Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7-133-g90fa7c7/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.05 bbb arm-multi_v7_defconfig : FAILED 1:56.94 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.86 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.54 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:45.29 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:02.77 cosmic arm-multi_v7_defconfig : FAILED 2:09.87 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.21 dalmore arm-multi_v7_defconfig : FAILED 2:03.13 dalmore arm-multi_lpae_defconfig : FAILED 2:03.04 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.30 omap5uevm arm-multi_v7_defconfig : FAILED 0:51.23 omap5uevm arm-multi_lpae_defconfig : FAILED 0:53.64 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:49.62 seaboard arm-multi_v7_defconfig : FAILED 1:55.43 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:58.83 snowball arm-multi_v7_defconfig : FAILED 2:05.38 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 3:02.00 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:18.31 arndale arm-exynos_defconfig : passed 1:33.77 arndale arm-multi_v7_defconfig : passed 1:38.39 arndale arm-multi_lpae_defconfig : passed 1:21.71 capri arm-bcm_defconfig : passed 0:47.10 capri arm-multi_v7_defconfig : passed 0:52.01 chitra powerpc-ppc64_defconfig : passed 2:06.88 colombus arm-sunxi_defconfig : passed 2:20.80 colombus arm-multi_v7_defconfig : passed 2:32.53 colombus arm-multi_lpae_defconfig : passed 2:33.94 cubie arm-sunxi_defconfig : passed 0:52.64 cubie arm-multi_v7_defconfig : passed 0:51.43 cubie2 arm-sunxi_defconfig : passed 1:01.28 cubie2 arm-multi_v7_defconfig : passed 0:52.65 cubie2 arm-multi_lpae_defconfig : passed 0:55.68 cubox arm-multi_v7_defconfig : passed 1:17.03 cubox arm-mvebu_v7_defconfig : passed 1:01.67 hummingboard arm-imx_v6_v7_defconfig : passed 1:23.62 hummingboard arm-multi_v7_defconfig : passed 1:22.56 jetsontk1 arm-tegra_defconfig : passed 1:38.67 jetsontk1 arm-multi_v7_defconfig : passed 1:40.49 jetsontk1 arm-multi_lpae_defconfig : passed 1:33.70 omap5uevm arm-omap2plus_defconfig : passed 1:04.03 pandaes arm-omap2plus_defconfig : warnings 1:40.42 pandaes arm-multi_v7_defconfig : passed 1:34.53 pi arm-exynos_defconfig : passed 2:08.46 pi arm-multi_v7_defconfig : passed 2:16.33 pi arm-multi_lpae_defconfig : passed 2:20.70 pit arm-exynos_defconfig : passed 2:13.21 pit arm-multi_v7_defconfig : passed 2:13.68 pit arm-multi_lpae_defconfig : passed 2:13.24 seattle arm64-defconfig : warnings 2:30.03 snow arm-exynos_defconfig : passed 2:03.87 snow arm-multi_v7_defconfig : passed 2:07.18 snow arm-multi_lpae_defconfig : passed 2:29.07 trimslice arm-tegra_defconfig : passed 1:32.55 trimslice arm-multi_v7_defconfig : passed 1:39.01 wandboard arm-multi_v7_defconfig : passed 1:17.49
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.38 beaver arm-multi_v7_defconfig : OFFLINE 2:14.86 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:14.16 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:21.75 parallella arm-multi_v7_defconfig : OFFLINE 2:19.25 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.64 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:45.13 sama5 arm-sama5_defconfig : OFFLINE 2:25.16 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:12.12 socfpga arm-socfpga_defconfig : OFFLINE 2:19.66 socfpga arm-multi_v7_defconfig : OFFLINE 2:21.04
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.631020] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641306] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648400] usbcore: registered new interface driver usbhid [ 1.654328] usbhid: USB HID core driver [ 1.666384] NET: Registered protocol family 10 [ 1.672975] sit: IPv6 over IPv4 tunneling driver [ 1.679125] NET: Registered protocol family 17 [ 1.683896] can: controller area network core (rev 20120528 abi 9) [ 1.690530] NET: Registered protocol family 29 [ 1.695250] can: raw protocol (rev 20120528) [ 1.699772] can: broadcast manager protocol (rev 20120528 t) [ 1.705765] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712517] Key type dns_resolver registered [ 1.717419] omap_voltage_late_init: Voltage driver support not added [ 1.725699] ThumbEE CPU extension supported. [ 1.730331] Registering SWP/SWPB emulation handler [ 1.772503] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779029] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786802] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795476] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803388] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811217] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819031] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826380] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835074] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842987] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852701] mmc1: new high speed MMC card at address 0001 [ 1.859949] hctosys: unable to open rtc device (rtc0) [ 1.872970] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878992] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885966] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894808] mmcblk1: p1 p2 [ 1.900523] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:54]: got exception: timeout ~$off
[PYBOOT] [bbb 01:56]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.042220] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.048336] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.054663] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.061537] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.071129] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.080624] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.087639] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.131044] ledtrig-cpu: registered to indicate activity on CPUs [ 2.139718] oprofile: using arm/armv7 [ 2.144797] Initializing XFRM netlink socket [ 2.149877] NET: Registered protocol family 10 [ 2.160585] sit: IPv6 over IPv4 tunneling driver [ 2.169352] NET: Registered protocol family 17 [ 2.174283] NET: Registered protocol family 15 [ 2.179505] Key type dns_resolver registered [ 2.184433] omap_voltage_late_init: Voltage driver support not added [ 2.191169] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.199637] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.209873] ThumbEE CPU extension supported. [ 2.214525] Registering SWP/SWPB emulation handler [ 2.219555] SmartReflex Class3 initialized [ 2.288845] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.296132] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.306627] mmc1: new high speed MMC card at address 0001 [ 2.318780] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.327057] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.334827] hctosys: unable to open rtc device (rtc0) [ 2.340142] sr_init: No PMIC hook to init smartreflex [ 2.345923] sr_init: platform driver register failed for SR [ 2.385643] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.393623] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.407927] mmcblk1: p1 p2 [ 2.425429] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.718072] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.725150] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750816] rtc-ds1307 2-006f: SET TIME! [ 1.756582] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763336] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767948] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776135] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781918] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790164] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799342] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806216] hub 1-0:1.0: USB hub found [ 1.810171] hub 1-0:1.0: 1 port detected [ 1.814567] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820341] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828451] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837451] hub 2-0:1.0: USB hub found [ 1.841419] hub 2-0:1.0: 1 port detected [ 1.847420] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881439] vdd_3v3: supplied by regen1 [ 1.918036] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935602] aic_dvdd_fixed: disabling [ 1.940353] Waiting for root device /dev/mmcblk0p1... [ 1.962375] mmc1: new high speed MMC card at address 0001 [ 1.968346] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.973232] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979569] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986435] mmcblk1: p1 [ 2.120308] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155336] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180556] hub 2-1:1.0: USB hub found [ 2.184535] hub 2-1:1.0: 4 ports detected [ 2.276579] hub 1-1:1.0: USB hub found [ 2.280565] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.717241] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724321] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750496] rtc-ds1307 2-006f: SET TIME! [ 1.756260] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763017] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767634] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775818] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781613] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789864] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799030] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805913] hub 1-0:1.0: USB hub found [ 1.809867] hub 1-0:1.0: 1 port detected [ 1.814273] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820054] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828174] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837188] hub 2-0:1.0: USB hub found [ 1.841159] hub 2-0:1.0: 1 port detected [ 1.847182] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881117] vdd_3v3: supplied by regen1 [ 1.919193] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937140] aic_dvdd_fixed: disabling [ 1.941865] Waiting for root device /dev/mmcblk0p1... [ 1.969010] mmc1: new high speed MMC card at address 0001 [ 1.974994] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.979853] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986197] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993062] mmcblk1: p1 [ 2.119997] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155022] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180285] hub 2-1:1.0: USB hub found [ 2.184264] hub 2-1:1.0: 4 ports detected [ 2.276306] hub 1-1:1.0: USB hub found [ 2.280291] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.173963] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.180830] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191208] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196061] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202363] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209228] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.218830] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228330] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235388] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283614] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.289913] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296791] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306379] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315890] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322933] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329056] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335362] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342216] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351809] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361306] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368346] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375049] vdd_3v3: supplied by regen1 [ 2.413668] hctosys: unable to open rtc device (rtc0) [ 2.418968] sr_init: No PMIC hook to init smartreflex [ 2.424477] sr_init: platform driver register failed for SR [ 2.471739] aic_dvdd_fixed: disabling [ 2.476005] ldousb: disabling [ 2.483655] Waiting for root device /dev/mmcblk0p1... [ 2.535291] mmc1: new high speed MMC card at address 0001 [ 2.543046] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548376] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555172] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563624] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.412835] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.487018] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.497130] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.571373] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.581480] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.655715] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.665820] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.740054] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.750167] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.824396] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.834504] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.908688] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.918796] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.993049] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.003161] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.077338] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.087446] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.161675] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.171783] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.246011] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.256145] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.330473] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.340577] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.414794] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.424896] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.499075] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.509182] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.583412] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.593519] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.667709] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.677812] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.752046] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.762149] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:02]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.078490] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.152504] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.162593] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.236577] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.246654] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.320636] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.330713] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.404692] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.414772] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.488753] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.498833] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.572820] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.582889] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.656874] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.666940] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.740919] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.750991] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.824969] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.835043] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.909025] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.919094] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.993080] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.003154] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.077136] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.087204] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.161187] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.171265] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.245242] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.255316] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.329299] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.339376] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.413354] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.423427] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:08]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.481075] Key