Failed boards:
cubie2 sunxi_defconfig : FAILED 1:21.13 cubie2 multi_v7_defconfig : FAILED 1:38.83 cubie2 multi_lpae_defconfig : FAILED 1:22.17 cubox multi_v7_defconfig : FAILED 1:30.81 omap5uevm omap2plus_defconfig : FAILED 1:43.68 omap5uevm multi_v7_defconfig : FAILED 1:53.17 omap5uevm multi_lpae_defconfig : FAILED 1:56.13 snowball u8500_defconfig : FAILED 1:47.91
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:10.28 arndale exynos_defconfig : passed 1:15.60 arndale multi_v7_defconfig : passed 1:38.95 arndale multi_lpae_defconfig : passed 1:20.16 bbb omap2plus_defconfig : passed 1:33.69 bbb multi_v7_defconfig : passed 1:26.83 beaver tegra_defconfig : passed 0:58.85 beaver multi_v7_defconfig : passed 1:08.53 capri bcm_defconfig : passed 0:39.05 capri multi_v7_defconfig : passed 0:42.07 cubie sunxi_defconfig : passed 1:15.70 cubie multi_v7_defconfig : passed 1:47.06 dalmore tegra_defconfig : passed 1:21.84 dalmore multi_v7_defconfig : passed 2:32.70 dalmore multi_lpae_defconfig : passed 1:18.21 hummingboard imx_v6_v7_defconfig : passed 1:27.11 hummingboard multi_v7_defconfig : passed 1:17.00 jetson tegra_defconfig : passed 0:57.28 jetson multi_v7_defconfig : passed 1:04.79 jetson multi_lpae_defconfig : passed 1:09.52 panda omap2plus_defconfig : warnings 1:37.69 panda multi_v7_defconfig : passed 1:59.81 sama5 sama5_defconfig : passed 1:55.72 seaboard tegra_defconfig : passed 1:05.97 seaboard multi_v7_defconfig : passed 1:19.35 snow exynos_defconfig : passed 1:21.23 snow multi_v7_defconfig : passed 1:29.04 snow multi_lpae_defconfig : passed 1:21.08 snowball multi_v7_defconfig : passed 4:14.50 trimslice tegra_defconfig : passed 1:08.39 trimslice multi_v7_defconfig : passed 1:04.62 wandboard imx_v6_v7_defconfig : passed 1:02.13 wandboard multi_v7_defconfig : passed 1:08.50
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.265460] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.272963] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.278852] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.287821] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.296826] scsi0 : ahci_platform [ 1.300547] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.309252] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.314900] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.322979] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.335462] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.342528] hub 1-0:1.0: USB hub found [ 1.346375] hub 1-0:1.0: 1 port detected [ 1.351428] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.357096] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.365042] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.380444] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.387481] hub 2-0:1.0: USB hub found [ 1.391315] hub 2-0:1.0: 1 port detected [ 1.396339] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.403022] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.410902] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.475292] hub 3-0:1.0: USB hub found [ 1.479134] hub 3-0:1.0: 1 port detected [ 1.484136] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.490849] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.498692] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.560270] hub 4-0:1.0: USB hub found [ 1.564112] hub 4-0:1.0: 1 port detected [ 1.568796] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.656305] No MAC Management Counters available [ 1.661078] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.667709] IP-Config: Failed to open eth0 [ 1.671836] IP-Config: No network devices available [ 1.676756] vcc3v3: disabling [ 1.679722] vcc3v0: disabling [ 1.682817] ALSA device list: [ 1.685798] No soundcards found. [ 1.689952] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.265423] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.272924] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.278814] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.287783] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.296774] scsi0 : ahci_platform [ 1.300495] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.309216] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.314865] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.322946] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.335422] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.342472] hub 1-0:1.0: USB hub found [ 1.346324] hub 1-0:1.0: 1 port detected [ 1.351359] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.357004] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.364965] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.380404] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.387449] hub 2-0:1.0: USB hub found [ 1.391280] hub 2-0:1.0: 1 port detected [ 1.396301] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.402987] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.410870] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.475302] hub 3-0:1.0: USB hub found [ 1.479150] hub 3-0:1.0: 1 port detected [ 1.484165] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.490878] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.498720] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.560235] hub 4-0:1.0: USB hub found [ 1.564072] hub 4-0:1.0: 1 port detected [ 1.568761] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.656263] No MAC Management Counters available [ 1.661032] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.667643] IP-Config: Failed to open eth0 [ 1.671764] IP-Config: No network devices available [ 1.676680] vcc3v3: disabling [ 1.679646] vcc3v0: disabling [ 1.682740] ALSA device list: [ 1.685718] No soundcards found. [ 1.689863] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.892252] usb1-vbus: 5000 mV [ 0.895689] usb2-vbus: 5000 mV [ 0.965770] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.973255] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.979144] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.988111] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.997022] scsi0 : ahci_platform [ 1.000668] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008890] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.014485] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.022344] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045793] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052752] hub 1-0:1.0: USB hub found [ 1.056598] hub 1-0:1.0: 1 port detected [ 1.061077] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066720] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.074565] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095735] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102616] hub 2-0:1.0: USB hub found [ 1.106440] hub 2-0:1.0: 1 port detected [ 1.110881] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.117555] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.125372] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.190554] hub 3-0:1.0: USB hub found [ 1.194343] hub 3-0:1.0: 1 port detected [ 1.198828] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.205463] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.213318] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.280554] hub 4-0:1.0: USB hub found [ 1.284347] hub 4-0:1.0: 1 port detected [ 1.288712] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.375765] ata1: SATA link down (SStatus 0 SControl 300) [ 1.392065] No MAC Management Counters available [ 1.396838] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.403428] IP-Config: Failed to open eth0 [ 1.407548] IP-Config: No network devices available [ 1.412447] vcc3v3: disabling [ 1.415411] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.240697] SPEAr-ehci: EHCI SPEAr driver [ 1.244801] tegra-ehci: Tegra EHCI driver [ 1.248931] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.255112] ohci-pci: OHCI PCI platform driver [ 1.259618] ohci-platform: OHCI generic platform driver [ 1.264934] ohci-omap3: OHCI OMAP3 driver [ 1.269032] SPEAr-ohci: OHCI SPEAr driver [ 1.273772] usbcore: registered new interface driver usb-storage [ 1.281293] mousedev: PS/2 mouse device common for all mice [ 1.288293] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297601] i2c /dev entries driver [ 1.303368] usbcore: registered new interface driver uvcvideo [ 1.309119] USB Video Class driver (1.1.1) [ 1.313219] gspca_main: v2.14.0 registered [ 1.320356] orion_wdt: Initial timeout 25 sec [ 1.325833] sdhci: Secure Digital Host Controller Interface driver [ 1.331997] sdhci: Copyright(c) Pierre Ossman [ 1.337030] Synopsys Designware Multimedia Card Interface Driver [ 1.343401] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.349803] usbcore: registered new interface driver usbhid [ 1.355360] usbhid: USB HID core driver [ 1.360331] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368851] TCP: cubic registered [ 1.372201] NET: Registered protocol family 17 [ 1.376659] can: controller area network core (rev 20120528 abi 9) [ 1.382895] NET: Registered protocol family 29 [ 1.387333] can: raw protocol (rev 20120528) [ 1.391597] can: broadcast manager protocol (rev 20120528 t) [ 1.397253] can: netlink gateway (rev 20130117) max_hops=1 [ 1.403120] Key type dns_resolver registered [ 1.407593] ThumbEE CPU extension supported. [ 1.411876] Registering SWP/SWPB emulation handler [ 1.416666] PJ4 iWMMXt v2 coprocessor enabled. [ 1.422269] USB Power: 5000 mV [ 1.425843] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-05 21:36:44 UTC (1402004204) [ 1.436382] ALSA device list: [ 1.439333] No soundcards found. [ 1.443276] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.659040] mmcblk0: unknown partition table [ 47.660682] TCP: cubic registered [ 47.660690] NET: Registered protocol family 17 [ 47.660706] can: controller area network core (rev 20120528 abi 9) [ 47.660753] NET: Registered protocol family 29 [ 47.660761] can: raw protocol (rev 20120528) [ 47.660766] can: broadcast manager protocol (rev 20120528 t) [ 47.660776] can: netlink gateway (rev 20130117) max_hops=1 [ 47.661077] Key type dns_resolver registered [ 47.661154] omap_vc_init_channel: No PMIC info for vdd_core [ 47.661156] omap_vp_init: No PMIC info for vdd_core [ 47.661161] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.661163] omap_vp_init: No PMIC info for vdd_mm [ 47.661166] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.661168] omap_vp_init: No PMIC info for vdd_mpu [ 47.661479] ThumbEE CPU extension supported. [ 47.661491] Registering SWP/SWPB emulation handler [ 47.668053] palmas 0-0048: Irq flag is 0x00000000 [ 47.750804] mmcblk0boot1: unknown partition table [ 47.756598] mmcblk0boot0: unknown partition table [ 47.762181] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.769760] smps123: 600 <--> 1500 mV at 1060 mV [ 47.775885] smps45: 600 <--> 1310 mV at 1030 mV [ 47.782308] smps6: 1200 mV [ 47.786275] smps7: 1800 mV [ 47.790380] smps8: 600 <--> 1310 mV at 1040 mV [ 47.796101] smps9: failed to get the current voltage [ 47.801354] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.813414] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.942342] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.949446] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.955521] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.962951] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.969808] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.977499] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.990908] ALSA device list: [ 47.994019] No soundcards found. [ 47.998018] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 48.081739] can: raw protocol (rev 20120528) [ 48.081745] can: broadcast manager protocol (rev 20120528 t) [ 48.081756] can: netlink gateway (rev 20130117) max_hops=1 [ 48.082042] Key type dns_resolver registered [ 48.082136] omap_vc_init_channel: No PMIC info for vdd_core [ 48.082139] omap_vp_init: No PMIC info for vdd_core [ 48.082142] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.082144] omap_vp_init: No PMIC info for vdd_mm [ 48.082148] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.082149] omap_vp_init: No PMIC info for vdd_mpu [ 48.082467] ThumbEE CPU extension supported. [ 48.082483] Registering SWP/SWPB emulation handler [ 48.097988] palmas 0-0048: Irq flag is 0x00000000 [ 48.165420] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.172164] mmc0: new high speed MMC card at address 0001 [ 48.178045] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.182861] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.189123] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.195965] smps123: 600 <--> 1500 mV at 1060 mV [ 48.195981] mmcblk0: unknown partition table [ 48.201234] mmcblk0boot1: unknown partition table [ 48.201996] mmcblk0boot0: unknown partition table [ 48.216663] smps45: 600 <--> 1310 mV at 1030 mV [ 48.223117] smps6: 1200 mV [ 48.227107] smps7: 1800 mV [ 48.231239] smps8: 600 <--> 1310 mV at 1040 mV [ 48.236991] smps9: failed to get the current voltage [ 48.242243] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.254292] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.382302] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.527311] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.533389] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.540817] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.547675] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.555372] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.568737] ALSA device list: [ 48.571833] No soundcards found. [ 48.575832] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.620776] Key type dns_resolver registered [ 2.620897] omap_vc_init_channel: No PMIC info for vdd_core [ 2.620901] omap_vp_init: No PMIC info for vdd_core [ 2.620910] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.620913] omap_vp_init: No PMIC info for vdd_mm [ 2.620922] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.620925] omap_vp_init: No PMIC info for vdd_mpu [ 2.621486] ThumbEE CPU extension supported. [ 2.621509] Registering SWP/SWPB emulation handler [ 2.621523] SmartReflex Class3 initialized [ 2.669761] palmas 0-0048: Irq flag is 0x00000000 [ 2.687222] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.687599] mmc0: new high speed MMC card at address 0001 [ 2.692481] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.692709] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.692917] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.695722] mmcblk0: unknown partition table [ 2.697673] mmcblk0boot1: unknown partition table [ 2.699365] mmcblk0boot0: unknown partition table [ 2.775970] smps123: 600 <--> 1500 mV at 1060 mV [ 2.783053] smps45: 600 <--> 1310 mV at 1030 mV [ 2.790426] smps6: 1200 mV [ 2.795218] smps7: 1800 mV [ 2.800138] smps8: 600 <--> 1310 mV at 1040 mV [ 2.806617] smps9: failed to get the current voltage [ 2.812609] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.826949] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.835803] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.842941] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.849051] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.858191] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.867550] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.874503] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.883131] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.891773] sr_init: No PMIC hook to init smartreflex [ 2.897256] sr_init: platform driver register failed for SR [ 2.925566] pbias_mmc_omap5: disabling [ 2.931109] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.597412] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.605316] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.617248] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.624572] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.636047] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.644531] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.656463] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.663787] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675262] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.683074] HS USB OTG: no transceiver configured [ 3.687774] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.695648] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.703552] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.715484] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.722808] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.734283] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.742797] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.754699] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.762023] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.773498] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.781341] HS USB OTG: no transceiver configured [ 3.786041] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.793884] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.801788] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.813720] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.821044] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.832519] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.841064] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.852996] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.860290] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.871795] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.879577] HS USB OTG: no transceiver configured [ 3.884307] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.892150] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.900054] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.911987] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.919281] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.930755] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout