Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7-210-g272911b/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.45 bbb arm-multi_v7_defconfig : FAILED 2:00.28 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.96 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:45.28 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:54.80 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.39 cosmic arm-multi_v7_defconfig : FAILED 2:08.16 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-multi_v7_defconfig : FAILED 1:57.17 dalmore arm-multi_lpae_defconfig : FAILED 1:58.80 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.38 omap5uevm arm-multi_v7_defconfig : FAILED 2:17.13 omap5uevm arm-multi_lpae_defconfig : FAILED 2:23.68 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:05.72 pi arm-multi_lpae_defconfig : FAILED 1:49.16 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:50.37 seaboard arm-multi_v7_defconfig : FAILED 1:54.97 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:55.90 snowball arm-multi_v7_defconfig : FAILED 2:09.59 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:12.49 arndale arm-exynos_defconfig : passed 1:32.72 arndale arm-multi_v7_defconfig : passed 1:30.32 arndale arm-multi_lpae_defconfig : passed 1:20.52 capri arm-bcm_defconfig : passed 0:50.45 capri arm-multi_v7_defconfig : passed 0:52.23 chitra powerpc-ppc64_defconfig : passed 2:11.56 colombus arm-sunxi_defconfig : passed 2:24.63 colombus arm-multi_v7_defconfig : passed 2:31.48 colombus arm-multi_lpae_defconfig : passed 2:35.80 cubie arm-sunxi_defconfig : passed 0:52.28 cubie arm-multi_v7_defconfig : passed 0:52.97 cubie2 arm-sunxi_defconfig : passed 0:54.57 cubie2 arm-multi_v7_defconfig : passed 0:56.95 cubie2 arm-multi_lpae_defconfig : passed 0:58.22 cubox arm-multi_v7_defconfig : passed 1:21.27 cubox arm-mvebu_v7_defconfig : passed 0:56.92 hummingboard arm-imx_v6_v7_defconfig : passed 1:38.96 hummingboard arm-multi_v7_defconfig : passed 1:28.52 jetsontk1 arm-tegra_defconfig : passed 1:36.64 jetsontk1 arm-multi_v7_defconfig : passed 1:35.18 jetsontk1 arm-multi_lpae_defconfig : passed 2:08.13 omap5uevm arm-omap2plus_defconfig : passed 1:04.31 pandaes arm-omap2plus_defconfig : warnings 1:35.63 pandaes arm-multi_v7_defconfig : passed 1:54.72 pi arm-exynos_defconfig : passed 2:13.35 pit arm-exynos_defconfig : passed 2:11.31 pit arm-multi_v7_defconfig : passed 2:14.11 pit arm-multi_lpae_defconfig : passed 2:14.52 seattle arm64-defconfig : warnings 2:20.14 snow arm-exynos_defconfig : passed 2:07.35 snow arm-multi_v7_defconfig : passed 1:58.59 snow arm-multi_lpae_defconfig : passed 1:58.47 trimslice arm-multi_v7_defconfig : passed 2:44.08 wandboard arm-imx_v6_v7_defconfig : passed 1:15.16 wandboard arm-multi_v7_defconfig : passed 1:09.19
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:14.59 beaver arm-multi_v7_defconfig : OFFLINE 2:19.81 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.19 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:21.03 dalmore arm-tegra_defconfig : OFFLINE 2:13.65 parallella arm-multi_v7_defconfig : OFFLINE 2:16.73 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:46.88 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.30 sama5 arm-sama5_defconfig : OFFLINE 2:18.55 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:16.64 socfpga arm-socfpga_defconfig : OFFLINE 2:25.09 socfpga arm-multi_v7_defconfig : OFFLINE 2:14.74 trimslice arm-tegra_defconfig : OFFLINE 2:20.92
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.631849] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.642149] ledtrig-cpu: registered to indicate activity on CPUs [ 1.649249] usbcore: registered new interface driver usbhid [ 1.655166] usbhid: USB HID core driver [ 1.667179] NET: Registered protocol family 10 [ 1.673742] sit: IPv6 over IPv4 tunneling driver [ 1.679895] NET: Registered protocol family 17 [ 1.684664] can: controller area network core (rev 20120528 abi 9) [ 1.691303] NET: Registered protocol family 29 [ 1.696029] can: raw protocol (rev 20120528) [ 1.700551] can: broadcast manager protocol (rev 20120528 t) [ 1.706546] can: netlink gateway (rev 20130117) max_hops=1 [ 1.713304] Key type dns_resolver registered [ 1.718203] omap_voltage_late_init: Voltage driver support not added [ 1.726479] ThumbEE CPU extension supported. [ 1.731108] Registering SWP/SWPB emulation handler [ 1.773349] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779890] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787669] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.796363] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.804270] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812079] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819896] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827236] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835898] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843804] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.853526] mmc1: new high speed MMC card at address 0001 [ 1.860769] hctosys: unable to open rtc device (rtc0) [ 1.873784] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879804] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886874] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895738] mmcblk1: p1 p2 [ 1.901468] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:57]: got exception: timeout ~$off
[PYBOOT] [bbb 01:58]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.057997] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.064134] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.070478] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.077373] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.086995] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.096522] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.103559] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.146722] ledtrig-cpu: registered to indicate activity on CPUs [ 2.155458] oprofile: using arm/armv7 [ 2.160550] Initializing XFRM netlink socket [ 2.165629] NET: Registered protocol family 10 [ 2.176371] sit: IPv6 over IPv4 tunneling driver [ 2.185152] NET: Registered protocol family 17 [ 2.190089] NET: Registered protocol family 15 [ 2.195320] Key type dns_resolver registered [ 2.200242] omap_voltage_late_init: Voltage driver support not added [ 2.206977] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.215469] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.225743] ThumbEE CPU extension supported. [ 2.230390] Registering SWP/SWPB emulation handler [ 2.235439] SmartReflex Class3 initialized [ 2.305034] mmc1: new high speed MMC card at address 0001 [ 2.318065] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.328192] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.338157] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.351879] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.359318] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.371236] mmcblk1: p1 p2 [ 2.379394] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.387728] hctosys: unable to open rtc device (rtc0) [ 2.393043] sr_init: No PMIC hook to init smartreflex [ 2.398874] sr_init: platform driver register failed for SR [ 2.452926] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.712969] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.720049] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745674] rtc-ds1307 2-006f: SET TIME! [ 1.751448] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758203] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762814] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.770994] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776787] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.785027] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794195] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.801085] hub 1-0:1.0: USB hub found [ 1.805036] hub 1-0:1.0: 1 port detected [ 1.809425] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815199] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823311] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832344] hub 2-0:1.0: USB hub found [ 1.836314] hub 2-0:1.0: 1 port detected [ 1.842360] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876308] vdd_3v3: supplied by regen1 [ 1.915880] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.933538] aic_dvdd_fixed: disabling [ 1.938349] Waiting for root device /dev/mmcblk0p1... [ 1.982204] mmc1: new high speed MMC card at address 0001 [ 1.988185] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.993075] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999413] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006458] mmcblk1: p1 [ 2.115162] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150226] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175427] hub 2-1:1.0: USB hub found [ 2.179395] hub 2-1:1.0: 4 ports detected [ 2.271450] hub 1-1:1.0: USB hub found [ 2.275436] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:52]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:54]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.712490] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.719567] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745737] rtc-ds1307 2-006f: SET TIME! [ 1.751490] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758244] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762854] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.771038] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776820] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.785062] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794229] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.801111] hub 1-0:1.0: USB hub found [ 1.805061] hub 1-0:1.0: 1 port detected [ 1.809462] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815234] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823341] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832370] hub 2-0:1.0: USB hub found [ 1.836341] hub 2-0:1.0: 1 port detected [ 1.842345] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876355] vdd_3v3: supplied by regen1 [ 1.914034] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.930966] aic_dvdd_fixed: disabling [ 1.935570] Waiting for root device /dev/mmcblk0p1... [ 1.962638] mmc1: new high speed MMC card at address 0001 [ 1.968612] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.973494] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979842] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986705] mmcblk1: p1 [ 2.115232] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150258] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175453] hub 2-1:1.0: USB hub found [ 2.179432] hub 2-1:1.0: 4 ports detected [ 2.271476] hub 1-1:1.0: USB hub found [ 2.275454] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.174147] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181022] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191418] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196284] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202585] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209454] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219053] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228551] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235614] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283723] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290020] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296891] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306491] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315993] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323032] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329159] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335474] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342317] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351910] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361416] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368464] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375164] vdd_3v3: supplied by regen1 [ 2.413813] hctosys: unable to open rtc device (rtc0) [ 2.419122] sr_init: No PMIC hook to init smartreflex [ 2.424639] sr_init: platform driver register failed for SR [ 2.471965] aic_dvdd_fixed: disabling [ 2.476239] ldousb: disabling [ 2.483493] Waiting for root device /dev/mmcblk0p1... [ 2.535421] mmc1: new high speed MMC card at address 0001 [ 2.543179] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548469] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555250] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563741] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.456826] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.531063] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.541388] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.615587] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.625908] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.700155] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.710479] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.784665] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.794988] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.869227] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.879552] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.953746] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.964071] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.038334] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.048787] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.123093] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.133413] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.207652] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.217968] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.292203] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.302520] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.376762] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.387083] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.461319] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.471637] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.545816] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.556139] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.630368] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.640693] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.714878] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.725202] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.799429] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.809747] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.084894] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.158880] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.168954] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.242933] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.253006] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.326987] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.337066] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.411073] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.421134] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.495122] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.505204] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.579193] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.589257] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.663247] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.673318] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.747298] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.757369] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.831357] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.841429] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.915413] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.925490] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.999476] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.009549] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.083534] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.093609] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.167593] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.177670] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.251650] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.261730] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.335712] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.345788] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.419768] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.429849] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:07]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.497358] Key type dns_resolver registered [ 2.503798] ThumbEE CPU extension supported. [ 2.508214] Registering SWP/SWPB emulation handler [ 2.537422] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.544574] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.554353] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.570592] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.577341] [drm] No driver support for vblank timestamp query. [ 2.599651] mmc1: new high speed MMC card at address 0001 [ 2.609800] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.618231] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.628081] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.637675] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.649153] mmcblk1: p1 [ 2.758176] Console: switching to colour frame buffer device 240x75 [ 2.845512] drm drm: fb0: frame buffer device [ 2.864820] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.874916] usb2_vbus: supplied by vdd-sys-5v0 [ 2.886528] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.892117] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.901002] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.914835] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.925269] hub 1-0:1.0: USB hub found [ 2.929276] hub 1-0:1.0: 1 port detected [ 2.939382] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.953216] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.015686] dvdd_ts: disabling [ 3.018786] usb1_vbus: disabling [ 3.022159] vdd_cam_1v8_reg: disabling [ 3.029607] Waiting for root device /dev/mmcblk0p1... [ 3.239834] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.218541] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 50.198341] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.497235] Key type dns_resolver registered [ 2.503677] ThumbEE CPU extension supported. [ 2.508093] Registering SWP/SWPB emulation handler [ 2.540756] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.547843] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.556803] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.572332] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.579099] [drm] No driver support for vblank timestamp query. [ 2.595248] mmc1: new high speed MMC card at address 0001 [ 2.604170] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.610002] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.618676] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.627205] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.638104] mmcblk1: p1 [ 2.758470] Console: switching to colour frame buffer device 240x75 [ 2.845846] drm drm: fb0: frame buffer device [ 2.864613] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.874707] usb2_vbus: supplied by vdd-sys-5v0 [ 2.886414] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.892012] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.900796] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.914627] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.925061] hub 1-0:1.0: USB hub found [ 2.929069] hub 1-0:1.0: 1 port detected [ 2.939805] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.954427] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.015617] dvdd_ts: disabling [ 3.018730] usb1_vbus: disabling [ 3.022128] vdd_cam_1v8_reg: disabling [ 3.029952] Waiting for root device /dev/mmcblk0p1... [ 3.244656] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.222090] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.156482] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:56]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.729814] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.739252] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.746302] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.777394] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.778584] usbcore: registered new interface driver usbhid [ 1.783816] usbhid: USB HID core driver [ 1.792586] NET: Registered protocol family 10 [ 1.793192] sit: IPv6 over IPv4 tunneling driver [ 1.796442] NET: Registered protocol family 17 [ 1.800457] NET: Registered protocol family 15 [ 1.804917] Key type dns_resolver registered [ 1.809239] Registering SWP/SWPB emulation handler [ 1.823127] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.823410] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.852931] max98090 1-0010: MAX98090 REVID=0x43 [ 1.855200] max98090 1-0010: use default 2.8v micbias [ 1.861225] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.866047] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.873751] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.880009] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.889614] mmc1: new DDR MMC card at address 0001 [ 1.899604] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.899873] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.909739] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.910716] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.919418] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.926056] mmcblk1: p1 p2 [ 1.940702] VDD10_HDMI_1.0V: disabling [ 1.941368] vdd_g3d: disabling [ 1.942460] BUCK8_2.8V: disabling [ 1.946455] ALSA device list: [ 1.948117] #0: Odroid-U3 [ 1.951791] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.744075] 7e00: ee2b97d0 00000001 00000000 c2009c40 ee6e6e10 00000000 ee6ea580 ee6ea20c [ 2.752639] 7e20: ee6ea5c0 ee0ccb80 ee6ea380 c05c58a8 ee6ea200 c143b968 024080c0 c0f09ad0 [ 2.761200] 7e40: c1341ea4 c1341edc ee17fa10 ee17fa10 ee6ea1d0 ee17fa10 c13c4f5c ee5c2c00 [ 2.769759] 7e60: 0000000f ee00b000 ee03ec00 c05c59fc ee17fa10 ee6ea190 c144fcfc c0798b08 [ 2.778321] 7e80: ee17fa10 c144fcf4 c144fcfc c077b350 00000000 ee087ec8 c077b63c 00000001 [ 2.786881] 7ea0: ee5c2c00 00000000 ee00b000 c07798f4 ee03fb70 ee2bfab8 ee17fa10 ee17fa44 [ 2.795443] 7ec0: c13a29c0 c077b1ec ee17fa10 00000001 2ddd1000 ee17fa10 ee17fa10 c13a29c0 [ 2.804007] 7ee0: c13a27e0 c077a6d0 ee17fa10 c13a27c0 c13a27c0 c077ab5c c13a27f4 ee03ec00 [ 2.812582] 7f00: ee00b000 00000000 ee5c2c00 c0356718 c1302100 ee00b018 ee00b000 ee03ec18 [ 2.821141] 7f20: 00000088 c1302100 ee00b018 ee086000 ee00b000 c0357384 ee00b168 00000000 [ 2.829701] 7f40: c035734c 00000000 ee03dc40 ee03ec00 c035734c 00000000 00000000 00000000 [ 2.838263] 7f60: 00000000 c035c148 00000001 00000000 40480427 ee03ec00 00000000 00000000 [ 2.846829] 7f80: ee087f80 ee087f80 00000001 00010001 ee087f90 ee087f90 ee03dc40 ee03dc40 [ 2.855393] 7fa0: c035c06c 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.863956] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.872513] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 3015c023 71828600 [ 2.881072] [<c035c570>] (kthread_data) from [<c0357968>] (wq_worker_sleeping+0x8/0xd0) [ 2.889462] [<c0357968>] (wq_worker_sleeping) from [<c0b528c4>] (__schedule+0x380/0x590) [ 2.897936] [<c0b528c4>] (__schedule) from [<c0b52b18>] (schedule+0x44/0x9c) [ 2.905323] [<c0b52b18>] (schedule) from [<c034386c>] (do_exit+0x678/0xa18) [ 2.912616] [<c034386c>] (do_exit) from [<c030bd7c>] (die+0x410/0x474) [ 2.919450] [<c030bd7c>] (die) from [<c031cb9c>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.927742] [<c031cb9c>] (__do_kernel_fault.part.0) from [<c0317c10>] (do_page_fault+0x370/0x384) [ 2.937035] [<c0317c10>] (do_page_fault) from [<c030137c>] (do_PrefetchAbort+0x38/0x9c) [ 2.945419] [<c030137c>] (do_PrefetchAbort) from [<c030c58c>] (__pabt_svc+0x4c/0x80) [ 2.953519] Exception stack(0xee087d88 to 0xee087dd0) [ 2.958805] 7d80: ee320e10 00000005 0000006d c05d2064 00000005 ee362c00 [ 2.967365] 7da0: 00000005 eefe6d44 0000000e ee6ea5c0 ee6e6e10 00000000 ed800b20 ee087dd8 [ 2.975919] 7dc0: c05d2070 0000006c 20000033 ffffffff [ 2.981210] [<c030c58c>] (__pabt_svc) from [<0000006c>] (0x6c) [ 2.987320] Code: ebff8888 e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.993696] ---[ end trace 23ee71b34d8e9389 ]--- [ 2.998526] Fixing recursive fault but reboot is needed!
[PYBOOT] [omap5uevm 02:20]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:21]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:22]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.184166] [<c034386c>] (do_exit) from [<c030bd7c>] (die+0x410/0x474) [ 3.191000] [<c030bd7c>] (die) from [<c031cb9c>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 3.199298] [<c031cb9c>] (__do_kernel_fault.part.0) from [<c0317c10>] (do_page_fault+0x370/0x384) [ 3.208585] [<c0317c10>] (do_page_fault) from [<c03012c8>] (do_DataAbort+0x3c/0xb8) [ 3.216605] [<c03012c8>] (do_DataAbort) from [<c030c420>] (__dabt_svc+0x40/0x60) [ 3.224351] Exception stack(0xee087bf8 to 0xee087c40) [ 3.229637] 7be0: ee0350de c0f0473f [ 3.238195] 7c00: 80000000 00000053 aef39821 c0f0473c ee087ca0 ee035890 81e08e7f c0f04743 [ 3.246755] 7c20: ee087c58 c0c1ceac 00000051 ee087c48 c059669c c05966a0 a0000013 ffffffff [ 3.255317] [<c030c420>] (__dabt_svc) from [<c05966a0>] (vsnprintf+0x180/0x458) [ 3.262973] [<c05966a0>] (vsnprintf) from [<c058eac8>] (add_uevent_var+0x3c/0xc8) [ 3.270808] [<c058eac8>] (add_uevent_var) from [<c058edb0>] (kobject_uevent_env+0x25c/0x508) [ 3.279638] [<c058edb0>] (kobject_uevent_env) from [<c0778a40>] (device_add+0x364/0x568) [ 3.288110] [<c0778a40>] (device_add) from [<c0983600>] (__thermal_cooling_device_register+0x128/0x39c) [ 3.297945] [<c0983600>] (__thermal_cooling_device_register) from [<c0985f38>] (__cpufreq_cooling_register+0x280/0x574) [ 3.309231] [<c0985f38>] (__cpufreq_cooling_register) from [<c0998a30>] (cpufreq_ready+0x70/0xb8) [ 3.318525] [<c0998a30>] (cpufreq_ready) from [<c0996714>] (cpufreq_online+0x3ec/0x6d8) [ 3.326899] [<c0996714>] (cpufreq_online) from [<c0779c1c>] (subsys_interface_register+0x90/0xcc) [ 3.336191] [<c0779c1c>] (subsys_interface_register) from [<c09952d8>] (cpufreq_register_driver+0x150/0x1a0) [ 3.346487] [<c09952d8>] (cpufreq_register_driver) from [<c0998e30>] (dt_cpufreq_probe+0x70/0xe8) [ 3.355773] [<c0998e30>] (dt_cpufreq_probe) from [<c077ccb8>] (platform_drv_probe+0x50/0xb0) [ 3.364611] [<c077ccb8>] (platform_drv_probe) from [<c077b4d4>] (driver_probe_device+0x208/0x2b4) [ 3.373905] [<c077b4d4>] (driver_probe_device) from [<c07798f4>] (bus_for_each_drv+0x60/0x94) [ 3.382835] [<c07798f4>] (bus_for_each_drv) from [<c077b1ec>] (__device_attach+0xb0/0x114) [ 3.391490] [<c077b1ec>] (__device_attach) from [<c077a6d0>] (bus_probe_device+0x84/0x8c) [ 3.400049] [<c077a6d0>] (bus_probe_device) from [<c077ab5c>] (deferred_probe_work_func+0x68/0x94) [ 3.409435] [<c077ab5c>] (deferred_probe_work_func) from [<c0356718>] (process_one_work+0x1ec/0x410) [ 3.418997] [<c0356718>] (process_one_work) from [<c0357384>] (worker_thread+0x38/0x594) [ 3.427473] [<c0357384>] (worker_thread) from [<c035c148>] (kthread+0xdc/0xf4) [ 3.435031] [<c035c148>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 3.442586] Code: ebff8888 e1a00006 e8bd81f0 e59032f8 (e5130014) [ 3.448967] ---[ end trace 135172ed4036062b ]--- [ 3.453793] Fixing recursive fault but reboot is needed!
[PYBOOT] [omap5uevm 02:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:14]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:15]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.528161] isl29018 7-0044: No cache defaults, reading back from HW [ 1.534510] isl29018 7-0044: Failed to read 1: -6 [ 1.539092] isl29018 7-0044: regmap initialization fails: -6 [ 1.549316] NET: Registered protocol family 10 [ 1.553768] sit: IPv6 over IPv4 tunneling driver [ 1.557351] NET: Registered protocol family 17 [ 1.561353] can: controller area network core (rev 20120528 abi 9) [ 1.567540] NET: Registered protocol family 29 [ 1.571930] can: raw protocol (rev 20120528) [ 1.576180] can: broadcast manager protocol (rev 20120528 t) [ 1.581822] can: netlink gateway (rev 20130117) max_hops=1 [ 1.587552] Key type dns_resolver registered [ 1.591868] ThumbEE CPU extension supported. [ 1.595769] Registering SWP/SWPB emulation handler [ 1.604979] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.610462] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.616828] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.622206] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.632278] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.638237] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.651691] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.657419] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.663528] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.668904] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.678648] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.700727] Waiting for root device /dev/mmcblk0p1... [ 1.704581] mmc0: tuning execution failed: -5 [ 1.708665] mmc0: error -5 whilst initialising MMC card [ 2.572949] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586234] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591690] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598065] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603449] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:47]: got exception: timeout ~$off
[PYBOOT] [pi 01:48]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.523112] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529459] isl29018 7-0044: Failed to read 1: -6 [ 1.534045] isl29018 7-0044: regmap initialization fails: -6 [ 1.544270] NET: Registered protocol family 10 [ 1.548716] sit: IPv6 over IPv4 tunneling driver [ 1.552306] NET: Registered protocol family 17 [ 1.556305] can: controller area network core (rev 20120528 abi 9) [ 1.562492] NET: Registered protocol family 29 [ 1.566884] can: raw protocol (rev 20120528) [ 1.571133] can: broadcast manager protocol (rev 20120528 t) [ 1.576775] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582498] Key type dns_resolver registered [ 1.586820] ThumbEE CPU extension supported. [ 1.590722] Registering SWP/SWPB emulation handler [ 1.599925] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605406] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611771] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617150] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627225] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.633181] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.646616] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.652350] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.658455] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.663832] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.673568] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.695624] Waiting for root device /dev/mmcblk0p1... [ 1.699473] mmc0: tuning execution failed: -5 [ 1.703558] mmc0: error -5 whilst initialising MMC card [ 2.572907] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586209] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591667] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598041] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603424] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:03]: got exception: timeout ~$off
[PYBOOT] [pi 02:05]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657215] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667705] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674183] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679602] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.688028] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.698888] mmc2: switch to bus width 8 failed [ 1.703622] mmc2: switch to bus width 4 failed [ 1.708113] mmc2: new high speed MMC card at address 0001 [ 1.708739] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.720843] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.723021] hub 3-0:1.0: USB hub found [ 1.723067] hub 3-0:1.0: 1 port detected [ 1.733455] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.740076] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.741156] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.741159] [drm] No driver support for vblank timestamp query. [ 1.759981] mmcblk2: p3 [ 1.793738] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.801977] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.804864] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.812210] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.831812] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.833110] Console: switching to colour frame buffer device 170x48 [ 1.837618] mmc0: new SDIO card at address 0001 [ 1.889589] drm drm: fb0: frame buffer device [ 1.908704] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.915505] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.922585] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.936825] vdd_1v5: disabling [ 1.939906] vdd_1v2: disabling [ 2.603272] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.614699] Waiting for root device /dev/mmcblk0p3... [ 58.439721] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:53]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:54]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.725500] Bluetooth: RFCOMM ver 1.11 [ 1.729307] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.734635] Bluetooth: BNEP socket layer initialized [ 1.739620] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.745553] Bluetooth: HIDP socket layer initialized [ 1.751075] Key type dns_resolver registered [ 1.756403] Registering SWP/SWPB emulation handler [ 1.771028] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.777742] VDDIO_HDMI: supplied by vdd_5v0 [ 1.782250] vdd_sys: supplied by vdd_5v0 [ 1.786255] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.791267] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.797822] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.808245] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.815301] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.820756] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.828710] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.848416] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.856477] hub 3-0:1.0: USB hub found [ 1.860362] hub 3-0:1.0: 1 port detected [ 1.871145] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.877757] [drm] No driver support for vblank timestamp query. [ 2.024294] Console: switching to colour frame buffer device 170x48 [ 2.044076] drm drm: fb0: frame buffer device [ 2.078415] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.085525] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.093121] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.112289] vdd_1v5: disabling [ 2.115342] vdd_1v2: disabling [ 2.119118] ALSA device list: [ 2.122092] #0: NVIDIA Tegra Seaboard [ 2.365938] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.377022] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.927124] ledtrig-cpu: registered to indicate activity on CPUs [ 1.933990] usbcore: registered new interface driver usbhid [ 1.939575] usbhid: USB HID core driver [ 1.953826] NET: Registered protocol family 10 [ 1.960113] sit: IPv6 over IPv4 tunneling driver [ 1.965972] NET: Registered protocol family 17 [ 1.970520] can: controller area network core (rev 20120528 abi 9) [ 1.976837] NET: Registered protocol family 29 [ 1.981323] can: raw protocol (rev 20120528) [ 1.985626] can: broadcast manager protocol (rev 20120528 t) [ 1.991333] can: netlink gateway (rev 20130117) max_hops=1 [ 1.997741] Key type dns_resolver registered [ 2.002380] ThumbEE CPU extension supported. [ 2.006713] Registering SWP/SWPB emulation handler [ 2.019409] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.026580] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.036132] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.043212] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.050231] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.057250] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.074462] db8500-esram12: disabling [ 2.078277] db8500-esram34: disabling [ 2.082427] V-CSI/DSI: disabling [ 2.085784] mmci-reg: disabling [ 2.090911] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.096923] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.105621] Waiting for root device /dev/mmcblk0p4... [ 2.139221] mmc3: new high speed MMC card at address 0001 [ 2.145538] mmcblk3: mmc3:0001 3.53 GiB [ 2.149963] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.155822] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.161590] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.168518] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:07]: got exception: timeout ~$off
[PYBOOT] [snowball 02:08]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.557586] iio iio:device1: Full-scale not possible [ 2.569763] iio iio:device1: registered pressure sensor lps001wp [ 2.576293] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.582397] coresight-etb10 801a4000.etb: ETB initialized [ 2.588195] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.594635] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.609802] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.620544] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.630523] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.641235] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.664062] NET: Registered protocol family 10 [ 2.669342] sit: IPv6 over IPv4 tunneling driver [ 2.674774] NET: Registered protocol family 17 [ 2.679260] NET: Registered protocol family 35 [ 2.683807] NET: Registered protocol family 37 [ 2.688385] Registering SWP/SWPB emulation handler [ 2.694610] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.700775] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.707458] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.714874] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-25 18:33:52 UTC (956687632) [ 2.724151] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.731170] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.738159] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.745147] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.758697] db8500-esram12: disabling [ 2.762481] db8500-esram34: disabling [ 2.766357] V-CSI/DSI: disabling [ 2.769622] mmci-reg: disabling [ 2.772949] ALSA device list: [ 2.775909] #0: MOP500-card [ 2.779266] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.785278] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.791473] Waiting for root device /dev/mmcblk0p4...
[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:53]: got exception: timeout ~$off
[PYBOOT] [snowball 01:54]: Done.