type dns_resolver registered [ 2.487509] ThumbEE CPU extension supported. [ 2.491932] Registering SWP/SWPB emulation handler [ 2.524335] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.530488] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.540183] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.554430] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.561200] [drm] No driver support for vblank timestamp query. [ 2.576755] mmc1: new high speed MMC card at address 0001 [ 2.586974] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.595438] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.603820] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.612446] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.621305] mmcblk1: p1 [ 2.738221] Console: switching to colour frame buffer device 240x75 [ 2.825609] drm drm: fb0: frame buffer device [ 2.843785] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.853886] usb2_vbus: supplied by vdd-sys-5v0 [ 2.865579] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.871170] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.879931] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.893796] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.904037] hub 1-0:1.0: USB hub found [ 2.908037] hub 1-0:1.0: 1 port detected [ 2.918393] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.932734] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.994525] dvdd_ts: disabling [ 2.997629] usb1_vbus: disabling [ 3.000996] vdd_cam_1v8_reg: disabling [ 3.008323] Waiting for root device /dev/mmcblk0p1... [ 3.223774] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.202024] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.493761] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:01]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:02]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.479361] Key type dns_resolver registered [ 2.485784] ThumbEE CPU extension supported. [ 2.490207] Registering SWP/SWPB emulation handler [ 2.541281] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.546614] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.554439] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.570684] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.577537] [drm] No driver support for vblank timestamp query. [ 2.595915] mmc1: new high speed MMC card at address 0001 [ 2.605006] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.612070] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.620576] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.629048] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.639995] mmcblk1: p1 [ 2.758743] Console: switching to colour frame buffer device 240x75 [ 2.845740] drm drm: fb0: frame buffer device [ 2.868741] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.878921] usb2_vbus: supplied by vdd-sys-5v0 [ 2.889697] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.895335] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.904269] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.918777] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.929153] hub 1-0:1.0: USB hub found [ 2.933164] hub 1-0:1.0: 1 port detected [ 2.944047] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.958098] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.020019] dvdd_ts: disabling [ 3.023121] usb1_vbus: disabling [ 3.026493] vdd_cam_1v8_reg: disabling [ 3.034211] Waiting for root device /dev/mmcblk0p1... [ 3.243780] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.200652] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.673744] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:01]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:02]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.648070] Bluetooth: RFCOMM ver 1.11 [ 2.652260] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.657662] Bluetooth: BNEP socket layer initialized [ 2.662755] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.668752] Bluetooth: HIDP socket layer initialized [ 2.675674] Key type dns_resolver registered [ 2.685368] Registering SWP/SWPB emulation handler [ 2.714479] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.719720] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.726942] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.749021] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.755809] [drm] No driver support for vblank timestamp query. [ 2.932765] Console: switching to colour frame buffer device 240x75 [ 3.019575] drm drm: fb0: frame buffer device [ 3.051029] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.058245] usb2_vbus: supplied by vdd-sys-5v0 [ 3.066669] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.072538] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.081668] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.101043] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.115048] hub 1-0:1.0: USB hub found [ 3.119093] hub 1-0:1.0: 1 port detected [ 3.132986] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.149127] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.243560] dvdd_ts: disabling [ 3.246666] usb1_vbus: disabling [ 3.249928] vdd_cam_1v8_reg: disabling [ 3.254733] ALSA device list: [ 3.257738] #0: NVIDIA Tegra Dalmore [ 3.263677] Waiting for root device /dev/mmcblk0p1... [ 3.440982] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.464474] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.130953] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.644873] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.652426] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.661346] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.692469] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.693654] usbcore: registered new interface driver usbhid [ 1.698883] usbhid: USB HID core driver [ 1.707654] NET: Registered protocol family 10 [ 1.708273] sit: IPv6 over IPv4 tunneling driver [ 1.711493] NET: Registered protocol family 17 [ 1.715525] NET: Registered protocol family 15 [ 1.719977] Key type dns_resolver registered [ 1.724306] Registering SWP/SWPB emulation handler [ 1.738173] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.738455] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.767987] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770247] max98090 1-0010: use default 2.8v micbias [ 1.776302] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.782048] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.782185] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.792255] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.804669] mmc1: new DDR MMC card at address 0001 [ 1.809719] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.813948] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.819757] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.825431] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.834668] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.841202] VDD10_HDMI_1.0V: disabling [ 1.841310] mmcblk1: p1 p2 [ 1.847213] vdd_g3d: disabling [ 1.850247] BUCK8_2.8V: disabling [ 1.85h232] ALSA device list: [ 1.855852] #0: Odroid-U3 [ 1.859572] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.119495] [<c077ba10>] (driver_register) from [<c0301e7c>] (do_one_initcall+0x90/0x1d4) [ 2.119502] [<c0301e7c>] (do_one_initcall) from [<c1100db0>] (kernel_init_freeable+0x158/0x1e8) [ 2.119509] [<c1100db0>] (kernel_init_freeable) from [<c0b50c0c>] (kernel_init+0x8/0x114) [ 2.119515] [<c0b50c0c>] (kernel_init) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.119520] Code: 3afffff6 e8bd8070 e30f3970 e34c3133 (e593200c) [ 2.119523] ---[ end trace cdf339da99418a6c ]--- [ 2.119580] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.119580] [ 2.119584] CPU1: stopping [ 2.119589] CPU: 1 PID: 46 Comm: kworker/1:1 Tainted: G D 4.6.0-rc7-00133-g90fa7c7 #1 [ 2.119590] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.119597] Workqueue: events_freezable mmc_rescan [ 2.119608] [<c031031c>] (unwind_backtrace) from [<c030b968>] (show_stack+0x10/0x14) [ 2.119614] [<c030b968>] (show_stack) from [<c058ba34>] (dump_stack+0x88/0x9c) [ 2.119620] [<c058ba34>] (dump_stack) from [<c030eac4>] (handle_IPI+0x16c/0x18c) [ 2.119624] [<c030eac4>] (handle_IPI) from [<c03017d4>] (gic_handle_irq+0x90/0x94) [ 2.119629] [<c03017d4>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 2.119631] Exception stack(0xee48fd50 to 0xee48fd98) [ 2.119634] fd40: ee705730 80000013 00000000 00000015 [ 2.119638] fd60: ee705700 317f0003 ee48fe6c 00000000 ee705730 c0d6b0c8 00000000 ee705700 [ 2.119641] fd80: 00000000 ee48fda0 c09bb3b4 c0b55c18 60000013 ffffffff [ 2.119652] [<c030c494>] (__irq_svc) from [<c0b55c18>] (_raw_spin_unlock_irqrestore+0x1c/0x20) [ 2.119658] [<c0b55c18>] (_raw_spin_unlock_irqrestore) from [<c09bb3b4>] (omap_hsmmc_start_command+0x74/0x150) [ 2.119664] [<c09bb3b4>] (omap_hsmmc_start_command) from [<c09bc8d8>] (omap_hsmmc_request+0xb8/0x50c) [ 2.119669] [<c09bc8d8>] (omap_hsmmc_request) from [<c099df34>] (mmc_wait_for_req_done+0x84/0x110) [ 2.119673] [<c099df34>] (mmc_wait_for_req_done) from [<c099e044>] (mmc_wait_for_cmd+0x64/0x84) [ 2.119680] [<c099e044>] (mmc_wait_for_cmd) from [<c09a82f4>] (mmc_send_io_op_cond+0x74/0xd4) [ 2.119687] [<c09a82f4>] (mmc_send_io_op_cond) from [<c09a7e34>] (mmc_attach_sdio+0x2c/0x344) [ 2.119691] [<c09a7e34>] (mmc_attach_sdio) from [<c09a0568>] (mmc_rescan+0x27c/0x348) [ 2.119698] [<c09a0568>] (mmc_rescan) from [<c0356718>] (process_one_work+0x1ec/0x410) [ 2.119704] [<c0356718>] (process_one_work) from [<c0357384>] (worker_thread+0x38/0x594) [ 2.119711] [<c0357384>] (worker_thread) from [<c035c140>] (kthread+0xdc/0xf4) [ 2.119717] [<c035c140>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 3.064042] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.064042]
[PYBOOT] [omap5uevm 00:51]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:53]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.254134] bde0: 00000002 00000000 00000000 7fffffff ee05be04 c0b52790 7fffffff ee05a000 [ 2.262694] be00: 00000000 c0b55190 2ddd1000 ee06c000 eefd92c0 eefd92c0 2ddd1000 c12082c0 [ 2.271243] be20: eefd92c0 00000001 ee05be3c ee05beb0 ee65bb00 ee65bb09 c113ee10 c059624c [ 2.279802] be40: 00000000 ffffff05 ffff0a00 c0ee0a5a ee06c000 c03636bc ee65bb00 c0ee0a58 [ 2.288363] be60: ee05befc ee65bb09 c0ee0a5a 00000002 ee05be88 c059659c ffffff05 ffff0a00 [ 2.296925] be80: 00000009 ee65bb00 ffffff05 ffff0a00 00000000 ee05bef8 00000008 c0ee0a58 [ 2.305485] bea0: 00000009 ee65bb00 c059816c 00000008 00000000 c05980a4 ee05beb8 ee05beb8 [ 2.314048] bec0: 00000118 ee05bef8 c144fcf4 c1410000 c1410000 c1203224 c113ee10 00000000 [ 2.322608] bee0: 00000118 c059816c c1306890 ee05bef8 c0301e20 c0ee0a58 c113ee10 ee05a000 [ 2.331174] bf00: efffc480 00000000 efffc488 00000021 00000000 ee05bf30 c035b568 c035b730 [ 2.339735] bf20: c101e854 c0c1ceac 00000118 c035b858 c0eca0f8 c101d274 00000000 00000007 [ 2.348296] bf40: 00000007 c0ee0748 c1336584 c1410000 c1410000 c1410000 c1410000 c1203224 [ 2.356854] bf60: c11a3838 c11a383c 00000118 c1100db0 00000007 00000007 00000000 c11005ac [ 2.365423] bf80: 00000000 00000000 c0b50c04 00000000 00000000 00000000 00000000 00000000 [ 2.373986] bfa0: 00000000 c0b50c0c 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.382543] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.391106] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 4899c0c5 e9d998e8 [ 2.399672] [<c03ae634>] (get_symbol_pos) from [<c03aed08>] (kallsyms_lookup+0x40/0xbc) [ 2.408052] [<c03aed08>] (kallsyms_lookup) from [<c03aedb4>] (__sprint_symbol+0x30/0xcc) [ 2.416521] [<c03aedb4>] (__sprint_symbol) from [<c0593e30>] (symbol_string+0x44/0x80) [ 2.424811] [<c0593e30>] (symbol_string) from [<c059624c>] (pointer+0x3d0/0x544) [ 2.432548] [<c059624c>] (pointer) from [<c059659c>] (vsnprintf+0x1dc/0x458) [ 2.439925] [<c059659c>] (vsnprintf) from [<c05980a4>] (kvasprintf+0x60/0x9c) [ 2.447401] [<c05980a4>] (kvasprintf) from [<c059816c>] (kasprintf+0x1c/0x2c) [ 2.454875] [<c059816c>] (kasprintf) from [<c0301e20>] (do_one_initcall+0x34/0x1d4) [ 2.462901] [<c0301e20>] (do_one_initcall) from [<c1100db0>] (kernel_init_freeable+0x158/0x1e8) [ 2.472009] [<c1100db0>] (kernel_init_freeable) from [<c0b50c0c>] (kernel_init+0x8/0x114) [ 2.480577] [<c0b50c0c>] (kernel_init) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.488506] Code: e5935000 e1a04007 ea000005 e08c30a3 (e796e103) [ 2.494948] ---[ end trace 4611ab13d6e8ed7c ]--- [ 2.499796] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.499796] [ 3.486307] SMP: failed to stop secondary CPUs [ 3.490952] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.490952]
[PYBOOT] [omap5uevm 00:49]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:50]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.656397] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.670908] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.677418] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.682889] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.690847] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.733618] mmc2: switch to bus width 8 failed [ 1.738467] mmc2: switch to bus width 4 failed [ 1.738796] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.748876] mmc2: new high speed MMC card at address 0001 [ 1.749335] hub 3-0:1.0: USB hub found [ 1.749395] hub 3-0:1.0: 1 port detected [ 1.754938] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.754942] [drm] No driver support for vblank timestamp query. [ 1.791409] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.796847] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.797165] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.798767] mmcblk2: p3 [ 1.801031] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.809139] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.812041] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.819587] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.839273] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.846369] mmc0: new SDIO card at address 0001 [ 1.855238] Console: switching to colour frame buffer device 170x48 [ 1.931358] drm drm: fb0: frame buffer device [ 1.948775] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.955933] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.963685] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.977838] vdd_1v5: disabling [ 1.980919] vdd_1v2: disabling [ 2.623216] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.634610] Waiting for root device /dev/mmcblk0p3... [ 58.473844] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:53]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.625690] Bluetooth: RFCOMM ver 1.11 [ 1.629576] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.634966] Bluetooth: BNEP socket layer initialized [ 1.639956] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.645911] Bluetooth: HIDP socket layer initialized [ 1.651430] Key type dns_resolver registered [ 1.656778] Registering SWP/SWPB emulation handler [ 1.671471] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.678188] VDDIO_HDMI: supplied by vdd_5v0 [ 1.682658] vdd_sys: supplied by vdd_5v0 [ 1.686662] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.691645] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.698188] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.708622] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.715083] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.721118] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.729080] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.748504] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.756583] hub 3-0:1.0: USB hub found [ 1.760389] hub 3-0:1.0: 1 port detected [ 1.771153] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.777754] [drm] No driver support for vblank timestamp query. [ 1.843125] Console: switching to colour frame buffer device 170x48 [ 1.863392] drm drm: fb0: frame buffer device [ 1.888494] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.895615] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.903207] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.922163] vdd_1v5: disabling [ 1.925215] vdd_1v2: disabling [ 1.928391] ALSA device list: [ 1.931377] #0: NVIDIA Tegra Seaboard [ 2.308950] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.320165] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.938018] ledtrig-cpu: registered to indicate activity on CPUs [ 1.945556] usbcore: registered new interface driver usbhid [ 1.951232] usbhid: USB HID core driver [ 1.975372] NET: Registered protocol family 10 [ 1.982299] sit: IPv6 over IPv4 tunneling driver [ 1.987579] NET: Registered protocol family 17 [ 1.992034] can: controller area network core (rev 20120528 abi 9) [ 1.998291] NET: Registered protocol family 29 [ 2.002777] can: raw protocol (rev 20120528) [ 2.007049] can: broadcast manager protocol (rev 20120528 t) [ 2.012725] can: netlink gateway (rev 20130117) max_hops=1 [ 2.018829] Key type dns_resolver registered [ 2.023254] ThumbEE CPU extension supported. [ 2.027557] Registering SWP/SWPB emulation handler [ 2.028930] mmc3: new high speed MMC card at address 0001 [ 2.029449] mmcblk3: mmc3:0001 3.53 GiB [ 2.029632] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.029815] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.029998] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.033386] mmcblk3: p1 p2 p3 p4 [ 2.063629] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.070404] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.079620] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.086639] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.093627] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.100616] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.113891] db8500-esram12: disabling [ 2.117797] db8500-esram34: disabling [ 2.121734] V-CSI/DSI: disabling [ 2.125030] mmci-reg: disabling [ 2.128662] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.134674] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.140991] Waiting for root device /dev/mmcblk0p4...
[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:03]: got exception: timeout ~$off
[PYBOOT] [snowball 02:04]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.579345] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.589294] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.600006] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.623413] NET: Registered protocol family 10 [ 2.628662] sit: IPv6 over IPv4 tunneling driver [ 2.634277] NET: Registered protocol family 17 [ 2.638763] NET: Registered protocol family 35 [ 2.643310] NET: Registered protocol family 37 [ 2.647888] Registering SWP/SWPB emulation handler [ 2.654235] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.660369] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.667022] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.674499] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-24 13:59:20 UTC (956584760) [ 2.683837] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.690826] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.697875] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.704895] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.718475] db8500-esram12: disabling [ 2.722351] db8500-esram34: disabling [ 2.726257] V-CSI/DSI: disabling [ 2.729522] mmci-reg: disabling [ 2.732849] ALSA device list: [ 2.735839] #0: MOP500-card [ 2.739166] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.745178] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.751373] Waiting for root device /dev/mmcblk0p4... [ 68.691253] random: nonblocking pool is initialized cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:57]: got exception: timeout ~$off
[PYBOOT] [snowball 01:58]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 19.779870] mmcblk0: error -110 sending status command, retrying [ 19.788328] mmcblk0: error -110 sending status command, aborting INIT: INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes [ 19.850325] mmcblk0: error -110 sending status command, retrying [ 19.858849] mmcblk0: error -110 sending status command, retrying [ 19.867357] mmcblk0: error -110 sending status command, aborting [ 19.878395] mmcblk0: error -110 sending status command, retrying [ 19.886819] mmcblk0: error -110 sending status command, retrying [ 19.895240] mmcblk0: error -110 sending status command, aborting [ 19.906240] mmcblk0: error -110 sending status command, retrying [ 19.914715] mmcblk0: error -110 sending status command, retrying [ 19.923137] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin[ 19.939742] mmcblk0: error -110 sending status command, retrying /getty" INIT: Id "S1" respawni[ 19.948602] mmcblk0: error -110 sending status command, retrying ng too fast: disabled for 5 minut[ 19.957517] mmcblk0: error -110 sending status command, aborting es [ 19.968868] mmcblk0: error -110 sending status command, retrying [ 19.977384] mmcblk0: error -110 sending status command, retrying [ 19.985810] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.865068] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 03:00]: got exception: timeout ~$off
[PYBOOT] [wandboard 03:01]: Done.