debug EMMC boot: print init OK debug EMMC boot: send RST_N . debug EMMC boot: start eMMC boot...... load fastboot1! #PMU LDO15_REG_ADJ:0x00000054, STATUS3_LDO9_16:0x00000048 #PMU LDO22_REG:ADJ:0x00000057, STATUS4_LDO17_22:0x00000026 [BDID]boardid: 556 <5.5.6> #select_hw_config, 58, board_id:0x0000002b #select_hw_config, 71, array index:0 baudRate=115200, g_baudRate=115200 get_hw_config_int,hw_afreq:1200000. get_efuse_value,efuse ATE_flag temp:0x02800000. ATE PASS,ate flag value:0x00000001. get_efuse_value,efuse acpu_freq change level:0x9638e400. get_efuse_value,efuse afreq change level val:0x00000000. get_efuse_value,efuse acpu_freq level:0x9638e400. get_efuse_value,efuse acpu freq sys level:0x00000000. ###INFO###,soc_freq = hw_afreq, efuse_afreq:1200000,hw_afreq:1200000. efuse ACPU 1.4G HPM:0. efuse ACPU 1.2G HPM:0. efuse ACPU 960M HPM:0. fastboot: acpu_dvfs_init successful! acpu_get_dvfs_volt,g_afreq_max_pro is :5��acpu max freq:1200000. acpu support freq num:5 volt:0x0000003a 0x0000003a 0x0000004a 0x0000005b 0x0000006b acpu start prof:0x00000004 acpu magic:0x5a5ac5c5 #### success !!!!! set_acpu_freq: acpu support freq num is 5 and start is 4 . get_ddr_type 1; (lpddr2: 0; lpddr3: 1) ddr_init(): get_ddr_type: 1 ddr freq: 800000 in lpddr3_init: mode: 0; freq_config: 800 lpddr3_150_rank0_init_pass lpddr3_150_rank1_init_pass lpddr3_266_rank0_init_pass lpddr3_266_rank1_init_pass lpddr3_400_rank0_init_pass lpddr3_400_rank1_init_pass lpddr3_rank0_phydraminit_pass lpddr3_cat_pass lpddr3_533_rank0_init_pass rdet_lbs_passrdet_ds_passrdet_rbs_av_passwdet_lbs_passwdet_ds_passwdet_rbs_av_passlpddr3_533_rank1_init_pass lpddr3_rank0_phydraminit_pass lpddr3_cat_pass lpddr3_800_rank0_init_pass rdet_lbs_passrdet_ds_passrdet_rbs_av_passwdet_lbs_passwdet_ds_passwdet_rbs_av_passlpddr3_800_rank1_init_pass tmp_freq: 400000 MR8 value=:0x0000001b MR5 value=:0x00000003 Elpida DDR MR6 value=:0x00000002 MR5 value=:0x00000000 [MR7,MR6,MR5]=:0x00000203 ddr init pll1 0x00007800!ddrc_qos_init done [emmc_set_card_ready]emmc id:0x570c6177 0x47425af6 0x4d433034 0xfe014e4d [emmc_set_card_ready]manufid: 0x000000fe DDR mode emmc --error: gps/ldo16 load fastboot2 succ and run it now! [1970:1:1 0:0:7][31679]GET DDR capacity. g_ddr_last_addr=0x3fffffff !! [1970:1:1 0:0:7][34022] [emmc_set_card_ready]emmc id:0x570c6177 0x47425af6 0x4d433034 0xfe014e4d [1970:1:1 0:0:7][34302] [emmc_set_card_ready]manufid: 0x000000fe [1970:1:1 0:0:7][34560]DDR mode emmc [1970:1:1 0:0:7][36780][init_nve]NV init ok! [1970:1:1 0:0:7][36879][BDID]boardid: 43. [1970:1:1 0:0:7][37004][BDID]CHIP_ID:0x48696220. [1970:1:1 0:0:7][37149][BDID]pmu_id:0x00000011. [1970:1:1 0:0:7][37291]#select_hw_config, 58, board_id:0x0000002b [1970:1:1 0:0:7][37484]#select_hw_config, 71, array index:0 [1970:1:1 0:0:7][37663]can't find ptn boot [1970:1:1 0:0:7][37789] !!!!!!secure_verify_dt FAIL!!!!!! [1970:1:1 0:0:7][37992]boot!! BOOT_MAGIC ERROR [1970:1:1 0:0:7][38106]can't find ptn recovery [1970:1:1 0:0:7][38244] !!!!!!dtb_init FAIL!!!!!! [1970:1:1 0:0:7][38399]baudRate=115200, g_baudRate=115200 [1970:1:1 0:0:7][38569]USB FastBoot: V2.0 [1970:1:1 0:0:7][38697]Machine ID: 2967 v0 [1970:1:1 0:0:7][38833]ydb Build Date: May 14 2015, 23:55:05 [1970:1:1 0:0:7][39030]Serial Number: serialv1.0 [1970:1:1 0:0:7][39183]END ADDRESS=07038950 [1970:1:1 0:0:7][39314]#ddr [0xf7032580]:0x00000202 [1970:1:1 0:0:7][39468]#ddr [0xf7032594]:0x00001003 [1970:1:1 0:0:7][39622]#ddr [0xf7128040]:0x00002001 [1970:1:1 0:0:7][39777]--error: cdma_gsm/boardid_virtual [1970:1:1 0:0:7][39942][virtual config do not exist] [1970:1:1 0:0:7][40326]--error: cdma_gsm/cg_mode [1970:1:1 0:0:7][40426][mode config do not exist] [1970:1:1 0:0:7][40575]--error: CCPU_GPIO_INT_GROUP/group_num [1970:1:1 0:0:7][40758][BDID]boardid: 43. [1970:1:1 0:0:7][40884] [1970:1:1 0:0:7][40957]get_reserve_mem_info:can not open g_fdt [1970:1:1 0:0:7][41145]First Cold Start [1970:1:1 0:0:7][41264]First Cold Start [1970:1:1 0:0:7][41384]Set Warm Start Flag End [1970:1:1 0:0:7][41523][fastboot]: dump_mode check_wdt_reset: 0 [1970:1:1 0:0:7][41711][fastboot]: no key pressed [1970:1:1 0:0:7][41862]can't find ptn misc [1970:1:1 0:0:7][41989]can't find ptn misc [1970:1:1 0:0:7][42115][fastboot]: reboot type 0x00000000 [1970:1:1 0:0:7][42286][fastboot]: get_poweroff_alarm 0x00000000. [1970:1:1 0:0:7][45730]get oeminfo 97, len 16 [1970:1:1 0:0:7][45824]can't find oeminfo. [1970:1:1 0:0:7][45951]cannot get oeminfo lock state info [1970:1:1 0:0:7][46121]get oeminfo 35, len 12 [1970:1:1 0:0:7][46260]can't find oeminfo. [1970:1:1 0:0:7][46386]cannot get oeminfo root type info [1970:1:1 0:0:7][46554]backdoor.lock_state.fb_lock_stat = 1 [1970:1:1 0:0:7][46730]backdoor.lock_state.user_lock_stat = 0 [1970:1:1 0:0:7][46912]backdoor.lock_state.check_root_stat = 0 [1970:1:1 0:0:7][47097]backdoor.lock_state.check_sign_stat = 0 [1970:1:1 0:0:7][47283]widevine state already is locked [1970:1:1 0:0:7][47448]pwc_switch_nv_read: force enabling cpu frequency change for ACPU [1970:1:1 0:0:7][47704]pwc_switch_nv_read: Reg[f7030d04]=0x02000020 [1970:1:1 0:0:7][47908] case NORMAL_MODE: [1970:1:1 0:0:7][48242]can't find ptn misc [1970:1:1 0:0:7][48326] execute_load_kernel: can't read power_state from misc [1970:1:1 0:0:7][48563]SD Card isn't present. [1970:1:1 0:0:7][48713]Partition 1: Filesystem: FAT16 "BOOT IMG " [1970:1:1 0:0:7][63202]rest_init: read kernel bytes 00bc4278 [1970:1:1 0:0:8][67467]rest_init: read ramdisk bytes 003520ac [1970:1:1 0:0:8][67894]rest_init: read dtb bytes 000150aa [1970:1:1 0:0:8][68153]rest_init: read cmdline console=tty0 console=ttyAMA0,115200n8 root=/dev/disk/by-partlabel/system rootwait rw [1970:1:1 0:0:8][68503]cmd_line_mem_size = 0x40000000 [1970:1:1 0:0:8][68661]creat_kernelsize_cmdline : cmd_line_mem_size = 0x0000038cMB [1970:1:1 0:0:8][68908]get_efuse_thermal_value : 0x9638e400. [1970:1:1 0:0:8][69139]--error: lcd/devices [1970:1:1 0:0:8][69230]--error: lcd/devices [1970:1:1 0:0:8][69392]cmdline of bitmap abnormal reset is bitmapofabnrst=0x00000008 [1970:1:1 0:0:8][69615]cmdline:pmu_nv_info_addr=0x00000000[1970:1:1 0:0:8][69770]cmdline of boot_slice is boot_slice=0x00011088 [1970:1:1 0:0:8][69995]uart0 nve config is enabled, uart console will be set by UART0 nv_data[1] ! [1970:1:1 0:0:8][70262]create_console_cmdline UART0 nv_data[1] is 49, uart console will be Enabled. [1970:1:1 0:0:8][70560]console cmdline:console=ttyAMA0,115200 [1970:1:1 0:0:8][70749]get_cmdlind_from_nve nv is INVALID [1970:1:1 0:0:8][70911]creat_flash_nv_cmdline error [1970:1:1 0:0:8][71070]cmdline size = 520 [1970:1:1 0:0:8][75461]Could not find hisi_ion_no_iommu@0 node. [1970:1:1 0:0:8][75606]Could not find memreserve_base node : 0x00000000. [1970:1:1 0:0:8][75824]hifi nv old status:0x05a0005c is 0xaaaaaaaa [1970:1:1 0:0:8][76015] 64 start hifi ok [ 0.003924] /cpus/cpu@0: Missing clock-frequency property [ 0.003974] /cpus/cpu@1: Missing clock-frequency property [ 0.004020] /cpus/cpu@2: Missing clock-frequency property [ 0.004067] /cpus/cpu@3: Missing clock-frequency property [ 0.004114] /cpus/cpu@4: Missing clock-frequency property [ 0.004162] /cpus/cpu@5: Missing clock-frequency property [ 0.004211] /cpus/cpu@6: Missing clock-frequency property [ 0.004261] /cpus/cpu@7: Missing clock-frequency property [ 2.413050] kvm [1]: HYP mode not available [ 2.443711] of_dma_request_slave_channel: dma-names property of node '/smb/uart@f8015000' missing or empty [ 2.455633] [drm:hisi_dsi_probe] *ERROR* failed to find slave encoder i2c client [ 3.699471] Unable to handle kernel NULL pointer dereference at virtual address 000000a0 [ 3.707607] pgd = ffffffc000d10000 [ 3.711012] [000000a0] *pgd=000000003d808003, *pud=000000003d808003, *pmd=000000003d809003, *pte=00600000f6801707 [ 3.721337] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 3.726915] Modules linked in: [ 3.729982] CPU: 2 PID: 6 Comm: kworker/u16:0 Not tainted 3.18.0 #1 [ 3.736260] Workqueue: deferwq deferred_probe_work_func [ 3.741496] task: ffffffc0364aa0c0 ti: ffffffc0364d4000 task.ti: ffffffc0364d4000 [ 3.748988] PC is at hisi_dsi_probe+0x154/0x334 [ 3.753524] LR is at hisi_dsi_probe+0x144/0x334 [ 3.758058] pc : [] lr : [] pstate: 20000145 [ 3.765460] sp : ffffffc0364d7bd0 [ 3.765989] usb 1-1: new full-speed USB device number 2 using dwc2 [ 3.774957] x29: ffffffc0364d7bd0 x28: ffffffc0364502e0 [ 3.780290] x27: ffffffc036450000 x26: 0000000000000088 [ 3.785620] x25: 0000000000000000 x24: ffffffc037bcde10 [ 3.790952] x23: ffffffc034ff1000 x22: ffffffc000cda000 [ 3.796283] x21: ffffffc034ff2400 x20: ffffffc000bf9dd0 [ 3.801615] x19: ffffffc034f7a818 x18: 000000000000000e [ 3.806945] x17: 0000000000000001 x16: 0000000000000007 [ 3.812277] x15: 00000000000ed580 x14: 0fffffffffffffff [ 3.817608] x13: 0000000000000001 x12: 0101010101010101 [ 3.822940] x11: 7f7f7f7f7f7f7f7f x10: fefefeff52434c53 [ 3.828271] x9 : ffffffffffffffff x8 : 0000000000000002 [ 3.833602] x7 : 0000000000000000 x6 : 0000000000000000 [ 3.838933] x5 : 000000000000fffd x4 : 0000000000000000 [ 3.844264] x3 : 0000000000000000 x2 : ffffffffffffffb8 [ 3.849595] x1 : ffffffc034ff1000 x0 : ffffffc034f90400 [ 3.854926] [ 3.856417] Process kworker/u16:0 (pid: 6, stack limit = 0xffffffc0364d4058) [ 3.863472] Stack: (0xffffffc0364d7bd0 to 0xffffffc0364d8000) [ 3.869225] 7bc0: 364d7c10 ffffffc0 00508120 ffffffc0 [ 3.877412] 7be0: 34ff2410 ffffffc0 00bf9c10 ffffffc0 00000000 00000000 00bfa000 ffffffc0 [ 3.885601] 7c00: 00bf9c38 ffffffc0 00000006 00000000 364d7c40 ffffffc0 00506400 ffffffc0 [ 3.893790] 7c20: 00cda000 ffffffc0 34ff2410 ffffffc0 00000000 00000000 37bcde10 ffffffc0 [ 3.901979] 7c40: 364d7c80 ffffffc0 00506600 ffffffc0 00bf9c38 ffffffc0 34ff2410 ffffffc0 [ 3.910167] 7c60: 005065a0 ffffffc0 00bfa000 ffffffc0 00000000 00000000 00c36594 ffffffc0 [ 3.918356] 7c80: 364d7ca0 ffffffc0 005048bc ffffffc0 00000000 00000000 34ff2410 ffffffc0 [ 3.926543] 7ca0: 364d7ce0 ffffffc0 00506360 ffffffc0 34ff2410 ffffffc0 34ff2410 ffffffc0 [ 3.934732] 7cc0: 34ff2470 ffffffc0 005062e0 ffffffc0 36693ed0 ffffffc0 34804b28 ffffffc0 [ 3.942920] 7ce0: 364d7d10 ffffffc0 00505984 ffffffc0 34ff2410 ffffffc0 34ff2410 ffffffc0 [ 3.951110] 7d00: 00bfa660 ffffffc0 00505970 ffffffc0 364d7d40 ffffffc0 00505de8 ffffffc0 [ 3.959298] 7d20: 34ff2410 ffffffc0 00bfa3d0 ffffffc0 00bfa3a8 ffffffc0 00505de0 ffffffc0 [ 3.967486] 7d40: 364d7d70 ffffffc0 000c9518 ffffffc0 00bfa408 ffffffc0 36421640 ffffffc0 [ 3.975674] 7d60: 36450000 ffffffc0 34914e00 ffffffc0 364d7dc0 ffffffc0 000c9f8c ffffffc0 [ 3.976190] usb 1-1: not running at top speed; connect to a high speed hub [ 3.976818] hub 1-1:1.0: USB hub found [ 3.976906] hub 1-1:1.0: 3 ports detected [ 3.998496] 7d80: 36421640 ffffffc0 36421670 ffffffc0 36450018 ffffffc0 36450000 ffffffc0 [ 4.006684] 7da0: 364d4000 ffffffc0 00c36594 ffffffc0 36450018 ffffffc0 00000088 00000000 [ 4.014873] 7dc0: 364d7e30 ffffffc0 000ce65c ffffffc0 364cbe40 ffffffc0 00c4a0b0 ffffffc0 [ 4.023060] 7de0: 00a5a438 ffffffc0 36421640 ffffffc0 000c9e4c ffffffc0 00000000 00000000 [ 4.031248] 7e00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.039435] 7e20: 00a5a438 ffffffc0 00a5be28 ffffffc0 00000000 00000000 000843d0 ffffffc0 [ 4.047625] 7e40: 000ce580 ffffffc0 364cbe40 ffffffc0 00000000 00000000 00000000 00000000 [ 4.055811] 7e60: 00000000 00000000 364cbe40 ffffffc0 00000000 00000000 00000000 00000000 [ 4.064000] 7e80: 00000000 00000000 36421640 ffffffc0 00000000 ffffffc0 00000000 ffffffc0 [ 4.072189] 7ea0: 364d7ea0 ffffffc0 364d7ea0 ffffffc0 00000000 ffffffc0 00000000 aaaaaaaa [ 4.080377] 7ec0: 364d7ec0 ffffffc0 364d7ec0 ffffffc0 00000000 00000000 00000000 00000000 [ 4.088564] 7ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.096753] 7f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.104939] 7f20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.113128] 7f40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.121316] 7f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.129505] 7f80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.137691] 7fa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.145880] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 [ 4.154067] 7fe0: 00000000 00000000 00000000 00000000 8aaeaaaa aaaaaaaa aaaaaaaa aaaaaaab [ 4.162252] Call trace: [ 4.164700] [] hisi_dsi_probe+0x154/0x334 [ 4.170280] [] platform_drv_probe+0x48/0xb8 [ 4.176033] [] really_probe+0x7c/0x220 [ 4.181350] [] __device_attach+0x5c/0x6c [ 4.186843] [] bus_for_each_drv+0x50/0x94 [ 4.192420] [] device_attach+0x9c/0xc0 [ 4.197738] [] bus_probe_device+0x8c/0xb4 [ 4.203316] [] deferred_probe_work_func+0x74/0xac [ 4.209592] [] process_one_work+0x140/0x40c [ 4.215344] [] worker_thread+0x13c/0x470 [ 4.220837] [] kthread+0xd8/0xf0 [ 4.225635] Code: f9002e74 f941c262 aa1703e1 f941be60 (f9407443) [ 4.231772] ---[ end trace 3c9440643d5ceb84 ]--- [ 4.236441] Unable to handle kernel paging request at virtual address ffffffffffffffd8 [ 4.244366] pgd = ffffffc000d10000 [ 4.247769] [ffffffffffffffd8] *pgd=0000000000000000, *pud=0000000000000000 [ 4.254754] Internal error: Oops: 96000005 [#2] PREEMPT SMP [ 4.260330] Modules linked in: [ 4.263395] CPU: 2 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.18.0 #1 [ 4.270803] task: ffffffc0364aa0c0 ti: ffffffc0364d4000 task.ti: ffffffc0364d 4000 [ 4.278295] PC is at kthread_data+0x4/0xc [ 4.282307] LR is at wq_worker_sleeping+0x14/0xd8 [ 4.287015] pc : [] lr : [] pstate: 800001c5 [ 4.294417] sp : ffffffc0364d7560 [ 4.297732] x29: ffffffc0364d7560 x28: ffffffc000820000 [ 4.303064] x27: ffffffc0364aa5f0 x26: ffffffc000ba3040 [ 4.308395] x25: ffffffc000cb6000 x24: ffffffc0364d4000 [ 4.313727] x23: ffffffc000ba3040 x22: ffffffc037b1a040 [ 4.319058] x21: ffffffc0364aa0c0 x20: ffffffc037b1a040 [ 4.324388] x19: 0000000000000002 x18: 000000000000000e [ 4.329720] x17: 0000000000000001 x16: 0000000000000007 [ 4.335051] x15: 000000000000000e x14: 0000000000000013 [ 4.340382] x13: 000000000000001a x12: ffffffc0364d76a0 [ 4.345713] x11: 000000000000003c x10: 0000000000000000 [ 4.351045] x9 : 0000000000000050 x8 : 0000000000000000 [ 4.356375] x7 : 00000000d6d6a3e8 x6 : 0000000000000fc8 [ 4.361707] x5 : 0000000000000400 x4 : 0000000000000000 [ 4.367038] x3 : 000000000000000f x2 : ffffffc000c4a148 [ 4.372369] x1 : 0000000000000002 x0 : 0000000000000000 [ 4.377700] [ 4.379190] Process kworker/u16:0 (pid: 6, stack limit = 0xffffffc0364d4058) [ 4.386245] Stack: (0xffffffc0364d7560 to 0xffffffc0364d8000) [ 4.391998] 7560: 364d7590 ffffffc0 0080c5dc ffffffc0 00000002 00000000 364aa0c0 ffffffc0 [ 4.400187] 7580: 364d7590 ffffffc0 00000002 00000000 364d7740 ffffffc0 0080c7d4 ffffffc0 [ 4.408375] 75a0: 364d7388 ffffffc0 364aa0c0 ffffffc0 364aa4e8 ffffffc0 364aa0b0 ffffffc0 [ 4.416565] 75c0: 00000001 00000000 364d77c0 ffffffc0 364aa4e8 ffffffc0 00000011 00000000 [ 4.424753] 75e0: 36486c80 ffffffc0 364aa0b0 ffffffc0 364d7630 ffffffc0 000d745c ffffffc0 [ 4.432942] 7600: 00a5cda8 ffffffc0 00c365bd ffffffc0 0080c7d4 ffffffc0 0008bb94 ffffffc0 [ 4.441130] 7620: 00000001 00000000 00000140 00000000 364d7660 ffffffc0 00440104 ffffffc0 [ 4.449318] 7640: c9026800 ffffffbd 36702640 ffffffc0 0040af0c ffffffc0 3586dac0 ffffffc0 [ 4.457506] 7660: 364d7670 ffffffc0 001afd88 ffffffc0 364d76c0 ffffffc0 0040af0c ffffffc0 [ 4.465694] 7680: 36702640 ffffffc0 36702650 ffffffc0 00000140 00000000 00000140 00000000