Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

mainline build: 246 warnings 0 failures (mainline/v3.16-rc2-35-g8b8f5d9)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 8b8f5d9 Merge tag 'compress-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.16-rc2-35-g8b8f5d9/ Runtime: 46m 2s Passed: 126 Failed: 0 Warnings: 246 Section mismatches: 16 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 2 buildall.arm.omap1_defconfig.log.passed:warning: (ARCH_OMAP1) selects ARCH_OMAP which has unmet direct dependencies (ARCH_MULTI_V6 || ARCH_MULTI_V7) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ee8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

11 years, 5 months

Tegra baseline test results for v3.16-rc1

by Paul Walmsley

Here are some basic Tegra test results for Linux v3.16-rc1. Logs and other details at: http://nvt.pwsan.com/pub/linux/testlogs/test_v3.16-rc1/20140615210102/ Test summary ------------ Build: zImage: Pass: ( 2/ 2): multi_v7_defconfig, tegra_defconfig Boot to userspace: multi_v7_defconfig: FAIL: ( 2/ 2): tegra114-dalmore-a04, tegra30-beaver Boot to userspace: tegra_defconfig: Pass: ( 2/ 2): tegra114-dalmore-a04, tegra30-beaver vmlinux object size (delta in bytes from test_v3.15 (1860e379875dfe7271c649058aeddffe5afd9d0d)): text data bss total kernel +438973 +168256 +14472 +621701 multi_v7_defconfig +136940 -408 +12724 +149256 tegra_defconfig Boot-time memory difference (delta in bytes from test_v3.15 (1860e379875dfe7271c649058aeddffe5afd9d0d)) avail rsrvd high freed board kconfig dtb -636k 636k . -548k tegra114-dalmore-a04 multi_v7_defconfig tegra114-dalmore -148k 148k . 4k tegra114-dalmore-a04 tegra_defconfig tegra114-dalmore -636k 636k . -548k tegra30-beaver multi_v7_defconfig tegra30-beaver -148k 148k . 4k tegra30-beaver tegra_defconfig tegra30-beaver

11 years, 5 months

next boot: 39 passed 2 failed (next/next-20140623)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20140623/ Failed boards: capri bcm_defconfig : FAILED 1:24.15 capri multi_v7_defconfig : FAILED 1:24.60 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.19 arndale exynos_defconfig : passed 1:18.27 arndale multi_v7_defconfig : passed 1:29.76 arndale multi_lpae_defconfig : passed 1:20.57 bbb omap2plus_defconfig : passed 1:31.08 bbb multi_v7_defconfig : passed 1:15.60 beaver tegra_defconfig : passed 1:04.46 beaver multi_v7_defconfig : passed 1:06.82 cubie sunxi_defconfig : passed 1:30.40 cubie multi_v7_defconfig : passed 1:32.16 cubie2 sunxi_defconfig : passed 1:26.16 cubie2 multi_v7_defconfig : passed 1:39.97 cubie2 multi_lpae_defconfig : passed 1:27.22 cubox multi_v7_defconfig : passed 1:25.28 dalmore tegra_defconfig : passed 1:33.90 dalmore multi_v7_defconfig : passed 1:22.11 dalmore multi_lpae_defconfig : passed 1:26.54 hummingboard imx_v6_v7_defconfig : passed 1:43.14 hummingboard multi_v7_defconfig : passed 1:24.24 jetson tegra_defconfig : passed 1:11.20 jetson multi_v7_defconfig : passed 1:02.26 jetson multi_lpae_defconfig : passed 0:55.84 omap5uevm omap2plus_defconfig : warnings 1:08.27 omap5uevm multi_v7_defconfig : warnings 2:03.16 omap5uevm multi_lpae_defconfig : warnings 1:52.58 panda omap2plus_defconfig : warnings 1:30.96 panda multi_v7_defconfig : warnings 1:59.12 sama5 sama5_defconfig : warnings 2:13.23 seaboard tegra_defconfig : passed 0:59.95 seaboard multi_v7_defconfig : passed 1:16.15 snow exynos_defconfig : passed 0:56.47 snow multi_v7_defconfig : passed 1:05.79 snow multi_lpae_defconfig : passed 1:00.68 snowball u8500_defconfig : passed 1:57.62 snowball multi_v7_defconfig : passed 3:05.17 trimslice tegra_defconfig : passed 1:10.15 trimslice multi_v7_defconfig : passed 0:59.51 wandboard imx_v6_v7_defconfig : passed 1:07.04 wandboard multi_v7_defconfig : passed 0:59.41 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1800 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.650000] sdhci-kona 3f190000.sdio: Failed sdhci_add_host [ 0.665000] sdhci-kona 3f190000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.670000] platform 3f190000.sdio: Driver sdhci-kona requests probe deferral [ 0.675000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.700000] sdhci-kona 3f1b0000.sdio: Failed sdhci_add_host [ 0.715000] sdhci-kona 3f1b0000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.720000] platform 3f1b0000.sdio: Driver sdhci-kona requests probe deferral [ 0.725000] usbcore: registered new interface driver usbhid [ 0.730000] usbhid: USB HID core driver [ 0.735000] TCP: cubic registered [ 0.735000] NET: Registered protocol family 17 [ 0.740000] can: controller area network core (rev 20120528 abi 9) [ 0.745000] NET: Registered protocol family 29 [ 0.745000] can: raw protocol (rev 20120528) [ 0.750000] can: broadcast manager protocol (rev 20120528 t) [ 0.755000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.760000] Key type dns_resolver registered [ 0.760000] ThumbEE CPU extension supported. [ 0.765000] Registering SWP/SWPB emulation handler [ 0.790000] sdhci-kona 3f190000.sdio: Failed sdhci_add_host [ 0.805000] sdhci-kona 3f190000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.810000] platform 3f190000.sdio: Driver sdhci-kona requests probe deferral [ 0.815000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.840000] sdhci-kona 3f1b0000.sdio: Failed sdhci_add_host [ 0.855000] sdhci-kona 3f1b0000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.860000] platform 3f1b0000.sdio: Driver sdhci-kona requests probe deferral [ 0.865000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.870000] ALSA device list: [ 0.870000] No soundcards found. [ 0.875000] Waiting for root device /dev/mmcblk0p8... [ 41.280000] random: nonblocking pool is initialized ~$off # PYBOOT: Exception: timeout

11 years, 5 months

next build: 681 warnings 7 failures (next/next-20140623)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 58ae500 Add linux-next specific files for 20140623 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140623/ Runtime: 41m 11s Passed: 119 Failed: 7 Warnings: 681 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: at91x40_defconfig clps711x_defconfig collie_defconfig efm32_defconfig omap1_defconfig tct_hammer_defconfig xcep_defconfig ------------------------------------------------------------------------------- Errors: at91x40_defconfig: mm/swap.c:720:2: error: implicit declaration of function 'TestSetPageMlocked' [-Werror=implicit-function-declaration] clps711x_defconfig: mm/slab.h:322:10: error: 'struct kmem_cache' has no member named 'node' mm/slab.h:322:10: error: 'struct kmem_cache' has no member named 'node' collie_defconfig: mm/slab.h:322:10: error: 'struct kmem_cache' has no member named 'node' mm/slab.h:322:10: error: 'struct kmem_cache' has no member named 'node' efm32_defconfig: mm/swap.c:720:2: error: implicit declaration of function 'TestSetPageMlocked' [-Werror=implicit-function-declaration] omap1_defconfig: mm/slab.h:322:10: error: 'struct kmem_cache' has no member named 'node' mm/slab.h:322:10: error: 'struct kmem_cache' has no member named 'node' drivers/spi/spi-omap-uwire.c:465:2: error: implicit declaration of function 'devm_ioremap' [-Werror=implicit-function-declaration] tct_hammer_defconfig: mm/slab.h:322:10: error: 'struct kmem_cache' has no member named 'node' mm/slab.h:322:10: error: 'struct kmem_cache' has no member named 'node' xcep_defconfig: mm/slab.h:322:10: error: 'struct kmem_cache' has no member named 'node' mm/slab.h:322:10: error: 'struct kmem_cache' has no member named 'node' Warnings: 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/spi/spi-omap-uwire.c:465:13: warning: assignment makes pointer from integer without a cast [enabled by default] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 include/linux/of.h:773:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 2 buildall.arm.omap1_defconfig.log.failed:warning: (ARCH_OMAP1) selects ARCH_OMAP which has unmet direct dependencies (ARCH_MULTI_V6 || ARCH_MULTI_V7) 2 crypto/zlib.c:171:2: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uLong' [-Wformat=] 2 crypto/zlib.c:171:2: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'uLong' [-Wformat=] 2 crypto/zlib.c:171:2: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'long unsigned int' [-Wformat=] 2 crypto/zlib.c:201:2: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uLong' [-Wformat=] 2 crypto/zlib.c:201:2: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'uLong' [-Wformat=] 2 crypto/zlib.c:201:2: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'long unsigned int' [-Wformat=] 2 crypto/zlib.c:286:2: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uLong' [-Wformat=] 2 crypto/zlib.c:286:2: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'uLong' [-Wformat=] 2 crypto/zlib.c:286:2: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'long unsigned int' [-Wformat=] 2 crypto/zlib.c:334:2: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uLong' [-Wformat=] 2 crypto/zlib.c:334:2: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'uLong' [-Wformat=] 2 crypto/zlib.c:334:2: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'long unsigned int' [-Wformat=] 2 include/linux/dynamic_debug.h:64:16: warning: format '%d' expects argument of type 'int', but argument 3 has type 'uLong' [-Wformat=] 2 include/linux/dynamic_debug.h:64:16: warning: format '%d' expects argument of type 'int', but argument 4 has type 'uLong' [-Wformat=] 28 sound/soc/soc-dapm.c:2851:15: warning: 'reg_val' may be used uninitialized in this function [-Wmaybe-uninitialized] 55 mm/slab.c:1311:4: warning: passing argument 2 of 'slab_set_debugobj_lock_classes_node' makes integer from pointer without a cast [enabled by default] 65 fs/jffs2/compr_zlib.c:101:3: warning: format '%d' expects argument of type 'int', but argument 2 has type 'uLong' [-Wformat=] 65 fs/jffs2/compr_zlib.c:101:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'uLong' [-Wformat=] 65 fs/jffs2/compr_zlib.c:98:3: warning: format '%d' expects argument of type 'int', but argument 2 has type 'uLong' [-Wformat=] 65 fs/jffs2/compr_zlib.c:98:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'uLong' [-Wformat=] 70 include/linux/kernel.h:713:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches:

11 years, 5 months

next boot: 64 boots: 63 pass, 1 fail (next-20140623)

by Kevin's boot bot

Full logs here: http://armcloud.us/kernel-ci/next/next-20140623 Tree/Branch: next Git describe: next-20140623 Failed boot tests ================= exynos5420-arndale-octa: FAIL: arm-exynos_defconfig http://armcloud.us/kernel-ci/next/next-20140623/arm-exynos_defconfig/boot-e… Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 18.5 sec: PASS da850-evm 0 min 16.4 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 18.7 sec: PASS tegra30-beaver 0 min 18.1 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 18.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.4 sec: PASS omap5-uevm 1 min 43.9 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.6 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.3 sec: PASS armada-370-mirabox 0 min 21.0 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 37.3 sec: PASS am335x-boneblack 0 min 22.8 sec: PASS omap3-beagle-xm 0 min 44.4 sec: PASS legacy,3530beagle 0 min 30.5 sec: PASS (Warnings: 1) omap4-panda 1 min 3.5 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.9 sec: PASS am335x-bone 0 min 24.8 sec: PASS omap3-overo-storm-tobi 0 min 26.0 sec: PASS omap5-uevm 0 min 53.2 sec: PASS (Warnings: 1) omap3-n900 0 min 17.4 sec: PASS legacy,n900 0 min 16.9 sec: PASS (Warnings: 2) omap4-panda-es 0 min 51.6 sec: PASS (Warnings: 1) legacy,3730storm 0 min 21.4 sec: PASS legacy,3530overo 0 min 22.2 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.9 sec: PASS am335x-boneblack 0 min 22.6 sec: PASS sun7i-a20-cubieboard2 0 min 13.6 sec: PASS sun4i-a10-cubieboard 0 min 18.0 sec: PASS exynos5410-smdk5410 0 min 29.6 sec: PASS am335x-bone 0 min 29.3 sec: PASS tegra124-jetson-tk1 0 min 18.8 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 55.7 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.8 sec: PASS ste-snowball 1 min 19.6 sec: PASS tegra30-beaver 0 min 25.5 sec: PASS omap3-n900 0 min 17.2 sec: PASS qcom-apq8074-dragonboard 0 min 20.2 sec: PASS bcm28155-ap 0 min 27.2 sec: PASS omap3-overo-tobi 0 min 22.7 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap3-beagle-xm 0 min 50.3 sec: PASS exynos5420-arndale-octa 0 min 40.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.5 sec: PASS omap5-uevm 1 min 43.8 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.0 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 38.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 12.1 sec: PASS sun4i-a10-cubieboard 0 min 12.0 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 19.3 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.4 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 37.4 sec: FAIL exynos5250-arndale 0 min 30.6 sec: PASS exynos5410-smdk5410 0 min 27.6 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 16.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.6 sec: PASS imx6q-wandboard 0 min 15.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 28.3 sec: PASS arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.2 sec: PASS armada-370-mirabox 0 min 23.5 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.8 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 1 min 29.3 sec: PASS (Warnings: 1)

11 years, 5 months

arm-soc boot: 64 boots: 62 pass, 2 fail (v3.16-rc1-28-g9cbf3d2)

by Kevin's boot bot

Full logs here: http://armcloud.us/kernel-ci/arm-soc/v3.16-rc1-28-g9cbf3d2 Tree/Branch: arm-soc Git describe: v3.16-rc1-28-g9cbf3d2 Failed boot tests ================= exynos5420-arndale-octa: FAIL: arm-exynos_defconfig http://armcloud.us/kernel-ci/arm-soc/v3.16-rc1-28-g9cbf3d2/arm-exynos_defco… ste-snowball: FAIL: arm-u8500_defconfig http://armcloud.us/kernel-ci/arm-soc/v3.16-rc1-28-g9cbf3d2/arm-u8500_defcon… Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 18.0 sec: PASS da850-evm 0 min 15.9 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 45.4 sec: PASS tegra30-beaver 0 min 18.2 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 18.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.5 sec: PASS omap5-uevm 1 min 42.7 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.8 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.1 sec: PASS armada-370-mirabox 0 min 21.1 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 42.5 sec: PASS am335x-boneblack 0 min 23.1 sec: PASS omap3-beagle-xm 0 min 50.3 sec: PASS legacy,3530beagle 0 min 23.8 sec: PASS (Warnings: 1) omap4-panda 0 min 53.3 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.8 sec: PASS am335x-bone 0 min 29.8 sec: PASS omap3-overo-storm-tobi 0 min 26.1 sec: PASS omap5-uevm 0 min 59.6 sec: PASS (Warnings: 1) omap3-n900 0 min 17.6 sec: PASS legacy,n900 0 min 16.7 sec: PASS (Warnings: 1) omap4-panda-es 0 min 58.5 sec: PASS (Warnings: 1) legacy,3730storm 0 min 21.0 sec: PASS legacy,3530overo 0 min 22.1 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS am335x-boneblack 0 min 22.7 sec: PASS sun7i-a20-cubieboard2 0 min 13.4 sec: PASS sun4i-a10-cubieboard 0 min 21.0 sec: PASS exynos5410-smdk5410 0 min 29.3 sec: PASS am335x-bone 0 min 24.3 sec: PASS tegra124-jetson-tk1 0 min 18.5 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 0 min 49.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.8 sec: PASS ste-snowball 1 min 16.0 sec: PASS tegra30-beaver 0 min 20.4 sec: PASS omap3-n900 0 min 16.9 sec: PASS qcom-apq8074-dragonboard 0 min 20.7 sec: PASS bcm28155-ap 0 min 28.2 sec: PASS omap3-overo-tobi 0 min 23.0 sec: PASS omap3-overo-storm-tobi 0 min 25.2 sec: PASS omap3-beagle-xm 0 min 51.2 sec: PASS exynos5420-arndale-octa 0 min 40.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS omap5-uevm 1 min 43.1 sec: PASS (Warnings: 1) omap4-panda-es 0 min 55.6 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.7 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 12.1 sec: PASS sun4i-a10-cubieboard 0 min 15.1 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 19.0 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.2 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.9 sec: FAIL exynos5250-arndale 0 min 36.3 sec: PASS exynos5410-smdk5410 0 min 27.9 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 16.4 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.5 sec: PASS imx6q-wandboard 0 min 14.8 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.0 sec: PASS armada-370-mirabox 0 min 23.8 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 57.9 sec: PASS (Warnings: 1)

11 years, 5 months

arm-soc boot: 36 passed 5 failed (arm-soc/v3.16-rc1-28-g9cbf3d2)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v3.16-rc1-28-g9cbf3d2/ Failed boards: capri bcm_defconfig : FAILED 1:25.68 omap5uevm omap2plus_defconfig : FAILED 1:46.77 omap5uevm multi_v7_defconfig : FAILED 1:51.95 omap5uevm multi_lpae_defconfig : FAILED 1:51.17 snowball u8500_defconfig : FAILED 1:51.14 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.50 arndale exynos_defconfig : passed 1:16.79 arndale multi_v7_defconfig : passed 1:39.38 arndale multi_lpae_defconfig : passed 1:19.67 bbb omap2plus_defconfig : passed 1:32.78 bbb multi_v7_defconfig : passed 1:24.25 beaver tegra_defconfig : passed 1:07.36 beaver multi_v7_defconfig : passed 1:04.00 capri multi_v7_defconfig : passed 0:41.10 cubie sunxi_defconfig : passed 1:24.52 cubie multi_v7_defconfig : passed 1:54.90 cubie2 sunxi_defconfig : passed 1:30.21 cubie2 multi_v7_defconfig : passed 1:58.57 cubie2 multi_lpae_defconfig : passed 1:24.41 cubox multi_v7_defconfig : passed 1:18.10 dalmore tegra_defconfig : passed 1:24.92 dalmore multi_v7_defconfig : passed 1:22.25 dalmore multi_lpae_defconfig : passed 1:23.22 hummingboard imx_v6_v7_defconfig : passed 1:15.28 hummingboard multi_v7_defconfig : passed 1:25.74 jetson tegra_defconfig : passed 1:07.15 jetson multi_v7_defconfig : passed 1:03.07 jetson multi_lpae_defconfig : passed 1:00.18 panda omap2plus_defconfig : warnings 1:36.53 panda multi_v7_defconfig : warnings 1:55.17 sama5 sama5_defconfig : warnings 1:55.60 seaboard tegra_defconfig : passed 1:12.27 seaboard multi_v7_defconfig : passed 1:04.11 snow exynos_defconfig : passed 0:56.46 snow multi_v7_defconfig : passed 1:00.46 snow multi_lpae_defconfig : passed 1:03.77 snowball multi_v7_defconfig : passed 3:14.18 trimslice tegra_defconfig : passed 1:03.21 trimslice multi_v7_defconfig : passed 1:39.60 wandboard imx_v6_v7_defconfig : passed 1:12.99 wandboard multi_v7_defconfig : passed 1:17.41 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1800 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.092931] NET: Registered protocol family 17 [ 47.092960] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.102069] mmcblk0: unknown partition table [ 47.102853] mmcblk0boot1: unknown partition table [ 47.103620] mmcblk0boot0: unknown partition table [ 47.118325] can: controller area network core (rev 20120528 abi 9) [ 47.124817] NET: Registered protocol family 29 [ 47.129469] can: raw protocol (rev 20120528) [ 47.133937] can: broadcast manager protocol (rev 20120528 t) [ 47.139856] can: netlink gateway (rev 20130117) max_hops=1 [ 47.145856] Key type dns_resolver registered [ 47.150391] omap_vc_init_channel: No PMIC info for vdd_core [ 47.156219] omap_vp_init: No PMIC info for vdd_core [ 47.161321] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.166955] omap_vp_init: No PMIC info for vdd_mm [ 47.171869] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.177598] omap_vp_init: No PMIC info for vdd_mpu [ 47.182885] ThumbEE CPU extension supported. [ 47.187364] Registering SWP/SWPB emulation handler [ 47.193576] palmas 0-0048: Irq flag is 0x00000000 [ 47.201314] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.208881] smps123: 600 <--> 1500 mV at 1060 mV [ 47.215013] smps45: 600 <--> 1310 mV at 1030 mV [ 47.221461] smps6: 1200 mV [ 47.225459] smps7: 1800 mV [ 47.229600] smps8: 600 <--> 1310 mV at 1040 mV [ 47.235340] smps9: failed to get the current voltage [ 47.240586] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.252641] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.381710] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.526720] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.532790] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.540242] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.547105] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.554818] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.568276] ALSA device list: [ 47.571370] No soundcards found. [ 47.575380] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.538023] NET: Registered protocol family 17 [ 47.538050] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.547175] mmcblk0: unknown partition table [ 47.547945] mmcblk0boot1: unknown partition table [ 47.548708] mmcblk0boot0: unknown partition table [ 47.563412] can: controller area network core (rev 20120528 abi 9) [ 47.569910] NET: Registered protocol family 29 [ 47.574550] can: raw protocol (rev 20120528) [ 47.579007] can: broadcast manager protocol (rev 20120528 t) [ 47.584922] can: netlink gateway (rev 20130117) max_hops=1 [ 47.590929] Key type dns_resolver registered [ 47.595458] omap_vc_init_channel: No PMIC info for vdd_core [ 47.601282] omap_vp_init: No PMIC info for vdd_core [ 47.606373] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.612012] omap_vp_init: No PMIC info for vdd_mm [ 47.616927] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.622655] omap_vp_init: No PMIC info for vdd_mpu [ 47.627932] ThumbEE CPU extension supported. [ 47.632409] Registering SWP/SWPB emulation handler [ 47.638614] palmas 0-0048: Irq flag is 0x00000000 [ 47.646285] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.653854] smps123: 600 <--> 1500 mV at 1060 mV [ 47.659987] smps45: 600 <--> 1310 mV at 1030 mV [ 47.666406] smps6: 1200 mV [ 47.670404] smps7: 1800 mV [ 47.674535] smps8: 600 <--> 1310 mV at 1040 mV [ 47.680279] smps9: failed to get the current voltage [ 47.685525] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.697584] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.821810] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.966822] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.972897] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.980334] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.987189] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.994906] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.008311] ALSA device list: [ 48.011411] No soundcards found. [ 48.015401] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.951628] Key type dns_resolver registered [ 1.951747] omap_vc_init_channel: No PMIC info for vdd_core [ 1.951751] omap_vp_init: No PMIC info for vdd_core [ 1.951761] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.951764] omap_vp_init: No PMIC info for vdd_mm [ 1.951773] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.951777] omap_vp_init: No PMIC info for vdd_mpu [ 1.952347] ThumbEE CPU extension supported. [ 1.952372] Registering SWP/SWPB emulation handler [ 1.952386] SmartReflex Class3 initialized [ 2.016397] palmas 0-0048: Irq flag is 0x00000000 [ 2.034184] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.034484] mmc0: new high speed MMC card at address 0001 [ 2.040174] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.040433] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.040637] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.043490] mmcblk0: unknown partition table [ 2.045484] mmcblk0boot1: unknown partition table [ 2.047340] mmcblk0boot0: unknown partition table [ 2.123737] smps123: 600 <--> 1500 mV at 1060 mV [ 2.130919] smps45: 600 <--> 1310 mV at 1030 mV [ 2.138263] smps6: 1200 mV [ 2.143054] smps7: 1800 mV [ 2.147946] smps8: 600 <--> 1310 mV at 1040 mV [ 2.154478] smps9: failed to get the current voltage [ 2.160474] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.174859] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.183711] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191595] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.197708] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.206826] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.216212] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.223194] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.231810] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.240484] sr_init: No PMIC hook to init smartreflex [ 2.245951] sr_init: platform driver register failed for SR [ 2.274206] pbias_mmc_omap5: disabling [ 2.279734] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627197] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635131] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647064] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654357] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665863] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674377] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686309] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693603] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705108] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712921] HS USB OTG: no transceiver configured [ 3.717620] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725463] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733398] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745330] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752655] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764129] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772613] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784545] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791870] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803344] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811157] HS USB OTG: no transceiver configured [ 3.815856] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823730] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831634] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843566] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850891] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862365] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870880] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882812] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890106] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901580] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909393] HS USB OTG: no transceiver configured [ 3.914123] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.921966] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.929870] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941802] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949096] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960571] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

11 years, 5 months

arm-soc build: 268 warnings 0 failures (arm-soc/v3.16-rc1-28-g9cbf3d2)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 9cbf3d2 Merge tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.16-rc1-28-g9cbf3d2/ Runtime: 46m 29s Passed: 126 Failed: 0 Warnings: 268 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 2 buildall.arm.omap1_defconfig.log.passed:warning: (ARCH_OMAP1) selects ARCH_OMAP which has unmet direct dependencies (ARCH_MULTI_V6 || ARCH_MULTI_V7) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 kernel/sched/core.c:2575:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2547:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2549:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches:

11 years, 5 months

mainline boot: 64 boots: 63 pass, 1 fail (v3.16-rc2)

by Kevin's boot bot

Full logs here: http://armcloud.us/kernel-ci/mainline/v3.16-rc2 Tree/Branch: mainline Git describe: v3.16-rc2 Failed boot tests ================= ste-snowball: FAIL: arm-u8500_defconfig http://armcloud.us/kernel-ci/mainline/v3.16-rc2/arm-u8500_defconfig/boot-st… Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 18.4 sec: PASS da850-evm 0 min 16.3 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 18.5 sec: PASS tegra30-beaver 0 min 18.3 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 18.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.6 sec: PASS omap5-uevm 1 min 43.6 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.6 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.1 sec: PASS armada-370-mirabox 0 min 21.0 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 40.0 sec: PASS am335x-boneblack 0 min 22.8 sec: PASS omap3-beagle-xm 0 min 53.0 sec: PASS legacy,3530beagle 0 min 23.9 sec: PASS (Warnings: 1) omap4-panda 0 min 56.5 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.6 sec: PASS am335x-bone 0 min 24.7 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 0 min 56.3 sec: PASS (Warnings: 1) omap3-n900 0 min 17.3 sec: PASS legacy,n900 0 min 17.8 sec: PASS (Warnings: 1) omap4-panda-es 0 min 50.9 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.9 sec: PASS legacy,3530overo 0 min 22.6 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.9 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS sun7i-a20-cubieboard2 0 min 13.5 sec: PASS sun4i-a10-cubieboard 0 min 18.2 sec: PASS exynos5410-smdk5410 0 min 29.5 sec: PASS am335x-bone 0 min 24.3 sec: PASS tegra124-jetson-tk1 0 min 18.6 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 0 min 52.5 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.5 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS ste-snowball 1 min 19.5 sec: PASS tegra30-beaver 0 min 20.9 sec: PASS omap3-n900 0 min 17.0 sec: PASS qcom-apq8074-dragonboard 0 min 20.4 sec: PASS bcm28155-ap 0 min 27.0 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 53.1 sec: PASS exynos5420-arndale-octa 0 min 40.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS omap5-uevm 1 min 42.7 sec: PASS (Warnings: 1) omap4-panda-es 0 min 56.0 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 32.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 12.1 sec: PASS sun4i-a10-cubieboard 0 min 11.9 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.8 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.3 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.1 sec: PASS exynos5250-arndale 0 min 31.8 sec: PASS exynos5410-smdk5410 0 min 27.6 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 16.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.4 sec: PASS imx6q-wandboard 0 min 14.6 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.4 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.8 sec: PASS armada-370-mirabox 0 min 22.7 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 16.1 sec: PASS (Warnings: 1)

11 years, 5 months

mainline boot: 36 passed 4 failed (mainline/v3.16-rc2)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v3.16-rc2/ Failed boards: capri bcm_defconfig : FAILED 1:24.77 snow multi_v7_defconfig : FAILED 1:16.85 snow multi_lpae_defconfig : FAILED 1:13.51 snowball u8500_defconfig : FAILED 1:51.65 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.71 arndale exynos_defconfig : passed 1:16.71 arndale multi_v7_defconfig : passed 1:33.71 arndale multi_lpae_defconfig : passed 1:22.07 bbb omap2plus_defconfig : passed 1:32.73 bbb multi_v7_defconfig : passed 1:25.12 beaver tegra_defconfig : passed 1:09.15 beaver multi_v7_defconfig : passed 1:13.71 capri multi_v7_defconfig : passed 0:45.12 cubie sunxi_defconfig : passed 1:11.31 cubie multi_v7_defconfig : passed 1:31.13 cubie2 sunxi_defconfig : passed 1:11.28 cubie2 multi_v7_defconfig : passed 1:35.11 cubie2 multi_lpae_defconfig : passed 1:08.43 cubox multi_v7_defconfig : passed 1:11.48 dalmore tegra_defconfig : passed 1:23.76 dalmore multi_v7_defconfig : passed 1:21.33 dalmore multi_lpae_defconfig : passed 1:21.64 hummingboard imx_v6_v7_defconfig : passed 1:21.71 hummingboard multi_v7_defconfig : passed 1:16.72 jetson tegra_defconfig : passed 1:00.98 jetson multi_lpae_defconfig : passed 1:04.13 omap5uevm omap2plus_defconfig : warnings 1:04.04 omap5uevm multi_v7_defconfig : warnings 2:10.45 omap5uevm multi_lpae_defconfig : warnings 1:53.99 panda omap2plus_defconfig : warnings 1:28.93 panda multi_v7_defconfig : warnings 1:44.49 sama5 sama5_defconfig : warnings 1:57.39 seaboard tegra_defconfig : passed 1:07.39 seaboard multi_v7_defconfig : passed 1:08.24 snow exynos_defconfig : passed 1:30.31 snowball multi_v7_defconfig : passed 3:17.34 trimslice tegra_defconfig : passed 1:02.55 trimslice multi_v7_defconfig : passed 1:04.92 wandboard imx_v6_v7_defconfig : passed 1:10.55 wandboard multi_v7_defconfig : passed 1:19.05 Offline boards: jetson multi_v7_defconfig : OFFLINE 1:38.64 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1800 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2889.831530] pinctrl core: initialized pinctrl subsystem [ 2889.831732] regulator-dummy: no parameters [ 2889.837639] NET: Registered protocol family 16 [ 2889.838516] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.839226] cpuidle: using governor ladder [ 2889.839235] cpuidle: using governor menu [ 2889.844314] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.848110] No ATAGs? [ 2889.848127] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.848132] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.848226] EXYNOS5250 PMU Initialize [ 2889.849450] Serial: AMBA PL011 UART driver [ 2920.594284] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594296] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594584] vbat-supply: no parameters [ 2920.594726] P5.0V_USB3CON: 5000 mV [ 2920.595846] vgaarb: loaded [ 2920.596139] SCSI subsystem initialized [ 2920.596219] libata version 3.00 loaded. [ 2920.596365] usbcore: registered new interface driver usbfs [ 2920.596394] usbcore: registered new interface driver hub [ 2920.596445] usbcore: registered new device driver usb [ 2920.596857] Linux video capture interface: v2.00 [ 2920.596880] pps_core: LinuxPPS API ver. 1 registered [ 2920.596885] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596898] PTP clock support registered [ 2920.596937] EDAC MC: Ver: 3.0.0 [ 2920.597288] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597737] Switched to clocksource arch_sys_counter [ 2920.601946] NET: Registered protocol family 2 [ 2920.602185] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602222] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602295] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602323] TCP: reno registered [ 2920.602329] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602347] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602425] NET: Registered protocol family 1 [ 2920.602559] RPC: Registered named UNIX socket transport module. [ 2920.602564] RPC~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.904152] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.904157] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.904252] EXYNOS5250 PMU Initialize [ 2889.905481] Serial: AMBA PL011 UART driver [ 2920.594301] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594313] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594607] vbat-supply: no parameters [ 2920.594749] P5.0V_USB3CON: 5000 mV [ 2920.595884] vgaarb: loaded [ 2920.596169] SCSI subsystem initialized [ 2920.596250] libata version 3.00 loaded. [ 2920.596398] usbcore: registered new interface driver usbfs [ 2920.596428] usbcore: registered new interface driver hub [ 2920.596479] usbcore: registered new device driver usb [ 2920.596895] Linux video capture interface: v2.00 [ 2920.596917] pps_core: LinuxPPS API ver. 1 registered [ 2920.596921] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596935] PTP clock support registered [ 2920.596973] EDAC MC: Ver: 3.0.0 [ 2920.597319] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597770] Switched to clocksource arch_sys_counter [ 2920.602095] NET: Registered protocol family 2 [ 2920.602333] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602370] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602443] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602471] TCP: reno registered [ 2920.602478] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602495] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602575] NET: Registered protocol family 1 [ 2920.602718] RPC: Registered named UNIX socket transport module. [ 2920.602724] RPC: Registered udp transport module. [ 2920.602730] RPC: Registered tcp transport module. [ 2920.602734] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2920.602743] PCI: CLS 0 bytes, default 64 [ 2920.603085] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 2920.603769] futex hash table entries: 512 (order: 3, 32768 bytes) [ 2920.609063] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2920.609410] NFS: Registering the id_resolver key type [ ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.538574] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550506] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.557800] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569305] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.577880] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.589782] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597106] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608581] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616394] HS USB OTG: no transceiver configured [ 3.621124] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.628967] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.636871] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.648803] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656127] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667602] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676177] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688079] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695404] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.706878] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714721] HS USB OTG: no transceiver configured [ 3.719421] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727264] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735198] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747100] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754425] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.765899] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774475] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786407] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.793731] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805206] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813018] HS USB OTG: no transceiver configured [ 3.817749] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825592] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833526] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845428] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852752] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864227] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.872802] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports