.349311] usbcore: registered new interface driver usbhid [ 1.354876] usbhid: USB HID core driver [ 1.359853] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368524] TCP: cubic registered [ 1.371880] NET: Registered protocol family 17 [ 1.376339] can: controller area network core (rev 20120528 abi 9) [ 1.382574] NET: Registered protocol family 29 [ 1.387012] can: raw protocol (rev 20120528) [ 1.391278] can: broadcast manager protocol (rev 20120528 t) [ 1.396933] can: netlink gateway (rev 20130117) max_hops=1 [ 1.402799] Key type dns_resolver registered [ 1.407268] ThumbEE CPU extension supported. [ 1.411544] Registering SWP/SWPB emulation handler [ 1.416325] PJ4 iWMMXt v2 coprocessor enabled. [ 1.421929] USB Power: 5000 mV [ 1.425502] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-06 20:00:30 UTC (1402084830) [ 1.436018] ALSA device list: [ 1.438970] No soundcards found. [ 1.442903] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.641236] can: raw protocol (rev 20120528) [ 47.641242] can: broadcast manager protocol (rev 20120528 t) [ 47.641251] can: netlink gateway (rev 20130117) max_hops=1 [ 47.641544] Key type dns_resolver registered [ 47.641638] omap_vc_init_channel: No PMIC info for vdd_core [ 47.641641] omap_vp_init: No PMIC info for vdd_core [ 47.641645] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.641646] omap_vp_init: No PMIC info for vdd_mm [ 47.641650] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.641652] omap_vp_init: No PMIC info for vdd_mpu [ 47.641957] ThumbEE CPU extension supported. [ 47.641970] Registering SWP/SWPB emulation handler [ 47.667732] palmas 0-0048: Irq flag is 0x00000000 [ 47.724940] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.731688] mmc0: new high speed MMC card at address 0001 [ 47.737578] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.742408] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.748672] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.755538] smps123: 600 <--> 1500 mV at 1060 mV [ 47.755551] mmcblk0: unknown partition table [ 47.760808] mmcblk0boot1: unknown partition table [ 47.761577] mmcblk0boot0: unknown partition table [ 47.776222] smps45: 600 <--> 1310 mV at 1030 mV [ 47.782645] smps6: 1200 mV [ 47.786616] smps7: 1800 mV [ 47.790717] smps8: 600 <--> 1310 mV at 1040 mV [ 47.796440] smps9: failed to get the current voltage [ 47.801689] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.813748] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.941817] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.086827] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.092912] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.100339] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.107201] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.114894] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.128326] ALSA device list: [ 48.131417] No soundcards found. [ 48.135416] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 48.081635] can: raw protocol (rev 20120528) [ 48.081640] can: broadcast manager protocol (rev 20120528 t) [ 48.081651] can: netlink gateway (rev 20130117) max_hops=1 [ 48.081935] Key type dns_resolver registered [ 48.082025] omap_vc_init_channel: No PMIC info for vdd_core [ 48.082028] omap_vp_init: No PMIC info for vdd_core [ 48.082032] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.082033] omap_vp_init: No PMIC info for vdd_mm [ 48.082037] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.082039] omap_vp_init: No PMIC info for vdd_mpu [ 48.082350] ThumbEE CPU extension supported. [ 48.082362] Registering SWP/SWPB emulation handler [ 48.097865] palmas 0-0048: Irq flag is 0x00000000 [ 48.165351] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.172083] mmc0: new high speed MMC card at address 0001 [ 48.177963] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.182789] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.189048] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.195909] mmcblk0: unknown partition table [ 48.195916] smps123: 600 <--> 1500 mV at 1060 mV [ 48.206303] mmcblk0boot1: unknown partition table [ 48.211559] smps45: 600 <--> 1310 mV at 1030 mV [ 48.212092] mmcblk0boot0: unknown partition table [ 48.222963] smps6: 1200 mV [ 48.226919] smps7: 1800 mV [ 48.231065] smps8: 600 <--> 1310 mV at 1040 mV [ 48.236807] smps9: failed to get the current voltage [ 48.242051] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.254094] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.382168] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.527178] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.533264] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.540689] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.547537] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.555230] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.568620] ALSA device list: [ 48.571718] No soundcards found. [ 48.575712] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.591686] Key type dns_resolver registered [ 2.591804] omap_vc_init_channel: No PMIC info for vdd_core [ 2.591807] omap_vp_init: No PMIC info for vdd_core [ 2.591817] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.591819] omap_vp_init: No PMIC info for vdd_mm [ 2.591828] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.591831] omap_vp_init: No PMIC info for vdd_mpu [ 2.592388] ThumbEE CPU extension supported. [ 2.592408] Registering SWP/SWPB emulation handler [ 2.592417] SmartReflex Class3 initialized [ 2.614072] palmas 0-0048: Irq flag is 0x00000000 [ 2.674088] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.680483] mmc0: new high speed MMC card at address 0001 [ 2.688376] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.693506] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.699984] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.709340] mmcblk0: unknown partition table [ 2.715940] mmcblk0boot1: unknown partition table [ 2.722614] mmcblk0boot0: unknown partition table [ 2.744179] smps123: 600 <--> 1500 mV at 1060 mV [ 2.751253] smps45: 600 <--> 1310 mV at 1030 mV [ 2.758568] smps6: 1200 mV [ 2.763381] smps7: 1800 mV [ 2.768280] smps8: 600 <--> 1310 mV at 1040 mV [ 2.774802] smps9: failed to get the current voltage [ 2.780766] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.795141] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.803988] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.811219] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.817285] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.826438] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.835824] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.842790] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.851278] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.859921] sr_init: No PMIC hook to init smartreflex [ 2.865471] sr_init: platform driver register failed for SR [ 2.893539] pbias_mmc_omap5: disabling [ 2.899052] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.508789] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.520721] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.528015] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.539520] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.548065] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.559997] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.567321] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.578796] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.586608] HS USB OTG: no transceiver configured [ 3.591339] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.599182] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.607086] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.619018] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.626342] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.637817] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.646392] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.658325] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.665649] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.677124] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.684936] HS USB OTG: no transceiver configured [ 3.689636] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.697509] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.705444] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.717346] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.724670] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.736145] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.744720] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.756652] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.763977] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.775451] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.783264] HS USB OTG: no transceiver configured [ 3.787963] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.795837] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.803741] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.815673] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.822998] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.834472] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.843048] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout