Kernel-build-reports January 2014

kernel-build-reports@lists.linaro.org

13 participants
419 discussions

arm-soc boot: 28 passed 1 failed (arm-soc/v3.13-rc5-1194-g9c6e61d)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:35.21 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:10.85 arndale exynos_defconfig : passed 1:15.36 bbb omap2plus_defconfig : passed 1:36.52 bbb multi_v7_defconfig : passed 1:24.62 beaver tegra_defconfig : passed 0:55.40 beaver multi_v7_defconfig : passed 0:50.69 capri bcm_defconfig : passed 0:42.47 capri multi_v7_defconfig : passed 0:44.73 cubie sunxi_defconfig : passed 0:54.18 cubie multi_v7_defconfig : passed 0:55.22 cubie2 sunxi_defconfig : passed 0:53.32 cubie2 multi_v7_defconfig : passed 1:02.17 cubie2 multi_lpae_defconfig : passed 0:49.56 cubox dove_defconfig : warnings 1:06.47 dalmore tegra_defconfig : passed 1:22.75 dalmore multi_v7_defconfig : passed 1:17.44 dalmore multi_lpae_defconfig : passed 1:15.70 panda omap2plus_defconfig : passed 1:22.05 sama5 sama5_defconfig : passed 3:10.89 seaboard tegra_defconfig : passed 0:59.68 seaboard multi_v7_defconfig : passed 1:10.79 snow exynos_defconfig : passed 1:18.32 snowball u8500_defconfig : passed 2:30.12 snowball multi_v7_defconfig : passed 2:29.87 trimslice tegra_defconfig : passed 1:01.40 trimslice multi_v7_defconfig : passed 0:58.94 wandboard imx_v6_v7_defconfig : passed 1:06.55 wandboard multi_v7_defconfig : passed 0:59.96 Board legend is available at http://arm-soc.lixom.net/boards.html Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.435546] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.442901] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.450500] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 1.458099] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 1.465728] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.471588] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 1.478942] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 1.486267] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.493957] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.500762] usbcore: registered new interface driver usbhid [ 1.506622] usbhid: USB HID core driver [ 1.513671] TCP: cubic registered [ 1.517181] NET: Registered protocol family 17 [ 1.522003] Key type dns_resolver registered [ 1.526916] Power Management for TI OMAP4+ devices. [ 1.532043] Power Management for TI OMAP4. [ 1.536376] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.543701] Registering SWP/SWPB emulation handler [ 1.549377] vwl1271: 1800 mV [ 1.554321] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.563476] twl 0-0048: PIH (irq 39) nested IRQs [ 1.569091] twl_rtc rtc.11: Power up reset detected. [ 1.574951] twl_rtc rtc.11: Enabling TWL-RTC [ 1.581848] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.588623] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.594635] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.600646] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.606689] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.612091] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.617431] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.622436] VDAC: 1800 mV [ 1.622436] VANA: 2100 mV [ 1.629455] VCXIO: 1800 mV [ 1.629486] VUSB: 3300 mV [ 1.636199] V1V8: 1800 mV [ 1.639709] V2V1: 2100 mV [ 1.645263] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.726409] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: timeout

11 years, 2 months

arm-soc build: 55 warnings 0 failures (arm-soc/v3.13-rc5-1194-g9c6e61d)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 9c6e61d Merge branches 'next/drivers' and 'next/dt' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc5-1194-g9c6e61d/ Runtime: 17m 35s Passed: 123 Failed: 0 Warnings: 55 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:201:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:209:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:299:28: warning: unused variable 'ops' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:346:28: warning: unused variable 'ops' [-Wunused-variable] Section mismatches:

11 years, 2 months

mainline boot: 29 passed 0 failed (mainline/v3.13-3260-g03d11a0)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:10.83 arndale exynos_defconfig : passed 1:09.19 bbb omap2plus_defconfig : passed 1:31.57 bbb multi_v7_defconfig : passed 1:20.32 beaver tegra_defconfig : passed 0:53.05 beaver multi_v7_defconfig : passed 0:41.04 capri bcm_defconfig : passed 0:42.12 capri multi_v7_defconfig : passed 0:42.74 cubie sunxi_defconfig : passed 0:50.78 cubie multi_v7_defconfig : passed 0:56.82 cubie2 sunxi_defconfig : passed 0:49.99 cubie2 multi_v7_defconfig : passed 0:57.77 cubie2 multi_lpae_defconfig : passed 0:50.73 cubox dove_defconfig : passed 1:09.46 dalmore tegra_defconfig : passed 1:16.92 dalmore multi_v7_defconfig : passed 1:02.85 dalmore multi_lpae_defconfig : passed 1:02.36 panda omap2plus_defconfig : passed 1:15.54 panda multi_v7_defconfig : passed 1:06.97 sama5 sama5_defconfig : passed 1:53.80 seaboard tegra_defconfig : passed 1:00.50 seaboard multi_v7_defconfig : passed 0:54.93 snow exynos_defconfig : passed 1:18.80 snowball u8500_defconfig : passed 1:27.61 snowball multi_v7_defconfig : passed 1:05.65 trimslice tegra_defconfig : passed 0:55.18 trimslice multi_v7_defconfig : passed 0:51.96 wandboard imx_v6_v7_defconfig : passed 0:54.79 wandboard multi_v7_defconfig : passed 0:52.69 Board legend is available at http://arm-soc.lixom.net/boards.html

11 years, 2 months

mainline build: 11 warnings 0 failures (mainline/v3.13-3260-g03d11a0)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 03d11a0 Merge tag 'for-v3.14' of git://git.infradead.org/battery-2.6 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-3260-g03d11a0/ Runtime: 15m 3s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2140:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

11 years, 2 months

mainline boot: 29 passed 0 failed (mainline/v3.13-3244-gac26663)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.20 arndale exynos_defconfig : passed 1:05.80 bbb omap2plus_defconfig : passed 1:35.85 bbb multi_v7_defconfig : passed 1:19.73 beaver tegra_defconfig : passed 0:51.24 beaver multi_v7_defconfig : passed 0:40.96 capri bcm_defconfig : passed 0:42.65 capri multi_v7_defconfig : passed 0:42.82 cubie sunxi_defconfig : passed 0:53.79 cubie multi_v7_defconfig : passed 0:56.74 cubie2 sunxi_defconfig : passed 0:50.45 cubie2 multi_v7_defconfig : passed 0:57.01 cubie2 multi_lpae_defconfig : passed 0:50.41 cubox dove_defconfig : passed 1:04.63 dalmore tegra_defconfig : passed 1:21.15 dalmore multi_v7_defconfig : passed 1:04.50 dalmore multi_lpae_defconfig : passed 1:04.69 panda omap2plus_defconfig : passed 1:14.95 panda multi_v7_defconfig : passed 1:08.72 sama5 sama5_defconfig : passed 1:51.10 seaboard tegra_defconfig : passed 1:01.48 seaboard multi_v7_defconfig : passed 0:54.07 snow exynos_defconfig : passed 1:18.73 snowball u8500_defconfig : passed 1:25.13 snowball multi_v7_defconfig : passed 1:04.46 trimslice tegra_defconfig : passed 1:01.61 trimslice multi_v7_defconfig : passed 0:46.84 wandboard imx_v6_v7_defconfig : passed 0:57.25 wandboard multi_v7_defconfig : passed 0:55.25 Board legend is available at http://arm-soc.lixom.net/boards.html

11 years, 2 months

mainline build: 11 warnings 0 failures (mainline/v3.13-3244-gac26663)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: ac26663 Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-3244-gac26663/ Runtime: 28m 19s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2140:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

11 years, 2 months

mainline boot: 29 passed 0 failed (mainline/v3.13-2721-ga547df9)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.91 arndale exynos_defconfig : passed 1:07.74 bbb omap2plus_defconfig : passed 1:34.88 bbb multi_v7_defconfig : passed 1:20.41 beaver tegra_defconfig : passed 0:54.40 beaver multi_v7_defconfig : passed 0:43.15 capri bcm_defconfig : passed 0:43.38 capri multi_v7_defconfig : passed 0:41.04 cubie sunxi_defconfig : passed 0:55.46 cubie multi_v7_defconfig : passed 0:55.25 cubie2 sunxi_defconfig : passed 0:52.52 cubie2 multi_v7_defconfig : passed 1:09.45 cubie2 multi_lpae_defconfig : passed 0:50.60 cubox dove_defconfig : passed 1:01.69 dalmore tegra_defconfig : passed 1:22.17 dalmore multi_v7_defconfig : passed 1:02.95 dalmore multi_lpae_defconfig : passed 1:02.38 panda omap2plus_defconfig : passed 1:15.77 panda multi_v7_defconfig : passed 1:06.64 sama5 sama5_defconfig : passed 1:55.43 seaboard tegra_defconfig : passed 0:59.91 seaboard multi_v7_defconfig : passed 0:53.83 snow exynos_defconfig : passed 1:18.67 snowball u8500_defconfig : passed 1:23.50 snowball multi_v7_defconfig : passed 1:05.39 trimslice tegra_defconfig : passed 0:59.65 trimslice multi_v7_defconfig : passed 0:47.69 wandboard imx_v6_v7_defconfig : passed 0:56.63 wandboard multi_v7_defconfig : passed 0:56.57 Board legend is available at http://arm-soc.lixom.net/boards.html

11 years, 2 months

mainline build: 11 warnings 0 failures (mainline/v3.13-2721-ga547df9)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: a547df9 Merge tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-2721-ga547df9/ Runtime: 16m 49s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2140:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

11 years, 2 months

queue boot: 8 passed 2 failed (queue/v3.10.27-3-gd69b10a)

by Olof's autobooter

Failed boards: cubie multi_v7_defconfig : FAILED 0:23.81 seaboard tegra_defconfig : FAILED 1:12.16 Successful boards: arndale exynos_defconfig : passed 1:00.83 beaver tegra_defconfig : passed 0:43.77 cubox dove_defconfig : passed 0:53.04 dalmore tegra_defconfig : passed 1:07.70 panda omap2plus_defconfig : passed 1:11.44 sama5 sama5_defconfig : passed 1:56.31 snow exynos_defconfig : passed 1:22.30 trimslice tegra_defconfig : passed 0:53.03 Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.27-00003-gd69b10a #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275d20>] (panic+0xa0/0x1e8) [<c0275d20>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271a90>] (kernel_init+0x8/0x158) [<c0271a90>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic Board seaboard-tegra_defconfig failure log: ------------------------------------------------- [ 8.068708] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.075775] asix 3-1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.100 -- renewal in 1534 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. Debian GNU/Linux 7.0 seaboard ttyS0 seaboard login: root root Password: root Last login: Tue Jan 21 07:13:12 UTC 2014 on ttyS0 Linux seaboard 3.10.27-00003-gd69b10a #1 SMP PREEMPT Tue Jan 21 01:01:04 PST 2014 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@seaboard:~# cat /proc/cmdline cat /proc/cmdline root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk root@seaboard:~# uname -r uname ~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: uname -r.

11 years, 2 months

queue build: 23 warnings 0 failures (queue/v3.10.27-3-gd69b10a)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: d69b10a perf/x86/amd/ibs: Fix waking up from S3 for AMD family 10h Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.10.27-3-gd69b10a/ Runtime: 32m 18s Passed: 121 Failed: 0 Warnings: 23 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/gpio/gpio-omap.c:1529:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:124:41: warning: statement with no effect [-Wunused-value] 1 include/linux/clocksource.h:345:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] Section mismatches:

11 years, 2 months

← Newer
1
...
16
17
18
19
20
21
22
...
42
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports January 2014