Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

mainline boot: 47 pass, 2 fail (v3.15-rc3-41-g2aafe1a)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc3-41-g2aafe1a Failed boot tests (console logs at the end) =========================================== omap3-beagle-xm: FAIL: arm-multi_v7_defconfig sama5d35ek: FAIL: arm-sama5_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.3 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 55.6 sec: PASS am335x-boneblack 0 min 44.2 sec: PASS omap3-beagle-xm 1 min 0.6 sec: PASS legacy,3530beagle 0 min 34.0 sec: PASS (Warnings: 1) omap4-panda 1 min 8.5 sec: PASS omap3-overo-tobi 0 min 23.8 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 21.8 sec: PASS omap5-uevm 1 min 3.9 sec: PASS (Warnings: 1) omap3-n900 0 min 17.8 sec: PASS (Warnings: 1) legacy,n900 0 min 17.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 10.4 sec: PASS legacy,3730storm 0 min 20.3 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 17.4 sec: PASS arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.3 sec: PASS ste-snowball 1 min 18.0 sec: PASS tegra30-beaver 0 min 20.2 sec: PASS am335x-boneblack 0 min 37.5 sec: PASS omap3-beagle-xm 1 min 15.1 sec: FAIL sun7i-a20-cubieboard2 0 min 12.2 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 56.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 15.0 sec: PASS bcm28155-ap 0 min 28.2 sec: PASS omap3-overo-tobi 0 min 25.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap5-uevm 1 min 39.5 sec: PASS (Warnings: 1) omap3-n900 0 min 16.3 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.8 sec: PASS omap4-panda-es 0 min 53.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.7 sec: PASS sun4i-a10-cubieboard 0 min 13.0 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.9 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.1 sec: PASS exynos5250-arndale 0 min 29.7 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 32.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 1 min 42.6 sec: FAIL Console logs for failures ========================= arm-multi_v7_defconfig ---------------------- omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org #if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:tmp/3730xm-c0gYwP/zImage tftp 0x81000000 192.168.1.2:tmp/3730xm-c0gYwP/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-c0gYwP/zImage'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 434.6 KiB/s done Bytes transferred = 4682568 (477348 hex) OMAP3 beagleboard.org # tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *T ############################################ 109.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-c0gYwP/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-c0gYwP/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-c0gYwP/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T ##### 11.7 KiB/s done Bytes transferred = 60981 (ee35 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 OMAP3 beagleboard.org # bootz 0x81000000 0x82000000 0x81f00000 bootz 0x81000000 0x82000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62e34 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 75.06 seconds. # PYBOOT: Result: FAIL arm-sama5_defconfig ------------------- sama5d35ek: FAIL: last 80 lines of boot log: -------------------------------------------- UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f1a4>] (ubi_io_read_ec_hdr+0x44/0x1e8) [<c023f1a4>] (ubi_io_read_ec_hdr) from [<c02438e0>] (scan_all.constprop.8+0xb8/0x950) [<c02438e0>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f390>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f390>] (ubi_io_read_vid_hdr) from [<c0243980>] (scan_all.constprop.8+0x158/0x950) [<c0243980>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f1a4>] (ubi_io_read_ec_hdr+0x44/0x1e8) [<c023f1a4>] (ubi_io_read_ec_hdr) from [<c02438e0>] (scan_all.constprop.8+0xb8/0x950) [<c02438e0>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f390>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f390>] (ubi_io_read_vid_hdr) from [<c0243980>] (scan_all.constprop.8+0x158/0x950) [<c0243980>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>]~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 102.63 seconds. # PYBOOT: Result: FAIL

11 years, 6 months

mainline boot: 48 pass, 1 fail (v3.15-rc3-39-g87c7662)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc3-39-g87c7662 Failed boot tests (console logs at the end) =========================================== sama5d35ek: FAIL: arm-sama5_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.3 sec: PASS da850-evm 0 min 15.3 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.2 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 51.1 sec: PASS am335x-boneblack 0 min 43.6 sec: PASS omap3-beagle-xm 0 min 59.6 sec: PASS legacy,3530beagle 0 min 45.9 sec: PASS (Warnings: 1) omap4-panda 1 min 6.9 sec: PASS omap3-overo-tobi 0 min 23.7 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 24.7 sec: PASS omap5-uevm 1 min 8.4 sec: PASS (Warnings: 1) omap3-n900 0 min 16.5 sec: PASS (Warnings: 1) legacy,n900 0 min 16.3 sec: PASS (Warnings: 1) omap4-panda-es 1 min 6.4 sec: PASS legacy,3730storm 0 min 23.4 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.1 sec: PASS ste-snowball 1 min 21.2 sec: PASS tegra30-beaver 0 min 25.2 sec: PASS am335x-boneblack 0 min 37.8 sec: PASS omap3-beagle-xm 0 min 48.2 sec: PASS sun7i-a20-cubieboard2 0 min 12.5 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 52.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.6 sec: PASS sun4i-a10-cubieboard 0 min 19.0 sec: PASS bcm28155-ap 0 min 27.0 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.5 sec: PASS am335x-bone 0 min 26.9 sec: PASS omap3-overo-storm-tobi 0 min 20.3 sec: PASS omap5-uevm 1 min 40.5 sec: PASS (Warnings: 1) omap3-n900 0 min 16.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.8 sec: PASS omap4-panda-es 0 min 53.4 sec: PASS imx6dl-wandboard,wand-dual 0 min 17.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 17.9 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 25.0 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 33.9 sec: PASS exynos5250-arndale 0 min 30.2 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 30.5 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 1 min 42.5 sec: FAIL Console logs for failures ========================= arm-sama5_defconfig ------------------- sama5d35ek: FAIL: last 80 lines of boot log: -------------------------------------------- [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f1a4>] (ubi_io_read_ec_hdr+0x44/0x1e8) [<c023f1a4>] (ubi_io_read_ec_hdr) from [<c02438e0>] (scan_all.constprop.8+0xb8/0x950) [<c02438e0>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f390>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f390>] (ubi_io_read_vid_hdr) from [<c0243980>] (scan_all.constprop.8+0x158/0x950) [<c0243980>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f1a4>] (ubi_io_read_ec_hdr+0x44/0x1e8) [<c023f1a4>] (ubi_io_read_ec_hdr) from [<c02438e0>] (scan_all.constprop.8+0xb8/0x950) [<c02438e0>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f390>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f390>] (ubi_io_read_vid_hdr) from [<c0243980>] (scan_all.constprop.8+0x158/0x950) [<c0243980>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144)~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 102.48 seconds. # PYBOOT: Result: FAIL

11 years, 6 months

next boot: 29 passed 3 failed (next/next-20140429)

by Olof's autobooter

Failed boards: capri multi_v7_defconfig : FAILED 1:02.37 cubie2 sunxi_defconfig : FAILED 1:21.03 snowball multi_v7_defconfig : FAILED 1:08.64 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.95 arndale exynos_defconfig : passed 1:06.48 bbb omap2plus_defconfig : passed 1:25.91 bbb multi_v7_defconfig : passed 1:22.26 beaver tegra_defconfig : passed 0:53.97 beaver multi_v7_defconfig : passed 0:49.69 capri bcm_defconfig : passed 0:43.13 cubie sunxi_defconfig : passed 1:06.59 cubie multi_v7_defconfig : passed 0:55.51 cubie2 multi_v7_defconfig : passed 1:12.23 cubie2 multi_lpae_defconfig : passed 1:04.02 dalmore tegra_defconfig : passed 1:29.53 dalmore multi_v7_defconfig : passed 1:16.87 dalmore multi_lpae_defconfig : passed 1:17.61 hummingboard imx_v6_v7_defconfig : passed 1:17.31 hummingboard multi_v7_defconfig : passed 1:07.19 omap5uevm multi_v7_defconfig : warnings 1:48.03 omap5uevm multi_lpae_defconfig : warnings 1:43.09 panda omap2plus_defconfig : warnings 1:09.97 panda multi_v7_defconfig : warnings 1:24.70 sama5 sama5_defconfig : passed 1:54.33 seaboard tegra_defconfig : passed 1:15.58 seaboard multi_v7_defconfig : passed 1:11.38 snow exynos_defconfig : passed 1:29.31 snowball u8500_defconfig : passed 1:16.90 trimslice tegra_defconfig : passed 1:02.86 trimslice multi_v7_defconfig : passed 1:28.55 wandboard imx_v6_v7_defconfig : passed 0:53.25 wandboard multi_v7_defconfig : passed 0:53.88 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:25.46 Board legend is available at http://arm-soc.lixom.net/boards.html Board capri-multi_v7_defconfig failure log: ------------------------------------------------- (user:build) Load fastboot kernel GET_DESC ->STRING DESC sending 'kernel' (4553 KB)... ................................................................................ .............................................................. OKAY [ 0.946s] writing 'kernel'... downloading of 4663184 bytes finished Flashing Raw Image Writing to partition 'kernel' WritinOKAY [ 0.814s] finished. total time: 1.760s g 'kernel' DONE! GET_DESC ->STRING DESC sending 'device-tree' (7 KB)... OKAY [ 0.002s] writing 'device-tree'... downloading of 7575 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'deOKAY [ 0.012s] finished. total time: 0.014s vice-tree' DONE! GET_DESC -resuming boot... >STRING DESC OKAY [ 0.001s] finished. total time: 0.001s MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004d96 Starting kernel ... ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.018235] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.018258] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.018271] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.018290] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.018304] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.019344] Switched to clocksource arch_sys_counter [ 0.026566] NET: Registered protocol family 2 [ 0.027035] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.027121] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027244] TCP: Hash tables configured (established 8192 bind 8192) [ 0.027328] TCP: reno registered [ 0.027342] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.027397] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027622] NET: Registered protocol family 1 [ 0.028038] RPC: Registered named UNIX socket transport module. [ 0.028051] RPC: Registered udp transport module. [ 0.028058] RPC: Registered tcp transport module. [ 0.028064] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.029129] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.029810] bounce: pool size: 64 pages [ 0.037631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.037654] io scheduler noop registered [ 0.037667] io scheduler deadline registered [ 0.037851] io scheduler cfq registered (default) [ 0.039603] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.081731] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.084155] console [ttyS0] disabled [ 0.104356] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.619783] console [ttyS0] enabled [ 0.624567] mousedev: PS/2 mouse device common for all mice [ 0.630473] i2c /dev entries driver [ 0.635294] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.644448] TCP: cubic registered [ 0.647775] NET: Registered protocol family 17 [ 0.652359] Registering SWP/SWPB emulation handler [ 0.658150] ahci-5v: 5000 mV [ 0.661451] usb1-vbus: 5000 mV [ 0.664815] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.106 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmpA9jBvw-uImage tftp 0x01000000 tmpA9jBvw-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'tmpA9jBvw-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4704497 (47c8f1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4704433 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 6 months

next build: 241 warnings 0 failures (next/next-20140429)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 7cd285f Add linux-next specific files for 20140429 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140429/ Runtime: 41m 22s Passed: 124 Failed: 0 Warnings: 241 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 6 include/linux/bitops.h:48) [-Wdeprecated-declarations] 111 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

11 years, 6 months

mainline boot: 31 passed 2 failed (mainline/v3.15-rc3-41-g2aafe1a)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.44 snowball multi_v7_defconfig : FAILED 1:13.14 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:18.16 arndale exynos_defconfig : passed 1:06.26 bbb omap2plus_defconfig : passed 1:38.09 bbb multi_v7_defconfig : passed 1:19.04 beaver tegra_defconfig : passed 0:52.86 beaver multi_v7_defconfig : passed 0:49.03 capri bcm_defconfig : passed 0:43.15 capri multi_v7_defconfig : passed 0:45.13 cubie sunxi_defconfig : passed 1:02.88 cubie multi_v7_defconfig : passed 1:08.44 cubie2 multi_v7_defconfig : passed 1:09.87 cubie2 multi_lpae_defconfig : passed 1:10.06 dalmore tegra_defconfig : passed 1:23.04 dalmore multi_v7_defconfig : passed 1:20.09 dalmore multi_lpae_defconfig : passed 1:19.08 hummingboard imx_v6_v7_defconfig : passed 1:19.63 hummingboard multi_v7_defconfig : passed 1:07.66 omap5uevm omap2plus_defconfig : warnings 1:03.01 omap5uevm multi_v7_defconfig : warnings 1:44.99 omap5uevm multi_lpae_defconfig : warnings 1:41.42 panda omap2plus_defconfig : warnings 1:12.57 panda multi_v7_defconfig : passed 1:21.76 sama5 sama5_defconfig : passed 1:54.88 seaboard tegra_defconfig : passed 1:01.42 seaboard multi_v7_defconfig : passed 1:06.93 snow exynos_defconfig : passed 1:29.37 snowball u8500_defconfig : passed 1:15.01 trimslice tegra_defconfig : passed 1:02.64 trimslice multi_v7_defconfig : passed 0:58.86 wandboard imx_v6_v7_defconfig : passed 0:55.97 wandboard multi_v7_defconfig : passed 0:52.56 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017711] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017734] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017747] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017766] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017779] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018718] Switched to clocksource arch_sys_counter [ 0.025859] NET: Registered protocol family 2 [ 0.026333] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026421] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026543] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026626] TCP: reno registered [ 0.026643] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026698] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026896] NET: Registered protocol family 1 [ 0.027290] RPC: Registered named UNIX socket transport module. [ 0.027302] RPC: Registered udp transport module. [ 0.027308] RPC: Registered tcp transport module. [ 0.027313] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028278] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028845] bounce pool size: 64 pages [ 0.036567] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036584] io scheduler noop registered [ 0.036591] io scheduler deadline registered [ 0.036775] io scheduler cfq registered (default) [ 0.038411] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080596] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083008] console [ttyS0] disabled [ 0.103201] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618696] console [ttyS0] enabled [ 0.623414] mousedev: PS/2 mouse device common for all mice [ 0.629283] i2c /dev entries driver [ 0.634082] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643073] TCP: cubic registered [ 0.646393] NET: Registered protocol family 17 [ 0.650956] Registering SWP/SWPB emulation handler [ 0.656670] ahci-5v: 5000 mV [ 0.659956] usb1-vbus: 5000 mV [ 0.663313] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.102 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmppX0qAa-uImage tftp 0x01000000 tmppX0qAa-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.102 Filename 'tmppX0qAa-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690217 (479129 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690153 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 6 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc3-41-g2aafe1a)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 2aafe1a Merge tag 'trace-fixes-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc3-41-g2aafe1a/ Runtime: 41m 36s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

11 years, 6 months

mainline boot: 29 passed 3 failed (mainline/v3.15-rc3-39-g87c7662)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:22.04 panda multi_v7_defconfig : FAILED 1:33.93 snowball multi_v7_defconfig : FAILED 1:08.34 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.02 arndale exynos_defconfig : passed 1:06.96 bbb omap2plus_defconfig : passed 1:37.82 bbb multi_v7_defconfig : passed 1:22.33 beaver tegra_defconfig : passed 0:57.74 beaver multi_v7_defconfig : passed 1:00.70 capri bcm_defconfig : passed 0:43.44 capri multi_v7_defconfig : passed 0:44.70 cubie sunxi_defconfig : passed 1:09.11 cubie multi_v7_defconfig : passed 1:27.30 cubie2 multi_v7_defconfig : passed 1:11.68 cubie2 multi_lpae_defconfig : passed 1:16.45 dalmore tegra_defconfig : passed 1:24.04 dalmore multi_v7_defconfig : passed 1:14.07 dalmore multi_lpae_defconfig : passed 1:20.71 hummingboard imx_v6_v7_defconfig : passed 1:19.75 hummingboard multi_v7_defconfig : passed 1:06.30 omap5uevm multi_v7_defconfig : warnings 1:41.67 omap5uevm multi_lpae_defconfig : warnings 1:38.82 panda omap2plus_defconfig : warnings 1:08.60 sama5 sama5_defconfig : passed 1:54.51 seaboard tegra_defconfig : passed 1:01.43 seaboard multi_v7_defconfig : passed 1:05.97 snow exynos_defconfig : passed 1:31.65 snowball u8500_defconfig : passed 1:22.68 trimslice tegra_defconfig : passed 1:01.68 trimslice multi_v7_defconfig : passed 1:09.91 wandboard imx_v6_v7_defconfig : passed 0:56.63 wandboard multi_v7_defconfig : passed 0:57.92 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:09.19 Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017646] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017669] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017682] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017704] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017715] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018654] Switched to clocksource arch_sys_counter [ 0.025791] NET: Registered protocol family 2 [ 0.026263] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026355] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026475] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026563] TCP: reno registered [ 0.026576] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026633] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026828] NET: Registered protocol family 1 [ 0.027214] RPC: Registered named UNIX socket transport module. [ 0.027227] RPC: Registered udp transport module. [ 0.027233] RPC: Registered tcp transport module. [ 0.027239] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028208] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028764] bounce pool size: 64 pages [ 0.036496] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036514] io scheduler noop registered [ 0.036521] io scheduler deadline registered [ 0.036702] io scheduler cfq registered (default) [ 0.038353] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080495] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082928] console [ttyS0] disabled [ 0.103122] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618625] console [ttyS0] enabled [ 0.623344] mousedev: PS/2 mouse device common for all mice [ 0.629218] i2c /dev entries driver [ 0.634013] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643009] TCP: cubic registered [ 0.646330] NET: Registered protocol family 17 [ 0.650890] Registering SWP/SWPB emulation handler [ 0.656618] ahci-5v: 5000 mV [ 0.659910] usb1-vbus: 5000 mV [ 0.663268] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.624786] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.632476] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.639373] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.647277] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.654205] usbcore: registered new interface driver usbhid [ 1.660064] usbhid: USB HID core driver [ 1.668121] TCP: cubic registered [ 1.671630] NET: Registered protocol family 17 [ 1.676483] Key type dns_resolver registered [ 1.681427] Power Management for TI OMAP4+ devices. [ 1.686553] Power Management for TI OMAP4. [ 1.690887] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.698028] ThumbEE CPU extension supported. [ 1.702758] Registering SWP/SWPB emulation handler [ 1.708526] vwl1271: 1800 mV [ 1.713012] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.722961] twl 0-0048: PIH (irq 39) nested IRQs [ 1.728637] twl_rtc rtc.15: Power up reset detected. [ 1.734527] twl_rtc rtc.15: Enabling TWL-RTC [ 1.741516] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.748382] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.754516] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.760589] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.766754] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.772308] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.777740] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.782745] VDAC: 1800 mV [ 1.786499] VANA: 2100 mV [ 1.790069] VCXIO: 1800 mV [ 1.792999] VUSB: 3300 mV [ 1.797027] V1V8: 1800 mV [ 1.800598] V2V1: 2100 mV [ 1.879394] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.139862] hub 1-1:1.0: USB hub found [ 2.144104] hub 1-1:1.0: 5 ports detected [ 2.548248] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.675933] smsc95xx v1.0.4 [ 2.773742] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 7a:3c:8d:21:d1:9b ~$off # PYBOOT: Exception: timeout Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.102 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $tftp 0x01000000 tmprfYVLs-uImage tftp 0x01000000 tmprfYVLs-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.102 Filename 'tmprfYVLs-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690209 (479121 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690145 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 6 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc3-39-g87c7662)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 87c7662 Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc3-39-g87c7662/ Runtime: 41m 40s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

11 years, 6 months

Tegra baseline test results for v3.15-rc3

by Paul Walmsley

Here are some basic Tegra test results for Linux v3.15-rc3. Logs and other details at: http://nvt.pwsan.com/pub/linux/testlogs/test_v3.15-rc3/20140427210106/ Test summary ------------ Build: zImage: Pass: ( 2/ 2): multi_v7_defconfig, tegra_defconfig Boot to userspace: multi_v7_defconfig: Pass: ( 2/ 2): tegra114-dalmore-a04, tegra30-beaver Boot to userspace: tegra_defconfig: Pass: ( 2/ 2): tegra114-dalmore-a04, tegra30-beaver vmlinux object size (delta in bytes from test_v3.15-rc2 (a798c10faf62a505d24e5f6213fbaf904a39623f)): text data bss total kernel +1184 -8 0 +1176 multi_v7_defconfig +752 0 0 +752 tegra_defconfig Boot-time memory difference (delta in bytes from test_v3.15-rc2 (a798c10faf62a505d24e5f6213fbaf904a39623f)) avail rsrvd high freed board kconfig dtb . . . . tegra114-dalmore-a04 multi_v7_defconfig tegra114-dalmore -8k 8k . . tegra114-dalmore-a04 tegra_defconfig tegra114-dalmore . . . . tegra30-beaver multi_v7_defconfig tegra30-beaver -8k 8k . . tegra30-beaver tegra_defconfig tegra30-beaver

11 years, 6 months

arm-soc boot: 30 passed 3 failed (arm-soc/v3.15-rc2-75-g30bec9e)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.52 panda multi_v7_defconfig : FAILED 1:34.34 snowball multi_v7_defconfig : FAILED 1:13.31 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:19.33 arndale exynos_defconfig : passed 1:05.95 bbb omap2plus_defconfig : passed 1:37.43 bbb multi_v7_defconfig : passed 1:19.08 beaver tegra_defconfig : passed 1:07.06 beaver multi_v7_defconfig : passed 0:49.05 capri bcm_defconfig : passed 0:45.72 capri multi_v7_defconfig : passed 0:44.28 cubie sunxi_defconfig : passed 1:10.03 cubie multi_v7_defconfig : passed 1:16.28 cubie2 multi_v7_defconfig : passed 1:18.12 cubie2 multi_lpae_defconfig : passed 1:23.02 dalmore tegra_defconfig : passed 1:21.42 dalmore multi_v7_defconfig : passed 1:14.77 dalmore multi_lpae_defconfig : passed 1:16.03 hummingboard imx_v6_v7_defconfig : passed 1:22.97 hummingboard multi_v7_defconfig : passed 1:08.05 omap5uevm omap2plus_defconfig : warnings 1:11.75 omap5uevm multi_v7_defconfig : warnings 1:48.92 omap5uevm multi_lpae_defconfig : warnings 1:40.40 panda omap2plus_defconfig : warnings 1:15.97 sama5 sama5_defconfig : passed 1:48.77 seaboard tegra_defconfig : passed 1:04.03 seaboard multi_v7_defconfig : passed 1:25.50 snow exynos_defconfig : passed 1:26.21 snowball u8500_defconfig : passed 2:11.05 trimslice tegra_defconfig : passed 1:01.62 trimslice multi_v7_defconfig : passed 1:07.41 wandboard imx_v6_v7_defconfig : passed 1:05.74 wandboard multi_v7_defconfig : passed 1:02.41 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017673] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017696] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017709] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017728] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017741] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018682] Switched to clocksource arch_sys_counter [ 0.025821] NET: Registered protocol family 2 [ 0.026291] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026378] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026498] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026581] TCP: reno registered [ 0.026595] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026651] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026852] NET: Registered protocol family 1 [ 0.027249] RPC: Registered named UNIX socket transport module. [ 0.027262] RPC: Registered udp transport module. [ 0.027268] RPC: Registered tcp transport module. [ 0.027274] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028243] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028781] bounce pool size: 64 pages [ 0.036542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036561] io scheduler noop registered [ 0.036567] io scheduler deadline registered [ 0.036752] io scheduler cfq registered (default) [ 0.038408] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080469] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082876] console [ttyS0] disabled [ 0.103076] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618577] console [ttyS0] enabled [ 0.623299] mousedev: PS/2 mouse device common for all mice [ 0.629178] i2c /dev entries driver [ 0.633964] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642947] TCP: cubic registered [ 0.646271] NET: Registered protocol family 17 [ 0.650833] Registering SWP/SWPB emulation handler [ 0.656558] ahci-5v: 5000 mV [ 0.659836] usb1-vbus: 5000 mV [ 0.663193] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.646972] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.653839] usbcore: registered new interface driver usbhid [ 1.659698] usbhid: USB HID core driver [ 1.667663] TCP: cubic registered [ 1.671173] NET: Registered protocol family 17 [ 1.676025] Key type dns_resolver registered [ 1.680969] Power Management for TI OMAP4+ devices. [ 1.686126] Power Management for TI OMAP4. [ 1.690460] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.697570] ThumbEE CPU extension supported. [ 1.702362] Registering SWP/SWPB emulation handler [ 1.708404] vwl1271: 1800 mV [ 1.712585] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.722503] twl 0-0048: PIH (irq 39) nested IRQs [ 1.728118] twl_rtc rtc.15: Power up reset detected. [ 1.734008] twl_rtc rtc.15: Enabling TWL-RTC [ 1.740905] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.747863] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.753936] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.759979] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.766082] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.771636] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.777069] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.782073] VDAC: 1800 mV [ 1.782073] VANA: 2100 mV [ 1.789337] VCXIO: 1800 mV [ 1.792724] VUSB: 3300 mV [ 1.796295] V1V8: 1800 mV [ 1.799896] V2V1: 2100 mV [ 1.805908] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.879302] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.031372] hub 1-1:1.0: USB hub found [ 2.035705] hub 1-1:1.0: 5 ports detected [ 2.100646] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.299835] gic_timer_retrigger: lost localtimer interrupt [ 2.319458] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.389221] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 11.619262] [sched_delayed] sched: RT throttling activated ~$off # PYBOOT: Exception: timeout Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.100 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmpzf10Se-uImage tftp 0x01000000 tmpzf10Se-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.100 Filename 'tmpzf10Se-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# #########################################T ######################## ################################################################# ############################################################ done Bytes transferred = 4690361 (4791b9 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690297 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 6 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports