Failed boards:
cubie2 sunxi_defconfig : FAILED 1:23.86 cubie2 multi_v7_defconfig : FAILED 1:39.65 cubie2 multi_lpae_defconfig : FAILED 1:22.15 cubox multi_v7_defconfig : FAILED 1:32.39 omap5uevm omap2plus_defconfig : FAILED 1:46.17 omap5uevm multi_v7_defconfig : FAILED 1:50.21 omap5uevm multi_lpae_defconfig : FAILED 1:43.77 snowball u8500_defconfig : FAILED 1:51.43
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:13.45 arndale exynos_defconfig : passed 1:29.61 arndale multi_v7_defconfig : passed 1:33.79 arndale multi_lpae_defconfig : passed 1:19.22 bbb omap2plus_defconfig : passed 1:32.63 bbb multi_v7_defconfig : passed 1:21.31 beaver tegra_defconfig : passed 1:03.07 beaver multi_v7_defconfig : passed 1:02.48 capri bcm_defconfig : passed 0:39.14 capri multi_v7_defconfig : passed 0:41.45 cubie sunxi_defconfig : passed 1:14.44 cubie multi_v7_defconfig : passed 1:35.27 dalmore tegra_defconfig : passed 1:26.96 dalmore multi_v7_defconfig : passed 1:25.24 dalmore multi_lpae_defconfig : passed 1:23.93 hummingboard imx_v6_v7_defconfig : passed 1:30.73 hummingboard multi_v7_defconfig : passed 1:09.07 jetson tegra_defconfig : passed 0:56.64 jetson multi_v7_defconfig : passed 1:01.27 jetson multi_lpae_defconfig : passed 1:00.20 panda omap2plus_defconfig : warnings 1:31.00 panda multi_v7_defconfig : warnings 1:41.84 sama5 sama5_defconfig : passed 1:52.78 seaboard tegra_defconfig : passed 1:25.11 seaboard multi_v7_defconfig : passed 1:12.29 snow exynos_defconfig : passed 1:18.72 snow multi_v7_defconfig : passed 1:28.77 snow multi_lpae_defconfig : passed 1:29.45 snowball multi_v7_defconfig : passed 4:42.81 trimslice tegra_defconfig : passed 1:11.50 trimslice multi_v7_defconfig : passed 1:59.36 wandboard imx_v6_v7_defconfig : passed 1:07.34 wandboard multi_v7_defconfig : passed 1:16.25
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.270772] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.278276] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.284166] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.293136] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.302164] scsi0 : ahci_platform [ 1.305899] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.314597] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.320237] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.328328] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.340767] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.347828] hub 1-0:1.0: USB hub found [ 1.351677] hub 1-0:1.0: 1 port detected [ 1.356748] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.362421] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.370364] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.385754] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.392795] hub 2-0:1.0: USB hub found [ 1.396631] hub 2-0:1.0: 1 port detected [ 1.401664] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.408346] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.416230] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.480596] hub 3-0:1.0: USB hub found [ 1.484436] hub 3-0:1.0: 1 port detected [ 1.489443] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.496165] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.504005] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.565579] hub 4-0:1.0: USB hub found [ 1.569422] hub 4-0:1.0: 1 port detected [ 1.574101] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.661616] No MAC Management Counters available [ 1.666396] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.673035] IP-Config: Failed to open eth0 [ 1.677160] IP-Config: No network devices available [ 1.682073] vcc3v3: disabling [ 1.685040] vcc3v0: disabling [ 1.688133] ALSA device list: [ 1.691112] No soundcards found. [ 1.695268] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.265095] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.272596] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.278481] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.287449] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.296440] scsi0 : ahci_platform [ 1.300167] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.308883] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.314528] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.322604] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.335094] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.342150] hub 1-0:1.0: USB hub found [ 1.346011] hub 1-0:1.0: 1 port detected [ 1.351074] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.356748] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.364692] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.380077] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.387119] hub 2-0:1.0: USB hub found [ 1.390955] hub 2-0:1.0: 1 port detected [ 1.395972] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.402661] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.410547] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.474971] hub 3-0:1.0: USB hub found [ 1.478821] hub 3-0:1.0: 1 port detected [ 1.483830] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.490544] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.498387] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.559899] hub 4-0:1.0: USB hub found [ 1.563732] hub 4-0:1.0: 1 port detected [ 1.568410] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.655935] No MAC Management Counters available [ 1.660705] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.667317] IP-Config: Failed to open eth0 [ 1.671442] IP-Config: No network devices available [ 1.676358] vcc3v3: disabling [ 1.679323] vcc3v0: disabling [ 1.682416] ALSA device list: [ 1.685396] No soundcards found. [ 1.689535] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.892458] usb1-vbus: 5000 mV [ 0.895955] usb2-vbus: 5000 mV [ 0.965878] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.973365] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.979256] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.988224] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.997128] scsi0 : ahci_platform [ 1.000766] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008989] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.014584] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.022444] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045901] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052848] hub 1-0:1.0: USB hub found [ 1.056694] hub 1-0:1.0: 1 port detected [ 1.061167] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066811] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.074660] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095845] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102714] hub 2-0:1.0: USB hub found [ 1.106539] hub 2-0:1.0: 1 port detected [ 1.110977] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.117650] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.125466] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.190662] hub 3-0:1.0: USB hub found [ 1.194449] hub 3-0:1.0: 1 port detected [ 1.198933] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.205566] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.213427] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.280662] hub 4-0:1.0: USB hub found [ 1.284458] hub 4-0:1.0: 1 port detected [ 1.288805] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.375875] ata1: SATA link down (SStatus 0 SControl 300) [ 1.392186] No MAC Management Counters available [ 1.396955] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.403555] IP-Config: Failed to open eth0 [ 1.407677] IP-Config: No network devices available [ 1.412575] vcc3v3: disabling [ 1.415542] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.240056] SPEAr-ehci: EHCI SPEAr driver [ 1.244165] tegra-ehci: Tegra EHCI driver [ 1.248300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.254482] ohci-pci: OHCI PCI platform driver [ 1.258988] ohci-platform: OHCI generic platform driver [ 1.264303] ohci-omap3: OHCI OMAP3 driver [ 1.268403] SPEAr-ohci: OHCI SPEAr driver [ 1.273143] usbcore: registered new interface driver usb-storage [ 1.280633] mousedev: PS/2 mouse device common for all mice [ 1.287605] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.296921] i2c /dev entries driver [ 1.302536] usbcore: registered new interface driver uvcvideo [ 1.308291] USB Video Class driver (1.1.1) [ 1.312392] gspca_main: v2.14.0 registered [ 1.319524] orion_wdt: Initial timeout 25 sec [ 1.325010] sdhci: Secure Digital Host Controller Interface driver [ 1.331176] sdhci: Copyright(c) Pierre Ossman [ 1.336213] Synopsys Designware Multimedia Card Interface Driver [ 1.342580] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.348978] usbcore: registered new interface driver usbhid [ 1.354539] usbhid: USB HID core driver [ 1.359504] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368215] TCP: cubic registered [ 1.371571] NET: Registered protocol family 17 [ 1.376029] can: controller area network core (rev 20120528 abi 9) [ 1.382264] NET: Registered protocol family 29 [ 1.386703] can: raw protocol (rev 20120528) [ 1.390968] can: broadcast manager protocol (rev 20120528 t) [ 1.396624] can: netlink gateway (rev 20130117) max_hops=1 [ 1.402496] Key type dns_resolver registered [ 1.406965] ThumbEE CPU extension supported. [ 1.411243] Registering SWP/SWPB emulation handler [ 1.416024] PJ4 iWMMXt v2 coprocessor enabled. [ 1.421613] USB Power: 5000 mV [ 1.425184] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-06 00:11:55 UTC (1402013515) [ 1.435714] ALSA device list: [ 1.438668] No soundcards found. [ 1.442596] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.641643] can: raw protocol (rev 20120528) [ 47.641650] can: broadcast manager protocol (rev 20120528 t) [ 47.641660] can: netlink gateway (rev 20130117) max_hops=1 [ 47.641950] Key type dns_resolver registered [ 47.642045] omap_vc_init_channel: No PMIC info for vdd_core [ 47.642047] omap_vp_init: No PMIC info for vdd_core [ 47.642050] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.642052] omap_vp_init: No PMIC info for vdd_mm [ 47.642055] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.642057] omap_vp_init: No PMIC info for vdd_mpu [ 47.642358] ThumbEE CPU extension supported. [ 47.642370] Registering SWP/SWPB emulation handler [ 47.668137] palmas 0-0048: Irq flag is 0x00000000 [ 47.725356] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.732129] mmc0: new high speed MMC card at address 0001 [ 47.738020] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.742841] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.749111] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.755976] mmcblk0: unknown partition table [ 47.760843] smps123: 600 <--> 1500 mV at 1060 mV [ 47.766378] mmcblk0boot1: unknown partition table [ 47.771978] smps45: 600 <--> 1310 mV at 1030 mV [ 47.772169] mmcblk0boot0: unknown partition table [ 47.783408] smps6: 1200 mV [ 47.787375] smps7: 1800 mV [ 47.791481] smps8: 600 <--> 1310 mV at 1040 mV [ 47.797215] smps9: failed to get the current voltage [ 47.802463] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.814518] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.942230] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.087239] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.093319] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.100735] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.107597] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.115293] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.128755] ALSA device list: [ 48.131855] No soundcards found. [ 48.135860] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 48.081284] can: raw protocol (rev 20120528) [ 48.081290] can: broadcast manager protocol (rev 20120528 t) [ 48.081301] can: netlink gateway (rev 20130117) max_hops=1 [ 48.081601] Key type dns_resolver registered [ 48.081683] omap_vc_init_channel: No PMIC info for vdd_core [ 48.081685] omap_vp_init: No PMIC info for vdd_core [ 48.081689] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.081691] omap_vp_init: No PMIC info for vdd_mm [ 48.081695] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.081696] omap_vp_init: No PMIC info for vdd_mpu [ 48.082018] ThumbEE CPU extension supported. [ 48.082031] Registering SWP/SWPB emulation handler [ 48.097479] palmas 0-0048: Irq flag is 0x00000000 [ 48.164997] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.171743] mmc0: new high speed MMC card at address 0001 [ 48.177614] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.182441] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.188718] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.195584] mmcblk0: unknown partition table [ 48.200598] smps123: 600 <--> 1500 mV at 1060 mV [ 48.205549] mmcblk0boot1: unknown partition table [ 48.211471] mmcblk0boot0: unknown partition table [ 48.216724] smps45: 600 <--> 1310 mV at 1030 mV [ 48.223233] smps6: 1200 mV [ 48.227230] smps7: 1800 mV [ 48.231340] smps8: 600 <--> 1310 mV at 1040 mV [ 48.237098] smps9: failed to get the current voltage [ 48.242349] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.254403] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.381801] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.526810] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.532886] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.540310] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.547169] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.554863] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.568292] ALSA device list: [ 48.571387] No soundcards found. [ 48.575389] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.593179] Key type dns_resolver registered [ 2.593295] omap_vc_init_channel: No PMIC info for vdd_core [ 2.593300] omap_vp_init: No PMIC info for vdd_core [ 2.593309] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.593313] omap_vp_init: No PMIC info for vdd_mm [ 2.593322] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.593325] omap_vp_init: No PMIC info for vdd_mpu [ 2.593888] ThumbEE CPU extension supported. [ 2.593910] Registering SWP/SWPB emulation handler [ 2.593918] SmartReflex Class3 initialized [ 2.615573] palmas 0-0048: Irq flag is 0x00000000 [ 2.675910] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.676211] mmc0: new high speed MMC card at address 0001 [ 2.682095] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.682330] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.682534] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.685358] mmcblk0: unknown partition table [ 2.687327] mmcblk0boot1: unknown partition table [ 2.689280] mmcblk0boot0: unknown partition table [ 2.765742] smps123: 600 <--> 1500 mV at 1060 mV [ 2.772823] smps45: 600 <--> 1310 mV at 1030 mV [ 2.780237] smps6: 1200 mV [ 2.784936] smps7: 1800 mV [ 2.789858] smps8: 600 <--> 1310 mV at 1040 mV [ 2.796283] smps9: failed to get the current voltage [ 2.802236] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.816613] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.825453] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.832638] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.838751] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.847883] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.857274] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.864251] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.872777] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.881423] sr_init: No PMIC hook to init smartreflex [ 2.886913] sr_init: platform driver register failed for SR [ 2.915221] pbias_mmc_omap5: disabling [ 2.920733] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.508880] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.520782] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.528106] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.539581] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.548156] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.560089] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.567413] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.578887] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.586700] HS USB OTG: no transceiver configured [ 3.591430] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.599273] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.607208] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.619140] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.626434] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.637908] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.646514] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.658416] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.665740] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.677215] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.685058] HS USB OTG: no transceiver configured [ 3.689758] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.697601] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.705535] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.717468] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.724792] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.736267] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.744842] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.756774] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.764099] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.775573] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.783386] HS USB OTG: no transceiver configured [ 3.788085] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.795959] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.803894] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.815826] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.823120] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.834625] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.843200] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout