Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

queue boot: 24 passed 4 failed (queue/v3.12.17)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 1:34.36 omap5uevm omap2plus_defconfig : FAILED 1:29.44 omap5uevm multi_v7_defconfig : FAILED 1:11.35 omap5uevm multi_lpae_defconfig : FAILED 1:09.39 Successful boards: arndale exynos_defconfig : passed 1:04.42 beaver tegra_defconfig : passed 0:56.24 beaver multi_v7_defconfig : passed 0:40.51 capri bcm_defconfig : passed 0:41.63 capri multi_v7_defconfig : passed 0:42.01 cubie multi_v7_defconfig : passed 1:06.23 cubie2 multi_v7_defconfig : passed 0:59.55 cubie2 multi_lpae_defconfig : passed 1:08.81 cubox dove_defconfig : passed 1:00.58 dalmore tegra_defconfig : passed 1:21.11 dalmore multi_v7_defconfig : passed 1:02.15 dalmore multi_lpae_defconfig : passed 0:59.06 panda omap2plus_defconfig : passed 1:14.49 panda multi_v7_defconfig : passed 1:15.01 sama5 sama5_defconfig : passed 1:48.61 seaboard tegra_defconfig : passed 1:01.72 seaboard multi_v7_defconfig : passed 0:54.62 snow exynos_defconfig : passed 1:25.99 snowball u8500_defconfig : passed 1:28.36 snowball multi_v7_defconfig : passed 0:51.34 trimslice tegra_defconfig : passed 0:55.87 trimslice multi_v7_defconfig : passed 0:46.22 wandboard imx_v6_v7_defconfig : passed 0:57.32 wandboard multi_v7_defconfig : passed 0:49.52 Offline boards: bbb omap2plus_defconfig : OFFLINE 0:47.23 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.244991] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.245759] mop500-uib: failed to get adapter i2c2 [ 0.262172] NFS: Registering the id_resolver key type [ 0.262287] Key type id_resolver registered [ 0.262300] Key type id_legacy registered [ 0.262696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.262714] io scheduler noop registered [ 0.262726] io scheduler deadline registered [ 0.262971] io scheduler cfq registered (default) [ 0.263829] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.341101] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.342976] Serial: IMX driver [ 0.343935] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.935857] console [ttyO0] enabled [ 0.940686] serial: Freescale lpuart driver [ 0.945471] [drm] Initialized drm 1.1.0 20060810 [ 0.952410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.959299] ehci-platform: EHCI generic platform driver [ 0.964967] ehci-omap: OMAP-EHCI Host Controller driver [ 0.970597] ehci-orion: EHCI orion driver [ 0.974911] SPEAr-ehci: EHCI SPEAr driver [ 0.979233] tegra-ehci: Tegra EHCI driver [ 0.983842] usbcore: registered new interface driver usb-storage [ 0.991694] mousedev: PS/2 mouse device common for all mice [ 0.998886] sdhci: Secure Digital Host Controller Interface driver [ 1.005494] sdhci: Copyright(c) Pierre Ossman [ 1.010522] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.017476] usbcore: registered new interface driver usbhid [ 1.023404] usbhid: USB HID core driver [ 1.027854] TCP: cubic registered [ 1.032271] NET: Registered protocol family 10 [ 1.038011] sit: IPv6 over IPv4 tunneling driver [ 1.044019] Key type dns_resolver registered [ 1.048721] Registering SWP/SWPB emulation handler [ 1.054598] regulator-dummy: disabling [ 1.059930] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.066015] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.076102] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x81000000 queue/v3.12.17/multi_lpae_defconfig/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.132 Filename 'queue/v3.12.17/multi_lpae_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################## 2.4 MiB/s done Bytes transferred = 3584544 (36b220 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.17/multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.17/multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.132 Filename 'queue/v3.12.17/multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *## 642.6 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x36b220 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x81000000 queue/v3.12.17/multi_v7_defconfig/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.132 Filename 'queue/v3.12.17/multi_v7_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################# 2.4 MiB/s done Bytes transferred = 3567936 (367140 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.17/multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.17/multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.132 Filename 'queue/v3.12.17/multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *## 868.2 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x367140 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.132 Filename 'queue/v3.12.17/omap2plus_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################### 2.3 MiB/s done Bytes transferred = 4170648 (3fa398 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.17/omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.17/omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.132 Filename 'queue/v3.12.17/omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *## 186.5 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x3fa398 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 7 months

queue build: 17 warnings 0 failures (queue/v3.12.17)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 2acf1c2 Linux 3.12.17 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.17/ Runtime: 34m 10s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 7 months

mainline boot: 43 pass, 1 fail (v3.14-11030-ga7963eb)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-11030-ga7963eb Failed boot tests (console logs at the end) =========================================== bcm28155-ap: FAIL: bcm_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 52.9 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 0.6 sec: PASS legacy,3530beagle 0 min 34.5 sec: PASS (Warnings: 1) omap4-panda 1 min 8.9 sec: PASS omap3-overo-tobi 0 min 23.4 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 29.9 sec: PASS omap5-uevm 1 min 1.8 sec: PASS (Warnings: 1) omap4-panda-es 1 min 13.7 sec: PASS legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 35.4 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.2 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.7 sec: PASS sun4i-a10-cubieboard 0 min 13.0 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 45.0 sec: FAIL mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 30.0 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.7 sec: PASS tegra30-beaver 0 min 17.3 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 54.2 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 53.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 14.2 sec: PASS bcm28155-ap 0 min 21.3 sec: PASS omap3-overo-tobi 0 min 25.5 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.9 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap5-uevm 1 min 37.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.9 sec: PASS omap4-panda-es 0 min 53.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.1 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS Console logs for failures ========================= bcm_defconfig ------------- bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- Boot2 starts main image at 0xae000000 ... U-Boot 2013.01 (Nov 12 2013 - 15:29:56) I2C: ready DRAM: 768 MiB WARNING: Caches not enabled Relocation Offset is: 11f84000 MMC: KONA SD/MMC: 0, KONA SD/MMC: 1 kona_mmc_send_cmd: waiting for status update kona_mmc_send_cmd: waiting for status update In: serial Out: serial Err: serial Disabling watchdog Hit any key to stop autoboot: 1 0 capri> capri> version version U-Boot 2013.01 (Nov 12 2013 - 15:29:56) arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-2012.08-20120827 - Linaro GCC 2012.08) 4.7.2 20120731 (prerelease) GNU ld (crosstool-NG linaro-1.13.1-2012.08-20120827 - Linaro GCC 2012.08) 2.22 capri> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi capri> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi capri> fastboot ~$fastboot tmp/capri-moZf10/zImage tmp/capri-moZf10/bcm28155-ap.dtb None fastboot Adding: abi, offset 0x00000100, size 0x0000000000020000, flags 0x00000000 Adding: loader, offset 0x00000300, size 0x0000000000020000, flags 0x00000000 Adding: u-boot, offset 0x00011000, size 0x0000000000100000, flags 0x00000000 Adding: hw-blob, offset 0x00011800, size 0x0000000000040000, flags 0x00000000 Adding: u-boot-env, offset 0x00011a00, size 0x0000000000001000, flags 0x00000000 Adding: de Command(capri console)> fastboot tmp/capri-moZf10/zImage tmp/capri-moZf10/bcm28155-ap.dtb Nonevice-tree, offset 0x00011a80, size 0x0000000000020000, flags 0x00000000 Adding: kernel, offset 0x0001c000, size 0x0000000001000000, flags 0x00000000 Adding: file-system, offset 0x00024000, size 0x00000000a0000000, flags 0x00000000 Adding: initrd, offset 0x00524000, size 0x0000000002000000, flags 0x00000000 (user:khilman) fastboot capri eS Su USB speed: High GET_DESC ->DEVICE DESC eS USB speed: High GET_DESC ->DEVICE DESC GET_DESC ->CONFIG DESC GET_DESC ->CONFIG DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC SET_CONFIG GET_DESC ->STRING DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC TFTP: download kernel (tmp/capri-BA14WM/zImage) to /tmp/kernel-8AxHqM TFTP: download dtb (tmp/capri-BA14WM/bcm28155-ap.dtb) to /tmp/dtb-kQzQBz Deleting /tmp/kernel-8AxHqM Deleting /tmp/dtb-kQzQBz MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004d96 Starting kernel ... < waiting for device > ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 45.00 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

mainline boot: 16 passed 17 failed (mainline/v3.14-11030-ga7963eb)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:05.21 beaver multi_v7_defconfig : FAILED 2:57.54 capri multi_v7_defconfig : FAILED 2:58.15 cubie multi_v7_defconfig : FAILED 2:57.27 cubie2 sunxi_defconfig : FAILED 1:21.89 cubie2 multi_v7_defconfig : FAILED 3:10.92 cubie2 multi_lpae_defconfig : FAILED 2:53.61 dalmore multi_v7_defconfig : FAILED 3:03.79 dalmore multi_lpae_defconfig : FAILED 3:01.93 hummingboard multi_v7_defconfig : FAILED 1:05.15 omap5uevm multi_v7_defconfig : FAILED 3:51.55 omap5uevm multi_lpae_defconfig : FAILED 3:49.07 panda multi_v7_defconfig : FAILED 3:09.04 seaboard multi_v7_defconfig : FAILED 3:02.83 snowball multi_v7_defconfig : FAILED 1:10.22 trimslice multi_v7_defconfig : FAILED 0:36.87 wandboard multi_v7_defconfig : FAILED 1:05.69 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:21.54 arndale exynos_defconfig : passed 1:11.97 bbb omap2plus_defconfig : passed 1:41.23 beaver tegra_defconfig : passed 0:55.49 capri bcm_defconfig : passed 0:43.41 cubie sunxi_defconfig : passed 0:53.56 dalmore tegra_defconfig : passed 1:24.78 hummingboard imx_v6_v7_defconfig : passed 1:26.49 omap5uevm omap2plus_defconfig : warnings 1:11.14 panda omap2plus_defconfig : passed 1:18.23 sama5 sama5_defconfig : passed 1:51.61 seaboard tegra_defconfig : passed 1:01.68 snow exynos_defconfig : passed 1:31.63 snowball u8500_defconfig : passed 1:44.47 trimslice tegra_defconfig : passed 0:59.55 wandboard imx_v6_v7_defconfig : passed 0:56.43 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.236356] gspca_main: v2.14.0 registered [ 1.242663] sdhci: Secure Digital Host Controller Interface driver [ 1.249191] sdhci: Copyright(c) Pierre Ossman [ 1.254944] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.296723] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.336755] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.343607] usbcore: registered new interface driver usbhid [ 1.349511] usbhid: USB HID core driver [ 1.358567] TCP: cubic registered [ 1.362072] NET: Registered protocol family 17 [ 1.367144] Key type dns_resolver registered [ 1.372572] ThumbEE CPU extension supported. [ 1.377162] Registering SWP/SWPB emulation handler [ 1.382202] PJ4 iWMMXt coprocessor enabled. [ 1.394555] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.449429] mmc1: BKOPS_EN bit is not set [ 1.456092] mmc1: new high speed MMC card at address 0001 [ 1.462523] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.467543] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.473958] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.480968] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.487652] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.495051] libphy: 4a101000.mdio: probed [ 1.499382] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.509125] Detected MACID = bc:6a:29:7a:42:a8 [ 1.515369] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.529490] ALSA device list: [ 1.532628] No soundcards found. [ 1.537548] mmcblk0: p1 p2 [ 1.543368] mmcblk0boot1: unknown partition table [ 1.550436] mmcblk0boot0: unknown partition table [ 1.557602] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.567377] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.626996] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.635574] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.662368] devtmpfs: mounted [ 1.666544] Freeing unused kernel memory: 556K (c0a68000 - c0af3000) [ 1.741322] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.660329] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.666414] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.674159] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.681242] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.686838] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.693213] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.703205] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.712691] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.719318] [drm] No driver support for vblank timestamp query. [ 3.725273] host1x drm: No connectors reported connected with modes [ 3.731529] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.749699] Console: switching to colour frame buffer device 128x48 [ 3.761641] host1x drm: fb0: frame buffer device [ 3.766350] host1x drm: registered panic notifier [ 3.771047] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.777246] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.784623] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.795971] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.801368] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.809166] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.833063] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.839436] hub 1-0:1.0: USB hub found [ 3.843213] hub 1-0:1.0: 1 port detected [ 3.847546] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.852941] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.860746] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.883061] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.889339] hub 2-0:1.0: USB hub found [ 3.893119] hub 2-0:1.0: 1 port detected [ 3.901021] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.913731] ALSA device list: [ 3.916697] #0: NVIDIA Tegra Beaver [ 3.922846] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.931765] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.946658] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.954779] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.981201] devtmpfs: mounted [ 3.984632] Freeing unused kernel memory: 556K (c0a68000 - c0af3000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a68000 - c0af3000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07ce0cc>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 29042 Comm: %s [ 1.050000] Not tainted 3.14.0-11030-ga7963eb #1 [ 1.050000] task: c09a5e80 ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07ce0d0>] lr : [<c027cfb4>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0b00390 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09a5e80 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process %s [ 1.050000] (pid: 29042, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07ce0d0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace 3d6c04e44c94e282 ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07ce0cc>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.968850] usbcore: registered new interface driver usb-storage [ 0.975969] mousedev: PS/2 mouse device common for all mice [ 0.982842] i2c /dev entries driver [ 0.987973] usbcore: registered new interface driver uvcvideo [ 0.993786] USB Video Class driver (1.1.1) [ 0.997879] gspca_main: v2.14.0 registered [ 1.004768] sdhci: Secure Digital Host Controller Interface driver [ 1.010943] sdhci: Copyright(c) Pierre Ossman [ 1.015666] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.021784] usbcore: registered new interface driver usbhid [ 1.027372] usbhid: USB HID core driver [ 1.033799] TCP: cubic registered [ 1.037121] NET: Registered protocol family 17 [ 1.041730] Key type dns_resolver registered [ 1.046153] ThumbEE CPU extension supported. [ 1.050440] Registering SWP/SWPB emulation handler [ 1.055242] PJ4 iWMMXt coprocessor enabled. [ 1.060510] ahci-5v: 5000 mV [ 1.063979] usb1-vbus: 5000 mV [ 1.067482] usb2-vbus: 5000 mV [ 1.071148] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.078979] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.086634] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.100025] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.107897] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 3.432768] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.452753] Sending DHCP requests ., OK [ 3.473194] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.171 [ 3.480961] IP-Config: Complete: [ 3.484222] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.171, mask=255.255.255.0, gw=172.16.1.1 [ 3.494231] host=172.16.1.171, domain=lixom.net, nis-domain=(none) [ 3.500837] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.507366] nameserver0=172.16.1.1 [ 3.511489] ALSA device list: [ 3.514471] No soundcards found. [ 3.523213] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.529430] devtmpfs: mounted [ 3.533016] Freeing unused kernel memory: 556K (c0a68000 - c0af3000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 3.339669] ., OK [ 3.360130] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.107 [ 3.367945] IP-Config: Complete: [ 3.371217] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.107, mask=255.255.255.0, gw=172.16.1.1 [ 3.381215] host=172.16.1.107, domain=lixom.net, nis-domain=(none) [ 3.387820] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.394351] nameserver0=172.16.1.1 [ 3.398487] ALSA device list: [ 3.401469] No soundcards found. [ 3.410635] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.416932] devtmpfs: mounted [ 3.420554] Freeing unused kernel memory: 560K (c0a6f000 - c0afb000) [ 3.444104] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.450907] Alignment trap: not handling instruction e1923f9f at [<c07d4f3c>] [ 3.458037] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 3.464555] Internal error: : 221 [#2] SMP ARM [ 3.468994] Modules linked in: [ 3.472063] CPU: 0 PID: 29042 Comm: %s [ 3.472063] Not tainted 3.14.0-11030-ga7963eb #1 [ 3.480586] task: c09ace8c ti: ea03e000 task.ti: 70737573 [ 3.485987] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.491037] LR is at __down_read_trylock+0x14/0x54 [ 3.495823] pc : [<c07d4f40>] lr : [<c027dd08>] psr: 40000193 [ 3.495823] sp : ea03ffb8 ip : c0b083e8 fp : ea0400a0 [ 3.507282] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.512500] r7 : c09ace8c r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 3.519017] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.525536] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.532747] Control: 30c5387d Table: 6a3ed500 DAC: fffffffd [ 3.538483] Process %s [ 3.538483] (pid: 29042, stack limit = 0x707377c3) [ 3.545783] Stack: (0xea03ffb8 to 0x70739573) [ 3.550152] [<c07d4f40>] (_raw_spin_lock_irqsave) from [<c027dd08>] (__down_read_trylock+0x14/0x54) [ 3.559195] [<c027dd08>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 3.567538] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.573625] ---[ end trace e7ea9a9fa14f3c8d ]--- [ 3.578239] Alignment trap: not handling instruction e1923f9f at [<c07d4f3c>] [ 3.585363] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 9.969900] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.107 [ 9.977735] IP-Config: Complete: [ 9.981012] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.107, mask=255.255.255.0, gw=172.16.1.1 [ 9.991013] host=172.16.1.107, domain=lixom.net, nis-domain=(none) [ 9.997618] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 10.004147] nameserver0=172.16.1.1 [ 10.008285] ALSA device list: [ 10.011266] No soundcards found. [ 10.020348] VFS: Mounted root (nfs filesystem) on device 0:11. [ 10.026671] devtmpfs: mounted [ 10.030287] Freeing unused kernel memory: 556K (c0a68000 - c0af3000) [ 10.054014] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 10.060826] Alignment trap: not handling instruction e1923f9f at [<c07ce0cc>] [ 10.067953] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 10.074470] Internal error: : 1 [#2] SMP ARM [ 10.078734] Modules linked in: [ 10.081805] CPU: 0 PID: 29042 Comm: %s [ 10.081805] Not tainted 3.14.0-11030-ga7963eb #1 [ 10.090331] task: c09a5e80 ti: ea03c000 task.ti: 70737573 [ 10.095733] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 10.100785] LR is at __down_read_trylock+0x14/0x54 [ 10.105571] pc : [<c07ce0d0>] lr : [<c027cfb4>] psr: 40000193 [ 10.105571] sp : ea03df18 ip : c0b00390 fp : ea03e000 [ 10.117031] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 10.122240] r7 : c09a5e80 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 10.128756] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 10.135275] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 10.142486] Control: 10c5387d Table: 6a47806a DAC: 00000015 [ 10.148223] Process %s [ 10.148223] (pid: 29042, stack limit = 0x707377c3) [ 10.155522] Stack: (0xea03df18 to 0x70739573) [ 10.159894] [<c07ce0d0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 10.168937] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 10.177283] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 10.184932] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 10.191020] ---[ end trace c1f8f78397d8a44e ]--- [ 10.195633] Alignment trap: not handling instruction e1923f9f at [<c07ce0cc>] [ 10.202756] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017704] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017729] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017743] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017763] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017775] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018728] Switched to clocksource arch_sys_counter [ 0.025696] NET: Registered protocol family 2 [ 0.026160] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026249] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026369] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026451] TCP: reno registered [ 0.026467] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026522] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026721] NET: Registered protocol family 1 [ 0.027108] RPC: Registered named UNIX socket transport module. [ 0.027122] RPC: Registered udp transport module. [ 0.027128] RPC: Registered tcp transport module. [ 0.027134] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028090] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028552] bounce pool size: 64 pages [ 0.036335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036352] io scheduler noop registered [ 0.036360] io scheduler deadline registered [ 0.036539] io scheduler cfq registered (default) [ 0.038182] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.079171] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.081595] console [ttyS0] disabled [ 0.101791] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.616844] console [ttyS0] enabled [ 0.621550] mousedev: PS/2 mouse device common for all mice [ 0.627372] i2c /dev entries driver [ 0.632199] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.641189] TCP: cubic registered [ 0.644512] NET: Registered protocol family 17 [ 0.649076] Registering SWP/SWPB emulation handler [ 0.654779] ahci-5v: 5000 mV [ 0.658003] usb1-vbus: 5000 mV [ 0.661421] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.746633] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.759634] TCP: cubic registered [ 2.763048] NET: Registered protocol family 17 [ 2.768158] Key type dns_resolver registered [ 2.774231] ThumbEE CPU extension supported. [ 2.778554] Registering SWP/SWPB emulation handler [ 2.783414] PJ4 iWMMXt coprocessor enabled. [ 2.794444] dvdd_ts: 1800 mV [ 2.799103] usb1_vbus: 5000 mV [ 2.802634] usb1_vbus: supplied by vdd-sys-5v0 [ 2.808593] usb2_vbus: 5000 mV [ 2.811921] usb2_vbus: supplied by vdd-sys-5v0 [ 2.818089] vdd_hdmi_5v0: 5000 mV [ 2.821684] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.831327] vdd_cam_1v8_reg: 1800 mV [ 2.849415] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.856179] [drm] No driver support for vblank timestamp query. [ 2.983581] Console: switching to colour frame buffer device 240x75 [ 3.069033] host1x drm: fb0: frame buffer device [ 3.073870] host1x drm: registered panic notifier [ 3.078634] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.086342] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.098124] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.103720] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.114568] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.132506] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.141968] hub 1-0:1.0: USB hub found [ 3.146028] hub 1-0:1.0: 1 port detected [ 3.155426] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.167430] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.210494] ALSA device list: [ 3.213557] #0: NVIDIA Tegra Dalmore [ 3.221667] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.231596] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.275360] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.283672] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.299550] devtmpfs: mounted [ 3.304316] Freeing unused kernel memory: 560K (c0a6f000 - c0afb000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.745483] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.758454] TCP: cubic registered [ 2.761805] NET: Registered protocol family 17 [ 2.766995] Key type dns_resolver registered [ 2.773065] ThumbEE CPU extension supported. [ 2.777388] Registering SWP/SWPB emulation handler [ 2.782248] PJ4 iWMMXt coprocessor enabled. [ 2.793167] dvdd_ts: 1800 mV [ 2.797458] usb1_vbus: 5000 mV [ 2.800767] usb1_vbus: supplied by vdd-sys-5v0 [ 2.806590] usb2_vbus: 5000 mV [ 2.809890] usb2_vbus: supplied by vdd-sys-5v0 [ 2.815703] vdd_hdmi_5v0: 5000 mV [ 2.819266] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.828929] vdd_cam_1v8_reg: 1800 mV [ 2.846535] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.853293] [drm] No driver support for vblank timestamp query. [ 2.972469] Console: switching to colour frame buffer device 240x75 [ 3.057861] host1x drm: fb0: frame buffer device [ 3.062753] host1x drm: registered panic notifier [ 3.067543] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.075440] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.087021] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.092641] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.103711] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.122281] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.131436] hub 1-0:1.0: USB hub found [ 3.135498] hub 1-0:1.0: 1 port detected [ 3.144503] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.156448] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.199260] ALSA device list: [ 3.202321] #0: NVIDIA Tegra Dalmore [ 3.210008] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.220783] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.261671] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.270042] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.286029] devtmpfs: mounted [ 3.290676] Freeing unused kernel memory: 556K (c0a68000 - c0af3000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot > tftp 0x10800000 mainline/v3.14-11030-ga7963eb/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.14-11030-ga7963eb/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-11030-ga7963eb/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2 MiB/s done Bytes transferred = 4637696 (46c400 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 mainline/v3.14-11030-ga7963eb/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 mainline/v3.14-11030-ga7963eb/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-11030-ga7963eb/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 643.6 KiB/s done Bytes transferred = 25705 (6469 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46c400 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009468 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 46.730931] smps9: 2100 mV [ 46.734739] smps10_out2: 5000 mV [ 46.738959] smps10_out1: 5000 mV [ 46.742820] ldo1: 1500 <--> 1800 mV [ 46.747405] ldo2: 2800 mV [ 46.751743] ldo3: 1500 mV [ 46.755186] ldo4: 1500 <--> 1800 mV [ 46.760434] ldo5: 1800 mV [ 46.766261] ldo6: 1200 mV [ 46.769952] ldo7: 2000 mV [ 46.774301] ldo8: 3000 mV [ 46.778494] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.784647] ldoln: 1800 mV [ 46.789064] ldousb: 3250 mV [ 46.792560] REGEN1: no parameters [ 46.796118] REGEN2: no parameters [ 46.799810] regen3: no parameters [ 46.803601] SYSEN1: no parameters [ 46.807150] SYSEN2: no parameters [ 47.050269] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.057372] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.063622] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.071549] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.110339] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.123674] ALSA device list: [ 47.126776] No soundcards found. [ 47.130886] Waiting for root device /dev/mmcblk1p2... [ 47.146840] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.157050] mmc2: new high speed SDHC card at address 0001 [ 47.163016] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.168481] mmcblk1: p1 p2 [ 47.240508] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.249325] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.272329] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.280795] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.290512] devtmpfs: mounted [ 47.293879] Freeing unused kernel memory: 560K (c0a6f000 - c0afb000) [ 47.328131] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.617213] smps9: 2100 mV [ 47.621039] smps10_out2: 5000 mV [ 47.625254] smps10_out1: 5000 mV [ 47.629109] ldo1: 1500 <--> 1800 mV [ 47.633697] ldo2: 2800 mV [ 47.638027] ldo3: 1500 mV [ 47.641496] ldo4: 1500 <--> 1800 mV [ 47.646717] ldo5: 1800 mV [ 47.652568] ldo6: 1200 mV [ 47.656251] ldo7: 2000 mV [ 47.660565] ldo8: 3000 mV [ 47.664766] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.670923] ldoln: 1800 mV [ 47.675352] ldousb: 3250 mV [ 47.678842] REGEN1: no parameters [ 47.682417] REGEN2: no parameters [ 47.686098] regen3: no parameters [ 47.689896] SYSEN1: no parameters [ 47.693442] SYSEN2: no parameters [ 47.929299] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.936369] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.942613] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.950550] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.989376] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.002715] ALSA device list: [ 48.005815] No soundcards found. [ 48.009814] Waiting for root device /dev/mmcblk1p2... [ 48.025862] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.036081] mmc2: new high speed SDHC card at address 0001 [ 48.042040] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.047512] mmcblk1: p1 p2 [ 48.119517] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.128321] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.151337] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.159807] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.169527] devtmpfs: mounted [ 48.172893] Freeing unused kernel memory: 556K (c0a68000 - c0af3000) [ 48.206831] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.778869] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.783874] VDAC: 1800 mV [ 1.783874] VANA: 2100 mV [ 1.791168] VCXIO: 1800 mV [ 1.791168] VUSB: 3300 mV [ 1.798065] V1V8: 1800 mV [ 1.801666] V2V1: 2100 mV [ 1.807678] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.879211] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.090209] hub 1-1:1.0: USB hub found [ 2.094299] hub 1-1:1.0: 5 ports detected [ 2.149505] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.400421] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.449859] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.532165] smsc95xx v1.0.4 [ 2.600799] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 26:34:c5:dc:f9:bd [ 2.751739] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.758300] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.766784] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.829193] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.878601] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.889007] mmc0: new high speed SDHC card at address b368 [ 2.895111] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.901367] mmcblk0: p1 p2 [ 3.069396] gic_timer_retrigger: lost localtimer interrupt [ 3.132995] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.146972] ALSA device list: [ 3.150115] No soundcards found. [ 3.150146] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 3.163848] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.173339] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.188385] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.195465] mmc1: new SDIO card at address 0001 [ 3.195465] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.195465] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.204406] devtmpfs: mounted [ 3.204406] Freeing unused kernel memory: 556K (c0a68000 - c0af3000) [ 3.244201] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.950783] platform 54200000.dc: Driver tegra-dc requests probe deferral [ 1.953104] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.957298] mmc0: new SDIO card at address 0001 [ 1.969667] platform c5000000.usb: Driver tegra-ehci requests probe deferral [ 2.015186] tegra-ehci c5004000.usb: EHCI Host Controller [ 2.020619] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 2.028427] tegra-ehci c5004000.usb: irq 53, io mem 0xc5004000 [ 2.045054] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00 [ 2.051871] hub 1-0:1.0: USB hub found [ 2.055722] hub 1-0:1.0: 1 port detected [ 2.063147] tegra-ehci c5008000.usb: EHCI Host Controller [ 2.068593] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2 [ 2.076337] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 2.095044] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 2.101833] hub 2-0:1.0: USB hub found [ 2.105645] hub 2-0:1.0: 1 port detected [ 2.112370] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.118996] [drm] No driver support for vblank timestamp query. [ 2.188176] Console: switching to colour frame buffer device 170x48 [ 2.211058] host1x drm: fb0: frame buffer device [ 2.215782] host1x drm: registered panic notifier [ 2.220486] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.229484] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.234900] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 2.242942] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 2.265050] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.271856] hub 3-0:1.0: USB hub found [ 2.275674] hub 3-0:1.0: 1 port detected [ 2.280839] input: gpio-keys.4 as /devices/soc0/gpio-keys.4/input/input4 [ 2.288239] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-04-08 01:58:19 UTC (1396922299) [ 2.301445] ALSA device list: [ 2.304410] #0: NVIDIA Tegra Seaboard [ 2.309798] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 2.346268] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.354370] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 2.387157] devtmpfs: mounted [ 2.390628] Freeing unused kernel memory: 556K (c0a68000 - c0af3000) [ 2.465088] usb 2-1: new high-speed USB device number 2 using tegra-ehci ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.156 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-sf5F4C/tmpqUfG6N-uImage tftp 0x00100000 tmp/snowball-sf5F4C/tmpqUfG6N-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'tmp/snowball-sf5F4C/tmpqUfG6N-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 4679009 (476561 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4678945 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 4.571240] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 4.609354] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.617162] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 4.638541] devtmpfs: mounted [ 4.643510] Freeing unused kernel memory: 556K (c0a68000 - c0af3000) [ 4.685406] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 4.690380] Unable to handle kernel paging request at virtual address 600000f3 [ 4.690387] pgd = c0204000 [ 4.690399] [600000f3] *pgd=00000000 [ 4.690411] Internal error: Oops: 5 [#2] SMP ARM [ 4.690418] Modules linked in: [ 4.690434] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-11030-ga7963eb #1 [ 4.690445] task: c0aff118 ti: c0af4000 task.ti: c0af4000 [ 4.690465] PC is at __switch_to+0x8/0x5c [ 4.690499] LR is at __schedule+0x1c0/0x504 [ 4.690515] pc : [<c021266c>] lr : [<c07cb0ec>] psr: 60000193 [ 4.690515] sp : c0af5f50 ip : c0af4044 fp : c0af5f94 [ 4.690524] r10: c0b3f568 r9 : c0aff118 r8 : ea069e00 [ 4.690533] r7 : c07d4dc4 r6 : 00000000 r5 : c0af4010 r4 : eafb4900 [ 4.690542] r3 : 00000002 r2 : 60000093 r1 : c0af4000 r0 : c0aff118 [ 4.690554] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 4.690564] Control: 10c5387d Table: 0020404a DAC: 00000015 [ 4.690573] Process swapper/0 (pid: 0, stack limit = 0xc0af4250) [ 4.690582] Stack: (0xc0af5f50 to 0xc0af6000) [ 4.690598] 5f40: 00000000 000124f8 c0af2900 c0af2900 [ 4.690619] 5f60: c0af2900 c0bbb505 c0afc48c c0afc754 178bbc68 c0afc4b8 c0af4000 c0af4000 [ 4.690638] 5f80: eafb3de8 00000000 c0af1de0 00000000 c0af5f9c c07cb834 c0af4000 c0278b64 [ 4.690657] 5fa0: eb7ffcc0 c0bbb50b c07d4810 c0af4000 00000000 c0acffb8 00000000 c0a68af0 [ 4.690675] 5fc0: ffffffff ffffffff c0a68578 00000000 00000000 c0acffb8 00000000 10c5387d [ 4.690695] 5fe0: c0afc440 c0acffb4 c0b000e0 0020406a 411fc090 00208074 00000000 00000000 [ 4.690720] Code: e3a08000 eaffeff3 e281c01c e8ac6ff0 (e5924060) [ 4.690733] ---[ end trace 97483a84bbed7cf4 ]--- [ 4.690743] Kernel panic - not syncing: Attempted to kill the idle task! [ 4.853880] Alignment trap: not handling instruction e1923f9f at [<c07ce0cc>] [ 4.861016] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 5.972802] SMP: failed to stop secondary CPUs [ 5.977251] drm_kms_helper: panic occurred, switching back to text console [ 5.984169] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ~$off # PYBOOT: Exception: panic ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 mainline/v3.14-11030-ga7963eb/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.108 Filename 'mainline/v3.14-11030-ga7963eb/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 6.2 MiB/s done Bytes transferred = 4637696 (46c400 hex) => setenv serverip 172.16.1.3 setenv serverip 17node: wandboard status: on 2.16.1.3 => tftp 0x11000000 mainline/v3.14-11030-ga7963eb/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.14-11030-ga7963eb/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.108 Filename 'mainline/v3.14-11030-ga7963eb/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.1 MiB/s done Bytes transferred = 29143 (71d7 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46c400 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a1d6 Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 7 months

mainline build: 12 warnings 0 failures (mainline/v3.14-11030-ga7963eb)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: a7963eb Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-11030-ga7963eb/ Runtime: 43m 29s Passed: 124 Failed: 0 Warnings: 12 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 net/netfilter/xt_connlimit.c:380:45: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

11 years, 7 months

mainline boot: 43 pass, 1 fail (v3.14-10829-gdc5ed40)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-10829-gdc5ed40 Failed boot tests (console logs at the end) =========================================== bcm28155-ap: FAIL: bcm_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 55.7 sec: PASS am335x-boneblack 0 min 25.6 sec: PASS omap3-beagle-xm 1 min 5.2 sec: PASS legacy,3530beagle 0 min 36.0 sec: PASS (Warnings: 1) omap4-panda 1 min 14.3 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.3 sec: PASS omap3-overo-storm-tobi 0 min 21.8 sec: PASS omap5-uevm 1 min 6.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 13.8 sec: PASS legacy,3730storm 0 min 19.9 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 41.9 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.3 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.6 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.6 sec: PASS sun4i-a10-cubieboard 0 min 12.8 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 19.9 sec: FAIL mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.8 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.1 sec: PASS tegra30-beaver 0 min 33.6 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 53.5 sec: PASS sun7i-a20-cubieboard2 0 min 12.5 sec: PASS armada-370-mirabox 0 min 22.6 sec: PASS omap4-panda 0 min 53.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 19.3 sec: PASS bcm28155-ap 0 min 24.8 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.6 sec: PASS omap3-overo-storm-tobi 0 min 21.3 sec: PASS omap5-uevm 1 min 39.6 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.8 sec: PASS omap4-panda-es 0 min 57.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.0 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.2 sec: PASS Console logs for failures ========================= bcm_defconfig ------------- bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 0.620000] tegra-ehci: Tegra EHCI driver [ 0.630000] usbcore: registered new interface driver usb-storage [ 0.630000] mousedev: PS/2 mouse device common for all mice [ 0.640000] i2c /dev entries driver [ 0.640000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.660000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.660000] usbcore: registered new interface driver uvcvideo [ 0.670000] USB Video Class driver (1.1.1) [ 0.670000] gspca_main: v2.14.0 registered [ 0.670000] sdhci: Secure Digital Host Controller Interface driver [ 0.680000] sdhci: Copyright(c) Pierre Ossman [ 0.680000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710000] mmc0: no vqmmc regulator found [ 0.710000] mmc0: no vmmc regulator found [ 0.770000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.770000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.800000] mmc1: no vqmmc regulator found [ 0.800000] mmc1: no vmmc regulator found [ 0.850000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.850000] usbcore: registered new interface driver usbhid [ 0.860000] usbhid: USB HID core driver [ 0.860000] TCP: cubic registered [ 0.860000] NET: Registered protocol family 17 [ 0.870000] Key type dns_resolver registered [ 0.870000] ThumbEE CPU extension supported. [ 0.870000] Registering SWP/SWPB emulation handler [ 0.880000] PJ4 iWMMXt coprocessor enabled. [ 0.880000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.890000] ALSA device list: [ 0.890000] No soundcards found. [ 0.890000] Waiting for root device /dev/mmcblk0p8... [ 0.910000] mmc0: BKOPS_EN bit is not set [ 0.920000] mmc0: new high speed MMC card at address 0001 [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): INFO: recovery required on readonly filesystem [ 1.010000] EXT4-fs (mmcblk0p8): write access will be enabled during recovery [ 1.020000] EXT4-fs (mmcblk0p8): recovery complete [ 1.030000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.040000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.040000] devtmpfs: mounted [ 1.050000] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 1.080000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.080000] Alignment trap: not handling instruction e1923f9f at [<c07cd9cc>] [ 1.080000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.080000] Internal error: : 1 [#2] SMP ARM [ 1.080000] Modules linked in: [ 1.080000] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 1.080000] Not tainted 3.14.0-10829-gdc5ed40 #1 [ 1.080000] task: c09a4cdc ti: ea838000 task.ti: 70737573 [ 1.080000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.080000] LR is at __down_read_trylock+0x14/0x54 [ 1.080000] pc : [<c07cd9d0>] lr : [<c027cf5c>] psr: 40000193 [ 1.080000] sp : ea839f38 ip : ea83a020 fp : ea83a020 [ 1.080000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.080000] r7 : c09a4cdc r6 : 00000005 r5 : 20736eae r4 : 20736eaa [ 1.080000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.080000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.080000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.080000] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 1.080000] Stack: (0xea839f38 to 0x70739573) [ 1.080000] [<c07cd9d0>] (_raw_spin_lock_irqsave) from [<c027cf5c>] (__down_read_trylock+0x14/0x54) [ 1.080000] [<c027cf5c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.080000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.080000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.080000] ---[ end trace 52dadf8ef2b0e768 ]--- [ 1.080000] Alignment trap: not handling instruction e1923f9f at [<c07cd9cc>] [ 1.080000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: userspace: failed to find root shell: Unhandled fault # PYBOOT: Time: 19.87 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

mainline boot: 15 passed 18 failed (mainline/v3.14-10829-gdc5ed40)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:07.64 beaver multi_v7_defconfig : FAILED 0:29.17 capri multi_v7_defconfig : FAILED 2:57.52 cubie multi_v7_defconfig : FAILED 2:56.69 cubie2 sunxi_defconfig : FAILED 1:21.38 cubie2 multi_v7_defconfig : FAILED 3:03.45 cubie2 multi_lpae_defconfig : FAILED 2:54.26 dalmore multi_v7_defconfig : FAILED 0:36.00 dalmore multi_lpae_defconfig : FAILED 3:01.99 hummingboard multi_v7_defconfig : FAILED 1:05.55 omap5uevm multi_v7_defconfig : FAILED 3:52.41 omap5uevm multi_lpae_defconfig : FAILED 3:50.03 panda multi_v7_defconfig : FAILED 3:08.42 seaboard multi_v7_defconfig : FAILED 3:01.50 snow exynos_defconfig : FAILED 1:23.63 snowball multi_v7_defconfig : FAILED 1:11.31 trimslice multi_v7_defconfig : FAILED 3:07.20 wandboard multi_v7_defconfig : FAILED 1:07.59 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:20.10 arndale exynos_defconfig : passed 1:07.18 bbb omap2plus_defconfig : passed 1:37.36 beaver tegra_defconfig : passed 0:56.57 capri bcm_defconfig : passed 0:45.70 cubie sunxi_defconfig : passed 0:58.02 dalmore tegra_defconfig : passed 1:18.61 hummingboard imx_v6_v7_defconfig : passed 1:19.56 omap5uevm omap2plus_defconfig : warnings 1:02.56 panda omap2plus_defconfig : passed 1:14.12 sama5 sama5_defconfig : passed 1:51.36 seaboard tegra_defconfig : passed 1:05.33 snowball u8500_defconfig : passed 1:35.76 trimslice tegra_defconfig : passed 1:01.08 wandboard imx_v6_v7_defconfig : passed 1:01.36 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.235464] gspca_main: v2.14.0 registered [ 1.241785] sdhci: Secure Digital Host Controller Interface driver [ 1.248318] sdhci: Copyright(c) Pierre Ossman [ 1.254066] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.297137] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.337177] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.344026] usbcore: registered new interface driver usbhid [ 1.349928] usbhid: USB HID core driver [ 1.358978] TCP: cubic registered [ 1.362480] NET: Registered protocol family 17 [ 1.367556] Key type dns_resolver registered [ 1.372986] ThumbEE CPU extension supported. [ 1.377576] Registering SWP/SWPB emulation handler [ 1.382605] PJ4 iWMMXt coprocessor enabled. [ 1.394970] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.449833] mmc1: BKOPS_EN bit is not set [ 1.456494] mmc1: new high speed MMC card at address 0001 [ 1.462937] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.467956] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.474357] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.481363] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.488027] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.495425] libphy: 4a101000.mdio: probed [ 1.499753] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.509488] Detected MACID = bc:6a:29:7a:42:a8 [ 1.515728] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.529812] ALSA device list: [ 1.532952] No soundcards found. [ 1.537867] mmcblk0: p1 p2 [ 1.543701] mmcblk0boot1: unknown partition table [ 1.550771] mmcblk0boot0: unknown partition table [ 1.557949] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.567643] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.627161] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.635740] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.663352] devtmpfs: mounted [ 1.667530] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 1.747800] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 5.741913] 3f80: ea7aede8 c0af0de0 00000001 e98a2000 00000015 e98a3fa8 c0678a7c c0678a88 [ 5.750068] 3fa0: 60000113 ffffffff [ 5.753562] [<c02122c0>] (__irq_svc) from [<c0678a88>] (cpuidle_enter_state+0x68/0x100) [ 5.761563] [<c0678a88>] (cpuidle_enter_state) from [<c0278bd8>] (cpu_startup_entry+0x1c0/0x230) [ 5.770331] [<c0278bd8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.777275] CPU1: stopping [ 5.779975] CPU: 1 PID: -1062214952 Comm: P éa: Tainted: G D 3.14.0-10829-gdc5ed40 #1 [ 5.788832] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.796559] [<c0211768>] (show_stack) from [<c07c8b9c>] (dump_stack+0x88/0x98) [ 5.803766] [<c07c8b9c>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.811144] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.818695] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.826157] Exception stack(0xe98a1f60 to 0xe98a1fa8) [ 5.831196] 1f60: 00000000 c0b345a8 c0b345f4 0000004c ec0f3a88 00000000 524e4ed8 00000001 [ 5.839353] 1f80: ea7a6de8 c0af0de0 00000001 e98a0000 00000015 e98a1fa8 c0678a7c c0678a88 [ 5.847508] 1fa0: 60000113 ffffffff [ 5.850989] [<c02122c0>] (__irq_svc) from [<c0678a88>] (cpuidle_enter_state+0x68/0x100) [ 5.858977] [<c0678a88>] (cpuidle_enter_state) from [<c0278bd8>] (cpu_startup_entry+0x1c0/0x230) [ 5.867742] [<c0278bd8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.874684] CPU3: stopping [ 5.877385] CPU: 3 PID: -1071554224 Comm: h éh éJ@×©Øâ¯ÀTa!À Tainted: G D 3.14.0-10829-gdc5ed40 #1 [ 5.887454] Workqueue: 0xe8ddffff [ 5.890856] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.898583] [<c0211768>] (show_stack) from [<c07c8b9c>] (dump_stack+0x88/0x98) [ 5.905789] [<c07c8b9c>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.913166] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.920718] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.928180] Exception stack(0xe98a5f60 to 0xe98a5fa8) [ 5.933218] 5f60: 00000000 c0b345a8 c0b345f4 0000004c e8560ae8 00000000 524e56a8 00000001 [ 5.941376] 5f80: ea7b6de8 c0af0de0 00000001 e98a4000 00000015 e98a5fa8 c0678a7c c0678a88 [ 5.949530] 5fa0: 60000113 ffffffff [ 5.953012] [<c02122c0>] (__irq_svc) from [<c0678a88>] (cpuidle_enter_state+0x68/0x100) [ 5.960999] [<c0678a88>] (cpuidle_enter_state) from [<c0278bd8>] (cpu_startup_entry+0x1c0/0x230) [ 5.969764] [<c0278bd8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.976707] drm_kms_helper: panic occurred, switching back to text console [ 5.983607] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 5.991676] pgd = c0204000 [ 5.994371] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07cd9cc>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 1.050000] Not tainted 3.14.0-10829-gdc5ed40 #1 [ 1.050000] task: c09a4cdc ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07cd9d0>] lr : [<c027cf5c>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0afe380 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09a4cdc r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07cd9d0>] (_raw_spin_lock_irqsave) from [<c027cf5c>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cf5c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace 19a130405d8b2c04 ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07cd9cc>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.976201] mousedev: PS/2 mouse device common for all mice [ 0.983073] i2c /dev entries driver [ 0.988217] usbcore: registered new interface driver uvcvideo [ 0.994034] USB Video Class driver (1.1.1) [ 0.998125] gspca_main: v2.14.0 registered [ 1.005044] sdhci: Secure Digital Host Controller Interface driver [ 1.011218] sdhci: Copyright(c) Pierre Ossman [ 1.015938] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.022053] usbcore: registered new interface driver usbhid [ 1.027641] usbhid: USB HID core driver [ 1.034057] TCP: cubic registered [ 1.037381] NET: Registered protocol family 17 [ 1.041989] Key type dns_resolver registered [ 1.046417] ThumbEE CPU extension supported. [ 1.050701] Registering SWP/SWPB emulation handler [ 1.055504] PJ4 iWMMXt coprocessor enabled. [ 1.060772] ahci-5v: 5000 mV [ 1.064243] usb1-vbus: 5000 mV [ 1.067754] usb2-vbus: 5000 mV [ 1.071430] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.079261] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.086917] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.100291] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.108176] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 3.432976] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.452962] Sending DHCP requests ., OK [ 3.473401] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.171 [ 3.481165] IP-Config: Complete: [ 3.484425] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.171, mask=255.255.255.0, gw=172.16.1.1 [ 3.494430] host=172.16.1.171, domain=lixom.net, nis-domain=(none) [ 3.501036] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.507556] nameserver0=172.16.1.1 [ 3.511679] ALSA device list: [ 3.514659] No soundcards found. [ 3.522886] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.529289] devtmpfs: mounted [ 3.532822] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 3.556845] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 3.179917] stmmaceth 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 4.029676] ., OK [ 4.050145] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.107 [ 4.057953] IP-Config: Complete: [ 4.061227] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.107, mask=255.255.255.0, gw=172.16.1.1 [ 4.071229] host=172.16.1.107, domain=lixom.net, nis-domain=(none) [ 4.077837] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 4.084364] nameserver0=172.16.1.1 [ 4.088499] ALSA device list: [ 4.091476] No soundcards found. [ 4.100678] VFS: Mounted root (nfs filesystem) on device 0:11. [ 4.106961] devtmpfs: mounted [ 4.110580] Freeing unused kernel memory: 560K (c0a6e000 - c0afa000) [ 4.134028] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 4.140830] Alignment trap: not handling instruction e1923f9f at [<c07d479c>] [ 4.147958] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 4.154476] Internal error: : 221 [#2] SMP ARM [ 4.158914] Modules linked in: [ 4.161985] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 4.161985] Not tainted 3.14.0-10829-gdc5ed40 #1 [ 4.172328] task: c09abcd8 ti: ea03e000 task.ti: 70737573 [ 4.177730] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 4.182778] LR is at __down_read_trylock+0x14/0x54 [ 4.187564] pc : [<c07d47a0>] lr : [<c027dcb0>] psr: 40000193 [ 4.187564] sp : ea03ffb8 ip : c0b063d8 fp : ea0400a0 [ 4.199024] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 4.204242] r7 : c09abcd8 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 4.210759] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 4.217277] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 4.224490] Control: 30c5387d Table: 6a3ed500 DAC: fffffffd [ 4.230228] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 4.237613] Stack: (0xea03ffb8 to 0x70739573) [ 4.241983] [<c07d47a0>] (_raw_spin_lock_irqsave) from [<c027dcb0>] (__down_read_trylock+0x14/0x54) [ 4.251027] [<c027dcb0>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 4.259372] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.265460] ---[ end trace b72f1c9063c8a001 ]--- [ 4.270074] Alignment trap: not handling instruction e1923f9f at [<c07d479c>] [ 4.277198] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.429664] ., OK [ 3.650129] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.107 [ 3.657964] IP-Config: Complete: [ 3.661241] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.107, mask=255.255.255.0, gw=172.16.1.1 [ 3.671240] host=172.16.1.107, domain=lixom.net, nis-domain=(none) [ 3.677845] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.684373] nameserver0=172.16.1.1 [ 3.688510] ALSA device list: [ 3.691491] No soundcards found. [ 3.700733] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.707064] devtmpfs: mounted [ 3.710687] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 3.734498] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.741311] Alignment trap: not handling instruction e1923f9f at [<c07cd9cc>] [ 3.748440] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 3.754958] Internal error: : 1 [#2] SMP ARM [ 3.759222] Modules linked in: [ 3.762292] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 3.762292] Not tainted 3.14.0-10829-gdc5ed40 #1 [ 3.772638] task: c09a4cdc ti: ea03c000 task.ti: 70737573 [ 3.778041] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.783090] LR is at __down_read_trylock+0x14/0x54 [ 3.787877] pc : [<c07cd9d0>] lr : [<c027cf5c>] psr: 40000193 [ 3.787877] sp : ea03df18 ip : c0afe380 fp : ea03e000 [ 3.799337] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.804554] r7 : c09a4cdc r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 3.811073] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.817591] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.824803] Control: 10c5387d Table: 6a47006a DAC: 00000015 [ 3.830540] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 3.837925] Stack: (0xea03df18 to 0x70739573) [ 3.842294] [<c07cd9d0>] (_raw_spin_lock_irqsave) from [<c027cf5c>] (__down_read_trylock+0x14/0x54) [ 3.851340] [<c027cf5c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 3.859686] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 3.867336] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.873424] ---[ end trace 2b74b31daccdb568 ]--- [ 3.878038] Alignment trap: not handling instruction e1923f9f at [<c07cd9cc>] [ 3.885162] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017899] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017922] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017935] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017956] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017968] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018927] Switched to clocksource arch_sys_counter [ 0.026068] NET: Registered protocol family 2 [ 0.026539] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026626] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026749] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026829] TCP: reno registered [ 0.026846] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026902] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027099] NET: Registered protocol family 1 [ 0.027495] RPC: Registered named UNIX socket transport module. [ 0.027512] RPC: Registered udp transport module. [ 0.027518] RPC: Registered tcp transport module. [ 0.027524] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028496] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.029053] bounce pool size: 64 pages [ 0.036944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036963] io scheduler noop registered [ 0.036969] io scheduler deadline registered [ 0.037154] io scheduler cfq registered (default) [ 0.038800] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080776] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083241] console [ttyS0] disabled [ 0.103443] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618520] console [ttyS0] enabled [ 0.623243] mousedev: PS/2 mouse device common for all mice [ 0.629118] i2c /dev entries driver [ 0.633901] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642904] TCP: cubic registered [ 0.646223] NET: Registered protocol family 17 [ 0.650786] Registering SWP/SWPB emulation handler [ 0.656512] ahci-5v: 5000 mV [ 0.659793] usb1-vbus: 5000 mV [ 0.663151] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 3.141987] hub 1-0:1.0: USB hub found [ 3.146018] hub 1-0:1.0: 1 port detected [ 3.155221] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.167145] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.211219] ALSA device list: [ 3.214309] #0: NVIDIA Tegra Dalmore [ 3.222717] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.232545] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.277048] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.285382] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.302113] devtmpfs: mounted [ 3.306886] Freeing unused kernel memory: 560K (c0a6e000 - c0afa000) [ 3.363779] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.371412] Alignment trap: not handling instruction e1923f9f at [<c07d479c>] [ 3.378569] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 3.385118] Internal error: : 221 [#2] SMP ARM [ 3.389575] Modules linked in: [ 3.392688] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 3.392688] Not tainted 3.14.0-10829-gdc5ed40 #1 [ 3.403092] task: c09abcd8 ti: e9850000 task.ti: 70737573 [ 3.408531] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.413612] LR is at __down_read_trylock+0x14/0x54 [ 3.418426] pc : [<c07d47a0>] lr : [<c027dcb0>] psr: 40000193 [ 3.418426] sp : e9851fa8 ip : c0b063d8 fp : e9852090 [ 3.429917] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.435159] r7 : c09abcd8 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 3.441701] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.448248] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.455486] Control: 30c5387d Table: a9e2c040 DAC: fffffffd [ 3.461251] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 3.468659] Stack: (0xe9851fa8 to 0x70739573) [ 3.473069] [<c07d47a0>] (_raw_spin_lock_irqsave) from [<c027dcb0>] (__down_read_trylock+0x14/0x54) [ 3.482165] [<c027dcb0>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 3.490557] [<c0218010>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) [ 3.498243] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.504365] ---[ end trace efdb4176c8d9e790 ]--- [ 3.509011] Alignment trap: not handling instruction e1923f9f at [<c07d479c>] [ 3.516163] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 5.012786] 1f80: ea79cde8 c0af0de0 00000001 e98a0000 00000018 e98a1fa8 c0678a7c c0678a88 [ 5.020975] 1fa0: 60000113 ffffffff [ 5.024531] [<c02122c0>] (__irq_svc) from [<c0678a88>] (cpuidle_enter_state+0x68/0x100) [ 5.032592] [<c0678a88>] (cpuidle_enter_state) from [<c0278bd8>] (cpu_startup_entry+0x1c0/0x230) [ 5.041417] [<c0278bd8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.048402] CPU2: stopping [ 5.051160] CPU: 2 PID: -1071570132 Comm: T)Ÿð«é,#!ÀPa!À Tainted: G D 3.14.0-10829-gdc5ed40 #1 [ 5.061056] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.068859] [<c0211768>] (show_stack) from [<c07c8b9c>] (dump_stack+0x88/0x98) [ 5.076127] [<c07c8b9c>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.083555] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.091164] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.098660] Exception stack(0xe98a3f60 to 0xe98a3fa8) [ 5.103746] 3f60: 00000000 c0b348bc c0b34908 0000004c c3464039 00000000 2655da2a 00000001 [ 5.111950] 3f80: ea7a4de8 c0af0de0 00000001 e98a2000 00000018 e98a3fa8 c0678a7c c0678a88 [ 5.120140] 3fa0: 60000113 ffffffff [ 5.123700] [<c02122c0>] (__irq_svc) from [<c0678a88>] (cpuidle_enter_state+0x68/0x100) [ 5.131769] [<c0678a88>] (cpuidle_enter_state) from [<c0278bd8>] (cpu_startup_entry+0x1c0/0x230) [ 5.140591] [<c0278bd8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.147574] CPU3: stopping [ 5.150331] CPU: 3 PID: -1071554224 Comm: h éh éj@á©Øâ¯ÀTa!À Tainted: G D 3.14.0-10829-gdc5ed40 #1 [ 5.160454] Workqueue: 0xe8ddffff [ 5.163952] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.171749] [<c0211768>] (show_stack) from [<c07c8b9c>] (dump_stack+0x88/0x98) [ 5.179016] [<c07c8b9c>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.186443] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.194053] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.201550] Exception stack(0xe98a5f60 to 0xe98a5fa8) [ 5.206634] 5f60: 00000000 c0b348bc c0b34908 0000004c bc09deea 00000000 26560522 00000001 [ 5.214836] 5f80: ea7acde8 c0af0de0 00000001 e98a4000 00000018 e98a5fa8 c0678a7c c0678a88 [ 5.223027] 5fa0: 60000113 ffffffff [ 5.226580] [<c02122c0>] (__irq_svc) from [<c0678a88>] (cpuidle_enter_state+0x68/0x100) [ 5.234642] [<c0678a88>] (cpuidle_enter_state) from [<c0278bd8>] (cpu_startup_entry+0x1c0/0x230) [ 5.243464] [<c0278bd8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.250445] drm_kms_helper: panic occurred, switching back to text console [ 5.257502] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 5.265605] pgd = c0204000 [ 5.268330] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot > tftp 0x10800000 mainline/v3.14-10829-gdc5ed40/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.14-10829-gdc5ed40/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'mainline/v3.14-10829-gdc5ed40/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2 MiB/s done Bytes transferred = 4636440 (46bf18 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 mainline/v3.14-10829-gdc5ed40/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 mainline/v3.14-10829-gdc5ed40/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'mainline/v3.14-10829-gdc5ed40/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 1.8 MiB/s done Bytes transferred = 25705 (6469 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46bf18 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009468 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 46.731414] smps9: 2100 mV [ 46.735216] smps10_out2: 5000 mV [ 46.739441] smps10_out1: 5000 mV [ 46.743301] ldo1: 1500 <--> 1800 mV [ 46.747878] ldo2: 2800 mV [ 46.752217] ldo3: 1500 mV [ 46.755657] ldo4: 1500 <--> 1800 mV [ 46.760903] ldo5: 1800 mV [ 46.766732] ldo6: 1200 mV [ 46.770421] ldo7: 2000 mV [ 46.774758] ldo8: 3000 mV [ 46.778948] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.785099] ldoln: 1800 mV [ 46.789521] ldousb: 3250 mV [ 46.793022] REGEN1: no parameters [ 46.796573] REGEN2: no parameters [ 46.800264] regen3: no parameters [ 46.804060] SYSEN1: no parameters [ 46.807607] SYSEN2: no parameters [ 47.050708] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.057817] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.064066] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.071988] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.110776] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.124281] ALSA device list: [ 47.127378] No soundcards found. [ 47.131516] Waiting for root device /dev/mmcblk1p2... [ 47.167275] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.177484] mmc2: new high speed SDHC card at address 0001 [ 47.183450] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.188923] mmcblk1: p1 p2 [ 47.240937] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.249793] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.272341] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.280813] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.295394] devtmpfs: mounted [ 47.298762] Freeing unused kernel memory: 560K (c0a6e000 - c0afa000) [ 47.331977] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.620977] smps9: 2100 mV [ 47.624787] smps10_out2: 5000 mV [ 47.629011] smps10_out1: 5000 mV [ 47.632882] ldo1: 1500 <--> 1800 mV [ 47.637485] ldo2: 2800 mV [ 47.641839] ldo3: 1500 mV [ 47.645304] ldo4: 1500 <--> 1800 mV [ 47.650544] ldo5: 1800 mV [ 47.656397] ldo6: 1200 mV [ 47.660075] ldo7: 2000 mV [ 47.664426] ldo8: 3000 mV [ 47.668609] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.674772] ldoln: 1800 mV [ 47.679186] ldousb: 3250 mV [ 47.682685] REGEN1: no parameters [ 47.686229] REGEN2: no parameters [ 47.689923] regen3: no parameters [ 47.693720] SYSEN1: no parameters [ 47.697271] SYSEN2: no parameters [ 47.940372] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.947476] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.953710] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.961650] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 48.000446] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.013957] ALSA device list: [ 48.017059] No soundcards found. [ 48.021093] Waiting for root device /dev/mmcblk1p2... [ 48.056956] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.067169] mmc2: new high speed SDHC card at address 0001 [ 48.073133] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.078605] mmcblk1: p1 p2 [ 48.130600] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.139443] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.162017] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.170494] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.185063] devtmpfs: mounted [ 48.188426] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 48.221612] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.761932] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.768005] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.773529] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.778961] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.783966] VDAC: 1800 mV [ 1.783966] VANA: 2100 mV [ 1.791229] VCXIO: 1800 mV [ 1.791259] VUSB: 3300 mV [ 1.798156] V1V8: 1800 mV [ 1.801727] V2V1: 2100 mV [ 1.888305] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.019653] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.027130] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.036071] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.043518] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.050140] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.057342] hub 1-1:1.0: USB hub found [ 2.061584] hub 1-1:1.0: 5 ports detected [ 2.066864] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.129180] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.185455] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.195953] mmc0: new high speed SDHC card at address b368 [ 2.202056] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.208190] mmcblk0: p1 p2 [ 2.340362] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.343597] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.353881] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.355255] mmc1: new SDIO card at address 0001 [ 2.373382] ALSA device list: [ 2.376525] No soundcards found. [ 2.379119] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.388885] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.398406] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.423065] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.431579] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.449249] devtmpfs: mounted [ 2.449279] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 2.503021] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.534390] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534393] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534397] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534400] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534403] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534407] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534410] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534413] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534417] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534420] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534423] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534426] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534430] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.534433] Unable to handle kernel paging request at virtual address 00003aa1 [ 2.711733] task: c09a4cdc ti: ea03a000 task.ti: 70737573 [ 2.717128] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 2.722173] LR is at __down_read_trylock+0x14/0x54 [ 2.726953] pc : [<c07cd9d0>] lr : [<c027cf5c>] psr: 40000193 [ 2.726953] sp : ea03bee8 ip : c0afe380 fp : ea03bfd0 [ 2.738407] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 2.743619] r7 : c09a4cdc r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 2.750130] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 2.756641] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 2.763846] Control: 10c5387d Table: 2a4a404a DAC: 00000015 [ 2.769578] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 2.776955] Stack: (0xea03bee8 to 0x70739573) [ 2.781313] [<c07cd9d0>] (_raw_spin_lock_irqsave) from [<c027cf5c>] (__down_read_trylock+0x14/0x54) [ 2.790357] [<c027cf5c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 2.798698] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 2.806353] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 2.813730] Exception stack(0xea03bfd0 to 0xea03c018) [ 2.818771] bfc0: 0000017c 00000017 ea03c000 00000193 [ 2.826934] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 2.835095] c000: c0afe380 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 2.841698] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 2.847778] ---[ end trace 4458301cb63bc8dd ]--- [ 2.852386] Alignment trap: not handling instruction e1923f9f at [<c07cd9cc>] [ 2.859504] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-exynos_defconfig failure log: ------------------------------------------------- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc04d6adc (4923 kB) [ 0.000000] .init : 0xc04d7000 - 0xc0510d40 ( 232 kB) [ 0.000000] .data : 0xc0512000 - 0xc054c420 ( 234 kB) [ 0.000000] .bss : 0xc054c42c - 0xc058f554 ( 269 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000007] Switching to timer-based delay loop [ 2884.531216] Console: colour dummy device 80x30 [ 2884.531227] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2884.531234] pid_max: default: 32768 minimum: 301 [ 2884.531314] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2884.531320] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2884.531605] CPU: Testing write buffer coherency: ok [ 2884.531716] CPU0: update cpu_power 1024 [ 2884.531722] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2884.531736] Setting up static identity map for 0x40394280 - 0x403942d8 [ 2920.607921] CPU1: Booted secondary processor [ 2920.607947] CPU1: update cpu_power 1024 [ 2920.607950] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2920.608025] Brought up 2 CPUs [ 2920.608034] SMP: Total of 2 processors activated. [ 2920.608038] CPU: All CPU(s) started in HYP mode. [ 2920.608041] CPU: Virtualization extensions available. [ 2920.608307] devtmpfs: initialized [ 2920.610598] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2920.610870] pinctrl core: initialized pinctrl subsystem [ 2920.611077] regulator-dummy: no parameters [ 2920.617839] NET: Registered protocol family 16 [ 2920.617940] DMA: preallocated 256 KiB pool for atomic coherent allocatio~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.155 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-RN2lyR/tmpjkMDsO-uImage tftp 0x00100000 tmp/snowball-RN2lyR/tmpjkMDsO-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.155 Filename 'tmp/snowball-RN2lyR/tmpjkMDsO-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 4677753 (476079 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4677689 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 4.791957] [<c07cd9d0>] (_raw_spin_lock_irqsave) from [<c027cf5c>] (__down_read_trylock+0x14/0x54) [ 4.801014] [<c027cf5c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 4.809366] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 4.817033] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 4.824417] Exception stack(0xea03bfd0 to 0xea03c018) [ 4.829465] bfc0: 0000017c 00000017 ea03c000 00000193 [ 4.837637] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 4.845805] c000: c0afe380 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 4.852418] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.858506] ---[ end trace 5a4132d783b09dba ]--- [ 4.863120] Alignment trap: not handling instruction e1923f9f at [<c07cd9cc>] [ 4.870246] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 8.069597] ------------[ cut here ]------------ [ 8.074226] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/kernel/sched/core.c:1685 wake_up_process+0x40/0x44() [ 8.084469] Modules linked in: [ 8.087532] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-10829-gdc5ed40 #1 [ 8.095810] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 8.103568] [<c0211768>] (show_stack) from [<c07c8b9c>] (dump_stack+0x88/0x98) [ 8.110809] [<c07c8b9c>] (dump_stack) from [<c02454b8>] (warn_slowpath_common+0x6c/0x88) [ 8.118903] [<c02454b8>] (warn_slowpath_common) from [<c0245570>] (warn_slowpath_null+0x1c/0x24) [ 8.127684] [<c0245570>] (warn_slowpath_null) from [<c026c118>] (wake_up_process+0x40/0x44) [ 8.136044] [<c026c118>] (wake_up_process) from [<c02a2960>] (watchdog_timer_fn+0x54/0x17c) [ 8.144397] [<c02a2960>] (watchdog_timer_fn) from [<c0262dc0>] (__run_hrtimer.isra.32+0x54/0xe4) [ 8.153181] [<c0262dc0>] (__run_hrtimer.isra.32) from [<c02636a8>] (hrtimer_interrupt+0x11c/0x2d0) [ 8.162136] [<c02636a8>] (hrtimer_interrupt) from [<c0215010>] (twd_handler+0x34/0x44) [ 8.170052] [<c0215010>] (twd_handler) from [<c0286100>] (handle_percpu_devid_irq+0x6c/0x84) [ 8.178494] [<c0286100>] (handle_percpu_devid_irq) from [<c02824d0>] (generic_handle_irq+0x2c/0x3c) [ 8.187539] [<c02824d0>] (generic_handle_irq) from [<c020eebc>] (handle_IRQ+0x40/0x90) [ 8.195453] [<c020eebc>] (handle_IRQ) from [<c0208884>] (gic_handle_irq+0x2c/0x5c) [ 8.203022] [<c0208884>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 8.210492] Exception stack(0xc0af3f28 to 0xc0af3f70) [ 8.215544] 3f20: 00000000 c0b34294 c0b34294 0000004c dc5f9d48 00000001 [ 8.223715] 3f40: e069dae8 00000001 eafb3de8 c0af0de0 00000000 c0af2000 00000015 c0af3f70 [ 8.231882] 3f60: c0678a7c c0678a88 60000113 ffffffff [ 8.236958] [<c02122c0>] (__irq_svc) from [<c0678a88>] (cpuidle_enter_state+0x68/0x100) [ 8.244978] [<c0678a88>] (cpuidle_enter_state) from [<c0278bd8>] (cpu_startup_entry+0x1c0/0x230) [ 8.253774] [<c0278bd8>] (cpu_startup_entry) from [<c0a67af0>] (start_kernel+0x348/0x354) [ 8.261939] ---[ end trace 5a4132d783b09dbb ]--- ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 mainline/v3.14-10829-gdc5ed40/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.108 Filename 'mainline/v3.14-10829-gdc5ed40/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 6.1 MiB/s done Bytes transferred = 4636440 (46bf18 hex) => setenv serverip 172.16.1.3 setenv serverip 17node: wandboard status: on 2.16.1.3 => tftp 0x11000000 mainline/v3.14-10829-gdc5ed40/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.14-10829-gdc5ed40/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.108 Filename 'mainline/v3.14-10829-gdc5ed40/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 4.6 MiB/s done Bytes transferred = 29143 (71d7 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46bf18 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a1d6 Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 7 months

mainline build: 12 warnings 0 failures (mainline/v3.14-10829-gdc5ed40)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: dc5ed40 Merge branch 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-10829-gdc5ed40/ Runtime: 41m 50s Passed: 124 Failed: 0 Warnings: 12 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 net/netfilter/xt_connlimit.c:380:45: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b80): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

11 years, 7 months

mainline boot: 43 pass, 1 fail (v3.14-10773-gb8780c3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-10773-gb8780c3 Failed boot tests (console logs at the end) =========================================== bcm28155-ap: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 52.1 sec: PASS am335x-boneblack 0 min 25.6 sec: PASS omap3-beagle-xm 1 min 0.9 sec: PASS legacy,3530beagle 0 min 44.1 sec: PASS (Warnings: 1) omap4-panda 1 min 5.6 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 21.8 sec: PASS omap5-uevm 1 min 0.3 sec: PASS (Warnings: 1) omap4-panda-es 1 min 12.8 sec: PASS legacy,3730storm 0 min 22.8 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 39.6 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.3 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.5 sec: PASS sun4i-a10-cubieboard 0 min 13.1 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 22.8 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.4 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.9 sec: PASS tegra30-beaver 0 min 17.1 sec: PASS am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 47.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 1 min 0.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS sun4i-a10-cubieboard 0 min 14.4 sec: PASS bcm28155-ap 2 min 23.5 sec: FAIL omap3-overo-tobi 0 min 22.2 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.2 sec: PASS am335x-bone 0 min 26.7 sec: PASS omap3-overo-storm-tobi 0 min 23.8 sec: PASS omap5-uevm 1 min 35.7 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.1 sec: PASS omap4-panda-es 0 min 52.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.9 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.4 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 0.610000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.620000] ehci-orion: EHCI orion driver [ 0.620000] SPEAr-ehci: EHCI SPEAr driver [ 0.620000] tegra-ehci: Tegra EHCI driver [ 0.630000] usbcore: registered new interface driver usb-storage [ 0.630000] mousedev: PS/2 mouse device common for all mice [ 0.640000] i2c /dev entries driver [ 0.640000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.660000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.660000] usbcore: registered new interface driver uvcvideo [ 0.670000] USB Video Class driver (1.1.1) [ 0.670000] gspca_main: v2.14.0 registered [ 0.670000] sdhci: Secure Digital Host Controller Interface driver [ 0.680000] sdhci: Copyright(c) Pierre Ossman [ 0.680000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710000] mmc0: no vqmmc regulator found [ 0.710000] mmc0: no vmmc regulator found [ 0.770000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.770000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.800000] mmc1: no vqmmc regulator found [ 0.800000] mmc1: no vmmc regulator found [ 0.850000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.850000] usbcore: registered new interface driver usbhid [ 0.860000] usbhid: USB HID core driver [ 0.860000] TCP: cubic registered [ 0.860000] NET: Registered protocol family 17 [ 0.870000] Key type dns_resolver registered [ 0.870000] ThumbEE CPU extension supported. [ 0.870000] Registering SWP/SWPB emulation handler [ 0.880000] PJ4 iWMMXt coprocessor enabled. [ 0.880000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.890000] ALSA device list: [ 0.890000] No soundcards found. [ 0.890000] Waiting for root device /dev/mmcblk0p8... [ 0.910000] mmc0: BKOPS_EN bit is not set [ 0.920000] mmc0: new high speed MMC card at address 0001 [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07cd964>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.060000] Internal error: : 1 [#2] SMP ARM [ 1.060000] Modules linked in: [ 1.060000] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 1.060000] Not tainted 3.14.0-10773-gb8780c3 #1 [ 1.060000] task: c09a4c2c ti: ea838000 task.ti: 70737573 [ 1.060000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.060000] LR is at __down_read_trylock+0x14/0x54 [ 1.060000] pc : [<c07cd968>] lr : [<c027cf4c>] psr: 40000193 [ 1.060000] sp : ea839f38 ip : ea83a020 fp : ea83a020 [ 1.060000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.060000] r7 : c09a4c2c r6 : 00000005 r5 : 20736eae r4 : 20736eaa [ 1.060000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.060000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.060000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.060000] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 1.060000] Stack: (0xea839f38 to 0x70739573) [ 1.060000] [<c07cd968>] (_raw_spin_lock_irqsave) from [<c027cf4c>] (__down_read_trylock+0x14/0x54) [ 1.060000] [<c027cf4c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.060000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.060000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.060000] ---[ end trace 18328bc5e49fab6b ]--- [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07cd964>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 143.50 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

mainline boot: 16 passed 17 failed (mainline/v3.14-10773-gb8780c3)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:07.15 beaver multi_v7_defconfig : FAILED 0:30.12 capri multi_v7_defconfig : FAILED 2:58.32 cubie multi_v7_defconfig : FAILED 3:02.00 cubie2 sunxi_defconfig : FAILED 1:21.49 cubie2 multi_v7_defconfig : FAILED 3:03.18 cubie2 multi_lpae_defconfig : FAILED 2:54.24 dalmore multi_v7_defconfig : FAILED 0:36.68 dalmore multi_lpae_defconfig : FAILED 3:03.00 hummingboard multi_v7_defconfig : FAILED 1:05.16 omap5uevm multi_v7_defconfig : FAILED 3:51.94 omap5uevm multi_lpae_defconfig : FAILED 3:49.97 panda multi_v7_defconfig : FAILED 3:08.21 seaboard multi_v7_defconfig : FAILED 3:02.48 snowball multi_v7_defconfig : FAILED 1:11.38 trimslice multi_v7_defconfig : FAILED 3:03.78 wandboard multi_v7_defconfig : FAILED 1:07.42 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.11 arndale exynos_defconfig : passed 1:08.74 bbb omap2plus_defconfig : passed 1:37.48 beaver tegra_defconfig : passed 0:55.91 capri bcm_defconfig : passed 0:42.85 cubie sunxi_defconfig : passed 0:54.02 dalmore tegra_defconfig : passed 1:26.19 hummingboard imx_v6_v7_defconfig : passed 1:23.12 omap5uevm omap2plus_defconfig : warnings 1:01.79 panda omap2plus_defconfig : passed 1:15.67 sama5 sama5_defconfig : passed 1:51.69 seaboard tegra_defconfig : passed 0:59.24 snow exynos_defconfig : passed 1:31.89 snowball u8500_defconfig : passed 1:30.90 trimslice tegra_defconfig : passed 1:00.52 wandboard imx_v6_v7_defconfig : passed 1:00.50 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.237561] gspca_main: v2.14.0 registered [ 1.243896] sdhci: Secure Digital Host Controller Interface driver [ 1.250428] sdhci: Copyright(c) Pierre Ossman [ 1.256188] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.298022] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.338069] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.344922] usbcore: registered new interface driver usbhid [ 1.350825] usbhid: USB HID core driver [ 1.359908] TCP: cubic registered [ 1.363409] NET: Registered protocol family 17 [ 1.368485] Key type dns_resolver registered [ 1.373935] ThumbEE CPU extension supported. [ 1.378527] Registering SWP/SWPB emulation handler [ 1.383556] PJ4 iWMMXt coprocessor enabled. [ 1.395883] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.450725] mmc1: BKOPS_EN bit is not set [ 1.457383] mmc1: new high speed MMC card at address 0001 [ 1.463819] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.468844] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.475245] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.482262] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.488913] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.496327] libphy: 4a101000.mdio: probed [ 1.500655] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.510404] Detected MACID = bc:6a:29:7a:42:a8 [ 1.516659] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.530723] ALSA device list: [ 1.533859] No soundcards found. [ 1.538769] mmcblk0: p1 p2 [ 1.544607] mmcblk0boot1: unknown partition table [ 1.551692] mmcblk0boot0: unknown partition table [ 1.558855] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.568534] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.628132] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.636715] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.664250] devtmpfs: mounted [ 1.668433] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 1.743087] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 5.739779] 1f80: ea7a6de8 c0af0de0 00000001 e98a0000 00000015 e98a1fa8 c0678a50 c0678a5c [ 5.747933] 1fa0: 60000113 ffffffff [ 5.751429] [<c02122c0>] (__irq_svc) from [<c0678a5c>] (cpuidle_enter_state+0x68/0x100) [ 5.759430] [<c0678a5c>] (cpuidle_enter_state) from [<c0278bc8>] (cpu_startup_entry+0x1c0/0x230) [ 5.768198] [<c0278bc8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.775143] CPU2: stopping [ 5.777843] CPU: 2 PID: -1071570132 Comm: TéÊŸð«é,#!ÀPa!À Tainted: G D 3.14.0-10773-gb8780c3 #1 [ 5.787655] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.795383] [<c0211768>] (show_stack) from [<c07c8b38>] (dump_stack+0x88/0x98) [ 5.802588] [<c07c8b38>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.809966] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.817518] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.824980] Exception stack(0xe98a3f60 to 0xe98a3fa8) [ 5.830018] 3f60: 00000000 c0b345a8 c0b345f4 0000004c e855eba8 00000000 523c3220 00000001 [ 5.838176] 3f80: ea7aede8 c0af0de0 00000001 e98a2000 00000015 e98a3fa8 c0678a50 c0678a5c [ 5.846331] 3fa0: 60000113 ffffffff [ 5.849813] [<c02122c0>] (__irq_svc) from [<c0678a5c>] (cpuidle_enter_state+0x68/0x100) [ 5.857800] [<c0678a5c>] (cpuidle_enter_state) from [<c0278bc8>] (cpu_startup_entry+0x1c0/0x230) [ 5.866565] [<c0278bc8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.873508] CPU3: stopping [ 5.876208] CPU: 3 PID: -1071554224 Comm: h éh éJ Tainted: G D 3.14.0-10773-gb8780c3 #1 [ 5.885323] Workqueue: 0xe8ddffff [ 5.888724] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.896452] [<c0211768>] (show_stack) from [<c07c8b38>] (dump_stack+0x88/0x98) [ 5.903657] [<c07c8b38>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.911035] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.918587] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.926049] Exception stack(0xe98a5f60 to 0xe98a5fa8) [ 5.931086] 5f60: 00000000 c0b345a8 c0b345f4 0000004c eafe4b70 00000000 523c39f0 00000001 [ 5.939244] 5f80: ea7b6de8 c0af0de0 00000001 e98a4000 00000015 e98a5fa8 c0678a50 c0678a5c [ 5.947399] 5fa0: 60000113 ffffffff [ 5.950881] [<c02122c0>] (__irq_svc) from [<c0678a5c>] (cpuidle_enter_state+0x68/0x100) [ 5.958869] [<c0678a5c>] (cpuidle_enter_state) from [<c0278bc8>] (cpu_startup_entry+0x1c0/0x230) [ 5.967635] [<c0278bc8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.974579] drm_kms_helper: panic occurred, switching back to text console [ 5.981477] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 5.989546] pgd = c0204000 [ 5.992241] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07cd964>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 1.050000] Not tainted 3.14.0-10773-gb8780c3 #1 [ 1.050000] task: c09a4c2c ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07cd968>] lr : [<c027cf4c>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0afe380 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09a4c2c r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07cd968>] (_raw_spin_lock_irqsave) from [<c027cf4c>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cf4c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace eb0856dca0171ab9 ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07cd964>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.976277] mousedev: PS/2 mouse device common for all mice [ 0.983168] i2c /dev entries driver [ 0.988318] usbcore: registered new interface driver uvcvideo [ 0.994130] USB Video Class driver (1.1.1) [ 0.998221] gspca_main: v2.14.0 registered [ 1.005162] sdhci: Secure Digital Host Controller Interface driver [ 1.011336] sdhci: Copyright(c) Pierre Ossman [ 1.016053] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.022178] usbcore: registered new interface driver usbhid [ 1.027771] usbhid: USB HID core driver [ 1.034191] TCP: cubic registered [ 1.037513] NET: Registered protocol family 17 [ 1.042124] Key type dns_resolver registered [ 1.046551] ThumbEE CPU extension supported. [ 1.050837] Registering SWP/SWPB emulation handler [ 1.055639] PJ4 iWMMXt coprocessor enabled. [ 1.060912] ahci-5v: 5000 mV [ 1.064374] usb1-vbus: 5000 mV [ 1.067893] usb2-vbus: 5000 mV [ 1.071559] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.079396] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.087049] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.100419] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.108311] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 3.433026] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.453016] Sending DHCP requests ., OK [ 3.473452] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.170 [ 3.481219] IP-Config: Complete: [ 3.484477] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.170, mask=255.255.255.0, gw=172.16.1.1 [ 3.494483] host=172.16.1.170, domain=lixom.net, nis-domain=(none) [ 3.501088] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.507618] nameserver0=172.16.1.1 [ 3.511743] ALSA device list: [ 3.514724] No soundcards found. [ 3.523490] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.529806] devtmpfs: mounted [ 3.533388] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 3.557885] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 3.179917] stmmaceth 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.869682] ., OK [ 3.890144] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.106 [ 3.897959] IP-Config: Complete: [ 3.901233] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.106, mask=255.255.255.0, gw=172.16.1.1 [ 3.911231] host=172.16.1.106, domain=lixom.net, nis-domain=(none) [ 3.917837] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.924364] nameserver0=172.16.1.1 [ 3.928500] ALSA device list: [ 3.931480] No soundcards found. [ 3.940582] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.946841] devtmpfs: mounted [ 3.950459] Freeing unused kernel memory: 560K (c0a6e000 - c0afa000) [ 3.974145] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.980953] Alignment trap: not handling instruction e1923f9f at [<c07d4734>] [ 3.988079] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 3.994597] Internal error: : 221 [#2] SMP ARM [ 3.999035] Modules linked in: [ 4.002105] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 4.002105] Not tainted 3.14.0-10773-gb8780c3 #1 [ 4.012448] task: c09abc38 ti: ea03e000 task.ti: 70737573 [ 4.017851] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 4.022900] LR is at __down_read_trylock+0x14/0x54 [ 4.027687] pc : [<c07d4738>] lr : [<c027dca0>] psr: 40000193 [ 4.027687] sp : ea03ffb8 ip : c0b063d8 fp : ea0400a0 [ 4.039146] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 4.044363] r7 : c09abc38 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 4.050880] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 4.057400] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 4.064612] Control: 30c5387d Table: 6a3ed500 DAC: fffffffd [ 4.070349] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 4.077734] Stack: (0xea03ffb8 to 0x70739573) [ 4.082106] [<c07d4738>] (_raw_spin_lock_irqsave) from [<c027dca0>] (__down_read_trylock+0x14/0x54) [ 4.091149] [<c027dca0>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 4.099492] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.105581] ---[ end trace e6a635e071437ea4 ]--- [ 4.110194] Alignment trap: not handling instruction e1923f9f at [<c07d4734>] [ 4.117318] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.819740] ., OK [ 3.840202] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.106 [ 3.848037] IP-Config: Complete: [ 3.851316] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.106, mask=255.255.255.0, gw=172.16.1.1 [ 3.861316] host=172.16.1.106, domain=lixom.net, nis-domain=(none) [ 3.867922] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.874452] nameserver0=172.16.1.1 [ 3.878590] ALSA device list: [ 3.881569] No soundcards found. [ 3.890524] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.896789] devtmpfs: mounted [ 3.900401] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 3.924116] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.930933] Alignment trap: not handling instruction e1923f9f at [<c07cd964>] [ 3.938060] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 3.944578] Internal error: : 1 [#2] SMP ARM [ 3.948841] Modules linked in: [ 3.951912] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 3.951912] Not tainted 3.14.0-10773-gb8780c3 #1 [ 3.962256] task: c09a4c2c ti: ea03c000 task.ti: 70737573 [ 3.967658] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.972707] LR is at __down_read_trylock+0x14/0x54 [ 3.977492] pc : [<c07cd968>] lr : [<c027cf4c>] psr: 40000193 [ 3.977492] sp : ea03df18 ip : c0afe380 fp : ea03e000 [ 3.988952] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.994170] r7 : c09a4c2c r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 4.000688] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 4.007206] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 4.014418] Control: 10c5387d Table: 6a47006a DAC: 00000015 [ 4.020155] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 4.027540] Stack: (0xea03df18 to 0x70739573) [ 4.031909] [<c07cd968>] (_raw_spin_lock_irqsave) from [<c027cf4c>] (__down_read_trylock+0x14/0x54) [ 4.040953] [<c027cf4c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 4.049302] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 4.056952] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.063042] ---[ end trace 01084b01be8c31b6 ]--- [ 4.067656] Alignment trap: not handling instruction e1923f9f at [<c07cd964>] [ 4.074780] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017968] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017992] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.018005] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.018025] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.018038] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018993] Switched to clocksource arch_sys_counter [ 0.026118] NET: Registered protocol family 2 [ 0.026589] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026675] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026797] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026881] TCP: reno registered [ 0.026899] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026955] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027155] NET: Registered protocol family 1 [ 0.027554] RPC: Registered named UNIX socket transport module. [ 0.027567] RPC: Registered udp transport module. [ 0.027573] RPC: Registered tcp transport module. [ 0.027579] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028550] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.029104] bounce pool size: 64 pages [ 0.037017] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.037035] io scheduler noop registered [ 0.037041] io scheduler deadline registered [ 0.037230] io scheduler cfq registered (default) [ 0.038871] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080819] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083268] console [ttyS0] disabled [ 0.103467] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618552] console [ttyS0] enabled [ 0.623292] mousedev: PS/2 mouse device common for all mice [ 0.629164] i2c /dev entries driver [ 0.633938] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642935] TCP: cubic registered [ 0.646255] NET: Registered protocol family 17 [ 0.650821] Registering SWP/SWPB emulation handler [ 0.656551] ahci-5v: 5000 mV [ 0.659836] usb1-vbus: 5000 mV [ 0.663194] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 3.733356] Stack: (0xe9851fa8 to 0x70739573) [ 3.737793] [<c07d4738>] (_raw_spin_lock_irqsave) from [<c027dca0>] (__down_read_trylock+0x14/0x54) [ 3.746927] [<c027dca0>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 3.755322] [<c0218010>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) [ 3.763034] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.769168] ---[ end trace 6182a7b77d66c4f2 ]--- [ 3.773821] Alignment trap: not handling instruction e1923f9f at [<c07d4734>] [ 3.780991] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 4.012206] ------------[ cut here ]------------ [ 4.016903] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/kernel/sched/core.c:1685 wake_up_process+0x40/0x44() [ 4.027170] Modules linked in: [ 4.030286] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-10773-gb8780c3 #1 [ 4.038625] [<c0215d64>] (unwind_backtrace) from [<c0211778>] (show_stack+0x10/0x14) [ 4.046430] [<c0211778>] (show_stack) from [<c07cf908>] (dump_stack+0x88/0x98) [ 4.053709] [<c07cf908>] (dump_stack) from [<c0245f68>] (warn_slowpath_common+0x6c/0x88) [ 4.061847] [<c0245f68>] (warn_slowpath_common) from [<c0246020>] (warn_slowpath_null+0x1c/0x24) [ 4.070670] [<c0246020>] (warn_slowpath_null) from [<c026ce74>] (wake_up_process+0x40/0x44) [ 4.079069] [<c026ce74>] (wake_up_process) from [<c02a3700>] (watchdog_timer_fn+0x54/0x17c) [ 4.087462] [<c02a3700>] (watchdog_timer_fn) from [<c0263b1c>] (__run_hrtimer.isra.32+0x54/0xe4) [ 4.096282] [<c0263b1c>] (__run_hrtimer.isra.32) from [<c0264404>] (hrtimer_interrupt+0x11c/0x2d0) [ 4.105281] [<c0264404>] (hrtimer_interrupt) from [<c0295f4c>] (tick_do_broadcast.constprop.7+0xb4/0xb8) [ 4.114799] [<c0295f4c>] (tick_do_broadcast.constprop.7) from [<c02960a4>] (tick_handle_oneshot_broadcast+0x154/0x1fc) [ 4.125541] [<c02960a4>] (tick_handle_oneshot_broadcast) from [<c06a65a8>] (tegra_timer_interrupt+0x24/0x2c) [ 4.135417] [<c06a65a8>] (tegra_timer_interrupt) from [<c0283ad8>] (handle_irq_event_percpu+0x38/0x130) [ 4.144849] [<c0283ad8>] (handle_irq_event_percpu) from [<c0283c10>] (handle_irq_event+0x40/0x60) [ 4.153756] [<c0283c10>] (handle_irq_event) from [<c0286c6c>] (handle_fasteoi_irq+0xa8/0x1a4) [ 4.162316] [<c0286c6c>] (handle_fasteoi_irq) from [<c0283214>] (generic_handle_irq+0x2c/0x3c) [ 4.170969] [<c0283214>] (generic_handle_irq) from [<c020eebc>] (handle_IRQ+0x40/0x90) [ 4.178921] [<c020eebc>] (handle_IRQ) from [<c02088b4>] (gic_handle_irq+0x2c/0x5c) [ 4.186530] [<c02088b4>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 4.194026] Exception stack(0xc0afbf20 to 0xc0afbf68) [ 4.199112] bf20: 00000000 c0b3cb9c c0b3cbe8 0000004c ee3e81fb 00000000 ee6c30a4 00000000 [ 4.207315] bf40: ea794de8 c0af8de0 00000001 c0afa000 00000018 c0afbf68 c067ecb4 c067ecc0 [ 4.215504] bf60: 60000113 ffffffff [ 4.219061] [<c02122c0>] (__irq_svc) from [<c067ecc0>] (cpuidle_enter_state+0x68/0x100) [ 4.227119] [<c067ecc0>] (cpuidle_enter_state) from [<c027991c>] (cpu_startup_entry+0x1c0/0x230) [ 4.235958] [<c027991c>] (cpu_startup_entry) from [<c0a6eb10>] (start_kernel+0x368/0x374) [ 4.244149] ---[ end trace 6182a7b77d66c4f3 ]--- ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 5.032465] 1f80: ea79cde8 c0af0de0 00000001 e98a0000 00000018 e98a1fa8 c0678a50 c0678a5c [ 5.040653] 1fa0: 60000113 ffffffff [ 5.044207] [<c02122c0>] (__irq_svc) from [<c0678a5c>] (cpuidle_enter_state+0x68/0x100) [ 5.052270] [<c0678a5c>] (cpuidle_enter_state) from [<c0278bc8>] (cpu_startup_entry+0x1c0/0x230) [ 5.061092] [<c0278bc8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.068074] CPU2: stopping [ 5.070832] CPU: 2 PID: -1071570132 Comm: TiÕŸð«é,#!ÀPa!À Tainted: G D 3.14.0-10773-gb8780c3 #1 [ 5.080728] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.088532] [<c0211768>] (show_stack) from [<c07c8b38>] (dump_stack+0x88/0x98) [ 5.095800] [<c07c8b38>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.103230] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.110840] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.118337] Exception stack(0xe98a3f60 to 0xe98a3fa8) [ 5.123423] 3f60: 00000000 c0b348bc c0b34908 0000004c c2efd09f 00000000 27811c84 00000001 [ 5.131626] 3f80: ea7a4de8 c0af0de0 00000001 e98a2000 00000018 e98a3fa8 c0678a50 c0678a5c [ 5.139816] 3fa0: 60000113 ffffffff [ 5.143376] [<c02122c0>] (__irq_svc) from [<c0678a5c>] (cpuidle_enter_state+0x68/0x100) [ 5.151445] [<c0678a5c>] (cpuidle_enter_state) from [<c0278bc8>] (cpu_startup_entry+0x1c0/0x230) [ 5.160267] [<c0278bc8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.167249] CPU3: stopping [ 5.170006] CPU: 3 PID: -1071554224 Comm: h éh éjÀà©Øâ¯ÀTa!À Tainted: G D 3.14.0-10773-gb8780c3 #1 [ 5.180129] Workqueue: 0xe8ddffff [ 5.183626] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.191424] [<c0211768>] (show_stack) from [<c07c8b38>] (dump_stack+0x88/0x98) [ 5.198691] [<c07c8b38>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.206120] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.213731] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.221227] Exception stack(0xe98a5f60 to 0xe98a5fa8) [ 5.226311] 5f60: 00000000 c0b348bc c0b34908 0000004c bca1ed05 00000000 2781477c 00000001 [ 5.234513] 5f80: ea7acde8 c0af0de0 00000001 e98a4000 00000018 e98a5fa8 c0678a50 c0678a5c [ 5.242705] 5fa0: 60000113 ffffffff [ 5.246258] [<c02122c0>] (__irq_svc) from [<c0678a5c>] (cpuidle_enter_state+0x68/0x100) [ 5.254318] [<c0678a5c>] (cpuidle_enter_state) from [<c0278bc8>] (cpu_startup_entry+0x1c0/0x230) [ 5.263139] [<c0278bc8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.270121] drm_kms_helper: panic occurred, switching back to text console [ 5.277174] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 5.285276] pgd = c0204000 [ 5.288003] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot > tftp 0x10800000 mainline/v3.14-10773-gb8780c3/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.14-10773-gb8780c3/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'mainline/v3.14-10773-gb8780c3/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2 MiB/s done Bytes transferred = 4636784 (46c070 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 mainline/v3.14-10773-gb8780c3/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 mainline/v3.14-10773-gb8780c3/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'mainline/v3.14-10773-gb8780c3/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 865.2 KiB/s done Bytes transferred = 25705 (6469 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46c070 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009468 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 46.730857] smps9: 2100 mV [ 46.734667] smps10_out2: 5000 mV [ 46.738877] smps10_out1: 5000 mV [ 46.742743] ldo1: 1500 <--> 1800 mV [ 46.747326] ldo2: 2800 mV [ 46.751658] ldo3: 1500 mV [ 46.755098] ldo4: 1500 <--> 1800 mV [ 46.760336] ldo5: 1800 mV [ 46.766167] ldo6: 1200 mV [ 46.769854] ldo7: 2000 mV [ 46.774193] ldo8: 3000 mV [ 46.778391] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.784545] ldoln: 1800 mV [ 46.788967] ldousb: 3250 mV [ 46.792460] REGEN1: no parameters [ 46.796012] REGEN2: no parameters [ 46.799706] regen3: no parameters [ 46.803507] SYSEN1: no parameters [ 46.807058] SYSEN2: no parameters [ 47.050387] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.057492] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.063748] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.071675] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.110461] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.123969] ALSA device list: [ 47.127074] No soundcards found. [ 47.131119] Waiting for root device /dev/mmcblk1p2... [ 47.166949] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.177160] mmc2: new high speed SDHC card at address 0001 [ 47.183131] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.188592] mmcblk1: p1 p2 [ 47.240610] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.249454] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.271814] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.280284] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.294856] devtmpfs: mounted [ 47.298227] Freeing unused kernel memory: 560K (c0a6e000 - c0afa000) [ 47.331407] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.619991] smps9: 2100 mV [ 47.623818] smps10_out2: 5000 mV [ 47.628042] smps10_out1: 5000 mV [ 47.631897] ldo1: 1500 <--> 1800 mV [ 47.636472] ldo2: 2800 mV [ 47.640796] ldo3: 1500 mV [ 47.644245] ldo4: 1500 <--> 1800 mV [ 47.649486] ldo5: 1800 mV [ 47.655328] ldo6: 1200 mV [ 47.659021] ldo7: 2000 mV [ 47.663379] ldo8: 3000 mV [ 47.667572] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.673721] ldoln: 1800 mV [ 47.678157] ldousb: 3250 mV [ 47.681658] REGEN1: no parameters [ 47.685205] REGEN2: no parameters [ 47.688894] regen3: no parameters [ 47.692706] SYSEN1: no parameters [ 47.696252] SYSEN2: no parameters [ 47.939632] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.946732] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.952966] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.960878] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.999706] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.013216] ALSA device list: [ 48.016316] No soundcards found. [ 48.020353] Waiting for root device /dev/mmcblk1p2... [ 48.056212] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.066411] mmc2: new high speed SDHC card at address 0001 [ 48.072370] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.077842] mmcblk1: p1 p2 [ 48.129859] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.138711] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.161080] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.169558] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.184130] devtmpfs: mounted [ 48.187493] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 48.220649] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.784301] VDAC: 1800 mV [ 1.784301] VANA: 2100 mV [ 1.791137] VCXIO: 1800 mV [ 1.791137] VUSB: 3300 mV [ 1.798034] V1V8: 1800 mV [ 1.801635] V2V1: 2100 mV [ 1.807586] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.879211] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.090118] hub 1-1:1.0: USB hub found [ 2.094360] hub 1-1:1.0: 5 ports detected [ 2.148986] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.379486] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.468109] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.491851] smsc95xx v1.0.4 [ 2.574249] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, fa:05:96:df:b4:88 [ 2.959045] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.965393] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.973175] gic_timer_retrigger: lost localtimer interrupt [ 2.979370] gic_timer_retrigger: lost localtimer interrupt [ 2.986328] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 3.043731] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 3.104431] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.114807] mmc0: new high speed SDHC card at address b368 [ 3.120880] mmcblk0: mmc0:b368 00000 7.51 GiB [ 3.126983] mmcblk0: p1 p2 [ 3.253906] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.267852] ALSA device list: [ 3.267913] No soundcards found. [ 3.274993] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 3.284790] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.294372] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.310455] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.317260] mmc1: new SDIO card at address 0001 [ 3.323272] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.331970] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.349304] devtmpfs: mounted [ 3.352874] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 3.403442] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.242682] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 2.264809] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.271605] hub 3-0:1.0: USB hub found [ 2.275423] hub 3-0:1.0: 1 port detected [ 2.280595] input: gpio-keys.4 as /devices/soc0/gpio-keys.4/input/input4 [ 2.287990] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-04-07 19:53:53 UTC (1396900433) [ 2.301233] ALSA device list: [ 2.304198] #0: NVIDIA Tegra Seaboard [ 2.309595] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 2.346057] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.354170] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 2.386961] devtmpfs: mounted [ 2.390430] Freeing unused kernel memory: 556K (c0a67000 - c0af2000) [ 2.464853] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.524922] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 2.525171] ------------[ cut here ]------------ [ 2.525190] WARNING: CPU: 1 PID: 24 at /home/build/work/batch/kernel/sched/core.c:1685 wake_up_process+0x40/0x44() [ 2.525195] Modules linked in: [ 2.525204] CPU: 1 PID: 24 Comm: khubd Not tainted 3.14.0-10773-gb8780c3 #1 [ 2.525243] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 2.525268] [<c0211768>] (show_stack) from [<c07c8b38>] (dump_stack+0x88/0x98) [ 2.525294] [<c07c8b38>] (dump_stack) from [<c02454b8>] (warn_slowpath_common+0x6c/0x88) [ 2.525309] [<c02454b8>] (warn_slowpath_common) from [<c0245570>] (warn_slowpath_null+0x1c/0x24) [ 2.525322] [<c0245570>] (warn_slowpath_null) from [<c026c108>] (wake_up_process+0x40/0x44) [ 2.525339] [<c026c108>] (wake_up_process) from [<c0249a50>] (__tasklet_schedule+0x68/0x74) [ 2.525360] [<c0249a50>] (__tasklet_schedule) from [<c05d7058>] (rh_call_control+0xb8/0x5bc) [ 2.525375] [<c05d7058>] (rh_call_control) from [<c05d7c14>] (usb_hcd_submit_urb+0xec/0x264) [ 2.525391] [<c05d7c14>] (usb_hcd_submit_urb) from [<c05d93ac>] (usb_start_wait_urb+0x4c/0xbc) [ 2.525405] [<c05d93ac>] (usb_start_wait_urb) from [<c05d94bc>] (usb_control_msg+0xa0/0xd0) [ 2.525418] [<c05d94bc>] (usb_control_msg) from [<c05cfa28>] (hub_port_status+0x74/0xfc) [ 2.525430] [<c05cfa28>] (hub_port_status) from [<c05d0f9c>] (hub_port_reset+0x280/0x3b8) [ 2.525442] [<c05d0f9c>] (hub_port_reset) from [<c05d2b40>] (hub_port_init+0x4c4/0xa90) [ 2.525455] [<c05d2b40>] (hub_port_init) from [<c05d3d18>] (hub_port_connect_change+0x14c/0x924) [ 2.525467] [<c05d3d18>] (hub_port_connect_change) from [<c05d4968>] (hub_events+0x478/0x754) [ 2.525479] [<c05d4968>] (hub_events) from [<c05d4c74>] (hub_thread+0x30/0x124) [ 2.525495] [<c05d4c74>] (hub_thread) from [<c02603b8>] (kthread+0xd8/0xf0) [ 2.525510] [<c02603b8>] (kthread) from [<c020e678>] (ret_from_fork+0x14/0x3c) [ 2.525515] ---[ end trace b29632d42da80281 ]--- ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.155 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-XKj2hp/tmpbQW0mL-uImage tftp 0x00100000 tmp/snowball-XKj2hp/tmpbQW0mL-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.155 Filename 'tmp/snowball-XKj2hp/tmpbQW0mL-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 4678097 (4761d1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4678033 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.928010] [<c07cd968>] (_raw_spin_lock_irqsave) from [<c027cf4c>] (__down_read_trylock+0x14/0x54) [ 3.937082] [<c027cf4c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 3.945447] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 3.953131] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 3.960522] Exception stack(0xea03bfd0 to 0xea03c018) [ 3.965580] bfc0: 0000017c 00000017 ea03c000 00000193 [ 3.973764] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 3.981944] c000: c0afe380 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 3.988569] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.994666] ---[ end trace 775ba24c8203bf75 ]--- [ 3.999288] Alignment trap: not handling instruction e1923f9f at [<c07cd964>] [ 4.006421] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 4.069763] ------------[ cut here ]------------ [ 4.074408] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/kernel/sched/core.c:1685 wake_up_process+0x40/0x44() [ 4.084657] Modules linked in: [ 4.087733] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-10773-gb8780c3 #1 [ 4.096031] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 4.103806] [<c0211768>] (show_stack) from [<c07c8b38>] (dump_stack+0x88/0x98) [ 4.111063] [<c07c8b38>] (dump_stack) from [<c02454b8>] (warn_slowpath_common+0x6c/0x88) [ 4.119171] [<c02454b8>] (warn_slowpath_common) from [<c0245570>] (warn_slowpath_null+0x1c/0x24) [ 4.127966] [<c0245570>] (warn_slowpath_null) from [<c026c108>] (wake_up_process+0x40/0x44) [ 4.136341] [<c026c108>] (wake_up_process) from [<c02a2950>] (watchdog_timer_fn+0x54/0x17c) [ 4.144706] [<c02a2950>] (watchdog_timer_fn) from [<c0262db0>] (__run_hrtimer.isra.32+0x54/0xe4) [ 4.153501] [<c0262db0>] (__run_hrtimer.isra.32) from [<c0263698>] (hrtimer_interrupt+0x11c/0x2d0) [ 4.162469] [<c0263698>] (hrtimer_interrupt) from [<c0215010>] (twd_handler+0x34/0x44) [ 4.170398] [<c0215010>] (twd_handler) from [<c02860f0>] (handle_percpu_devid_irq+0x6c/0x84) [ 4.178854] [<c02860f0>] (handle_percpu_devid_irq) from [<c02824c0>] (generic_handle_irq+0x2c/0x3c) [ 4.187912] [<c02824c0>] (generic_handle_irq) from [<c020eebc>] (handle_IRQ+0x40/0x90) [ 4.195837] [<c020eebc>] (handle_IRQ) from [<c0208884>] (gic_handle_irq+0x2c/0x5c) [ 4.203417] [<c0208884>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 4.210897] Exception stack(0xc0af3f28 to 0xc0af3f70) [ 4.215958] 3f20: 00000000 c0b34294 c0b34294 0000004c ed648988 00000000 [ 4.224140] 3f40: f1feb2e8 00000000 eafb3de8 c0af0de0 00000000 c0af2000 00000015 c0af3f70 [ 4.232315] 3f60: c0678a50 c0678a5c 60000113 ffffffff [ 4.237408] [<c02122c0>] (__irq_svc) from [<c0678a5c>] (cpuidle_enter_state+0x68/0x100) [ 4.245447] [<c0678a5c>] (cpuidle_enter_state) from [<c0278bc8>] (cpu_startup_entry+0x1c0/0x230) [ 4.254257] [<c0278bc8>] (cpu_startup_entry) from [<c0a67af0>] (start_kernel+0x348/0x354) [ 4.262429] ---[ end trace 775ba24c8203bf76 ]--- ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 mainline/v3.14-10773-gb8780c3/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.107 Filename 'mainline/v3.14-10773-gb8780c3/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 6.1 MiB/s done Bytes transferred = 4636784 (46c070 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 mainline/v3.14-10773-gb8780c3/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0node: wandboard status: on x11000000 mainline/v3.14-10773-gb8780c3/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.107 Filename 'mainline/v3.14-10773-gb8780c3/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1 MiB/s done Bytes transferred = 29143 (71d7 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46c070 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a1d6 Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 7 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports